Smart Technologies and Investment SMARTPGD628F Electronic lock with BLE & fingerprint User Manual PGD628 SMT000 EB 180714
Smart Technologies & Investment Ltd Electronic lock with BLE & fingerprint PGD628 SMT000 EB 180714
User Manual
About Lockly Secure Plus and Secure Pro
Lockly Secure Plus and Secure Pro are keyless smartlocks equipped with the patented PIN
Genie, which is a peep proof and hidden camera proof algorithm software. Lockly makes
your life easier and safer.
For digital versions and instructional videos, please visit the folowing link:
Lockly Smart Lock - Secure Plus (PGD628)
Lockly Smart Lock - Secure Pro (PGD628F)
U.S. Patent No. 9,665,706
Other Patents Pending With All Rights Reserved
PGD628 | PGD628F
USER’S MANUAL
2.2 Product Overview - Inside
SECTION 2.2
SECURE PLUS | SECURE PRO
Interior Handle
Reset Button
Program Button
Battery Compartment Cover
Battery Compartment
4 x AA Alkaline Batteries
(Included)
Keypad Display Switch
2.3 Understanding Your New Lock
SECTION 2.3
The Default Access Code is
NOTICE 1 2 3 4 5 6
After the installation of your new Lockly Secure Plus / Pro, understanding some key functions
of operating your smart lock is important. The following guides will walk you through resetting
a lock, adding Access Codes, deleting Access Codes, adding and deleting fingerprints
(applicable to Secure Pro only) and also how to configure your OMK (Offline Magic Key).
For any questions you can always visit http://support.lockly.com for assistance.
Don’t forget that the Secure Plus and Secure Pro works best with our iOS and Android app.
Please download the app by visiting the link below.
Scan or visit Lockly.com/app
2.4 Factory Reset
SECTION 2.4
In order to restore the Lockly Secure to factory default settings, you must have your “Initial
Code” available. The Initial Code can be found on the VIP Card that came with your smart
lock.
After you have the Initial Code ready, push the reset button on the back panel of the Lockly
Secure to perform your reset. See below to see which Reset Process applies for you. Once the
smart lock has been reset, all the data previously stored will be deleted.
2.5 Keypad Display Switch
The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the back
panel (interior) of the smart lock. When it is
switched off, people who are outside cannot enter
any access codes to unlock the door.
Reset Button
2.6 Rebooting Lockly Secure
SECTION 2.6
NOTICE
Reboot Lockly in case of dead battery or malfunction. No
settings will be changed and all Access Codes will still be
stored within Lockly.
Press and release the reboot button when you want to reboot the lock. Your Lockly will beep
once after reboot. Only reboot when necessary.
To reboot, find the reboot button located on the bottom of the exterior side of Lockly Secure.
The reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert the paper
clip and press down firmly.
2.7 Low Battery
SECTION 2.7
When the battery is in seriously low condition, Lockly Secure will make continuous beeping
sounds in addition to the flashing low battery icon on the touch screen. You should replace
batteries immediately to avoid your smart lock from shutting down.
Dead Battery
Condition Indicator Solution
Low Battery
.
Battery Icon on the display keypad
will light up to indicate low battery.
Replace batteries immediately to
avoid battery failure. Lockly
Secure can still operate up to 300
cycles in low battery condition.
When there is no display and sounds;
and screen is non-functional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily
activate the lock.
9V Battery
-
+
Your Lockly Secure will automatically
detect the battery polarity, so just hold
and place your 9V battery leads in place
against bottom of the Lockly Secure to
temporarily activate the screen to enter
your Access Code. Be sure to hold the
9V battery against the contact points
located at the bottom of the lock until
you have successfully unlocked your
door with your Access Code. Once
unlocked, batteries should be replaced
immediately.
2.8 Changing The Battery
SECTION 2.8
Under normal use, the Lockly Secure’s battery will last up to a year. Please check battery
levels regularly and change your batteries when the low battery notification is issued. For
best practice, always use new batteries.
Open the battery compartment cover and insert four (4) new AA alkaline batteries as shown.
+
+
-
+
-
-
+
-
AA 1.5V X 4
123
- Make sure the batteries are oriented correctly.
- Replacing the batteries do not reset stored Access Codes.
-
To avoid having to reset the unit and Access Codes, insert new batteries within 15 minutes
of removing old batteries.
3.1 Configuring Access
SECTION 3.1
The Default Access Code is
NOTICE 1 2 3 4 5 6
Your new Lockly Access Code can be any combination of 6 to 8 digits.
Once a new Access Code is entered, the Default Access Code of 123456 would be deleted.
A Maximum of 10 sets of Access Codes can be stored for use.
How to Use the Keypad
There are a total of five (5) buttons on the keypad as
shown in the example image to the left. The numbers in
each button may differ than what is shown on your
device than what is displayed here.
To enter your required digit, just simply press the circle
where your number is shown. You do not need to press
the actual number as anywhere within the circle will
suffice.
The button on the bottom is the OK button. You will be
pressing this button when you are done entering your
Access Code.
OK Button
3.2 Entering Programming Mode
SECTION 3.2
Program Button
Add Access Code
ModeNumber
Delete Access Code
View Access Code
To enter Programming Mode, remove
the battery compartment cover on the
interior side of the Secure to expose the
Reset and Program buttons.
Simply press the Program button to
enter programming mode.
Note: Program button will be disabled
once synced to a smart phone. Config-
ure all settings via synced smart phone.
To end Programming Mode, press the Program button anytime.
Programming Mode will automatically exit if the keypad is inactive for more than thirty
(30) seconds.
After entering Programming Mode, you should
see the screen as displayed to the right on your
Lockly keypad. Follow the following steps to add,
delete, or check your Access Codes.
3.3 Adding an Access Code
SECTION 3.3
While in Programming Mode,
select “1AD” to add an Access
Code. If you are not in Pro-
gramming Mode, please see
Section 3.2 to enter Program-
ming Mode.
After pressing “1AD” press
“Pd” to add an Access Code.
Enter your new 6 - 8 digit Access Code and press
when you are finished. You will then re-enter the code
to confirm your new Access Code.
Remember, just touch the digit you need within the circle
around each 3 numbers. There is no need to touch the
exact location of the number. For example, based on the
example image to the left, if you need “1”, you can touch the
upper left button or the lower right button. For “6”, you
would touch the upper right button.
3.3 Adding an Access Code (Continued)
SECTION 3.3
If you have successfully entered your new Access Code
twice, you will see the new code displayed here. In this exam-
ple, we chose 654321. Press to Confirm or
to cancel.
To exit or cancel, you can always press or
If the two (2) Access Codes you entered does not match,
an error message will appear on the screen (As shown to
the left). Press OK to return to the Programming Screen
and try again. See Section 3.3
OK Button
3.4 Deleting an Access Code
SECTION 3.4
While in Programming Mode,
select “2DE” to delete an
Access Code. If you are not in
Programming Mode, please
see Section 3.2 to enter Pro-
gramming Mode.
After pressing “2DE” press
“Pd” to delete an Access
Code.
OK Button
Example Only
Active Access Codes will then be displayed on the screen
in sequence from left to right, top to bottom. In the exam-
ple shown on the left, the Access Code displayed is
1 3 5 7 9 0 .
Rotate through different Access Codes shown by touching
any number on the screen. If you find the Access Code
you want to delete, simply hold the OK button for 2 sec-
onds. (Continue on next page)
3.4 Deleting an Access Code (Continued)
SECTION 3.4
Once you have selected the Access Code you want to
delete, Lockly will ask you to confirm deletion by showing
you the Access Code you are deleting, in this example,
1 3 5 7 9 0.
Press to delete, or to cancel.
There are two incidents where your Access Code cannot be deleted.
NOTE
Only one Active Access CodeNo Access Codes Set
There are no Access Codes set.
The factory default Access Code
cannot be deleted.
There is only one (1) Access Code saved in the
smart lock. At least one code must be registered.
Please add another Access Code before attempting
to delete the existing code.
3.6 Adding a Fingerprint (Secure Pro Only)
SECTION 3.6
While in Programming Mode,
select “1AD” to add an Access
Code. If you are not in Pro-
gramming Mode, please see
Section 3.2 to enter Program-
ming Mode.
After pressing “1AD” press
“FP” to register a Fingerprint.
3.5 Checking the Access Codes
SECTION 3.5
While in Programming Mode, select
“3CH” to check registered Access
Codes. If you are not in Programming
Mode, please see Section 3.2 to enter
Programming Mode.
Active Access Codes will then be
displayed on the screen in sequence
from left to right, top to bottom. In the
example shown on the left, the Access
Code displayed is 1 3 5 7 9 0 .
OK Button
Rotate through the different Access Codes by touching any number on the screen.
To exit Check Access Code screen, simply press the OK button.
If there are no Access Codes registered in your smart lock,
Check Access Code mode will be invalid. The default
Access Code will not be shown on the display keypad, and
you will see the following screen shown to the left instead.
In this section, you will learn how to register a fingerprint to your new smart lock. Fingerprint
registration is only available in the Lockly Secure Pro, and not available in Secure and Secure
Plus models. If you have Secure Plus, you may skip to Section 4.1 to learn about locking and
unlocking your door with Lockly.
We are using an advanced biometric sensor, providing the most secure fingerprint authentication.
For security reasons, Lockly will only accept fingerprint patterns that consist of cross intersection
points. Patterns with no cross intersection points will not be acceptable.
Please check your fingers before registration to make sure the finger you want to register will be
acceptable by our system. Otherwise, use an alternative finger to ensure successful registration.
The following examples show which types of fingerprint patterns will be acceptable. It is highly
recommended to enroll at least one finger from each hand in case the hand you are using is
unavailable, such as, in instances like if you are holding items in that hand or have sustained an
injury. Upon pressing “FP”, you will enter Fingerprint Registration Mode and you will see a green
LED ring light up on the fingerprint panel on the exterior side of Lockly Secure Pro.
3.6 Adding a Fingerprint (Continued)
SECTION 3.6
Once you’re in Fingerprint Registration Mode you will see
two numbers displayed on keypad. The top number is your
Fingerprint Registration number, in this example to the left,
“1”. The bottom number will always start with a “6”.
You must successfully scan your fingerprint six (6) times for it
to properly register. Every time you scan your fingerprint, the
number on the bottom will change, starting from 6 - then 5, 4,
3, 2, 1, until the fingerprint is successfully registered.
Note: For reference, please keep a record of your fingerprint
registration number to distinguish whom it was registered to.
The Secure Pro can register up to ninety-nine (99) fingerprints. Please read the following sec-
tions if you want to add or delete fingerprints.
Fingerprint Pattern with
Cross Intersection Lines
Concentric or Parallel Pattern
with no Cross Intersection Lines
Fingerprint with Scars or
Worn Out Ridges
OK Not OK Not OK
SECTION 3.6
Top View
Side View
3.7 Fingerprint Scanning Directions (Continued)
SECTION 3.7
OK
OK
3.7 Fingerprint Scanning Directions
SECTION 3.7
The fingerprint sensor equipped in Lockly Secure Pro is loaded with powerful fingerprint
algorithms to extract quality features from fingers, even in poor conditions. Placing your
finger on the sensor correctly helps consistency in fingerprint recognition. The following
directions and tips will guide you on how to scan an optimal fingerprint image.
Sensor
Core
Position your finger on the
center of the sensor
3.6 Adding a Fingerprint (Continued)
Scan your finger by lightly placing your designated finger on the sensor until you hear a beep.
Lift your finger and repeat the process slowly until the digit “6” shown on the screen
becomes “1”. If you have successfully scanned and registered your fingerprint, you will hear
a long beep, and the Bluetooth icon will flash green.
PASS will show on the keypad and press OK to exit. If you did not successfully register your
fingerprint, FAIL will show on the keypad. If FAIL is displayed, press OK to return to the
previous screen to rescan your finger.
For instructions on scanning an optimal fingerprint, please proceed to Section 3.7.
OK Button
NOTICE
Please make sure your fingers are clean from dirt and oils
before scanning your fingerprint. Make sure the sensor is
also clean by taking a soft cloth and wiping the surface.
Correct Incorrect
3.8 Fingerprint Scanning Tips & Troubleshoot
SECTION 3.8
Tips for Fingerprint Enrollment and Recognition
• Place your finger to completely cover the sensor with maximum contact surface.
• Position the center of your finger (core) to the center of the sensor.
• Hold your finger still for more than a second until you hear a beep.
• Scan a finger that is clean and free from dirt. If a finger is cracked and dry, lightly moisten
the finger to improve recognition.
• Children ages 12 and under are not recommended to use fingerprint access due to the
constant changes of their fingers during growth.
• Elderly with fading fingerprints may have difficulty in recognition.
• If your finger has a cut, scar, or cracked skin due to dryness, try another finger.
Troubleshooting Fingerprints
In case of poor fingerprint conditions
• If wet - wipe excess moisure from finger before scanning
• If dry - moisturize or blow warm breath over finger before scanning
• If dirty - wipe stains and dirt off from finger before scanning
• Make sure the sensor is clean from dirt or smudges - wipe sensor with soft cloth regularly
For more troubleshooting help, visit http://support.lockly.com
3.9 Deleting Stored Fingerprints
SECTION 3.9
While in Programming Mode,
select “2DE” to delete a Finger-
print. If you are not in Program-
ming Mode, please see Section
3.2 to enter Programming Mode.
After pressing “2DE” to delete,
press “FP” to delete a fingerprint.
Your registered fingerprint
numbers will be displayed on
the screen. Tap number to
rotate to the next registered
fingerprint. When you have
found the fingerprint ID you
want to delete, press and hold
the OK button for 2 seconds to
delete. (Example shown - “02”)
You will then see a confirmation
page displaying and
with the fingerprint number
you are deleting displayed in
the lower left. Select Y to
delete or N to cancel.
OK Button Fingerprint ID Number
4.1 Locking/Unlocking Lockly with Access Codes
SECTION 4.1
Lockly Secure series can be unlocked using 1 of 4 ways - via your stored Access Code,
registered fingerprint (Secure Pro only), smartphone with Bluetooth, or with the physical
key supplied with your lock.
OK Button
Three consecutive wrong attempts will put Lockly in “Safe Mode”. (See Section 4.5)
Lock your Lockly Secure by pressing the OK Button anytime when the door is closed.
Lockly Secure will also auto-lock after five (5) seconds after unlocking and opening.
Slide your hand across the screen to activate the
keypad.
Enter your 6 to 8 digit Access Code followed by
the OK button. Press OK anytime to reset if you
entered the wrong digit.
If the Access Code entered is correct, the door will
unlock. If the Access Code entered is incorrect,
Lockly will beep twice.
Hold OK Button (3 sec)
You may toggle between two types of keypad displays to
enter your Access Code. The fixed digit version and
the PIN Genie version (Recommended). Press and
hold the OK Button for 3 seconds to toggle back and
forth between the two keypads.
PIN Genie Fixed Digit
4.2 Locking/Unlocking Lockly with Fingerprints
SECTION 4.2
Place a registered finger to the fingerprint
scanner located on the exterior side of the
lock to the right.
To register a fingerprint, please see Section
3.6.
If your fingerprint is registered and acknowl-
edged, you will hear a “beep” sound and a
Green LED will light up on the fingerprint
scanner. You can then push down the handle
and open the door.
If you see a Red LED, it means your fingerprint
is not recognized. You must wait until the red
LED is off to try again.
For best fingerprint scanning practices, see
Section 3.7.
To lock the Lockly Secure, press the OK Button
anytime when the door is opened.
OK Button
Locking
Unlocking
4.3 Locking/Unlocking Lockly with App
SECTION 4.3
Scan or visit Lockly.com/app
You must have the Lockly iOS or Android app installed in order to lock and unlock with the
smartphone app. Please first download the app from the correct store.
Please see the smartphone app manual to follow instructions on how to connect your app to
your lock via Bluetooth and learn how to lock / unlock the door using the app.
4.4 Locking/Unlocking Lockly with Physical Key
SECTION 4.4
Exterior View
To unlock your Lockly using the physical key (supplied), open the key cover on the
handle by turning the cover counter clockwise 90 degrees to reveal the keyhole.
Insert your key and turn clockwise or counter clockwise to lock or unlock the door.
4.5 Safe Mode - Overview
SECTION 4.5
Lockly will enter Safe Mode when three (3) consecutive wrong Access Codes are entered within
5 minutes. When in Safe Mode, the lock status icon will start to flash.
To disable Safe Mode, you must unlock the door using the correct fingerprint (Secure Pro) or
enter the correct Access Code twice in a row. Activate the keypad by pressing and holding
for 3 seconds.
Once the screen is activated, enter the correct Access Code carefully twice, pressing after
every time.
If you enter the wrong code, the keypad will then be disabled for 10 minutes.
Countdown Prompt
(Displayed in Minutes)
Will start with 10 and
countdown until 0.
You will see a “10” on the screen, notifying the number of minutes that the keypad is disabled
for. After 10 minutes, you may attempt to enter the correct Access Code to unlock the door.
After the second incorrect attempt to unlock the lock with the wrong Access Code, Lockly will
disable the keypad for 20 minutes, displaying a “20” on the screen. After the third wrong
attempt to unlock the door with the correct Access Code, the screen will be disabled for 30
minutes. (Example A and Example B above).
Note: In order to conserve power, the countdown prompt will only be displayed for 3 seconds.
You can reactivate the screen by sliding your hand across the screen.
Example A Example B
4.5 Disabling Safe Mode
SECTION 4.5
There are three (3) ways to disable Safe Mode.
Option 1 - Entering Correct Access Code
Enter the correct Access Code twice (2) when the keypad is available, pressing
after every time the Access Code is entered.
Option 2 - Lockly Bluetooth App
Use the app that is synced to your Lockly to disable Safe Mode by unlocking the door. If
you have not downloaded the app to use with your smart lock, you won’t be able to use this
option to disable Safe Mode.
Option 3 - Screen ON/OFF Switch
The Safe Mode can be switched off using the screen on/off switch at the back on your lock.
While in Safe Mode, the keypad will not be lit up when you are using your Physical Key.
6.1 Important Notes
SECTION 6.1
Auto Lock Feature
Lockly Secure is programmed to auto-lock after five (5) seconds of opening the door.
You can always manually lock by pressing the button anytime located on the bottom
of the keypad.
9V Backup Access
When your Lockly Secure is out of power, you can temporarily activate the key pad by
using a 9V battery against the bottom of the exterior side of the smart lock. Please see
Section 2.6 for more info.
Physical Keys
Even though you have your fingerprints registered (Secure Pro only) and Access Codes
stored, it’s always best practice to carry your physical keys with you at all times in case for
any reason, Lockly falls into Safe Mode.
Initial Code / VIP Card
You may find a VIP Card with an Initial Code included in your package. It is very crucial
that you do not lose this card. Please store this card safely as you will need the default
Initial Code on that card to master reset your lock in case, for any reason, you have lost the
phone paired to Lockly and also forgot your Access Code.
8.1 Safety Precautions
SECTION 8.1
Please read all instructions carefully. Remind all Lockly users of the safety precautions.
Read the following instructions for your own safety
Do not attempt to disassemble the smart lock by yourself. It can cause product
damage, void warranty, and cause injuries.
Do not use any inappropriate tools that can cause damages or malfunction to
your lock.
Always make sure your door is securely closed and locked when you leave your
house to prevent unwanted entry.
Please keep your Access Codes safe. Restrict access to the back panel of your
smart lock and check your settings regularly to ensure Access Codes have not
been changed without your knowledge.
Always dispose of used batteries according to your local laws. DO NOT BURN.
7.1 Cleaning
SECTION 7.1
Making sure your Lockly is clean is best practice to ensure optimal product use. Follow the
DOs and DON’Ts below.
DO DON’T
• Rinse the touchscreen with warm
water prior to cleaning.
• Use the application of soap with
a damp, lukewarm cloth.
• Airdry or wipe dry with a soft
microfiber cloth to avoid scratches.
• Don’t use abrasives, high alkaline
cleaners, or gasoline to clean your
lock.
• Don’t apply cleaning detergent
directly in sunlight or at high tem-
peratures.
• Don’t leave cleaning detergent on
the display keypad for long periods
of time - wash immediately.
• Don’t use scrapers, squeegees,
or razors.
Unauthorized changes and modifications may void your product warranty. If you
have questions or any problems while using your Lockly Secure Smart Lock,
contact our customer service department at help@lockly.com or visit
http://support.lockly.com for technical assistance.
SECTION 8.1
Warning：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE 1:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2:
Any changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Certified
Low Battery
Indicator
If Paired with App If Never Paired
Press Reset Button
for one (1) second
Open the Lockly
smartphone app to
add your lock using
the Initial Code
Press Reset Button
for three (3) seconds
Reboot Button
http://support.lockly.com
Patented Anti-Peep Keypad
Digits are randomly displayed on the key pad ensuring access codes to be undetectable to
intruders after repeated use. To experience the patented and innovative key pad software, powered
by PIN Genie, please download the PIN Genie Vault App from iOS App Store or Google Play.
Multiple Access Codes & Monitoring
Store up to 8 Access Codes for family, friends, and guests, as well as monitor entry and exit
records.
Advanced 3D Fingerprint Recognition (Secure Pro Only)
Biometric Fingerprint Recognition protocol allows up to 99 registered fingerprints to be used and
accepts only actual fingerprints - preventing lifted prints from being used.
Complete Privacy
The exterior displayed keypad can be locked and switched off using the simple ON/OFF toggle from
the inside panel. The owner can prevent others trying to input the passcode from the outside and
entering the home
OMK (Offline Magic Key)
The offline magic key can allow owners to issue access codes, set the allowed access duration, all
without Lockly ever connecting to the internet, so in case of power outage, you can still magically
and remotely issue Access Codes without any connection to the web.
Automatic Lock
Owners no longer have to worry about forgetting to lock the door. With Auto Lock enabled, Lockly
Secure Plus and Secure Pro will automatically re-lock the door after 5 seconds.
Backup Keys and 9V Battery Socket
The door can be opened with physical backup keys. There is also a 9V battery connection socket
for emergency power backup to access the key pad in case your smart lock runs out of battery.
1.1 Product Features
SECTION 1.1 1
2.1 Product Overview - Outside
SECTION 2.1
Key Hole Cover
9V Battery Backup Socket
Key Hole
Touchscreen
Keypad Buttons
Exterior Handle
Fingerprint Sensor
23
4567
8910 11
12 13 14 15
16 17 18 19
20 21 22 23
24 25 26 27 28
5.1 OMK - Offline Magic Key
SECTION 5.1
The Offline Magic Key (OMK) is a unique feature to the Plus and Pro Series. It allows you to
grant access to guests remotely without guests needing to download the app.
To use the OMK feature, make sure you download the Lockly app for iOS or Android first, and
sync your smart lock to your mobile device.
From there, you can then issue an Offline Magic Key within the app.
Go to “Access Management” and choose “Add a New Offline Magic Key (OMK)” and
follow on screen instructions to generate your Offline Magic Key.
Understanding OMK Codes
Each lock can issue up to 50 OMK Access Codes before you have to reset and reissue
another set of 50 codes. Your app will generate some to follow directions automatically for your
guests to use.
OMK Codes are issued to the guest by asking them to enter a 6 digit number, followed by a 4
digit number, followed again by a 4 digit number, entering in between every set of
numbers. See the following example.
234567+0987 0987
Guests’ Access Codes OMK Configuration Number
Sample OMK Codes
Once a sequence like the one above is entered, it automatically activates an OMK Access
Code to be used for a specific duration of time. In the example above, the Guest’s Access
Code will be 234567 to unlock the door. 0987 is the Configuration Number that sets the total
duration of the Access Code, whether it’s a 1 time use code, 1 hour duration code, or 30
Days.
29 30 31 32 33
LATCH EDITION
Table of Contents
TABLE OF CONTENTS
2.1 Product Overview - Outside
2.2 Product Overview - Inside
2.3 Understanding Your New Lock
2.4 Factory Reset
2.5 Keypad Display Switch
2.6 Rebooting Lockly Secure
2.7 Low Battery
2.8 Changing The Battery
Section 1 - Product Highlights
Section 2 - Product Overview
Section 3 - Using Your Smart Lock
3.1 Configuring Access
3.2 Programming Mode
3.3 Adding an Access Code
3.4 Deleting an Access Code
3.5 Checking an Access Code
3.6 Adding a Fingerprint
3.7 Fingerprint Scanning Directions
3.8 Fingerprint Tips & Troubleshooting
3.9 Deleting Stored Fingerprints
Section 4 - Locking and Unlocking
1.1 Product Features 4.1 Locking / Unlocking using Access Codes
4.2 Locking / Unlocking using Fingerprint
4.3 Locking / Unlocking using App
4.4 Safe Mode - Overview
4.5 Disabling Safe Mode
Section 5 - Advanced Features (OMK)
5.1 OMK - Offline Magic Key
Section 6 - Important Notes
6.1 Important Notes
Section 7 - Cleaning
7.1 Cleaning
Section 8 - Safety Precautions
8.1 Safety Precautions
For additional support, visit http://support.lockly.com
or email help@lockly.com
1
2
3
4
5
6
5
7
8
9
10
11
13
15
16
19
21
22
23
24
25
26
27
29
30
31
32
ERP机型：PL3562Q-GL-SMT00010A-V1
Designed：曹显贵 Date：2018-07-14
描述:
说明书:PL
3562Q/PGD628，SMT000,REV.A,211.3x211.3mm,
80g书纸,
双面2C印刷
，18页36面装订本，“PGD628|PGD628F”，RoHS2.0,REACH,Prop65，POPs，PAHs
ERP P/N：
REV：0.1
KCMC
封面 封底