95740 29K IN
95740-29K-In 95740-29K-IN 95740-29K-IN 2685 instructions part uploads sonnax-dev
2015-06-24
: Sonnax 95740-29K-In 95740-29K-IN 1105 file instruction uploads
Open the PDF directly: View PDF 
.
Page Count: 1
1. Disassemby
a. Remove OE retaining clip and keep for reuse.
b. Remove and discard OE pressure regulator
sleeve.
2. Installation & Assembly
a. Install Sonnax pressure regulator sleeve.
c. Reinstall the OE retaining clip.
3. Final Testing
Vacuum testing at the port(s) indicated holds the
recommended minimum 16 in-Hg.
ZF6HP21, ZF6HP28, ZF6HP34
Pressure Regulator
Sleeve
Part No.
95740-29K
NOTE: Kit is not compatible with
ZF6HP19/26/32 (Gen. 1) units.
To differentiate between Gen. 1
and Gen. 2 valve bodies, refer to
ZF Identication Guide at www.sonnax.com.
ZF6HP21 Lower Valve Body
16"-HG
20
25
15
0
10
5
30
VACUUM
TEST
©2015 Sonnax Industries, Inc. 95740-29K-IN 06-11-15
800-843-2600 • 802-463-9722 • F: 802-463-4059 • www.sonnax.com
TRANSMISSION PARTS
Instructions
ZF6HP21
Lower
Valve Body
Sleeve
.511"
dia.
.725"
.629" dia.
.804"
NOTE: OE valve & sleeve
MUST match these
measurements to use.
