SmartDrive Systems SR4KF Bluetooth Low Energy (BLE) KeyFob User Manual 9 User Guidex

Download:
Mirror Download [FCC.gov]
Document ID	3829678
Application ID	5NW2UVBqQv9KFQ65bOpdUw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	125.11kB (1563899 bits)
Date Submitted	2018-04-25 00:00:00
Date Available	2018-04-25 00:00:00
Creation Date	2018-01-16 11:15:32
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-01-16 11:15:32
Document Title	Microsoft Word - 9. User Guide.docx
Document Author:	bertq

KeyFob
User Manual
Model: KeyFob
Date: January 16, 2018
SmartDrive Systems Incorporated
4790 Eastgate Mall
San Diego, CA 92121
Copyright © 2018 SmartDrive Systems Incorporated.
All Rights Reserved.
SMARTDRIVE
PAGE 1 OF 7
TABLE OF CONTENTS
Revision History...................................................................................................................................... 3
Terms & Abbreviations........................................................................................................................... 3
Scope...................................................................................................................................................... 4
Description ............................................................................................................................................. 4
Operation ............................................................................................................................................... 4
Battery ................................................................................................................................................... 5
Label Information ................................................................................................................................... 6
Warnings & Statements ......................................................................................................................... 6
Manufacturer’s & Importer’s Information ............................................................................................. 7
SMARTDRIVE
PAGE 2 OF 7
1 REVISION HISTORY
Date
1/10/2018
1/15/2018
1/16/2018
Revision
Revisions
Initial Draft
Issued Version
Revised Version
Made By
B. Vlaanderen
B. Vlaanderen
B. Vlaanderen
2 TERMS & ABBREVIATIONS
Term
KeyFob
Bluetooth
IC
LED
Directive 2014/53/EC
SMARTDRIVE
Description
Wireless Pocket-sized Hand-held Remote Controller
RF Communication protocol standard that on the 2.4GHz ISM band
Integrated Circuit
Light Emitting Diode
Radio Equipment Directive of the European Community
PAGE 3 OF 7
3 SCOPE
This document describes how use SmartDrive’s Bluetooth “KeyFob”.
This document is to be used by personnel that are assigned by SmartDrive to train SR4 System users on
how to use the KeyFob.
4 DESCRIPTION
The KeyFob is a Wireless Remote Controller for use with SmartDrive’s Video Event Recorder Model SR4.
It uses 2.4GHz Bluetooth for communication and has a range of about 12m in free air.
It uses a single PCBA containing a CSR Bluetooth IC, a replaceable 20mm diameter CR2032 primary
Lithium cell, a momentary push-button, an indicator LED and an embedded 2.4GHz micro-stripline
antenna.
5 OPERATION
The KeyFob is operated by first sliding open its protective cover, as can be seen from the below pictures,
and then momentarily pressing its button.
The KeyFob’s LED Indicator will light up briefly while it is transmitting.
If the LED Indictor does not light up or if it is very dim, this is an indication that the KeyFob’s battery is
depleted or nearly depleted and needs to be replaced.
If the KeyFob is within range of an SR4 Video Event Recorder System mounted in a vehicle, pressing the
KeyFob’s button will generate a “Manual Event” in the SR4 Video Event Recorder System. This means that
Video, Audio, GPS and Vehicle information of 20s before and 20s after the event will be moved to its
internal Flash memory and can be reviewed by SmartDrive’s review center.
SMARTDRIVE
PAGE 4 OF 7
6 BATTERY
The KeyFob contains a replaceable 20mm diameter CR2032 primary Lithium cell battery.
If the LED Indicator on the KeyFob is dim or off when pressing the KeyFob button, this is an indication that
its battery is depleted and needs to be replaced.
The procedure to replace the battery is as following:
1. Place the KeyFob closed and face-down on a flat surface.
2. Using a small “Philips-head” screwdriver, loosen its 3 screws in the back.
3. Lift up the back enclosure with loose screws and place it next to the KeyFob, as shown below.
4. Remove the KeyFob’s PCBA.
5. Turn around the PCBA and push the coin-cell battery out of its holder using the small screwdriver.
6. Insert a fresh CR2032 battery into its PCBA, taking care that the + mark on the battery faces
upwards.
WARNING: For maximum KeyFob battery life, use only brand-name batteries, such as Panasonic,
Duracell, Varta & Energizer.
7. Turn around the PCB and place it back in its place in the KeyFob enclosure.
8. Place the back enclosure back in place and tighten its 3 screws.
SMARTDRIVE
PAGE 5 OF 7
7 LABEL INFORMATION
Label Design
Label Location
8 WARNINGS & STATEMENTS
The intended environmental conditions of the KeyFob: are from -30C to 80C ambient.
This device complies with FCC Part 15 and Industry Canada license exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Hereby, SmartDrive Systems, declares that this KeyFob is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EC.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Les changements ou modifications non expressément approuvés par la partie responsable de la
conformité pourraient annuler l'autorité de l'utilisateur à utiliser cet équipement.
Par la présente SmartDrive Systems déclare que l'appareil KeyFob est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la directive 2014/53/CE.
SMARTDRIVE
PAGE 6 OF 7
9 MANUFACTURER’S & IMPORTER’S INFORMATION
The name & address of the Manufacturer of the KeyFoB is as following:
SmartDrive Systems, Inc. (Shenzhen)
4/F, Bldg No.5, Anhua Industrial Zone,
No.18 Tairan 8th Road, Chegongmiao, Futian,
Shenzhen, China 518040, P.R.C.
The name & address of the Importer of the KeyFoB is as following:
SmartDrive Systems Inc.
4790 Eastgate Mall
San Diego, CA 92121, USA
SMARTDRIVE
PAGE 7 OF 7

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (88 0 obj) not found at 1561841

EXIF Metadata provided by EXIF.tools