SmartRG SR900 802.11ac Gigabit Router User Manual SR400ac Gateway Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	4036267
Application ID	Ue4dORiBoNJrzBN5l0hA6A==
Document Description	User manual SR905ac
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	142.7kB (1783748 bits)
Date Submitted	2018-10-16 00:00:00
Date Available	2018-10-17 00:00:00
Creation Date	2018-10-04 13:42:43
Producing Software	madbuild
Document Lastmod	2018-10-04 13:42:43
Document Title	SR400ac Gateway Quick Start Guide
Document Author:	SmartRG Inc.

Lorem ipsum
ipsum
Quick Start Guide
SR905ac
This Quick Start Guide shows you how to set up and start using your new gateway.
Installation
1. Connect one end of an Ethernet cable to the WAN port on the gateway and connect the other end of the cable
to the wall jack installed by your provider.
2. Connect a LAN port on the gateway to your PC using an Ethernet cable.
3. Plug the power adapter to the wall outlet and then connect the other end of it to the Power port of the
gateway.
4. Turn on the unit by pressing the Power button on the side of the gateway.
Your gateway is now automatically being set up to connect to the Internet. This process may take a few minutes to
complete.
If you are unable to connect to the Internet, make sure that all cable connections are in place and the gateway’s
power is turned on.
3
LED Indicators
The LEDs on the top of the SR905ac can assist you
in better understanding the current state of your gateway.
Legend:
LED
White
Action
White blinking
Green
Green blinking
Explanation
Power
Device in CFE mode
Device powered on and ready for use
Internet
Gateway online
Data being transferred
Internet authentication / connection has failed
1-4
LAN Ethernet connected (at 1000 BASE-T)
Data being transferred (at 1000 BASE-T)
Red
LED
WAN
Action
Explanation
Device online (at 1000 BASE-T)
Device online (at 10/100 BASE-T)
Network activity
WAN Ethernet connected (at 1000 BASE-T)
Data being transferred (at 1000 BASE-T)
WAN Ethernet connected (at 10/100BASE-T)
Data being transferred (at 10/100BASE-T)
2.4 GHZ
5 GHZ
WiFi enabled
Data being transferred
Locked WiFi
(WPS)
WPS enabled
Data being transferred
SS USB 1 & 2
USB device connected
Data being transferred
Quick Gateway Configuration
Logging in to your gateway
To change the settings on your gateway, you must log into the gateway's interface. Make sure that you have completed
the steps in "Installation" before you begin.
1. Open your Internet browser and type 192.168.1.1 into the address line. The Login dialog box appears.
2. Enter the credentials shown below and click LOGIN. Your service provider may use other settings. If so, contact
your provider for details.
User Name: admin
Password: admin
Configuring the WAN manually
If the automatic connect process is unsuccessful, refer to the "WAN Configuration" section of the SmartRG SR905ac
Gateway User Manual to manually establish a connection.
Wi-Fi Setup
1. In the left menu, click WiFi > Networks > Status. The following page appears, showing information for the
primary network. The dual-band option is enabled by default.
2. Accept the default ID shown in the SSID field or enter the SSID for the network that you want to configure. You
will need this ID for Step 8.
3. Choose a passphrase and type it in to the Password field. You will need this passphrase for Step 8.
4. Select the desired Encryption. Make sure that the host devices you intend to use support the selected
authentication type. The default encryption method works for most environments.
5. If you do not want this SSID visible to other users, click the white circle next to Broadcast SSID to disable it.
6. Click APPLY.
7. To enable a guest wi-fi network:
a. Click the GUEST tab.
b. Click the white circle next to Enabled.
c. Fill in the fields following the instructions in Steps 2-6.
d. Click APPLY.
8. Follow the WiFi connection instructions provided with your client device to connect to the gateway. Use
the SSID name you selected in Step 2. Then enter the passphrase that you created in Step 3 in the
appropriate location on the network setup screen of your WiFi client device.
Optional Wall Mount
Using a Phillips-head screwdriver, remove the mount
from the bottom of the gateway.
Gateway
Front
Insert the mount into the back of the gateway and
tighten the screw located in the bottom of the mount.
Using the template below, attach the two included
screws to the wall. Using wall anchors is
recommended.
1/16” (2-3mm)
Wall Anchor
4 1/8” (104mm)
Slide the mount down on to the screws.
Record Your SR905ac Wi-Fi Settings
Predefined wireless settings
If you change the preset wireless
settings
Primary WiFi network name (SSID)
Primary Network key (password)
Guest WiFi network name (SSID)
Guest Network key (password)
Additional Support
If you require further instructions, please contact your local ISP Support.
SmartRG Inc. All Rights Reserved. © 2018
11
Appendix: Compliance Statements
FCC - Part 68
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom case
of this equipment is a label that contains, among other information, a product identifier in the format US:
VW7DL01BSR555AVW7DL01BSR655A. This indicates a REN (Ringer Equivalency Value) of 0.18.
This equipment uses the following USOC jacks: RJ-11/RJ45/USB/Power Jacks.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
Ringer Equivalency Number Statement
REN=0.18
The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a
telephone interface. The termination of an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés
à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de
dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas
5.
Notice: The Ringer Equivalency Number (REN) assigned to each terminal device provides an indication of the
maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface
may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
Numbers of all the devices does not exceed 5.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if
you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect
the operation of the equipment. If this happens the telephone company will provide advance notice in order for
you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact SmartRG,Inc. If
the equipment is causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public
service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this
device does not disable your alarm equipment. If you have questions about what will disable alarm equipment,
consult your telephone company or a qualified installer.
13
IC CS-03 statement
This product meets the applicable Industry Canada technical specifications.
Le présent matériel est conforme aux specifications techniques applicables d’Industrie Canada.
The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a
telephone interface. The termination of an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five. / L’indice d’équivalence de la sonnerie (IES)
sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une interface téléphonique. La
terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la
somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède pas cinq.
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. End-users and installers must be provide with antenna installation instructions and
consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
15
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et la conformité à
l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and
your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou émetteur.
Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved
by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than
the maximum gain indicated for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait
partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne
énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les
types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement
interdits pour l'exploitation de l'émetteur.
EMC Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
5GHz
5150-5250 MHz band is restricted to indoor operations only.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 17
Page Mode                       : UseOutlines
Language                        : en-US
Producer                        : madbuild
Create Date                     : 2018:10:04 13:42:43-04:00
Modify Date                     : 2018:10:04 13:42:43-04:00
Title                           :  SR400ac Gateway Quick Start Guide
Author                          : SmartRG Inc.
Subject                         : 

EXIF Metadata provided by EXIF.tools