Sonic Innovations FU2BTEPP hearing instrument with short range low power wireless radio User Manual COMPANY LETTER HEAD

Download:
Mirror Download [FCC.gov]
Document ID	2676499
Application ID	p7Q06PzJriTCcjEqtvkGTg==
Document Description	InstallationGuide.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.75kB (146847 bits)
Date Submitted	2015-07-13 00:00:00
Date Available	2015-10-02 00:00:00
Creation Date	2017-09-24 15:53:37
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-24 15:53:37
Document Title	< COMPANY LETTER HEAD>
Document Creator	Acrobat PDFMaker 11 for Word
Document Author:	PC-8726

Sonic Radio Model - Quick Installation Guide
Radio Model Name:
Fusion 2 BTE13PP
The Fusion 2 BTE13PP radio model is a low power, short range, inductive radio transceiver working at 3.84 MHz. It can be seen below:
Fusion 2 BTE13PP Radio Model – Top Side
The most important parts of the radio module are a Digital-Signal-Processor (DSP), a radio Front-End (FE), an EEPROM memory, a telecoil and an antenna coil –
all mounted on the same main flex PCB. On the top side besides the radio Front-End, EEPROM and telecoil, also switches for user inter action (e.g. volume
control), two microphones, a programming plug and pads for connecting the battery can be seen. The radio model is intended to be installed in Oticon, Bernafon,
Sonic and affiliated wireless hearing aid devices of the BTE (Behind-The-Ear) PP (Power Plus) or P wearing styles.
Sonic Innovations Inc.
Somerset, NJ 08873
2501 Cottontail Lane
United States (USA)
Phone: +1 888 423 7834
www.sonici.com
Sonic Radio Model - Quick Installation Guide
Radio Model Name:
Fusion 2 BTE13PP
The DSP is the main processor controlling the functionality of the amplifier and the FE is a complete radio transceiver, including both transmitter, receiver and
local oscillators. The Fusion 2 BTE13PP radio module also includes all voltage regulators inside the DSP and FE and buffered data programming inputs
(PC_DATA and PC_CLOCK) on board.
Fusion 2 BTE13PP Radio Model – Bottom Side
On the bottom side of the radio model the DSP, the antenna coil and pads for connecting the audio receiver can be seen.
The module only requires a single cell battery and an external audio receiver (speaker) to be attached and plastic shells holding everything together in order to be
operational.
Sonic Innovations Inc.
Somerset, NJ 08873
2501 Cottontail Lane
United States (USA)
Phone: +1 888 423 7834
www.sonici.com
Sonic Radio Model - Regulatory Label Information
Radio Model Name:
Fusion 2 BTE13PP
Contains:
ZTOFU2BTEPP
9799A-FU2BTEPP
FCC ID:
IC:
NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Sonic Innovations Inc. may void the FCC authorization to operate this
equipment.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1)
l'appareil ne doit pas produire de brouillage, et
(2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Sonic Innovations Inc.
Somerset, NJ 08873
2501 Cottontail Lane
United States (USA)
Phone: +1 888 423 7834
www.sonici.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Author                          : PC-8726
Create Date                     : 2015:07:09 14:49:18+02:00
Modify Date                     : 2015:07:13 08:10:42+02:00
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:07:13 08:10:42+02:00
Creator Tool                    : Acrobat PDFMaker 11 for Word
Document ID                     : uuid:d22fb8dd-37f4-41cf-bdd1-cbea7a0b63a0
Instance ID                     : uuid:d98f8202-dce8-4ac8-b414-f462f48d9e64
Format                          : application/pdf
Title                           : < COMPANY LETTER HEAD>
Description                     : 
Creator                         : PC-8726
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Source Modified                 : D:20150709123256
Company                         : Cetecom
Page Layout                     : OneColumn
Page Count                      : 3

EXIF Metadata provided by EXIF.tools