Smart eye Digital Electronics 801RTB Battery Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4015745
Application ID	shg+ae6JvthtHjbA6lBbmw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	335.46kB (4193311 bits)
Date Submitted	2018-09-23 00:00:00
Date Available	2018-09-23 00:00:00
Creation Date	2018-09-07 17:11:17
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-09-18 17:41:00
Document Title	Users Manual
Document Creator	Adobe Illustrator CC 2017 (Windows)

Wire-Free Battery-Powered
1080P Indoor & Outdoor Home Security Camera
User Manual
B1 T1
Battery Camera
We keep improving the app, if the app interface is not accordance with the instructions,
please go to wansview website: http://www.wansview.com for the latest instructions.
What’s in the Box
Battery camera
Base bottom
Base station
Power adapter
Weathproof cover
Installation guide
Magnetic wall mount
3M tape
Mounting screws&Anchors
Product Diagram(Base Station)
Sync Button
WiFi Pair Button
Speaker
Memory card slot
Indicator Light
Microphone
Base Station
Speaker
Built-in 1W 8Ω
Microphone
Built-in
Micro Memory Card
Up to 128GB
Internet Connection
Wire-Free Connection
Max Number of Connected Cameras
Adapter Power
5V 2A
Dimensions
60*31.5*81.9mm
Weight
54g
Working Environment
-10°C to 50°C / 14°F to 122°F，RH≤95%
LED Indicator & Working Status(Base Station)
LED indicaton
OFF
working status
Sleep mode/Power Off
Solid on in red
NO Internet
Flashes red&blue slowly alternately
WIFI configuration
Solid on in blue
connected to internet
Flashes blue slowly
pairing mode
Flashes red quickly
Restore to factory setting
Button Controls(Base Station)
Botton
function
operation
Wi-Fi Configuration Button
Pair with the WIFI
Press and hold 5 seconds to enter pairing mode
with the LED indicator flashing red&blue slowly
Sync Button
pair with the camera
Press and hold 6-8 seconds to enter pairing mode
with the LED indicator flashing blue slowly
press the Wi-Fi Configuration Button
& Sync Button at the same time
Restore to factory settings
press and hold for 3 seconds
Product Diagram(Camera)
Microphone
2.0 MP Lens
Photoresistance
Night
vision LED
Lens
105°wide angle ,f=2.0
Sensor
1/2.7 inch
Resolution
1080P(1920*1080)Full HD Resolution
Microphone
Built-in
Speaker
Built-in 1W 8Ω
PIR Detection
Detection angle110
Battery life
Two 18650 Lithium batteries(not
include) last up to,Battery life will vary
based on device settings,
usage, and environmental factors.
Actual results may vary.
Battery
compartment
Weight
193g
Adapter Power
5V 2A or Two 18650 Lithium batteries
(not include )
Screw
Internet
2.4G Wi-Fi, Effective Range
Button
Battery Cover
Weather Proof
IP65
Dimensions
61.8*61.8*130.2mm
Working Environment
-10°C to 50°C / 14°F to 122°F，
RH≤95%
Motion sensor
Speaker
Indicateor light
Base
Sync Button
Camera
Micro USB
LED Indicator & Working Status (Camera)
LED indicaton
OFF
working status
Sleep mode/Power Off
solid on in red
Connected the Base station or charge the camera
flashes red & blue slowly
pairing mode
solid on in blue
fully charged
Button Controls(Camera)
Botton
function
operation
Sync Button
pair with the Base station
Press and hold 10 seconds to enter pairing mode
with the red&blue LED indicator flashing red&blue
slowly
Caution
· Use the included power adapters only to charge the camera and the base station within the permitted voltage range.
· Only the camera is waterproof. The base station and adapters are for indoor use only.
· Make sure the internet is functional and fast for live data feed.
· Do not use the product at temperatures higher or lower than the specified range.
· Do not use in environments with strong electromagnetic interferences or near corrosive substances.
· The warranty does not cover defects and damages caused by misuse, unauthorized dismantling, or natural hazards.
· The 18650 battery life varies according to the frequency of the triggers and the video resolution settings.
· The PIR motion sensor can only detect motions within a certain ranges and will not be activated by motions out of the range
Get Started
Download APP
1 Go to the App Store or Google Play to search and download “wansview” APP to your smart
phone or tablet.
2 Or scan below QR code to get the APP.
Power On Base Station
1 Connect the base station to a power source.
2 Please make sure the base station is in the
same room,close to the router,before
performing the setup.
Note:
The LED indicator on the base station will keep
blue when connected to the internet successfully.
Power the Camera
1 Please install two 18650 lithium batteries in
the camera before use.
2 Coming with micro USB connector on the
battery, the wifi camera can be charged by
universal 5V 2A phone adapter,Save your
money for new batteries continuously.(No
power adapter packed in).
PRESS
tips:In order to extend the working time of the
battery, please turn off the motion sensor when
using it outdoors.
Connect Base Station to Network
Connect your mobile phone with 2.4G WiFi. (5G is not supported for the camera)If you are using
a dual band router, make sure your 2.4G WiFi name is different from your 5G one.
1 Launch Wansview App,
Click
on Add Battery
Camera.
2 Select [Add Base Station
via WiFi method]
3 Click on [Start to sync
Base Station]
4 Long press [WiFi Pair Button]
on the Base station until you hear
[Please Sync the Base Station to
the Router], then Click on [Red
and Blue lights flash alternately].
10
5 Scan the QR code on the
back of the Base Station.
5 Name Base Station, then
click on [Next]
7 Your home WiFi will be
located, please input your
WiFi password correctly.
Click on [Connect to WiFi].
8 Base Station will try to
connect 2.4G, and you will
hear [Received WiFi
Information] from the Base
Station
9 Once the Base Station is
connected, you will hear
[Succeed to Connect Router
] and Add Base Station
Successfully.
11
Sync Battery Camera to Base Station
1 Click On [Start to pair
Battery Camera].
12
2 Ensure that the camera
is inserted workable
battery or plugged with
power supply, then click on
[Continue].
3 Long Press the [Sync Button] on Base Station until the blue light starts flashing and hear
[Entering Sync Mode].
Then long press the [Sync Button] on Battery Camera until the red&blue lights flash at the
same time. Click on [Finish] When you hear [Sync Succeed] and Base Station will be Online.
13
Click On the portrait of the Base Station, it will automatically jump to the page
list and display the current channel and power. Clicking in will display the current battery camera
online.
Low power
Charging
14
Tip: When the battery is low, it
may affect the use of your camera.
Please replace the battery or
power the camera.
Full screen view
16
Exit video
monitor
Screen capture
Mirror
Flip
Intercom
Video
Mirror flip
15
On the wall(Camera)
On a desktop or a shelf
Fasten the mounting screws into the wall and
attach the magnetic mount.
When you are mounting the camera to
drywall, be sure to use the plastic anchors.
18
17
On the wall(Base Station)
Common FAQ
1.When the APP prompts low battery, some functions may not start.
Reply:Please replace the battery or power the device in time.
2. When the base station cannot connect to the router
Reply: Is the base station too far away from the router, check if the
mobile APP is updated, and the password is correctly entered when
pairing, please check the wireless password.
3. The battery camera cannot be paired successfully with the base station.
Reply: Is it too far away, please close and reconnect
19
Manufacturer's Name: Shenzhen Smarteye Digital Electronics Co.,Ltd.
Sample Description: Battery Camera
Trade Mark: N/A
Model number: 801RTB, 802RTB, 803RTB, 804RTB, B1, B2, B3, B4
Operating Temperature: ‐10° C to 40° C
This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained
between the user’s body and the device, including the antenna. Use only the supplied or an approved antenna.
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites
have been carried out.
1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
2. The device complies with RF specifications when the device used at 20cm from your body
This product can be used across EU member states
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between
20cm the radiator your body: Use only the supplied antenna.
FCC ID: ZCB-801RTB
LET US KNOW
WHAT YOU THINK
Thank you so much for your order and trust to Wansview.Please feel free to contact us if you
have any questions about the product application.
As a young and growing company, it would mean the world to us if you could leave an
honest review about our product and services.
US/CA: service2@wansview.com
UK:service3@wansview.com
US/CA:service2@wansview.com
UK:service3@wansview.com
Facebook: www.facebook.com/WansviewClub/
Youtube: https://www.youtube.com/channel/UCPRXQcIkLsMAWQtpGxVx_jw
The instruction is for reference only. Slight differences may be found in the user interface.All
the designs and software here are subject to change without prior written notice.
For latest instructions, please go to www.wansview.com to download.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Create Date                     : 2018:09:07 17:11:17+09:00
Creator                         : Adobe Illustrator CC 2017 (Windows)
Creator Version                 : 21.0.0
Modify Date                     : 2018:09:18 17:41:00+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Title                           : B1快速安装指南
Metadata Date                   : 2018:09:18 17:41+08:00
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 196
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10099 bytes, use -b option to extract)
Instance ID                     : uuid:49c518c8-6e33-4652-a8d8-3b891acddbec
Document ID                     : xmp.did:60cd90d9-9e01-b540-af70-d0405366cef5
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:8e84244c-d911-44af-a4a7-44e1e5ffc820
Derived From Document ID        : xmp.did:0088bd01-bd50-8e48-8638-4b71a101ab4e
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:2c79f832-55c7-d544-9d87-14d6f2637a34, xmp.iid:60cd90d9-9e01-b540-af70-d0405366cef5
History When                    : 2018:08:13 17:46:34+08:00, 2018:09:07 17:11:03+08:00
History Software Agent          : Adobe Illustrator CC 2017 (Windows), Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 145.999906
Max Page Size H                 : 111.000826
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Arial-BoldItalicMT, Calibri, CompactaBT-Black
Font Family                     : Arial, Arial, Arial, Calibri, Compacta Blk BT
Font Face                       : Regular, Bold, Bold Italic, Regular, Black
Font Type                       : Open Type, Open Type, Open Type, Open Type, TrueType
Font Version                    : Version 5.06, Version 5.06, Version 2.90, Version 5.72, mfgpctt-v1.57 Thursday, February 18, 1993 2:13:59 pm (EST)
Font Composite                  : False, False, False, False, False
Font File Name                  : Arial_A.ttf, Arial Bold.ttf, arialbi_6.ttf, calibri_8.ttf, COMPCTAK.TTF
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Producer                        : Adobe PDF library 15.00
Page Count                      : 20

EXIF Metadata provided by EXIF.tools