Sonova USA DSF5K Sound Reinforcement System User Manual DigiMaster5000 1

Phonak Inc Sound Reinforcement System DigiMaster5000 1

User Manual

www.Phonak.comwww.DynamicSoundField.com029-0710-02/V1.00/2009-12/A+W Printed in Switzerland© Phonak AG All rights reserved!
User Guide
21. Welcome 52. Installation 73. General recommendations 84. Equipment and accessories 95. Important Dynamic SoundField figures 115.1 inspiro operating and charging time 115.2 Operating range 115.3 Transmission technology 126. Controls 136.1 On the inspiro transmitter 136.2 On the DigiMaster 5000 loudspeaker 146.3 The Status Indicator of the DigiMaster 5000 157. Getting started 187.1 Charging inspiro 197.2 Low battery alarms 217.3 Wearing inspiro 22Contents
37.4 Wearing EasyBoom 267.5 Switching ON inspiro 287.6 Activating the key pad lock 297.7 Switching ON DigiMaster 5000 307.8 Muting the microphone 338. Adjusting the volume of Dynamic SoundField 349. Connecting a Smartboard 3510. DynaMic and accessories 3610.1 Controls 3810.2 Charging DynaMic 3910.3 Vibration alarm indication 4210.4 Switching ON DynaMic 4310.5 Using DynaMic 46 11. The MultiTalker Network in school 4911.1 Initiating a MultiTalker Network 5011.2 How to use a MultiTalker Network 52
4Content12. Troubleshooting inspiro 5613. Troubleshooting DynaMic 5814. Dynamic SoundField pairing instructions 6015. Important notices 6216. Service and warranty 6417. Declaration of conformity 6518. Information and explanation of symbols 6719. Personal notes 70
51. WelcomeFor the best possible learning experience children must be able to hear the teacher’s voice clearly in class, but unfortunately this is not always possible. Factors such as classroom noise, the distance between teacher and students, and challenging classroom acoustics can make understanding the teacher difficult, even for children with normal hearing. For teachers meanwhile, noisy classrooms mean raising the voice to be heard, which in turn often leads to vocal hoarseness, pain and in the case of temporary voice loss, time off work.Dynamic SoundField significantly improves the listening and learning performance of schoolchildren, while also saving the voices of the teachers. Dynamic SoundField is brought to you by Phonak.Phonak is the world leader in hearing and communication technology, innovation and reliability based in Switzerland. With proper care and usage, Dynamic SoundField will support your communication needs for many years.Phonak - life is on www.phonak.com
6Further resourcesTo find out more about Dynamic SoundField in general, we recommend visiting the following websites: www.eschooldesk.com This is a special website dedicated to providing support to Dynamic SoundField users. It includes short movies and further troubleshooting advice. www.phonak.com This is the Phonak home page. Go to the product section and click on Dynamic SoundField.The following symbol appears in this user guide: Important notes for all users 1. Welcome
7The installation procedure of the Dynamic SoundField is described in a separate installation instruction which is available online. Please check the green download section onwww.DynamicSoundField.com2. Installation
81. Activate the inspiro transmitter‘s KeyPad lock2. Speak in a natural voice into the EasyBoom microphone3. Do not increase your voice level if the surrounding noise increases. The transmitter‘s Dynamic features will increase your voice automatically4. Activate the inspiro‘s Mic mute for private conversation5. Charge the inspiro transmitter every night6. Switch OFF the DigiMaster 5000 loudspeaker when not in use3. General recommendations
9/ inspiro0 EasyBoom microphone 1 inspiro wearing options: Belt clip and lavalier cord2 Audio cable (1 m /3 feet)3 Charging unit4 Home and travel case4. Equipment and accessories
105 DigiMaster 5000 loudspeaker 6 Wall fi xation 7 Power supply 8 Optional: Stand 9 Optional: Audio cable (3 m/10 feet) 4. Equipment and accessories
115.1 inspiro operating and charging time Operating time of the inspiro transmitter when the battery is fully charged:  approx. 9 hours (if the inspiro is emitting to the loudspeaker and to FM receivers in parallel, the operating time is reduced to about 7–8 hours) Charging time for an 80% charge:  approx. 1 hour Charging time for a 100% charge:  approx. 2 hours5.2 Operating range Dynamic SoundField has been designed for use in classrooms with a maximum size of 8 x 10 meters / 24 x 30 feet.5. Important Dynamic SoundField figures
125. Important Dynamic SoundField figures5.3 Transmission technology Digital on 2.4 GHz The digital signal sent from the transmitter to the loudspeaker cannot be overheard by other equipment.  The number of active Dynamic SoundField systems in a school building is unlimited. Dynamic SoundField systems cannot disturb each other.  Automatic frequency hopping eliminates interference issues, allowing Dynamic SoundField to coexist alongside a school‘s WiFi and Bluetooth networks.
136. Controls6.1 On the inspiro transmitterinspiro/ ON / OFF slider0 Color LCD 1 Soft Keys2 Keypad lock key3 Microphone mute key4 3.5 mm audio input5 mini-USB for chargingRebecca WoodsMonitor01.10.2008 01:57pmSyncH33Vol Down06.07.10 01:57pmVol Up/012435
146 Button to attach the belt clip and the lavalier7 Cable wrapper6.2 On the DigiMaster 5000 loudspeakerLoudspeaker base/ ON / OFF switch0 Power socket1 3.5 mm audio input67 6. Controls19VAUDIO3.2A/0 1
15Loudspeaker top2 mini-USB 6.3 The Status indicator of the DigiMaster 5000The status indicator on the DigiMaster 5000 loudspeaker provides immediate feedback to the teacher. 2Status indicator
16฀Constant blue light:  Standard operating modeThe inspiro transmitter and the DigiMaster 5000 loudspeaker are ON, paired and working in normal operating mode. ฀Blue blinking light:  Power-saving stand-by modeIf the inspiro transmitter has been switched OFF, DigiMaster 5000 recognizes this immediately and switches itself automatically to power-saving stand-by mode. It switches automatically back to standard operating mode as soon as the inspiro transmitter is switched ON. Stand-by mode will also be activated if the transmitter is out of range. ฀Constant green light:  Mic muted on inspiroCheck your inspiro and activate the microphone by pressing the Mic button.6. Controls
17 Yellow blinking light: inspiro not pairedThe yellow blinking light appears if no inspiro has been paired. Check chapter 14. ฀Green blinking light:  Firmware upgrade in processAppears when a firmware upgrade is in process via the mini USB connection at the top of the DigiMaster 5000 loudspeaker. ฀Constant red light:  DigiMaster 5000 needs a re-startSwitch the loudspeaker OFF and, after a few seconds, ON again. If the red light still appears, contact your local sales person.
187. Getting StartedIf Dynamic SoundField has been installed according to the separate installation instructions, the DigiMaster 5000 loudspeaker has been either mounted on the wall or on the stand, and the loudspeaker is connected to the mains. In addition, your inspiro has already been paired with the DigiMaster 5000 loudspeaker. The pairing information is stored in the inspiro and in the DigiMaster 5000 unit. The pairing information remains even if the loudspeaker is removed from the mains or the inspiro is switched off, or the battery from the inspiro is removed. The pairing needs to be re-done after a firmware upgrade of the DigiMaster 5000, the inspiro or both. Please check chapter 14 in this document or in the separate installation instructions for pairing advice.
197.1 Charging inspiroinspiro contains a built-in re-chargeable state-of-the art lithium polymer battery with fast-charge capability. A fully-discharged battery will charge to 80% in one hour and 100% in 2 hours.Select an easily accessible socket outlet and plug the charging unit into the socket outlet.Connect the mini-USB plug from the charging unit to the inspiro.
20 Use only the original Phonak charging unit for the inspiro.The elements within the battery symbol flash duringcharging. The battery cannot be over-charged.If the charging unit isremoved from the inspiro,the segments in thebattery symbol show theactual capacity.If the battery is fullycharged, the batterysymbol in the LCDshows four segments.Fig. 1a01:57pmVol Down06.07.10Vol Up7. Getting Started
21 7.2 Low battery alarms inspiro provides an automatic vibration alarm to signify if the battery is low. Approximately 1 hour before battery is empty: The vibrating alarm is activated. Check the message on the LCD and follow the instructions. Approximately 15 minutes before battery is empty: If inspiro has not been charged after the first alarm, the second vibrating alarm is automatically activated before the battery is completely exhausted. Check the message on the LCD and follow the instructions. If the battery is not charged at that time, inspiro automatically switches OFF 15 minutes later.If the battery is completely exhausted, there will be no segments in the battery symbol and the battery symbol in the LCD will change from white to red.
227.3 Wearing inspiroinspiro can eitherbe worn on the beltby using the clip……or around the neckby using the neck-loop. 7. Getting Started
23 Attaching the clip to the inspiroAttach the clip to the button on the back of the inspiro. Make sure the clip is secure.Fix the clip to the beltor trousers. Make surethe clip is secure./0“click”
24The clip can also be fixed to the belt or trousersbefore the inspiro is attached. Make sure the clip is secure.To remove the clipfrom the inspiro,press the button onthe clip and carefullyremove the clip.//007. Getting Started
25Attaching the neck-loop to the inspiroAttach the neck-loop to the button. / 0 1
267.4 Wearing EasyBoomEasyBoom is the microphone for Dynamic SoundField. If inspiro is in “SoundField” or “SoundField+FM” application mode, an error message will appear if other microphones are used.EasyBoom is a comfortable, easy-to-use and robust boom microphone, ideal for use in classrooms. 7. Getting Started(A) (B)
27 Make sure the head of the microphone is well positioned, as depicted above (A). If required you can easily bend the boom part (B).Fix the clip on your clothes as depicted and make sure the cable is not stretched between the clip and the ear, or the clip and the inspiro transmitter.
287.5 Switching ON inspiroTo switch ON, push the slider to the left until thegreen mark appears and the LCD is illuminated.To save power, the backlight of the inspiro LCD isswitched OFF after a certain time. Press any buttonto activate the LCD backlight.To switch OFF inspiro, push the slider to the right. The inspiro can still be switched OFF if the keypad is locked!ON OFF01:57pmVol Down06.07.10Vol Up7. Getting Started
297.6 Activating the key pad lockIt is recommended toactivate the key pad lockwhenever possible.To activate the key pad lock, go to the highest menu level (shown right), press the key showing the key symbol, then press OK. A key symbol appears in the status bar. If the key pad lock is activated, the front keys are locked. Please note that the ON / OFF slider is never locked and can always be used!To unlock the keys, repeat the above procedure.01:57pmVol Down06.07.10Vol Up01:57pm06.07.10
30 7. Getting Started7.7 Switching ON DigiMaster 5000After having switched inspiro ON, check whether the power adapter of the DigiMaster 5000 is properly plugged into the mains and the loudspeaker. Then switch ON the DigiMaster 5000. The DigiMaster 5000 shows the constant blue light in the status indicator. Start talking!
31 If the inspiro has not been paired with the DigiMaster 5000, the status indicator will show a blinking yellow light. See the pairing procedure on page 60.Status indicator
32TalkingBefore you start talking to the children, make sure ofthe following: the EasyBoom microphone is properly positioned (see page 26) the inspiro is turned ON (see page 28) and the EasyBoom microphone is active, not muted (see page 33)We also recommend activating the Keypad lock (see page 29). Do not touch the EasyBoom microphone if the inspiro is turned ON. If you need to reposition the microphone, simply press the microphone mute key to avoid any amplified noise.01:57pmVol Down06.07.10Vol Up7. Getting Started
337.8 Muting the microphoneThe inspiro’s microphone can be muted simply bypressing the microphone key on the device. If you haveforgotten to activate the microphone, inspiro will warn you with a vibrating alarm after 15 minutes. This symbol in the LCD shows that the microphone is active: This symbol in the LCD shows that the microphone has been muted:01:57pmVol Down06.07.10Vol Up
34Dynamic SoundField‘s volume adapts itself automatically to the surrounding noise level. Therefore, it is not required to adjust the volume manually. Nevertheless, if you want to adjust it for any reason, use the soft keys on the inspiro to wirelessly adjust the volume of the loudspeaker. Depending of the setting of your inspiro, you can either: jump into the volume control feature by pressing the left soft key or  directly press the left soft key to decrease the volume or press the right soft key to increase the volumeThere is a fixed maximum volume limit, which ensures that there is no risk of damaging the ears of the listeners.8. Adjusting the volume of Dynamic SoundField01:57pmVol Down06.07.10Vol Upright soft keyleft soft key
35Connect the audio cable to the Smartboard output and to the audio input to the DigiMaster 5000 loudspeaker. (Consult the user documentation from the Smartboard for this). Phonak offers a 1 m /3 foot audio cable and a 3 m/10 foot audio cable. If you need a longer cable please visit your local store. This way your voice is delivered in parallel with that of the audio signal coming from the Smartboard.9. Connecting a Smartboard19VAUDIO3.2AAUDIO
36DynaMic is supplied with the following accessories: Desk stand  Clamp 3/8”, 5/8” Colored rings (for easy microphone identification)These accessories can be ordered separately: / DynaMic microphone 0 Desk stand with clamp1 Colored rings (red, yellow, green) 2 Charging unit 3 Replacement microphone head10. DynaMic and accessories
37General: Operates only with inspiro on the MultiTalker NetworkLength: 21 cm (8 inches)Antenna length: 15 cm (6 inches)Weight: 110 gOperating time and charging: Operating time if the battery is fully charged: ฀up to 10 hours Charging time for 80% charge: ฀approx. 1 hour Charging time for 100% charge: ฀approx. 2 hours Operating range: Indoor operating range (proximity to inspiro): 25 feet (8 meters) High-powered electronic equipment, large electronic installations and metallic structures may impair and significantly reduce the operating range.
3810.1 Control/ Slider OFF/MUTE /ON The slider puts DynaMic in one of its three modes.0 RESET button This allows DynaMic to be reset. The parameters stored are not affected by this operation. Use a pen to press the button.1 Built-in vibration alarm The vibration alarm provides information on the status of the battery and operation.10. DynaMic and accessories024/31
392 FM Antenna Emits FM to FM receivers3 mini-USB interface Interface for charging and programming. 4 The LED indicates the following:฀battery status฀charging error states10.2 Charging DynaMicDynaMic contains the same re-chargeable, state-of-the-art, fast-charging lithium polymer battery as inspiro. The operating time of this battery is up to 10 hours, depending on how much the microphone is used. A fully-discharged battery takes one hour to charge up to 80% of its full capacity and two hours for a 100% charge.
40 Use only the original Phonak charging unit for inspiro /DynaMic.To simultaneously charge your inspiro and DynaMic we recommend using the twin charger.Select an easily accessible power outlet and plug the charging unit into the socket.Connect the mini-USB plug from the charging unit to the DynaMic. 10. DynaMic and accessories
41 During charging the LED flashes two short green pulses every 5 seconds. When charging is complete, the LED displays a constant green light. We recommend fully charging DynaMic. The battery cannot be over-charged. Battery status indication DynaMic activates an automatic vibration alarm when its battery level is low. Approx. 1 hour before the battery is empty, the DynaMic‘s LED displays 3 orange flashes, repeated every 60 seconds, and the vibration alarm is activated. This means its battery needs charging.
42฀Approx. 15 minutes before the battery is empty, DynaMic must be charged immediately. At his time the LED displays 10 orange flashes and the vibration alarm is activated. If the battery is not charged immediately, DynaMic’s LED displays an additional 10 flashes before switching OFF automatically.10.3 Vibration alarm indicationDynaMic provides a vibration alarm if: The battery is low The device is out the range of the initiator inspiro in the MultiTalker Network (further than 8 m) The microphone is muted for more than 15 minutes There is no transmission – for instance, DynaMic is not paired A system error occurs – fast blinking orange LED signals and vibration In case of a system error, simply press the Reset button.10. DynaMic and accessories
4310.4 Switching ON DynaMic DynaMic is a passaround microphone designed for use with inspiro in the MultiTalker Network. It is not a standalone transmitter.To switch ON DynaMic, follow the steps below. inspiro and DynaMic are both OFF Switch ON inspiro: push the slider to the left until the green mark appears and the LCD is activated (see page 28).
44 Set-up the MultiTalker Network. Initiate your MultiTalker Network by pressing “OK”. Start DynaMic by pushing the slider from OFF to ON during the auto pairing time window of 8 seconds.  After the initiation is complete, the name of DynaMic appears. Press OK. DynaMic joins the MultiTalker Network as a secondary transmitter. 10. DynaMic and accessories5V 750mARESET ONMUTEOFFRebecca Woods
45After switching ON, the LED of the microphone turns OFF to save power.On the initiating inspiro‘s list of participants the microphone can be recognized. After pairing DynaMic with inspiro it is recommended to activate the key pad lock of inspiro whenever possible.MUTE: When DynaMic is turned ON it is possible to mute the microphone. Switch the slider from ON to MUTE. If DynaMic is not paired in the MultiTalker Network it does not start to emit.
4610.5 Using DynaMicCommon use situations DynaMic situated on a child’s desk, using the supplied desk stand Holding DynaMic in the hand  Wearing the remote mic with a neck-cord – not supplied by Phonak Using a floor stand – not supplied by PhonakPassaround microphoneDynaMic can be passed from one speaker to the next.Make sure DynaMic: Is recognized in the MultiTalker Network by the initiator inspiro. You can check via the inspiro’s LCD. Is within range of the MultiTalker Network Is turned ON  Is not muted 10. DynaMic and accessories
47Speak into the microphone at relatively close range: 5 cm (2 inches). When speaking do not cover: the head of the microphone the antennaColored ringsWith the red, blue and green rings it is possible to personalize your DynaMic for quick identifi-cation. You may use only 2 rings on one DynaMic. Do not place these rings over the grill openings of the microphone’s cap.
48DynaMic DataLoggingDynaMic automatically logs its usage times. This information is saved every 15 minutes. The first log entry is stored after using DynaMic for 15 minutes. The usage data log contains information such as the device’s name, timestamp, MTN mode etc.DynaMic can store up to 800 data logs, covering approx. 20 days of usage.10. DynaMic and accessories
49The MultiTalker NetworkOne or more inspiro/DynaMic transmitters can participate in a MultiTalker Network (up to seven transmitters in total). A maximum of six DynaMic microphones can be used on the MultiTalker Network (MTN). The MultiTalker Network is available in the inspiro’s Standard Operating Mode. The MTN’s operating range – i. e. the distance between the initiating inspiro and each inspiro/DynaMic joining the network – is 8 m/25 feet. If a user should unintentionally leave the network, the inspiro or DynaMic’s alarm will alert the user.11. The MultiTalker Network in school
508 m8 m8 m 8 m8 mDiagram of the MultiTalker Network The initiating inspiro displays a list of the other transmitters in the MultiTalker Network. 11.1 Initiating a MultiTalker NetworkMultiTalker Network initiation should be performed in the classroom before the lesson begins. The procedure to follow is straightforward and the inspiro menu guides you through the necessary steps. See the chapter “Switching ON DynaMic”.11. The MultiTalker Network in schoolRebecca WoodsMonitor01.10.2008 01:57pmSyncH33Vol Down06.07.10 01:57pmVol Up
51 Make sure you have all the inspiro and DynaMic transmitters you plan to include in the network in front of you on the desk. Ensure all these transmitters are switched OFF. Take the main teacher’s or main speaker’s inspiro and switch it ON. In this inspiro, select MultiTalker Network and then Set up network. This inspiro is known as the “initiator“. Read the information on the LCD display and then press the Start soft key. Next, switch ON all of the other inspiro and DynaMic transmitters. A list of the inspiro and DynaMic transmitters that have joined the network should now be displayed on the initiating inspiro. If all of the transmitters are listed, press the Continue soft key.You have successfully created a MultiTalker Network! All inspiro and DynaMic transmitters are paired by the initiator inspiro.Begin talking as usual.
5211.2 How to use a MultiTalker Network  The inspiro that set-up (initiated) the network has first priority; all other transmitters (inspiro/DynaMic) have second priority. The teacher with first priority can interrupt any teacher or student that has second priority; a second priority teacher or student can only take over during the speech pauses of the first priority teacher. No user action is required; if the first priority inspiro does not detect speech, any second priority teacher or student can “get the microphone” just by starting to talk. Only one voice is transmitted at a time.Leaving a MultiTalker NetworkThe MultiTalker Network cannot exist without the presence of the initiating inspiro in the network. If you decide to end the MultiTalker Network, the entire network will cease and all of the inspiro and DynaMic transmitters will activate their respective alarms.11. The MultiTalker Network in school
53If you are using an inspiro that just joined a network, you can always leave the network by selecting Stop MultiTalker Network. Your inspiro will then be set to single teaching mode, but all of the other inspiro transmitters in the MultiTalker Network will remain in MultiTalker Network mode.If you switch OFF one DynaMic, it will be deleted from your participants list. The MultiTalker Network will continue with all other DynaMic and inspiro transmitters. Should you unintentionally move outside the range of the MultiTalker Network, you will be alerted by an alarm. You can then choose to either return inside the network’s operating range (i. e. within 8 m /25 feet of the initiating inspiro), or leave the network.
54Practical tips The MultiTalker Network setting is stored in the inspiro transmitters. If the inspiro and DynaMic transmitters have been switched OFF in MultiTalker Network mode, e. g. before lunch, when switched back ON again after lunch MultiTalker Network mode can be selected by simply turning on inspiro and pressing Continue. In this case, there is no need to re-initiate the network. All the DynaMic transmitters will join the network after the 8 second pairing window. If you have set up a MultiTalker Network with, for instance, two inspiro transmitters and a third person then needs to join the network with inspiro or DynaMic, you must initiate a new MultiTalker Network. 11. The MultiTalker Network in school
55
56ProblemThe inspiro cannot be switched ON.Poor speech intelligibility.Speaker’s voice is inaudible even though the inspiro is turned ON.inspiro does not respond to commands.12. Troubleshooting inspiro
57Most probable causeThe battery is run down.The microphone is not positioned properly.The microphone mute hasbeen activated or thehearing device has notbeen set to the rightprogram. Software issue.SolutionCharge the inspiro for at least two hours. Move the microphone closer to the speaker’s mouth.Check the inspiro’s LCDdisplay and press themicrophone mute key inorder to activate themicrophone. Reboot inspiro by pressing its 4 side buttons at the same time.
58ProblemThe DynaMic cannot be switched ON.Poor speech intelligibility.Speaker’s voice is inaudible even though DynaMic is turned ON. DynaMic is not responding to commands.13. Troubleshooting DynaMic
59Most probable causeThe battery is empty.The microphone has not been positioned properly.DynaMic’s antenna or cap are partially covered.The colored rings are covering the acoustic openings. DynaMic is muted.SolutionCharge DynaMic for at least two hours.Move DynaMic closer to the speaker’s mouth.Uncover DynaMic’s antenna and cap.Move DynaMic’s colored rings off these openings. Check DynaMic is not muted.Make sure DynaMic is turned ON. Then reset it using the RESET button.
60In case you need to re-pair the inspiro transmitter with the DigiMaster 5000 loudspeaker, proceed as follows:A Take inspiro and make sure it is charged (see the Dynamic SoundField User Guide). Switch ON inspiro. If the battery symbol appears, press the two buttons shown (below-left) simultaneously. Release the two buttons then Press ‘OK’. 14. Dynamic SoundField pairing instructions01:57pmVol Down06.07.10Vol Up01:57pmVol Down06.07.10Vol Up
61B You will now see inspiro‘s installation menu. Select ‘Pairing’. inspiro will guide you now through the pairing process. Please follow the instructions provided: a) Switch ON the DigiMaster 5000. Hold inspiro close to the loudspeaker (nearer than 1 meter/ 3 feet). Start the pairing process. When the LED in the DigiMaster 5000 is blinking, the loudspeaker is ready to receive the pairing signal from the transmitter. b) After a short time, inspiro will inform you that the DigiMaster 5000 has been paired. The LED color of the DigiMaster 5000 will now display a constant blue light. This blue light shows that the Dynamic SoundField system is ready for operation. C Switch OFF both inspiro and the DigiMaster 5000. Dynamic SoundField’s installation is complete.
62DigiMaster 5000, inspiro and DynaMic collect and store internal technical data. This data may be read by a hearing care professional in order to check the device, as well as to support you in being able to use the Dynamic SoundField system in the ideal manner. Do not use your Dynamic SoundField system in a place where it is prohibited to use electronic devices. If in doubt, please ask the person in charge. Persons with pacemakers or other medical devices should ALWAYS consult their physician, the manufacturer of their pacemaker, or other medical device BEFORE using the Dynamic SoundField system. The use of inspiro with a pacemaker or other medical devices should ALWAYS be in accordance with the safety recommendations of the physician responsible for your pacemaker or the pacemaker manufacturer. The digital signal sent from the inspiro transmitter to the DigiMaster 5000 loudspeaker cannot be overheard by other devices. 15. Important notices
63 Do not use water or other liquids to clean your Dynamic SoundField system. Use only original Phonak accessories. Use only the original Phonak charger for inspiro and DynaMic. Your Dynamic SoundField system should only be repaired by an authorized service center. Dropping your Dynamic SoundField system can cause damage. Do not place DynaMic’s personalization rings over the acoustic openings of the microphone’s cap. Do not cover the antenna or the microphone’s cap while speaking. The DynaMic microphone cap should only be opened for replacement purposes.
6416. Service and warrantyPhonak provides a manufacturer’s limited warranty for your Dynamic SoundField. This covers all manu-facturing and material defects. Problems with your Dynamic SoundField arising from improper handling or care and repairs made by an unauthorized party are not covered by the warranty.Please ask at the point of sale for full details of this warranty. The salesperson will note the serial numbers of your Dynamic SoundField below. It will be needed in the event of a warranty repair.inspiro serial number:inspiro purchase date:DigiMaster 5000 serial number:DigiMaster 5000 purchase date: DynaMic serial number:DynaMic purchase date:
65Hereby, Phonak Communications AG, Länggasse 17, CH-3280 Murten, declares that the DigiMaster 500, inspiro and DynaMic are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.To obtain a copy of the Declaration of conformity, please contact the local Phonak AG representative whose address can be taken from the list of Phonak distributors worldwide.These devices comply with part 15 and part 95 of the FCC rules and with RSS 210 of Industry Canada.Operation is subject to the following two conditions:(1) These devices do not cause harmful interference and (2) must accept any interference received, including interference that may cause undesired operation.These transmitters are authorized by rule under the Low Power Radio Service (47 C.F.R. Part 95) and must not cause harmful interference to TV reception or United States Navy SPASUR installations.17. Declaration of conformity
66You do not need an FCC license to operate these transmitters. The transmitters may only be used to provide: auditory assistance to persons with disabilities, persons who require language translation, or persons in educational settings; health care services to the ill; law enforcement tracking services under agreement with a law enforcement agency; or automated maritime telecommunications system (AMTS) network control communications.Two way voice communications and all other types of uses not mentioned above are expressly prohibited.Warning: Changes or modifications made to this equipment not expressly approved by Phonak may void the user’s authority to operate the equipment.17. Declaration of conformityRadiofrequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. DigiMaster 5000 should be installed and operated with minimum distance of 20 cm between the radiator and your body. DigiMaster 5000 must be operated in a system only with certified Phonak transmitters like inspiro and DynaMic. Co-location or operation in conjunction with any other antenna or transmitter may not ensure compliance with FCC RF exposure guidelines.
6718. Information and explanation of symbols The CE symbol is confi rmation that this Phonak product meets the requirements of the R&TTE Directive 1999/5/EC on Radio and Telecom-munication Terminal Equipment. The alert sign means that potential restrictions on its use are applicable in one or more EU Member States. This symbol indicates that it is important that the user refers to associated warnings given in this user guide. !
68The symbol with the crossed out disposal bin indicates that these products shall not be treated as household waste. Please hand over your old or unused product to the applicable collection point for the recycling of electrical and electronic equipment or bring your old product to your hearing care professional for appropriate disposal. By ensuring these products are disposed of correctly, you will help prevent potential negative effects on the environment and human health.Important notes for all users.
69These products have been designed for trouble-free operation without restrictions when used as intended, unless otherwise stated in this user guide.Temperature should not exceed limits of –20°/60° Celsius at a relative air humidity of 65% for extended periods during trans-portation and storage. Air pressure between 500 and 1100hPa is not detrimental to these devices.Operating conditionsTransportation and storage conditions18. Information and explanation of symbols
70Notes

Navigation menu