Smart eye Digital Electronics 620GB IP Camera User Manual

Shenzhen Smart-eye Digital Electronics Co.,Ltd IP Camera

User Manual

                              User manual  1 / 24             X Series  User Manual Jan, 2015       V1.0                 Please read and understand this manual before attempting installation of the product.
                              User manual  2 / 24   If the user manual doesn’t help you to solve the problem, please call our technology center for technical support.     1.  Installation Environment    Keep away from the places for high-temperature, heat source and direct sunlight;   Keep away from water and if wet, power off immediately.   Avoid using in the damp environment; the reference range for operation humidity is below 85%RH.   Avoid  using  in  too  hot  or  too  cold  environment,  the  reference  range  for  operation temperature is -10℃~ +40℃   Please  install  it  horizontally  or  wall  mount,  avoid  strenuous  vibration  and  do  not  place other items on top of the unit.   2.  Transport and Handling    Please handle the item carefully.   Do not move the item between too hot and too cold areas.   Please disconnect the item from the mains before moving.   Notice:  1.  Do not fall down the camera or beat it strongly. 2.  Do not touch the optical components for the image sensor, such as the lens, if necessary, please place a clean and moistened cloth with alcohol and wipe the dirt gently; When not in use, please place the dust cover onto the item to protect the image sensor. 3.  Do not aim the camera directly into the sun or at other intense light sources that could affect the image quality, this will also shorten the service life for the image sensor. 4.  Keep away from laser when it is working, otherwise the image sensor can be damaged. 5.  If the equipment is not working properly, please contact the store or the service centre, do not disassemble or modify the equipment in any way.   Statement Notice
                              User manual  3 / 24 Index1Product Introduction ............................................................................................................... 41.1.Product Overview ....................................................................................................... 41.2.Product Exposition ..................................................................................................... 42Device Connection ................................................................................................................. 62.1.Connection Diagram .................................................................................................. 62.2.Wi-Fi Setting ................................................................................................................ 62.2.1.configure via network cable connection ...................................................... 62.2.2.WPS/QSS One key configure Wi-Fi ............................................................ 62.2.3.Mobile Phone Setting ..................................................................................... 73View Video by Browser .......................................................................................................... 83.1.Access to camera webpage and install Plug-in ..................................................... 83.2.Browse Video .............................................................................................................. 94Query and Playback SD Record by Browser ................................................................... 104.1.Playback Video ......................................................................................................... 105Device Configuration and Local Setting ............................................................................ 105.1.Device Configuration ................................................................................................ 105.1.1.System ........................................................................................................... 105.1.2.Network .......................................................................................................... 135.1.3.Audio and Video ........................................................................................... 165.1.4.Safety ............................................................................................................. 185.1.5.Alarm .............................................................................................................. 185.1.6.Storage ........................................................................................................... 205.1.7.Log .................................................................................................................. 225.2.Local Setting .............................................................................................................. 23
                              User manual  4 / 24 1  Product Introduction 1.1. Product Overview Thank you for choosing X series high definition SmartP2P IP Camera, the IP Camera combines a high definition  digital video camera  with network connectivity  and  a powerful  web server  to  bring high definition video to your desktop from anywhere on your local network or over the Internet. It includes indoor HD PTZ camera, indoor HD cube camera, outdoor HD waterproof camera etc. It is very suitable for home, shops, offices and so on.  Product features:   Support High profile H.264 encoding, 3 kinds of resolution video stream simultaneously, suitable for Local, Internet and Cross-platform view;   Support Wi-Fi protocol 802.11b/g/n;   Support WPS/QSS one key Wi-Fi configuration;   Support one touch Wi-Fi configuration on mobile phone before connect to the network;   Support  max.  64G  SD/TF  card  storage  for  the  alarm  video  and  pictures,  timing  snapshot  and recording, support MP4 format;   Built-in web server, use one port to send all the data, users can facilitates network setting;   Support IE/Firefox/Chrome/Safari browser to view video and configure deice;   Support P2P private network through transmission via manufacturer cloud platform;   Provide IOS/Android mobile phone Apps;   Provide Windows/Mac OS PC client software.    1.2. Product Exposition Please  check  carefully  if  all  listed  items  are  included  in  the  package,  it  includes  camera,  power adapter, network cable, installation bracket. If anything missing, please contact vendor in time.  The camera functions maybe different due to different product model, the main functions as below:  Main chip and sensor: Due to main control chip and sensor is different, so the camera support different resolution:720P, 1080P and above;  Power input port:Check power supply if 5V or 12V. Plug right power supply, or it will damage the camera or cannot run. We suggest to use the default power adapter.  RJ45 Port:Network port;  Wi-Fi function: The device features Wi-Fi function, built-in  Wi-Fi  module  and  antenna.  The  Wi-Fi antenna  includes  built-in  Wi-Fi  antenna,  integration  antenna,  separated  antenna  and  so  on.  The separated antenna would be packed with the camera in the gift box, users should install it to camera before it works.    IR-CUT:A filter switching device, from day and night to switch to a different filter, then forbid or allow the infrared light in, which make the picture more true;  Lens: Due to focus length of lens is different, so vision angle of lens is different. Please twist the
                              User manual  5 / 24 lens for best effect if the video is fuzzy;  PTZ: Control PTZ remotely, view video from several vision angle. Some device have PTZ function and some device have not PTZ due to the product cover is different, and PTZ moving angle maybe different;  SD socket:Some product use SD socket and some use MicroSD socket due to the products cover are different, Max support 64GB memory card;  MIC inside:Can collect the sound from camera workplace;  Speaker inside:can play sound from device start, talking and alarm;  Audio in port:If the camera without MIC in it, you can connect extra MIC to collect sound;  Audio out port:If the camera without speaker in it, you can connect extra sound systems;  Alarm in port:Connect with switchable sensor, check sensor signal if high or low to judge if detect any event;  Alarm out Port: Connect with external alarm device, control device alarm action when detect any event;  Reset button: After the camera started, press and hold the reset button for at least 10 seconds, it restores default settings and  reboot;  press  and  hold the reset button for 3  seconds  to  set up the Wi-Fi by using  WPS/QSS;  press the reset  button briefly, the Wi-Fi indicator  will flashes for  a few seconds  while  the  camera  was  connecting  with  Wi-Fi  connection,  you  can  assess  Wi-Fi  signal intensity by the flash frequency, the faster flash, the stronger signal;  Wi-Fi indicator:Blue LED for Wi-Fi indicator that be used to display Wi-Fi work state, such as off, slow flash, fast flash, steady work etc;  Work status indicator:Red LED is operation indicator that displays the state of equipment,there are off, slow    flash and flashlights flash, when someone access video,otherwise slow flash;  POE function:The function that supply power to camera through network cable. But you need the camera  with  POE  module.  the  device  connect  to  POE  switcher  by  a  network  cable  and  POE switcher supply power for device through the network cable;   PIR function:The device with PIR sensor, used for detect the human movement, it trigger alarm if detect any abnormal.
                              User manual  6 / 24 2  Device Connection 2.1. Connection Diagram  Figure1 Power on the camera by attaching the power adapter, and then connect the camera and router by network cable, so you can visit the camera via computer in LAN and view camera video as <<3. View video by browser>> You  can  also  connect  camera  and  router  by  Wi-Fi,  you  need  to  configure  Wi-Fi  of  the  camera as<<2.2 Wi-Fi Setting>>.  2.2. Wi-Fi Setting You can setting up the Wi-Fi as the following three way. 2.2.1.  Configuration via network cable connection Connect the camera and router by network cable as Figure1, please login the camera as <<3.View video  by  browser>>,  access  to  system  configuration  interface  to  finish  the  setting  as<<5.1.2.3  Wi-Fi setting>>.Pull up the network cable, then you can connect the router by Wi-Fi. 2.2.2.  WPS/QSS One key configure Wi-Fi   Power on the camera and wait for 1 minute, the camera started, hold on reset button 3 seconds, and  then  click  “WPS/QSS”  button  of  the  router,the  camera  and  router  will  be  configured  Wi-Fi  as WPS/QSS protocol, after configuration successfully,  the blue Wi-Fi indicator of the  camera  will quickly flash several times,  and then it will be connected to router automatically and the  blue  indicator  will be  IP Camera Router Computer IP Camera Smartphone Internet Local Network
                              User manual  7 / 24 always on. Notice: Due to some router do not support WPS/QSS function, so you can not use the configuration way.  Figure2 2.2.3.  Mobile Phone Setting Install the iSmartViewPro App in android phone or iPhone at first,Open the App, access to More interface, select “One key configure Wi-Fi” and fill in Wi-Fi SSID and password, and then click configure to finish the setting as Figure3.   Figure3 Tips:   Before configuration, please power on the camera, after 5 minutes, you can configure the camera (blue  Wi-Fi  indicator  flash  slowly),otherwise  you  can’t  configure,  and  must  power  on  the  camera again;   Move mobile phone speaker to camera MIC, click Configure;(please confirm if the camera have MIC, otherwise the configuration will be unsuccessfully)   After  configuring  successfully,  the  blue  Wi-Fi  indicator  will  flash  several  times  quickly,  and  then connect to router automatically and the blue indicator is always on. You can click Configure several times when the configuration is unsuccessfully.
                              User manual  8 / 24 3  View Video by Browser 3.1. Access to camera webpage and install Plug-in Double click to Open the “SearchPro” in the attached CD and click Search as Figure4.  Figure4 Select the founded device and double click it to open to view in the browser, enter user name and password at popup dialog to login camera webpage as Figure5. Tips: default username/password:admin/12345, please modify the password for safety.  Figure5   Need to download plug-in when first use, click “download plug-in” as figure 6, click Run to install it.
                              User manual  9 / 24  Figure6 3.2. View Live Video Access to Live Video interface, it plays video automatically as Figure7.  Figure7         Close video  Open video  Open monitor  open talking  Snapshot  Record  Hide PTZ control panel  First Stream  Second Stream  Third Stream  Horizon Cruise  Vertical Cruise  Stop Cruise  Preset setting  Call Preset  Empty
                              User manual  10 / 24 4  Query and Playback SD Record by Browser 4.1. Playback Video Click Playback Video to access to SD record playback interface, click record date which you want to query  ,click  Search  to  list  recording  file,  select  one  to  playback  it,  also  can  click  download  button  to download the file as Figure8.  Figure8  5  Device Configuration and Local Setting 5.1. Device Configuration 5.1.1.  System 5.1.1.1. Device Status You can view current user, network connection way, Mac address, SD status and internet ip address of the camera as Figure9.
                              User manual  11 / 24  Figure9 5.1.1.2. Time Setting  Figure10 5.1.1.3. PTZ Setting You  can  set  up  PTZ  speed,  cruise  circles  (1-10  turns)  and  disable  motion  detection  when  PTZ moving as Figure11.  Figure11
                              User manual  12 / 24 5.1.1.4. Other Setting You can turn off the status LED of the camera and Wi-Fi status LED in other setting as Figure12.  Figure12 5.1.1.5. System Maintenance The system maintenance includes system setting and timing reboot setting. You can set up reboot, backup setting, restore backup setting, upgrade camera and timing reboot etc as Figure13.  Figure13 5.1.1.6. Device Information You can modify device name and check system firmware version, system firmware time and Web UI firmware here as Figure14.  Figure14
                              User manual  13 / 24 5.1.2.  Network 5.1.2.1. IP Address Setting You  can  modify  IP  address  of  the  camera  etc,  the  default  is  DHCP,achieve  automatically  as Figure15.  Figure15 5.1.2.2. Port Setting You can change webpage http port here as Figure16.  Figure16 5.1.2.3. Wi-Fi Setting Click  Search,  and  switch  on  enable  Wi-Fi,  select  the  wireless  router  you  want  to  connect,  enter password  of  the  router,  click  Save  to  finish  the  Wi-Fi  configuration.  Click  Test  to  test  if  it  can  be connected to the router after finishing the configuration as Figure17.
                              User manual  14 / 24  Figure17 5.1.2.4. Port Forwarding Access  to  port  forwarding,  you  can  enable  UPNP  port  forwarding  and  check  the  status  of  it  as Figure18.  Figure18 5.1.2.5. DDNS Setting You can enable manufacturer’s DDNS and set up third party DDNS (the third party DDNS support 3322.org/Dyndns.org/No-ip.com now, the manufacturer provide a free DDNS for every camera.
                              User manual  15 / 24  Figure19 5.1.2.6. RTSP Setting You can set up RTSP port, also can close RTSP authentication as Figure20.  Figure20 You can view video by some general RTSP stream media software, for example, VLC. The visit link as below: First stream:rtsp://user:password@IP:rtsp port/live/ch0 Second stream:rtsp://User:password@IP:rtsp port/live/ch1 Third stream:rtsp://user:password@IP:rtsp port/live/ch2 5.1.2.7. FTP Setting Access to FTP setting, please fill in relative FTP parameters as the following case to achieve the FTP transfer as Figure21.  Figure21
                              User manual  16 / 24 5.1.2.8. SMTP(E-mail)Setting Please fill in relative parameters as the following case to achieve the E-mail transfer, as Figure22.  Figure22 5.1.3.  Audio and Video 5.1.3.1. Video Encoding Setting Access to Video Encoding setting, you can set up AC frequency and video stream as Figure23. AC frequency: 50HZ and 60HZ optional; Video stream: Bit rate(256~4096kbps),frame rate(1~30fps)、video encoding control etc; Tips: you can set up the video with audio or not.
                              User manual  17 / 24 Figure23 5.1.3.2. Volume Setting Access to Volume setting, you can adjust the volume of MIC and speaker as Figure24.  Figure24 5.1.3.3. Image Setting Access to Image Setting, you can flip and mirror the image, also can adjust the brightness, contrast, saturation and hue of image for getting best color effect as Figure25.  Figure25 5.1.3.4. OSD Setting Access to OSD setting, you can overlay the time and name in Live video as Figure26.
                              User manual  18 / 24 Figure26 5.1.3.5. Night vision Settings Access to Night vision Settings, you can set up IR LED and IRCUT as Figure27.  Figure27 5.1.4.  Safety Access to User management, you can add or edit the user as Figure28.  Figure28 Tips: After setting up, click save and refresh button, the entering info will display in the webpage. 5.1.5.  Alarm 5.1.5.1. IO Detect Access to IO detector, can enable detect function and set up input signal type as Figure29.  Figure29 5.1.5.2. Motion Detection Access to motion detection, you can set up Max 4 detection area, also can set up the sensitivity for every area as Figure30.
                              User manual  19 / 24  Figure30 5.1.5.3. Audio Detection Access to audio detection, you can enable audio detection and set up sensitivity of it as Figure31.  Figure31 5.1.5.4. Linkage alarm setting You can set up IO detect,  motion detection and audio detect, it can linkage to trigger the action: snapshot to Email or FTP server or SD card, recording to FTP server or SD card, and trigger IO output as Figure32.  Tips: The usage for combination of alarm trigger in alarm trigger type: For  example,  you  enable  the  audio  detection  and  motion  detection,  so  the  camera  is  enabled combination of alarm trigger, it will perform the action in alarm action setting when the audio detect and motion detection detect any change.
                              User manual  20 / 24  Figure32 5.1.5.5. Protected duration setting After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration. You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day, 15 minutes per a block as Figure33.  Figure33 5.1.6.  Storage 5.1.6.1. SD Management Access to SD management, you can check and download recording and snapshot file in SD card, and check SD card remaining capacity, format SD as Figure34.
                              User manual  21 / 24  Figure34 5.1.6.2. SD card snapshot setting(Timing Snapshot) Access  to  setting  of  timing  snapshot  to  SD  card,  you  can  enable  SD  snapshot,  you  can  set  up snapshot time interval and snapshot duration; time format is 7 days, 24 hours per day, 15 minutes per a block as Figure35.  Figure35 5.1.6.3. SD Card Recording Setting Access to SD Card Recording Setting, you can enable SD recording and set up recording duration for every file; time format is 7 days, 24 hours, 15 minutes per a block as Figure36. Tips: it will overlay SD recording file automatically by default; it will overlay previous recording file when the SD space is full.
                              User manual  22 / 24  Figure36 5.1.7.  Log Access to Log menu, you can check the user operation log as Figure37.  Figure37
                              User manual  23 / 24 5.2. Local Setting Access  to  local  setting,  you  can  set  up recording  path,  snapshot  path  and  recording  duration  as Figure38. Tips:   You must use administrator to run the browse, then recording path and snapshot path can be save successfully at above IE9; the default recording path is D:\HYRec,snapshot path is D:\HYSnap.   You can enable show motion detection frame when viewing video.  Figure38
                              User manual  24 / 24 FCC Caution:   Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.    This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body  NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu