Smarfid Security Equipment MG3821356M Magic MINI Mifare Reader User Manual

Shanghai Smarfid Security Equipment Co, Ltd. Magic MINI Mifare Reader

User Manual

Mifare & ISO14443A-4 UID Magic Series Reader Design & Technologies Number pad use “touching sensor”, the latest technology and individual number backlit when touch. Economical Mini Magic can be mullion mount. Display Magic can provide customer a full series of choices Front plate customization and back lit design is available. Design with End User logo is possible. Support on-site Reader Configuration Card to change certain parameters. OLED Display allow user to see the message clearly under direct sunlight. Door Bell function for Number pad reader. Tamper protection Friendly Installation “Touch” number pad does not carry any moving parts, which implies more durable. All weather proof design with IP65 certificate. Universal back plate allows the reader be installed on different size of gang box. Non-drop bottom screw made servicing handier. Metal back plate allows the reader install on metal surface and back-to back without affecting the read range. All input and output signals are protected against static charges. 和输出信号受到防静电保护 Reverse power protection. 接保护 Stainless steel Security screw is an option All inputs are 12Vdc protected. Display reader can display CSN/UID number or Programmed Card Number or user Name when the user card is present.* (Supported Multiple Languages) Display Magic Standard Magic Mini Magic Number pad Magic Read both CSN and Sector of Mifare card and FULL UID of Mifare Plus and DesFire card. A PIN can be set inside the card to authenticate with the reader so that “Card + PIN” mode can be implemented without relying on the controller.*
Model Number: X1 X2 N1 N2 N3 – N4 X3 Model Functions Standard & Mini Reader Keypad Reader Display Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Plus Width Different choices to fit with different Controller’s requirements Keypad Output N/A Definable Definable Buzzer Control Reader & Controller control (Default) or Controller control only LED/Back lit Control Define different LED color response base on Green LED N/A Display Clock Synchronization. N/A N/A  H/W reset  Via RS485 TimeSyn S/W Technical Specifications Typical Read range 3 – 5 cm Reader Standard Output Wiegand (RS232 & RS485 optional) Standard Keypad output N/A Wiegand with 4 bits burst Wiegand with 4 bits burst Display N/A N/A OLED Display Display Message N/A N/A  Access Granted, Access Denied, Enter PIN;  Time;  Card Number Wiring Distance 150m (22 AWG with shielded cable) 120m (22 AWG with shielded cable) Operating Specification: Operating Voltage 10 - 15VDC Operating Current 150mA (max) Operating Temperature -30℃-70℃ Exterior dimension (Mini) 115.5*84.5*20.5mm (84.05*54.05*16.5mm) Case material PC+ABS Standard Color Black Operating Humidity 10% - 90% Weight (Mini) 210g (160g) RF Technologies Reader Appearance and Function X1X2 MW = Mifare Technology N1 3 = Normal Reader ; 5 = Display Reader N2 2 = Normal Size 8 = Mini Size N3 2 = Read UID / Card Number 3 = Reader Sector (HF Only) N4 3 = Terminal (for Display Reader) 8 = Pigtail X3 N = No Number pad; K = Number pad
FCC STATEMENT1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may causeundesired operation.2. Changes or modifications not expressly approved by the party responsible for compliancecouldvoid the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications.However, there is no guarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.Consult the dealer or an experienced radio/TV technician for help.

Navigation menu