Smartware USN3D201 Smartcard Reader User Manual USN3se MX3se 3I3P
Smartware Smartcard Reader USN3se MX3se 3I3P
Contents
- 1. User Manual.pdf
- 2. User manual USN1se_USN2se_USN3se.pdf
- 3. User manual USN3se_MX3se-3I3P.pdf
User manual USN3se_MX3se-3I3P.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3260124 |
| Application ID | TiBxrlOAvGAuw35/sF9uAw== |
| Document Description | User manual USN3se_MX3se-3I3P.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 38.57kB (482075 bits) |
| Date Submitted | 2017-01-16 00:00:00 |
| Date Available | 2017-01-16 00:00:00 |
| Creation Date | 2016-12-13 14:32:21 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2016-12-13 14:32:27 |
| Document Title | UltraSmartâ„¢ Triple Dual Interfaces for production |
| Document Creator | Acrobat PDFMaker 10.1 for Word |
| Document Author: | Simon MAILLIOT |
USN3se, MX3se-3I3P - Datasheet V1R01c ULTRASMART™ TRIPLE DUAL INTERFACES FOR PRODUCTION (USN3se, MX3se-3I3P) Industrial equipment to personalize contact and contactless smart cards or modules. Datasheet V1R01c Date: December 2016 © 2016, Smartware CONFIDENTIAL USN3se, MX3se-3I3P - Datasheet V1R01c Copyright All rights of translation adaptation and reproduction by any mean reserved for all the countries. Any reproduction or any complete or partial representation of the pages published in this work, made without the written permission of SMARTWARE is illicit and constitutes an imitation, whatever mean is used. Only reproductions strictly reserved for the private use of the purchaser and not intended to be used collectively are authorized. So are the short quotations justified by the scientific or informative nature of the work which they are extracted from (art L.122-4 L. 122-5 and L. 335-2 of the French Code ruling on intellectual property). © SMARTWARE, Les ULIS, France, 1999-2016 Disclaimers Information in this document is subject to change without notice and does not represent a commitment on the part of SMARTWARE. CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c Contents Overview .......................................................................................................... 5 Block diagram ................................................................................................. 6 Functional description .................................................................................... 7 3.1 Core interfaces ....................................................................................................................... 7 3.2 Contact interfaces .................................................................................................................. 7 3.2.1 ISO/IEC 7816-3/4 ..................................................................................................................... 7 3.2.2 SWP .........................................................................................................................................7 3.2.3 Hardware measurements ......................................................................................................... 8 3.3 Contactless interfaces ........................................................................................................... 9 Technical characteristics ............................................................................. 10 4.1 Mechanical layout ................................................................................................................. 10 4.2 Front panels .......................................................................................................................... 11 4.3 Physical interfaces ............................................................................................................... 12 4.3.1 Connectors ............................................................................................................................. 12 4.3.2 Configuration and address switches ....................................................................................... 14 4.3.3 LEDS ...................................................................................................................................... 16 4.4 Electrical characteristics ..................................................................................................... 17 4.4.1 Power Supply ......................................................................................................................... 17 4.4.2 Contact interfaces................................................................................................................... 18 4.4.3 Contactless interfaces ............................................................................................................ 19 Regulatory ..................................................................................................... 20 Contact information ...................................................................................... 22 Revision history ............................................................................................. 22 © 2016, Smartware CONFIDENTIAL USN3se, MX3se-3I3P - Datasheet V1R01c Abbreviations ACT APDU BGT BWT CID CLT CRC CWT EGT EOF ESD ETU FDT FSCI FSDI FWT HCI LLC NAD SHDLC SFGT SOF SPU SWP WWT Activation Protocol Application Protocol Data Unit Block Guard Time Block Waiting Time Card Identifier ContactLess Tunnelling Cyclic Redundancy Check Character Waiting Time Extra Guard Time End Of Frame Electrostatic Discharge Elementary Time Unit Frame Delay Time Frame Size Card Integer Frame Size Device Integer Frame Waiting Time Host Controller Interface Logical Link Control Node Address Simplified High Level Data Link Control Startup Frame Guard Time Start Of Frame Standard or Proprietary Use Single Wire Protocol Work Waiting Time Glossary 12 V 3A: 12 Volt 3 Amp Direct Current (DC) power supply Modulation index: Defined as the voltage ratio (Vmax - Vmin) / (Vmax + Vmin). CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c OVERVIEW USN3se and MX3se-3I3P are industrial solutions dedicated to the personalization of contact and contactless smart cards and memory cards. USN3se fulfills any integration based on Smartware industrial racks while MX3se-3I3P is dedicated to the Datacard MX smart card module. Core interface features Hardware specification: - 32 bit Freescale Coldfire® CPUs running at 240 MHz - 64 MB of RAM / 8 MB of Flash memories Contact interfaces features Supported protocols: - ISO/IEC 7816-3/4 - SWP - Synchronous memory cards - Proprietary protocols MX3se-3I3P Key programmable parameters: - Contacts voltage - Card clock frequency up to 20 MHz - Communication protocol parameters Electrical tests: - Continuity measurement Contactless interfaces features Supported protocols: ISO/IEC 14443-2/3/4 ISO/IEC 15693-2/3 MasterCard PayPass Sony FeliCaTM NXP MIFARETM and MIFARE PlusTM - Proprietary protocols Key programmable parameters: - RF output level - Communication bit rate up to 848 kbps - Communication protocol parameters USN3se Other features In system firmware updates Target applications - Production environment - Contact reader/encoder - Contactless reader/encoder Electrostatic discharge sensitivity The USN3se and MX3-3I3P uses semiconductors that can be damaged by electrostatic discharge (ESD). Observe precautions for handling. Damage due to inappropriate handling is not covered by the warranty. Handling and connections should be done without power supply. This product includes a hot surface. A fire enclosure must be provided in the end product. © 2016, Smartware CONFIDENTIAL USN3se, MX3se-3I3P - Datasheet V1R01c BLOCK DIAGRAM INTERFACE A Iogic : - Interface Ied DAC Voltage Control aStX Node Base Serial port 1 SWt FPID progaming port Contacts Switchs C1..C8 SCX DAC Continuity Test To J30 backplane connector To optional connectors ST8000/ST8001 (aX6e version only) Ethernet 100 MNps ADC Ethernet 100 MNps Ethernet 100 MNps CtU CtLD Flash RAa Node Offset SI-BUS Ethernet Switch Firmware (Contact & Contactless Interface) Contact Interface Contactless Interface RF aodulator RF Amplifier CLX Clocks RF aodem Iogic : - Interface Ied INTERFACE B Idem Interface A INTERFACE C Idem Interface A Synoptic chart of one communication interface CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c FUNCTIONAL DESCRIPTION USN3se and MX3se-3I3P are Smartware assemblies that include three independent US-NANO modules. Each US-NANO module provides a CPU core and a dual communication interfaces for contact and contactless smart cards or smart objects. 3.1 CORE INTERFACES An US-NANO module embeds the last generation of 32 bit Freescale ColdFire® CPU running at 240 MHz, with 64MB of RAM and 8MB of Flash. MLOS proprietary multitasking operating system provides all resources to connect and use the core interfaces such as the Ethernet and the Serial ports. MLOS also manages additional user or system applications to drive all specific hardware resources like the contact and contactless interfaces. 3.2 CONTACT INTERFACES 3.2.1 ISO/IEC 7816-3/4 CARD system application handles the standard ISO7816 smart card protocol. Its rich interface allows to perform fast communication exchanges and to subtly configure all protocol parameters. Non-exhaustive list of software features and configuration parameters: • Smart cards voltage configuration with support of class A, B and C. • Smart card clock frequency from 1 to 20 MHz. • Communication bit rate (ETU). • Automatic T=0 or T=1 protocol handling. • Short and extended APDU exchanges. • Protocol timing specific parameters such as EGT, WWT, BGT, CWT, BWT, etc. • Character and block error management and recovery. • Access to contact states for custom protocols. 3.2.2 SWP SWP system application handles the ETSI standards (TS 102 613 and TS 102 622) to support exchanges through the Single Wire Protocol. Non-exhaustive list of software features and configuration parameters: • Support LLC (ACT, SHDLC, CLT) and HCI layers. • Supply voltage configuration with support of class B and C. • Communication bit duration from 0.590us up to 10 us. • Automatic CRC and Bit stuffing management. © 2016, Smartware CONFIDENTIAL USN3se, MX3se-3I3P - Datasheet V1R01c 3.2.3 Hardware measurements Each contact interface has specific resources to perform electrical measurements on the ISO7816 smart cards pads. These measurements, called continuity tests, check the physical connection between the reader and the smart card to either detect a defective connection of the head (cable or pins), or a defective smart card internal bonding. Through CARD system application interface, the continuity tests can: • Check the connection from the reader’s contact interface to the smart card pads. • Measure the serial resistor (due to cable, test head, or deficient contact pin) for each smart card pad. • Check the smart card clamp diodes between C1/2/3/4/6/7/8 and C5 and return their threshold voltage values. With such measurement, the contact can be declared: Open (i.e.: no bonding, damaged diode). Short (i.e.: wrong bonding, shortcut, damaged diode…). Good (bonding and diodes are in conformity). To properly test one contact, all others contacts shall be in high impedance state, and C5 contact must be driven by the reader (i.e. it should not be linked to the ground/earth). Force C5 ICC C1 C5 C2 C6 C3 C7 C4 C8 Cx Voltage measurement of the clamp diode for contact C3 CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c 3.3 CONTACTLESS INTERFACES CARD system application handles all supported contactless smart cards standards or specifications. It includes: • ISO/IEC 14443 levels 2, 3 and 4, with the support of both type A and type B cards. • ISO/IEC 15693 levels 2 and 3. • MasterCard PayPass • Sony FeliCaTM • NXP MIFARETM and MIFARE PlusTM Non-exhaustive list of software features and configuration parameters: • Adjustable carrier field strength • Communication bit rate up to 848 kbps. • Protocol timing specific parameters such as EGT, FWT, FDT, SFGT, etc. • Protocol communication specific parameters such as NAD, CID, FSCI, FSDI, SOF, EOF, etc. • ISO7816 short and extended APDU exchanges. • Protocol specific error detection and recovery. • Authentication mechanisms requiring cryptography and ciphered exchanges. At last, contactless interfaces support both contactless smart cards with inductive coupling to an antenna and contactless modules with a direct connection to the RF pads. © 2016, Smartware CONFIDENTIAL USN3se, MX3se-3I3P - Datasheet V1R01c TECHNICAL CHARACTERISTICS 4.1 MECHANICAL LAYOUT 100.00 Ø2,70 CLA 5,50 13,50 CLB SCA 3,57 10,00 1,50 2,50 13,50 5,55 CLC SCB SCC 2,50 13.08 19.42 5,50 1 2 InterIO MSPC SWC PowerCom 5,00 1 2 LC 1 2 InterIO MSPB SWB 196,10 PowerCom 1 2 InterIO MSPA 152,30 207,50 1 2 220.00 LB SWA 1 2 LA 107,10 PowerCom 101,60 Ø3,20 L3 S5 A1 L5 40,00 50,90 SWCFG L4 S4 J30 5,50 2,76 15,00 45,00 L1 L2 ST8000 DIN 41612 C/2 Mâle R/A 16 x 3 2.00 USN3se or MX3se-3I3P top side view 10 CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c GENERAL Height Length Width (USN3se) Width (MX3se-3I3P) Weight 100 mm (3U) 220 mm 20.3 mm (4 TE) 40 mm (8 TE) 360 g Components on bottom side are lower than 2 mm. The fixing attachment holes and side strips are connected to the USN3se and MX3se-3I3P electrical ground. 4.2 FRONT PANELS USN3se specific 3U / 4TE front panel MX3se-3I3P specific 3U / 8TE front panel © 2016, Smartware CONFIDENTIAL 11 USN3se, MX3se-3I3P - Datasheet V1R01c 4.3 PHYSICAL INTERFACES 4.3.1 Connectors NAME SC1 SC2 SC3 CL1 CL2 CL3 J30 4.3.1.1 CONNECTOR TYPE DESCRIPTION RJ45 RJ45 RJ45 SMB SMB SMB DIN41612 Contact interface from US-NANO A Contact interface from US-NANO B Contact interface from US-NANO C Contactless interface from US-NANO A Contactless interface from US-NANO B Contactless interface from US-NANO C Backplane interface SC1, SC2 and SC3 description SC1, SC2 and SC3 connectors provide signals of the contact interfaces. The following table describes the pinout for all interfaces: PIN Shield 4.3.1.2 NAME CC3 CC5 CC4 CC8 CC1 CC6 CC2 CC7 GND TYPE I/O GND I/O I/O I/O I/O I/O GND DESCRIPTION C3 smart card contact (CLK) C5 smart card contact (GND) C4 smart card contact (RFU1) C8 smart card contact (RFU2) C1 smart card contact (VCC) C6 smart card contact (SPU) C2 smart card contact (RST) C7 smart card contact (I/O) Ground CL1, CL2 and CL3 description CL1, CL2 and CL3 connectors provide signals of the contactless interfaces. The following table describes the pinout for all interfaces: PIN Center Body 12 NAME RF_ANT GND TYPE GND DESCRIPTION RF output Ground CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c 4.3.1.3 J30 description The DIN41612 connector provides power, node identifier, serial ports, Ethernet port, safe mode, and LEDs. The pinout configuration is different from USN3se to MX3se-3I3P. 4.3.1.3.1 USN3se backplane pinout PIN A1, A4, B15, C15, B16, C16 A2, B2, C2, A3, B3, C3, A7, B7, A8, B8, C8, A9, A10, B10, C10, C11, A14, B14, C14 A15, A16 B1 C1 B4 C4 A5 B5 C5 A6 B6 C6 C7 B9 C9 A11 B11 A12 B12 C12 A13 B13 C13 NAME Gnd Ground NC Not connected +Vaa L1Tx L1Rx Node0 Node1 Node2 Node3 Node4 Node5 Node6 Node7 Safe_Mode +3V3 LiLed ETH_BP_3P ETH_BP_3M ETH_BP_1P ETH_BP_2P ETH_BP_0P ETH_BP_1M ETH_BP_2M ETH_BP_0M Main Power Supply (+12V) Line 1 RS232 transmit (US-Nano A) Line 1 RS232 receive (US-Nano A) Node Base bit 0 Node Base bit 1 Node Base bit 2 Node Base bit 3 Node Base bit 4 Node Base bit 5 Node Base bit 6 Node Base bit 7 Active low Safe Mode 1 Internal +3.3V output Active Low Link Led 2 Ethernet Pair 3 + 3 Ethernet Pair 3 - 3 Ethernet Pair 1 + Ethernet Pair 2 + 3 Ethernet Pair 0 + Ethernet Pair 1 Ethernet Pair 2 - 3 Ethernet Pair 0 - Internal pull up resistor Internal serial resistor for current limiting function Termination only © 2016, Smartware DESCRIPTION CONFIDENTIAL 13 USN3se, MX3se-3I3P - Datasheet V1R01c 4.3.1.3.2 MX3se-3I3P backplane pinout PIN NAME A1, B1, C1 A2, B2, C2, C4, C5, C6, C7, C8, A9, B9, C9, A10, B10, C10, A11, B11, C11, C12, A13, C13, A14, C14, A15, C15, A16, C16 A3, B3, C3 A4 B4 A5 B5 A6 B6 A7 B7 A8 B8 A12 B12 B13 B14 B15 B16 DESCRIPTION Gnd Ground NC Not connected +Vaa Node2 Node3 Node0 Node1 ETH_BP_1P ETH_BP_1M ETH_BP_0P ETH_BP_0M Node4 Node5 Node6 Node7 ETH_BP_2P ETH_BP_2M ETH_BP_3P ETH_BP_3M Main Power Supply (+12V) Node Base bit 2 Node Base bit 3 Node Base bit 0 Node Base bit 1 Ethernet Pair 1 + Ethernet Pair 1 Ethernet Pair 0 + Ethernet Pair 0 Node Base bit 4 Node Base bit 5 Node Base bit 6 Node Base bit 7 Ethernet Pair 2 + 1 Ethernet Pair 2 - 1 Ethernet Pair 3 + 1 Ethernet Pair 3 - 1 4.3.2 Configuration and address switches 4.3.2.1 SWCFG This micro switch defines specific configuration modes. PIN NAME Node 7 Node 6 Mono Mode Safe Mode DESCRIPTION Node Base (bit 7) Node Base (bit 6) ON : MLOS system in mono mode OFF : Normal operation ON : MLOS system in safe mode OFF : Normal operation The Safe Mode starts MLOS operating system normally. However, the system uses a default MLOS.INI configuration file, and does not start any system and user applications. The Mono Mode does not start MLOS operating system. It only allows to boot the CPU cores, and to communicate through a Serial port to reload an MLOS operating system. Termination only 14 CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c 4.3.2.2 SWA, SWB and SWC These micro switches set US-NANO A, B and C boards node offset respectively. An US-NANO unique node value is made from the global node base value (from J30 and SWCFG), and a specific offset (from SWX switch). US-Nano Node (interface X) = Node base + Node offset (interface X) PIN NAME Node offset b0 Node offset b1 Node offset b2 RFU DESCRIPTION Node offset bit 0 Node offset bit 1 Node offset bit 2 The default configurations of the node offsets are: MODEL USN3se USN3se USN3se MX3se-3I3P MX3se-3I3P MX3se-3I3P © 2016, Smartware INTERFACE NODE OFFSET VALUE CONFIDENTIAL 15 USN3se, MX3se-3I3P - Datasheet V1R01c 4.3.3 LEDS NAME DESCRIPTION SCX_Green Contact interface power on status LED SCX_Yellow CPU status LED. Blink if CPU is running correctly CLX_Green Contactless interface power on status LED L1, LA L2, LB L3, LC L4 Safe Mode Status • ON if Safe Mode is activated Mono Mode Status • ON if Mono Mode is activated US-Nano A Ethernet link status • ON if link is established US-Nano B Ethernet link status • ON if link is established US-Nano C Ethernet link status • ON if link is established Backplane Ethernet link status • ON if link is established Backplane Ethernet speed S4 • ON (100 Mbps) • OFF (10 Mbps) 16 L5 Not used for models USN3se and MX3se-3I3P S5 Not used for models USN3se and MX3se-3I3P CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c 4.4 ELECTRICAL CHARACTERISTICS GENERAL Operating environment 0 °C to 40 °C 4.4.1 Power Supply An USN3se or MX3se-3I3P assembly shall be powered by a 12 Volt 3 Amp Direct Current (DC) power supply. POWER SUPPLY TYPICAL Rating Voltage (12 V 3A) Idle Current (Vaa = 12 V) Maximum Current (Vaa = 12 V, RF Output short circuited) © 2016, Smartware CONFIDENTIAL 12 V DC 950 mA 1850 mA PRECISION ±1.2V 17 USN3se, MX3se-3I3P - Datasheet V1R01c 4.4.2 Contact interfaces 4.4.2.1 Pin drivers CONTACT DRIVING CAPABILITY C1 (VCC) C2 (RST) C3 (CLK) C4 (RFU1) C5 (GND) C6 (SPU) C7 (I/O) C8 (RFU2) CONTACT SIGNAL CAPABILITY Vcc Icc limitation ISO/SWP Mode VOH VOL VIH VIL Current limitation 1.65 < Vcc < 1.95 2.30 < Vcc < 2.70 3.00 < Vcc < 3.60 4.50 < Vcc < 5.50 Clock ISO Mode C5 impedance to ground 4.4.2.2 Vcc, HiZ VOH, VOL, HiZ1 VOH, VOL, Clock, HiZ1 VOH, VOL, HiZ 1 Gnd, HiZ1 VOH, VOL, SWIO, HiZ1 VOH, VOL, Pull-up 2, HiZ VOH, VOL, HiZ1 Min 1.65 V Vcc - 0.1 V 0V 0.8 x Vcc Max 5.50 V Resolution 10 mV 200 mA Vcc 0.1 V 0.55 V ±4 mA ±8 mA ±24 mA ±32 mA 1 MHz 20 MHz 50 mΩ Hardware measurements CONTINUITY TEST Resistor measurement range Resistor measurement precision Conditions R < 1 kΩ R > 1 kΩ Current to measure a clamp diodes voltage Diode threshold voltage range Diode threshold voltage precision Min 0Ω 470 kΩ internal pull-down 10 kΩ and 4.7 kΩ software selectable internal pull-ups connected to Vcc CONFIDENTIAL Typical ±100 Ω ±10 % 2,5 mA 0.1 V 18 Precision ±20 mV Max 10 kΩ 3,2 mA 2.5 V 0.1 V © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c 4.4.3 Contactless interfaces CONTACTLESS DRIVING CAPABILITY RF output CONTACTLESS SIGNAL CAPABILITY RF Offset RF Signal peak to peak (R = ∞) Modulated RF Signal Min 20 Vpp 250 mW (+24 dBm) RF Output Impedance Current limitation Short circuit current (R = 0 Ω) RMS Recommended full power short circuit max duration RF Frequency © 2016, Smartware Typical Precision 400 mV 2 Vpp RF Signal power (R = 50 Ω) Modulation Index ISO14443 A / PayPass A / Mifare ISO14443 B / PayPass B ISO15693 FeliCaTM Max ± 2% ± 0.05 Vpp 50 Ω ±5Ω 150 mA 60 s 13.56 MHz 90 % 100 % 100 % 9.5 % 9.5 % 9.5 % 12.5 % 12.5 % 12.5 % 11 % 11 % 11 % CONFIDENTIAL ± 7 kHz 19 USN3se, MX3se-3I3P - Datasheet V1R01c REGULATORY USN3se and MX3se-3I3P models are CE, FCC modular approval, and RoHS compliant. WARNING TO USERS Warning 1: The USN3se and MX3se-3I3P models are considered as components that will be operated in combination with the final equipment. Then, the final equipment (including power supply system) still needs to re-confirm that the whole system complies with the local EMC directives. Warning 2: The USN3se and MX3se-3I3P models are low power radiofrequency emitters, and then specific precaution should be taken to restrict the human presence near the antennas. We recommend that persons should be at least at 20 cm far from the emitting antennas. This information also has to be mentioned in the end product. Access should only be authorized to qualified personal. If the product is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. Warning 3: To reduce the risk of fire or injury to persons, follow these instructions: All maintenance and servicing of this device must be performed in a safe area away from hazardous locations. Disconnect all power before servicing. Use an earthed bracelet to avoid ESD damages. Power supply must be SELV, no energy hazard. Warning 4: To comply with directives, the backplane Ethernet cable length should be less than 3 meters. Warning 5: This device has been designed to operate with the antenna(s) listed below. Antennas not included in this list are strictly prohibited for use with this device List of acceptable antenna(s): T77x49x2 Warning 6: Use of shielded contact cable (with ferrite ref Würth 74271733) is mandatory to comply with standards. Warning 7: To comply with directives, RF power may be set from power 0 to power 10. Warning 8: In case of collocated transmitters, the maximum number of transmitters in a small place should be 48. Warning 9: The product shall not be modified without written authorisation of Smartware. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Warning 10: The end product’s sticker should mention that it “contains a FCCID: RPM-USN3D201 product. 20 CONFIDENTIAL © 2016, Smartware USN3se, MX3se-3I3P - Datasheet V1R01c Warning 11: WARNING TO USERS IN THE UNITED STATES Federal Communication Commission Interference Section 15.105 Information to the user (a) For a Class A digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device (USN3se and MX3se-3I3P models) complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NO UNAUTHORIZED MODIFICATIONS 47 CFR Section 15.21 CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission from Smartware. Unauthorized modification may void the equipment authorization from the FCC and will void the Smartware warranty. This device complies with FCC RF radiation exposure limits set forth for general population (uncontrolled exposure). This device must be installed to provide a separation distance of at least 20cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter other than authorized in the present document. © 2016, Smartware CONFIDENTIAL 21 USN3se, MX3se-3I3P - Datasheet V1R01c CONTACT INFORMATION For more information, please send an email to: support@smartware.fr For ordering information, please send an email to: sales@smartware.fr 22 REVISION HISTORY VERSION DATE AUTHOR CHANGES V1R01c V1R01b December 2016 November 2016 DM DM V1R01a July 2016 SHM Editorial corrections Add Regulatory section. Editorial corrections Original version CONFIDENTIAL © 2016, Smartware
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Simon MAILLIOT Create Date : 2016:12:13 14:32:21+01:00 Keywords : USN3se, MX3se-3I3P Modify Date : 2016:12:13 14:32:27+01:00 Subject : Datasheet Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:12:13 14:32:27+01:00 Creator Tool : Acrobat PDFMaker 10.1 for Word Document ID : uuid:258a8d76-4f7b-465c-9ad6-33652a2ba76d Instance ID : uuid:76e048f6-9494-4c96-8b44-a04f5056fc57 Format : application/pdf Title : UltraSmart™ Triple Dual Interfaces for production Description : Datasheet Creator : Simon MAILLIOT Producer : Adobe PDF Library 10.0 Source Modified : D:20161213133200 Company : Smartware Comments : Industrial equipment to personalize contact and contactless smart cards or modules. Category : Confidential Version : V1R01c Headline : Datasheet Page Layout : OneColumn Page Count : 22EXIF Metadata provided by EXIF.tools