Sonic Innovations AUBTEP Hearing Instrument amplifier User Manual InstallationInstructions

Download:
Mirror Download [FCC.gov]
Document ID	3406694
Application ID	nqSwHnsAQ9k69Sx8wQE5vQ==
Document Description	InstallationInstructions.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.56kB (1007039 bits)
Date Submitted	2017-05-29 00:00:00
Date Available	2017-05-29 00:00:00
Creation Date	2017-05-22 15:26:41
Producing Software	Microsoft: Print To PDF
Document Lastmod	2017-05-22 15:26:41
Document Title	Microsoft Word - Radio Model Installation JP-Guide - Sonic Enchant BTE105
Document Author:	pkni

Oticon Radio Model - Quick Installation Guide
Radio Model Name:
Aurora BTE power
The Aurora BTE power radio model contains two radio transceivers running at 3.84 MHz and 2.4 GHz and both implemented on a single hardware platform.
The radio model is implemented in an engine module mounted on the
main PCB with connections to the antennas, the microphones, the speaker
and the battery terminals. The radio model can be seen in 3D overview to
the left:
The 3.84 MHz radio is a low power, short range, and inductive radio
transceiver working at a single channel at 3.84 MHz using MSK
modulation with 320 kbit/s data rate and connected to a small coil
antenna. The 2.4 GHz radio is a Bluetooth Low Energy (BLE)
transceiver using GFSK modulation with 1 Mbit/s data rate also capable
of proprietary modes with higher data rates and connected to a short PCB
antenna.
Aurora BTE power Radio Model – 3D overview
Sonic Innovation Inc.
2501 Cottontail Lane
Somerset, NJ 08873
United States of America
Phone: +41 31 560 2125
www.sonici.com
Oticon Radio Model - Quick Installation Guide
Radio Model Name:
Aurora BTE power
Below the main flex PCB of the Aurora BTE power radio model with the most important electrical and electro-mechanical components can be seen:
Aurora BTE power Radio Model – Main PCB – Top side
The most important part of the radio model is the Engine Module mounted on the main flex PCB, which connects it to both the EEPROM memory and all external
connections: On the top side, these are the microphones, the battery terminals, the external connector and the push button.
The Aurora BTE power radio model requires only a single cell battery and an external speaker to be attached and plastic shells, defining the industrial design
of a hearing aid end product and holding everything together, in order to be operational.
Sonic Innovation Inc.
2501 Cottontail Lane
Somerset, NJ 08873
United States of America
Phone: +41 31 560 2125
www.sonici.com
Oticon Radio Model - Quick Installation Guide
Radio Model Name:
Aurora BTE power
On the bottom, side of the main PCB of the Aurora BTE power radio model the connector for the speaker unit assembly (where the wire antenna for the Bluetooth
radio is an integrated part), the programming connector, and EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
Aurora BTE power Radio Model – Main PCB – Bottom side
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF chip
for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The Aurora BTE power radio model also includes all voltage
regulators and buffered data programming inputs on-board. The DSP is the main processor controlling the functionality of both radios in the Aurora BTE power
radio model.
The Aurora BTE power radio model is intended to be installed in Oticon, Bernafon, Sonic and affiliated wireless hearing aid devices of the BTE power (Receiver-InThe-Ear) wearing style.
Sonic Innovation Inc.
2501 Cottontail Lane
Somerset, NJ 08873
United States of America
Phone: +41 31 560 2125
www.sonici.com
Oticon Radio Model - Regulatory Label Information for USA & Canada
Radio Model Name:
Contains:
FCC ID:
IC:
Aurora BTE power
ZTOAUBTEP
9799A-AUBTEP
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 and RSS-247 of Industry Canada.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Oticon A/S may void the FCC authorization to operate this equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1)
l'appareil ne doit pas produire de brouillage, et
(2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Sonic Innovation Inc.
2501 Cottontail Lane
Somerset, NJ 08873
United States of America
Phone: +41 31 560 2125
www.sonici.com
Oticon Radio Model - Regulatory Label Information for Japan
Radio Model Name:
Aurora BTE power
Description:
Radio module with 2.4 GHz low power transceiver to be integrated into Oticon, Bernafon, Sonic
hearing instruments and associated devices.
Regulatory label:
NB: The
NB: The regulatory label for Japan is also
included in the IFU for Japan.
This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business
Law (電気通信事業法) under the grant ID n° 認証番号: 202-LSE124
This device should not be modified (otherwise, the granted designation number will become invalid)
本製品の改造は禁止されています。（適合証明番号などが無効となります。）
NB: The regulatory label is not shown on the radio module itself or any end products with it, since they are too small for
the label to be readable without any optical aids or magnification. Below the radio module is shown on mm paper,
indicating a size of about 7x10x31 mm.
Radio module from the side
Sonic Innovation Inc.
2501 Cottontail Lane
Somerset, NJ 08873
United States of America
Phone: +41 31 560 2125
www.sonici.com
Radio module from the top side (button side)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (90 0 obj) not found at 1004904

EXIF Metadata provided by EXIF.tools