Smart eye Digital Electronics 754GA IP Camera User Manual User guide

Shenzhen Smart-eye Digital Electronics Co.,Ltd IP Camera User guide

User guide

Download: Smart eye Digital Electronics 754GA IP Camera User Manual User guide
Mirror Download [FCC.gov]Smart eye Digital Electronics 754GA IP Camera User Manual User guide
Document ID2907696
Application IDCGJBSHkpLlmueX1gc1V8UA==
Document DescriptionUser guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize82.79kB (1034905 bits)
Date Submitted2016-02-22 00:00:00
Date Available2016-02-22 00:00:00
Creation Date2015-11-23 16:40:02
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2016-01-21 22:38:17
Document TitleUser guide
Document CreatorAcrobat PDFMaker 9.1 Word 版
Document Author: lilong

Please read and understand this manual
before attempting installation of the product.
X Series
User Guide
November, 2015
V2.0
Statement
If the user manual doesn’t help you to solve the problem, please call our technology center for
technical support.
用户手册
Notice
1. Installation Environment

Keep away from the places for high-temperature, heat source and direct sunlight;

Keep away from water and if wet, power off immediately.

Avoid using in the damp environment; the reference range for operation humidity is below
85%RH.

Avoid using in too hot or too cold environment, the reference range for operation
temperature is -10℃~ +40℃

Please install it horizontally or wall mount, avoid strenuous vibration and do not place
other items on top of the unit.
2. Transport and Handling

Please handle the item carefully.

Do not move the item between too hot and too cold areas.

Please disconnect the item from the mains before moving.
Notice:
1.
Do not fall down the camera or beat it strongly.
2.
Do not touch the optical components for the image sensor, such as the lens, if necessary,
please place a clean and moistened cloth with alcohol and wipe the dirt gently; When not
in use, please place the dust cover onto the item to protect the image sensor.
3.
Do not aim the camera directly into the sun or at other intense light sources that could
affect the image quality, this will also shorten the service life for the image sensor.
4.
Keep away from laser when it is working, otherwise the image sensor can be damaged.
5.
If the equipment is not working properly, please contact the store or the service center, do
not disassemble or modify the equipment in any way.
6.
If the equipment is not working properly, please contact the store or the service center, do
not disassemble or modify the equipment in any way.
用户手册
Index
Product Introduction .................................................................................................................... 1
1.1. Product Overview ............................................................................................................ 1
1.2 .Product Exposition .............................................................................................................. 1
Device Connection....................................................................................................................... 3
2.1.
2.2.
Connection Diagram ....................................................................................................... 3
Wi-Fi Setting ..................................................................................................................... 3
2.2.1.
Configuration via network cable connection ................................................. 3
2.2.2.
WPS/QSS One key configure Wi-Fi ............................................................... 3
2.2.3.
Mobile Phone Setting ......................................................................................... 4
View Video by Browser ............................................................................................................... 5
3.1. Select View Mode in web............................................................................................... 5
3.2. View Live Video................................................................................................................ 6
Query and Playback SD Record by Browser......................................................................... 8
4.1. Playback Video ................................................................................................................ 8
Device Configuration and Local Setting.................................................................................. 8
5.1. Device Configuration ...................................................................................................... 8
5.1.1.
System ................................................................................................................... 8
5.1.1.1. Device Status ............................................................................................. 8
5.1.1.2. Time Setting ............................................................................................... 9
5.1.1.3.
5.1.1.4.
5.1.1.5.
Pan&Tilt Setting ......................................................................................... 9
Others Setting .......................................................................................... 10
Multiple Settings ...................................................................................... 10
5.1.1.6. System Maintenance .............................................................................. 11
5.1.1.7. Device information .................................................................................. 12
5.1.2.
Network ............................................................................................................... 12
5.1.2.1.
5.1.2.2.
5.1.2.3.
IP Address Setting................................................................................... 12
Port Setting ............................................................................................... 12
Wi-Fi Setting ............................................................................................. 13
5.1.2.4.
5.1.2.5.
5.1.2.6.
Port Forwarding ....................................................................................... 13
DDNS Setting ........................................................................................... 13
RTSP Setting............................................................................................ 14
5.1.2.7.
5.1.2.8.
5.1.2.9.
Onvif Setting .......................................................................................... 14
FTP Setting ............................................................................................... 15
SMTP(E-mail)Setting ........................................................................ 15
5.1.3.
Audio and Video ................................................................................................ 16
5.1.3.1. Video Encoding Setting ......................................................................... 16
5.1.3.2. Volume Setting ......................................................................................... 16
5.1.3.3.
5.1.3.4.
5.1.3.5.
Image Setting ........................................................................................... 16
OSD Setting.............................................................................................. 17
Night vision Settings ............................................................................... 17
5.1.4.
Security................................................................................................................ 18
Access to User management, you can add or edit the user as Figure31. ...18
5.1.5.
Alarm.................................................................................................................... 20
用户手册
5.1.5.1.
5.1.5.2.
IO Detect ................................................................................................... 20
Motion Detection ..................................................................................... 20
5.1.5.3.
5.1.5.4.
5.1.5.5.
Audio Detection ....................................................................................... 21
Linkage alarm setting ............................................................................. 21
Protected duration setting ..................................................................... 22
5.1.6.
Storage ................................................................................................................ 23
5.1.6.1. SD/TF Management ............................................................................ 23
5.1.6.2. SD/TF Capture setting(Timing Snapshot) .................................... 23
5.1.6.3. SD/TF Card Recording Setting ............................................................ 23
5.1.7.
Log........................................................................................................................ 24
5.2. Local Setting ................................................................................................................... 25
用户手册
1 Product Introduction
1.1. Product Overview
Thank you for choosing X series high definition SmartP2P IP Camera, the IP Camera combines a
high definition digital video camera with network connectivity and a powerful web server to bring
high definition video to your desktop from anywhere on your local network or over the Internet. It
includes indoor HD PTZ camera, indoor HD cube camera, outdoor HD waterproof camera etc. It is
very suitable for home, shops, offices and so on.
Product features:

Support High profile H.264 encoding, 3 kinds of resolution video stream simultaneously, suitable for
Local, Internet and Cross-platform view;

Support Flash Player to play video;

Support OCX plug-in to view video;

Support Wi-Fi protocol 802.11b/g/n;

Support WPS/QSS one key Wi-Fi configuration;

Support one touch Wi-Fi configuration on mobile phone before connect to the network;

Support max. 64G SD/TF card storage for the alarm video and pictures, timing snapshot and
recording, support MP4 format;

Built-in web server, use one port to send all the data, users can facilitates network setting;

Support IE/Firefox/Chrome/Safari browser to view video and configure deice;

Support P2P private network through transmission via manufacturer cloud platform;

Provide IOS/Android mobile phone Apps;

Provide Windows/Mac OS PC client software.
1.2. Product Exposition
Please check carefully if all listed items are included in the package, it includes 1camera, 1power
adapter, 1network cable,1CD,1Quick Installation Guide,1installation bracket. If anything missing, please
contact vendor in time.
The camera functions maybe different due to different product model, the main functions as below:

Main chip and sensor: Due to main control chip and sensor is different, so the camera support
different resolution:720P, 1080P and above;

Power input port:Check power supply if 5V or 12V. Plug right power supply, or it will damage the
camera or cannot run. We suggest to use the default power adapter.

RJ45 Port:Network port;

Wi-Fi function: The device features Wi-Fi function, built-in Wi-Fi module and antenna. The Wi-Fi
antenna includes built-in Wi-Fi antenna, integration antenna, separated antenna and so on. The
separated antenna would be packed with the camera in the gift box, users should install it to camera
before it works.

IR-CUT:A filter switching device, from day and night to switch to a different filter, then forbid or allow
用户手册
the infrared light in, which make the picture more true;

Lens: Due to focus length of lens is different, so vision angle of lens is different. Please twist the
lens for best effect if the video is fuzzy;(each lens of camera is focused well before deliverying, we
advise not to adjust the lens )

PTZ: Control PTZ remotely, view video from several vision angle. Some device have PTZ function
and some device have not PTZ due to the product cover is different, and PTZ moving angle maybe
different;

SD socket:Some product use SD socket and some use MicroSD socket due to the products cover
are different, Max support 64GB memory card;

MIC inside:Can collect the sound from camera workplace;

Speaker inside:can play sound from device start, talking and alarm;

Audio in port:If the camera without MIC in it, you can connect extra MIC to collect sound;

Audio out port:If the camera without speaker in it, you can connect extra sound systems;

Alarm in port:Connect with switchable sensor, check sensor signal if high or low to judge if detect
any event;

Alarm out Port: Connect with external alarm device, control device alarm action when detect any
event;

Reset button: After the camera started, press and hold the reset button for at least 10 seconds, it
restores default settings and reboot; press and hold the reset button for 3 seconds to set up the
Wi-Fi by using WPS/QSS; press the reset button briefly, the Wi-Fi indicator will flashes for a few
seconds while the camera was connecting with Wi-Fi connection, you can assess Wi-Fi signal
intensity by the flash frequency, the faster flash, the stronger signal;

Wi-Fi indicator:Blue LED for Wi-Fi indicator that be used to display Wi-Fi work state, such as off,
slow flash, fast flash, steady work etc;

Work status indicator:Red LED is operation indicator that displays the state of equipment,there
are off, slow

flash and flashlights flash, when someone access video,otherwise slow flash;
POE function:The function that supply power to camera through network cable. But you need the
camera with POE module. the device connect to POE switcher by a network cable and POE
switcher supply power for device through the network cable;

PIR function:The device with PIR sensor, used for detect the human movement, it trigger alarm if
detect any abnormal.
用户手册
2 Device Connection
2.1. Connection Diagram
Figure1

Power on the camera by attaching the power adapter, and then connect the camera and router by
network cable, so you can visit the camera via computer in LAN and view camera video as <<3.
View video by browser>>

You can also connect camera and router by Wi-Fi, you need to configure Wi-Fi of the camera
as<<2.2 Wi-Fi Setting>>.
2.2. Wi-Fi Setting
You can setting up the Wi-Fi as the following three way.
2.2.1. Configuration via network cable connection
Connect the camera and router by network cable as Figure1, please login the camera as <<3.View
video by browser>>, access to system configuration interface to finish the setting as<<5.1.2.3 Wi-Fi
setting>>.Pull up the network cable, then you can connect the router by Wi-Fi.
2.2.2. WPS/QSS One key configure Wi-Fi
Power on the camera and wait for 1 minute, the camera started, hold on reset button 3 seconds,
and then click “WPS/QSS” button of the router,the camera and router will be configured Wi-Fi as
WPS/QSS protocol, after configuration successfully, the blue Wi-Fi indicator of the camera will quickly
flash several times, and then it will be connected to router automatically and the blue indicator will be
用户手册
always on.
Notice: Due to some router do not support WPS/QSS function, so you can not use the configuration
way.
Figure2
2.2.3. Mobile Phone Setting
please make sure the smartphone is connected WiFi ,Install the iSmartViewPro App in android
phone or iPhone at first, open the App, access to More interface, select “One key configure Wi-Fi” and fill
in Wi-Fi password, and then click configure to finish the setting as Figure3.
Figure3
Tips:

Before configuration, please power on the camera, after 5 minutes, you can configure the camera
(blue Wi-Fi indicator flash slowly),otherwise you can’t configure, and must power on the camera
again;

Move mobile phone speaker to camera MIC, click Configure;(please confirm if the camera have
MIC, otherwise the configuration will be unsuccessfully)

After configuring successfully, the blue Wi-Fi indicator will flash several times quickly, and then
connect to router automatically and the blue indicator is always on. You can click Configure several
times when the configuration is unsuccessfully.
用户手册
3 View Video by Browser
3.1. Select View Mode in web
Double click to Open the “SearchPro” in the attached CD and click Search as Figure 4.
Select the founded device and double click it to open browser automatically, enter user name and
password at popup dialog to login camera webpage as Figure5.
Tips: default username/password:admin/123456, please modify the password for safety.
Figure5

View Video- Mode 1: APNPI view mode(OCX plug-in)
For ,It needs to download plug-in for first time ,as figure 6, click  to install it.
用户手册

Google browser version: 42 version or below.

Firefox browser version:43 version or below

Support IE browser IE 8,IE 9,IE 10,IE 11.
Figure6

View Video- Mode 2:Flash Player View Mode(Adobe Flash Player
plug-in)

If the browser was not installed Flash Player plug-in, there will be tips for downloading and
installation.

If select Mode 2,It doesn’t support multi-view, multi-area motion detection functions, etc.

Support Microsoft Edge browser.
3.2. View Live Video

If select“View Video- Mode 1”,It will enter into preview interface as Figure7
Figure7(View Video- Mode 1 preview interface)
用户手册
Stop video
Multiview
Play video
Listen
Show/Hide control panel
Cruise Horizontally
Cruise Vertically
Talk
Snapshot
Record
1920x1080/1280x720
Stop Cruise
Centre
Zoom in/out
640x360
320x180
Return to Homepage
Note:
1. You can view one or four video in a screen, need to set up the cameras in 5.1.1.5 multiple setting.
2. You can click
to zoom in and out the video, 1x, 2x, 3x, 4x optional.
3. The first stream will change to 1920x1080 or 1280x720 automatically according to different camera.

If select“View Video- Mode 2”,It will enter into preview interface as Figure8
Figure 8(View Video- Mode 2 preview interface)
Stop video
Play video
Cruise Horizontally

1920x1080/1280x720
Cruise Vertically
Stop Cruise
640x360
Centre
320x180
Return to Homepage
Notice: It doesn’t support manual listening, intercom, capture, recording and multi-view settings.
用户手册
4 Query and Playback SD Record by Browser
4.1. Playback Video
Click Playback Video to access to SD record playback interface, click record date which you want to
query ,click Search to list recording file, select one to playback it, also can click download button to
download the file as Figure 9.
Figure 9
5 Device Configuration and Local Setting
5.1. Device Configuration
5.1.1. System
5.1.1.1. Device Status
You can view current user, network connection way, Mac address, SD status and internet IP
address of the camera as Figure10.
用户手册
Figure10
5.1.1.2. Time Setting
You can do time setting,active “Synchronize with PC”etc.as Figure11.

When IP Camera is connected internet,it will auto adjust NTP server time.

After IP Camera is startup,it will auto adjust the time according to NTP server’s all addresses;after
that, it will auto adjust NTP server time per 30 minutes.
Figure11
5.1.1.3. Pan&Tilt Setting
In Pan/Tilt setting, you can set Pan/Tilt speed, cruise laps(1~10 laps) and whether enable or disabl
e motion detection alarm function when Pan/Tilt works. as Figure12
Call preset:
1.
preset 1-8 is the setting place after the camera restart.
用户手册
2.
Back to the place which is setted before camera restart: when you call preset NO.9, the camera
will be back to the place where power off or restart after finishing self-checking.
Figure12
5.1.1.4. Others Setting
You can turn off Status LED(Red) and Wi-Fi LED(Blue) of the camera in others setting as Figure13.
Figure13
5.1.1.5. Multiple Settings

It supports multi-view under“View Video- Mode 1”,The first device is current camera,You can add
3 more cameras,then you can view one or four cameras in one screen.as Figure14.

If select “View Video-Mode 2”, it will not support multi-view function setting。
用户手册
Figure14
5.1.1.6. System Maintenance
The system maintenance includes System setting and Restart timing setting. You can set up reboot,
backup setting, restore backup setting, upgrade camera and timing reboot etc as Figure15.
Figure15
用户手册
5.1.1.7. Device information
You can modify device name and check system firmware version, system firmware time and Web UI
firmware here as Figure16.
Figure16
5.1.2. Network
5.1.2.1. IP Address Setting
You can modify IP address of the camera here, there is no default IP address, it is DHCP.as Figure17.
Figure17
5.1.2.2. Port Setting
You can change webpage HTTP port here as Figure18.
Figure18
用户手册
5.1.2.3. Wi-Fi Setting
Click Search and enable Wi-Fi, then select the wireless router you want to connect, enter password
of the router, click Save to finish the Wi-Fi configuration. Click Test to check if your settings are
successful or not as Figure19.
Figure19
5.1.2.4. Port Forwarding
Access to port forwarding, you can enable UPNP port forwarding and check the status of it as
Figure 20.
Figure 20
5.1.2.5. DDNS Setting
You can enable manufacturer’s DDNS and set up third party DDNS (the third party DDNS support
用户手册
3322.org/Dyndns.org/No-ip.com now, the manufacturer provide a free DDNS for every camera.as
Figure21.
Figure21
5.1.2.6. RTSP Setting
You can set up RTSP port, also can off RTSP authentication as Figure 22.
Figure22
You can view video by some general RTSP stream media software, for example, VLC. The visit link as
below:
First stream:rtsp://user:password@IP:rtsp port/live/ch0
Second stream:rtsp://User:password@IP:rtsp port/live/ch1
Third stream:rtsp://user:password@IP:rtsp port/live/ch2
5.1.2.7. Onvif
Setting
Enter into Onvif setting interface, you can enable or disable Onvif authentification.As Figure 23.
Figure23
用户手册
5.1.2.8. FTP Setting
Access to FTP setting, please fill in relative FTP parameters as the following case to achieve the
FTP transfer as Figure24.
Figure24
5.1.2.9. SMTP(E-mail)Setting
Please fill in relative parameters as the following case to achieve the E-mail transfer, as Figure25.
Figure25
用户手册
5.1.3. Audio and Video
5.1.3.1. Video Encoding Setting
Access to Video Encoding setting, you can set up AC frequency and video stream as Figure26.
AC frequency: 50HZ and 60HZ optional;
Video stream: Bit rate (256~4096kbps), frame rate (1~30fps), video encoding control etc;
Tips: you can set up the video with audio or not.
Figure26
5.1.3.2. Volume Setting
Access to Volume setting, you can adjust the volume of MIC and speaker as Figure27.
Figure27
5.1.3.3. Image Setting
Access to Image Setting, you can flip and mirror the image, also can adjust the brightness, contrast,
saturation and hue of image for getting best color effect as Figure28
用户手册
Figure29
5.1.3.4. OSD Setting
Access to OSD setting, you can overlay the time and name in Live video as Figure29
Figure29
5.1.3.5. Night vision Settings
Access to Night vision Settings, you can set up IR LED and IRCUT as Figure30.
用户手册
Figure30
5.1.4. Security
5.1.4.1
User Setting
Access to User management, you can add or edit the user as Figure31.
Figure31
Tips: After setting up, click save and refresh button, the entering info will display in the webpage.
5.1.4.2
IP Flitering
You can set up the IP filtering to allow or deny some IP address to visit the device as below. As
Figure32.
In IP Address filter, there are 2 settings: blacklist and whitelist.

Whitelist: it allows the specified IP address to access the camera.

Blacklist:it refuses the specified IP address to access the camera.
用户手册
Figure32
5.1.4.3

Mask Area
“View Video-Mode 1”: the user can hide the specified area not to be monitored, Max.support 4
areas tobe hiden.As Figure33.

“View View-Mode 2”: It doesn’t support privacy setting .
用户手册
Figure33
5.1.5. Alarm
5.1.5.1. IO Detect
Access to IO detector, can enable detect function and set up input signal type as Figure34.
Figure34
5.1.5.2. Motion Detection

“View Video-Mode 1”:Access to motion detection, you can set up Max 4 detection area, also can
set up the sensitivity for every area as Figure35.
Figure35
用户手册

“View Video-Mode 2”:User only can set one area for motion detection,and input sensitivity,as
Figure36.
Figure36
Notice: the higher the sensitivity,the greater the number.
5.1.5.3. Audio Detection
Access to audio detection, you can enable audio detection and set up sensitivity of it as Figure36.
Figure36
5.1.5.4. Linkage alarm setting
You can set up IO detect, motion detection and audio detect, it can linkage to trigger the action:
snapshot to Email or FTP server or SD card, recording to FTP server or SD card, and trigger IO output as
Figure37.
用户手册
Figure37.
Tips: The usage for combination of alarm trigger in alarm trigger type:
For example, you enable the audio detection and motion detection, so the camera is enabled
combination of alarm trigger, it will perform the action in alarm action setting when the audio detect and
motion detection detect any change.
5.1.5.5. Protected duration setting
After setting up alarm detect type and alarm trigger linkage, you need to set up protected duration.
You must set up it, then the camera perform trigger linkage; the time format is 7 days, 24 hours per day,
15 minutes per a block as Figure38.
Figure38
用户手册
5.1.6. Storage
5.1.6.1. SD/TF Management
Access to SD/TF management, you can check and download recording and snapshot file in SD/TF
card, and check SD/TF card remaining capacity, format SD/TF as Figure39.
Figure39
5.1.6.2. SD/TF Capture setting(Timing Snapshot)
Access to SD/TF capture, you can enable timing snapshot and set up snapshot time interval and
snapshot duration; time format is 7 days, 24 hours per day, 15 minutes per a block as Figure 40.
Figure 40
5.1.6.3. SD/TF Card Recording Setting
Access to SD Card Recording Setting, you can enable SD recording and set up recording duration
用户手册
for every file; time format is as 7 days, 24 hours a day, 15 minutes per a block as Figure 41.
Tips: it will overwrite SD/TF recording file automatically by default, also overwrite previous recording
file when the SD/TF space is full.
Figure 41
5.1.7. Log
Access to Log menu, you can check the user operation log as Figure42.
Figure42
用户手册
5.2. Local Setting
Access to local configuration, you can set up recording path, snapshot path and recording duration
as Figure43.
Tips:

You must use administrator to run the browse, then recording path and snapshot path can be save
successfully at above IE9; the default recording path is D:\HYRec.

You can enable to show motion detection frame when viewing video.

If select 

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : lilong
Create Date                     : 2015:11:23 16:40:02+08:00
Modify Date                     : 2016:01:21 22:38:17+08:00
Subject                         : 
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Metadata Date                   : 2016:01:21 22:38:17+08:00
Creator Tool                    : Acrobat PDFMaker 9.1 Word 版
Document ID                     : uuid:938e9bc2-d093-4a17-af63-05bc7480cb11
Instance ID                     : uuid:885525a2-e8b5-4f13-a853-00f402fc77e3
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : lilong
Producer                        : Adobe PDF Library 9.0
Keywords                        : 
Source Modified                 : D:20151123083951
Company                         : QQ:289893348
Manager                         : 
Comments                        : QQ:289893348
Category                        : 
KSO Product Build Ver           : 2052-10.1.0.5372
Page Layout                     : OneColumn
Page Count                      : 30
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ZCB754GA

Navigation menu