Snapper 281023Bve Users Manual PartsManual

: Snapper Snapper-281023Bve-Users-Manual-227065 snapper-281023bve-users-manual-227065 snapper pdf

Open the PDF directly: View PDF .
Page Count: 82

Download
Open PDF In Browser	View PDF

Parts Manual for

REAR ENGINE RIDER
SERIES 23
MODEL
281023BVE (84871)
281123BV (7800102)
281123BV (84872)
281123BV (84940)
281123BVE (84874)
281123HVE (84883)
2811523BV (7084940)
281223BVE (85622)
2812523BVE (7085622)
2812523BVE (7800104)
281323BVE (84876)
2813523BVE (7085624)
2813523BVE (85624)
301123BV (84873)
301123BV (84941)
3011523BV (7800103)
301223BVE (85623)
3012523BVE (7085623)
3012523BVE (7800105)
301323BVE (84877)
3013523BVE (7085625)
3013523BVE (85625)
331323HVE (84885)
331523BVE (84878)
331523KVE (7084879)
331523KVE (7800106)
331523KVE (84879)
331623BVE (84954)
331723BVE (7084954)
331723BVE (7800107)
W280923BV (84881)
W281023BVE (84884)
W301023BVE (84882)
McDonough, GA, 30253 U.S.A.

Briggs & Startton Yard Power Products Group
Copyright © 2007
Briggs & Startton Corporation
Milwaukee, WI USA. All Rights Reserved

Manual No.
Revision 5,

8/24/2007

7006152

TP 400-5003-5-RE-N

Table Of Contents
PAGE
4
6
10
14
16
20
22
24
26
28
30
34
36
40
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
78

GROUP
WHEELS- FRONT & REAR
FRONT END, STEERING
MAIN CASE & L.H. FENDER
LEFT HAND FENDER & BEARING
DIFFERENTIAL, R. H. FENDER
YOKE LIFT COMPONENTS
PRIMARY CHAIN CASE & SMOOTH CLUTCH
GEAR SHIFTER ASSEMBLY
FUEL TANK & SEAT
ENGINE, MUFFLER, DRIVE DISC
CUTTING DECKS, DEFLECTOR (28" & 33" Hi-Vac)
30" CUTTING DECK, DEFLECTOR
BELTS, BRAKES, INTERLOCK
RAILS, LIFT ARMS, CAM LIFT
BLADE STOP PEDALS
SPINDLE
DECALS
ELECTRICAL SYSTEMS (For 9, 11 & 11.5HP Briggs Recoil)
ELECTRICAL SYSTEMS (For 10, 11, 12, 12.5 & 13HP Briggs)
ELECTRICAL SYSTEMS (For 13.5, 15, 16 & 17HP Briggs)
ELECTRICAL SYSTEMS (For 11 & 13HP Honda)
ELECTRICAL SYSTEMS (For 15HP Kohler)
ELECTRICAL SYSTEMS (Briggs Magneto Ground)
ELECTRICAL SYSTEMS (Kohler Magneto Ground)
WIRING SCHEMATIC (9, 11 & 11.5HP Recoil Start Briggs)
WIRING SCHEMATIC (10, 11, 12, 12.5 & 13 HP Briggs)
WIRING SCHEMATIC (13.5, 15, 16 & 17 HP Briggs Engines)
WIRING SCHEMATIC (11 & 13 HP Honda Engines)
WIRING SCHEMATIC (14 & 15 HP Kohler Engines)
HARDWARE BAGS
ACCESSORIES & ATTACHMENTS

REAR ENGINE RIDER
SERIES 23

Manual No.
3

7006152

TP 400-5003-5-RE-N

WHEELS- FRONT & REAR

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
4

SERIES 23

WHEELS- FRONT & REAR
Item Part No

Qty

Description

Note
(Includes Items 2, 3, 4, 5 & 6)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

7058943
7073563
7017146
7011807
7012234
7014669
7031038
7011032
7010935
7011022
7091516
7010821
7058951
7073584
7017147
7040434
7040433
7011035
7011201
7023522
7011013
7023895
7011817
7031732
7012332

2
1
1
2
1
1
1
1
3
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1

ASSEMBLY, Front Tire & Rim (Complete)
TIRE, 11 x 4.00-4 (Kenda)
RIM (For 4.10/3.50 x 4 Tire)
BALL BEARING, Flange (3/4” I.D.)
VALVE STEM, Snap In
LUBE Fitting
CAP, Dust
FELT SEAL
WASHER, .77 x 1.13 x .06 Flat
HUB CAP
COTTER PIN, 5/32 x 1”
TUBE, Inner (For 4.10/3.50 x 4 Tire)
ASSEMBLY, Rear Tire & Rim (28”, 30”, 33” Models)
TIRE, 16-6.50 x 8
RIM, Extra Wide (For 16/7.50 x 8 Tire) (33” Models)
HUB, Rear Wheel L. H. (Weldment)
HUB, Rear Wheel R. H. (Weldment)
AXLE BOLT, Left Hand (5/16-24 x 1-5/8” Tapered)
NUT, Wheel Bolt, 5/16-24 Hex Center Lock
CAP, Hub, L. H. (Long Axle)
WHEEL BOLT, Right Hand (5/16-24 x 2” Tapered)
CAP, Hub
SEAL, 1.22" ID x 1.875" OD
CAP, Seal 1.0" ID x 1.67" OD, Right Hand (Shown)
CLAMP, Right Hand 2”

25
26

7014542
7091502

1
3

CLAMP, Right Hand 2.69"
BOLT, 1/2-20 x 3/4” Lug, GR 5

(Includes Items 5, 14 & 15)

(8 & 10 HP)
(used on 8, 10, 11.5, 12.5, 13 &
17 HP)
(used on 12, 14 & 15 HP)

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
5

7006152

TP 400-5003-5-RE-N

FRONT END, STEERING

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
6

SERIES 23

FRONT END, STEERING
Item Part No
1
2
3
4
5
6
7
8
9
10
10
11
12
13
14
14
15
16
17
18
19
20
21
21
22
23
24
25
26
27
28
29
30
31
32
33
34

7058030
7023781
7013862
7023667
7023671
7090296
7090183
7046158
7101192
7022449
7074131
7090372
7034174
7091495
7054378
7053266
7074561
7074560
7090913
7011714
7038243
7015444
7014049
7014048
7010776
7047888
7011815
7010694
7046232
7090753
7010746
7010935
7010986
7090364
7090122
7013321
7041687

Qty
1
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
1
1
2
1
1
1
2
2
1
1
1
1
1
1
2
6
4
2
4
4
1

Description

Note

ASSEMBLY, Steering Wheel (for 5/8” shaft)
LOGO, Steering Wheel
ROLL PIN, 1/4 x 1-1/2”
FOAM COVER, Steering Shaft
COVER, Steering Shaft
PIN, 3/16 x 1” Cotter
WASHER, .66 x 1.31 x .09 Flat
BUSHING, Nylon
CABLE, Brake, Snap-In
CABLE, Clutch/Brake (54.32” long)
CABLE, Clutch/Brake (55” long)
NUT, 1/4-20 Hex Center Lock, GR 5 or B
CONNECTOR, Cable
SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
WELDMENT, Front Axle, Narrow
WELDMENT, Front Axle, Wide
BOTTLE, Water
HOLDER, Bottle (Wire)
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
HAIR PIN 2-1/4”
LATCH, Parking Brake
SPRING, Parking Brake Latch
FOOT PAD, Short (5.5” x 4.7”)
FOOT PAD, Long (5.5” x 9.5”)
RING, 1/2” External Retaining (Heavy Duty)
WELDMENT, Clutch Pedal
PAD, Pedal
BUSHING, Nylon
WELDMENT, Steering Shaft
PIN, 3/16 x 1-1/2” Cotter
RING, 5/8” External Retaining
WASHER, .77 x 1.13 x .06 Flat
BEARING, Nylon
PIN, 5/32 x 1” Cotter
WASHER, 3/8” Flat SAE
BUSHING, Tie Rod
WELDMENT, King Pin, Left Hand

Includes item 2

replaces 7072648 (voided)
used on 25”, 28” & 30” Decks
used on 33” & 42” Decks

used on 25”, 28” & 30” Decks
used on 33” Decks

or 7091514

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
7

7006152

TP 400-5003-5-RE-N

FRONT END, STEERING

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
8

SERIES 23

FRONT END, STEERING
Item Part No
35
36
37
37
38
38

7041688
7090365
7013023
7012541
7012933
7012540

Qty
1
2
1
1
1
1

Description

Note

WELDMENT, King Pin, Right Hand
PIN, 1/8 x 3/4” Cotter
TIE ROD, Left Hand (7.41” long)
TIE ROD, Left Hand (9.91” long)
TIE ROD, Right Hand (7.41” long)
TIE ROD, Right Hand (9.91” long)

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
9

7006152

TP 400-5003-5-RE-N

MAIN CASE & L.H. FENDER

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
10

SERIES 23

MAIN CASE & L.H. FENDER
Item Part No

Qty

Description

Note

1
2
3
4
5
6
7
8
9
10
10

7028990
7028989
7073268
7074210
7091198
7090358
7031100
7010969
7074650
7053697
7053698

1
1
1
1
2
1
1
2
1
1
1

COVER, Battery
COVER, Switch
COVER, Solenoid
BRACKET, Belt Adjuster
SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap
SCREW, 5/16-24 x 2-1/2” Hex Head Cap, GR 5
TUBE CLAMP
NUT, 5/16-24 Flange Lock (Large)
BUSHING, Pivot
WELDMENT, Main Case (Standard) (shown)
WELDMENT, Main Case (Commercial) (not shown)

11
12
13
14
15
16
17
18
19
20
21
22
23

7034299
7028200
7091503
7090793
7011791
7091296
7091315
7091297
7090595
7024998
7090238
7077692
7074946

2
2
2
4
4
4
7
7
2
3
4
4
1

WING, Rear
SWIVEL, Adjustable
HAIR PIN, 3/32 x 1-1/2”
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
RETAINER, 5/16” Bolt
WASHER, 5/16” Flat
WASHER, .32 x .58 x .08 Split Lock
NUT, 5/16-24 Hex, GR 5
BOLT, 5/16-18 x 3/4” Hex Flange Lock, GR 5
PLUG, 1” Hole
SCREW, 5/16-24 x 1” Hex Head Cap, GR 5
BOLT, M8-1.25 x 25mm, Self-Tap (Kohler)
PLATE, Engine (Kohler Engine)

24
25
26
27
28
29
30
31
32
33
34
35
36

7030798
7036367
7090484
7010153
7090188
7090361
7090391
7012652
7090206
7091513
7091272
7047189
7090585

2
1
4
2
2
14
1
1
1
4
7
1
6

BUMPER, Rear
BUMPER (1-Piece) (33” Deck)
SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap
CAP, Bumper
WASHER, 11/32” Flat
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
WASHER, 5/16” Internal Tooth Lock
CLIP, Wire
SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5
SCREW, 5/16-24 x 1-3/4” Hex Head Cap, GR 5
FASTENER, 1/4” Ratchet
BRACKET, Drive Support
NUT, 5/16-18 Hex Flange Lock, GR 5

replaces 7022509 (voided)
used on E331523KVE Model
only

Used on Euro models only

used on E331523KVE Model
only

or 7091506

or 7091867

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
11

7006152

TP 400-5003-5-RE-N

MAIN CASE & L.H. FENDER

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
12

SERIES 23

MAIN CASE & L.H. FENDER
Item Part No

Qty

Description

Note
used on E331523KVE Model
only

37

7036419

1

BELT GUIDE, K 30/33 (9.48" Bolt Pattern Bent Top)

38A
38B
39
40
41
42
43
44
45

7017653
7036418
7023676
7041384
7033799
7011018
7073735
7090981
7037285

1
1
1
1
1
1
1
2
1

BELT GUIDE, 25, 26, 28, 41" (5.74" Bolt Pattern, 4.74" Belt Gap)
BELT GUIDE, 30/33 (5.74" Bolt Pattern, 5.0" Belt Gap)
used on 331723BVE Model only
SHIFT LINK, Long (5/16-24 both ends)
WELDMENT, Shift Arm
CROSS BRACE
SHIFT LINK, Short (5/16-24 thread)
BRACKET, Switch
SCREW, #10-32 x 1/4” Hex Washer Self-Tap
FENDER, Left Hand (1.628" I. D. Hole)

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
13

7006152

TP 400-5003-5-RE-N

LEFT HAND FENDER & BEARING

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
14

SERIES 23

LEFT HAND FENDER & BEARING
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12

7012332
7075115
7011072
7011071
7052827
7074182
7074500
7075848
7011070
7037285
7010969
7012271

Qty
2
1
1
1
1
2
1
1
1
1
1
1

Description

Note

BOOT CLAMP, 2”
BOOT, Rear Axle, Thick Flange
WASHER, Thrust
THRUST WASHER
ASSEMBLY, DX Bearing
BEARING, DX
SEAL, Axle (Dust/Grease)
FITTING, Lube, 45 Degree, 3/16” w/Hex (long shank)
TIE ROD (5/16-24 thread- both ends)
FENDER, Left Hand (1.628” I. D. Hole)
NUT, 5/16-24 Flange Lock (Large)
WASHER, Shim

or 7013324

or quantity as required

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
15

7006152

TP 400-5003-5-RE-N

DIFFERENTIAL, R. H. FENDER

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
16

SERIES 23

DIFFERENTIAL, R. H. FENDER
Item Part No

Qty

Description

Note

1
2
2
3
4
5

7090362
7012296
7054372
7010969
7031079
7038067

13
1
1
1
1
1

SCREW, 1/4-20 x 5/8” Hex Washer Head Self-Tap
BEARING, Axle (R. H. Fender)
BEARING-DX, Axle (R. H. Fender)
NUT, 5/16-24 Flange Lock (Large)
WASHER, Thrust
PLATE, Differential

6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22A
22B
23
24
25
26
27
28
29
30
31
32
35
---

7022115
7021127
7011072
7051584
7010988
7010964
7010941
7021129
7010965
7021128
7012332
7075115
7011024
7037279
7028762
7037280
7021158
7027644
7047763
7074431
7057398
7012333
7011156
7011782
7090395
7090188
7011042
7090361
7061017
7060411
7060662

4, 8
4, 8
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
4, 8
2
2
1
1
1
11
1
1
1

SPACER, Pinion
GEAR, Differential Pinion (12T 12P)
WASHER, Thrust
* ASSEMBLY, Drive Hex Tube
WASHER, Nylon
GEAR, 11 Tooth, 10 Pitch
CHAIN, 46 Pitch (#35 Endless)
SPROCKET, 34T, 3/8P
RING, 1-3/16” External Retaining
SPACER, Differential Case
BOOT CLAMP, 2”
BOOT, Oil Seal (Short Axle)
PLUG, 1/2” Cup Insert
CASE, Transmission
GASKET, Transmission Case
FENDER, Right Hand (1.62” Dia. Hole)
GEAR, 63 Tooth 10 Pitch (4 Hole)
GEAR, 63 Tooth 10 Pitch (8 Hole)
ASSEMBLY, Long Axle (Includes Gear)
SPACER, Differential Case
ASSEMBLY, Short Axle, 23T (Includes Gear)
BOLT, 5/16-24 x 1-5/8” Hex Special Lock (Vibresist)
5/16” O-RING
WASHER, 5/16” Belleville
WASHER, 5/16” External Tooth Lock
WASHER, .34 x .69 x .08 Flat
SCREW, 5/16-24 x 2-5/8” Hex Head Cap
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
GREASE, Transmission (24 oz. Required)
KIT, Differential (4 Pinion)
KIT, Differential (8 Pinion w/DX Bearing)

includes 1-1/8" I.D. (DX) bearing

Note: 4 holes offset - align
properly to prevent binding.

Footnotes:
Note: * Assembly includes two bearings inside hex tube (p/n 7015140, not shown) & one nylon washer (p/n 7010988, item
10).

REAR ENGINE RIDER
SERIES 23

Manual No.
17

7006152

TP 400-5003-5-RE-N

DIFFERENTIAL, R. H. FENDER

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
18

SERIES 23

DIFFERENTIAL, R. H. FENDER
Item Part No
--

7075479

Qty
1

Description

Note

KIT, Long & Short Axle (Includes items 23, 24, & 25)

Footnotes:
Note: * Assembly includes two bearings inside hex tube (p/n 7015140, not shown) & one nylon washer (p/n 7010988, item
10).

REAR ENGINE RIDER
SERIES 23

Manual No.
19

7006152

TP 400-5003-5-RE-N

YOKE LIFT COMPONENTS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
20

SERIES 23

YOKE LIFT COMPONENTS
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21

7013885
7014664
7091198
7090187
7090196
7014663
7047190
7090122
7015464
7090037
7090390
7091630
7090539
7059068
7073733
7046162
7011201
7011048
7011763
7090238
7033291

Qty
1
1
2
1
1
2
1
2
1
1
1
1
2
1
1
1
2
2
2
2
1

Description

Note

SPRING, Clutch & Brake
BOLT, 5/16-18 Shoulder
SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap
WASHER, 5/16” Split Lock
NUT, 5/16-18 Hex, GR 5 or B
SLIDE HALF
BRACKET, Slide
WASHER, 3/8” Flat SAE
STUD, Clutch Link (3/8-24 thread)
PIN, 3/32 x 3/4” Cotter
WASHER, 3/8” Internal Tooth Lock
NUT, 3/8-24 Hex, GR 5 or B
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
ASSEMBLY, Leaf Spring
ARM, Yoke
LIFT, Yoke
NUT, 5/16-24 Hex Center Lock
BEARING, Yoke
FENDER WASHER, 5/16”
SCREW, 5/16-24 x 1” Hex Head Cap, GR 5
COLLAR, Yoke

or 7091597
or 7090155

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
21

7006152

TP 400-5003-5-RE-N

PRIMARY CHAIN CASE & SMOOTH CLUTCH

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
22

SERIES 23

PRIMARY CHAIN CASE & SMOOTH CLUTCH
Item Part No

Qty

Description

Note
(Includes the following 16 items)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

7052683
7041136
7028761
7011121
7010756
7018963
7010614
7039778
7010942
7011086
7040355
7010941
7090307
7022785
7010776
7011024
7091505
7019260
7027981
7053114
7059443
7053103
7014523
7032331
7092081

1
1
1
2
2
1
1
1
2
2
1
1
10
1
1
1
1
2
1
1
1
1
1
1
4

ASSEMBLY, Primary Chain Case
WELDMENT, Primary Chain Case Half, Right Hand
GASKET, Primary Chain Case
WASHER, 5/8” Belleville
BEARING, .625 x 1.37 x .435
WELDMENT, Sprocket & Shaft
KEY,#5 Woodruff
PRIMARY CHAIN CASE HALF, Left Hand
BEARING, Needle 1.355” ID x 1.6245” OD x .5” Wide
THRUST WASHER, Nylon
WELDMENT, Hub & Sprocket
CHAIN, 46 Pitch (#35 Endless)
SCREW, 10-24 x 1/2” Hex Washer Self-Tap
ROLLER, 1-3/8 Long
RING, 1/2” External Retaining (Heavy Duty)
PLUG, 3/4” Cup Insert
NUT, 5/8-18 Hex Nyloc
O-RING, 1/2 x 5/8”
WASHER, Shim .625 x .875
ASSEMBLY, Smooth Clutch (non-asbestos)
HUB, Driven Disc (assembly)
DISC, Driven (rubber tire bonded to rim)
THRUST WASHER
PLATE, Drive Disc
NUT, 5/16-24 Hex Flange Lock

26
27
28
29
30

7052497
7012313
7090303
7091294
7072593

1
1
1
2
1

ASSEMBLY, Brake Lever (Includes brake pad & rivet)
RING, 3/8” External Retaining
NUT, 1/4-28 Hex Top Lock
WASHER, .28 x .63 x .06 Flat, GR 5
* SPACER, Brake Arm Pivot (.418/.403 long)

31
32
33

7091504
7072406
7061017

1
1

SCREW, 1/4-28 x 1” Hex Head Cap, (Washer Face) GR 5
* SPRING, Torsional Brake Return
GREASE, Transmission (Use 2 oz. Maximum)

(Includes the following 5 items)
replaces 7054243 (voided)

or 7090480, center lock flange
nut

replaces 7010916 (.300/.285
long)

Footnotes:
Note: * Brake return replacement kit (7061197) is made of items 30 & 32.

REAR ENGINE RIDER
SERIES 23

Manual No.
23

7006152

TP 400-5003-5-RE-N

GEAR SHIFTER ASSEMBLY

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
24

SERIES 23

GEAR SHIFTER ASSEMBLY
Item Part No

Qty

Description

Note

1
2
3
4
5
6
7
8
9
10

7023656
7059212
7023914
7090037
7031036
7019245
7091298
7090361
7058763
7026292

1
1
1
1
2
1
1
1
1
1

GRIP, Shift Handle
WELDMENT, Shift Handle
PIN, 1/4 x 1-3/4” Tapered Clevis
PIN, 3/32 x 3/4” Cotter
WASHER, Thrust
BUSHING, 3/4 x 1.62 Flange (Nylon)
NUT, 5/16-18 Hex Nyloc
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
* ASSEMBLY, Speed Adjustment Latch
SPRING

11
12
13
14
15
16
17A
17B
18
19
20

7090196
7010754
7073289
7091595
7015761
7019246
7040598
7043201
7010817
7091315
7091297

1
1
1
1
1
1
1
1
1
1
1

NUT, 5/16-18 Hex, GR 5 or B
SPRING, Shift Detent
LEVER, Over-Ride
WASHER, .47 x .92 x .065 Flat
SHOULDER BOLT, 5/16-18
BUSHING, 3/4 x I.O. Flange (Nylon)
WELDMENT, Arm, Shift Handle
WELDMENT, Arm, Shift Handle (w/grease ftg. Hole)
LUBE FITTING, 3/16” Press-In
WASHER, .32 x .58 x .08 Split Lock
NUT, 5/16-24 Hex, GR 5

part of Speed Adjustment Latch
Ass'y

used with 7043201

Footnotes:
Note: * Assembly is comprised of: Shift Detent Weldment (7041232), Shoulder Rivet (7029022), Reverse Stop (7073218) &
item 10.

REAR ENGINE RIDER
SERIES 23

Manual No.
25

7006152

TP 400-5003-5-RE-N

FUEL TANK & SEAT

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
26

SERIES 23

FUEL TANK & SEAT
Item Part No

Qty

Description

Note
used on 12HP & Higher Models
used on 2811523BV,
3011523BV
used on 9, 10 & 11.5HP Models
used on 12, 12.5, 14.5, 15 &
17HP Models

1
1

7075071
7075376

1
1

SEAT, Operator (11.58” tall) (shown) (Michigan V-2400 Series)
SEAT, Operator (9.30” tall) (Michigan V-2300 Series)

2
2

7051905
7052435

1
1

ASSEMBLY, Fuel Tank (Includes item 3)
ASSEMBLY, Fuel Tank with Gauge (Includes item 3A)

3
3A
4
5
5
5
6
7
8
9
10
11
11A
12
13
14
15
16
17
18
19
19
19
20
21
22A
22B

7012515
7019377
7029900
7076272
7012912
7041996
7077351
7014359
7024507
7033377
7091542
7029211
7023354
7091714
7075018
7011791
7091038
7090539
7090913
7033470
7022751
7074320
7075089
7090672
7013849
7023735
7023191

1
1
4
1
1
1
1
1
1
1
2
1
1
4
2
4
2
2
2
1
1
1
1
2
2
2
2

CAP, Fuel Tank
CAP, Fuel Tank w/Gauge
CLAMP, Fuel Line
HOSE, Fuel (1/4” I.D. x 8-1/2” long)
HOSE, Fuel (1/4” I.D. x 12-1/2” long)
HOSE, Fuel (1/4” I.D. x 6-1/2” long)
HOSE, Fuel (1/4” I.D. x 3-1/2” long)
FILTER, Fuel (In-Line)
VALVE, Fuel Shut-Off (Accessory)
BRACKET, Fuel Tank (Rear)
SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx #T-40)
SWITCH, Seat, Quick Mount (NC)
SWITCH, Seat (NC)
BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5
BRACKET, Seat
RETAINER, 5/16” Bolt
BOLT, 5/16-18 x 1/2” Hex Flange Nyloc
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
PLATE, Throttle Control
CONTROL, Throttle (23.6” long) (Briggs Engines)
CONTROL, Throttle (34.6” long) (Kohler Engines)
CONTROL, Throttle (34.6” long) (Honda Engines)
NUT, 5/16-18 Hex Flange Top Lock
SPACER, .33 x .63 x .156
KNOB, Fluted, 5/16-18 internal thread (2.15 O.D.)
KNOB, 3-Prong, 5/16-18 x 3/4” external thread

replaces 7012222 clamp
used on Briggs 8-17HP
used on Kohler Models only
used on Kohler Models only

used on seat, p/n 7028650

or 7090951

used on seat, p/n 7028650

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
27

7006152

TP 400-5003-5-RE-N

ENGINE, MUFFLER, DRIVE DISC

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
28

SERIES 23

ENGINE, MUFFLER, DRIVE DISC
Item Part No
1
1
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5A
5B
6
7
8
9A
9B
10
11
12
13
14

-------------7027972
7015352
7090362
7074453
7019358
7091738
7010210
7090132
7072658
7074187
7090585
7091495
7013849
7091065
7091576

Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
1
2
1
1
2
1
1
1
1

Description

Note

* ENGINE, 9HP Briggs (Mod 28B702-1154-E1)
* ENGINE, 10HP Briggs (Mod 214707-0113-E1)
* ENGINE, 11HP Briggs (Mod 21A907-0124-E1)
* ENGINE, 11HP Briggs (Mod 21A902-0127-E1)
* ENGINE, 11HP Honda (Mod GXV340, Type K2DET3)
* ENGINE, 11.5HP Briggs (Mod 217802-0113-E1)
* ENGINE, 12.5HP Briggs (Mod 219907-0131-E1)
* ENGINE, 13HP Briggs (Mod 21A907-0128-E1)
* ENGINE, 13HP Honda (Mod GXV39K, Type 1DET3)
* ENGINE, 13.5HP Briggs (Mod 21B907-0137-E1)
* ENGINE, 15HP Briggs (Mod 284H07-0115-E1)
* ENGINE, 15HP Kohler (Mod CV15ST, Type PS-41584)
* ENGINE, 16 or 17HP Briggs (Mod 31F777-0115-E1)
ASSEMBLY, Oil Valve
GASKET, Exhaust
SCREW, 1/4-20 x 5/8” Hex Washer Head Self-Tap
MUFFLER w/Heat Shield (Briggs 11 thru 17HP)
MUFFLER (Kohler 14 & 15HP)
SET SCREW, 5/16-18 x 3/4” Socket Head, GR8
KEY,1/4” Square x 2” Long
SET SCREW, HRSS, 3/8-16 x 3/8”
WELDMENT, 5.75” O.D. Drive Disc
WELDMENT, 5.25” O.D. Drive Disc
NUT, 5/16-18 Hex Flange Lock, GR 5
SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
SPACER, .33 x .63 x .156
NUT, 1/4-20 Hex Flange Lock
NUT, 1/4-20 Hex, GR 5 or B

recoil start
electric start
electric start
recoil start
electric start
recoil start
electric start
electric start
electric start
electric start
electric start
electric start
electric start

used on 28” & 30” Decks
used on 33” Deck Models

not shown (attaches to starter
terminal on Briggs 12.5 or 17HP)

Footnotes:
Note: * Purchase engine parts from engine manufacture dealer.

REAR ENGINE RIDER
SERIES 23

Manual No.
29

7006152

TP 400-5003-5-RE-N

CUTTING DECKS, DEFLECTOR (28" & 33" Hi-Vac)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
30

SERIES 23

CUTTING DECKS, DEFLECTOR (28" & 33" Hi-Vac)
Item Part No

Qty

Description

Note

1
2
3
4A

7073434
7091015
7091016
7061970

1
2
4
1

COVER, Spindle
SCREW, 1/4-20 x 3-1/2” Hex Head w/Free Spinning Washer
SCREW, 1/4-20 x 5/8” Hex Head w/Free Spinning Washer
DECK, 28” Replacement

4B
5
6
7
8
9
10
11
12
13
14
14
15
15A
16
17
18
19
20
21
22
23
23
24
24
25
25
26
27
28
29
30
31

7061972
7090731
7091070
7033570
7091532
7091518
7019190
7015272
7033571
7091508
7016983
7016984
7026233
7500484
7026483
7091811
7026234
7016341
7033780
7091296
7013010
7035635
7034168
7026453
7024741
7019515
7019523
7090492
7091939
7090509
7090613
7090612
7090491

1
6
8
1
3
3
3
3
2
2
1
1
1
1
2
3
1
1
1
2
1
1
1
1
1
1
1
2
2
2
9
3
2

DECK, 33” Replacement
BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR 5
NUT, 5/16-18 Hex Flange Lock, GR 5
BRACKET, Gage Wheel (Front)
SCREW, 3/8-24 x 3-3/4” Hex Head Cap, GR 5
NUT, 3/8-24 Hex Nyloc
WHEEL, Gage
SPACER
BRACKET, Gage Wheel (Rear)
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
COVER, 28” Mulcher
COVER, 33” Mulcher
DEFLECTOR, Discharge, 28” & 33”
ASSEMBLY, Discharge Deflector, 28” & 33” (without decal)
PUSH NUT, 1/4”
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
PIN, Hinge
SPRING, Hinge
HINGE, Deflector (Deck side)
WASHER, 5/16” Flat
DECAL, Danger, (Cut Finger)
BLADE, 28” Hat Shaped Hi-Lift
BLADE, 33” Hat Shaped Hi-Lift
BLADE, Ninja, 28”
BLADE, Ninja, 33”
BLADE, 28”
BLADE, 33”
NUT, 5/16-18 Wing
NUT, 1/2-20 Hex, GR 5 or B
WASHER, 1/2” Internal Tooth Lock
NUT, 3/8-16 Hex Flange Lock
BOLT, 3/8-16 x 3/4” Hex Flange Lock
SCREW, 1/2-20 x 1-1/4” Hex Head Cap, GR 5

(Painted deck w/decals & wheel
bracket fasteners)
(Painted deck with decals)

or 7090001

Incl. items 15, 16, 18, 19, & 20
or 7091811

or 7026831
standard equipment
standard equipment

was 7090559, Hex Jam Nut

was 7090392

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
31

7006152

TP 400-5003-5-RE-N

CUTTING DECKS, DEFLECTOR (28" & 33" Hi-Vac)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
32

SERIES 23

CUTTING DECKS, DEFLECTOR (28" & 33" Hi-Vac)
Item Part No
32
33
34
35
36

7060480
7037723
7090228
7090391
7090223

Qty
1
2
6
6
6

Description

Note

KIT, Air Lift, Hi-Vac (Includes items 32, 33, 35 & 36)
AIR LIFT, Hi-Vac (3 hole)
SCREW, 5/16-24 x 11/16” Oval Head Machine
WASHER, 5/16” Internal Tooth Lock
NUT, 5/16-24 Hex

used on 28” & 33” Decks

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
33

7006152

TP 400-5003-5-RE-N

30" CUTTING DECK, DEFLECTOR

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
34

SERIES 23

30" CUTTING DECK, DEFLECTOR
Item Part No

Qty

Description

Note

1
2
3
4
5
6
7
8
9
10
11
12
13

7073434
7091015
7091016
7061971
7034024
7034026
7034025
7090731
7090585
7090859
7015272
7019190
7090289

1
2
4
1
1
1
1
8
10
3
3
3
3

COVER, Spindle
SCREW, 1/4-20 x 3-1/2” Hex Head w/Free Spinning Washer
SCREW, 1/4-20 x 5/8” Hex Head w/Free Spinning Washer
DECK, 30” Replacement (Painted deck with decals)
* BRACKET, Front Anti-Scalp
* BRACKET, Anti-Scalp, 30” L.H. Rear
* BRACKET, Anti-Scalp, 30” R.H. Rear
BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR 5
NUT, 5/16-18 Hex Flange Lock, GR 5
* SCREW, 3/8-24 x 3-3/4” Hex Head Cap, GR 5
* SPACER
* WHEEL, Gage
* NUT, 3/8-24 Hex Center Lock, GR 5 or B

14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35

7091508
7091296
7090492
7052553
7026846
7024569
7016428
7025047
7013010
7091510
7090612
7090613
7090392
7090509
7090559
7018069
7026565
7060735
7090228
7031724
7090391
7090223

2
2
2
1
1
1
1
1
1
3
3
9
2
2
2
1
1
1
6
2
6
6

BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
WASHER, 5/16” Flat
NUT, 5/16-18 Wing
ASSEMBLY, 30” Deflector (Incl. items 18, 19, 20 & 22)
PIN, Hinge (Straight, 8-7/8” long)
HINGE, Deflector (8” long)
SPRING, Hinge
DEFLECTOR, 30” Deck
DECAL, Danger, (Cut Finger)
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
BOLT, 3/8-16 x 3/4” Hex Flange Lock
NUT, 3/8-16 Hex Flange Lock
SCREW, 1/2-20 x 1” Hex Head Cap, GR 5
WASHER, 1/2” Internal Tooth Lock
NUT, 1/2-20 Hex Jam
BLADE, 30”
BLADE, Ninja, 30”
KIT, Air Lift (Includes items 4 thru 7)
SCREW, 5/16-24 x 11/16” Oval Head Machine
AIR-LIFT (30” Models)
WASHER, 5/16” Internal Tooth Lock
NUT, 5/16-24 Hex

or 7091070
or 7091532

or 7091518 (3/8-24 Hex Nyloc
Nut)

or 7090606

Footnotes:
Note: * These parts comprise # 7061157 (Gage Wheel Kit for 30” Snapper Decks). Bracket mounting fasteners are also
included.

REAR ENGINE RIDER
SERIES 23

Manual No.
35

7006152

TP 400-5003-5-RE-N

BELTS, BRAKES, INTERLOCK

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
36

SERIES 23

BELTS, BRAKES, INTERLOCK
Item Part No
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36

7043844
7022252
7074467
7032027
7018781
7015290
7091299
7029624
7091497
7035728
7036526
7090858
7046567
7010740
7090037
7036521
7047787
7014314
7046874
7091514
7035378
7014304
7034852
7090122
7090055
7046677
7046648
7091974
7059254
7014168
7012055
7090299
7018524
7038021
7090362
7090555
7090761

Qty
1
1
1
2
1
1
2
2
2
1
1
5
1
2
3
1
1
1
1
2
1
1
1
2
4
1
1
1
1
1
1
1
1
1
2
1
1

Description

Note

* BELT, Drive (73.75” AA Section)
* BELT, Drive (72.75” AA Section)
NUT, 3/4-16 Hex Jam, GR 8
WASHER, 49/64” I.D. x 1-1/2” O.D. Flat
PULLEY, Deck
PULLEY, Hub (Powdered Metal)
NUT, 3/8-16 Hex Nyloc
IDLER PULLEY, 4” Idler
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5
BRACKET, Fixed Idler
BRACE, Fixed Idler Bracket
SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
HANDLE, Blade Engagement (Flip)
RING, 2” External Retaining
PIN, 3/32 x 3/4” Cotter
SPRING, Extension, 4” x 1/2” Diameter
WELDMENT, Idler Arm
SPACER, .39 x 1.0 x .31 Nylon
GRIP, Handle
WASHER, 3/8” Flat
DRUM, Brake Spindle
PIN, 1/4 x 1-5/8” Clevis
BAND, Brake (Formed)
WASHER, 3/8” Flat SAE
WASHER, 1/4” Flat
EYE-BOLT, 1/4-20 x 4”
SPRING, Torsion, Flip Handle
PIN, 3/16 x 1” Clevis
WELDMENT, Blade Engagement Handle
SPRING, Blade Handle
ROD, Idler Control
SCREW, #10-32 x 1” Hex Washer Head Self-Tap
SWITCH, Deck Interlock (NO)
MOUNT, Handle/Switch
SCREW, 1/4-20 x 5/8” Hex Washer Head Self-Tap
PIN, 3/32 x 1/2” Cotter
NUT, 1/4-20 Hex Top Lock

used on 33” Deck Models
used on 25”, 28” & 30” Decks

used on 33” Deck Models only
used on 33” Deck Models only

Footnotes:
Note: * Belt part numbers are printed on belts.

REAR ENGINE RIDER
SERIES 23

Manual No.
37

7006152

TP 400-5003-5-RE-N

BELTS, BRAKES, INTERLOCK

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
38

SERIES 23

BELTS, BRAKES, INTERLOCK
Item Part No
37
38
39

7014343
7046782
7032111

Qty
1
1
1

Description

Note

BUSHING, Flange .27 x .35 x .4
SPRING, Rectangular Wire Die, Blue
RESTRICTOR, Belt

Footnotes:
Note: * Belt part numbers are printed on belts.

REAR ENGINE RIDER
SERIES 23

Manual No.
39

7006152

TP 400-5003-5-RE-N

RAILS, LIFT ARMS, CAM LIFT

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
40

SERIES 23

RAILS, LIFT ARMS, CAM LIFT
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37

7091503
7028200
7028728
7091297
7090854
7090122
7034213
7059324
7090483
7032030
7046155
7090289
7046159
7012068
7031855
7046163
7031838
7016122
7090361
7058969
7043848
7073269
7046157
7090324
7046217
7091198
7026420
7012067
7032997
7058041
7090365
7022717
7017847
7090858
7071920
7092051
7091290

Qty
2
2
2
2
1
1
1
1
1
2
1
1
1
2
1
2
1
1
1
1
1
1
1
2
1
3
1
2
1
1
1
1
1
2
2
1
1

Description

Note

HAIR PIN, 3/32 x 1-1/2”
SWIVEL, Adjustable
ADJUSTER, Chain (5/16-18 thread)
NUT, 5/16-24 Hex
NUT, 3/8-24 Hex Nyloc
WASHER, 3/8” Flat SAE
PIVOT, Leveling
WELDMENT, Rear Lift Arm
SCREW, 3/8-24 x 1-3/4” Hex Head Cap, GR 5
WASHER, 13/32 x 1-1/4” Flat
LEVER, Height of Cut
NUT, 3/8-24 Hex Center Lock
SPRING, Lever
RING, Rear Lift Arm (Blue)
GUIDE, Belt
SPRING, Assist
BRACE, Top
ROD, Leveling (3/4-24 thread)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
ASSEMBLY, Clutch Plate
RAIL, Deck Lift, Right Hand
RAIL, Deck Lift, Left Hand
DETENT, Height Adjust
SCREW, 3/8-16 x 1” Hex Washer Self-Tap
SPACER, Detent
SCREW, 3/8-16 x 5/8” Hex Washer Self-Tap
GRIP, Height Adjustment Lever
RING, Front Lift Arm (Red)
ARM, Front Lift
WELDMENT, Front Lift Arm
PIN, 1/8 x 3/4” Cotter
ROD, Deck Support (Front Lift Arm to Front End)
RING, .438 External Retaining
SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
SPACER, Deck Lift
BOLT, #10-24 x 1” Flat Head Square Neck
NUT, #10-24 Hex Nyloc

or 7090223

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
41

7006152

TP 400-5003-5-RE-N

RAILS, LIFT ARMS, CAM LIFT

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
42

SERIES 23

RAILS, LIFT ARMS, CAM LIFT
Item Part No
38
39
40

7032243
7090233
7090391

Qty
1
2
2

Description

Note

ANCHOR
SCREW, 5/16-24 x 3/4” Hex Head Cap, GR 5
WASHER, 5/16” Internal Tooth Lock

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
43

7006152

TP 400-5003-5-RE-N

BLADE STOP PEDALS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
44

SERIES 23

BLADE STOP PEDALS
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13

7073267
7074649
7015448
7015495
7015446
7032030
7091630
7090250
7090289
7091584
7073216
7073217
7091530

Qty
1
1
1
1
1
1
1
2
1
1
1
1
1

Description

Note

FOOT PEDAL, Blade Stop Control
SPRING, Latching (.072 dia.)
SPRING, Pedal
SHOULDER BOLT, 3/8-24 w/Nylon Patch, GR 5
SHOULDER BOLT, 3/8-24 x 9/16”
WASHER, Flat 13/32” ID x 1.25” x 1/8” Thick ZP
NUT, 3/8-24 Hex, GR B
WASHER, 1/2” Flat SAE
NUT, 3/8-24 Hex Center Lock
NUT, 1/4-20 Hex Flange Lock, GR 5
CABLE ASSEMBLY, No Reverse in Mow
CLIP, Cable
BOLT, 1/4-20 x 3/4” Square Neck Carriage, GR 5

replaces 7035669 (.062 dia.)

was 7012063
was 90155

was 91776

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
45

7006152

TP 400-5003-5-RE-N

SPINDLE

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
46

SERIES 23

SPINDLE
Item Part No
1
1
2
3
4
5
6
7
8
9A
9B
10
11
12
13

7054531
7058049
7012491
7013313
7040460
7010817
7044785
7010935
7014407
7037751
7031184
7044782
7090356
7090491
7091939

Qty
1
1
2
2
1
1
1
1
1
1
1
1
1
2
2

Description

Note

ASSEMBLY, Spindle Housing (Incl. items 2 thru 9A & 10 thru 13)
ASSEMBLY, Spindle Housing (Incl. items 2 thru 8 & 9B thru 11)
RING, 1.85” Internal Retaining
BEARING, Spindle
WELDMENT, Spindle Housing
LUBE FITTING, 3/16” Press-In
SPINDLE, Rider (10.327” overall length)
WASHER, .77 x 1.13 x .06 Flat
WASHER, Spindle
HOLDER, Blade
HOLDER, Blade
SPACER, Blade Centering
NUT, 5/8-18 Hex Center Lock Jam
SCREW, 1/2-20 x 1-1/4” Hex Head Cap, GR 5
NUT, 1/2-20 Hex, GR 5 or B

used on 33” deck
used on 28” & 30” decks

used on 33” deck
used on 28” & 30” decks

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
47

7006152

TP 400-5003-5-RE-N

DECALS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
48

SERIES 23

DECALS
Item Part No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
--

7071916
7023982
7023980
7046218
7026831
7046720
7023996
7023997
7022991
7015691
7012358
7029113
7074481
7046440
7101111
7075607
7101109
7101112
7101107
7101108
7101110
--

Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Description

Note

DECAL, SNAPPER
DECAL, OHV (33” Kohler Engine Models)
DECAL, Back-Up Recoil (33” Kohler Engine Models)
DECAL, Height of Cut
DECAL, Danger (CPSC)
DECAL, Chute/Deflector Warning
DECAL, 28 Inch (Hi-Vac)
DECAL, 30 Inch
DECAL, 33 Inch (Hi-Vac)
DECAL, Battery Caution
DECAL, Battery
DECAL, Caution, Fuel (English)
DECAL, No Mow in Reverse
DECAL, Safety Instructions
DECAL, Warning, Safety Panel
DECAL, Service Parts, Domestic
DECAL, Remove Battery
DECAL, Danger, Safety Panel
DECAL, Caution, Fuel
DECAL, Caution, Battery
DECAL, Danger, Deck
DECAL, Patent Numbers

not shown, not a service part

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
49

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (For 9, 11 & 11.5HP Briggs Recoil)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
50

SERIES 23

ELECTRICAL SYSTEMS (For 9, 11 & 11.5HP Briggs Recoil)
Item Part No
1
2
3
4
5
6
7
8
9A
9B
10
11
12

7063064
7028386
7018524
7090880
7015438
7011138
7073714
7012080
7029211
7023354
7017817
7022886
7028607

Qty
1
1
1
1
1
1
1
3
1
1
1
1
1

Description

Note

INTERLOCK MODULE, Briggs
HARNESS (Deck Interlock Wiring)
SWITCH, Deck Interlock (NO)
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
IGNITION KEY, Pair
HARNESS, Ground (Recoil Start)
CABLE TIE, 7”
SWITCH, Seat, Quick Mount (NC)
SWITCH, Seat (NC)
SWITCH, Ignition (2-Pole) (Recoil Start)
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
HARNESS, Operator Presence Control (OPC) Wire

was 28606

used on 11 & 13 HP Engines
used on 11-1/2 HP Engines

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
51

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (For 10, 11, 12, 12.5 & 13HP Briggs)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
52

SERIES 23

ELECTRICAL SYSTEMS (For 10, 11, 12, 12.5 & 13HP Briggs)
Item Part No
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26A
26B

7060753
7075671
7022788
7073715
7016168
7016169
7063064
7028386
7018524
7012444
7019326
7073797
7090880
7015438
7011138
7090539
7022886
7091576
7090053
7027172
7028027
7028607
7091576
7012080
7090372
7014451
7029211
7023354

Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
4
2
2
1
1
1
2
2
1
1
1

Description

Note

KIT, 12 Volt Dry Charge Battery, 220 CCA
SOLENOID, Super-Trombetta
HARNESS, Starter Wiring (Briggs Engines)
HARNESS, Ignition Wiring (Briggs Engines)
HOLDER, Fuse (Includes Fuse)
FUSE, 10 Amp (Not shown)
INTERLOCK MODULE, Briggs
HARNESS (Deck Interlock Wiring)
SWITCH, Deck Interlock (NO)
COVER, Battery Cable
WIRE, Positive (Red, 17” long)
SWITCH, Ignition, 4 Terminal, Indak
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
IGNITION KEY, Pair
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
NUT, 1/4-20 Hex, GR 5 or B
WASHER,1/4” Internal Tooth Lock
SCREW, 1/4-20 x 5/8” Hex Head Cap. GR 5
WIRE, Negative, Black (15” long)
HARNESS, Operator Presence Control (OPC) Wire
NUT, 1/4-20 Hex, GR 5 or B
CABLE TIE, 7”
NUT, 1/4-20 Hex Center Lock, GR 5 or B
CABLE TIE
SWITCH, Seat (NC)
SWITCH, Seat (NC)

replaces 7018817

was 28606

used on 11 & 13HP Engines
used on 12.5 & 13 HP Briggs
only

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
53

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (For 13.5, 15, 16 & 17HP Briggs)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
54

SERIES 23

ELECTRICAL SYSTEMS (For 13.5, 15, 16 & 17HP Briggs)
Item Part No
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

7060753
7075671
7022788
7074406
7016168
7016169
7063064
7028386
7018524
7012444
7019326
7026343
7090880
7015438
7011138
7090539
7022886
7091576
7090053
7027172
7028027
7028675
7091576
7012080
7090372
7014451
7012485
7023354

Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
4
2
2
1
1
4
2
2
1
2
1

Description

Note

KIT, 12 Volt Dry Charge Battery, 220 CCA
SOLENOID, Super-Trombetta
HARNESS, Starter Wiring (Briggs)
HARNESS, Ignition Wiring (Briggs)
HOLDER, Fuse (Includes Fuse)
FUSE, 10 Amp (Not shown)
INTERLOCK MODULE, Briggs & Kohler
HARNESS (Deck Interlock Wiring)
SWITCH, Deck Interlock (NO)
COVER, Battery Cable
WIRE, Positive (Red, 17” long)
SWITCH, Ignition-Afterfire Solenoid
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
IGNITION KEY, Pair
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
NUT, 1/4-20 Hex, GR 5 or B
WASHER,1/4” Internal Tooth Lock
SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5
WIRE, Negative, Black (15” long)
HARNESS, Operator Presence Control (OPC) Wire
NUT, 1/4-20 Hex, GR 5 or B
CABLE TIE, 7”
NUT, 1/4-20 Hex Center Lock, GR 5 or B
CABLE TIE
RETAINER, 1/4” Bolt
SWITCH, Seat (NC)

was 28606

for use with 7075071 seat

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
55

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (For 11 & 13HP Honda)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
56

SERIES 23

ELECTRICAL SYSTEMS (For 11 & 13HP Honda)
Item Part No

Qty

Description

Note

1
2

7060753
--

1
1

KIT, 12 Volt Dry Charge Battery, 220 CCA
SOLENOID (not shown, part of engine)

3
4
5
6
7
8
9
10
11
12
13
14
16
19
20
21
23
24
25

7054589
7074962
7014451
7063064
7028386
7018524
7012444
7023354
7073797
7090880
7015438
7011138
7022886
7027172
7028027
7074963
7012080
7090372
7012485

1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
2
2
2

HARNESS, Starter Wiring (Honda)
HARNESS, Ignition Wiring
CABLE TIE, 3.19” long
INTERLOCK MODULE, Briggs & Kohler
HARNESS (Deck Interlock Wiring)
SWITCH, Deck Interlock (NO)
COVER, Battery Cable
SWITCH, Seat (NC)
SWITCH, Ignition, 4 Terminal, Indak
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
IGNITION KEY, Pair
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
SCREW, 1/4-20 x 5/8” Hex Head Cap. GR 5
WIRE, Negative, Black (15” long)
HARNESS, Operator Presence Control (OPC) Wire
CABLE TIE, 7”
NUT, 1/4-20 Hex Center Lock, GR 5 or B
RETAINER, 1/4” Bolt

No Snapper part number.
Purchase from engine
manufacturer.

was 28606

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
57

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (For 15HP Kohler)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
58

SERIES 23

ELECTRICAL SYSTEMS (For 15HP Kohler)
Item Part No
1
2
3
4
5
-6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27

7060753
7075671
7019321
7074405
7016168
7016169
7063064
7028386
7018524
7012444
7019326
7073797
7090880
7015438
7011138
7090539
7022886
7091576
7090053
7027172
7028027
7028678
7091576
7012080
7090372
7014451
7012485
7029211

Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
1
1
2
2
1
1
1
2
2
1
2
1

Description

Note

KIT, 12 Volt Dry Charge Battery, 220 CCA
SOLENOID, Super-Trombetta
HARNESS, Starter Wiring (Kohler Engines)
HARNESS, Ignition Wiring (15HP Kohler Engines)
HOLDER, Fuse (Includes Fuse)
FUSE, 10 Amp (Not shown)
INTERLOCK MODULE, Briggs & Kohler
HARNESS (Deck Interlock Wiring)
SWITCH, Deck Interlock (NO)
COVER, Battery Cable
WIRE, Positive (Red, 17” long)
SWITCH, Ignition, 4 Terminal, Indak
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
IGNITION KEY, Pair
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
SWITCH, Operator Presence Control (OPC) Traction (NC/NO)
NUT, 1/4-20 Hex, GR 5 or B
WASHER,1/4” Internal Tooth Lock
SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5
WIRE, Negative, Black (15” long)
HARNESS, Operator Presence Control (OPC) Wire
NUT, 1/4-20 Hex, GR 5 or B
CABLE TIE, 7”
NUT, 1/4-20 Hex Center Lock, GR 5 or B
CABLE TIE, 3.19” long
RETAINER, 1/4” Bolt
SWITCH, Seat (NC)

replaces 7018817

was 28606

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
59

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (Briggs Magneto Ground)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
60

SERIES 23

ELECTRICAL SYSTEMS (Briggs Magneto Ground)
Item Part No
--

Qty

--

Description

Note

View shows engine magneto ground connection on throttle plate

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
61

7006152

TP 400-5003-5-RE-N

ELECTRICAL SYSTEMS (Kohler Magneto Ground)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
62

SERIES 23

ELECTRICAL SYSTEMS (Kohler Magneto Ground)
Item Part No
--

Qty

--

Description

Note

View shows engine magneto ground area

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
63

7006152

TP 400-5003-5-RE-N

WIRING SCHEMATIC (9, 11 & 11.5HP Recoil Start Briggs)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
64

SERIES 23

WIRING SCHEMATIC (9, 11 & 11.5HP Recoil Start Briggs)
Item Part No
--

Qty

--

Description

Note

Wiring Schematic incl. harness #'s 7028386, 7073714 & 7028607

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
65

7006152

TP 400-5003-5-RE-N

WIRING SCHEMATIC (10, 11, 12, 12.5 & 13 HP Briggs)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
66

SERIES 23

WIRING SCHEMATIC (10, 11, 12, 12.5 & 13 HP Briggs)
Item Part No
--

Qty

--

Description

Note

Wiring Schematic incl. harness #'s 7022788, 7073715 & 7028607

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
67

7006152

TP 400-5003-5-RE-N

WIRING SCHEMATIC (13.5, 15, 16 & 17 HP Briggs Engines)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
68

SERIES 23

WIRING SCHEMATIC (13.5, 15, 16 & 17 HP Briggs Engines)
Item Part No
--

Qty

--

Description

Note

Wiring Schematic incl. harness #'s 7022788, 7074406, 7028675
& 7015430

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
69

7006152

TP 400-5003-5-RE-N

WIRING SCHEMATIC (11 & 13 HP Honda Engines)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
70

SERIES 23

WIRING SCHEMATIC (11 & 13 HP Honda Engines)
Item Part No
--

Qty

--

Description

Note

Wiring Schematic incl. harness #'s 7054589, 7074962, 7028386
& 7074963

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
71

7006152

TP 400-5003-5-RE-N

WIRING SCHEMATIC (14 & 15 HP Kohler Engines)

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
72

SERIES 23

WIRING SCHEMATIC (14 & 15 HP Kohler Engines)
Item Part No
--

Qty

--

Description

Note

Wiring Schematic incl. harness #'s 7019321, 7074405, 7028386
& 7028678

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
73

7006152

TP 400-5003-5-RE-N

HARDWARE BAGS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
74

SERIES 23

HARDWARE BAGS
Item Part No
--

--

--

7063039
7011024
7013321
7013849
7013862
7023667
7023671
7090372
7091038
7091516
7090296
7090122
7075018
7091714
7023735
7011791
7023354
7090951
7061872
7011024
7013321
7013849
7013862
7023667
7023671
7090372
7091038
7091516
7090296
7090122
7090913
7023191
7028395
7029211
7063292
7023735
7023354

Qty
1
2
2
2
1
1
1
2
4
2
1
2
2
4
2
4
1
2
1
2
1
2
1
1
1
2
2
2
1
1
2
2
2
1
1
2
1

Description

Note

HARDWARE BAG (Incl. the 17 items below)
PLUG, 1/2” Cup Insert
BUSHING, Tie Rod
SPACER, .33 x .63 x .156
ROLL PIN, 1/4 x 1-1/2”
FOAM COVER, Steering Shaft
COVER, Steering Shaft
NUT, 1/4-20 Hex Center Lock, GR 5 or B
BOLT, 5/16-18 x 1/2” Hex Flange Nyloc
PIN, 5/32 x 1” Cotter
PIN, 3/16 x 1” Cotter
WASHER, 3/8” Flat SAE
BRACKET, Seat
BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5
KNOB, Seat Adjusting, 5/16-18 thread
RETAINER, 5/16” Bolt
SWITCH, Seat (NC)
NUT, 5/16-18 Hex Large Flange Center Lock
HARDWARE BAG (Includes the 15 items below)
PLUG, 1/2” Cup Insert
BUSHING, Tie Rod
SPACER, .33 x .63 x .156
ROLL PIN, 1/4 x 1-1/2”
FOAM COVER, Steering Shaft
COVER, Steering Shaft
NUT, 1/4-20 Hex Center Lock, GR 5 or B
BOLT, 5/16-18 x 1/2” Hex Flange Nyloc
PIN, 5/32 x 1” Cotter
PIN, 3/16 x 1” Cotter
WASHER, 3/8” Flat SAE
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
KNOB, Seat Adjusting (5/16-18 thread)
SPACER, Pivot
SEAT SWITCH, Quick Mount (NC)
HARDWARE BAG (Incl. items 1-12 above & the 6 items below)
KNOB, Seat Adjusting, 5/16-18 thread
SWITCH, Seat (NC)

for manual start models

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
75

7006152

TP 400-5003-5-RE-N

HARDWARE BAGS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
76

SERIES 23

HARDWARE BAGS
Item Part No

--

7075018
7091714
7011791
7090951
7061093
7017176
7017328
7022325
7090001
7090188
7090392
7090492
7090509
7090559

Qty
2
4
4
2
1
1
1
1
3
3
2
3
2
2

Description

Note

BRACKET, Seat
BOLT, 5/16-18 x 1” Square Neck Carriage, GR 5
RETAINER, 5/16” Bolt
NUT, 5/16-18 Hex Large Flange Center Lock
HARDWARE BAG (Incl. the 9 items below)
DECAL, Recycling Speeds
DECAL, Height of Recycling Cut
DECAL, Cut Height
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
WASHER, 5/16” Flat
SCREW, 1/2-20 x 1” Hex Head Cap, GR 5
WING NUT, 5/16-18
WASHER, 1/2” Internal Tooth Lock
NUT, 1/2-20 Hex Jam

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
77

7006152

TP 400-5003-5-RE-N

ACCESSORIES & ATTACHMENTS

Manual No.

7006152

TP 400-5003-5-RE-N

REAR ENGINE RIDER
78

SERIES 23

ACCESSORIES & ATTACHMENTS
Item Part No

Description

Note

7060325

KIT, Drive Disc Puller

used on All RER Aluminum
Drive Discs

7060697
1692125
7061400
7060794
7060941
7060942
7060943
7060944
7063281
7061414
7060945
7063125
7060947
7060948

KIT, Dump Cart
KIT, Dump Cart (10 Cu. Ft.)
KIT, Gage Wheel (28” & 33”)
KIT, Gage Wheel (41” & 42”)
KIT, Single Bag Catcher (25”)
KIT, Single Bag Catcher (26” & 30”)
KIT, Single Bag Catcher (28” & 33”)
KIT, Single Bag Catcher (41” & 42”)
KIT, Twin Bag Catcher (28” & 33”)
KIT, Twin Bag Catcher (European 28” & 33”)
KIT, Twin Bag Catcher (41” & 42”)
KIT, Clamshell Bagger (28” & 33”)
KIT, Bag-N-Wagon (28” & 33”)
KIT, 28” Thatcherizer

7060964
7072416

KIT, Wagon Cover (28” & 33”)
KIT, Front Weight

7060959
7060653
7060049
7061823

KIT, 36” Dozer Blade
KIT, Tire Chains (16 x 6.50-8 Tires)
KIT, Tire Chains (16 x 4.50-8 Tires)
KIT, Ninja Recycling Cover (25”)

7061049

KIT, Recycling Cover (25”)

7061253
7061254
7061255
7061987
7061915

KIT, Ninja Recycling Cover (28”)
KIT, Ninja Recycling Cover (30”)
KIT, Ninja Recycling Cover (33”)
KIT, Ninja Recycling Cover (41” & 42”)
KIT, 24” x 36” Tow Behind Poly Lawn Roller

Qty

used on All series 7 & Newer
Models
used on All series 7 & Newer
Models

includes 7029143 (25” Ninja
blade)
includes 7016967 (25” mulching
blade)

Footnotes:

REAR ENGINE RIDER
SERIES 23

Manual No.
79

7006152

TP 400-5003-5-RE-N

Parts Manual for

REAR ENGINE RIDER
SERIES 23

IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS
PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.
WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION
TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED

McDonough, GA, 30253 U.S.A.

Briggs & Startton Yard Power Products Group
Copyright © 2007
Briggs & Startton Corporation
Milwaukee, WI USA. All Rights Reserved

Manual No.
Revision 5,

8/24/2007

7006152

TP 400-5003-5-RE-N



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 82
Page Layout                     : SinglePage
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1137f44f-af8b-4d03-aaa4-dd0130f1ace0
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:08:24 15:56:37-04:00
Create Date                     : 2007:08:24 14:18:17-04:00
Metadata Date                   : 2007:08:24 15:56:37-04:00
Document ID                     : uuid:b2ac6287-fbba-455b-a5da-a591cd006b41
Format                          : application/pdf
Title                           : PartsManual
Creator                         : 200316
Author                          : 200316

EXIF Metadata provided by EXIF.tools