SmartThings STH-ETH011 The SmartThings Hub is a ZigBee/Z-Wave home automation gateway User Manual FCC Part 15

Download:
Mirror Download [FCC.gov]
Document ID	2466856
Application ID	3RzTtqumWsi6e0WJJsLfIw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	133.24kB (1665546 bits)
Date Submitted	2014-12-08 00:00:00
Date Available	2014-12-08 00:00:00
Creation Date	2014-12-04 14:59:06
Producing Software	Microsoft® Word 2010
Document Lastmod	2014-12-04 15:00:19
Document Title	FCC Part 15
Document Creator	Microsoft® Word 2010
Document Author:	Rick McMurray

Rhein Tech Laboratories, Inc.
360 Herndon Parkway
Suite 1400
Herndon, VA 20170
http://www.rheintech.com
Appendix K:
Client: SmartThings, Inc.
Model #: PGC422-C
IDs: R3Y-STH-ETH011/10734A-STHETH011
Standard: FCC 15.247/IC RSS-210
Report #: 2014175
Manual
Please refer to the following pages.
Page 46 of 58
these instructions and review the “Let’s Get Started” card that
came with your SmartThings Hub.
Go to www.smartthings.com/start
Download the SmartThings Mobile
app for your mobile device
Follow the on-screen instructions
Have questions or need help? Chat with us live in the
SmartThings Mobile app, go to support.smartthings.com to
The SmartThings Hub wirelessly connects all of your different sensors so that you
can receive messages about what is going on and use your smartphone to remotely
control different things in your home or office. Here's how:
It's Open
The SmartThings Hub speaks many different languages. In addition to sending
commands between the many SmartThings devices, the Hub can also
communicate with ZigBee, Z-Wave, IP, and other wireless protocols.
The SmartThings Hub works best if installed in a central location to where your
SmartThings will be connected. The recommended separation distance from the
user for this equipment is 7.6 inches (20 cm).
A. Power Port
Power port to be used with included power adapter and cable.
B. Ethernet Jack
Avoid installing the SmartThings Hub near or inside sources of metal,
radio or electromagnetic interference.
Provides connectivity to the Internet using the included Ethernet cable.
Vermeiden Sie die Installation des SmartThings Hubs in oder in der
Nähe von Metall, Funkantennen oder anderen elektromagnetischen Störsendern
C. Status Light
Éviter l'installation du Hub SmartThings a à proximité ou a à l’intérieur d’objets
métalliques ou de sources d’interférences radioélectriques ou électromagnétiques.
Lights to indicate the Hub’s status.
Please follow the instructions provided in the SmartThings Mobile App when
installing your SmartThings Hub, or go to support.smartthings.com if you have any
questions.
It Connects to the Internet
Plug the enclosed Ethernet cable into the Hub, and then connect it to your Internet
router. This creates a secure connection between the Internet and the SmartThings
Cloud.
WARNING: No user-serviceable parts inside. Refer all servicing to
qualified service personnel.
Warnung: Keine Wartung einzelner Teile durch den Nutzer. Wenden Sie sich nur
an qualifiziertes Servicepersonal für Wartungen
It Communicates Information and Commands
When one of your connected SmartThings or compatible sensors has a message to
relay (for instance, if motion is detected or if a door opens), the SmartThings Hub
will receive that message from the sensor and send it to your phone. It also allows
you to send commands back to these devices, and lets the sensors talk to each
other (for instance, telling a light to turn on if motion is detected).
search our knowledge base, or email us at
support@smartthings.com.
Installation
The good news is that your SmartThings Hub does all the heavy lifting for
you, and it’s pretty simple. No buttons to worry about.
Hi!
Attention: l’équipement SmartThings ne doit être en aucun cas ouvert par l’utilisateur
luimême. Pour l’entretien et/ou la maintenance, contacter le personnel qualifié.
Three Critical Steps to Install
Welcome Code
There is an important code on the “Let’s Get Started” card that came in the box
with your SmartThings Hub. You’ll need your code for registration, and it looks like
the sample below.
Connect your SmartThings Hub to your Internet router using the
included Ethernet cable.
You can find your Welcome Code on the “Let’s Get Started”
Card in your SmartThings Hub.
Connect your SmartThings Hub to power using the provided
power supply.
Register your SmartThings Hub to your account using our mobile app.
ABC123
PL
hand? If this is your first time with SmartThings, please follow
Getting Around
Are you ready to have a safer, smarter home in the palm of your
Meet Your
SmartThings™ Hub
ëABCDEFJî
SA
Welcome
Lost your Welcome Code? Contact support@smartthings.com and we’ll
recover it for you.
Once you’re up and running, adding SmartThings to your world is easy. Enjoy!
Important Safety Instructions
Certifications
• Read, keep and follow
these instructions.
• Heed all warnings.
• Do not use this product near water or
expose the product to dripping or
splashing of any water or liquid.
• Clean only with a dry cloth.
• Do not install near any heat sources
such as radiators, heat registers, stoves
or other apparatus (including amplifiers)
that produce heat.
Certified under FCC Part 15.
• Only use attachments and accessories
specified by the manufacturer.
• Read our Product Usage
Guidelines at:
http://SmartThings.com/guidelines
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
SmartThings Hub FCC ID: R3Y-STH-ETH011, M/N: PGC422-C
Contains FCC ID: D87-ZM5304-U, M/N: ZM5304AU
Wichtige Sicherheitshinweise
• Lesen, behalten und folgen
Sie diesen Anweisungen.
• Beachten Sie alle Warnhinweise.
• Verwenden Sie das Produkt nicht in der
Nähe von Wasser und vermeiden Sie
Tropfen oder Spritzer von Flüssigkeiten
jeder Art.
• Säubern Sie das Gerät ausschliesslich
mit einem trockenen Tuch
Certified in Canada by IC to RSS-210.
• Vermeiden Sie die Installation in der
Nähe von Wärmequellen wie Heizungen,
Öfen oder anderen Geräten (inkl.
Verstärkern), die Hitze produzieren.
• Verwenden Sie nur Hersteller
zertifiziertes Zubehör.
Règles de sécurité:
• Lire, conserver et suivre ces instructions. • Ne pas installer a proximité d'une source
de chaleur telle que radiateur, poêle ou
• Respecter toutes les consignes de
autres appareils (incluant les
sécurité.
amplificateurs) qui produisent
• Nettoyer l'appareil uniquement avec un
de la chaleur.
chiffon sec.
• Utiliser uniquement des accessoires
• Ne pas utiliser à proximité et éviter tout
recommandées par le fabricant.
contact avec l’eau ou un quelconque
liquide.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
CE version contains M/N: ZICM357SP0-1.
• Reorient or relocate the receiving antenna.
FCC Statement
• Increase the separation between equipment and the receiver.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
Tested to Comply With FCC Standards
FOR HOME OR OFFICE USE
N136
Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Information to the User
Changes or modifications not expressly approved by SmartThings, Inc. could
void your authority to operate the equipment.
• Consult the dealer or an experienced radio/TV technician for help.
One (1) Year Limited Warranty
SmartThings Inc. warrants this product (the “Product”) against defects in
materials and/or workmanship under normal use for a period of ONE (1) YEAR
from the date of purchase by the original purchaser (“Warranty Period”). If a
defect arises and a valid claim is received within the Warranty Period, then as
your sole remedy (and SmartThings‘ sole liability), SmartThings will at its
option either 1) repair the defect at no charge, using new or refurbished
replacement parts, or 2) replace the Product with a new product that is
functionally equivalent to the original, in each case within 30 days following
receipt of the returned Product. A replacement product or part assumes the
remaining warranty of the original Product. When a Product or part is
exchanged, any replacement item becomes your property and the replaced
Product or part becomes SmartThings’ property.
Obtaining Service: To obtain warranty service, visit support.smartthings.com
to speak with a service agent or open a service request. Please be prepared to
describe the Product that needs service and the nature of the problem. A
purchase receipt is required. The Product must be insured, and shipped
freight prepaid and securely packaged. You must contact support for a Return
Material Authorization Number (“RMA Number”) before shipping any Product,
and include the RMA Number, a copy of your purchase receipt and a
description of the problem you are experiencing with the Product. Any claim
under this Limited Warranty must be submitted to SmartThings before the end
of the Warranty Period.
Exclusions: This warranty does not apply to: a) damage caused by failure to
follow instructions relating to the Product’s use or the installation of
components; b) damage caused by accident, abuse, misuse, transport,
neglect, fire, floods, earthquake or other external causes; c) damage caused
by service performed by anyone who is not an authorized representative of
SmartThings; d) accessories used in conjunction with a covered Product; e) a
Product or part that has been modified to alter functionality or capability; f)
items intended to be periodically replaced by the purchaser during the normal
life of the Product, including, without limitation, batteries, bulbs or cables; g) a
Product that is used commercially or for a commercial purpose, in each case
as determined by SmartThings.
EXCEPT FOR BODILY INJURY, SMARTTHINGS SHALL NOT BE LIABLE FOR
(I) ANY LOST PROFITS, COST OF PROCUREMENT OF SUBSTITUTE
PRODUCTS, OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR (II)
ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE FOR THE PRODUCT,
IN EACH CASE WHETHER RESULTING FROM THE USE OF OR INABILITY TO
USE THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY TO YOU.
TO THE EXTENT PERMITTED BY APPLICABLE LAW, SMARTTHINGS
DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST
HIDDEN OR LATENT DEFECTS. IF SMARTTHINGS CANNOT LAWFULLY
DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT
PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN
DURATION TO THE WARRANTY PERIOD. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights and you may also have other
rights, which vary from state to state. To exercise your rights under this
warranty, please follow the instructions above under the heading “Obtaining
Service”, or contact SmartThings at SmartThings, Inc., 1000 Potomac St NW
#120, Washington, DC 20007.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : Rick McMurray
Create Date                     : 2014:12:04 14:59:06-07:00
Modify Date                     : 2014:12:04 15:00:19-07:00
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:12:04 15:00:19-07:00
Creator Tool                    : Microsoft® Word 2010
Format                          : application/pdf
Title                           : FCC Part 15
Creator                         : Rick McMurray
Document ID                     : uuid:3e52597d-a6d1-4299-88e5-0bf440ebca22
Instance ID                     : uuid:945fe4d0-4251-4ab8-b860-e9e604b17f38
Producer                        : Microsoft® Word 2010
Page Count                      : 3
For                             : watwood,
Bounding Box                    : -18 -1067 1236 124
Container Version               : 9
Creator Version                 : 18

EXIF Metadata provided by EXIF.tools