Sonos RM010 802.11 b/g/n 3x3 CLIENT DEVICE User Manual PLAY5Guide EN

Sonos, Inc. 802.11 b/g/n 3x3 CLIENT DEVICE PLAY5Guide EN

UserManual.wiki >

RM010 User Manual >

Contents

Product Guide

Sonos® PLAY:5 (gen 2)The all-new Play:5® is the ultimate smart speaker for today’s streaming universe—powerfully smart, fine-tuning its sound to bring you all the energy and emotion the artist packed into the original recording.• Hardware and software custom-designed by Sonos to produce pure, immersive sound that’s crystal clear at any volume. • Powered by 3 tweeters and 3 mid-woofers, each with a dedicated amplifier, perfectly tuned to match the speakers and acoustic architecture. • Works seamlessly with the complete range of Sonos productsNew to Sonos?It takes just a few steps to get your Sonos system up and running—simply follow the setup instructions packaged with your PLAY:5. Once you’ve got it set up, you can add additional Sonos products any time.Adding to an existing Sonos system?The Sonos system can be easily expanded room by room. If you are adding this PLAY:5 to an existing Sonos system, you can turn directly to "Adding to an Existing Sonos System" on page 6.

Product Guide2Your Home NetworkTo access Internet music services, Internet radio, and any digital music stored on your computer or Network-Attached Storage (NAS) device, your home network must meet the following requirements:Home network requirements• High-speed DSL/Cable modem, or fiber-to-the-home broadband connection for proper playback of Internet-based music services. (If your Internet service provider only offers Satellite Internet access, you may experience playback issues due to fluctuating download speeds.)• If your modem is not a modem/router combination and you want to take advantage of Sonos' automatic online updates, or stream music from an Internet-based music service, you must install a router in your home network. If you do not have a router, purchase and install one before proceeding. If you are going to use the Sonos Controller App on an Android™ or iOS device, or you are setting up Sonos wirelessly, you will need a wireless router. Please visit our website at http://faq.sonos.com/apps for more information.Connect a Sonos BOOST (or player) to your router if: • You have a larger home where the WiFi performance isn’t reliable and you want to strengthen the wireless performance of your Sonos system.• Your WiFi network is already in high demand with streaming video and web surfing and you want to create a separate wireless network exclusively for your Sonos speakers.• Your home network is 5GHz only (not switchable to 2.4GHz).For best results, you should connect the computer or NAS drive that contains your personal music library collection to your home network router using an Ethernet cable. Computer software requirements• Windows® XP SP3 and higher (while Windows XP SP3 and higher are compatible with Sonos version 5.1 and higher, standard wireless setup is only supported on Windows 7 and higher)• Macintosh® OS X 10.7 and higheriOS software requirements• Compatible with iPhone, iPad and iPod touch running iOS 6.0 and higher. Certain features may require later versions of iOS.Note: Your network must have a high-speed Internet connection, as the Sonos system is designed to provide you with free, online software updates. Your Sonos system must be registered to receive these updates so be sure to register during the setup process. We do not share your e-mail address with other companies.Note: Sonos communicates over a 2.4GHz home network supporting 802.11 b/g/n wireless technology. 5GHz networks are not supported in a completely wireless Sonos setup.

Product Guide4Sonos PLAY:5 FrontNote: The Sonos PLAY:5’s front grille is not removable. Tampering with the grille may result in damage to your PLAY:5. On/Off Your Sonos system is designed to be always on; the system uses minimal electricity whenever it is not playing music. • To quickly stop streaming audio in all rooms, select Pause All from the Rooms menu on a Sonos controller. • To stop streaming audio in one room, you can touch the Play/Pause button on the PLAY:5.Status indicator Indicates the current status of a Sonos product. When the PLAY:5 is in normal operation, the white indicator is dimly lit. When touch controls are activated, the white light is brightly illuminated. For a complete list of status indications, please go to http://faq.sonos.com/led. Play/Pause Toggles between playing and pausing the audio (defaults to restarting the same music source when pressed unless a different source is selected). Touch to start or stop streaming audio.Touch Controls

Product Guide6Selecting a LocationThe PLAY:5 is designed to produce great sound wherever it's placed. For maximum performance, we have a few guidelines:• For a single PLAY:5 speaker Sonos recommends positioning the speaker horizontally, enabling stereo sound over a wide sound stage. A single PLAY:5 speaker positioned in vertical mode is a mono speaker (there is no stereo separation).• For stereo pair placement information, see "Optimum stereo pair placement information" on page 7.• Place the PLAY:5 across the room from where you will be listening (at or close to your ear height for best results).Adding to an Existing Sonos SystemOnce you’ve got your Sonos system set up, you can easily add more Sonos products any time (up to 32). 1. Select a location for your PLAY:5 (see page 6 for optimal placement guidelines.)2. Attach the power cord to the PLAY:5 and apply power. Be sure to push the power cord firmly into the unit.3. Choose one of the following options:• Using a handheld Sonos controller: Select Add a Player or SUB from the Settings menu and follow the on-screen prompts to add this product to your Sonos system. • Using the Sonos Controller for Mac or PC: Select Add a Player or SUB from the Manage menu and follow the prompts to add this product to your Sonos system.Thick walls, 2.4 GHz cordless telephones, or the presence of other wireless devices can interfere with or block the wireless network signals from your Sonos system. If you experience difficulty after positioning a Sonos product, try one or more of the following resolutions—relocate the Sonos product; change the wireless channel your music system is operating on; connect a Sonos product to your router if your setup is currently wireless. Tuning the Sound For Your Room (Trueplay™)While you can locate Sonos speakers just about anywhere, the size and shape of your room and the objects in it can distort your speaker’s sound. To ensure a speaker sounds right no matter where you place it, Sonos speakers include Trueplay. If you have an iPhone, iPad or iPod Touch running iOS7 or later, you can use Trueplay tuning to make every Sonos speaker sound right for the room and true to the music.Sonos uses your iOS device’s microphone to measure acoustic distortion in the room and then Trueplay adapts your Sonos speaker's sound for its position in the room.1. Select Settings -> Room Settings.2. Select the room your speaker is located in.3. Select Trueplay Tuning and follow the on-screen prompts.Caution: The PLAY:5 is not water-resistant. Don’t leave it outside during a rain storm or position it near water.Note: If you want to make a wired connection, connect a standard Ethernet cable from your router (or a live network wall plate if you have built-in wiring) to the Ethernet port on the back of the Sonos product.

Sonos PLAY:5 7Creating a Stereo PairThe Stereo Pair setting allows you to group two PLAY:1s, PLAY:3s or PLAY:5s in the same room to create a wider stereo experience. In this configuration, one unit serves as the left channel and the other serves as the right channel. You cannot create a mixed stereo pair—the Sonos products in the stereo pair must be the same.Optimum stereo pair placement information• When creating a stereo pair, it is best to place the two Sonos speakers 8 to 10 feet away from each other.• Your favorite listening position should be 8 to 12 feet from the paired Sonos products. Less distance will increase bass, more distance will improve stereo imaging.• You can place them either horizontally or vertically—vertical works best when you sit in an optimized seat in the center between the speakers; horizontal works well when you want a great experience over a wider listening area (such as a couch).Note: The Stereo Pair setting is for use with PLAY:1, PLAY:3 and PLAY:5 units only. You cannot create a mixed stereo pair—both Sonos products in the stereo pair must be the same. PLAY:5 (gen 2) speakers: When placing two speakers vertically, be sure they are positioned so that either both Sonos logos face away from each other or both Sonos logos face toward each other as shown here.

Product Guide8Using a handheld Sonos controller1. Select Settings -> Room Settings.2. Select a PLAY:5 to pair.3. Select Create Stereo Pair, and touch Next.4. Select the other PLAY:5 you wish to pair.5. Press the Volume Up button on the PLAY:5 you wish to use as the left channel.The units automatically connect to form a stereo pair.To separate a stereo pair:1. Select Settings -> Room Settings.2. Select the stereo pair you wish to separate (the stereo pair appears with L + R in the room name.)3. Select Separate Stereo Pair, and touch Separate to confirm.Using the Sonos Controller for Mac or PC1. Choose one of the following:• Using the Sonos Controller for PC: Select Settings from the Manage menu.• Using the Sonos Controller for Mac: Select Preferences -> Room Settings from the Sonos menu. 2. Select a PLAY:5 you want to pair from the Room Settings for drop-down list. 3. Click Create Stereo Pair and follow the prompts to set up the stereo pair.To separate a stereo pair:1. Choose one of the following:• Using the Sonos Controller for PC: Select Settings from the Manage menu.• Using the Sonos Controller for Mac: Select Preferences -> Room Settings from the Sonos menu. 2. Select the Sonos stereo pair you wish to separate from the Room Settings for drop-down (the stereo pair will appear with L + R in the room name). 3. On the Basic tab, click Separate Stereo Pair.4. Click Separate.Playing MusicYou can use any Sonos controller to select music—simply touch to select from the Sonos music menu on a handheld controller, or click to select from the MUSIC pane within the Sonos Controller for Mac or PC.RadioSonos includes a radio guide that provides immediate access to over 100,000 free pre-loaded local and international radio stations, shows and podcasts streaming from every continent.To select a radio station, simply select Radio by TuneIn and choose a station.

Sonos PLAY:5 9Music servicesA music service is an online music store or online service that sells audio on a per-song, per audiobook, or subscription basis. Sonos is compatible with several music services - you can visit our website at www.sonos.com/music for the latest list. (Some music services may not be available in your country. Please check the individual music service’s website for more information.) If you are currently subscribed to a music service that’s compatible with Sonos, simply add your music service user name and password information to Sonos as needed and you’ll have instant access to the music service from your Sonos system. 1. To add a music service, touch Add Music Services from the Sonos music menu on your handheld controller.2. Select the music service you would like to add. 3. Select Add Account, and then follow the on-screen prompts. Your login and password will be verified with the music service. As soon as your credentials have been verified, the music service displays on the Sonos music menu.Free music service trials are available in some countries. (Please check the individual music service’s website for more information.) If there is a music service trial visible on the Music Services menu, simply touch it to select. Touch Add Account -> I’m new to [music service], and then follow the prompts to activate the music trial. After the trial period is up, you will need to subscribe to the music service to keep the music playing.Local music libraryThe Sonos system can play music from any computer or network-attached storage (NAS) device on your home network where you have shared music folders. During the setup process, you are guided through the process of accessing your local music library (such as your iTunes library). Over time, you may wish to add or remove folders from this list.To make changes to your local music library, select the Settings menu from a handheld Sonos controller and then choose one of the following options:• To add a new music folder, select Manage Music Library-> Music Library Setup -> Add New Share.• To remove a music folders, select Manage Music Library -> Music Library Setup. Touch the share you wish to remove and then select Remove. The Sonos system indexes your local music so you can view your music collection by categories (such as artists, albums, composers, genres, or tracks.) If you add new music, simply update your music index to add this music to your Sonos music library.• To update your music library, select Manage Music Library -> Update Music Index Now. If you’d like your music library to update automatically each day, select Schedule Music Index Updates and then select an update time.Wireless iTunes playbackYou can select and play music and podcasts stored on any iPad, iPhone, or iPod touch that’s on the same network as your Sonos products. Playback is perfectly synchronized, in any or every room of your home. Simply choose This iPad, This iPhone, or This iPod touch from the Sonos app on your iOS device to make audio selections and then you can use any Sonos controller to control playback.

Product Guide10Wireless playback from Android devicesYou can select and play music stored on any Android device that’s on the same network as your Sonos products. Playback is perfectly synchronized, in any or every room of your home. Simply choose This Mobile Device from the Sonos app on your Android smartphone or tablet to make audio selections and then you can use any Sonos controller to control playback.Google Play Music (Android devices)You can play music to your Sonos system directly from the Google Play Music app on any Android device. This feature is available for both Standard and All Access Google Play Music customers. To play music directly from the Google Play Music app to your Sonos system, you must have both the Google Play Music app and the Sonos Controller App installed on your mobile device. Simply open the Google Play Music app and connect to a Sonos room or room group to start the music. Using Line-InYou can connect an external source, such as a portable music player, to your PLAY:5. The device will be automatically detected as soon as you plug it in.• To connect a portable music player, use the supplied 1/8" (3.5mm) stereo audio cable to plug a music player into the Audio In connection on the back of your PLAY:5. • To connect another external source, such as a CD player, you can use a 1/8" (3.5mm) mini-stereo to RCA audio cable. Plug the mini-stereo end into the PLAY:5, and plug the RCA end into the audio outputs on the external device.Using a handheld Sonos controller:• To play music from this line-in source, select Line-In from the Sonos music menu, select the device, and select Play Now.• To change the name of this device, select Room Settings from the Settings menu. Select the Sonos speaker the source is connected to, and then touch Line-In Source Name. Select a new name from the list, or type a unique name.• To change the line-in level, select Room Settings from the Settings menu. Select the Sonos product this source is connected to, and then touch Line-In Source Level. Select a new level.Using the Sonos Controller for Mac or PC: • To play music from this source select Line-In from the MUSIC pane, click next to the music source, and select Play Now.• To change the settings for this device: • Select Manage -> Settings (PC) or Sonos -> Preferences -> Room Settings (Mac). • Select the Sonos product from the Room Settings for drop-down list.• Click the Line-In tab and update the settings. A default (typical) line-in level is automatically assigned when you select a source name, but if the volume sounds too low, you can select a higher line level for this device. (You may experience sound distortion at higher volume levels if you set the level too high.)

Sonos PLAY:5 11For additional information on connecting audio devices, you can go to our website at http://faq.sonos.com/cables. Basic TroubleshootingIf a problem occurs, you can try the troubleshooting suggestions listed below. If one of these doesn’t remedy the problem, or you are not sure how to proceed, please contact the Sonos Customer Support team and we’ll be happy to help.Sonos product(s) not detected during setup• Check to make sure the power cord is properly seated.• A network issue may be preventing the product from connecting to your Sonos system. If this is a wireless Sonos component, try moving the Sonos products closer together, or use an Ethernet cable to hard wire the product to your router temporarily to see if the problem is related to wireless interference. If you encounter this error while a Sonos product is connected to your router, you can try the steps below to resolve this issue. If you are still experiencing problems, please contact Sonos Customer Support.1. Check the firewallIf you are using a computer, firewall software may be blocking the ports that Sonos uses to operate. First, disable all your firewalls and try to connect again. If this resolves the problem, you should configure your firewall to work with the Sonos Controller for Mac or PC. Please go to our website at http://faq.sonos.com/firewall for additional information. If this does not resolve the problem, you can try step 2 below.Warning: Do not open Sonos products as there is a risk of electric shock. Under no circumstances should Sonos products be repaired by anyone other than an authorized Sonos repair center, as this will invalidate the warranty. Please contact Sonos Customer Support for more information.

Product Guide122. Check the routerYou can bypass your router to determine whether there are any router configuration issues by connecting a Sonos product as shown below—in this BOOST configuration example, note that the BOOST and the computer still have Internet access:• Be sure that your cable/DSL modem is connected to the router’s WAN (Internet) port. • If you have any Sonos products connected to your router, temporarily remove them.• Connect an Ethernet cable from the computer directly to the back of a Sonos product (a BOOST in the illustration above), and then connect another Ethernet cable from that Sonos product directly to one of the LAN ports on your router. • When you make a change to your network configuration, you may need to power cycle the wired Sonos product by unplugging the power cord, and then plugging it back in.Sonos player is not operating properly• If the status indicator is not lit and no sound is produced when the unit is plugged in, check to ensure the power cord is properly seated.• If the unit is powered on, make sure the volume is set to a suitable level; make sure MUTE is not on; if this is a CONNECT:AMP™, make sure the external speakers are connected securely.• If the player has suddenly stopped playing music and the status indicator is flashing orange and white, pause or unplug the player for a few minutes to allow it to cool. See "Player Status Indicators" on page 14.• Move your Sonos controller closer to a player.• Check to ensure there are no obstacles to impede wireless operation.• Check your network connections.• The Sonos player may need to be reset. Disconnect the power cord for 5 seconds, and then reconnect. Wait for the Sonos player to restart.

Sonos PLAY:5 13Not all rooms are visible, or Sonos app doesn’t work in some rooms, or music stops when I use my 2.4 GHz phoneYou are probably experiencing wireless interference. You can change the wireless channel your Sonos system is operating on by following the steps below. • Using a handheld Sonos controller: From the Settings menu, touch Advanced Settings -> Wireless Channel. Choose another wireless channel from the list.• Using the Sonos Controller App for PC: Select Settings -> Advanced from the Manage menu. On the General tab, select another wireless channel from the list. • Using the Sonos Controller App for Mac: Select Preferences -> Advanced from the Sonos menu. On the General tab, select another wireless channel from the list.It may take several seconds for the switch to take effect. If you have music playing, a short music dropout may occur during the wireless channel change.I have a new routerIf you purchase a new router or change your ISP (Internet service provider), you will need to restart all your Sonos products after the router is installed. 1. Disconnect the power cord from all of your Sonos products for at least 5 seconds.2. Reconnect them one at a time, starting with the Sonos product that is connected to your router (if one is usually connected). Wait for your Sonos products to restart. The status indicator light will change to solid white on each product when the restart is complete.If your Sonos setup is completely wireless, you will also need to change your wireless network password. Follow the steps below:1. Temporarily connect one of your Sonos players to the new router with an Ethernet cable.2. From the Sonos music menu on your controller, select Settings.3. Select Advanced Settings -> Wireless Setup.Sonos will detect your network. 4. Enter the password for your wireless network.5. Once the password is accepted, unplug the player from your router and move it back to its original location.I want to change my wireless network passwordIf your Sonos system is set up wirelessly and you change your wireless network password, you will also need to change it on your Sonos system.1. Temporarily connect one of your Sonos players to your router with an Ethernet cable.2. Choose one of the following options:Note: If the ISP technician connects a Sonos product to the new router, you only need to restart your wireless Sonos products.

Product Guide14• Using a handheld Sonos controller, select Settings -> Advanced Settings -> Wireless Setup.• Using the Sonos Controller App for PC, select Settings -> Advanced from the Manage menu. On the General tab, select Wireless Setup.• Using the Sonos Controller App for Mac, select Preferences -> Advanced from the Sonos menu. On the General tab, select Wireless Setup.3. Enter the new wireless network password when prompted.4. Once the password is accepted, you can unplug the player from your router and move it back to its original location.Player Status IndicatorsIndicator Lights Player State Sonos Product Additional InformationSolid white Touch control activeor,Powered up and associated with a Sonos system (normal operation)PLAY:5 (gen2) BRIDGE, BOOST, CONNECT™, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBAR®The white light brightens when touch control is activated and remains at full brightness for the duration of contact. When touch controls are not in use, the white light dims.You can choose to turn the white status indicator light on or off by selecting White Status Light from the Room Settings menu. (The SUB and any players set to surround will reflect the same setting as the player they are paired with.)Flashing white Powering up BRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBARFlashing green Powered up, not yet associated with a Sonos systemOr,WAC j(wireless access configuration) join readyBRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBARFor a SUB, this may indicate the SUB is not yet paired with a player.Solid green Volume set to zero or muted CONNECT, CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBARSlowly flashing greenSurround audio is off or SUB audio is offPLAY:1, PLAY:3, SUBApplicable for player configured as a PLAYBAR surround speaker, or for a SUB paired with a PLAYBAR

Sonos PLAY:5 15Solid orange During wireless setup, this occurs while the Sonos open access point is temporarily active. If you are not setting up your Sonos system, this may indicate warning mode.CONNECT, SUB, CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBARIf the orange light is on AND the player’s volume level automatically reduces, this indicates the player is in warning mode.• Press the Pause button to stop the audio• For Sonos products with a vent opening (SUB, CONNECT:AMP), check to make sure it’s not blocked• Check the room temperature to make sure it’s less than 104°F/ 40° C• If the player is in direct sunlight, provide shade• Allow the player to cool for several minutes and then press Play to restart the audio• If the problem does not resolve, please contact Customer SupportRapidly flashing orangePlayback / Next Track failed CONNECT,CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBARIndicates either playback or next track was not possibleFlashing orange During SonosNet setup, this occurs after a button press while the product is searching for a household to join.BRIDGE, BOOST, CONNECT, SUB, CONNECT:AMP, DOCK, PLAY:1, PLAY:3, PLAY:5, PLAYBARSlowly flashing orange and whiteFault mode CONNECT, CONNECT:AMP, PLAY:1, PLAY:3, PLAY:5, PLAYBAR, SUBIf the lights are flashing orange and white AND the volume automatically mutes, this indicates the player is experiencing a fault condition.• Press the Pause button to stop the audio• Check the room temperature to make sure it’s less than 104°F/40° C• If the player is in direct sunlight, provide shade• Allow the product to cool for several minutes and then press Play to restart the audio• If the problem does not resolve, please contact Customer SupportIndicator Lights Player State Sonos Product Additional Information

Product Guide16Important Safety Information1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water. 6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.8. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Only use attachments/accessories specified by the manufacturer.10. Unplug this apparatus during lightning storms or when unused for long periods of time.11. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 12. The Mains plug should be readily available to disconnect the equipment.13. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 14. Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.

Sonos PLAY:5 17SpecificationsFeature DescriptionAudioSpeakers 3 tweeters (2.20mm, 1x23mm) and 3 long-throw mid-woofers (10 cm), each with a dedicated amplifier, designed in-house and perfectly tuned to match the speakers and acoustic architecture.Audio Line-In Auto-detecting 3.5mm audio line-in connectionMicrophones Two built-in microphones to enable future enhancements of the PLAY:5 listening experience (microphone are currently inactive; when made active, users will be informed and these specifications will be updated)Stereo Pair You can turn two PLAY:5s into separate left and right channel speakers to create wider, bigger deeper sound.MusicAudio Formats Supported Support for compressed MP3, iTunes Plus, WMA (including purchased Windows Media downloads), AAC (MPEG4), AAC+, Ogg Vorbis, Audible (format 4), Apple Lossless, Flac (lossless) music files, as well as uncompressed WAV and AIFF files.Native support for 44.1kHz sample rates. Additional support for 48kHz, 32kHz, 24kHz, 22kHz, 16kHz, 11kHz, and 8kHz sample rates.Note: Apple "Fairplay", WMA DRM and WMA Lossless formats not currently supported. Previously purchased Apple “Fairplay” DRM-protected songs may be upgraded. Music Services Supported Sonos works seamlessly with 7Digital, 8Tracks, Amazon Cloud Player, AUPEO!, Dar.fm, Deezer, Hearts of Space, iHeartRadio, JB Hi-Fi NOW, JUKE, Last.fm, MOG, Murfie, Napster®, Pandora®, Qobuz, Rdio®, Rhapsody®, SiriusXM™ Internet Radio, Simfy, Slacker® Radio, Songl, Songza, Spotify®, Stitcher SmartRadio™, TuneIn, Wolfgang’s Vault®, WiMP, and downloads from any service offering DRM-free tracks. (Service availability varies by region.)Operating Systems (for stored files) Windows XP SP3 and higher; Macintosh OS X 10.7 and higher; NAS (network-attached storage) devices supporting CIFS.Internet Radio Supported Streaming MP3 or WMAAlbum Art Supported JPEG, PNG, BMP, GIFPlaylists Supported iTunes, WinAmp, Windows Media Player, and MusicMatch (.m3u, .pls, .wpl)Networking*Wireless Connectivity Works on your home WiFi network with any 802.11n, 3x3 MIMO, dual-band (2.4GHz/5GHz) router, with 6 antennas to support multiple orientations and advanced out-of-band interference rejection filters to further improve wireless performance Also works on SonosNet™, a secure AES encrypted, peer-to-peer wireless mesh network dedicated exclusively for your Sonos system to reduce WiFi interferenceNetwork Bridging One 10/100 Mbps Ethernet port

Product Guide18* Specifications subject to change without notice.Internet connectivity Internet connection required for access to Internet radio stations, online music services and software updates. (DSL, cable modem or LAN-based high-speed Internet connection required.) Internet functionality may require payment of separate fee to a service provider; local and/or long distance telephone charges may apply.GeneralPower Supply 100 - 240 V~, 50/60 Hz, 2.3ATop Panel Buttons Volume +/- and Play/Pause. Swipe horizontally across the touch controls to skip to next track or previous track.Top Panel Light PLAY:5 status indicatorDimensions (H x W x D) 14.33 x 8.03 x 6.06 in. / 364 (w) x 204 (h) x 154 mm (d)Weight 14 lb / 6.36 kgThreaded Mount NoneOperating Temperature 32º to 104º F (0º to 40º C)Storage Temperature 4º to 158º F (-20º to 70º C)Product Finish White or Black matte exposure with graphite grilleFeature Description

Sonos PLAY:5 19Regulation InformationUSAThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • All Sonos devices have in-products antennas. Users cannot reorient or relocate the receiving antenna without modifying the product • Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Caution: Modifications not expressly approved by the manufacturer may void the user's authority to operate the equipment under FCC rules.The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.CanadaThis Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website www.hc-sc.gc.ca/rpb. As mentioned before, the installer cannot control the antenna orientation. However, they could place the complete product in a way that causes the problem mentioned above.The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.Be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.CanadaCet appareil numérique de classe B est conforme aux normes NMB-003 et CNR-210 en vigueur au Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas créer d'interférences nuisibles. (2) Cet appareil doit tolérer toutes les interférences reçues, y compris les interférences pouvant entraîner un fonctionnement indésirable. L'installateur du présent matériel radio doit veiller à ce que le produit soit placé ou orienté de manière à n'émettre aucun champ radioélectrique supérieur aux limites fixées pour le grand public par le ministère fédéral Santé Canada ; consultez le Code de sécurité 6 sur le site Web de Santé Canada à l'adresse : www.hc-sc.gc.ca/rpb. Comme indiqué auparavant, l'installateur ne peut pas contrôler l'orientation de l'antenne. Il peut néanmoins placer le produit tout entier de manière à provoquer le problème décrit ci-dessus.

Product Guide20Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.Les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.EuropeSonos declares that this product herewith complies with the requirements of the EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, Eco-Design Directive 2005/32/EC, RoHS Directive 2011/65/EU and the R&TTE Directive 1999/5/EC when installed and used in accordance with the manufacturer's instructions. A copy of the full Declaration of Conformance may be obtained at www.sonos.com/support/policies.Attention In France, operation is limited to indoor use within the band 5150-5350 MHz. SonosNet is the propriety wireless mesh network architecture designed to provide robust transmission of high fidelity streaming digital music. All Sonos players within the SonosNet mesh network act as both a client and access point simultaneously. Each Sonos player expands the range of SonosNet mesh network because while each device must be within range of at least one other Sonos player, they do not need to be within range of a central access point. In addition to extending the range between Sonos products, SonosNet can extend the range of other data networking devices within the home, such as Android devices directly connected to SonosNet. Due to the high network availability requirements of the SonosNet mesh network, Sonos players do not have a standby or off mode other than removing the power cord from the AC mains.RF Exposure RequirementsTo comply with FCC and Industry Canada exposure essential requirements, a minimum separation distance of 20cm (8 inches) is required between the equipment and the body of the user or nearby persons.Recycling InformationThis symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead please deliver it to the applicable collection point for the recycling of electrical and electronic equipment. By recycling this product correctly, you will help conserve natural resources and prevent potential negative environmental consequences. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.