Smarfid Security Equipment SSMW35 Slender Series 13.56 MHz Reader User Manual 15020078 use manual

Shanghai Smarfid Security Equipment Co, Ltd. Slender Series 13.56 MHz Reader 15020078 use manual

15020078 use manual

Design & TechnologiesNumber pad use “touching sensor”, the latesttechnology and individual number backlit whentouch.Economical mullion mounts type.Support on-site Reader Configuration Card tochange certain parameters.Door Bell function for Number pad reader.Tamper protectionDesign with customer logo is possible.Mifare & ISO14443A-4 UID Slender Series ReaderAPINcanbesetinsidethecardtoauthenticate with the reader so that “Card +PIN” mode can be implemented withoutEasily see under dark environment.Could be use as a door locationFriendly Installation“Touch” number pad does notcarry any moving parts, whichimplies more durable.All weather proof design withIP65 certificate.Universal back plate allowsthereaderbeinstalledondifferent size of gang box.Non-drop bottom screw madeservicing handier.All input and output signals areprotected against staticcharges.Reverse power protection.Stainless steel Securityscrew is an optionAll inputs are 12Vdcprotected.Read both CSN and Sector of Mifare card andFULL UID of Mifare Plus and DesFire card.
FCC Caution.§ 15.19 Labelling requirements.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device maynot cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation.§ 15.21 Information to user.Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authorityto operate the equipment.§ 15.105 Information to the user.Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Model Number: X1X2N1N2N3–N4X3RF Technologies Reader Appearance and FunctionX1X2MW = Mifare + Mifare UID + DesFire UIDN13 = Normal ReaderN25 = Normal ReaderN32 = Read UID / Card Number3 = Reader Sector (HF Only)N48 = PigtailX3N = No Number pad; K = Number pad
Operating Specification::ModelFunctions Standard Reader Keypad ReaderConfigurable FunctionsRe-configure Window 5 seconds (Default) or Half an hour after Power upReader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed IDWiegand Plus Width Different choices to fit with different Controller’s requirementsKeypad Output N/A DefinableBuzzer Control Reader & Controller control (Default) or Controller control onlyLED/Back lit Control Define different LED color response base on Green LEDTechnical SpecificationsTypical Read range >5 cm (Base on different technology)Reader Standard Output Wiegand (RS232 & RS485 optional)Standard Keypad output N/A Wiegand with 4 bits burstWiring Distance 150m (22 AWG with shielded cable)Wiring Distance 13.56MHz；ISO14443A-4Operating Voltage 10 - 15VDCOperating Current 150mA (max)Operating Temperature -30℃-70℃Exterior dimension 150*53*25 mmCase material PC+ABSStandard Color BlackOperating Humidity 10% - 90%Weight 180g

Navigation menu