Snom technology M9HS2 DECT VOIP PHONE User Manual qsg m9 113 indd

Snom technology AG DECT VOIP PHONE qsg m9 113 indd

Contents

Users Manual

Wall Mounting - Wandmontage - Fixation murale - Montaje en pared - Montaggio a parete - Montagem na paredeDistance to wallAbstand zur WandDistance au murDistanza dalla pareteDistancia a la pared Distância à parede∼ 6 mm (0.236")ø max 8 mm(0.315")ø max 5 mm(0.197")2 x Not included in delivery: Nicht im Lieferumfang enthalten: Non inclus: No incluidos:Non inclusos:Não incluído:123 mmqsg_m9_113.indd 2 02.11.2011 09:58:58
3english.................................................................................... 5 Safety Information & Warranty USA ..................... 23 Safety Information & Warranty Australia ..................... 37 Safety Information & Warranty New Zealand ............ 41deutsch.................................................................................... 45français.................................................................................... 65italiano.................................................................................... 85español.................................................................................... 105appendix · anhang · annexe · apendice · anexoGNU General Public Licence ............................................................ 124Distance to wallAbstand zur WandDistance au murDistanza dalla pareteDistancia a la pared Distância à parede∼ 6 mm (0.236")ø max 8 mm(0.315")ø max 5 mm(0.197")qsg_m9_113.indd 3 02.11.2011 09:58:58
4snom m9 Quick Start GuideENGLISHqsg_m9_113.indd 4 02.11.2011 09:58:58
5snom m9 Quick Start Guide ENGLISH This is the Quick Start Guide to the installation, setup, and operation of the base station and the phone. For further information please refer to the manual at http://wiki.snom.com.deliVerY contentComplete SetHandset Kit1. Base station 1 x -2. Base station power adapter (5 V, DC plug inner Ø 2.1 mm, outer Ø 5.5 mm)1 x -3. Network cable 1 x -4. Handset 1 x 1 x5. 3.7 V Lithium-Ion rechargeable battery pack1 x 1 x6. Handset charger 1 x 1 x7. Handset charger power adapter (5.9 V, DC plug inner Ø 1.35 mm, outer Ø 3.5 mm)1 x 1 x8. Belt clip 1 x 1 xYou will also need:Data received from your service provider or administrator:1. Account (usually the phone number) (required)2. Registrar (required)3. Password, authentication name, outbound proxy (may be required, mailbox account (if available)4. If DHCP is not available for automatic initialization, you will also need the IP address, the IP gateway and the DNS server. Press > (Settings menu) > Network > enter PIN > select IP Gateway and DNS Server, respectively, with OK.qsg_m9_113.indd 5 02.11.2011 09:58:58
6snom m9 Quick Start GuideENGLISHcopYright, tradeMarKs, gpl, legal disclaiMers© 2011 snom technology Aktiengesellschaft All Rights Reserved.snom, the names of snom products, and snom logos are trademarks owned by snom technology AG. All other product names and names of enterprises are the property of their respective owners. snom technology AG reserves the right to revise and change this document at any time, without being obliged to announce such revisions or changes beforehand or after the fact.Texts, images, and illustrations and their arrangement in this document are subject to the protection of copyrights and other legal rights worldwide. Their use, reproduction, and transmittal to third parties without express written permission may result in legal proceedings in the criminal courts as well as civil courts. When this document is made available on snom’s web page, snom technology AG gives its permission to download and print copies of its content for the intended purpose of using it as a manual. No parts of this document may be altered, modified or used for commercial purposes without the express written consent of snom technology AG. Although due care has been taken in the compilation and presentation of the information in this document, the data upon which it is based may have changed in the meantime. snom therefore disclaims all warranties and liability for the accurateness, completeness, and currentness of the information published, except in the case of intention or gross negligence on the part of snom or where liability arises due to binding legal provisions.Our firmware includes some source code that may be used and modified by anyone and everyone under the GNU Public License (GPL) (see Appendix on page 124), provided they, in turn, make it available to everyone else with the same licensing agreement. Please go to http://www.snom.com/en/support/download/gpl-quellcode/ for the original GPL license and the source code of components licensed under GPL and used in snom products.qsg_m9_113.indd 6 02.11.2011 09:58:58
7snom m9 Quick Start Guide ENGLISHStandards ConformanceThis phone is CE and FCC-certified and meets European and US health, safety, and environmental standards. Unauthorized opening, changing, or modifying the phone will cause the warranty to lapse and may also result in the lapse of the CE and FCC certifications. In case of malfunction contact authorized service personnel, your seller, or snom.Base ID: YDBM9BS1Handset ID: YDBM9HS2qsg_m9_113.indd 7 02.11.2011 09:58:59
8snom m9 Quick Start GuideENGLISHsafetY precautionsPlease read these precautions and the instructions on how to set up and use the base and the phone thoroughly before using the devices. Save this Quick Start Guide and do not give the device to third parties without it. See also separate general safety information and country-specific safety and warranty information for the USA, Australia, and New Zealand. Power supplies/adapters, rechargeable battery• Use only the power converters (AC/DC adapters) delivered with the base station and the phone or those power supplies expressly recommended by snom. Other power power supplies may damage or even destroy the device(s).Elementech Power Adapters, Model No.Base station Handset charger Europe without UK AU1050507e AU1050607eUK AU1050505b AU1050605bUSA & Canada AU1050507u AU1050607uAustralia AU1050505s AU1050605s• Use only the rechargable battery pack delivered with the handset or those rechargable battery packs expressly recommended by snom.Placement of base, charger, cables, cords• Avoid placing the devices' cables and cords where people may trip over them. Avoid placing the cables and cords where they may be exposed to mechanical pressure as this may damage them. If the power supply cord or the plug is damaged, disconnect the device and contact qualified service personnel.• Base station, chargers, handsets, power adapters, and cables are for indoor installation with a temperature range between +5°C and +45°C. Not for outdoor installation!• Do not install product in rooms with high humidity (for example, in bathrooms, laundry rooms, damp basements). Do not immerse product in water and do not spill or pour liquids of any kind onto or into any parts of it.• Do not install product in surroundings at risk for explosions and do not use the handset in such surroundings (paint shops, for example). qsg_m9_113.indd 8 02.11.2011 09:58:59
9snom m9 Quick Start Guide ENGLISHDo not use the phone if you smell gas or other potentially explosive fumes!• Medical devices might be adversely affected. Please consider the technical ramifications when installing the devices in a doctor's office, for example.• FOR THE USA: Do not use near medical equipment or if you have a pacemaker.If you have an implanted pacemaker• FOR THE USA: Do not use if you have a pacemaker.• Do not use if you have an implanted pacemaker unless the pacemaker manufacturer's directions expressly permit the use of devices emitting pulsating radio frequency signals. Always follow the manufacturer's directions! • Recommended MINIMUM distance to the handset: 20 cm (7.9").• Do not carry the handset in a breast pocket.• Hold the handset to the ear opposite the medical device to minimize the potential for interference.• Turn the handset off immediately if there is any reason to suspect that interference is taking place.Other health risks Do not hold the loudspeaker at the back of the handset against your ear when the phone is ringing or when speakerphone is switched on. Danger of serious, irreversible damage to your hearing!If you are wearing a hearing aidPlease note that the handset may cause an annoying background noise. additional safetY inforMationSmall children:Your device and its enhancements may contain small parts. Keep them out of the reach of small children.Operating environment:Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating qsg_m9_113.indd 9 02.11.2011 09:58:59
10snom m9 Quick Start GuideENGLISHpositions. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.Medical devicesOperation of any equipment emitting radio frequency signals may interfere with the functionality of inadequately shielded medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any other questions concerning this topic. Switch off your device in health care facilities when signs posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Implanted medical devicesManufacturers of medical devices recommend that a minimum distance of 20 centimeters (7.8 inches) should be maintained between a wireless device and an implanted medical device, such as pacemakers or cardioverter defibrillators, to avoid potential interference with the medical device. Persons who have such devices should: • Always keep the wireless device more than 20 centimeters (7.8 inches) from the medical device when the wireless device is turned on.• Not carry the wireless device in a breast pocket.• Hold the wireless device to the ear opposite the medical device to minimize the potential for inter-ference.• Turn the wireless device off immediately if there is any reason to suspect that interference is taking place.• Read and follow the directions of the medical device‘s manufacturer.If you have any questions about using your wireless device with an implanted medical device, consult your health care provider.qsg_m9_113.indd 10 02.11.2011 09:58:59
11snom m9 Quick Start Guide ENGLISHSELV (Safety Extra Low Voltage) ComplianceSafety status of Input/Output connections comply to SELV requirements.Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use RJ-45 (8P8C) connectors. Use caution when connecting cables.Potentially explosive environmentsSwitch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refuelling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas, and areas where the air contains chemicals or particles such as grain, dust, or metal powders.Sensitive Electronic EquipmentThe current state of research concludes that operational DECT phones normally do not adversely affect electronic equipment. Nevertheless, you should take some precautions if you want to operate DECT phones in the immediate vicinity of such equipment like sensitive laboratory equipment. Always keep a minimum distance of 10 cm (3.94") to the equipment even when the phone is in standby.Electrical SurgesWe recommend the installment of an AC surge arrester in the AC outlet to which this device is connected to avoid damage to the equipmen t caused by local strikes of lightening or other electrical surges.qsg_m9_113.indd 11 02.11.2011 09:58:59
12snom m9 Quick Start GuideENGLISHiMportant BatterY inforMationThis product uses a rechargeable Lithium-Ion battery 3.7V, 650mAh. Only use batteries with “snom” brand and P/N: 60020438 or 60020438 that came with the handset or replacement batteries approved by snom technology AG. Do not use any other type of battery, since this may lead to leakage, fire, explosion, or other dangerous situations. In order to replace or remove the battery, you must first remove the battery cover of the handset. Never disassemble, alter, or short-circuit batteries or use them for purposes other than the intended one. Charge battery only within the snom m9 handset placed in the snom m9 charger that came with the product.Charging and discharging, storageThe handset is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.The battery can be charged and discharged hundreds of times, but it will eventually wear out. Use only snom technology AG approved batteries.If left unused, a fully charged battery will lose its charge over time. If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display.Use the battery only for its intended purpose. Do not short-circuit the battery. Short-circuiting the terminals may damage the battery or the connecting object. Do NOT use a damaged charger or battery. Using a damaged battery may cause it to explode.Do not place or store the battery, inside or outside the handset, in the immediate vicinity of open fire or other heat sources. Leaving the battery in hot or cold places will reduce its capacity and lifetime. Charge batteries within an ambient temperature range of 0° C to 40° C (32° F to 104° F). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Avoid overcharging. Repeated overcharging can lead to deterioration in battery performance. Never attempt charging the battery with reversed polarity as this may cause the gas pressure inside the battery to rise and lead to leakages. For short-term storage store batteries in a dry location with low humidity, no corrosive gases, and at a temperature range of -20° qsg_m9_113.indd 12 02.11.2011 09:58:59
13snom m9 Quick Start Guide ENGLISHC to 45° C (-4° F to 113° F). Long-term storage: Store at a temperature ranges between +10° C and +30° C (50° F to 86° F).Battery DisposalDefective or exhausted batteries should never be disposed of as municipal waste. Return old batteries to the battery supplier, a licensed battery dealer or a designated collection facility. Do not incinerate batteries.cleaningUse an anti-static cloth. Please avoid water and liquid or solid cleaning products as they might damage the surface or internal electronics of the base, charger, and handset.disposalDisposal of phoneThis product is subject to European Directive 2002/96/EC and may not be disposed of with general household garbage.If you do not know where you may dispose of the device at the end of its lifespan, contact your municipality, your local waste management provider, or your seller.Battery disposalThis battery is subject to European Directive 2006/66/EC and may not be disposed of with general household garbage.If you do not know where you may dispose of the battery at the end of its lifespan, contact your municipality, your local waste management provider, or your seller. For countries outside the European Union:Disposal of electrical and electronic products in countries outside the European Union should be done in line with local regulations. Please contact local authorities for further information.qsg_m9_113.indd 13 02.11.2011 09:59:01
14snom m9 Quick Start GuideENGLISHinstallationBefore first use, the handset battery should be charged fully. This will take approximately 8 hours. preparation of handset 1. Lift off the battery cover. 2. Insert the battery pack with the electrodes in the top left corner. Replace the cover.3. Connect the 5.9 V power supply of the charger to the wall outlet first, then to the charger, and place the handset in the charger. 3.1. 2.snom rechargeableLithium-Ionbattery Base stationPower LED – lit when onCall LED – flashes during firmware update – lit when call in progress – blinks slowly when waiting for handset registrationsRegistration LED – lit when the base station is registeredNetwork LED – flashes during boot, indicating that the base station has received an IP addressqsg_m9_113.indd 14 02.11.2011 09:59:05
15snom m9 Quick Start Guide ENGLISH1. When the handset is ready for use, connect one end of the network cable with the NET port on the back of the base station and the other end to a LAN port in your network (switch, router, etc.).2. Connect the 5 V power converter to the wall outlet first, THEN to the base station.NETRESET 5V DCNET5V DCPower connectorReset buttonNet port3. The power indicator comes on and the base station begins to boot. 4. When the base station has booted up, the "Call" LED will start to blink, indicating that the base station is waiting for handset registration.handset oVerVieWSide viewBelt clipVolume adjust key+-Adjust volume• of ringer when call is ringing• of speaker when in callHeadset jack connector 2.5 mmSpeakerphone key (on/off)Back view LoudspeakerofspeakerphoneBattery coverqsg_m9_113.indd 15 02.11.2011 09:59:09
16snom m9 Quick Start GuideENGLISH Front viewNavigation key In idle mode, press top/bottom/right/left edge (depicted in this guide by ///, respectively) or the button in the center () to open the following menus or functions:Main menuDirectoryIntercomSettings menuPreferences menuIn other contexts press  or  to navigate in menus and lists.Green phone keyAccept callsDial numberConfirm actionsLeft function keyIn idle mode: Call listsRight function keyIn idle mode: RSS FeedRed phone keyTerminate callsCancel actionsPower on/offEarpieceColor displayAlphanumerical keypadR keyLock/unlock keypadStar keyChange input mode (numbers, small/ capital letters)qsg_m9_113.indd 16 02.11.2011 09:59:10
17snom m9 Quick Start Guide ENGLISH displaY laYout, idle screenBattery charging statusRed=criticalYellow=under 50%Green=over 50%PreferencesMenuSelect RSS feedsFunction key linewith context-sensitive symbolsTime and DateHandset ID:Call lists:MissedReceivedDialledSignal strength: High=green Low=gray Status lineHandset registration1. Press (red phone key). The display will show: "Searching for Base". Once the handset has found the base station, it will display the PIN prompt.2. Enter the default PIN "0000".3. Press "OK".Note: If the handset fails to register automatically, a manual registration can also be performed. Press "->" to enter the Settings menu. Enter the Handset menu and press "Register Handset". Select "Base 1". Enter PIN and press "OK" to register the handset.4. Once the handset has registered with the base, the idle screen will be displayed: qsg_m9_113.indd 17 02.11.2011 09:59:11
18snom m9 Quick Start GuideENGLISHConfiguration of a VoIP account1. Press  and  on the navigation key and "OK" to show the --Network-- page under Settings > System Info. The IP address of the base station is displayed on the screen. Write it down.2. Press  on the navigation key (see page 16) to show --Handset-- page. Write down the Handset ID, for example: 00FEA101C0 (without the "h" at the end, if visible).3. Open a browser window, type http://<IP address> in the address bar, and press ENTER to open the base station's web interface. Default user name: admin Default password: password4. Click on "Identity 1" in the menu on the left.5. Enter the SIP account information you received from your system administrator or VoIP provider. The display name is freely selectable.6. Click on the "Handsets" tab. Select the handset ID from the "Handset ID (IPUI)" drop-down list. Press "Save". 7. Your snom m9 is now ready for use.phone Menus1. Press center of navigation key to open top-level menu.Settings Name of marked menu itemCurrent function of function key underneathDirectoryPreferencesAlarm ClockOffice ToolsIntercomqsg_m9_113.indd 18 02.11.2011 09:59:12
19snom m9 Quick Start Guide ENGLISH2. Press top/bottom/right/left edge of navigation key (indicated in this guide by ) to navigate on display.3. Press function key "OK" to open submenu/function. Press function key "Cancel" to return to idle screen.directorY Use  to select existing entry or <New Item>. New item: Follow the prompts to enter name and number and select ringer. Press OK.Press (green phone key) to dial number, press to Ieave directory.office toolsStopwatch, Calculator, Notepad, Calendar, RSS Reader, Voicemailsettings MenuNetworkVoIPDisplay NameAccountPasswordMailboxRegistrarOutbound ProxyDate/Time HandsetTime ZoneTime ServerFormatDate FormatTime FormatVLANDHCPRegister handsetSelect baseDeregister handsetReset handsetFW UpdateVersionResetbaseChange PINSystem InfoNew PIN:IP address, MAC address, firmware version, IDs of base and handsetqsg_m9_113.indd 19 02.11.2011 09:59:13
20snom m9 Quick Start GuideENGLISHpreferences Menu“OK” > Select language with  and press“OK” LanguageSelect with  and press “OK” Auto AnswerDisplayScreen SaverWallpaperContrastBacklightIncoming calls are not announcedDNDSelect event when calls are to be forwarded and press“OK” Select target phone number for forwarding calls and press “OK” AudioSettingsRinger SettingsInternal* callsExternal callsKey TonesCharging TonesLow BatteryMWIConfirma-tion ToneAdvisory Tones Select ringto-ne and volume with  and press “OK” Select “Activate” with  and press “OK” * Internal calls: From handsets registered at the same base station AlwaysCall ForwardNeverWhen busyTimeout/sec.Fwd. targetalarM clocKActivate | Time | Alarm RingerintercoMPage All | Handset: Page all handsets or selected handset registered with same base stationphone operationMake and answer callsMake a call: Enter number > press OK or Answer a call: Press Terminate call: Press qsg_m9_113.indd 20 02.11.2011 09:59:14
21snom m9 Quick Start Guide ENGLISHRedialPress > select number > press or "OK"Call forwardingPreferences > Call forwarding > enter PIN > OK > select identity > select event (always, busy, timeout) > select SIP address > enter target phone number > press OK > on prompt press Yes to reboot phoneTurn off call forwarding: Preferences > Call forwarding > enter PIN > OK > select identity > select event "never"Hold and resumeHold call: Press Options > HoldUnhold call: Press Options > UnholdTransfer callWith call on line, press Options > Transfer > enter number > press OKMiscellaneousLook up MAC address (= serial number) of base stationPress  and  on the navigation key and "OK" (Menu Settings > System Info > Network)Look up IP address of base stationPress  and  on the navigation key and "OK" (Menu Settings > System Info > Network)Open web interface of base stationEnter IP address in address bar of your web browser, press ENTERReset base stationMenu "Settings" > Handset > Reset base > "OK"ORPress "Reset" key on the back of the base station.Reset handsetMenu "Settings" > Handset > Reset handset > "OK"qsg_m9_113.indd 21 02.11.2011 09:59:14
22snom m9 Quick Start GuideENGLISHqsg_m9_113.indd 22 02.11.2011 09:59:14
23snom m9 Quick Start Guide ENGLISH safetY inforMation & WarrantY usaIntended UseThis telephone is designed for telephoning within the Internet. Any other use is considered unintended use. Any modification or reconstruction not described in the user manual is considered unintended use.IMPORTANT SAFETY INFORMATIONFollow all instructions and warnings in the user manual, and on the equip-ment to prevent accidents.WARNINGFire, electric shock, or other injury may result if you do not observe the following safety precautions:• Do not use in or near a bathtub, sink, swimming pool, wet basement, or other water.• Do not use this or any cordless telephone in the vicinity of a gas leak.• Do not use in environments subject to explosion hazards, such as auto paint shops.• Do not use near medical equipment or if you have a pacemaker.• Unplug from wall outlet before cleaning.• To prevent overheating, do not block slots and openings in the cabinet or the back or bottom of equipment. Do not place equipment on beds, sofas, rugs, or other surfaces that generate fibers.• To prevent overheating, do not place near or over a radiator or in a cabinet without properventilation.• To reduce the risk of fire, use only 26 AWG or larger UL-listed or CSA-certified telecommunication line cord.• Operate using the power source indicated on the marking label. If you are unsure about the type of power supply to your home or business, consult your power company.• Do not place objects on the power cord. Do not step on the power cord.qsg_m9_113.indd 23 02.11.2011 09:59:14
24snom m9 Quick Start GuideENGLISH• To prevent exposure to dangerous voltage, do not push objects through cabinet slots.• To reduce the risk of electric shock, do not disassemble equipment or open parts other than specified access doors. Opening or removing parts may expose you to dangerous voltage or other risks. Incorrect reassembly can cause electric shock when equipment is subsequently used.• Do not overload wall outlets and extension cords.• Unplug equipment and contact qualified service if any of the following has occurred:1. Power supply cord or plug has been damaged or frayed.2. Liquid has been spilled on or in the equipment.3. Equipment has been exposed to rain or water.4. Equipment does not work normally even when the operating instructions are followed. Adjust only those controls referred to in the operating instructions. Improper adjustment of other controls may result in damage and may require extensive work by an authorized service center.5. Equipment has been dropped and damaged.6. Equipment has exhibited a distinct change in performance.• Do not put the handset of the telephone next to your ear when the handset is not in normal talk mode.• Radio signals transmitted between the handset and base may cause interference with hearing aids.WARNINGThe cords contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after hand-ling.CAUTIONTo comply with the FCC’s RF exposure guidelines, place the base unit at least 8 inches from persons.Do not clean with liquid or aerosol cleaners, household polish, chemicals, or cleaning agents. To avoid static shock, do not clean with a dry cloth. qsg_m9_113.indd 24 02.11.2011 09:59:14
25snom m9 Quick Start Guide ENGLISHClean with only a damp (not wet) cloth.NOTICETo avoid damage to the equipment, observe the following precautions:• Do not expose to water, rain, or moisture.• Place securely on a stable surface.• To avoid damage during an electrical storm, equipment should be plugged into a surge protector.BatterY safetY precautionsWARNINGThe snom m9 contains a Li-ion battery. WARNINGFire or injury may result if you do not observe the following safety precau-tions:• Use only the Li-ion battery pack (3.7V, 650mAh) specified in the owner’s manual.• Do not use other batteries or conventional alkaline batteries.• To avoid explosion, do not dispose of battery pack in a fire.• Review battery package insert for disposal instructions. Li-ion battery must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods.• Do not open or mutilate battery pack. Released electrolyte is corrosive and may damage eyes and skin and may be toxic if swallowed.• Battery may overheat and cause burns if placed into contact with conducting materials such as rings, bracelets, and keys.CAUTION• Charge battery pack only in accordance with the instructions and limitations specified in the user manual.• Observe proper polarity orientation between battery pack and battery charger.qsg_m9_113.indd 25 02.11.2011 09:59:14
26snom m9 Quick Start GuideENGLISH• Remove battery pack if storing phone for more than 30 days.• Disconnect and remove batteries before shipment. Any batteries transported with the equipment must be separately secured and cushioned with any exposed terminals covered to prevent breakage, leakage, movement within packaging, or short circuits. Failure to follow recommendations may be against U.S. Department of Transportation (DOT), International Civil Aviation Administration (ICAO), International Air Transport Association (IATA), or International Maritime Organization (IMO) regulations.• Rechargeable Li-ion Battery Must Be Recycled or Disposed of Properly. At the end of its useful life, under various state and local laws it may be illegal to dispose of a battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal.• Please call 1-800-8BATTERY for information on how to recycle the battery.installation guidelines1. Follow all warnings and instructions.2. Do not install equipment near a bath tub, sink, or shower.3. Operate the equipment using only the power source indicated on the marking label. If you are unsure of the power supply to your home or business, consult with your power company.4. To avoid interference to nearby appliances, do not place base of the phone on or near a television, VCR, or microwave oven.5. Do not expose the equipment to direct sunlight.6. Do not place equipment on an unstable cart, stand, or table.7. Adjust only those controls referred to in the operating instructions. Improper adjustment of other controls may result in damage and may require extensive work to restore equipment to normal operation.8. The equipment may get warm when batteries are being charged. To avoid damage, it is recommended that the product not be placed on antique or veneered wood.9. The location of the base unit of the phone should be close to a phone jack, a personal computer, and a continuous power outlet (an AC outlet that does not have a switch to interrupt power).qsg_m9_113.indd 26 02.11.2011 09:59:14
27snom m9 Quick Start Guide ENGLISH10. Keep base and handset away from sources of electrical noise such as motors or fluorescent lighting.fcc and other inforMationThis equipment complies with Parts 68 of the FCC rules and the requi-rements adopted by the Administrative Council for Terminal Attachments (ACTA).This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of com-munications may not be ensured when using this phone.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a parti-cular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet or on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TVtechnician for help.FCC RF exposure warningTo insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depen-ding on their intended usage. This product has been tested and found to comply with the FCC’s exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the accesso-ries supplied or designed for this product. Use of other accessories may qsg_m9_113.indd 27 02.11.2011 09:59:14
28snom m9 Quick Start GuideENGLISHnot ensure compliance with FCC RF exposure guidelines and should be avoided.Caution: To maintain compliance with the FCC’s RF exposure guidelines, the internal antennas used for this mobile transmitter (Base unit) must pro-vide a separation distance of at least 20 cm from all persons. Base and Handset must not be co-located or operating in conjunction with any other antenna or transmitter.Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device. Hearing aid compatibilityThis equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.Health and safety information FCCExposure to Radio Frequency (RF) SignalsYour wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio fre-quency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on the safety standards previously set by both U.S. and international standards bodies:This EUT has been shown to be capable of compliance for localized speci-fic absorption rate (SAR) for uncontrolled environment/general population exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC/OET Bulletin 65 Supplement C (2001) and IEEE Std. 1528-2003 De-cember 2003).The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure stan-dard forwireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC and Canada is 1.6W/kg averaged over one gram of tissue. The standard qsg_m9_113.indd 28 02.11.2011 09:59:14
29snom m9 Quick Start Guide ENGLISHincorporates a substantial margin of safety to give additional protection for the public and to account for any variations in.RF exposure FCCTests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power le-vel in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while ope-ration can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are per-formed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. Body-worn measurements may differ among phone models, depending upon available accessories and FCC requirements. The highest SAR value for this phone when tested for use at the ear is 0.0291 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.For body worn operation, to maintain compliance with FCC RF exposure guidelines, use only accessories that contain no metallic components and provide a separation distance of 15mm (0.6 inches) to the body. Use of other accessories may violate FCC RF exposure guidelines and should be avoided.CORDLESS TELEPHONE PRIVACYCordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telepho-ne unit. Consequently, any communications using your cordless telephone may not be private.qsg_m9_113.indd 29 02.11.2011 11:24:21
30snom m9 Quick Start GuideENGLISHprograMMing and testing of eMergencY nuMBersIf this product has memory dialing locations, you may choose to store poli-ce, fire department and emergency medical service telephone numbers in these locations. If you do, please keep three things in mind:1. It is recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn’t work.2. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.3. Testing the emergency telephone numbers you have stored is not recommended. However, if you do make a call to an emergency number:4. You must remain on the line and briefly explain the reason for the call before hanging up.5. Programming/testing of emergency numbers should be performed during off-peak hours, such as in the early morning or late evening, when the emergency services tend to be less busy.Emergency calling service(i.e., 911, 112, 999, etc.) with VoIP typically functions the same as that of traditional phone service companies. However, you are strongly advised to consult your VoIP provider to ensure that emergency service via VoIP is available in your area. In addition, you will likely be asked to register your physical address with your VoIP service provider to ensure that an emergency response team is able to locate the origin of the emergency call. Also note that it may take several days for the registration of your address to take effect.In order to better ensure your safety, please be aware of certain circumstances in which emergency calling service may be either unavailable or limited in comparison to traditional emergency calling services.During an electrical power outage, an internet service outage, or a service disruption due to non-payment, your emergency calling service may not function properly.qsg_m9_113.indd 30 02.11.2011 09:59:14
31snom m9 Quick Start Guide ENGLISHIf at any point in time your broadband phone or adapter fails, emergency calling service may not function properly.The relocation of your base station to a physical address other than that provided upon signup, or the use of a number outside your normal area code or exchange may cause incorrect emergency calling information to be provided to your local emergency response center.Please contact your VoIP service provider for more information.one Year liMited WarrantYSNOM TECHNOLOGY AG, (“snom”) extends the following limited war-ranty for its product. snom’s warranty obligations are limited tothe specific terms set forth below:One Year Limited Warranty. snom warrants to the original retail purchaser (“you”) that the product will be free from defects in materials and workmanship for a period of one (1) year from the date of your original purchase (the “Warranty Period”), sub-ject to specific exclusions, identified below.What Are The Limits Of snom’s Obligations And Liabilities under this Warranty? EXCEPT FOR THE EXPRESS LIMITED WARRANTY SNOM HAS PRO-VIDED ABOVE, YOU TAKE THE PRODUCT “AS IS.” SNOM MAKES NO OTHER WARRANTY OR REPRESENTATION CONCERNING THE PRO-DUCT, AND EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF WHATEVER KIND OR NATURE, INCLUDING BUT NOT LIMITED TO ANY AND ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WAR-RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IF SNOM CANNOT LAWFULLY DISCLAIM OR EXCLUDE IMPLIED WARRANTIES UNDER APPLICABLE LAW, THEN TO THE MA-XIMUM EXTENT POSSIBLE THE DURATION OF SUCH IMPLIED WAR-RANTIES SHALL EXPIRE ON EXPIRATIONOF THE WARRANTY PERIOD. THE REMEDIES SET OUT BELOW ARE YOUR EXCLUSIVE REMEDIES, AND SNOM SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND, INCLUDING (i) INCIDENTAL, qsg_m9_113.indd 31 02.11.2011 09:59:14
32snom m9 Quick Start GuideENGLISHSPECIAL, PUNITIVE, CONSEQUENTIAL, AND SIMILAR DAMAGES, (ii) ANY LOSS OF ANTICIPATED PROFITS OR BENEFITS, (iii) DAMAGES ARISING FROMANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SNOM, ITS AGENTS OR EMPLOYEES, OR (iv) ANY OTHER DAMAGE, INCLUDING DAMAGE RESULTING (a) FROM THE PURCHASE, USE, OR MISUSE OF THE PRODUCT, (b) FROM ANY INABILITY TO USE THE PRODUCT OR OTHER ASSOCIATED EQUIPMENT, (c) FROM LOSS OF DATA OR DATA CONFIDENTIALITY ASSOCIATED WITH THE PRODUCT, OR (d) FROM THE COST OF SUBSTITUTE EQUIPMENT. Some States do not allow limitations on how long an implied warranty lasts, and do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.What specifically does this Warranty include, and what does it exclude? This limited warranty covers all materials and all workmanship embodied in the product, with the exception of damage or defects in (i) the product’s battery, (ii) the product’s antenna, (iii) data stored on the product that may be lost or corrupted, or (iv) cosmetic damage to the product, that does not affect the product’s functionality (the “Excluded Items”). snom will not provide warranty service for Excluded Items.This Limited Warranty also does not apply to hardware or software pro-ducts that do not bear the “snom” brand, even if these non-snom products are packaged or sold with the product. Please review documentation for these non-snom products, as they may be covered by their own, separate warranties.Who enjoys the product Warranty?snom extends this warranty only to you, the original retail purchaser of the product. If you transfer ownership of the product to someone else, the limitations set out above will continue to apply, but snom will not provide warranty service to the new owner of the product.What will snom do If the product presents a defect?If a defect arises and you submit a valid claim to snom within the War-ranty Period, then snom, at its option, will either (1) repair the product at no charge, using new or refurbished replacement parts, (2) exchange the qsg_m9_113.indd 32 02.11.2011 09:59:14
33snom m9 Quick Start Guide ENGLISHproduct with a product that is new (or that has been manufactured from new or serviceable used parts) and that is at least functionally equivalent to your original product, or (3) refund to you the purchase price of your product.Will this Warranty apply to replacement parts?If snom repairs or replaces your product, snom warrants the replacement products or parts against defects in materials and workmanship for that period of time (a) commencing on the date of the replacement or repair and (b) ending either ninety (90) days thereafter or on the expiration date of the Warranty Period on the original product, whichever provides you with longer warranty coverage. When snom replaces a product or part, the replacement item becomes your property, while the replaced item be-comes snom’s property. When a refund is given, your product becomes snom’s property.What steps should be taken to obtain Warranty service? If, after following the instructions in the user’s manual you are certain that the Product is defective, please take the following steps:1. Contact snom at the number below (during the hours listed) to receive a Return Merchandise Authorization number (RMA Number).2. Disconnect the battery from the product.3. Pack the product carefully (preferably in its original packaging), and separately secure the battery in its own separate packaging within the shipping carton.4. Include in your shipping carton all parts, accessories, manuals, and other materials originally packaged with the product.5. Include in the shipping carton a copy of the original sales receipt or other evidence of the date of original purchase.6. Include in the shipping carton a note (i) that describes the defect that has caused you to return the product, and (ii) that includes a day-time phone number where you can be reached.7. Clearly write the RMA Number you received on the outside of the shipping carton.8. At you option, either insure the shipment to snom, or accept the risk if the product is lost or damaged in shipment.qsg_m9_113.indd 33 02.11.2011 09:59:15
34snom m9 Quick Start GuideENGLISH9. Ship the carton containing the materials you have collected, freight prepaid and by traceable means, to snom Certified Partner.What about data stored on my product? snom is not responsible for lost or corrupted data. Before you replace parts or return your snom product for warranty service, make sure to retain a copy of any data stored on the device. You should also remove any confi-dential or sensitive information stored on the product. This Limited Warran-ty does not cover the recovery, safeguarding, or reinstallation of programs, data, ringtones, or other information you may store on your product.If the Product is Damaged through Misuse, Will the Warranty Still Ap-ply? snom’s Limited Warranty does not apply to damage that is caused: (a) by accident, abuse, misuse, or misapplication of the product; (b) by product installation or programming that does not comply with instruc-tions provided in the owner’s manual; (c) by service performed by anyone other than an authorized snom service center (acting in the course fulfilling obligations under this Limited Warranty); (d) by use in conjunction with equipment, parts, conversion kits, subassemblies, or systems not manu-factured by, or not approved in writing by snom; or (d) where the product’s warranty/quality stickers, product serial numbers, identification plates, or electronic serial numbers have been removed, altered or rendered illegible.Does this Warranty apply outside the United States? This warranty is void outside the United States of America and Puerto Rico.Effect of Warranty. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.No modifications. No snom reseller, agent, or employee is authorized to make any modifica-tion, extension, or addition to this Limited Warranty. If you receive retailer advertising, statements, or other information that conflicts with this Limited Warranty, whether oral or written, you should not rely on such statements.qsg_m9_113.indd 34 02.11.2011 10:04:43
35snom m9 Quick Start Guide ENGLISHConnection between product pricing and Limited Warranty. This Limited Warranty allocates risk of product failure between snom and you, and snom’s pricing of the product reflects this allocation of risk and the limitations of liability contained in this Limited Warranty.Effect of headings.snom has provided bolded headings in the provisions of this Limited War-ranty for convenience only, and these headings shall have no legal effect. qsg_m9_113.indd 35 02.11.2011 10:04:43
36snom m9 Quick Start GuideENGLISHqsg_m9_113.indd 36 02.11.2011 09:59:15
37snom m9 Quick Start Guide ENGLISH safetY inforMation & WarrantY australiaIntended UseThis telephone is designed for telephoning within the Internet. Any other use is considered unintended use. Unauthorised modifications or reconstruction not described in this manual are not permitted.SAFETY INFORMATIONGeneral• Only use the power supply included with the product. Using an unauthorised power supply will invalidate the product guarantee and may damage the telephone.• For the snom m9 use only the Li-ion battery pack specified in the owner’s manual (3.7V, 650mAh). Never use other batteries or conventional alkaline batteries.• Even when the key lock is switched on, it is still possible to make emergency calls (see instructions for details).• Do not open the handset (other than to change batteries) or base station. This could expose you to high voltages or other risks.• Radio signals transmitted between the handset and base may cause interference with hearing aids.• This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.• Do not install the base in bathrooms or shower rooms. The handset and base are not watertight.• Do not use the telephone in environments subject to explosion hazard (e.g. auto paint shops).Cleaning• Clean the handset and base station with a damp (not wet) cloth or an anti-static wipe.• Never use household polish, as this will damage the product.• Never use a dry cloth as this may cause a static shock.qsg_m9_113.indd 37 02.11.2011 09:59:15
38snom m9 Quick Start GuideENGLISHEnvironmental• Do not expose the product to direct sunlight.• The product may heat up when the batteries are being charged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.• Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surface.• Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.• Do not expose your product to fire, explosive or other hazardous conditions.• There is a slight chance that your product could be damaged by a thunder storm. We recommend that you unplug the power and telephone line cord and switch off your computer during a thunder storm.liMited WarrantYThis limited warranty (hereinafter the Warranty) is valid for the products snom m9 base station and cordless snom m9 handset and original accessories thereof (hereinafter the Product). The Warranty is valid only in the country in which the product was originally purchased.• The Warranty covers only manufacturing defects, and only insofar as the Product has been used and stored in accordance with the instructions set out in the user guide.• The Warranty is issued by the retailer from whom the Product was originally purchased to the end purchaser of the Product (hereinafter the Customer).• In accordance with the Warranty, the Customer has a sole claim to demand that the Product be repaired/replaced and may not in accordance with the provisions of the Warranty assert further claims against the manufacturer/retailer for indirect loss, including but not limited to loss of data or loss of profit.• The warranty period runs for 12 months from the day on which the Customer originally purchased the Product from a retailer. Subsequent changes of ownership do not extend the warranty period.qsg_m9_113.indd 38 02.11.2011 09:59:15
39snom m9 Quick Start Guide ENGLISH• The Warranty is valid solely on the condition that the Product is taken to a retailer within the warranty period. In the event of a fault or defect in the Product, it must be taken to a retailer in the country in which the Product was purchased. Products are repaired or exchanged at the retailer’s own discretion. The warranty period is not extended for a repaired or replaced Product. Exchanged parts are the property of the retailer/manufacturer.• The Warranty is valid solely on the condition that the original proof of purchase issued to the original purchaser is presented with the Product.The Warranty is not valid• if the Product has been opened or repair attempted by a person other than a retailer,• if the fault with the Product is due to general wear, incorrect use or storage, including use or storage not conforming to the instructions set out in the user guide or faults caused by poor maintenance of the Product,• if the fault is the result of the Product not being used for its intended purpose,• if the fault is due to external causes such as but not limited to rough handling or misadventure,• if the fault is caused by the use of accessories or other peripheral units which are not original accessories intended for use with the Product,• if the fault is due to a break in the network or power supply,• if the fault is due to the fact that the battery has short circuited or has been forced open or an attempt made to modify it, or the battery has been used in equipment other than for which it is intended,• if the software in the Product needs to be upgraded due to changes in the network. In addition to his statutory rights and those set out above, the Customer has no other basis for a claim.Amendments or additions to the Warranty are only valid with the written consent of the retailer.qsg_m9_113.indd 39 02.11.2011 09:59:15
40snom m9 Quick Start GuideENGLISHWARNING• Warning – This telephone will not operate during loss of mains power.• Warning – Due to possibility of ignition hazard this telephone must be switched off in areas of potentially explosive atmospheres, such as chemical/fuel storage areas or blasting operations.• Warning – Only use an A-tick approved headset with this device.qsg_m9_113.indd 40 02.11.2011 09:59:15
41snom m9 Quick Start Guide ENGLISH safetY inforMation & WarrantY neW ZealandIntended UseThis telephone is designed for telephoning within the Internet. Any other use is considered unintended use. Unauthorised modifications or reconstruction not described in this manual are not permitted.SAFETY INFORMATIONGeneral• Only use the power supply included with the product. Using an unauthorised power supply will invalidate the product guarantee and may damage the telephone.• For the snom m9 use only the Li-ion battery pack specified in the owner’s manual (3.7V, 650mAh). Never use other batteries or conventional alkaline batteries.• Even when the key lock is switched on, it is still possible to make emergency calls (see instructions for details).• Do not open the handset (other than to change batteries) or base station. This could expose you to high voltages or other risks.• Radio signals transmitted between the handset and base may cause interference with hearing aids.• This product should not be used near emergency/intensive care medical equipment and should not be used by people with pacemakers.• Do not install the base in bathrooms or shower rooms. The handset and base are not watertight.• Do not use the telephone in environments subject to explosion hazard (e.g. auto paint shops).Cleaning• Clean the handset and base station with a damp (not wet) cloth or an anti-static wipe.• Never use household polish, as this will damage the product.• Never use a dry cloth as this may cause a static shock.qsg_m9_113.indd 41 02.11.2011 09:59:15
42snom m9 Quick Start GuideENGLISHEnvironmental• Do not expose the product to direct sunlight.• The product may heat up when the batteries are being charged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.• Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surface.• Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.• Do not expose your product to fire, explosive or other hazardous conditions.• There is a slight chance that your product could be damaged by a thunder storm. We recommend that you unplug the power and telephone line cord and switch off your computer during a thunder storm.liMited WarrantYThis limited warranty (hereinafter the Warranty) is valid for the products snom m9 base station and cordless snom m9 handset and original accessories thereof (hereinafter the Product). The Warranty is valid only in the country in which the product was originally purchased.• The Warranty covers only manufacturing defects, and only insofar as the Product has been used and stored in accordance with the instructions set out in the user guide.• The Warranty is issued by the retailer from whom the Product was originally purchased to the end purchaser of the Product (hereinafter the Customer).• In accordance with the Warranty, the Customer has a sole claim to demand that the Product be repaired/replaced and may not in accordance with the provisions of the Warranty assert further claims against the manufacturer/retailer for indirect loss, including but not limited to loss of data or loss of profit.• The warranty period runs for 24 months from the day on which the Customer originally purchased the Product from a retailer. Subsequent changes of ownership do not extend the warranty period.qsg_m9_113.indd 42 02.11.2011 09:59:15
43snom m9 Quick Start GuideDEUTSCH• The Warranty is valid solely on the condition that the Product is taken to a retailer within the warranty period. In the event of a fault or defect in the Product, it must be taken to a retailer in the country in which the Product was purchased. Products are repaired or exchanged at the retailer’s own discretion. The warranty period is not extended for a repaired or replaced Product. Exchanged parts are the property of the retailer/manufacturer.• The Warranty is valid solely on the condition that the original proof of purchase issued to the original purchaser is presented with the Product.The Warranty is not valid• if the Product has been opened or repair attempted by a person other than a retailer,• if the fault with the Product is due to general wear, incorrect use or storage, including use or storage not conforming to the instructions set out in the user guide or faults caused by poor maintenance of the Product,• if the fault is the result of the Product not being used for its intended purpose,• if the fault is due to external causes such as but not limited to rough handling or misadventure,• if the fault is caused by the use of accessories or other peripheral units which are not original accessories intended for use with the Product,• if the fault is due to a break in the network or power supply,• if the fault is due to the fact that the battery has short circuited or has been forced open or an attempt made to modify it, or the battery has been used in equipment other than for which it is intended,• if the software in the Product needs to be upgraded due to changes in the network. In addition to his statutory rights and those set out above, the Customer has no other basis for a claim.Amendments or additions to the Warranty are only valid with the written consent of the retailer.qsg_m9_113.indd 43 02.11.2011 09:59:15
44snom m9 Quick Start GuideDEUTSCHqsg_m9_113.indd 44 02.11.2011 09:59:15
45snom m9 Quick Start GuideDEUTSCH Dies ist der Quick Start Guide zur Aufstellung, Einrichtung und Inbetriebnahme der Basistation und des Mobilteils. Weitere Informationen entnehmen Sie bitte der Bedienungsanleitung auf http://wiki.snom.com. lieferuMfangComplete SetHandsetKit1. Basisstation 1 x -2. Netzteil Basisstation (5 V, Ste-cker innerer Ø 2,1 mm, äußerer Ø 5,5 mm)1 x -3. Netzwerkkabel 1 x -4. Mobilteil 1 x 1 x5. Wiederaufladbarer 3,7 V Lithium-Ionen-Akku1 x 1 x6. Mobilteil-Ladeschale 1 x 1 x7. Netzteil für Ladeschale (5,9 V, Stecker innerer Ø 1,35 mm, äußerer Ø 3,5 mm)1 x 1 x8. Gürtelclip 1 x 1 xSie benötigen außerdem:die SIP-Kontoangaben (Anmelde-/Zugangsdaten), die Sie von Ihrem VoIP-Service-Provider oder Ihrem Netzwerk-Administrator erhalten haben:1. Konto (erforderlich) 2. Registrar (erforderlich)3. Kennwort, Authentifizierungs-Name, Outbound Proxy (falls erforderlich), ggfls. Konto des Anrufbeantworters4. Falls kein DHCP zur automatischen Initialisierung zur Verfügung steht, benötigen Sie außerdem IP-Adresse, IP Gateway und DNS-Server. Drücken Sie > (Menü Settings/Einstellungen) > Network/Netzwerk > PIN eingeben > IP Gateway und DNS Server jeweils mit "OK" auswählen.qsg_m9_113.indd 45 02.11.2011 09:59:15
46snom m9 Quick Start GuideDEUTSCHCopyright, Markenrechte, GNU/GPL-Lizenz, Haftung© 2011 snom technology Aktiengesellschaft Alle Rechte vorbehalten. snom sowie die Namen der snom-Produkte und die snom logos sind gesetzlich geschützte Marken der snom technology AG. Alle anderen Produkt- und Firmennamen sind Marken der jeweiligen Inhaber. snom technology AG behält sich jederzeit das Recht auf Überarbeitung und Änderung dieses Dokumentes vor, ohne verpflichtet zu sein, die vorgenommenen Änderungen anzukündigen oder mitzuteilen.Texte, Bilder, Grafiken und deren Anordnung in diesem Dokument unterliegen weltweit dem Schutz des Urheberrechts und anderen Schutzgesetzen. Ihre Verwendung, Reproduktion oder Weitergabe ohne ausdrückliche schriftliche Zustimmung der snom technology AG können sowohl straf- als auch zivilrechtlich verfolgt werden. Insoweit dieses Dokument auf der Webseite der snom technology AG zum Download bereitgestellt wird, erteilt die snom technology AG die Erlaubnis, es für den vorgesehen Zweck der Benutzung als Bedienungsanleitung herunterzuladen und auszudrucken. Kein Teil dieses Dokumentes darf ohne snoms vorherige schriftliche Zustimmung verändert oder für kommerzielle Zwecke verwendet werden.Trotz der angewandten Sorgfalt bei der Zusammenstellung und Präsentation der Informationen in diesem Dokument können sich Daten zwischenzeitlich geändert haben. Daher übernimmt snom keine Gewähr für die Richtigkeit, Vollständigkeit oder Aktualität der zur Verfügung gestellten Informationen. Jegliche Haftung für Schäden ist ausgeschlossen, sofern diese nicht auf Vorsatz oder grober Fahrlässigkeit auf seiten von snom beruhen oder sofern keine Haftung aufgrund zwingender gesetzlicher Bestimmungen eintritt. Unsere Firmware enthält teilweise Quellcodes, die unter der GNU Public License (GPL) (siehe Anhang auf Seite 124) von jedermann genutzt und modifiziert werden dürfen, solange sie wiederum mit denselben Lizenzbedingen zur allgemeinen Nutzung veröffentlicht werden. Die Quellcodes der von snom genutzten und der GPL unterliegenden Komponenten können Sie auf der Supportseite unserer Webseite auf qsg_m9_113.indd 46 02.11.2011 09:59:16
47snom m9 Quick Start GuideDEUTSCHwww.snom.com, den Wortlaut der GPL auf http://www.snom.com/de/support/download/gpl-quellcode/ herunterladen.norMKonforMitÄtDieses Gerät ist CE- und FCC-geprüft und entspricht den geltenden europäischen und US-amerikanischen Richtlinien. Die eigenmächtige Öffnung des Geräts sowie Änderungen und Modifizierungen am Gerät führen zum Erlöschen der Gewährleistungspflicht und können darüberhinaus zum Erlöschen der Zulassung führen. Wenden Sie sich bei Betriebsstörungen oder Defekten an authorisiertes Servicepersonal, an Ihren Verkäufer oder an snom.qsg_m9_113.indd 47 02.11.2011 09:59:16
48snom m9 Quick Start GuideDEUTSCHsicherheitshinWeiseLesen Sie bitte vor Inbetriebnahme die Sicherheitshinweise und diese Anleitung zu Aufstellung und Bedienung des Gerätes. Bewahren Sie diese Anleitung auf und geben Sie das Gerät nicht ohne sie an Dritte weiter. Beachten Sie bitte auch die Hinweise zur Entsorgung von Gerät und Akku. Netzstecker, wiederaufladbarer Akku• Verwenden Sie nur die mitgelieferten Ladeschalen und Netzteile oder ausdrücklich von snom empfohlene Ersatzteile. Die Verwendung anderer Netzteile können das Telefon beschädigen oder gar zerstören.Elementech-Netzteile, Modell Nr.Basisstation Ladegerät des Mobilteils Europa ohne UK AU1050507e AU1050607eUK AU1050505b AU1050605bUSA & Canada AU1050507u AU1050607uAustralia AU1050505s AU1050605s• Verwenden Sie nur den mitgelieferten wiederaufladbaren Akku oder ausdrücklich von snom empfohlene Ersatzakkus.Aufstellung von Basisgerät und Ladeschale(n), Platzierung von Zuleitungen• Vermeiden Sie es, das Netz- und Stromkabel so zu legen, dass Personen darüber stolpern könnten. Vermeiden Sie es, die Kabel so zu legen, dass sie mechanischem Druck ausgesetzt und dadurch beschädigt werden könnte. Falls die Kabel oder die Netzstecker beschädigt sind, trennen Sie das Produkt von der Stromzufuhr und wenden Sie sich an qualifiziertes Servicepersonal.• Mobilteil, die Ladeschale, das Netzteil, das Gateway, das Stromkabel und das Netzwerkkabel sind nur für den Gebrauch in Innenräumen bei Temperaturen zwischen +5°C und +45°C bestimmt. NICHT FÜR DEN AUSSENBETRIEB GEEIGNET!• Stellen Sie das Produkt nicht in Räumen mit hoher Luftfeuchtigkeit wie z.B. Badezimmern, Waschküchen, feuchten Kellerräumen auf. Tauchen Sie das Produkt nicht in Wasser und gießen Sie keine Flüssigkeiten auf oder in das Gerät.qsg_m9_113.indd 48 02.11.2011 09:59:16
49snom m9 Quick Start GuideDEUTSCH• Stellen Sie das Gerät nicht in explosionsgefährdeten Umgebungen (z.B. Lackiereien) auf. Benutzen Sie das Mobilteil nicht, wenn Sie Gas oder andere möglicherweise explosionsgefährliche Dämpfe riechen.• Der Betrieb von DECT-Telefonen kann unter Umständen die Funktionalität von nicht ausreichend abgeschirmten medizinischen Geräten stören. Beachten Sie bitte die technischen Konsequenzen, wenn Sie das Gerät z.B. in einer Arztpraxis installieren möchten.Implantierte medizinische Geräte• Benutzen Sie das snom m9 nur, wenn die Herstelleranweisungen des medizinischen Gerätes ausdrücklich die Benutzung von DECT-Geräten erlaubt.• Siehe auch die zusätzlichen Sicherheitsinweise „Implantierte medizinische Geräte“ auf Seite 50.Andere GesundheitsrisikenHalten Sie den Gehäuselautsprecher auf der Rückseite des Mobilteils nicht an Ihr Ohr, wenn das Telefon läutet oder wenn das Gerät auf Freihand-Lautsprechen geschaltet ist. Es drohen irreversible Gehörschäden!Wenn Sie ein Hörgerät tragenBitte beachten Sie, dass das Mobilteil ein Brummen verursachen kann. ZusÄtZliche sicherheitshinWeiseKleinkinderDas Gerät und sein Zubehör können Kleinteile enthalten. Halten Sie diese außerhalb der Reichweite von kleinen Kindern.BetriebsumgebungVergessen Sie nicht, die in bestimmten Bereichen gültigen besonderen Vorschriften zu beachten und immer dann das Gerät auszuschalten, wenn sein Einsatz verboten ist oder wenn es durch das Gerät zu Störungen kommen oder Gefahr entstehen kann. Halten Sie das Gerät stets in seiner vorgesehenen Bedienungsposition. Bringen Sie keine Kreditkarten oder andere magnetische Datenträger in die Nähe des Geräts, da auf diesen enthaltene Daten hierdurch gelöscht werden können.qsg_m9_113.indd 49 02.11.2011 09:59:16
50snom m9 Quick Start GuideDEUTSCHMedizinische GeräteDer Betrieb von Funkgeräten kann unter Umständen die Funktionalität von nicht ausreichend abgeschirmten medizinischen Geräten stören. Wenden Sie sich an einen Arzt oder den Hersteller des medizinischen Geräts, um festzustellen, ob diese ausreichend gegen externe Hochfrequenzemissio-nen abgeschirmt sind oder wenn Sie Fragen zu anderen Themen haben. Schalten Sie Ihr Gerät in Gesundheitseinrichtungen aus, wenn Sie durch in diesen Bereichen aufgestellte Vorschriften dazu aufgefordert werden. Krankenhäuser oder Gesundheitseinrichtungen können unter Umständen Geräte verwenden, die auf externe Hochfrequenzemissionen sensibel re-agieren können. Implantierte medizinische GeräteHersteller medizinsicher Geräte empfehlen einen Mindestabstand von 20 Zentimeter zwischen Funkgeräten und implantierten medizinischen Geräten wie z. B. Herzschrittmachern oder implantierten Cardiovertern/Defibrillatoren, um eine mögliche Störung des medizinischen Geräts zu vermeiden. Personen, die Geräte dieser Art verwenden,• müssen immer einen Abstand von 20 Zentimetern zwischen medizinischem Gerät und Funkgerät einhalten, wenn das Funkgerät eingeschaltet ist,• dürfen das Funkgerät nicht in der Brusttasche aufbewahren,• müssen das Gerät an das dem medizinischen Gerät entferntere Ohr halten, um die Gefahr möglicher Störungen zu verringern,• müssen ihr Funkgerät umgehend ausschalten, wenn sie Grund zu der Vermutung haben, dass es zu einer Störung gekommen ist,• müssen die Anweisungen des medizinischen Geräteherstellers lesen und befolgen.Wenn Sie Fragen hinsichtlich der Verwendung des Funkgeräts zusammen mit einem implantierten medizinischen Gerät haben, wenden Sie sich an Ihren Arzt.SELV (Safety Extra Low Voltage)-EinhaltungDie Eingangs-/Ausgangsverbindungen halten die SELV-Richtlinien für Kleinspannungsgeräte ein.qsg_m9_113.indd 50 02.11.2011 09:59:16
51snom m9 Quick Start GuideDEUTSCHWarnung: Um elektrische Schläge zu vermeiden, verbinden Sie keine SELV-Geräte mit Geräten, die Telefon-/Netzwerk-Spannung (TNV) führen. Nur an LAN-Ports anschließen! Explosionsgefährdete OrteSchalten Sie Ihr Gerät an Orten mit einer explosionsgefährdeten Atmo-sphäre aus und handeln Sie entsprechend den Schildern und Anweisun-gen. An solchen Orten kann ein Funke eine Explosion auslösen oder einen Brand mit körperlichen Schäden oder Todesfolge auslösen. Schalten Sie das Gerät an Tankstellen und in der Nähe von Benzinpumpen aus. Beach-ten Sie die Einschränkungen in Bezug auf den Einsatz von Funkgeräten in Kraftstoffdepots, -lagern und in Verkaufsbereichen, chemischen Anlagen oder Sprenggebieten. Orte, an denen Explosionsgefahr besteht, sind zwar häufig, aber nicht immer deutlich gekennzeichnet. Hierzu gehören bei-spielsweise das Unterdeck auf Schiffen, Umgebungen von Leitungen und Tanks, in denen sich Chemikalien befinden, Fahrzeuge, die mit Flüssiggas betrieben werden, sowie Orte, an denen sich Chemikalien oder Partikel wie Getreidestaub, Staub oder Metallpulver in der Luft befinden.Empfindliche elektronische GeräteNach dem gegenwärtigen Stand der Forschung beeinträchtigen DECT-Telefone elektronische Geräte nicht. Sie sollten trotzdem Vorsicht walten lassen, wenn Sie DECT-Telefone in unmittelbarer Nähe socher Geräte wie z.B. Laborausrüstungen betreiben wollen. Halten Sie immer, auch im Standby-Betrieb, einen Mindestabstand von 10 cm ein. ÜberspannungsschutzEs wird empfohlen, ein Überspannungsschutzgerät zwischen Steckdose und diesem Gerät zu schalten, um Schäden, die durch Blitzschlag oder andere Arten von Überspannungen entstehen können, zu verhindern.BatterieDiese Produkt verwendet einen wiederaufladbaren Lithium-Ionen Akku 3,7V 650mAh. Es dürfen nur Akkus mit dem Firmenzeichen „snom“ und den P/N: 60020438 oder 60020438 verwendet werden, die dem Set beiliegen, sowie von der snom technology AG freigegebene Ersatztypen. Benutzen Sie keine anderen Akku-Typen, da dies zum Auslaufen, Feuer, qsg_m9_113.indd 51 02.11.2011 09:59:16
52snom m9 Quick Start GuideDEUTSCHExplosion oder zu anderen gefährlichen Situationen führen kann. Zum Er-setzen oder zum Entfernen des Akkus muss die Batterieabdeckung ent-fernt werden. Nehmen Sie den Akku niemals auseinander, nehmen Sie keine Änderungen an ihm vor und schließen Sie ihn nicht kurz. Laden Sie den Akku nur im snom m9 Mobilteil in der snom m9-Ladeschale mit dem mitgelieferten Netzteil auf.Laden und Entladen von Akkus, AufbewahrungEin neuer Akku erreicht seine volle Leistung erst, nachdem er zwei- oder dreimal vollständig ge- und entladen wurde. Der Akku kann mehrere hundert Mal ge- und entladen werden, nutzt sich aber im Laufe der Zeit ab. Verwenden Sie ausschließlich von der snom technology AG freigegebene Akkus.Bei Nichtgebrauch entlädt sich ein voll aufgeladener Akku mit der Zeit. Ist der Akku vollständig entladen, dauert es möglicherweise einige Minuten, bis die Ladeanzeige im Handgerät (Display) einge-blendet wird oder Sie Anrufe tätigen können.Benutzen Sie den Akku nur für den vorgesehenen Zweck. Benutzen Sie keine beschädigten Ladegeräte oder Akkus. Schließen Sie den Akku nicht kurz. Durch Kurzschließen der Pole können der Akku oder der verbindende Gegenstand beschädigt werden. Beschädigte Akkus können explodieren!Bewahren Sie den Akku niemals in unmittelbarer Nähe von Feuer oder anderer Hitzequellen, in praller Sonne usw. auf.Die Kapazität und Lebensdauer des Akkus wird verkürzt, wenn er an kal-ten oder warmen Orten liegen gelassen wird. Laden Sie die Akkus nur in einer Umgebungstemperatur von 0° C bis 40° C. Ein Gerät mit einem kalten oder warmen Akku funktioniert unter Umständen vorübergehend nicht, selbst wenn der Akku vollständig geladen ist. Einfaches und vor al-lem mehrfaches Vermeiden Sie eine Überladung des Akkus, da sie zu einer übermäßigen Alterung führt. Laden Sie niemals den Akku mit verkehrter Polarität, da dies zu Gasbildungen im Inneren des Akkus führen kann, welche wiederrum Leckagen herbeiführen können. Für kurzfristige Lagerungen ist ein Ort mit niedriger Luftfeuchtigkeit und ohne korrosive Gase bei einer Temperatur von -20° C bis 45° C zu wählen.Für langfristige Lagerungen sind Tem-peraturen zwischen 10° C und 30° C einzuhalten. qsg_m9_113.indd 52 02.11.2011 09:59:16
53snom m9 Quick Start GuideDEUTSCHInformationen zur BatterieentsorgungDieser Akku unterliegt der europäischen Richtlinie 2006/66/EG und darf nicht im Hausmüll entsorgt werden. Wenn Sie nicht wissen, wo Sie ihn entsorgen können, wenden Sie sich bitte an Ihre Kommune, Ihren örtlichen Müllentsorger oder Ihren Fachhändler.Werfen oder legen Sie Akkus nicht ins Feuer, da Explosionsgefahr be-steht! reinigungBenutzen Sie ein antistatisches Tuch. Benutzen Sie kein Wasser und keine Reinigungsflüssigkeiten; sie könnten die Oberfläche oder die Elektronik von Basistation, Ladegerät und Mobilteil beschädigen.entsorgungEntsorgung des Gerätes/der GerätekomponentenDieses Gerät unterliegt der europäischen Richtlinie 2002/96/EG und darf nicht im Hausmüll entsorgt werden.Wenn Sie nicht wissen, wo Sie Ihr Altgerät entsorgen können, wenden Sie sich bitte an Ihre Kommune, Ihren örtlichen Müllentsorger oder Ihren Fachhändler.Entsorgung von Batterien/AkkusDer Akku unterliegt der europäischen Richtlinie 2006/66/EG und darf nicht im Hausmüll entsorgt werden.Wenn Sie nicht wissen, wo Sie den Akku entsorgen können, wenden Sie sich bitte an Ihre Kommune, Ihren örtlichen Müllentsorger oder Ihren Fachhändler.qsg_m9_113.indd 53 02.11.2011 09:59:18
54snom m9 Quick Start GuideDEUTSCHinstallationVor der ersten Inbetriebnahme sollte der Akku des Mobilteils vollständig aufgeladen werden. Dauer dieser ersten Aufladung: Ca. 8 Stunden.VorBereitung des MoBilteils3.1. 2.snom rechargeableLithium-Ionbattery 1. Nehmen Sie den Deckel des Batteriefachs ab.2. Legen Sie den Akku ein. Setzen Sie den Deckel ein.3. Verbinden Sie das 5,9 V-Netzteil der Ladeschale zuerst mit der Steckdose, danach mit der Ladeschale. Stellen Sie das Mobilteil in die Ladeschale.Basisstation1. Wenn das Mobilteil aufgeladen ist, verbinden Sie ein Ende des Netzwerkkabels mit dem NET-Port an der Rückseite der Basisstation und das andere Ende mit einem LAN-Port in Ihrem Netzwerk (Switch, Router, usw.).2. Verbinden Sie das 5V-Netzteil zuerst mit der Steckdose, danach mit der Basisstation.NETRESET 5V DCNET5V DCStrom-anschlussNeustart-KnopfNetzwerk-Portqsg_m9_113.indd 54 02.11.2011 09:59:19
55snom m9 Quick Start GuideDEUTSCH3. Die Betriebsanzeige-LED leuchtet auf und die Basisstation beginnt zu booten (hochzufahren).4. Sobald dieser Vorgang beendet ist, beginnt die Anruf-LED zu blinken. Sie wartet jetzt auf die Registrierung des ersten Mobilteils.Betriebsanzeige-LED – Leuchtet, wenn die Basis-station eingeschaltet istAnruf-LED – Blinkt während Firmware-Update – Leuchtet während Gesprächs – Blinkt langsam während des Wartens auf Mobilteil-Regist-rierungRegistrierungs-LED – Leuchtet, sobald die Basisstation regist-riert istNetzwerk-LED – Blinken während des Hochfahrens zeigt, dass die Basisstation eine IP-Adres-se erhalten hatÜBersicht MoBilteilSeitenansichtGürtelclipLautstärketaste +-Änderung der Lautstärke • der Klingel, wenn ein Anruf läutet• des Lautsprecher während eines GesprächsHeadset-Buchse 2,5 mmTaste Gehäuselautsprecher (an/aus)qsg_m9_113.indd 55 02.11.2011 09:59:22
56snom m9 Quick Start GuideDEUTSCHRückseite Lautsprecher Freisprech-einrichtungDeckel des Batteriefachs VorderseiteNavigationtaste Im Ruhemodus drücken Sie jeweils den oberen/unteren/ rechten/linken Rand (in dieser Anleitung dargestellt durch ///) oder den Knopf in der Mitte (), um folgende Menüs/Funktionen zu öffnen:EingangsmenüTelefonbuchIntercomEinstellungenPräferenzenIn anderen Kontexten drücken Sie auf  oder , um in Menüs und Listen zu navigieren.Grüne AnruftasteAnrufe annehmen; Angezeigte Telefon-nummer wählenAktionen bestätigenLinkeFunktionstasteIm Ruhemodus: AnruflistenRechte FuntionstasteIm Ruhemodus: RSS-LeserRote AnruftasteAnruf beendenlAktion abbrechen;Gerät ein/ausAlfanumerische TastaturSterntasteEingabemodus ändern (Ziffern, Groß-/KleinbuchstabenR-TasteTastatur sperren/entsperrenHörmuschelFarbdisplayqsg_m9_113.indd 56 02.11.2011 09:59:23
57snom m9 Quick Start GuideDEUTSCH displaY-laYout, ruhedisplaYBatterie-Ladezustand:Rot=kritischGelb=unter 50%Grün=über 50%MenüPräferenzenRSS-LeserFunktionstasten-zeile mit kontext-sensitiven SymbolenZeit und DatumVoIP-Konto:Anruflisten:VerpasstAngenommenGewähltSignalstärke: Hoch=grün Niedrig=grau Statuszeile registrierung des MoBilteils1. Drücken Sie (rote Anruftaste). Das Display zeigt den Text: "Suche Basisstation". Sobald das Mobilteil die Basisstation gefunden hat, erscheint der Text "PIN" auf dem Display.2. Geben Sie die werkseitige Standard-PIN "0000" ein. 3. Drücken Sie "OK".Hinweis: Falls die automatische Registrierung des Mobil-teils fehlschlägt, können Sie es auch manuell registrieren. Drücken Sie "->", um das Menü "Einstellungen" zu öffnen. Wählen Sie mit der Navigationstaste "Mobilteil" , dann "Mo-bilteil registrieren". Wählen Sie "Basis 1" aus. Geben Sie die PIN ein und drücken Sie auf die Funktionstaste unter "OK", um das Mobilteil an der Basisstation zu registrieren.4. Sobald das Mobilteil registriert ist, sehen Sie den Ruhebildschirm auf dem Display: qsg_m9_113.indd 57 02.11.2011 09:59:24
58snom m9 Quick Start GuideDEUTSCHKonfigurierung eines Voip-Kontos1. Drücken Sie  und  auf der Navigationstaste und "OK", um die Seite --Network-- anzuzeigen. Dort finden Sie die IP-Adresse der Basisstation. Schreiben Sie sie auf.2. Drücken Sie auf die obere Kante  der Navigationstaste, um --Handset-- anzuzeigen und schreiben Sie die Handset ID auf, z.B. 00FEA101C0 (ohne das "h" am Ende, falls angezeigt).3. Öffnen Sie auf Ihrem PC den Browser, geben Sie in der Adresszeile http://<IP address> ein und drücken Sie die ENTER-Taste, um das Web-Interface der Basisstation zu öffnen. Username (Benutzername) (Voreinstellung): admin Password (Kennwort) (Voreinstellung): password4. Klicken Sie im linken Menü auf "Identity 1".5. Geben Sie die SIP-Kontoangaben, die Sie von Ihrem Systemadministrator oder Ihrem VoIP-Provider erhalten haben, ein:Account = KontoPassword = KennwortAuthentication Name = AuthentifizierungsnameMailbox = Konto des Anrufbeantworters Display name = Frei wählbare/r Name/Nummer zur Anzeige auf dem Display 6. Klicken Sie auf die Karteikarte "Handsets": 7. Wählen Sie aus dem Aufklappmenü von "Mobilteil-ID (IPUI)" die ID-Nummer des Mobilteils aus. Klicken Sie auf "Speichern".8. Ihr snom m9 ist jetzt betriebsbereit.qsg_m9_113.indd 58 02.11.2011 09:59:25
59snom m9 Quick Start GuideDEUTSCHtelefonMenÜs1. Drücken Sie auf die Mitte der Navigationstaste, um das Eingangsmenü zu öffnen.Einstellungen Name des markierten MenüeintragsDerzeitige Funktion der darunterliegenden TasteTelefonbuchPräferenzenWeckerBürowerkzeugeIntercom2. Drücken Sie den oberen/unteren/rechten/linken Rand der Navigationstaste (in dieser Anleitung durch  dargestellt), um auf dem Display zu navigieren.3. Drücken Sie die Funktionstaste unter "OK", um Untermenüs zu öffnen oder Funktion einzuleiten. Drücken Sie die Funktionstaste unter "Abbr", um zum Ruhebildschirm zurückzukehren.telefonBuchWählen Sie mit  einen bestehenden Eintrag oder <Neuer Eintrag> aus. Neuer Eintrag: Geben Sie bei Aufforderung Name und Telefonnummer ein und wählen Sie den Klingelton aus. Drücken Sie auf "OK".Drücken Sie auf , um die Nummer des Eintrags zu wählen, drücken Sie auf (rote Anruftaste), um das Telefonbuch zu schließen.BÜroWerKZeugeStoppuhr, Taschenrechner, Notizen, Kalender, RSS-Leser, Anruf-beantworter abhörenqsg_m9_113.indd 59 02.11.2011 09:59:26
60snom m9 Quick Start GuideDEUTSCHMenÜ einstellungenVLANDatum/Zeit Netz MobilteilZeitzoneZeitserverFormatFormat DatumFormat ZeitDHCPMobilteil registrierenBasis auswählenMobilteil de-registrierenZurücks.MobilteilFW-UpdateVersionZurücks. BasisVoIPAngez.NameKontoKennwortAnruf-beantworterRegistrarOutbound ProxyPIN ändernNeue PIN:System- infoIP-Adresse, MAC-Adresse, Firmware-Version, Identifikationen von Basis + MobilteilintercoMAlle anrufen: Alle an der Basisstation registrierten Mobilteile werden gleichzeitig angerufenMobilteil-Nr.: Das ausgewählte Mobilteil wird angerufenWecKerAktivieren | Zeit | Weckertöneqsg_m9_113.indd 60 02.11.2011 09:59:27
61snom m9 Quick Start GuideDEUTSCHMenÜ prÄferenZen“OK” > Mit  gewünschte Sprache markieren > “OK” SpracheMit  mar-kieren und “OK” drückenAutom.AnnahmeDisplayScreen-saverWallpaperKontrastBeleuch-tungEingehende Anrufe klingeln nichtNicht störenBedingung auswählen, wann umge-leitet werden soll > “OK” drückenUmleitungsziel (Telefonnummer) eingeben > “OK” drückenAudio-Einstell.Klingel-einstellungInterne* AnrufeExterne AnrufeTasten-klickAkku-TonBatterie fast leerNeue NachrichtBestäti-gungstonHinweis-töneKlingelton + Lautstärke mit  aus-wählen und “OK” drückenMit  “Aktivieren” aus-wählen > “OK” drücken* Interne Anrufe: Von anderen, an derselben Basisstation registrierten Mobilteilen ImmerAnrufum-leitungNieBei BesetztNach Zeit/Sek.Umlei-tungszielqsg_m9_113.indd 61 02.11.2011 09:59:28
62snom m9 Quick Start GuideDEUTSCHtelefonieren Mit ihreM M9Anrufe tätigen und annehmenAnrufen: Nummer eingeben > "OK" oder drückenAnruf annehmen: drückenAnruf beenden: drückenErneut wählen drücken > Nummer auswählen > oder "OK" drückenAnrufumleitungMenü Präferenzen öffnen > Anrufumleitung > PIN eingeben > mit "OK" bestätigen > Identität auswählen > Umleitungsanlass auswählen (immer, bei Besetzt, nach Zeit/Sek.) > SIP-Adresse auswählen > Telefonnummer des Umleitungsziels eingeben > "OK" drücken > wenn Frage nach Neustart auf Display erscheint: Mit "Ja" bestätigenAnrufumleitung ausschalten: Präferenzen > Anrufumleitung > PIN eingeben > mit "OK" bestätigen > Identität auswählen > Umleitungsanlass "Nie" auswählen Halten und WiederaufnehmenAnruf auf Halten setzen: "Optionen" drücken > HaltenWiederaufnehmen: "Optionen" drücken > AufnehmenAnruf weiterleiten (durchstellen)Drücken Sie während des Gesprächs auf "Optionen" > Transfer > Nummer eingeben > "OK" drückenAnrufbeantworter abhörenMenü Bürowerkzeuge > VoiceMailqsg_m9_113.indd 62 02.11.2011 09:59:28
63snom m9 Quick Start GuideDEUTSCHVerschiedenesMAC-Adresse (= Seriennummer) der Basisstation findenDrücken Sie  und  auf der Navigationstaste und "OK" (Menü Einstellungen > Systeminfo > Netz)IP-Adresse der Basisstation findenDrücken Sie  und  auf der Navigationstaste und "OK" (Menü Einstellungen > Systeminfo > Netz)Web-Interface der Basisstation öffnenIP-Adresse in die Adresszeile im Browser Ihres PCs eingeben und ENTER drückenNeustart der BasisstationMenü "Einstellungen" > Mobilteil > Neustart Basis > "OK"ODERTaste "Reset" an der Rückseite der Basisstation drückenNeustart MobilteilMenü "Einstellungen" > Mobilteil > Neustart Mobilteil. > "OK"qsg_m9_113.indd 63 02.11.2011 09:59:28
64snom m9 Quick Start GuideFRANÇAISqsg_m9_113.indd 64 02.11.2011 09:59:28
65snom m9 Quick Start GuideFRANÇAIS Ceci est le Quick Start Guide (manuel abrégé) pour l'installation, l'initialisation et la mise en service de votre station de base et vos combinés. Consultez le manuel sur notre site web pour des informations complémentaires: http://wiki.snom.com. contenu de la BoîteComplete SetHandset Kit1. Station de base 1 x -2. Alimentation station de base (5 V, connecteur Ø intérieur 2,1 mm, Ø extérieur 5,5 mm)1 x -3. Câble de réseau 1 x -4. Combiné 1 x 1 x5. Batterie rechargeable, 3,7 V Lithium-Ion1 x 1 x6. Chargeur pour le combiné 1 x 1 x7. Alimentation pour le chargeur (5,9 V, connecteur Ø intérieur 1,35 mm, Ø extérieur 3,5 mm)1 x 1 x8. BeltClip (fixation ceinture) 1 x 1 xVous devez également disposer desdonnées du compte SIP (abonnement, accès, login) que vous avez reçu de votre administrateur réseau ou de votre fournisseur de VoIP:1. Nom d'utilisateur (normalement le numero de téléphone) (si requis)2. L'adresse IP du Registrar (requis)3. Mot de passe, authentification du nom d'utilisateur, Outbound Proxy (si requis), compte de la messagerie vocale (si applicable)4. S'il n'est pas possible d'utiliser DHCP pour l'initialisation automatique, vous avez également besoin des données de l'adresse IP, de la Passerelle IP et du Serveur DNS. Pour les saisir, appuyez sur > Paramètres > Réseau > saisir PIN > sélectionner Passerelle IP et Serveur DNS l'un après l'autre avec "OK" > saisir les données.qsg_m9_113.indd 65 02.11.2011 09:59:28
66snom m9 Quick Start GuideFRANÇAISCopyright, Marques Déposées, GPL, Non Responsabilitée© 2011 snom technology Aktiengesellschaft Tous droits réservés. snom, les noms des produits snom et les logos snom sont des marques déposées par snom technology AG. Tous les autres noms de produits et noms d'entreprises sont les propriétés de leurs détenteurs respectifs.snom technology AG se réserve le droit de modifier et de changer ce document à n'importe quel moment, sans devoir annoncer de telles modifications ou changements avant ou après leur mise en place.Les textes, images et illustrations ainsi que leur mise en page dans ce document sont protégés par les copyrights et autres dispositions légales internationales. Leur utilisation, leur reproduction et leur transmission à des parties tierces sans accord express écrit peut induire des poursuites devant les cours criminelles et civiles. Lorsque ce document est mis à disposition sur la page web de snom, snom technology AG autorise le téléchargement et l'impression de copies de son contenu pour qu'il puisse être utilisé comme manuel. Aucune partie de ce document ne peut être altérée, modifiée ou utilisée dans un but commercial sans l'autorisation écrite de snom technology AG.Bien que le plus grand soin ait été apporté à la compilation et à la présentation des informations contenues dans ce document, les données sur lesquelles elles sont basées peuvent entre-temps avoir été modifiées. snom doit donc décliner toute garantie et toute responsabilité quand à l'exactitude et à l'exhaustivité des informations publiées excepté en cas de négligence flagrante de la part de snom ainsi que des les cas ou la responsabilité de snom est engagée de par la loi. Notre firmware inclus des éléments de code source qui peuvent être utilisés et modifié par quiconque selon les termes des licences GPL (cf. page 124), à condition qu'à leurs tours ils les rendent disponibles selon les mêmes termes. Veuillez vous rendre sur http://www.snom.com/de/support/download/gpl-quellcode/ pour consulter la licence GPL originelle et le code source des composants couverts par la licence GPL qui sont utilisé dans les produits snom. qsg_m9_113.indd 66 02.11.2011 09:59:28
67snom m9 Quick Start GuideFRANÇAISconforMitÉ au standardsCe téléphone est certifié CE et FCC et répond aux standards environnementaux, de sécurité et de santé européens et américains.L'ouverture, la modification ou le remplacement sans autorisation du téléphone annule la garantie et peut également annuler les certifications CE et FCC. En cas de mauvais fonctionnement, veuillez contacter le personnel d'entretien agrée, votre revendeur ou bien snom.ID de la base: YDBM9BS1ID du combiné: YDBM9HS2instructions sÉcuritÉVeuillez lire l'ensemble de ces instructions et des instructions sur la façon de régler et d'utiliser la station d'accueil et le téléphone avant d'utiliser les appareils. Conservez ce Guide de Démarrage Rapide et ne cédez pas l'appareil à une tierce partie sans ce guide. Consultez également les informations générales sur la sécurité et les informations sur la sécurité et la garantie spécifiques aux USA, à l'Australie et à la Nouvelle-Zélande. Alimentations/adaptateurs, batterie rechargeable• N'utilisez que les convertisseurs de puissance (adaptateurs secteur) fournis avec la station d'accueil et le téléphone ou les alimentations spécifiquement recommandées par snom. Les autres alimentations électriques risquent d'endommager ou même de détruire les appareils.Elementech-Netzteile, Modell No.Station de base Chargeur du combiné Europa sans UK AU1050507e AU1050607eUK AU1050505b AU1050605bUSA & Canada AU1050507u AU1050607uAustralia AU1050505s AU1050605s• Utilisez uniquement l'accumulateur fourni avec le combiné ou bien les accumulateurs expressément recommandés par snom.qsg_m9_113.indd 67 02.11.2011 09:59:28
68snom m9 Quick Start GuideFRANÇAISMise en place de la station de base, du chargeur, des câbles et cordons• Evitez de disposer les câbles et cordons des appareils là où il est possible de trébucher dessus. Evitez également de disposer ces câbles et cordons dans des lieux exposés à des pressions mécaniques pour ne pas risquer de les endommager. Si le cordon d'alimentation ou la fiche est endommagé, déconnectez l'appareil et contactez un service d'entretien qualifié.• La station de base, les chargeurs, combinés, adaptateurs et la connectique sont destinés à une utilisation en intérieur à des températures comprises entre +5°C et +45°C. NE PAS INSTALLER EN EXTERIEURS!• N'installez pas les équipements dans des pièces très humides (par exemple dans des salles de bain, des buanderies, ou des sous-sols humides). N'immergez pas l'appareil dans l'eau et ne reversez pas de liquides dessus, ni sur aucun de ses éléments.• N'installez pas l'appareil dans un environnement potentiellement exposé à des explosions et n'utilisez pas le combiné dans un tel environnement (par exemple dans un atelier de peinture). N'utilisez pas le téléphone si vous percevez une odeur de gaz ou d'autres émanations potentiellement explosives.• Les équipements médicaux peuvent être perturbés par les téléphones DECT. Veuillez tenir compte des conséquences techniques lorsque vous installez l'appareil dans le cabinet d'un docteur ou un endroit similaire.Si vous portez un stimulateur cardiaque• Ne pas utiliser si vous portez un stimulateur cardiaque à moins que les recommandations du fabriquant du stimulateur permettent expressément l'utilisation d'équipements émettant des signaux radio à pulsations. Suivez toujours les recommandations du constructeur.• Cf. les instructions supplementaires " Equipements médicaux implantés" à la page 69.Autres risques pour la santéNe tenez pas le haut-parleur situé au dos du combiné contre votre oreille lorsque le téléphone est en train de sonner ou lorsque le mode haut-parleur est activé. Il y a un risque de dommages irréversibles pour votre audition!qsg_m9_113.indd 68 02.11.2011 09:59:28
69snom m9 Quick Start GuideFRANÇAISSi vous portez une aide auditiveVeuillez noter que le combiné peut occasionner un bruit de fond gênant inforMations sÉcuritÉ supplÉMentairesJeunes enfantsVotre appareil et ses extensions peuvent contenir de petits éléments. Con-servez-les hors de portée des enfants.Environnement d'utilisationN'oubliez pas de suivre toutes les réglementations locales particulières et éteignez toujours votre appareil lorsque son utilisation est interdite ou su-sceptible de provoquer des interférences ou un danger. N'utilisez l'appareil que dans sa configuration de fonctionnement normale. Ne placez pas de cartes de crédit magnétiques ou d'autres supports de stockages à proxi-mité de l'appareil. Les informations se trouvant dessus risqueraient d'être effacées.Equipements médicauxL'utilisation de tout équipement générant des signaux radio peut interfé-rer avec le fonctionnement d'équipements médicaux insuffisamment pro-tégés. Consultez un docteur ou le constructeur de l'équipement médical afin de déterminer si un équipement est suffisamment protégé des ondes radio externes ou si vous avez d'autres questions à ce sujet. Eteignez votre appareil dans les centres de soins lorsque les signes affichés vous de-mandent de le faire. Les hôpitaux et les centres de soin sont susceptibles d'utiliser des équipements sensibles aux ondes radio externes. Equipements médicaux implantésLes fabricants d'équipements médicaux recommandent de maintenir une distance minimale de 20 centimètres entre un appareil sans fil et un équipement médical implanté comme un stimulateur cardiaque ou un défibrillateur – cardioverter pour éviter d'éventuelles interférences avec l'équipement médical. Les personnes portant de tels appareils doiven:• toujours maintenir l'appareil sans fil à plus de 20 centimètres de l'appareil médical lorsque l'appareil sans fil est allumé,qsg_m9_113.indd 69 02.11.2011 09:59:28
70snom m9 Quick Start GuideFRANÇAIS• ne pas transporter l'appareil sans fil dans une poche située sur la poitrine,• portez l'appareil sans fil à l'oreille opposée à l'appareil médical afin de minimiser les interférences potentielles,• éteignez immédiatement l'appareil sans fil s'il y a une quelconque raison de suspecter la présence d'interférences,• lisez et suivez les instructions du constructeur de l'équipement médical.Pour toute question concernant l'utilisation de votre appareil sans fil avec un équipement médical implanté, consultez votre médecin.Conforme à SELV (Safety Extra Low Voltage) - TBTS (Très Basse Tension de Sécurité)Le niveau de sécurité des connexions d'entré/sortie est conforme aux re-commandations SELV /TBTS.Avertissement : Pour éviter les électrocutions, ne connectez pas les circuits de SELV / TBTS aux circuits sous tension du réseau téléphonique (TNV). Les ports du réseau local (LAN) contiennent des circuits TBTS et les ports RTCP contiennent des circuits TNV. Certains ports LAN et RTCP utilisent des connecteurs RJ-45 (8P8C). Soyez prudent lorsque vous reliez les câbles. Ne connectez le câble NET/Ethernet qu'à un port LAN!Environnements potentiellement explosifsEteignez votre appareil lorsque vous vous trouvez dans une zone à l'atmosphère potentiellement explosive et suivez toutes les indications et instructions. Les étincelles dans ces zones peuvent provoquer des explosi-ons et des incendies et occasionner des blessures corporelles ou même la mort. Eteignez l'appareil dans les lieux contenant du carburant, comme les stations essences et les garages. Respectez les restrictions d'utilisation des équipements radio dans les dépôts de carburant, les réservoirs et les zones de distribution; les usines chimiques ou les endroits ou des explo-sions se produisent. Les zones dont l'atmosphère est potentiellement très explosive sont souvent, mais pas systématiquement, clairement indiquées. Elles comprennent les zones sous le pont des navires, les installations de transfert ou de stockage de produits chimiques, les véhicules utilisant du qsg_m9_113.indd 70 02.11.2011 09:59:29
71snom m9 Quick Start GuideFRANÇAISgaz de pétrole liquéfié (GPL) et les zones ou l'air contient des produits chi-miques ou des particules comme des poudres de grains, de la poussière ou des particules métalliques.Équipements Électroniques SensiblesL'état actuel des recherches permet de conclure que les téléphones DECT n'affectent normalement pas de façon nuisible les équipements électro-niques. Vous devez toutefois prendre certaines précautions si vous désirez utiliser des téléphones DECT à proximité immédiate de tels équipements, comme par exemple d'équipements de laboratoires sensibles. Conservez toujours une distance minimale de 10 cm de l'appareil, même lorsque le téléphone est en veille. Surtensions ÉlectriquesNous vous recommandons d'installer un parasurtenseur sur la prise secteur à laquelle l'appareil est connecté afin d'éviter que la foudre ou des sautes de tensions n'endommagent l'appareil.BattÉrieCet appareil utilise une batterie rechargeable Lithium-Ion de 3,7V; 650mAh. N'utilisez que des batteries de la marque "snom" et de numéro P/N 60020438 ou 60020438 fournie avec le combiné ou de batteries de rechange approuvées par snom technology AG. N'utilisez aucun au-tre type de batterie car il y a un risque de fuite, d'incendie, d'explosion et d'autres situations dangereuses. Pour remplacer ou retirer la batterie, il vous faut d'abord ôter le couvercle de la batterie du combiné. Ne dé-montez, n'altérez et ne court-circuitez jamais les batteries et ne les utilisez jamais dans un but pour lequel elles n'ont pas été prévues. Ne rechargez la batterie qu'avec le combiné snom m9 placé sur le chargeur snom m9 livré avec l'appareil.Chargement et déchargement, stockage de la batterieUne batterie neuve n'offre ses meilleures performances qu'après deux ou trois cycles de chargement et de déchargement complets. La batterie peut être chargée et déchargée des centaines de fois mais finira par s'épuiser. N'utilisez que des batteries approuvées par snom technology AG.qsg_m9_113.indd 71 02.11.2011 09:59:29
72snom m9 Quick Start GuideFRANÇAISUne batterie complètement rechargée finira par perdre de sa charge avec le temps si elle est laissée inutilisée. Si la batterie est complètement dé-chargée, il se peut qu'il faille quelques minutes avant que l'indicateur de charge n'apparaisse ne s'affiche.N'utilisez la batterie que dans le but pour lequel elle a été conçue. Ne court-circuitez pas la batterie. Le fait de court-circuiter les bornes de la batterie peut endommager cette dernière ou l'appareil auquel elle est connectée. N'utilisez PAS de batteries ou de chargeurs endommagés. L'utilisation d'une batterie endommagée peut provoquer l'explosion de cette dernière!Ne placez pas et ne stockez pas la batterie, que ce soit à l'intérieur ou à l'extérieur du combiné, à proximité immédiate d'une flamme nue ou d'autres sources de chaleur.Laisser la batterie dans un endroit chaud ou froid réduira sa capacité et sa durée de vie. Rechargez la batterie avec une température ambiante comprise entre 0°C et 40°C. Un appareil dont la batterie est chaude ou froide peut cesser temporairement de fonctionner, même si la batterie est complètement rechargée. Evitez les surcharges. Des surcharges répétées peuvent occasionner une détérioration des performances de la batterie. Ne tentez jamais de rechar-gez la batterie en inversant sa polarité car ceci pourrait provoquer une augmentation de la pression du contenu de la batterie et occasionner des fuites. Pour un stockage de courte durée, rangez la batterie dans un end-roit sec et peu humide, à l'abri des gaz corrosifs et à une température com-prise entre -20°C et 45°C. Pour un stockage de longue durée, conservez la batterie à une température comprise entre +10°C et +30°C.Mise au rébut des batteriesNe jetez pas la batterie au feu ni dans un incinérateur. RISQUE D'EXPLOSION!nettoYageUtilisez un tissu antistatique. N'utilisez pas de l'eau ou un produit de nettoyage liquide ou solide. Ils peuvent endommager l'éléctronique ou les sufaces de station de base, chargeurs et combinés.qsg_m9_113.indd 72 02.11.2011 09:59:29
73snom m9 Quick Start GuideFRANÇAISMise au rÉButMise au Rébut du ProduitCe téléphone est soumis à la Directive 2002/96/CE et ne peut être mis au rebut avec les déchets ménagers normaux.Si vous ne savez pas ou mettre au rebut oú faire recycler l'appareil lorsqu'il arrive au terme de son existence, contactez votre municipalité, la société locale en charge de la gestion des déchets ou votre vendeur.Mise au Rébut des BatteriesLes batteries sont soumises à la Directive 2006/66/CE et ne peut être mis au rebut avec les déchets ménagers normaux..Si vous ne savez pas ou mettre au rebut oú faire recycler les batterie lorsqu'elles arrivent au terme de leur existence, contactez votre municipalité, la société locale en charge de la gestion des déchets ou votre vendeurPour les pays hors de l'Union Européenne :La mise au rebut des équipements électriques et électronique dans les pays hors de l'Union Européenne doit se faire en respect avec les régle-mentations locales. Veuillez contacter les autorités locales pour d'avantage d'informations.qsg_m9_113.indd 73 02.11.2011 09:59:30
74snom m9 Quick Start GuideFRANÇAISinstallationNous vous recommandons de charger complètement la batterie avant la première utilisation. Cela prend environ 8 heures.prÉparation du coMBinÉ3.1. 2.snom rechargeableLithium-Ionbattery 1. Ouvrez le couvercle du compartiment à piles.2. Inserez la battérie en vous assurant que les contacts soient bien en place. Remettez le couvercle.3. D'abord, connectez le connecteur (5,9 V) du chargeur à la prise de courant, ensuite au chargeur. Placez le combiné sur le chargeur.station de Base1. Après que le combiné à été chargé complètement, connectez le câble réseau (Ethernet) au port NET de la base, puis à un port LAN sur votre réseau (switch, router, etc.).2. D'abord, connectez le connecteur (5 V) de la base à la prise de courant, ensuite à la base.NETRESET 5V DCNET5V DCConnecteur d‘alimentationBouton redémarragePort réseau3. La LED d'alimentation s'allume et la station de base commence à démarrer.qsg_m9_113.indd 74 02.11.2011 09:59:32
75snom m9 Quick Start GuideFRANÇAIS4. Sitôt que cette opération a été conclu, la LED appels commence à clignoter. Ce clignotement indique que la station de base attend l'enrégistration du premier combiné.LED d‘alimentation – allumée lorsque le base est connecté a l‘alimentation LED appels – clignote pendant mise à jour du logiciel – allumée pendant appel en cours –clignote lentement pendant que la base attend la régistration d‘un combinéLED d‘enregistrement allumée pour indiquer que la base est enrégistrée (au moins une fois)LED Réseau – clignote pendant le démar-rage pour indiquer que la base ait reçu une adresse IPle coMBinÉVue de cotéBeltClip (fixation de ceinture)Touche réglage volume+-Régler le volume• de la sonnerie lorsqu‘un appel sonne• de l‘écouteur ou l‘haut-parleur lorsqu‘un appel est en coursConnecteur micro-casque (2,5 mm)Touche mains-libres (haut-parleur actif/inactif)Vue d'en bas Haut-parleurmains-libres Couvercle de la batterie qsg_m9_113.indd 75 02.11.2011 09:59:35
76snom m9 Quick Start GuideFRANÇAISVue de faceTouche de navigation En mode inactif, appuyez sur le bord haut/bas/droit/gauche (représenté dans ces pages par ///) ou le bouton au centre () pour ouvrir les menus ou fonctions suivant(e)s:Menu principalAnnuaireIntercomMenu ParamètresMenu PréférencesDans d‘autres contextes appuyez sur  ou  pour naviger au menus et listes.Touche téléphone vertDécrocher;Initier des appels;Confirmer des actionsTouche de fonction gaucheEcran inactif: Listes des appelsTouche de fonction droiteEcran inactif: Lecteur RSSTouche rougeRaccrocher;Annuler des actions;Allumer/éteindre le combinéÉcouteurÉcran couleurClavier alphanumériqueTouche RVerouiller/déverouiller clavier alphanum.Touche étoileChange input mode (numbers, small/ capital letters qsg_m9_113.indd 76 02.11.2011 09:59:36
77snom m9 Quick Start GuideFRANÇAISla Mise en page de l’Écran inactifEtat de charge de la batterieRouge=critiqueJaune=moins de 50%Vert=plus de 50%MenuPréférencesLecteur RSSLigne des touches contextuelles avec des symboles dependant du contexteHeure et dateCompte VoIP:Listes des appels:ManquésReçusComposésForce du signal: Haut=vert Bas=grisLigne d‘étatl'enregistreMent du coMBinÉ1. Appuyez sur (touche téléphone rouge). Le texte "Recherche base en cours" est affiche à l'écran. Sitôt que le combine a trouvé la base, le texte "PIN" est affiché à l'écran.2. Saisissez le PIN d'usine par défaut "0000".3. Appuyez sur "OK".Attention: Si l'enrégistrement automatique du combiné échoue, vous pouvez également l'enrégistrer manuelle-ment. Appuyez sur "->" pour ouvrir le menu "Paramètres". Utilisez la touche de navigation pour sélectionner "Com-biné" et ensuite "Enrégistrer combiné". Sélectionnez "Base 1" et appuyez sur la touche de fonction au-dessous "OK" pour enrégistrer le combiné chez la station de base.4. Sitôt que le combine a été enrégistré, l'écran inactif s'affiche sur l'écran:qsg_m9_113.indd 77 02.11.2011 09:59:37
78snom m9 Quick Start GuideFRANÇAISconfigurer un coMpte Voip1. Appuyez sur  et  sur la touche de navigation et "OK". La page --Handset-- avec l'dresse IP de la station de base est affiché à l'écran. Notez-la.2. Appuyez sur le bord haut  de la touche de navigation (cf. page 75). --Handset-- est affiché à l'écran. Notez le "Handset ID", par exemple: 00FEA101C0 (sans "h" à la fin, si visible).3. Ouvrez le navigateur (browser) de votre ordinateur. Saisissez http://<IP address> dans la barre d'adresse. Appuyez sur la touche pour ouvrir l'interface web de la station de base. Nom d'utilisateur (paramètre de défault): admin Mot de passe (paramètre de défault): password4. Cliquez sur "Identity 1" au menu à gauche.5. Saisissez les données du compte SIP que vous avez reçu de votre administrateur réseau ou de votre fournisseur de VoIP.Account = comptePassword = mot de passeAuthentication Name = authentification du nom d'utilisateurMailbox = compte de la messagerie vocale Display Name = nom/numéro d'affichage, peut être choisi librement6. Cliquez sur l'onglet "Handsets". 7. Sélectionnez le numéro du combiné (Handset ID) dans la liste déroulante de "Handset ID (IPUI)". Cliquez sur "Save".8. Maintenant votre snom m9 est prêt à l'emploi.qsg_m9_113.indd 78 02.11.2011 09:59:37
79snom m9 Quick Start GuideFRANÇAISles Menus du tÉlÉphone1. Appuyez sur le bouton au centre de la touche de navigation pour ouvrir le menu principal.ParamètresTitre du menu / de la fonction sélectionnéeFonction actuelle de la touche de fonction au-dessousAnnuairePréférencesRéveilOutils de BureauIntercom2. Appuyez sur le bord haut/bas/droit/gauche de la touche de navigation (représenté dans ce Quick Start Guide par ) pour naviger sur l'écran.3. Appuyez sur la touche de fonction au-dessous de "OK" pour ouvrir des sous-menus ou pour initier une fonction. Appuyez sur la touche de fonction au-dessous d'"Annul" pour revenir à l'écran inactif.annuaireSélectionnez une entrée existante ou <Nouvelle Entrée> avec .Nouvelle Entrée: Saisissez le nom et le numéro à l'invite de commandes et sélectionnez une mélodie. Appuyez sur "OK".Entrée/numéro affiché à l'écran: Appuyez sur pour appeler le numéro ou appuyez sur pour quitter l'annuaire.outils de BureauChronomètre, Calculatrice, Bloc-notes, Calendrier, Lecteur RSS, Messagerie vocale (écouter votre messages)qsg_m9_113.indd 79 02.11.2011 09:59:38
80snom m9 Quick Start GuideFRANÇAISMenu paraMÈtresDate/Heure Réseau CombinéFuseau horaireServeur heureFormatFormat dateFormat heureVLANDHCPPasserelle IP Serveur DNSEnregistrer combinéSélection-ner baseDésinscire combinéRedémarrage combinéMise à jour du logicielVersionRedémarrage baseVoIPNom d‘affichageCompteMot de passeMessagerie vocalRegistrarOutbound ProxyChanger Code PINNouveau PIN:Info SystèmeAdresse IP, adresse MAC, version fi rmware, l‘identifi cation de la base et du combinéqsg_m9_113.indd 80 02.11.2011 09:59:39
81snom m9 Quick Start GuideFRANÇAISMenu prÉfÉrences“OK” > Sélectionner une langue avec  > appuyez sur “OK” LangueSélectionner avec  > “OK” Décrocher automat.ÉcranÉcran de veilleFond d‘écranContrasteRétro-éclairageNe pas déranger. Les appels entrant ne sonnent pasNPDSélectionner la condition et appuyezsur “OK” Sélectionner le numéro de destinationpour les appels renvoyés > “OK”Paramè- tres AudioParam. SonnerieAppels internes* Appels externesClic clavierTonalité de chargeBatterie presque videNouveau messageTonalité de confirma-tionTonalité d‘ avertissem.Sélectionner mélodie + vo-lume avec  et appuyez sur “OK”Sélectionner “Activer” avec  > “OK” * Appels internes: Par autres combinés enregistrés avec la même station de baseToujoursRenvoi d‘appelJamaisOccupéAprès délai/sec.Numéro destinat.rÉVeilActiver | Heure | Sonnerie réveilintercoMAppel général: Appeler tous les combinés enregistrés sur la même station de baseCombiné No.: Appeler le combiné sélectionné. qsg_m9_113.indd 81 02.11.2011 09:59:40
82snom m9 Quick Start GuideFRANÇAISutiliZer Votre M9Passer et accepter des appelsAppeler: Saisir le numéro > appuyer sur "OK" ou Décrocher: Appuyer sur Raccrocher: Appuyer sur Recomposer un numéroAppuyer sur > Sélectionner le numéro > appuyer sur "OK" ou Renvoi d'appelOuvrir le menu Préférences > Renvoi d'appel > saisir le PIN > appuyer sur "OK" > sélectionner une identité > sélectionner la condition (toujours, occupé, après délai (en secondes)) > sélectionner l'adresse SIP > saisir le numéro de téléphone destinataire > appuyer sur "OK" > Vous verrez la question " Redémarrer maintenant?" á l'écran. Confirmer avec "Oui" (yes)Désactiver le renvoi d'appel: Renvoi d'appel > saisir le PIN > appuyer sur "OK" > sélectionner l'identité > sélectionner la condition "Jamais"Appel en attentePlacer appel en attente: Appuyer sur "Options" > AttenteReprendre l'appel en attente: Appuyer sur "Options" > UnholdPasser l'appel en ligneAppuyer sur "Options" > Transfer > saisir le numéro > appuyer sur"OK" qsg_m9_113.indd 82 02.11.2011 09:59:40
83snom m9 Quick Start GuideFRANÇAISdiVersTrouver l'adresse MAC (= numéro de série) de la station de baseAppuyez sur  et  sur la touche de navigation et "OK" (menu Paramètres > Info système > Réseau)Trouver l'adresse IP de la station de baseAppuyez sur  et  sur la touche de navigation et "OK" (menu Paramètres > Info système > Réseau)Ouvrir l'interface Web de la station de baseSaisissez http://<IP address> dans la barre d'adresse et appuyez sur la touche . Redémarrage de la station de baseMenu "Paramètres" > Combiné > Redémarrage base > "OK"OUappuyez sur la touche "Reset" en bas de la station de base.Redémarrage du combinéMenu "Paramètres" > Combiné > Redémarrage combiné. > "OK"qsg_m9_113.indd 83 02.11.2011 09:59:40
84snom m9 Quick Start GuideFRANÇAISqsg_m9_113.indd 84 02.11.2011 09:59:40
85snom m9 Quick Start GuideITALIANOQuesta è la guida rapida per l'installazione, l'impostazione e il funzionamento dello snom m9. Per ulteriori informazioni consultare la nostra pagina web http://wiki.snom.com. contenuto della confeZioneComplete SetHandset Kit1. Stazione di base 1 x -2. Trasformatore per la base (5 V, spina DC Ø interno 2,1 mm, Ø esterno 5,5 mm)1 x -3. Cavo di rete 1 x -4. Telefono 1 x 1 x5. Batteria ricaricabile 3,7 V Lithio-Ion 1 x 1 x6. Caricabatteria per il telefono 1 x 1 x7. Trasformatore per il caricabatteria (5,9 V, spina DC inner Ø interno 1,35 mm, outer Ø esterno 3,5 mm)1 x 1 x8. Clip cintura 1 x 1 xSono necessarii dati ricevuti da amministratore di rete o provider VoIP :1. Utente (di solito corrisponde al numero di telefono) (obbligatorio)2. Indirizzo IP (obbligatorio)3. Password, autenticazione dell'utente, Outbound Proxy (potrebbe essere obbligatorio), account/utente segreteria telefonica (se disponibile)4. Se DHCP non è disponibile, per l’inizializzazione automatica sono necessari il indirizzo IP, il gateway IP e il server DNS. Premere > (menu Impostazioni) > Rete > digita PIN > seleziona – in successione - IP Gateway e DNS Server con "OK".qsg_m9_113.indd 85 02.11.2011 09:59:40
86snom m9 Quick Start GuideITALIANOCopyright, marchi registrati, GPL, declinazione di responsabilita© 2011 snom technology Aktiengesellschaft Tutti i diritti riservati. snom, i nomi dei prodotti snom, ed i loghi snom sono marchi registrati di proprietà di snom technology AG. Tutti gli altri nomi di prodotti e di imprese sono proprietà dei rispettivi proprietarisnom technology AG si riserva il diritto di modificare ed aggiornare questo documento in qualsiasi momento, senza l’obbligo di avviso di tali modifiche ed aggiornamenti nè prima nè dopo. Testi, immagini ed illustrazioni ed il loro ordine in questo documento sono soggetti a protezione del diritto d’autore ed altri diritti legali a livello mondiale. Il loro utilizzo, riproduzione e trasmissione a terzi senza il permesso scritto potrebbe dar luogo ad azioni legali, in sede penale e civile.Quando questo documento viene reso disponibile sulla pagina web di snom, snom technology AG autorizza al download e alla stampa di copie del contenuto allo scopo di utilizzarlo come manuale. Nessuna parte di questo documento può essere alterata, modificata od utilizzata a scopo commerciale senza l’esplicito consenso scritto di snom technology AG.Sebbene sia stata prestata la massima attenzione nella stesura e presentazione delle informazioni in questo documento, i dati sui quali si basa potrebbe variare nel frattempo. snom pertanto declina ogni responsabilità riguardo a tutte le garanzie ed affidabilità sull’accuratezza, completezza e attualità delle informazioni pubblicate, tranne nel caso di grossolana negligenza da parte di snom o laddove per legge è ritenuta responsabile. La nostra firmware include del codice sorgente che può essere utilizzato e modificato da chiunque, e sotto la licenza pubblica GNU (GPL) (vd. pagina 124), possonorenderlo disponibile ad altri con lo stesso accordo di licenza. Visitate http://www.snom.com/de/support/download/gpl-quellcode/ per la licenza GPL originale e per i codici di sorgente di componenti sotto licenza GPL ed utilizzati in prodotti snom.qsg_m9_113.indd 86 02.11.2011 09:59:40
87snom m9 Quick Start GuideITALIANO conforMitÀ norMaIl telefono è certificato CE e FCC e risponde agli standard Europei e statunitensi di salute, sicurezza ed ambientali Modifiche, cambiamenti, pertura del telefono non autorizzati invalidano la garanzia e potrebbero annullare anche le certificazioni CE e FCC. In caso di malfunzionamento contattare il personale di assistenza autorizzato, il rivenditore, o snom.qsg_m9_113.indd 87 02.11.2011 09:59:40
88snom m9 Quick Start GuideITALIANOprecauZioni di sicureZZaLeggere le precauzioni e le istruzioni per l’installazione e l’utilizzo della base e del telefono. Conservare la presente Guida rapida e non cedere il dispositivo a terzi senza di essa. Consultare le informazioni generali per la sicurezza, le informazioni specifiche per il paese e quelle generali sulla sicurezza per USA, Australia e Nuova Zelanda. Alimentatori/adattatori, batteria ricaricabile• Utilizzare esclusivamente il trasformatore (adattatore AC/DC) fornito con la base e il telefono oppure quelli espressamente raccomandati da snom. Alimentatori elettrici diversi da quelli prescritti potrebbero danneggiare anche permanentemente il dispositivo/i.Adattatori Elementech, Modello No.Stazione di base Caricabatteria telefono Europe senza UK AU1050507e AU1050607eUK AU1050505b AU1050605bUSA & Canada AU1050507u AU1050607uAustralia AU1050505s AU1050605s• Utilizzare esclusivamente le batterie ricaricabili in dotazione con il ricevitore oppure quelle espressamente raccomandate da snom.Posizione di base, caricatore, fili, cavi• Posizionare i cavi del dispositivo in maniera che nessuno possa calpestarli o inciamparvi. Non sottoporre fili e cavi a pressioni meccaniche che potrebbero danneggiarli. Se il cavo di alimentazione è danneggiato scollegare il dispositivo e rivolgersi all’assistenza autorizzata.• Base, caricatori, ricevitori, trasformatori e cavi sono concepiti per uso domestico e per funzionare ad una temperatura compresa tra n +5°C d +45°C. NON INSTALLARE ALL’APERTO!• Non installare il prodotto in ambienti molto umidi (ad esempio bagni, lavanderie e sotterranei umidi). Non immergere in acqua e non versare liquidi di nessun genere su nessun componente.• Non installare la base e il ricevitore in luoghi a rischio di esplosione (ad esempio negozi di vernici). Non utilizzare il telefono in presenza di gas o altri fumi potenzialmente esplosivi!qsg_m9_113.indd 88 02.11.2011 09:59:41
89snom m9 Quick Start GuideITALIANO• I dispositivi medici potrebbero subire interferenze. In caso di installazione in studi medici, per esempio, considerare le ramificazioni elettriche.Se siete portatori di un pacemaker impiantato• Non utilizzare se si è portatori di pacemaker salvo diversa indicazione del produttore del pacemaker che approvi l’uso di dispositivi che emettono segnali di frequenze radio. Attenersi sempre alle direttive del produttore! • Distanza MINIMA dal ricevitore: 20 cm (7.9").• Non portare il ricevitore nelle tasche sul petto.• Tenere il ricevitore nell’orecchio opposto rispetto al dispositivo medico per ridurre le potenziali interferenze.• Spegnere immediatamente il ricevitore in caso di sospetta interferenza.Altri rischi per la salute Non tenere vicino l’orecchio l’altoparlante sul retro del ricevitore quando il telefono squilla o quando è attivo il vivavoce. Si rischiano danni gravi e irreversibili all’udito!Se siete portatori di protesi acusticaIl ricevitore potrebbe causare un fastidioso rumore di fondo. inforMaZioni aggiuntiVe sulla sicureZZa Bambini piccoliIl dispositivo e i suoi accessori potrebbero contenere piccoli pezzi. Tenere lontano dalla portata di bambini piccoli.Ambiente operativoRicordate di attenervi alle norme speciali previste nel vostro paese e di spegnere sempre il dispositivo se il suo uso non è consentito o quando potrebbe provocare interferenze o danni. Utilizzate il dispositivo solo nelle sue posizioni operative normali. Non mettere mai carte di credito o altri dispositivi magnetici per la memorizzazione di dati vicino al dispositivo in quanto le informazioni contenute potrebbero cancellarsi.qsg_m9_113.indd 89 02.11.2011 09:59:41
90snom m9 Quick Start GuideITALIANODispositivi mediciQualunque altro dispositivo che emette radiofrequenze potrebbe interferire con il funzionamento dei dispositivi medici non adeguatamente schermati. Rivolgetevi a un medico o al produttore del dispositivo medico per stabilire se quest’ultimo è adeguatamente schermato dall’energia esterna di in radiofrequenza o se avete altre domande a riguardo. Spegnete il dispositivo all’interno di strutture sanitarie in cui non ne è ammesso l’uso. Ospedali e cliniche utilizzano spesso apparecchiature sensibili a energia esterna di in radiofrequenza.Dispositivi medici impiantatiI produttori di dispositivi medici raccomandano di mantenere una distanza minima di almeno 20 centimetri tra il dispositivo senza fili e il dispositivo medico impiantato (ad esempio pacemaker o defibrillatore cardiaco impiantabile) per evitarne potenziali interferenze. I portatori di questi tipi di dispositivi medici dovranno: • Tenere sempre a una distanza minima di 20 centimetri il dispositivo medico quando il dispositivo senza fili è acceso.• Non portare il dispositivo senza fili nelle tasche sul petto.• Tenere il dispositivo senza fili sull’orecchio opposto rispetto alla posizione del dispositivo medico per ridurre le potenziali interferenze.• Spegnere immediatamente il ricevitore in caso di sospetta interferenza.• Leggere e attenersi alle istruzioni del produttore del dispositivo medicoSe avete dubbi sull’uso di un dispositivo senza fili insieme a un dispositivo medico impiantato rivolgetevi all’addetto sanitario.Conforme al circuito SELV (bassissima tensione di sicurezza)Lo stato di sicurezza dei collegamenti in uscita e in entrata è conforme alle disposizioni del circuito SELV.Attenzione: Per evitare scosse elettriche non collegare i circuiti SELV a quelli della rete telefonica (TNV). Le porte LAN hanno circuiti SELV, le porte PSTN hanno circuiti TNV. Alcune porte LAN e PSTN utilizzano connettori RJ-45 (8P8C). Collegare i cavi con molta attenzione.qsg_m9_113.indd 90 02.11.2011 09:59:41
91snom m9 Quick Start GuideITALIANOAmbienti potenzialmente esplosiviSpegnere il dispositivo in ambienti a rischio di esplosione e attenersi a eventuali cartelli e istruzioni. Una scintilla potrebbe provocare un’esplosione, un incendio e conseguenti lesioni personali e persino la morte. Spegnere il dispositivo nelle stazioni di servizio e vicino alle pompe di benzina. Attenersi ai limiti imposti sull’uso di dispositivi radio all’interno di depositi, magazzini e aree di erogazione di carburante; impianti chimici o laddove sono in corso operazioni di brillamento. Le aree a rischio potenziale di esplosione non sono sempre ben segnalate e includono la parte sotto il ponte delle barche, trasporti di sostanze chimiche o magazzini, veicoli che utilizzano GPL e ambienti in cui l’aria è satura di sostanze chimiche o particelle come polveri di metallo.Apparecchiature elettroniche sensibili Allo stato attuale la ricerca stabilisce che i telefoni DECT normalmente non interferiscono negativamente con altre apparecchiature elettroniche. Tut-tavia consigliamo di seguire alcune precauzioni di base se si vuole azionare un telefono DECT nelle immediate vicinanze di apparecchiature sensibili come quelle di un laboratorio. Tenere sempre a una distanza minima di 10 cm dall’apparecchiatura anche quando il telefono è in standby.Sovratensioni elettriciSi consiglia di installare un protettore di sovratensione AC alla presa AC a cui si collega il dispositivo per evitare danni provocati da fulmini o altre sorgenti elettriche.inforMaZioni iMportanti sulla Batteria Questo prodotto utilizza batterie ricaricabili Lithium-Ion 3.7V, 650mAh. Utilizzare esclusivamente batterie marcate “snom” e P/N: 60020438 o 60020438 in dotazione con il ricevitore o batterie conformi alla tecnologia snom AG. Non utilizzate altri tipi di batteria in quanto potrebbero verificarsi perdite, fiamme, esplosioni o altre situazioni rischiose. Prima di rimuovere o sostituire la batteria è necessario rimuovere il coperchio della batteria del ricevitore. Non separate, modificate o provocate il corto circuito delle batterie e non utilizzatele per scopi diversi da quelli previsti. Per ricaricare le batterie ponete il ricevitore sullo snom m9 in dotazione.qsg_m9_113.indd 91 02.11.2011 09:59:41
92snom m9 Quick Start GuideITALIANORicaricare, scaricare e conservare Il ricevitore è dotato di una batteria ricaricabile. Una nuova batteria raggiunge la piena prestazione solo dopo che è stata scaricata e ricaricata completamente per due o tre volte.La batteria può essere ricaricata e scaricata centinaia di volte ma alla fine il suo ciclo di vita si esaurisce. Utilizzare batterie conformi alla tecnologia snom AG.Se non utilizzata per molto tempo, la batteria carica potrebbe scaricarsi da sola. Quando la batteria è completamente scarica, potrebbero volerci alcuni minuti prima che l’indicatore di carica compaia sul display.Utilizzare la batteria esclusivamente per l’uso previsto. Evitare il corto circuito delle batterie. Il corto circuito dei terminali potrebbe danneggiare la batteria e l’oggetto collegato. NON utilizzare batterie o caricatori danneggiati. L’utilizzo di una batteria danneggiata potrebbe provocare un’esplosione. Non posizionate o conservate le batterie, all’interno o all’esterno del ricevitore, nelle immediate vicinanze di fiamme libere o altre fonti di calore. Lasciare le batterie in ambienti troppo freddi o caldi potrebbe comprometterne la loro capacità e il ciclo di vita. Ricaricate le batterie ad una temperatura compresa tra 0° C e 40° C. Una batteria troppo calda o fredda potrebbe non funzionare temporaneamente anche se completamente carica. Evitare di caricare più del dovuto. Ciò potrebbe determinare nel tempo la riduzione delle prestazioni della batteria. Non provare mai a ricaricare la batteria con le polarità invertite. Ciò potrebbe provocare l’aumento di pressione del gas contenuto nella batteria o perdite di liquido. Per brevi periodi: conservate le batterie in ambienti secchi e con scarsa umidità, in assenza di gas corrosivi e a una temperatura compresa tra -20° C e 45° C. Per lunghi periodi: conservate le batterie a temperature comprese tra +10° C e +30° C.Smaltimento della batteria Non smaltire le batterie nel fuoco o in un inceneritore. RISCHIO DI ESP-LOSIONE!Le batterie difettose o esaurite non devono essere smaltite insieme ai rifiuti qsg_m9_113.indd 92 02.11.2011 09:59:41
93snom m9 Quick Start GuideITALIANOdomestici. Riconsegnate le vecchie batterie al fornitore, un operatore autorizzato allo smaltimento o un centro di raccolta specifico.puliZiaUtilizzare un panno antistatico. Evitare acqua e altri liquidi o detergenti solidi che potrebbero danneggiare la superficie o l’elettronica interna di base, caricabatteria e portatile.sMaltiMentoSmaltimento del telefonoQuesto telefono è soggetto alla Direttiva Europea 2002/96/EC e non può essere buttato tra i normali rifiuti domestici.Se non sapete come smaltire l’apparecchio una volta inutilizzabile, contattate il comune, la nettezza urbana locale, o il vostro rivenditore.Smaltimento della batteriaLa batteria è soggetto alla Direttiva Europea 2006/66/EC e non può essere buttato tra i normali rifiuti domestici.Se non sapete come smaltire la batteria una volta inutilizzabile, contattate il comune, la nettezza urbana locale, o il vostro rivenditore.qsg_m9_113.indd 93 02.11.2011 09:59:42
94snom m9 Quick Start GuideITALIANOinstallaZionePrima di utilizzare per la prima volta il telefono, le batterie del portatile dovranno essere lasciate in carica per circa 8 ore. predisposiZione del telefono1. Sollevare il coperchio del vano batteria. 2. Inserire il pacco batteria con gli elettrodi nell’angolo in alto a sinistra. Chiudere il coperchio.3. Collegare il cavo di alimentazione (5,9 V) del caricabatteria, prima alla presa a muro e poi al caricabatteria, e sistemare il telefono nell’apposito alloggiamento. 3.1. 2.snom rechargeableLithium-Ionbattery staZione Base1. Quando il telefono è pronto per l’uso, collegare il cavo di rete da una parte alla porta NET, sul retro della base, e dall’altra alla porta LAN della rete (centralina, router, ecc.).2. Collegare il trasformatore (5 V) prima alla presa a muro e DOPO alla base.NETRESET 5V DCNET5V DCIngresso corrente elettr.PulsanteriavviarePort red3. La spia di accensione si illumina e la base viene inizializzata.qsg_m9_113.indd 94 02.11.2011 09:59:44
95snom m9 Quick Start GuideITALIANO4. Al termine dell’inizializzazione, il LED chiamata inizia a lampeggiare per indicare che la base è in attesa di registrare il telefono.LED Corrente – illuminato quando è accendenteLED Chiamata – lampeggia durante l’aggiornamento del firmware – si accende quando è in corso una chiamata – lampeggia lentamente in attesa della registrazione del telefonoLED Registrazione – si accende quando la base è in fase di registrazioneLED Rete – lampeggia in fase di avvio per indicare che il base ha ottenuto un indirizzo IPdescriZione telefonoVista laterale Clip cinturaTasto regolazione volume +-Regola il volume• della suoneria quando una chiamata è in entrata • del vivavoce durante la chiamataJack microfono-cuffia (headset) 2,5 mmTasto vivavoce (on/off)Vista posteriore Altoparlante vivavoce Coperchio vano batteriaqsg_m9_113.indd 95 02.11.2011 09:59:47
96snom m9 Quick Start GuideITALIANO Vista frontaleTasto navigazione In modalità inattivo, premere il bordo superiore/inferiore/destro/sinistro (raffigurante in questo manuale di ///) o til tasto al centro () per accedere ai menu e alle funzioni qui di seguito:Menu principaleRubricaIntercomMenu ImpostazioneMenu PreferenzeIn altri contesti premere  o  per navigare tra menu ed elenchi.Tasto verdeAccetta chiamateComponi numero Conferma Tasto funzione sinistraSchermo inattivo: elenco chiamateTasto funzione destraSchermo inattivo: Lettore RSSTasto rossoTermina chiamateAnnulla azione Interrutore on/offAuricolareDisplay a coloriTastiera alfanumericaTasto RBlocco + sblocco tastieraTasto asterisco Modifica modo immissione (numeri, piccoli + maiuscole)qsg_m9_113.indd 96 02.11.2011 09:59:48
97snom m9 Quick Start GuideITALIANOaspetto del displaY, displaY inattiVoLivello della batteriaRosso=scaricaGiallo=meno del 50%Verde=oltre il 50%MenùPreferenzeLettore RSSRiga tasto funzionecon simboli sensibili al contestoOra e dataAccount VoIP:Registro chiamate:PerseRicevuteNum.compostiPotenza segnale: Elevata=verdeBassa=grigiaLinea stato Registrazione telefono1. Premere (tasto rosso sul telefono). Sul display compare la scritta: "Ricerca stazione base". Dopo che il apparato ha trovato la base, compare il messaggio per l’inserimento del PIN.2. Digitare il PIN di default "0000".3. Premere "OK".Nota: Se la registrazione automatica del telefono non va a buon fine, la registrazione potrà essere eseguita manualmente. Premere "->" to enter the Settings menu. per accedere al menu Impostazioni. Accedere nel menu "Telefono" e premere "Registra telefono". Selezionare "Base 1". Digitare il PIN a premere "OK" per registrare il telefono.4. Se la registrazione è riuscita, il display visualizza la schermata inattivo:qsg_m9_113.indd 97 02.11.2011 09:59:50
98snom m9 Quick Start GuideITALIANOConfigurazione di un account VoIP 1. Premere  e  sul tasto navigazione e "OK". La pagina --Network-- con l’indirizzo IP della base viene visualizzato sul display. Annotare il numero IP.2. Premere il bordo superiore  del tasto navigazione. La pagina --Handset-- viene visualizzato sul display. Annotare il numero di identificazione "Handset ID", per esemplo 00FEA101C0 (senza "h" finale, se visibile).3. Aprire il browser, digitare http://<IP address> nella barra di esplorazione e premere ENTER per accedere all’interfaccia della base sul web. Username (nome utente) di default: admin Password di default: password4. Fare clic su "Identity 1" dal menu a sinistra.5. Immettere i dati SIP dell’account ottenuti dall’amministratore di sistema o dal provider VoIP.Account = utentePassword = PasswordAuthentication Name = autenticazione dell'utenteMailbox = utente segreteria telefonica Display name: = nome visualizzato: liberamente selezionabile6. Cliccare sulla scheda "Handsets". 7. Selezionare il numero di identificazione del telefono nella lista a cascata di "Handset ID (PUI)". Premere "Save".8. Vostro snom m9 è pronto per l’uso.qsg_m9_113.indd 98 02.11.2011 09:59:50
99snom m9 Quick Start GuideITALIANOi Menu del telefono1. Premere al centro del tasto di navigazione per accedere al menu principale.ImpostazioniTitolo della voce evidenziata del menuFunzione attuale del tasto funzioneRubricaPreferenzeSvegliaStrumentiIntercom2. Press il bordo superiore/inferiore/destro/sinistro (raffigurante in questo manuale di ) del tasto di navigazione per navigare sul display.3. Premere il tasto funzione "OK" per accedere a sottomenu/funzioni. Premere il tasto funzione "Cancel" per tornare allo display inattivo.ruBricaSelezionare una voce esistente o <Nuovo contatto> con .Nuovo contatto: Seguire il messaggio per digitare nome e numero e selezionare una suoneria. Premere "OK".Premere per comporre un numero, premere (tasto rosso) per uscire dall’elenco.struMentiCronometro, Calcolatrice, Blocco note, Calendario, Lettore RSS, Messaggio vocale (segretaria - ascoltare le chiamate)qsg_m9_113.indd 99 02.11.2011 09:59:51
100snom m9 Quick Start GuideITALIANOMenÙ configuraZioneData/Ora ReteTelefonoFuso orariaServer NTPFormatoFormato dataFormato oraVLANDHCPRegistrare telefonoSelezionare baseCancellare telefonoRiavviare telefonoAggiornam. FirmwareVersioneRiavviare baseVoIPNome DisplayUtentePasswordSegreteria telefonicaRegistrarOutbound ProxyCambia PINNuovo PIN:Info sistemaIndirizzo IP, indirizzo MAC, versione firmware, numeri di identificazione (telefono e stazione base)qsg_m9_113.indd 100 02.11.2011 09:59:52
101snom m9 Quick Start GuideITALIANOMenÙ preferenZe“OK” > Selezionare lingua con  e premere il tasto “OK” LinguaSelezionare con  > “OK” Risposta automat.DisplayScreen-saverColore sfondoContrastoLuminositàChiamate in entrata non suonanoNon dis-turbareSelezionare la condizione per trasferireuna chiamata e premere “OK” Digitare il numero desti-natario dellechiamate trasferite e premere “OK”Impostaz. AudioImpostaz.suoneriaChiamate interne* Chiamate externeToni (tastiera)Toni di ricaricaBatteria scaricaMWITono di confermaToni di avvisoSelezionare melodia e volumen con  e premere “OK”Selezionare “Attiva” con  e premere“OK” * Chiamate interne: Da altri telefoni registrati sulla stessa base SempreInoltra chiamataMaiSe OccupatoDopo ritardo/sec.Indirizzo SIPsVegliaAttivare | Ora | Suoneria allarmeintercoMChiama tutti: Cerca tutti telefoni registrati alla stessa base ID Telefono: Cerca un telefono specifico registrati alla stessa baseqsg_m9_113.indd 101 02.11.2011 09:59:53
102snom m9 Quick Start GuideITALIANOfunZionaMento telefonoTelefonare a qcn e rispondere a una chiamataTelefonare a qcn: Digitare il numero > premere "OK" o Rispondere a una chiamata: Premere Terminare una chiamata: Premere Ricomponi numeroPremere > s elezionare numero > premere o "OK"Inoltra chiamataPreferenze > Inoltra chiamata > digita PIN > OK > selezionare identità > selezionare condizione (sempre, se occupato, dopo ritardo/sec.) > digitare il numero destinatario SIP > premere OK > sul messaggio, premere "Si" (Yes) per riavviare il telefonoDisattivare inoltra chiamata: Preferenze > selezionare condizione "mai"Chiamata in attesa e recuperoMettere una chiamata in attesa: Premere Opzioni > HoldRecuperare una chiamata in attesa: Premere Opzioni > UnholdTrasferimento chiamataDa Chiamata in linea, premere Opzioni > Transfer > digita numero > premere "OK"qsg_m9_113.indd 102 02.11.2011 09:59:53
103snom m9 Quick Start GuideITALIANOVarieCerca indirizzo MAC (= numero di serie) della basePremere  e  sul tasto navigazione e "OK" (Impostazioni > Info sistema > Rete)Cerca indirizzo IP della basePremere  e  sul tasto navigazione e "OK" (Impostazioni > Info sistema > Rete)Accedere all’interfaccia web della baseDigitare l’indirizzo IP nella barra di esplorazione del browser e premere ENTERRiavviare estazione baseMenu "Impostazioni" > Telefono > Riavviare base > "OK"opremere il tasto "Reset" sul retro della baseRiavviare telefonoMenu "Impostazioni" > Telefono > Riavviare telefono > "OK"qsg_m9_113.indd 103 02.11.2011 09:59:53
104snom m9 Quick Start GuideESPAÑOLqsg_m9_113.indd 104 02.11.2011 09:59:53
105snom m9 Quick Start GuideESPAÑOL Esta es la Guía de Inicio Rápido para la instalación, configuración y uso de la estación base y el teléfono. Para más información, consulte el manual en http://wiki.snom.com. en la caJaComplete SetHandset Kit1. Estación base 1 x -2. Adaptador de alimentación de la estación base (5 V, conexión interna DC Ø 2,1 mm, externa Ø 5,5 mm)1 x -3. Cable de red 1 x -4. Unidad 1 x 1 x5. Batería recargable de litio-ión de 3,7V1 x 1 x6. Cargador de la unidad 1 x 1 x7. Adaptador de alimentación de la unidad (5,9 V, conexión DC interna Ø 1,35 mm, externa Ø 3,5 mm)1 x 1 x8. Clip para cinturón x 1 xTambién necesitalos datos recibidos de su administrador de red o proveedor de servicio VoIP:1. Cuenta (normalmente, el número de teléfono) (obligatorio)2. Registro (obligatorio)3. Contraseña, nombre autenticación, Outbound Proxy (puede ser obligatorio), cuenta de buzon de voz (si está disponible)4. Si el DHCP no está disponible para la inicialización automática, también necesitará la dirección IP, la puerta de enlace IP y el servidor DNS. Pulse > (menú Ajustes/Settings) > Red/Network > introducir PIN > seleccione – secuencialmente - IP puert de enlace/IP Gateway y servidor de DNS/DNS server con "OK".qsg_m9_113.indd 105 02.11.2011 09:59:53
106snom m9 Quick Start GuideESPAÑOLCopyright, Marcas comerciales, GPL, Renuncia Legal© 2011 snom technology Aktiengesellschaft Todos los derechos reservados. snom, los nombres de los productos snom, y los logos de snom son marcas comerciales propiedad de snom technology AG. Los demás nombres de producto y empresas son propiedad de sus respectivos propietarios. snom technology AG se reserva el derecho de revisar y cambiar este documento en cualquier momento, sin obligación de notificar estas revisiones o cambios por adelantado o con posterioridad.Los textos, imagines e ilustraciones, y su organización en este documento, están sujetos a la protección de copyright y otros derechos legales internacionales. Su uso, reproducción y transmisión a terceros sin permiso expreso por escrito puede resultar en procesos legales en cortes penales y civiles. Cuando este documento se haga público en la página web de snom, snom technology AG da permiso para descargar e imprimir copias de su contenido para su uso expreso como manual. Ninguna parte de este documento puede alterarse, modificarse o usarse con fines comerciales sin el consentimiento expreso por escrito de snom technology AG.Aunque se han tomado todas las precauciones posibles en la compilación y presentación de la información de este documento, los datos en los que se basa pueden haber cambiado con el tiempo. snom, por lo tanto, renuncia a cualquier garantía y responsabilidad respecto a la precisión, exhaustividad y actualidad de la información publicada, excepto en el caso de intencionalidad o franca negligencia por parte de snom cuando aparezcan responsabilidades según las provisiones legales vinculantes. Nuestro firmware incluye código fuente que puede ser usado y modificado por cualquier persona bajo la licencia pública GNU (GPL) (vease página 124), siempre que, a su vez, lo haga públicamente disponible con el mismo acuerdo de licencia. Acceda a http://www.snom.com/de/support/download/gpl-quellcode/ para obtener la licencia GPL original y el código fuente de los componentes licenciados bajo GPL y usados en productos snom.qsg_m9_113.indd 106 02.11.2011 09:59:53
107snom m9 Quick Start GuideESPAÑOLcuMpliMiento con la norMatiVaEste teléfono tiene certificación CE y FCC, y cumple con los estándares de salud, seguridad y medioambientales europeos y de Estados Unidos. La apertura, cambio, o modificación no autorizadas del teléfono provocarán que la garantía se cancele, y también pueden resultar en la cancelación de las certificaciones CE. y FCC. En caso de avería, contacte con personal de servicio autorizado, su vendedor, o snom.ID de la base: YDBM9BS1ID de la unidad: YDBM9HS2qsg_m9_113.indd 107 02.11.2011 09:59:54
108snom m9 Quick Start GuideESPAÑOLprecauciones de seguridadLea estas precauciones y las instrucciones de configuración y uso de la base y el teléfono por completo antes de usar el dispositivo. Conserve esta Guía de inicio rápido y no entregue el disposito a terceros sin ella. Vea también la información general de seguridad separada y la información de seguridad y garantía específicas para EE.UU., Australia y nueva Zelanda. Alimentaciones/adaptadores, batería recargable• Use exclusivamente los conversores de alimentación (adaptadorea CA/CC) incluidos con la estación base y el teléfono o las alimentación recomendadas explícitamente por snom. Otras fuentes de alimentación pueden dañar o incluso destruir los dispositivos.Fuente di alimentación Elementech, Model No.Base station Handset charger Europe sin UK AU1050507e AU1050607eUK AU1050505b AU1050605bUSA & Canada AU1050507u AU1050607uAustralia AU1050505s AU1050605s• Use exclusivamente las baterías recargables entregadas con el teléfono o baterías recargables recomendadas explícitamente por snom.Colocación de la base, cargador, cables, conexiones• Evite colocar los cables y conexiones de los dispositivos donde se pueda tropezar con ellos. Evite colocar los cables y conexiones donde puedan estar expuestos a presión mecánica, podrían dañarse. Si el cable de alimentación o el enchufe están dañados, desconecte el dispositivo y contacte con personal cualificado de servicio.• La estación base, cargadores, teléfonos, adaptadores de alimentación y cables son para instalación en interior con una temperatura entre +5ºC y +45ºC. ¡NO ADECUADO PARA INSTALACIÓN EXTERIOR!• No instale el producto en habitaciones con humedad elevado (por ejemplo en baños, lavaderos o sótanos húmedos). No sumerja el producto en agua ni derrame o vierta líquidos de ningún tipo sobre o dentro de ninguna pieza del teléfono.• No instale el producto en entornos con riesgo de explosiones ni use qsg_m9_113.indd 108 02.11.2011 09:59:54
109snom m9 Quick Start GuideESPAÑOLel teléfono en dichos entornos (talleres de pintura, por ejemplo). No use el teléfono si huele a gas u otros gases potencialmente explosivos• Los dispositivos médicos pueden verse afectados. Tenga encuenta las implicaciones técnicas cuando instale, por ejemplo, los dispositivos en la consulta de un médico.Si tiene un marcapasos implantado• No lo use si tiene un marcapasos implantado a menos que las instrucciones del fabricante del marcapasos permiten explícitamente el uso de dispositivos que emitan señales de radiofrecuencia por pulsos. Siga siempre las instrucciones del fabricante! • Distancia MÍNIMA recomendada con el teléfono: 20 cm (7.9").• No lleve el dispositivo inalámbrico en el bolsillo de la camisa.• Aguante el teléfono sobre el oído opuesto al dispositivo médico para minimizar potenciales interferencias.• Apague de inmediado el teléfono si tiene cualquier motivo para sospechar que se están produciendo intereferencias.Otros riesgos para la salud No aguante el altavoz trasero del teléfono contra su oído cuando el teléfono esté sonando o el altavoz esté activado. Peligro de daños graves e irreversibles a su oído!Si lleva audífonoObserve que el auricular puede provocar un molesto ruido de fondo. inforMaciÓn adicional de seguridadNiños pequeñosSu dispositivo y sus accesorios pueden contener piezas pequeñas. Manténgalos fuera del alcance de los niños pequeños.Entorno de funcionamientoRecuerde seguir cualquier normativa aplicable de cualquier zona, y apague siempre el aparato cuando el uso esté prohibido o cuando pueda provocar interferencias o riesgos. Use el dispositivo solamente en sus posiciones de funcionamiento habituales. No ponga tarjetas de crédito ni otros medios de almacenamiento magnético cerca del dispositivo, podría qsg_m9_113.indd 109 02.11.2011 09:59:54
110snom m9 Quick Start GuideESPAÑOLborrarse la información guardada en ellos.Dispositivos médicosEl uso de cualquier equipo que emita señales de radiofrecuencia puede interferir con el funcionamiento de dispositivos médicos no aislados correctamente. Consulte con un médico o con el fabricante del dispositivo médico para determinar si están aislados correctamente de energía de RF externa o si tiene dudas respecto a este asunto. Apague el dispositivo en instalaciones clínicas cuando las señales colgadas en estas áreas se lo indiquen. Los hospitales o instalaciones clínicas pueden usar equipos sebsibles a energía de RF externa.Dispositivos médicos implantadosLos fabricantes de dispositivos médicos recomiendan una distancia mínima de 20 cm (7.9") entre dispositivos inalámbricos y un dispositivo médico implantado, como marcapasos o desfibriladores cariovasculares, para evitar potenciales interferencias con el dispositivo médico. Las personas que tengan estos dispositivos deben: • Mantenga siempre el dispositivo inalámbrico a más de 20 centímetros (7.9") del dispositivo médico cuando el dispositivo inalámbrico esté encendido.• No lleve el dispositivo inalámbrico en el bolsillo de la camisa.• Aguante el dispositivo inalámbrico sobre el oído opuesto al dispositivo médico para minimizar potenciales interferencias.• Apague de inmediato el dispositivo inalámbrico si tiene cualquier motivo para sospechar que se están produciendo interferencias.• Lea y obedezca las instrucciones del fabricante del dispositivo médico.Si tiene dudas sobre el uso de su dispositivo inalámbrico con un dispositivo médico implantado, consulte con su proveedor médico.Cumplimiento SELV (Safety Extra Low Voltage - Seguridad de Tensión Extra Baja) Las condiciones de seguridad de las conexiones de entrada/salida cump-len con los requisitos SELV.Atención: Para evitar electrocuciones, no conecte circuitos de seguridad de tensión extra baja (SELV) a circuitos de tensión qsg_m9_113.indd 110 02.11.2011 09:59:54
111snom m9 Quick Start GuideESPAÑOLde red telefónica (TNV), puertos LAN con circuitos SELV, y puertos PSTN que contengan circuitos TNV. Algunos puertos LAN y PSTN usan conectores RJ-45 (8P8C). Tenga cuidado al conectar los cables.Entornos potencialmente explosivosApague el dispositivo cuando esté en una zona con una atmósfera potencialmente explosiva y obedezca todas las indicaciones e instrucciones. Las chispas en estas zonas pueden provocar una explosión o incendio, provocando heridas o incluso muerte. Apague el dispositivo en zonas de repostado, como cerca de los surtidores de gasolina en estaciones de servicio. Obedezca las restricciones sobre el uso de equipos de radio en depósitos de carburante, zonas de almacenaje y distribución, plantas químicas, o lugares en los que se produzcan operaciones de demolición. Las zonas con una atmósfera potencialmente explosiva están a menudo, pero no siempre, claramente marcadas. Incluyen cubiertas cerradas de barcos, instalaciones de transferencia o almacenaje químico, vehículos que usan gases de petróleo líquido, y zonas en las que el aire contenga químicos o partículas como grano, polvo o virutas metálicas.Equipos electrónicos delicadosEl estado actual de las investigaciones concluye que los teléfonos DECT operativos no afectan normalmente a equipos electrónicos. Sin embar-go, debe tomar ciertas precauciones si desea usar teléfonos DETC cerca de este tipo de equipos, como equipo de laboratorio delicado. Mantenga siempre una distancia mínima de 10 cm del equipo incluso si el teléfono está en espera.Subidas de tensiónRecomendamos instalar un limitador de subidas de tensión CA en la toma CA a la que se conecte este dispositivo para evitar daños al equipo, pro-vocados por rayos locales u otras subidas de tensión eléctrica.inforMaciÓn iMportante de BaterÍaEste producto usa una batería de litio-ión recargable de 3.7V, 650mAh. Use exclusivamente baterías de la marca “snom” y P/N: 60020438 o 60020438 que estuvieran incluidas con el teléfono o baterías de recambio aprobadas por snom technology AG. No use otros tipos de batería, podrían qsg_m9_113.indd 111 02.11.2011 09:59:54
112snom m9 Quick Start GuideESPAÑOLprovocar fugas, incendio, explosión, u otras situaciones peligrosas. Para cambiar o retirar la batería, debe retirar primero la tapa de la batería del teléfono. No desmonte, modifique ni cortocircuite las baterías, ni las use para fines distintos al previsto. Cargue la batería exclusivamente con el teléfono snom m9 colocado en el cargador snom m9 que se incluía con el producto..Carga y descarga, almacenajeEl teléfono se alimenta mediante una batería recargable. El rendimiento completo de una batería nueva sólo se consigue después de dos o tres ciclos de carga y descarga completos.La batería puede cargarse y descargarse centenares de veces, pero even-tualmente se descargará. Use exclusivamente baterías aprobadas por snom technology AG.Si se deja sin uso, una batería totalmente cargada perderá su carga con el tiempo. Si la batería está totalmente descargada, pueden pasar unos minutos hasta que el indicador de carga aparezca en la pantalla.Use la batería solamente para su finalidad. No cortocircuite la batería. Cortocircuitar los terminales puede dañar la batería o el objeto conectado. NO use un cargador o batería dañados. Usar una batería dañada puede hacer que explote.No ponga ni guarde la batería, dentro o fuera del teléfono, cerca de llama abierta ni otras fuentes de calor. Dejar la batería en lugares calientes o fríos reducirá su capacidad y vida útil. Cargue las baterías con una temperatura ambiente de entre 0ºC y 40ºC. Los dispositivos con baterías en caliente o frío pueden dejar de funcionar temporalmente aunque la batería esté totalmente cargada. Evite sobrecargarlas. Sobrecargarlas repetidamente puede provocar un deterioro en el rendimiento de la batería. No intente nunca cargar la batería con la polaridad invertida, podría hacer que la presión del gas dentro de la batería se hinche y provoque fugas. Para el almacenamiento a corto plazo, guarde las baterías en un lugar con poca humedad, sin gases corrosivos y con una temperatura de entre -20ºC y 45ºC. Almacenamiento a largo plazo: Guardar a una temperatura entre +10ºC y +30ºC.qsg_m9_113.indd 112 02.11.2011 09:59:54
113snom m9 Quick Start GuideESPAÑOLEliminación de las bateríasNo ponga las baterías en el fuego ni en un incinerador. ¡RIESGO DE EXPLOSIÓN!Las baterías defectuosas o gastadas no deben desecharse nunca con los residuos municipales. Devuelva las baterías viejas al proveedor de las baterías, un vendedor de baterías autorizado o unas instalaciones de recogida designadas. No incinere las baterías.liMpieZaUse una gamuza antiestática. Evite usar agua y productos de limpieza líquidos o sólidos, podrían dañar la superficie o la electrónica interna de la base, el cargador y el teléfono.eliMinaciÓnEliminación del teléfonoEste teléfono está sujeto a la Directriz Europea 2002/96/EC, y no puede ser eliminado con los residuos domésticos generales.Si no sabe dónde puede desechar el dispositivo al final de su vida útil, contacte con su municipio, su proveedor de gestión de residuos local, o su vendedor.Eliminación del batería La batería está sujeto a la Directriz Europea 2006/66/EC, y no puede ser eliminado con los residuos domésticos generalesSi no sabe dónde puede desechar la batería al final de su vida útil, contacte con su municipio, su proveedor de gestión de residuos local, o su vendedor.Para países fuera de la Unión Europea:La eliminación de productos eléctricos y electrónicos en países fuera de la Unión Europea debe realizarse de acuerdo con las normativas locales. Contacte con su autoridad local para más información.qsg_m9_113.indd 113 02.11.2011 09:59:55
114snom m9 Quick Start GuideESPAÑOLinstalaciÓnAntes del primer uso debe cargarse totalmente la batería del teléfono. Esto tomará aproximadamente 8 horas.preparaciÓn del unidad1. Levante la tapa de la batería. 2. Introduzca el paquete de baterías con los electrodos en la esquina superior izquierda. Vuelva a colocar la tapa.3. Conecte la alimentación (5,9 V) del cargador a la toma de corriente y luego al cargador, y ponga el teléfono en el cargador. 3.1. 2.snom rechargeableLithium-Ionbattery estaciÓn Base1. Cuando el teléfono esté listo para el uso, conecte un extremo del cable de red con el puerto NET de la parte posterior de la estación base y el otro extremo a un puerto LAN de su red (switch, router, etc.).2. Conecte el convertidor de alimentación (5 V) a la toma de corriente primero, y luego a la estación base.NETRESET 5V DCNET5V DCConexión dela alimentaciónBotón reiniciar Puerto rete3. El indicador de encendido se activará y la estación base comenzará a arrancar.qsg_m9_113.indd 114 02.11.2011 09:59:57
115snom m9 Quick Start GuideESPAÑOL4. Cuando haya arrancado la estación base, el LED “Llamada” comenzará a parpadear, indicando que la estación base está esperando al registro dela unidad.LED de encendido – se enciende cuando está encendidoLED de llamada – parpadea durante la actualización del firmware – se enciende con una llamada en curso – parpadea lentamente cuando espera a registros della unidadLED de registro – se enciende al registrar la estación baseLED de red – parpadea durante el arranque, indicando que la estación base ha recibido una dirección IPresuMen dela unidad Vista lateralClip para cinturónTecla de ajuste de volumen +-Ajustar volumen• del timbre al sonar una llamada• del altavoz durante una llamadaCasquillo Headset 2,5 mm Tecla de altavoz (encendido/apagado)Vista trasera Altavoz dela unidad Tapa de bateríaqsg_m9_113.indd 115 02.11.2011 10:00:00
116snom m9 Quick Start GuideESPAÑOLVista delanteraTecla de navegación El modo inactivo, pulse el borde superior/inferior/derecho/izquierdo (indicado en la guía con ///) o el botón central () para abrir los siguientes menús o funciones:Menú principalDirectorioIntercomMenú AjustesMenú PreferenciasEn otros contextos, pulse  o  tpara navegar pos los menús y listas.Tecla verde dela unidadAceptar llamadasMarcar númeroConfirmar accionesTecla de función izquierdaEn modo inactivo: Listas de llamadasTecla de función derechaEn modo inactivo: RSS LectorTecla roja dela unidad Terminar llamadasCancelar accionesAlimentaciónon/offAuricularPantalla a colorTeclado alfanuméricoTecla R Bloquear + desbloquear tecladoTecla en estrellaCambiar modo de entrada (números, minúsculas+ mayúsculas)qsg_m9_113.indd 116 02.11.2011 10:00:01
117snom m9 Quick Start GuideESPAÑOLestructura de pantalla, pantalla inactiVa Estado de carga de bateríaRojo=críticoAmarillo=menos de 50%Verde=sobre de 50%MenÚPreferenciasRSS Lector Línea de teclas de funcióncon símbolos contextualesHora y fechaCuenta VoIP:Listas de llamadas:PerdidasRecibidasMarcadasPotencia de señal: Alta=verde Baja=gris Línea de estado registro dela unidad1. Pulse (tecla roja del teléfono). La pantalla mostrará: “Buscando base". Cuando la unidad haya encontrado la estación base, mostrará la indicación de PIN.2. Introduzca el PIN por defecto "0000".3. Pulse "OK".Nota: Si la unidad no se registra automáticamente, puede realizarse un registro manual. Pulse "->" para acceder al menú Ajustes. Acceda al menú dela unidad y pulse "Register Handset". Seleccione "Base 1". Introduzca el PIN y pulse "OK" para registrar la unidad.4. Cuando se haya registrado el teléfono con la base, la pantalla mostrará: qsg_m9_113.indd 117 02.11.2011 10:00:02
118snom m9 Quick Start GuideESPAÑOLConfiguración de una cuenta VoIP1. Pulse  y  en la tecla de navegación y "OK". La página --Network-- con la dirección IP de la estación base se mostrará en la pantalla. Apúntela.2. Pulse  en la tecla de navigación. La página --Handset-- se mostrará en la pantalla. Anote il "Handset ID", por ejemplo 00FEA101C0 (sin "h" final, si presente).3. Abra una ventana del navegador, teclee http://<IP address> en la barra de dirección, y pulse ENTER para abrir la interfaz web de la estación base. Username (nombre de usuario) por defecto: admin Password (contraseña) por defecto: password4. Haga clic sobre "Identity 1" en el menú de la izquierda.5. Introduzca la información de la cuenta SIP que recibió de su administrador de sistema o proveedor de VoIP.Account = cuenta Password = contraseñaAuthentication Name = nombre autenticaciónMailbox = cuenta de buzon de voz Display name = Nombre o número de libre elección6. Haga clic en la pestaña "Handsets". 7. Seleccione el número ID de la unidad en el menú desplegable de "Handset ID (IPUI)". Haga clic sobre "Save".8. Su snom m9 está listo para el uso.qsg_m9_113.indd 118 02.11.2011 10:00:02
119snom m9 Quick Start GuideESPAÑOLlos MenÚs del telÉfono1. Pulse el centro dela tecla de navegación para abrir el menú superior.AjustesNombre del elemento resaltado en el menúFunción actual de la tecla de función debajoDirectorioPreferenciasAlarmaHerramientasIntercom2. Pulse el borde superior/inferior/derecho/izquierdo dela tecla de navegación (indicado en la guía por ) para navegar por la pantalla.Pulse la tecla de función "OK" para abrir el submenú/función. Pulse la tecla de función "Cancel" para volver a la pantalla inactiva.directorio Use  para seleccionar una entrada existente o <Nuovo Ingresso>. Nuovo Ingresso: Siga las indicaciones para introducir el nombre y el número y seleccione el timbre. Pulse "OK".Pulse (tecla verde del teléfono) para marcar el número, pulse para salir del directorio.herraMientasCronómetro, Calculadora, Bloc de Notas, Calendario, RSS Lector, Correo de voz (escuchar mensajes de su buzón de voz)qsg_m9_113.indd 119 02.11.2011 10:00:03
120snom m9 Quick Start GuideESPAÑOLMenÚ aJustesFecha/Hora Red UnidadZona horariaServidor de horaFormatoFormato fechaFormato horaVLANDHCPRegistrar unidadSeleccionar baseDesregistrar unidadReajustar unidadActualización FWVersiónReajustar baseVoIPNombre displayCuentaContraseñaBuzón de vozServidor SIPOutbound ProxyCambio de PINNuevo PIN:Estatus de sistemaDirección IP, dirección MAC, version firmware, identificación de la base + del unidadalarMaActivar | Hora | MelodíaintercoMLlamar a todos: Llamar a todos unidades (registrados en la misma estación base)Llamar a unidad: Llamar a unidad seleccionada (registrados en la misma estación base) qsg_m9_113.indd 120 02.11.2011 10:00:04
121snom m9 Quick Start GuideESPAÑOLMenÚ preferencias“OK” > Selec-cione idioma con  y pulse “OK” IdiomaSeleccione con  y pulse “OK” Auto con-testadoPantallaSalva pantallaTapizContrasteRetro-iluminaciónLas llamadas entrantes no suenanNo molestarSeleccione la condición para lareenvio de llamadas y pulse “OK” Seleccione el número de teléfono dedestino y pulse “OK”Ajuste audioAjustes de timbradoLlam. internas* Llam. externas Tonos teclasTonos de cargadoBatería bajaMensaje nuevoTono de confirmaciónTonos de avviso Seleccione melodía y volu-men con  y pulse “OK”Seleccione “Activar” con  y pulse “OK” * Llamadas internas: De otros teléfonos registrados en la misma estación base SiempreReenvio de llamada NuncaOcupadoTiempo adotado/sec.Dirección SIPuso del telÉfonoMake and answer callsRealizar una llamada: Introduzca el número > pulse "OK" o Responder a una llamada: Pulse Terminar llamada: Pulse RemarcaciónPulse > seleccione el número > pulse o "OK"Reenvio de llamadasPreferencias > Reenvío de llamadas > teclear PIN > pulse OK > seleccionar identidad > seleccionar condición (siempre, ocupado, qsg_m9_113.indd 121 02.11.2011 10:00:05
122snom m9 Quick Start GuideESPAÑOLtiempo agotado) > seleccionar dirección SIP > teclear número de teléfono de destino > pulse OK > en la requerimiento pulse "Si" para reiniciar el unidadApagar el reenvío de llamadas: Preferencias > Reenvío de llamadas > teclear PIN > OK > seleccionar identidad > seleccionar condición "Nunca"Poner en espera y continuarPoner llamada en espera: Pulse Opciones > En esperaRecuperar llamada: Pulsar Opciones > RecuperarTransferir llamadaCon la llamada activa, pulse Opciones > Transferir > teclear número > pulse OKMiscelÁneaBuscar dirección MAC (=número de serie) de la estación base:Pulse  y  en la tecla de navegación y "OK" (Ajustes > Estaus de sistema > Red)Buscar dirección IP de la estación base:Pulse  y  en la tecla de navegación y "OK" (Ajustes > Estaus de sistema > Red)Abra la interfaz web de la estación base:Teclar la dirección IP en la barra de dirección del navegador y pulse ENTERReiniciar la estación base: Menú “Ajustes” > Unidad > Reiniciar base > “OK” oPulse la tecla “Reset” en la parte posterior de la estación base.qsg_m9_113.indd 122 02.11.2011 10:00:05
123snom m9 Quick Start GuideESPAÑOLReiniciar unidad:Menú “Ajustes” > Unidad > Reiniciar unidad > “OK”qsg_m9_113.indd 123 02.11.2011 10:00:05
AAPPENDIX · ANHANG · ANNEXE · APENDICE · ANEXO124 COPYRIGHT NOTICE AND WARRANTY DISCLAIMER I. Das Produkt enthält Software, die unter der GNU General Public License, Version 2, frei genutzt werden darf.This Product contains Software applicable to GNU General Public License, Version 2 which can be used freely.II. Im Verhältnis zu den Lizenzgebern der Software gilt der folgende Haftungsausschluss:This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.Towards the licensor of this Software the following liability is disclaimed:This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.III.Der Lizenztext der GPL lautet wie folgt:The GNU General Public License is as follows: qsg_m9_113.indd 124 02.11.2011 10:00:05
Asnom m9 Quick Start Guide125 gnu general puBlic licenseVersion 2, June 1991Copyright (C) 1989, 1991Free Software Foundation, Inc.59 Temple Place, Suite 330 Boston, MA 02111-1307, USAEveryone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.PreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation‘s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.qsg_m9_113.indd 125 02.11.2011 10:00:05
AAPPENDIX · ANHANG · ANNEXE · APENDICE · ANEXO126We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.Also, for each author‘s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors‘ reputations.Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone‘s free use or not licensed at all.The precise terms and conditions for copying, distribution and modification follow.GNU GENERAL PUBLIC LICENSETERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The „Program“, below, refers to any such program or work, and a „work based on the Program“ means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term „modification“.) Each licensee is addressed as „you“.Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.1.You may copy and distribute verbatim copies of the Program‘s source code as you receive it, in any medium, provided that you conspicuously qsg_m9_113.indd 126 02.11.2011 10:00:06
Asnom m9 Quick Start Guide127and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)These requirements apply to the modified work as a whole. If identifi-able sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the qsg_m9_113.indd 127 02.11.2011 10:00:06
AAPPENDIX · ANHANG · ANNEXE · APENDICE · ANEXO128right to control the distribution of derivative or collective works based on the Program.In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.4. You may not copy, modify, sublicense, or distribute the Program except qsg_m9_113.indd 128 02.11.2011 10:00:06
Asnom m9 Quick Start Guide129as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients‘ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consis-tent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a qsg_m9_113.indd 129 02.11.2011 10:00:06
AAPPENDIX · ANHANG · ANNEXE · APENDICE · ANEXO130licensee cannot impose that choice.This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and „any later version“, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.NO WARRANTY11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM „AS IS“ WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.qsg_m9_113.indd 130 02.11.2011 10:00:06
Asnom m9 Quick Start Guide13112. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONSHow to Apply These Terms to Your New ProgramsIf you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the „copyright“ line and a pointer to where the full notice is found.<one line to give the program‘s name and a brief idea of what it does>Copyright (C) <year> <name of author>This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USAqsg_m9_113.indd 131 02.11.2011 10:00:06
AAPPENDIX · ANHANG · ANNEXE · APENDICE · ANEXO132IV.Den vollständigen korrespondierenden Sourcecode der Software schickt Ihnen die snom technology AG auf Nachfrage gerne auf einem üblichen Datenträger gegen Erstattung der Herstellungskosten in Höhe von EUR 5,- zu.Der vollständige korrespondierende Sourcecode kann auch über unsere Website unter http://www.snom.com/gpl_.html?&L=0 herunter geladen werden. If requested by you, the complete corresponding source code of the Software can be sent by snom technology AG on a standard data storage medium against the reimbursement of the manufacturing costs of EUR 5.- per unit.The complete corresponding source code of the Software can also be downloaded from our web site http://www.snom.com/gpl_.html?&L=0. V.Weitere Informationen finden Sie auch unter http://www.snom.com. For further information see http://www.snom.com.qsg_m9_113.indd 132 02.11.2011 10:00:06
133qsg_m9_113.indd 133 02.11.2011 10:00:06

Navigation menu