Smart Technologies and Investment STGTOAQ201NB Narrow Band Receiver (318MHz Rx) User Manual

Download:
Mirror Download [FCC.gov]
Document ID	712199
Application ID	66v31SaVUCKkT61Se2HutQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.56kB (156989 bits)
Date Submitted	2006-10-04 00:00:00
Date Available	2006-10-04 00:00:00
Creation Date	2006-09-18 15:05:43
Document Lastmod	2006-09-18 15:05:50
Document Title	User Manual

Operating Instruction
1. Installing the Receiver
* Mount the Receiver upside up as the left figure.
* Connect the RED wire to power sdpply +5V and the
BLACK wire to power supply common GND.
* The GREEN wire is DATA output for control unit not
included.
2. Operating the Receiver
* Use a standard 318MHz RF transmitter not included to remote control
the receiver.
” When the receiver receives the signal from transmitter. then the GREEN
data wire will output the demodulated data.
GTO, inc, Part Number: AOZOT-NB and AGZOZ-NB
GTO, Inc, narrow band receiver models AQ201 -NB and AQ202~NB are designed to be used with all GTOIPRO and Mighty Mule
brand gate opener products together with your GTO and Mighty Mule narrow band transmitters, The narrow band transmitter
can be identified by its color, gray. li‘ you have an older model transmitter, or another brand. please contact our Customer
Service Department at 800-543-4283.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interierence in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmlul
interference to radio communications,
However. there is no guarantee that interierence will not occur in a particular installation, If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
iollowing measures:
‘ Reorisnt or relocate the receiving antenna.
' Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different irom that to which the receiver is connected.
- Consult the dealer or an experienced radio/T V technician for help,
GTO, lno. - 3121 Hartsl’ield Road -Tailahassee, FL 32303
13006434283 - www.gloihc.cpm 
Made in China "
GTO, Inc. Part Number: A0201-NB and AQZDz—NB
GTO, Inc. narrow band receiver models A0201~NB and A0202~NB are designed to be used with all GTO/PFiO and Mighty Mule
brand gate opener products together with your STD and Mighty Mule narrow band transmitters. The narrow band transmitter
can be identified by its color, gray. if you have an older model transmitter, or another brand. please contact our Castomer
Service Department at 80064341283,
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital dei/ioe,
pursuant to Part 15 ot the FCC Rules. These limits are designed to provide reasonable protection against
harmful lnterterence in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, it not installed and used in accordance wilh the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation, If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment oil and on, the user is encouraged to th/ to correct the interference by one or more of the
following measures:
~ Hecrient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
' Consult the dealer or an experienced radiofi V technician for help,
GTO, inc. ~ 3121 Hartsiield Hoad ~ Tallahassee, FL 32303
1-800-543-4283 - www,gtcinc.com 
Made in China ‘

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Modify Date                     : 2006:09:18 15:05:50+08:00
Create Date                     : 2006:09:18 15:05:43+08:00
Metadata Date                   : 2006:09:18 15:05:50+08:00
Format                          : application/pdf
Document ID                     : uuid:0914fa42-a3df-43fc-b6c3-798d602d2835
Instance ID                     : uuid:c4423fbd-d1b5-4ff0-90a7-b7296eb07f8e
Page Count                      : 2

EXIF Metadata provided by EXIF.tools