Snap One C4HC250 HOME AUTOMATION CONTROLLER User Manual

Control4 HOME AUTOMATION CONTROLLER USERS MANUAL

a href="https://usermanual.wiki/Snap-One" itemprop="url"> Snap One >

USERS MANUAL

™Box ContentsThe following items are included in the HC-250 box:• HC-250 Controller• AC power cord• IR emitters (4)• Universal Television Mounting Plate• Screws (4)• Contact/Relay Terminal Block• Ferrite clamps (4)Accessories Available for Purchase• Rack Mount Kit (C4-1URMK1B-B or C4-1URMK2B-B)• Serial Cable Kit (C4-CBL3.5MM-DB9B)WarningsWARNING! To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture.AVERTISSEMENT! Pour réduire le risque de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité.CAUTION: In an over-current condition on USB or contact output the software disables the output and then blinks the power LED for 10 seconds. When a USB overcurrent fault is detected, you will see the power light blink the LED five (5) times per second. When a contact overcurrent fault is detected, you will see the power light blink the LED 12 times a second. After the 10-second blinking period is over the over-current circuit will be re-enabled. If the over-current condition remains, then the same sequence will repeat itself.ATTENTION : Dans une condition de surintensité sur USB ou sortie de contact le logiciel désactive sortie, puis le DEL Power clignote pendant 10 secondes. Quand une erreur de condition de surintensité sur USB est détectée, vous verrez le DEL Power clignoté le DEL (5) fois par seconde et puis quand un défaut de condition de surintensité sur contact est détecté, vous verrez le DEL clignoté 12 fois par seconde. Après la période Supported Model• C4-HC250-BL – HC-250 Controller, BlackIntroductionThe Control4® HC-250 Controller (HC-250) provides ways to control lights, home theaters, distributed audio and video systems, and other devices controlled by Infrared (IR), IP, Serial, Contact, or Relay connections. The Controller has a fast processor, built-in WiFi, HDMI for audio and video, improved ZigBee radio, and is perfect for smaller systems!The HC-250 also provides extensive media management for audio and video content: CDs, DVDs, and Blu-ray Discs, or digital media stored on connected devices. Use an external storage device with USB or NAS connectivity to store music and photos. The HC-250 fits easily behind a TV, stacked with AV devices, or mounted on a rack using the Rack Mount Kit (sold separately).After you install and configure the HC-250 (using the Composer Pro software) along with other system components, your customers can control their system using the On-Screen Navigator, MyHome apps, System Remote Controls, Touch Screens, or any other Control4-supported interface devices (sold separately).HC-250 ControllerInstallation Guide 1
™de 10 secondes de clignotement, le circuit de sur-courant sera réactivé. Si la condition de surintensité reste donc la même, la séquence se répète.For more information, refer to the Products or Documentation pages at www.control4.com.Requirements and SpecificationsNOTES: (1) We recommend using Ethernet rather than WiFi for the best network connectivity. (2) The Ethernet or WiFi network should be installed prior to starting the HC-250 installation. (3) The HC-250 is only compatible with PoE injectors that have DC ground isolated from AC ground. The easiest way to determine if this is the case is to use PoE injectors that only have a two-prong AC power cord. You can find additional PoE information on the Control4 Knowledgebase.(4) Ferrite clamp installation. When installing a Control4® HC-250 Controller, also install the enclosed ferrite clamps as described in this document. Ethernet cable. Install two (2) ferrite clamps on the Ethernet cable no farther than 6 inches from the HC-250 Ethernet jack.Video cable. Install two (2) ferrite clamps on each end of the HDMI or Component video cable no farther than 6 inches from the HC-250 and the TV.HC-250 ControllerInstallation Guide The software required to configure this device is Composer Pro. See the Composer Pro User Guide for details.HC-250 SpecificationsModel Number C4-HC250-BLNetwork Ethernet—requiredWiFi (only supportedwhen the unit is used in asingle-Controller system or as a Secondary Controller)Media Recognition Online CD/DVD/Blu-ray recognition and media information serviceVideo HDMI 1.4 output; Component Video outputAudio Playback Formats MP3: 32kbps to 320kbps, CBR, VBR, AAC, and FLACDisplay LED indicatorsPower Requirements 100-240 VAC, 60/50 Hz, 0.25 A MAX. Power limits: 30W maximum, 10W minimum. PoE requirement: 13W. IR: <100 mW or 20mA of current.Contact (1) DC - 36V maximum operation (low voltage) Maximum output current for 12V rail: 125mARelay (1) AC - 36V, 2A DC - 24V maximum operation (low voltage)Dimensions (H x W x D) 1.23” (31.19 mm) x 8.59” (218.13 mm) x 4.92” (125.01 mm)Weight 1.3 lbs/0.589 kgShipping Weight 2.7 lbs/1.224 kgAdditional ResourcesThe following resources are available for more support.• Control4 Knowledgebase and Forums• Control4 Technical Support• Control4 website: http://www.control4.com• Composer documentation in online help or PDF format available on the Dealer portal2
Download:
Mirror Download [FCC.gov]
Document ID1733331
Application ID0O1eIlx/Y9FJBTsRIKbuaQ==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize65.5kB (818722 bits)
Date Submitted2012-06-29 00:00:00
Date Available2012-06-29 00:00:00
Creation Date2017-10-31 02:31:01
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-31 02:31:01
Document TitleUSERS MANUAL
Document CreatorAdobe InDesign CS5 (7.0.4)
FCC ID Filing: R33C4HC250

Navigation menu