SmartDisplayer Technology BT1CM2 BLE CARD User Manual

SmartDisplayer Technology BLE CARD

User Manual

Model:BT‐1‐X‐XX(X=0~9,A~ZorBlank)OnefillcardoperatinginstructionsIntroductionOnefillisacreditcardissuedbyanissuingbankandsupportsallstandardoperationsanyothercreditcardperforms.Thisis,userscanutilizethiscardtoperformtransactionsoff‐lineatanystoreormerchantutilizingthemag‐stripeortheEMVchip,itcanalsobeusedtoextractmoneyfromaphysicalATMorconsultbalances,etc.TheuniquefunctionalityoftheOnefillcardcentersinthepossibilityofconnectingitwithanapplicationintheusersmobilephoneortablet.Withthisinmindthereare2basicfunctionsthattheuserwillneedtounderstandforcorrectutilizationoftheOnefillcard.Thesefunctionsare:enrollmentandcardonlinepurchases,whichwillbedescribedinmoredetailinthenextsectionsofthisusermanual.EnrollmentThe Issuing bank running the Onefill program will mail the Onefill card to the user along with a welcome letter that will contain an activation code. Once the user receives the Onefill card and downloads the Onefill application into his mobile phone, the user will need to press the on/off button in the card to turn it on. The card’s small LED in the back will blink once. Now is the time when the user needs to launch the application for the first time. The application will ask the user to tap the card. At this point the user will need to tap the card close to the phone. Once that operation is successful, the user will need to enter the activation code contained in the welcome letter received from the issuing bank.
Model:BT‐1‐X‐XX(X=0~9,A~ZorBlank)The application will message the user via the app when the user has been fully enrolled to the Onefill Service. OnlinepurchasesOncetheuserisgettingreadytocheckoutonanapprovedmerchantsitesupportedbytheOnefillservice,theapplicationwillprompttheusertotaptheOnefillcardclosetothemobiledevicerunningtheapplication.ThiswilltriggertheOnefillauto‐fillfunctionswithintheapplication.FCCID:2ADPT‐BT1CM2FCCStatement:FederalCommunicationCommissionInterferenceStatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 

Navigation menu