Smarfid Security Equipment LE3821356MHZ Magic MINI Legic Reader User Manual

Shanghai Smarfid Security Equipment Co., Ltd. Magic MINI Legic Reader

User Manual

Legic Advant Magic Series ReaderDesign & TechnologiesNumber pad use “touching sensor”, the latesttechnology and individual number backlit whentouch.Economical Mini Magic can be mullion mount.Display Magic can provide customer a fullseries of choicesFront plate customization and back lit design isavailable.Design with End User logo is possible.Support on-site Reader Configuration Card tochange certain parameters.OLED Display allow user to see the messageclearly under direct sunlight.Door Bell function for Number pad reader.Tamper protectionFriendly Installation“Touch” number pad does notcarry any moving parts, whichimplies more durable.All weather proof design withIP65 certificate.Universal back plate allowsthe reader be installed ondifferent size of gang box.Non-drop bottom screw madeservicing handier.Metal back plate allows thereader install on metal surfaceand back-to back withoutaffecting the read range.All input and output signals areprotected against staticcharges.和输出信号受到防静电保护Reverse power protection.接保护Stainless steel Securityscrew is an optionAll inputs are 12Vdcprotected.Display reader can display CSN/UID number orProgrammed Card Number or user Name whenthe user card is present.* (Supported MultipleLanguages)Mini MagicRead both UID and Segment of all the Legiccard; plus, the UID of Felica and iCLASSA PIN can be set inside the card to authenticatewith the reader so that “Card + PIN” mode canbe implemented without relying on thecontroller.*
Model Number: X1X2N1N2N3– N4X3ModelFunctionsStandard & Mini ReaderKeypad ReaderDisplay ReaderConfigurable FunctionsRe-configure Window5 seconds (Default) or Half an hour after Power upReader Output FormatCSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed IDWiegand Plus WidthDifferent choices to fit with different Controller’s requirementsKeypad OutputN/ADefinableDefinableBuzzer ControlReader & Controller control (Default) or Controller control onlyLED/Back lit ControlDefine different LED color response base on Green LEDN/ADisplay ClockSynchronization.N/AN/AH/W resetVia RS485 TimeSyn S/WTechnical SpecificationsTypical Read range3 – 6 cmReader Standard OutputWiegand (RS232 & RS485 optional)Standard Keypad outputN/AWiegand with 4 bits burstWiegand with 4 bits burstDisplayN/AN/AOLED DisplayDisplay MessageN/AN/AAccess Granted, AccessDenied, Enter PIN;Time;Card NumberWiring Distance150m (22 AWG with shielded cable)120m (22 AWG with shielded cable)Operating Specification:Operating Voltage9 - 15VDCOperating Current150mA (max)Operating Temperature-30℃-70℃Exterior dimension (Mini)84.05*54.05*16.5mmCase materialPC+ABSStandard ColorBlackOperating Humidity10% - 90%Weight (Mini)160gRF TechnologiesReader Appearance and FunctionX1X2LE = Legic TechnologyN13 = Normal Reader ; 5 = Display ReaderN22 = Normal Size8 = Mini SizeN32 = Read UID / Card Number3 = Segment reading (Token might required)N43 = Terminal (for Display Reader)8 = PigtailX3N = No Number pad; K = Number pad
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecouldvoid the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.

Navigation menu