Snap One C4HC800 Home Controller User Manual

Control4 Home Controller

a href="https://usermanual.wiki/Snap-One" itemprop="url"> Snap One >

user manual

™(sold separately).Box ContentsThe following items are included in your Home Controller box:• Home Controller HC-800• AC to DC power adapter with power cord• Six (6) IR emitters• Three (3) antennae: One (1) for ZigBee and two (2) for WiFi• Warranty cardAccessories for Purchase• Rack Ear Kit (C4-1UREK-B)• Antenna Kit (C4-AK-WIFI)WarningsWARNING! To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture.AVERTISSEMENT! Pour réduire le risque de choc électrique, n’exposez pas cet appareil à la pluie ou à l’humidité.WARNUNG! Um das Risiko des elektrischen Schlages zu verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.WARNING! This CLASS I apparatus must be connected to an AC mains socket outlet that has a protective earthing connection (i.e., third-prong ground conductor). DO NOT DEFEAT THE PROTECTIVE EARTHING CONNECTION!For a more information, refer to the Product pages at http://www.control4.com.Requirements and SpecificationsPrior to installing this product, ensure that Ethernet network wiring is in place. If you’re using WiFi, see “Antenna Considerations.”Supported Model• C4-HC800-BL – Home Controller HC-800, BlackIntroductionThe Control4® Home Controller HC-800 provides many ways to control lights, home theaters, distributed audio and video systems, and other devices controlled using various protocols, for example, IP, infrared (IR) Serial, Contact, and Relay. This version comes with a faster processor, built-in WiFi, HDMI for audio and video, improved ZigBee radio, and more.The HC-800 also provides extensive media management services for audio and video sources, for example, CDs, DVDs, or BluRays stored in connected devices. It allows you to use an external storage device with USB or eSATA support for media storage, and it supports multi-zone audio capabilities, sending music to rooms throughout the home. The device installs on a rack or shelf, can be stacked, and uses 1 RU rack space.When you install and configure the Controller and other system components (using Control4 Composer software), your users can control the system using one of two user interfaces included in this Controller: On-Screen Navigator or a System Remote Control, or any other Control4-supported user interface device Home ControllerHC-800 Installation Guide Draft
™HC-800 SpecificationsModel Number C4-HC800-BLNetwork Ethernet—requiredWiFi (only supported when the unit is used as a Secondary Controller)Media Recognition Online CD/DVD/BluRay recognition and media information serviceAudio Playback Formats MP3: 32kbps to 320kbps, CBR, VBR, AAC, and FLACDisplay LED indicatorsPower Requirements 100-240 VAC, 60/50 Hz, 0.26 A MAXDimensions H x W x D: 2.80” (71 mm) x 11.98” (304 mm) x 7.24” (184 mm)Weight 4.7 pounds (xx kg)Shipping Weight x.xx pounds (xx kg)Additional ResourcesThe following resources are available for more support.• Your Control4 Reseller• Control4 website: http://www.control4.com• Composer documentation in online help or PDF format available on the Dealer portal.Front ViewFigure 1. Front ViewHome Controller HC-800Installation Guide 1 WiFi LED. This LED blinks first Red, then Orange, and finally Blue during the boot process. When the operating system starts running, the WiFi driver changes the LED color depending on the signal strength of its connection to its associated access point. Colors and signal strength are as follows: Orange=Fair to Good, Blue=Excellent, and No Light=No connection.2 Data LED. The Blue LED indicates that streaming audio is received.3 Link LED. The Blue LED indicates that the Controller has been identified in a Control4 Composer project.4 Power LED. The Blue LED indicates that AC power is present. It turns on immediately after power is applied to the Controller.5 IR Window / IR Blaster—For capturing third-party IR codes from hand-held devices (such as remote controls) or blasting IR codes.Back ViewConnect all applicable devices to the HC-800 using the connection options described next.Figure 2. Back View1 ZigBee. Antenna for the ZigBee radio.2 Power Plug Port. AC power receptacle for the AC to DC power cord.3 Factory Restore Button. A recessed button that restores the Controller to the factory defaults.4 Identification Button. Easily-pressed button used when identifying this device in Composer.5 Serial. DB9 connectors for two (2) serial devices, such as a receiver or disc changer. See “Connect the Serial Ports” for more information.6 IR Out. 3.5 mm jacks for up to six (6) IR output transmitters. See “Set Up IR Emitters or IR Blaster” for more information.7 Video Out (HDMI). HDMI port for displaying 132456789101112131415161712345Draft* Home Controller 19Vdc, 3A
Download:
Mirror Download [FCC.gov]
Document ID1622907
Application ID5MRNMdPMJ+C59GJ3/C+WKw==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize72.49kB (906185 bits)
Date Submitted2012-01-18 00:00:00
Date Available2012-01-20 00:00:00
Creation Date2011-08-05 10:30:21
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2012-01-12 13:13:34
Document Titleuser manual
Document CreatorAdobe InDesign CS5 (7.0.4)
FCC ID Filing: R33C4HC800

Navigation menu