Sonicwall 080 802.11 b/g/n Router User Manual TZ Setup Poster OUTSIDE

Download:
Mirror Download [FCC.gov]
Document ID	1109134
Application ID	vwz8/8Jna4DDyNa/xjnLFA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.16kB (552035 bits)
Date Submitted	2009-05-12 00:00:00
Date Available	2009-05-12 00:00:00
Creation Date	2009-04-16 19:00:13
Producing Software	Adobe PDF library 8.00
Document Lastmod	2009-05-12 09:26:44
Document Title	TZ_Setup_Poster_OUTSIDE
Document Creator	Adobe Illustrator CS3

SONICWALL TZ 100 / 200
Quick Start Guide / Comience rápidamente / Beginnen Sie schnell / 開始を迅速に
Your appliance must be registered prior to updating firmware!
El aparato debe estar registrado antes de la actualización de firmware!
Ihr Gerät muss vor der Aktualisierung der Firmware!
アプライアンスのファームウェアをアップデートする前に登録する必要があります！
Get the Latest Firmware
Navigate to  in your Web browser and login.
In the Download section, select your SonicWALL appliance from the Software Type list.
Download and save the firmware image to your local disk.
Log into your SonicWALL appliance  and navigate to the System
> Settings page.
Click the Upload New Firmware button and find the firmware image you downloaded from
MySonicWALL.com.
Boot your system to the new firmware image using the Boot icon in the Firmware Management list.
http://192.168.168.168/
Additional Support and Documentation
Both MySonicWALL.com and SonicWALL.com offer a wealth of documentation and support
options including the following documents related to your new product:
http://www.mysonicwall.com
TZ 100 / 200 Series Getting Started Guide
SonicOS Administrator’s Guide for the TZ 100 / 200 Series
Release Notes
Quick Tutorials and Training Videos
Network Threat Notices and Protection Options
Always visit MySonicWALL.com for most up-to-date source for product documentation and
firmware downloads.
Obtener la última firmware
Navegue hasta  en el navegador Web y de acceso.
En la sección de descargas, seleccione su dispositivo SonicWALL el Software de lista Tipo.
Descargar y guardar la imagen del firmware a su disco local.
Acceda a su dispositivo SonicWALL  y navegar al Sistema>
Configuración de página.
Haga clic en el botón Subir nuevo Firmware y encontrar la imagen del firmware que ha
descargado desde MySonicWALL.com.
Arrancar su sistema a la nueva imagen del firmware de arranque usando el icono en la lista
de gestión de firmware.
Holen Sie sich die neueste Firmware
Navigieren Sie zu  in Ihrem Web-Browser und Login.
Im Download-Bereich, wählen Sie Ihre SonicWALL-Appliance von der Software-Liste.
Downloaden und speichern Sie die Firmware-Image auf der lokalen Festplatte.
Melden Sie sich bei Ihrer SonicWALL Appliance  und navigieren
Sie zu dem System-> Einstellungen-Seite.
Klicken Sie auf die neue Firmware-Upload-Button und das Firmware-Image, das Sie
heruntergeladen MySonicWALL.com.
Starten Sie Ihr System auf die neue Firmware-Image mit der Boot-Symbol in der Liste der
Firmware-Management.
http://192.168.168.168/
最新のファームウェアを入手
ナビゲートし、Webブラウザからログインして 。
ダウンロードセクションでは、SonicWALLアプライアンスソフトウェアの種類]ボックスの一覧
から選択してください。
ダウンロードして、ローカルディスクには、
ファームウェアイメージを保存します。
あなたのSonicWALLアプライアンスにログインしますとシステムに
移動> [設定]ページをご覧ください。
ボタンをクリックしてアップロードしてMySonicWALL.comから新ファームウェアをダウンロー
ドしたファームウェアイメージして下さい。
新しいファームウェアイメージは、
ファームウェア管理リストの起動アイコンを使用してシステム
をブートします。
Safety Information / Sicherheit nformationen
Regulatory Model/Type Product Name
APL22-06F
TZ 200
APL22-070
TZ 200 Wireless
APL22-07F
TZ 100
APL22-080
TZ 100 Wireless
Mounting the SonicWALL
- Mount in a location away from direct sunlight and sources of heat.
- A maximum ambient temperature of 104º F (40º C) is recommended.
- Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and
broadband amplifiers.
- The included power cord is intended for use in North America only.For European Union (EU) customers, a power cord is not
included.
- Ensure that no water or excessive moisture can enter the unit.
- Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1 inch (25.44mm)
clearance is recommended.
- Consideration must be given to the connection of the equipment to the supply circuit and the effect of overloading the
circuits has minimal impact on overcurrent protection and supply wiring.
- Appropriate consideration of equipment nameplate ratings must be used when addressing this concern.
Lithium Battery Warning
The Lithium Battery used in the SonicWALL security appliance may not be replaced by the user. Return the SonicWALL
security appliance to a SonicWALL-authorized service center for replacement with the same or equivalent type recommended
by the manufacturer. If, for any reason, the battery or SonicWALL security appliance must be disposed of, do so following the
battery manufacturer's instructions.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not connect these
ports directly to communication wiring or other wiring that exits the building where the SonicWALL is located.
Power Supply Information
If the power supply is missing from your SonicWALL product package, please contact SonicWALL Technical Support at
408-752-7819 for a replacement. This product should only be used with a UL listed power supply marked “Class 2” or “LPS”,
with an output rated 12 VDC, minimum 1.5 A.
Weitere Hinweise zur Montage
- Wählen Sie für die Montage einen Ort, der keinem direkten Sonnenlicht ausgesetzt ist und sich nicht in der Nähe von
Wärmequellen befindet. Die Umgebungstemperatur darf nicht mehr als 40 °C betragen.
- Führen Sie die Kabel nicht entlang von Stromleitungen, Leuchtstoffröhren und Störquellen wie Funksendern oder
Breitbandverstärkern.
- Das beigefügte Netzkabel ist nur für den Betrieb in Nordamerika vergesehen. Für Kunden in der Europäischen Union ist kein
Kabel beigefügt.
- Stellen Sie sicher, dass das Gerät vor Wasser und hoher Luftfeuchtigkeit geschützt ist.
- Stellen Sie sicher, dass die Luft um das Gerät herum zirkulieren kann und die Lüftungsschlitze an der Seite des Gehäuses
frei sind. Hier ist ein Belüftungsabstand von mindestens 26 mm einzuhalten.
- Vergewissern Sie sich, dass das Gerät sicher im Rack befestigt ist.
Hinweis zur Lithiumbatterie
Die in der Internet Security Appliance von SonicWALL verwendete Lithiumbatterie darf nicht vom Benutzer ausgetauscht
werden. Zum Austauschen der Batterie muss die SonicWALL in ein von SonicWALL autorisiertes Service-Center gebracht
werden. Dort wird die Batterie durch denselben oder entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt.
Beachten Sie bei einer Entsorgung der Batterie oder der SonicWALL Internet Security Appliance die diesbezüglichen
Anweisungen des Herstellers.
Kabelverbindungen
Alle Ethernet- und RS232-C-Kabel eignen sich für die Verbindung von Geräten in Innenräumen. Schließen Sie an die
Anschlüsse der SonicWALL keine Kabel an, die aus dem Gebäude herausgeführt werden, in dem sich das Gerät befindet.
Informationen zur Stromversorgung
Sollte das Netzteil nicht im Lieferumfang der SonicWALL enthalten sein, wenden Sie sich diesbezüglich an den technischen
Support von SonicWALL (Tel.: +1-408-752-7819). Dieses Produkt darf nur in Verbindung mit einem nach den Normen der
Underwriter Laboratories, USA als „UL-gelistet“ zugelassenen Netzteil der Kategorie „Class 2“ oder „LPS“ verwendet werden.
Ausgang: 12 VDC Gleichsspannung, mind. 1,5 A.
Complies with EN55022 Class B and CISPR22 Class B.
Canadian Radio Frequency Emissions Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Network Security
SonicWALL TZ 100 / TZ 200
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
All products with country code “” (blank) and “A” are made in the USA.
All products with country code “B” are made in China.
All products with country code “C” or “D” are made in Taiwan R.O.C.
Quick Start Guide
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Comience rápidamente
Beginnen Sie schnell
開始を迅速に
WLAN / RLAN
2.4 GHz
Indoor Only
D'intérieur Seulement
Dell'interno Soltanto
De interior Solamente
Binnen slechts
Innen Nur
Indoor Somen te
This equipment may be operated in:
Betrieb dieser Ausrüstung wird innen erlaubt:
L'opération de cet équipement est permise dans:
AT
BE
CY
CZ
EE
FI
FR
DE
IE
IT
LT
LU
NO
PL
PT
SK
CH
GB
BG
GR
MT
RO
SI
SE
DK
HU
NL
ES
LV
Country and channel selection is made in software. Follow user documentation to make country and channel setting.
Land und Kanalauswahl sind in Software gemacht. Folgen Sie Verbraucherdokumentation, um Land und Kanal zu
machen, setzend.
La sélection de pays et canal est faite dans le logiciel. Suivez la documentation d'utilisateur pour faire le pays et la canal
sélection.
Copyright Notice
© 2009 SonicWALL, Inc.
All rights reserved.
DRAFT DOCUMENT
FOR BETA USE ONLY
DO NOT DISTRIBUTE
Under the copyright laws, this manual or the software described within, cannot be copied, in whole or
part, without the written consent of the manufacturer, except in the normal use of the software to make
a backup copy. The same proprietary and copyright notices must be affixed to any permitted copies as
were affixed to the original. This exception does not allow copies to be made for others, whether or not
sold, but all of the material purchased (with all backup copies) can be sold, given, or loaned to another
person. Under the law, copying includes translating into another language or format.
Specifications and descriptions subject to change without notice.
Trademarks SonicWALL is a registered trademark of SonicWALL, Inc.
Other product and company names mentioned herein may be trademarks and/or registered
trademarks of their respective companies and are the sole property of their respective manufacturers.
P/N 232-xxx-xxxx BETA 4/9/09
Safety Information / Sicherheit nformationen
Model
APL22-07F
APL22-06F
Product
TZ 100
TZ 200
Model
APL22-080
APL22-070
Product
TZ 100 Wireless
TZ 200 Wireless
Mounting the SonicWALL
- Mount in a location away from direct sunlight and sources of heat.
- A maximum ambient temperature of 104º F (40º C) is recommended.
- Route cables away from power lines, fluorescent lighting fixtures, and sources of noise such as radios, transmitters, and broadband amplifiers.
- The included power cord is intended for use in North America only. For European Union (EU) customers, a power cord is not included.
- Ensure that no water or excessive moisture can enter the unit.
- Allow unrestricted airflow around the unit and through the vents on the side of the unit. A minimum of 1 inch (25.44mm) clearance is recommended.
- Consideration must be given to the connection of the equipment to the supply circuit and the effect of overloading the circuits has minimal impact on
overcurrent protection and supply wiring.
- Appropriate consideration of equipment nameplate ratings must be used when addressing this concern.
Weitere Hinweise zur Montage
- Wählen Sie für die Montage einen Ort, der keinem direkten Sonnenlicht ausgesetzt ist und sich nicht in der Nähe von Wärmequellen befindet. Die
Umgebungstemperatur darf nicht mehr als 40 °C betragen .
- Führen Sie die Kabel nicht entlang von Stromleitungen, Leuchtstoffröhren und Störquellen wie Funksendern oder Breitbandverstärkern.
- Das beigefügte Netzkabel ist nur für den Betrieb in Nordamerika vergesehen. Für Kunden in der Europäischen Union ist kein Kabel beigefügt.
- Stellen Sie sicher, dass das Gerät vor Wasser und hoher Luftfeuchtigkeit geschützt ist.
- Stellen Sie sicher, dass die Luft um das Gerät herum zirkulieren kann und die Lüftungsschlitze an der Seite des Gehäuses frei sind. Hier ist ein
Belüftungsabstand von mindestens 26 mm einzuhalten.
- Vergewissern Sie sich, dass das Gerät sicher im Rack befestigt ist.
Lithium Battery Warning
The Lithium Battery used in the SonicWALL security appliance may not be replaced by the user. Return the SonicWALL security appliance to a SonicWALLauthorized service center for replacement with the same or equivalent type recommended by the manufacturer. If, for any reason, the battery or SonicWALL
security appliance must be disposed of, do so following the battery manufacturer's instructions.
Hinweis zur Lithiumbatterie
Die in der Internet Security Appliance von SonicWALL verwendete Lithiumbatterie darf nicht vom Benutzer ausgetauscht werden.
Zum Austauschen der Batterie muss die SonicWALL in ein von SonicWALL autorisiertes Service-Center gebracht werden. Dort
wird die Batterie durch denselben oder entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt. Beachten Sie bei einer
Entsorgung der Batterie oder der SonicWALL Internet Security Appliance die diesbezüglichen Anweisungen des Herstellers.
Cable Connections
All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not connect these ports directly to communication
wiring or other wiring that exits the building where the SonicWALL is located.
Kabelverbindungen
Alle Ethernet- und RS232-C-Kabel eignen sich für die Verbindung von Geräten in Innenräumen. Schließen Sie an die Anschlüsse der SonicWALL keine Kabel
an, die aus dem Gebäude herausgeführt werden, in dem sich das Gerät befindet.
Power Supply Information
If the power supply is missing from your SonicWALL product package, please contact SonicWALL Technical Support at 408-752-7819 for a replacement. This
product should only be used with a UL listed power supply marked “Class 2” or “LPS”, with an output rated 12 VDC, minimum 1.5 A.
Informationen zur Stromversorgung
Sollte das Netzteil nicht im Lieferumfang der SonicWALL enthalten sein, wenden Sie sich diesbezüglich an den technischen Support von SonicWALL (Tel.: +1408-752-7819). Dieses Produkt darf nur in Verbindung mit einem nach den Normen der Underwriter Laboratories, USA als „UL-gelistet“ zugelassenen Netzteil
der Kategorie „Class 2“ oder „LPS“ verwendet werden. Ausgang: 12 VDC Gleichsspannung, mind. 1,5 A
Information Specific authorization of
APL22-06F / TZ 200 and APL22-07F / TZ 100
NOTE: This equipment was tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try and correct the interference using one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from the receiver connection.
- Consult SonicWALL for assistance.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Complies with EN55022 Class B and CISPR22 Class B.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
EU Declaration of Conformity
Application of council Directive 2004/108/EC (EMC) and 2006/95/EC (LVD)
Standards to which conformity is declared
EN 55022 (2006) +A1 (2007) Class B
EN 55024 (1998) +A2(2003)
EN 61000-3-2 (2006)
EN 61000-3-3 (1995) +A2 (2005)
EN 60950-1 (2006)
National Deviations: AT, AU, BE, CH, CN, CZ, DE, DK, FI, FR, GB, GR,
HU, IE, IL, IN, IT, JP, KR, NL, NO, PL, SE, SG, SI
***Signed by John Gmuender, June1 2009
SWL-APL22-06F and SWL22-07F
All products with country code “” (blank) and “A” and “J” are made in the USA.
All products with country code “B” are made in China.
All products with country code “C” or “D” are made in Taiwan R.O.C
Information Specific to Wireless LAN authorization US and Canada
APL22-070 / TZ 200 Wireless and APL22-080 / TZ 100 Wireless
Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
RF Radiation Exposure Statement
This equipment complies with FCC and IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters (7.9 inches) between the radiator (antenna) and your body. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Antenna
This device has been designed to operate with an antennas having a maximum gain of 4 dBi. Antennas having a higher gain is strictly
prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that permitted for successful communication.
North American Authorized Channels
SonicWALL declares that the APL22-070 (FCC ID: QWU-070)
(IC: 4408A-070) and APL22-080 (FCC ID: QWU-080) (IC: 4408A-080) when sold in US or Canada is limited to CH1~CH11 by specified
firmware controlled in the USA.
For more information regarding the above statements, please contact SonicWALL, Inc. at:
1143 Borregas Avenue
Sunnyvale, CA, 94089-1306
1-408-745-9600
WLAN / RLAN
2.4 GHz
Indoor Only
D'intérieur Seulement
Dell'interno Soltanto
De interior Solamente
Binnen slechts
Innen Nur
Indoor Somen te
This equipment may be operated in:
Betrieb dieser Ausrüstung wird innen erlaubt:
L'opération de cet équipement est permise dans:
AT
EE
IE
NO
CH
MT
BE
FI
IT
PL
GB
RO
CY
FR
LT
PT
BG
SI
CZ
DE
LU
SK
GR
SE
DK
HU
NL
ES
LV
Country and channel selection is made in software. Follow user
documentation to make country and channel setting.
Land und Kanalauswahl sind in Software gemacht. Folgen Sie
Verbraucherdokumentation, um Land und Kanal zu machen,
setzend.
La sélection de pays et canal est faite dans le logiciel. Suivez la
documentation d'utilisateur pour faire le pays et la canal sélection.
全國通信委員會臺灣
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現
象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依
電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科
學及醫療用電波輻射性電機設備之干擾

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-701
Format                          : application/pdf
Title                           : TZ_Setup_Poster_OUTSIDE
Creator Tool                    : Adobe Illustrator CS3
Create Date                     : 2009:04:16 19:00:13-07:00
Modify Date                     : 2009:05:12 09:26:44+08:00
Metadata Date                   : 2009:05:12 09:26:44+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 80
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7671 bytes, use -b option to extract)
Document ID                     : uuid:708D539FA028DE11B08BC39EE408B8AB
Instance ID                     : uuid:e9a87b52-cc28-4b86-b349-6afd4a8f403c
Derived From Instance ID        : uuid:6F8D539FA028DE11B08BC39EE408B8AB
Derived From Document ID        : uuid:6E8D539FA028DE11B08BC39EE408B8AB
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : D:\Projects - SONARmedia\Print Projects\SonicWALL\TZ 200 Poster\images\msw_firmware_select.jpg, D:\Projects - SONARmedia\Print Projects\SonicWALL\TZ 200 Poster\images\msw_downloads.jpg, D:\Projects - SONARmedia\Print Projects\SonicWALL\TZ 200 Poster\images\system_settings_firmware.jpg, D:\Projects - SONARmedia\Print Projects\SonicWALL\TZ 200 Poster\images\system_settings_firmware.jpg, D:\Projects - SONARmedia\Print Projects\SonicWALL\TZ 200 Poster\images\system_settings_firmware.jpg
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 22.000000
Max Page Size H                 : 16.250000
Max Page Size Unit              : Inches
Font Name                       : ArialMT, Calibri, Myriad-Bold, Myriad-Roman, HelveticaNeueLTStd-Blk, HelveticaNeueLTStd-Roman, HelveticaNeueLTStd-Bd, HelveticaNeueLTStd-Md, HelveticaNeueLTStd-Lt, KozGoPro-Bold, KozGoPro-Regular, TimesNewRomanPSMT, MyriadPro-Regular, MyriadPro-Light, MyriadPro-Black
Font Family                     : Arial, Calibri, Myriad, Myriad, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, Helvetica Neue LT Std, 小塚ゴシック Pro, 小塚ゴシック Pro, Times New Roman, Myriad Pro, MyriadPro Light, MyriadPro Black
Font Face                       : Regular, Regular, Bold, Roman, 95 Black, 55 Roman, 75 Bold, 65 Medium, 45 Light, B, R, Regular, Regular, Light, Black
Font Type                       : Open Type, Open Type, Type 1, Type 1, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown, Unknown
Font Version                    : Version 3.00, Version 5.00, 001.000, 001.000, OTF 1.029;PS 001.004;Core 1.0.33;makeotf.lib1.4.1585, Version 1.047;PS 001.103;Core 1.0.38;makeotf.lib1.6.5960, OTF 1.029;PS 001.102;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, OTF 1.029;PS 001.002;Core 1.0.33;makeotf.lib1.4.1585, Version 4.001;PS 4;Core 1.0.38;makeotf.lib1.7.12746, Version 4.001;PS 4;Core 1.0.38;makeotf.lib1.7.12746, Version 3.00, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032, Version 2.007;PS 002.000;Core 1.0.38;makeotf.lib1.7.9032
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : ARIAL.TTF, calibri.ttf, wmb_____.pfb; wmb_____.pfm, wmr_____.pfb; wmr_____.pfm, HelveticaNeueLTStd-Blk.otf, HelveticaNeueLTStd-Roman.otf, HelveticaNeueLTStd-Bd.otf, HelveticaNeueLTStd-Md.otf, HelveticaNeueLTStd-Lt.otf, KozGoPro-Bold.otf, KozGoPro-Regular.otf, TIMES.TTF, MyriadPro-Regular.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 533 C, PANTONE 158 C, PANTONE 320 C, PANTONE 123 C, PANTONE 2915 C, PANTONE 200 C, PANTONE 339 C, PANTONE Cool Gray 5 CVC, PANTONE 659 C
Swatch Group Name               : Default Swatch Group, Chrome
Swatch Group Type               : 0, 1
Swatch Colorant Swatch Name     : White, Black, PANTONE 533 C, PANTONE 659 C, PANTONE Cool Gray 5 CVC, PANTONE 123 C, PANTONE 158 C, PANTONE 200 C, PANTONE 2915 C, PANTONE 320 C, PANTONE 339 C, R=11 G=44 B=61 1, R=30 G=30 B=30 1, R=50 G=50 B=50 1, R=71 G=71 B=71 1, R=93 G=94 B=96 1, R=48 G=63 B=141 1, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=78 1, C=0 M=0 Y=0 K=42 1, C=0 M=0 Y=0 K=26 1, C=0 M=0 Y=0 K=66 1, C=0 M=0 Y=0 K=10 1, C=0 M=0 Y=0 K=0
Swatch Colorant Mode            : RGB, RGB, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB, RGB
Swatch Colorant Type            : PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Red             : 255, 0, 11, 30, 50, 71, 93, 48, 35, 93, 163, 197, 116, 230, 255
Swatch Colorant Green           : 255, 0, 44, 30, 50, 71, 94, 63, 31, 94, 165, 198, 118, 231, 255
Swatch Colorant Blue            : 255, 0, 61, 30, 50, 71, 96, 141, 32, 96, 168, 200, 120, 232, 255
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Cyan            : 100.000000, 54.901999, 0.000000, 0.000000, 0.000000, 0.000000, 58.823502, 100.000000, 83.921599
Swatch Colorant Magenta         : 83.137298, 30.196100, 0.000000, 23.921600, 61.176503, 100.000000, 7.058800, 0.000000, 0.000000
Swatch Colorant Yellow          : 45.882401, 0.000000, 0.000000, 94.117600, 96.862698, 63.137299, 0.000000, 30.980399, 56.078398
Swatch Colorant Black           : 12.941200, 0.000000, 34.117600, 0.000000, 0.000000, 12.156900, 0.000000, 7.058800, 0.000000
Producer                        : Adobe PDF library 8.00
Has XFA                         : No
Page Count                      : 6
Creator                         : Adobe Illustrator CS3

EXIF Metadata provided by EXIF.tools