Smart eye Digital Electronics HYIPC-545 IP Camera User Manual B Series goddess

Download:
Mirror Download [FCC.gov]
Document ID	1433167
Application ID	2WtwLTxfRgNI9GjjMatDAg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.07kB (1075855 bits)
Date Submitted	2011-03-17 00:00:00
Date Available	2011-03-17 00:00:00
Creation Date	2011-03-17 08:27:52
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2011-03-17 08:27:52
Document Title	Microsoft Word - B Series User Manual_goddess_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	CS

B Series——Goddess Model
IP Camera
2010-12
V4.16
User Manual
IP CAMERA User Manual
Index
INTRODUCTION ...........................................................................................................................4
FUNCTION AND FEATURES .....................................................................................................4
APPEARANCE AND INTERFACE.............................................................................................5
3.1
APPEARANCE ............................................................................................................................5
3.2
INTERFACE OF EQUIPMENT .......................................................................................................6
NETWORK CONNECTING .........................................................................................................7
4.1
CONNECTION INSTRUCTION ......................................................................................................7
4.2
VISIT INSTRUCTION ..................................................................................................................8
VISIT IP CAMERA FROM LAN ..................................................................................................8
5.1
SET IP ADDRESS .......................................................................................................................8
5.2
VISIT IP CAMERA ...................................................................................................................10
VISIT IP CAMERA FROM WAN ...............................................................................................12
6.1
PORT FORWARDING ................................................................................................................12
6.2
DDNS ....................................................................................................................................13
6.2.1
Manufacturer’s DDNS .......................................................................................................13
6.2.2
Third Party DDNS .............................................................................................................13
OTHER SETTINGS.....................................................................................................................14
7.1
NETWORK SETTING ................................................................................................................14
7.1.1
Basic Network Setting........................................................................................................14
7.1.2
WIFI Setting.......................................................................................................................14
7.1.3
ADSL Setting......................................................................................................................15
7.1.4
UPnP Setting .....................................................................................................................15
7.1.5
DDNS Setting.....................................................................................................................15
7.2
ALARM SETTINGS ...................................................................................................................15
7.2.1
Alarm Setting .....................................................................................................................15
7.2.2
Mail Service Setting ...........................................................................................................16
7.2.3
FTP Service Setting ...........................................................................................................17
7.2.4
Alarm Server......................................................................................................................18
7.3
ADVANCED .............................................................................................................................18
7.3.1
User Setting .......................................................................................................................18
7.3.2
Multi Device Setting ..........................................................................................................20
7.3.3
Other settings.....................................................................................................................20
7.4
MAINTAIN ...............................................................................................................................21
7.4.1
Device Information ............................................................................................................21
7.4.2
Time Setting .......................................................................................................................21
7.4.3
Firmware upgrade .............................................................................................................21
IP CAMERA User Manual
7.4.4
Restore Factory Default.....................................................................................................22
7.4.5
User browsing Log.............................................................................................................22
CENTRALIZATION CONTROL ................................................................................................22
TECHNICAL PARAMETERS ....................................................................................................23
10
FAQ ...........................................................................................................................................24
11
FCC STATEMENT ..................................................................................................................26
IP CAMERA User Manual
1 Introduction
The IP Camera combines a high quality digital video camera with network connectivity
and a powerful web server to bring clear video to your desktop from anywhere on your
local network or over the Internet.
Your IP Camera package should contain the following items, If any of the listed
items are missing, please contact your reseller from where you purchased the
camera for assistance.
The package includes:
 IP Camera * 1

IP Camera Utility CD *1

5V Power Adapter *1

Stand of plastic * 1

Cable * 1
If you select the device with wifi function, it has built-in wifi module and transmitting
antenna in package.
2 Function and Features

The video is compressed by MJPEG. There are VGA/QVGA/QQVGA three video
resolutions optional. User can change some parameters according to their demands
to satisfy his own visual prefer.

With built-in Microphone, it enables user to monitor the sound on the site. User can
also connect this equipment to the speaker, and it supports two-way intercom
function.

It was equipped with pan/tilt function, horizontally 270°and vertically 120°. Its outlook
IP CAMERA User Manual
is smart, easy and convenient to install in many sites.

Infrared LED for night vision covers 5m area, to realize 24 hours monitoring.

Support IR and color filter change automatically, no any color difference.

It adopts the TCP/IP network protocols and has inner web server. Users can browse
video through IE and other browsers. Data is transferred through one port; it is easy
for user to do the network setting.


Support 802.11b/g protocol, can build up wireless monitoring.
Motion detection and alarm pin can be connected to external sensors to detect
environmental situation.

Alarming record can be stored by email, FTP server. External alarm can be open
when detecting unusuality. It also sends alarm info to the alarm server.

Support three level of user authority.

Supports UPNP, port forwarding automatically on the router.

Support upgrading online.

Manufacture attached a label at the bottom of each IP Camera, it include Device ID,
DDNS. When IP Camera is connected to the internet, this URL can be used to visit
the device.

Manufacture provides free software, support Multi-view, Long time recording, video
replay etc.
3 Appearance and interface
3.1 Appearance
Figure 1
Note：
 Status Indicator: the green light is to show the status, when device running, Slow
flicker（one per 2 second），indicates the device is searching for network; flicker（one
or twice per second）, indicates the wired network connected; Frequent flicker（2~3
times per second）, indicates wireless network connected.
IP CAMERA User Manual
3.2 Interface of Equipment
Figure 2
1） Audio Output Socket: Audio output socket is for line-out audio player, such as
headphone, speaker, etc.
2） RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust. The
equipment can connect to all kinds of network equipments, such as hub, router,
switch, etc.
NOTE: Factory setting IP is 192.168.0.178, the http port is 80, the username is
admin, the password is 123456.
3） WIFI Antenna Hole: Install the WIFI antenna.
4） Alarm Output Socket: The alarm output socket is connected with a relay in the IP
camera. IP camera will control the switch to trigger the alarm bell or buzzer to alarm.
The relay is able to control the switch of a alarm whose voltage is no more than 36V,
and current is lower than 2A. Please refer to the Figure 3 for the connection of an
external alarm.
Output Pins
Switch
Alarm
Alarm power
Figure 3
5） Alarming Input Pin: Please refer to the schematic Diagram of Figure 4 for how
external detector collects alarm information.
The detector should be switched type (always on or always off). If the detector has
detected the smoke or people or animal to enter the area, the detector will switch on
or switch off. And it will send the external alarm signal into the IP camera.
IP CAMERA User Manual
PIR
Input
pins
Switch
PIR Power
Figure 4
6） Power Input Socket: Connect DC adaptor, its output should be 5V power
specification.
7） RESET Button: reset button is on the bottom of the device, Press the RESET button
and hold on more than 10 seconds, the equipment will restart and recover to the
factory default settings.
4 Network Connecting
Figure 5
4.1 Connection Instruction
Before visit the IP Camera, you should firstly connect it to the Network, supply the power
to it, and check if the light of RJ45 Socket is normal to make sure all of the
communication links are fluent. The connection method is like as Figure 5.
1) IP Camera-1 and IP Camera-2 are connected separately to 2 different LANs.
2) And these 2 LANs are already connected to the Internet. In order to get the LANs to
be connected to the Internet, they are required to be equipped with router and to
apply for the communication link from the local Internet Service Provider (ISP) and
IP CAMERA User Manual
connect to it by ADSL or optical fiber, etc.
3) PC-3 is connected to the Internet.
4.2 Visit Instruction
To visit the IP Camera, you should do some settings of IP Camera and Internet besides
getting the communication link fluency.
1) The PC and IP Camera are in the same LAN. If you want to use this PC to visit the
IP Camera, you need to make sure their IP address is at the same segment.
Otherwise you need to do the reset of the IP Camera’s IP address. For example, the
IP Camera-1’s IP address in Figure 5 is 192.168.1.139 (at the segment of 192.168.1),
while the PC-1’s IP address is 192.168.0.175 (at the segment of 192.168.0), then
you will be not able to visit the IP Camera through the PC-1. You need to change the
IP Camera-1’s IP address to 192.168.0.139 firstly.
2) The PC and IP Camera are in different LANs, but they are all connected to
Internet. For the IP Camera-1 and PC-2 in Figure 5, if you want to visit IP Camera-1
by PC-2, you should firstly do the setting as 1) to make sure that you can visit IP
Camera-1 through PC-1 and then do the setting of router-1 (do the port forwarding
from the router). The PC-2’s visit application could be sent through router-1 to IP
Camera-1. Normally, PC-2 could only send the information to router-1, if you don’t do
the setting of router-1, then PC-2 could not visit IP Camera-1.
5 Visit IP Camera from LAN
5.1 Set IP Address
The IP addresses of IP Camera and PC should be at the same segment, for Figure 5, the
IP Camera-1 can’t be visited. Run the BSearch_en.exe in the CD, click Search button,
and then select the IP Camera-1 to reset the IP address, as the Figure 6.
Setting Instruction:
 Please carefully check the “Local PC information” on the top left corner which lists
the PC configuration. If there are several network adapters in the PC, please select
the one you are using and make sure the IP address of IP Camera is as the same
segment of the PC.
 Change the content of “IP config” on the right to make sure the content is the same
as “Local PC information”. Only the last section of the IP address which needs
setting by yourself, you can set it as 139 just like Figure 6.
 If you don’t know how to fill out the content of “IP config”, you could also tick
the “Set IP automatically” to get the IP address from the router automatically.
 Put the user name and password into “Authentication” (By default, the user name
is: admin, password is: 123456). Click “Update”. The setting will take effect now.
Select the device in list box, click “Browse” button, it will open the Browser
IP CAMERA User Manual
automatically and pop up a window at the same time which requires to inputting the
user name and password. Then you see the home page of the IP Camera-1, click
“English” on the right-top corner, just as below Figure 7. On the right corner of the
interface, user can choose the language.
Figure 6
If you have the firewall software in your PC, when you run the
HSearch_en.exe, it may pop up a window to say if you want to block this
program or not, then you should choose not to block.
IP Camera by default use fixed IP address 192.168.0.178 and fixed http port
80. If you don’t have this software, you could also press down the reset button
to go back the factory setting. Then you could use this defaulted IP address to
visit the IP Camera.
IP CAMERA User Manual
Figure 7
5.2 Visit IP Camera
We suggest using IE kernel browser to view the video （it can provide more functions）,
but user need to install Player before viewing the video. Click “download and install
player (first use)” link, it will popup dialogue box as Figure 8, click Run, it will
automatically download player and install.
Figure 8
After install the plug-ins, click “Mode 1 to view” link in Figure 7 to view the video (video as
Figure 9).
10
IP CAMERA User Manual
Figure 9
1） Menu column
There are 2 kinds of menu, one is main menu, and the other is submenu. The main menu
lies at the top of the interface, including View, Network, Alarm, Maintain; Submenu lies
on the left of the interface, and different main menu is in line with different submenu.
2） Video Displaying Area
Video display area is according with resolution, the higher resolution, and the larger
display. Double click left mouse in the video display area, it will show full screen, and
double click again, it will go back to original size. Double click right mouse in the video
display area, it will show green icon, click the left mouse, Pan/tilt will remote according to
arrow signs.
3） Status Displaying Area
Right up corner is the status displaying area, to show the 9 device’s status:
 if not connected , button is gray
 if connected, button is green
 If wrong connected , button is yellow
 If alarm , button is red
4） Multi Channel displaying area
If user add multi channel（refer to 7.3.2）, when shift to 4-Ch, 9-CH, and will automatically
to show other device. On the showing area, if choose the image, you can do play, stop,
record, control Pan/tilt and other operation.
11
IP CAMERA User Manual
These buttons mean start video, stop, monitor, talk, record
and snapshot. Click button to choose the functions.
5） PTZ and video control
In Pan/Tilt control area, user can control the position according to the arrow sign: up,
down, left, right, middle, horizontal cruise, vertical cruise, and stop etc.
Means open IO output and Close IO output.
User can also set the device resolution, brightness, contrast and other parameters.
6 Visit IP Camera from WAN
6.1 Port forwarding
Follow the “Visit IP Camera from LAN” steps; make sure PC-1 can visit IP Camera-1. In
Figure 5, before the computers in WAN (PC-2, PC-3) can visit the IP Camera-1, must put
the IP Camera -1 into WAN. You can set port forwarding on Router-1 to put IP Camera-1
into WAN.
Open the Router Setting interface on PC-1. The interfaces for different routers are
different, and the port forwarding settings are different, please refer the router manual to
set. For most routers, “Virtual server” option can be found in setting interface. Fill the IP
address and port of IP Camera-1 into corresponding blank. Figure 10 is an example.
Figure 10
Select “status” option and remember the WAN IP address, enter the IP address in
browser of PC-1, if IP Camra-1 can be visited via PC-1, the port forwarding is success.
And PC-2 and PC-3 can also visit the IP Camera-1.
WAN IP address is allotted by ISP, please make sure it’s an available WAN IP
address. As WAN IP address is lack, many WAN IP address are available in
limited area. If PC-2 and PC-3 are not in this area, the IP Camera-1 won’t be
visited by them.
12
IP CAMERA User Manual
If user wants to put several IP Cameras into WAN, every device should set the
port forwarding. In order to distinguish these devices, every device should set
a different port. If the port of the device is not 80, should add the port to IP
address with colon to visit the IP Camera. Example: http://202.96.82.177:81.
6.2 DDNS
In Figure 5, Router-1 get WAN IP address via ADSL, these WAN IP address is always
changing, so, the IP address can’t be confirmed when visit the device in WAN. We need
the dynamic domain name server (DDNS). IP Camera-1 send IP configuration to DDNS
every few time, DDNS can recognize the WAN IP address of the router-1 which
connected with IP Camera-1. The WAN IP address can be searched on DDNS by
domain name. Herein, domain name substitute the dynamic IP address. If the device
can’t be visited by IP address, this domain name is also unavailable.
6.2.1 Manufacturer’s DDNS
Device manufacturer has established a DDNS, and allotted a dynamic domain name to
every device, the domain name has been integrated into devices when producing. For
example, enter domain name of Figure 11, the browser will connect the device and
display the IP address.
Figure 11
The domain name is realized by forward manner, the domain name will change
into the IP address and port number of the device when visit by domain name.
If the device can be visited by IP address but can’t be visited by manufacturer’s
domain name, please check the DNS info is available or not and make sure
the DNS setting is the same with the DNS setting of PC in LAN.
6.2.2 Third Party DDNS
User can also use third part DDNS, such as www.3322.org. User should apply a free
domain name from this website and fill the info into the below blanks (Figure 12) and
save the settings. Then the domain name can be used.
Figure 12
13
IP CAMERA User Manual
The third party domain name is realized by analysis manner, the domain name
will be displayed in the browser all the time when visit camera. If the port is not
80, the port number should be adding to the domain name with colon.
Example: http://robbicam2.3322.org:81
7 Other Settings
7.1 Network Setting
7.1.1 Basic Network Setting
The user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 13.
Figure 13
7.1.2 WIFI Setting
If the device is with WIFI, enter the Wireless LAN Setting, just as below Figure 14 shown,
click the “Search” button several times, it will show you the wireless network detected in
the Wireless Network List column. Select one of them and tick “Using Wireless Lan”,
then the relevant data of the selected wireless network will be shown in the following
blanks. Put in the password and click “Set”, then the WIFI setting is finished.
Figure 14
Note: When the device is connected both WIFI and wired, after it starts up, it will firstly
connect to the wired network, if it can’t connect to it, then it will change to connect the wifi.
14
IP CAMERA User Manual
The IP address and port is the same, either wireless or wired network.
7.1.3 ADSL Setting
User could enable the ADSL Dialup according to the below Figure 15 (The Telecom
Operators will assign the user name and password to you when you apply for ADSL
service.) Connect the device directly to the ADSL modem and it is connected to the
Internet, but don’t need to do the port forwarding.
Figure 15
7.1.4 UPnP Setting
UPNP stands for universal plug and play, if you start UPNP, once the IP camera is
connected into the LAN, it will communicate with the router in the LAN automatically. It
will request the router to open a port to forward its own port. It is no need for the users to
log in the router to set the port forwarding. Below Figure 16, tick “Using UpnP to Map
Port” and the setting are completed. You could check the UpnP succeeds or not in the
interface of System Maintenance.
Figure 16
Before using UPNP function, please make sure the router’s UPNP function has been
triggered. Because there are so many different routers, and not all of them can support
UPNP. Please test if the router work well with the equipment, if not, we would suggest
you don’t enable this function.
7.1.5 DDNS Setting
Please refer to the content in 6.2.
7.2 Alarm Settings
7.2.1 Alarm Setting
1） Alarm Detect
User can select the motion detect to enable monitor a certain area, if anything happens
in that area, it will trigger the alarm. In the motion detect sensibility, the smaller the figure,
the more sensitive it is.
As showed in picture 4, if external alarm detector was connected to the device, user will
be able to tick the scheduler for alarm. If the external alarm detector is an always on
switch alarm. Please choose “open”. If the external alarm detector is always off switch
15
IP CAMERA User Manual
alarm, please choose “close”.
2） Alarm Action
After every trigger of alarm during the scheduled time, the device can trigger alarm in
several ways.
 IO interface for alarm signal output: when relay was switched on (please refer to
Picture 3), the external alarm will begin to alarm.
 Send alarm info by email.
 Send the site pictures to the FTP server, user can also set the break time between
two pictures.
 Send alarm info to the alarm server.
3） Scheduler
Device will trigger alarm in scheduled time. User can set schedule time to be “all the
time”. Please set the system time, time zone, and select the scheduled time. Please refer
to the Picture 17.
Figure 17
7.2.2 Mail Service Setting
The device will send alarm email to the email address was filled in. Please do the mail
settings properly fist, Picture 18 is a mail setting page for your reference. After the setting,
please click save and test to check if it works properly.
If have already set the mail server properly, user can tick to enable “Report Internet IP by
mail”. After every restart, the device will send its Internet IP address to user’s email
16
IP CAMERA User Manual
address. If this device has been port mapping to the Internet, then users can view the
device’s video through the Internet IP address.
Figure 18
Before setting these parameters, please refer the settings of Outlook Express.
7.2.3 FTP Service Setting
Figure 19
When alarming, device will snap and send the image to FTP server, please make sure
the FTP setting is correct. Above Figure 19 of FTP setting for your reference, click setting
to store the setting info and click test to check the setting.
After correct setting FTP server, you can use “upload Image Periodically” function. Even
17
IP CAMERA User Manual
no alarm, device can also send the snap image to FTP periodically.
In order to use FTP function, user should apply username and password on
the FTP server first. And please apply some storage, and the authority to write
and create sub-category into it.
7.2.4 Alarm Server
Figure 20
Please confirm if you have connected to alarm server. The alarm message format as
follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&
io=0
Alarm server need develop by customer , user can extend other functions on this server ,
like SMS , MMS alarm , and mobile phone etc .
7.3 Advanced
7.3.1 User Setting
There are three levels of authority; they are Administrator/Operator/Visitor. Administrator
have the highest authority, it can do any change to the settings. Operator account only
can operate the IP camera, can’t do changes to the settings, and please refers to Figure
22. Visitor account only can watch the video, can’t do any operation to the IP camera,
and please refers to Figure 23. By default, the administrator’s user name is admin,
password: 123456.
Figure 21
18
IP CAMERA User Manual
Figure 22
Figure 23
19
IP CAMERA User Manual
7.3.2 Multi Device Setting
Figure 24
As Figure 24, User can maximum add 9 devices to view the device simultaneously. Click
refresh button to check the device in the LAN. When click the device, will popup setting
dialogue box and input the device info, as figure 25 and click save. After that, must click
submit button to save.
Figure 25
7.3.3 Other settings
You can choose open or close indicator LED. If set PTZ center on start ‘Yes’, when start
device, Pan/Tilt will move to center and then stop. You can also set the Horizon patrol
rounds and vertical patrol rounds, when you click patrol on the ‘view’ interface, it will
round according to your setting rounds. You can also set PTZ rate, 0 means fasterst.
20
IP CAMERA User Manual
Figure 26
7.4 Maintain
7.4.1 Device Information
Figure 27
7.4.2 Time Setting
If the device is connected to the Internet, you enable the NTP server to correct the time
and select the right time zone. Or you should use the PC’s time to correct its time.
Figure 28
7.4.3 Firmware upgrade
The device runs 2 kinds of programmer, one is system firmware, the other is application
firmware. They could be upgraded separately.
21
IP CAMERA User Manual
Figure 29
7.4.4 Restore Factory Default
Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to
restore the factory default. After confirmation, the system will restore the factory default
and reboot.
7.4.5 User browsing Log
After enter the log interface, you could view who and when the device is visited.
Figure 30
Centralization Control
Figure 31
IPCMonitor is a free software offered by factory, several devices on LAN and WAN can
22
IP CAMERA User Manual
be browsed at the same time. The software also supports snap, video record, alarm and
so on. The below Figure 31 is the interface.
For more information, pls. refer to the <> in CD.
9 Technical Parameters
Item
Image
Capture
Pan/Tilt
Assistant
Video and
Audio
Network
Other
Features
Hardware
Interface
Sub Item
Description
Sensor
CMOS sensor
Total of pixel
300k
Minimum
illumination
IR on，0 Lux
Lens
f=4.5mm, F=2.0, Fixed Iris
IR_CUT
Support IR and color filter change automatically
Pan Coverage
340°
Tilt Coverage
100°
Lighting Control
8pcs 850nm Infrared LEDs, 5m distance
Lighting
Auto control
Resolution
640*480(VGA)/320*240(QVGA)/160*120(QQVGA)
Compression
MJPEG
Frame rate
30fps
Bit rate
128kbps ~ 5Mbps
Image Rotation
Mirror /Up-side down
OSD
support
Audio Compression
ADPCM
Basic Protocol
TCP/IP、UDP/IP、HTTP、SMTP、FTP、DHCP、
DDNS、UPNP、NTP、PPPOE
Other Protocol
802.11b/g
Video control
support
Dual way audio
support
Motion Detection
support
Triggered Actions
Email/FTP/external alarm/send message to alarm
server
User Setting
Three levels
Date/ Time Setting
support
Upgrade
Upgrade from network
DDNS
A free DDNS provided by manufacturer
Ethernet
10Base-T/100base-TX
Alarm In
1 way
Alarm Out
1 way
Audio In
Internal mic
23
IP CAMERA User Manual
Physical
Index
Software(PC
Side)
Audio Out
Audio Line-out interface x 1
Weight
298g
Main body
108mm(L)*109mm(W)*131mm(H)
Power
DC 5V
Power consumption
<6W
Operating
temperature
-20℃~ 45℃
Operating
temperature
10% ~ 80% non-condensing
OS Supported
Microsoft Windows 98/2000/XP/Vista etc.
Browser
Internet Explorer6.0 and Above or Compatible
Browser, Firefox, Safari etc.
Application
Software
IPCMonitor.exe
10 FAQ
1)
Unmatched power adapter will damage the equipment or power adapter
When plug in the power adapter , please check carefully the voltage , it should be 5V
adapter for this equipment.
2)
Slowly browse speed
This equipment adopts MJEPG compression format, it needs large network bandwidth,
the narrow bandwidth will affect the browse speed . The typical bandwidth uses situation
as below:
640x480@10fps : 4.0 Megabits ～ 5.0 Megabits
320x240@30fps : 1.2 Megabits ～ 1.6 Megabits
3)
Can’t find equipment via search software after connect to LAN
Make sure the equipment and PC is in the same LAN; if install firewall software, please
close it and try again.
4)
Can find equipment via search software, but can’t visit
If the IP address of IP camera and PC is not in the same Network Segment, you should
change them on the same Network Segment before visit. Network Segment is the first
three number of IP address. If the IP address of PC is 192.168.0.100, so it can only visit
the equipment which IP address is between 192.168.0.1~192.168.0.255.
5)
Can’t visit the equipment via Internet
Please refer to:
Chapter 4 (Figure 3) to check if the internet connection is correct;
24
IP CAMERA User Manual
Chapter 5 to check if you can visit via LAN;
Chapter 6 to check if the port forwarding is correct; and check the route setting if it forbid
this equipment sending data to internet.
6)
Can visit via public IP address, but can’t visit via manufacturer’s domain name
Make sure the DNS setting is same as your PC , as below Figure 32 , in the search tool ,
the DNS 1 and DNS 2 on both side should be same.
Figure 32
7)
About Cell phone View
User can use the cell phone which use PUSH to view the device, like Safari on IPHONE,
visit format as below: http://ip address: port/mobile.html
25
IP CAMERA User Manual
11 FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body
26

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : CS
Create Date                     : 2011:03:17 08:27:52+08:00
Modify Date                     : 2011:03:17 08:27:52+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - B Series User Manual_goddess_.doc
Creator                         : CS
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Document ID                     : uuid:4c58d8c0-d2e2-4149-9da2-cbf3d902ae4d
Instance ID                     : uuid:a22e9be2-6041-428c-83ff-aeb82c5bc964
Page Count                      : 26

EXIF Metadata provided by EXIF.tools