Smart Device Technology IOT3288E IoT-3288E User Manual

Shenzhen Smart Device Technology Co., LTD IoT-3288E

User Manual

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF E xposure guidelines, This equipment should b e
installed and operated with m inimum distance between 20cm the radiator your bod y: Use
only the supplied antenna.
The EUT antenna is external antenna, through card buckle connect to board, external antenna is plastic,
antenna Gain 2dBi, impedance 50Ω. It comply with the standard requirement.
Manufacturer'sName:ShenzhenSmartDeviceTechnologyCo.,LTD
IoT3288E
Modelnumber:IoT3288E
OperatingTemperature:‐20°Cto40°C
Thisdeviceincompliancewiththeessentialrequirementsandotherrelevantprovisionsof
Directive2014/53/EU.Allessentialradiotestsuiteshavebeencarriedout.

1.TheproductshallonlybeconnectedtoaUSBinterfaceofversionUSB2.0
2.ThedevicecomplieswithRFspecificationswhenthedeviceusedat20mmformyourbody
FunctionOperationFrequencyMax RF
outputpower
Limit
BT3.02402~2480MHz6.89dBm20dBm.
BT4.02402~2480MHz4.63dBm20dBm.
WIFI802.11b/g/n(20MHz):2412~2472MHz 14.21dBm20dBm.
ThisproductcanbeusedacrossEUmemberstates.

Navigation menu