8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 54543 |
| Application ID | UThlYJFMrTgEevDiw7VdIg== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 3.12kB (39011 bits) |
| Date Submitted | 1999-08-17 00:00:00 |
| Date Available | 1998-09-15 00:00:00 |
| Creation Date | 2001-06-01 18:26:11 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-01 18:26:14 |
| Document Title | 54543.pdf |
| Document Author: | jsoscia |
FCC ID: KA324WAN1 Page 27(i) Information to the user The ABZOO-E features software codeveloped with Cisco Systems, Inc, Cisco Systems requires that the following disclaimer be furnished with Solectek products that are codeveloped with Cisco Systems, lnc : Cisco Systems. Inc, makes no representations or warranties with respect to any AlRLAN product. and specifically disclaims any express or implied warranties for any particular purpose. Further. Cisco Systems Inc. makes no representations or warranties with respect to the contents or use ofthis manual. and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose, Further, Cisco Systems‘ Inc, reserves the right to make changes to any and all parts ofthe (Cisco Systems) product, at any time. without obligation to notify any person or entity of such changes The Airlan bridge operates in the 2.4 GHz band and complies with the IEEE 802.1D MAC bridging standard. It supports SNMP monitoring if IP routing is enabled, Federal Communications Commission (FCC) Radio Frequency Interference Statement This device complies with Part 15 ofFCC Rules. Operation ofthis device is subject to the following two conditions: a It may not cause harmful interference. ' lt must accept any interference that may cause undesired operation. FCC RF exposure regulations require that a minimum of30 inches of separation exist between an operating antenna and any person. When installing the antenna, ensure that this clearance is maintained while the product is in operation This device must be installed and used in strict accordance with the manufacturer's instructions. However, there is no guarantee that interference to radio communications will not occur in a particular commercial installation. In case the device does cause harmful interference with an authorized radio service. the user/operator shall promptly stop operating the device until harmful interference has been limited Solectek Corporation is not responsible for any radio or television interference caused by unauthorized modification ofthis device or the substitution or attachment of connecting cables and equipment other than specified by Solectek Corporation. The correction of interference caused by such unauthorized modification, substitution, or attachment Will be the responsibility of the user. Steps for minimizing or eliminating radio and television interference: - Change the channel - Reorient the radio or TV receivmg antenna - Relocate the computer and bridge unit with respect to the receiver. - Plug the computer and bridge into a different outlet so the computer and bridge are on different branch circuits. if necessary. you should consult the dealer or an experienced radio/TV technician for additional suggestions. You may find the booklet called “How to Identify and Resolve Radio-TV lnterference Problems" prepared by the OLECTE
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:06:01 18:26:11 Producer : Acrobat Distiller 4.0 for Windows Author : jsoscia Title : 54543.pdf Modify Date : 2001:06:01 18:26:14-04:00 Page Count : 1EXIF Metadata provided by EXIF.tools