SolaX Power Network Technology POCKETWIFI Pocket Wifi User Manual 614 00214 00

Download:
Mirror Download [FCC.gov]
Document ID	3499979
Application ID	Zu/HBfnn6gkMuK6xWcIJWw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	303.24kB (3790477 bits)
Date Submitted	2017-08-08 00:00:00
Date Available	2017-08-08 00:00:00
Creation Date	2017-10-21 19:39:18
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-21 19:39:18
Document Title	614.00214.00.cdr
Document Creator	CorelDRAW X7
Document Author:	chenyongkai

Description
REV.
0.0
REV.
Description
360.00 mm
首次发行
60.00 mm
张一丹 2017/6/6
增加FCC Caution
100.00 mm
0.0
张一丹 2017/6/16
A增加RF power
0.0
张一丹 2017/7/27
如图折叠出货
技术要求：
1.材质为80g铜版纸，所有页彩色打印，正反打印
2.如图示折叠出货，要求折叠对齐，折痕平滑
3.未注尺寸公差按 +- 1mm
品名
Pocket wifi 2.0说明书英文版Solax
4.图面、字体印刷清晰、无毛边、不起边、油墨不脱落
浙江艾罗网络能源技术有限公司
5.字体颜色为PANTONE Black C，无边框，底色为白色
6.符合RoHS要求
料号
614.00214.00
SolaX Power Co.,Ltd.
单位
页次
Q-OP-SC-01-02 V1.0
品名 Pocket wifi 2.0说明书英文版Solax
铜版纸
材料
料号
单位
614.00214.00
页次
设计
张一丹
2017/6/6
审核
朱 梦莹
2017/6/6
核准
朱娴红
2017/6/6
浙江艾罗网络能源技术有限公司
Installation
Enter setting page.
Screw it tightly.
DHCP
静态IP
固件版本号: 1.0
MAC地址: C8-93-46-CF-22-BB
S N : HG6ULNYX
Cut off all power of inverter before installation!
Wait for 5 minutes after power off.
IP地址: 192.168.2.213
SSID : solaxpower1
Find AP
Key :
Plug Pocket Wi 2.0 into “Wi ” port at the bottom of
inverter.
save
Update firmware:
浏览... Upload
5.2
Pocket Wifi 2.0
5.1
5.3
5.4 Make sure save con guration has done.
Save
Config
Done!
Please
wait
15
seconds!!!Return
User Manual
Power inverter on, then set the wi .
Step1: Use a laptop/smartphone to search for WIFI
signal from the inverter.
(The SSID : Solax_xxxxxxxx)
Step2: Connect to WIFI signal .
Step3:Open a browser(IE, Firefox, Chrome) and
type in: http://5.8.8.8/.
Step4:Type in username and password.
(username: admin, password: admin)
Step5:Enter setting page.
5.1Connect to home router by clicking "Find AP"
or manually input home router’s SSID.
5.2 Input password of home router as "key".
5.3 Click "Save".
Please read this user manual carefully before use.
01
02
Notes and troubleshooting for WIFI setting!
Notes
The signal strength will be affected by barriers between
inverter and home router. Please keep the distance
between inverter and home router within 10 meters
(open space).
SolaX suggests that smartphone is more suitable than
computer to do WIFI setting.
Please make sure that home router is under normal
working condition. Any problems of router may cause
wi setting failure. ( The home router should support
802.11b/g/n. )
Troubleshooting
Wi signal is too weak to connect when searching it by
smartphone.
Please check the wi module has been installed tightly
and shorten the distance between operator and wi
module.
03
Browser shows “ This page can not be displayed” after
typing http://5.8.8.8/.
Please use smartphone to do this step instead of laptop.
After clicking Save& Reboot and entering IP Address
page, the IP address shows all “0".
It means the wi setting is failed.
Please check the signal strength of home router.
( strength of signal must be over 3 bar )
Check SSID and password again.
Check whether home router is under normal working
condition.
FCC Caution
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
§ 15.21 Information to user.
Any Changes or modi cations not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reason able protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
-RF output power(ERP/EIRP) : 11b: 18.4dBm 11g: 14.6dBm 11n20: 14.6 dBm
-Frequency band (MHz) : 2412-2472
-Modulation : DSSS/OFDM
04
www.solaxpower.com
614.00214.00
Registration on Monitoring website.
Step1: Con rm wi con guration has done
successfully, and make sure Internet service is
accessable on the laptop or smartphone.
Step4: Fill up station information on the “Add power
station” pop-up window. The options with “*“
must be lled, then mark you site on the map.
Click “Complete”.
Click overview page, user can monitor inverter
and check the data.
Step2: Input “https://www.solaxcloud.com” on web
browser.
Introduction
Safety Instructions
Warranty Registration Form
Pocket Wi 2.0 makes the long-term monitoring of PV
systems feasible and efficient by collecting information
from inverter including status, performance and
updating information to monitoring website.
Before installation, all power of inverter must be cut off.
Keep away from ammable, explosive materials.
Do not dismantle or scrap by force.
Children should be supervised to ensure that they do
not play with this appliance.
Please retain this page as proof of your purchase and
your guarantee.
Quick installation with "Plug & Play" function
IP 65 dust prevention water proo ng designs
Stable data transmission and good reliability
Low pro le and nice exterior
Step3: Click “Sign up” as shown below.
Appearance and Demission
Fill up all information shown on sign up page,
then click "Save". The registration is completed.
(SN number shows on label )
Add a new site —click "Add" under the option “Site”
on the menu bar and the setting page is similar to
“Add power station” page.
Step5: Input user name, password and veri cation code,
then click “Login”.
06
07
24.50mm
Country
Warranty Regulation and Liability
Phone Number
Zip Code
Terms and conditions
Email
SolaX grants a warranty of 12 months as standard.
Starting from the date of the purchase invoice marked.
SolaX will only perform warranty service when the
faulty unit is returned to SolaX together with a copy
of invoice and warranty card which were issued by
the dealer to the users. In addition, the type label of
the unit must be fully legible. If these requirements
are not ful lled, Suntellite reserves the right to deny
warranty service.
Address
Product Serial Number
Date of Commissioning
Installation Company Name
Exclusion of liability
Technical Data
Product Name
Model
Supply Voltage
Frequency
Add a new inverter on a site—Choose site and click " ",
input registration number, then click "Save" to nish.
05
40.00mm
82.00mm
Make sure the power stations has been added
successfully.
Notes: Pocket Wi 2.0 will upload the SN number of
matching inverter automatically after powering
the inverter on.
Click Inverters on the menu bar, user can check
if Pocket Wi 2.0 is online with Online Status.
For furture use
Name
Antenna Gain
Interface
Protocol
Wireless mode
Degree of protection
Demission
Weight
Pocket Wi
Pocket Wi 2.0
+3.3 V
2.400~2.472GHz
3dB
UART/USART
TTL
802.11b/g/n
IP 65
82 40 24.5mm
<35g
08
Warranty claims are excluded for direct or indirect
damage due to:
1: Use of unit in ways not intended, improper
installation and installation that does not
comply with standards, improper operation
and unauthorized modi cation to the units or
repair attempts.
2: Without warranty card and serial number.
3: Operating the units with defective protective
equipment.
4: In uence of foreign objects and force majeure.
5: Inadequate ventilation.
6: Non-observance to relevant safety instructions.
09
Date of Delivery
Signature
To register your SolaX product, please mail this warranty card to:
ADD: Room 220, West Buliding A Sci. and Tech Park of
Zhejiang University No.525, Xixi Road, Hangzhou
Zhejiang Province, China 310007
Tel: +86 571 56260011
Fax: +86 571 56075753
Email: service@solaxpower.com
Web: http://www.solaxpower.com/
Online warranty registration is available at
http://www.solaxpower.com/en/warranty-registration/
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Warning                         : Invalid xref table

EXIF Metadata provided by EXIF.tools