Sonova USA TVLINK2 Phonak TVLink S basestation User Manual manual

Download:
Mirror Download [FCC.gov]
Document ID	1561170
Application ID	CFaDLeAhEn1A4XCQsXAbTw==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	147.32kB (1841552 bits)
Date Submitted	2011-10-17 00:00:00
Date Available	2011-10-17 00:00:00
Creation Date	2011-09-26 09:42:42
Producing Software	iText 1.3.6 (by lowagie.com) distributed with the Software Developer's Journal
Document Lastmod	2011-09-26 09:42:42
Document Title	manual
Document Creator	pdfsam-console (Ver. 0.4.4)

0678
029-1013-02/V1.00/2010-04/A+W/FO Printed in Switzerland
©Phonak AG All rights reserved
EU Representative:
Phonak GmbH
D-70736 Fellbach-Oeffingen
Germany
TVLink S basestation
3. Daily usage of the Phonak TVLink
Step 4: Listening to your TV
You will hear the sound of your TV directly in your
Headset.
If you cannot hear the sound of your TV through
TVLink please repeat steps 1 to 4 on pages 2 to 9.
The TVLink system supports Bluetooth operation up
to a range of 30 m (100 ft). Line-of-sight between your
Headset and the TVLink basestation is not required.
However, interference in the environment by walls or
furniture may reduce the operating range.
3. Daily usage of the Phonak TVLink
If the headset moves out of range of the TVLink basestation the wireless audio transmission will be terminated.
If the headset is then moved back into range of the
TVLink basestation, it will automatically resume.
It may take up to 10 seconds until the streaming
resumes. The streaming light indicator (g) should
be solid blue during streaming.
If the TVLink basestation status light (g)
– is green, make sure TV sound and Headset are
switched on.
– blinks blue, you are in paused mode. Press the
Headset main button (b) to resume streaming.
10
3. Daily usage of the Phonak TVLink
Step 5: Adjusting the volume of the TV signal
First, set the volume of the TV speakers at the level to
suit other viewers.
If the TVLink basestation is connected to your TV
with the RCA/Cinch cable (i), adjust the volume via
the TVLink basestation volume control (b) and (c).
(c)
11
(b)
3. Daily usage of the Phonak TVLink
If your TVLink basestation is connected to the
headphone socket of your TV, you may also use your
TV remote control to adjust volume via the TV
directly. Please refer to the TV user guide for more
details on setting the TV volume.
If your TV is connected to a satellite receiver or
a set-top box, make sure the volumes of these
additional devices are set to a medium level for
best audio quality results.
12
3. Daily usage of the Phonak TVLink
Step 6: Switching off TVLink basestation
To switch off the devices:
To end the transmission of the TV audio signal,
switch off the TVLink basestation by pressing the
ON/OFF button (a) as shown in fig. 2.
(a)
Fig. 2
13
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes :
(1) cet appareil ne doit pas causer d'interférence et
(2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent affecter son
fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l’appareil de sans fil Dell est inférieure à la limite d'exposition aux
fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil Dell de façon à minimiser les
contacts humains lors du fonctionnement normal.
5. Information and explanation
of symbols
0678
The CE symbol is confirmation by
Phonak AG that this Phonak product
meets the requirements of the R&TTE
Directive 1999/5/EC on Radio and
Telecommunication Terminal Equipment.
The numbers after the CE symbol are
the numbers of consulted certified
bodies under the above mentioned
directives. The alert sign means that
potential restrictions on its use are
applicable in one or more EU Member
States.
This device is a class 2 device and
can be operated in the EU member
states without restrictions for indoor
use, but must not operated outdoors
in France.
16
5. Information and explanation of symbols
This symbol indicates that it is
important for the user to read and
take into account the relevant
information in these user guides.
This symbol indicates that it is important for the user to pay attention to
the relevant warning notices in these
user guides.
Important information for handling
and product safety.
Australian EMC and Radiocommunications compliance label.
Operating
conditions
17
This device is designed such that
it functions without problems or
restrictions if used as intended, unless
otherwise noted in these user guides.
–10°/55° Celsius and relative
humidity of <95% (non condensing)
5. Information and explanation of symbols
Transport
and storage
conditions
During transport or storage, the
temperature should not exceed the
limit values of –20°/60° Celsius
and relative humidity of 90% for a
long period of time. The air pressure
between 500 and 1100 hPa is
appropriate.
The symbol with the crossed-out
garbage bin is to make you aware
that this device may not be thrown
away as normal household waste.
Please dispose old or unused device,
at waste disposal sites intended
for electronic waste, or give your
device to your retailer for disposal.
Proper disposal protects the environment and health.
18

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 19
Creator                         : pdfsam-console (Ver. 0.4.4)
Producer                        : iText 1.3.6 (by lowagie.com) distributed with the Software Developer's Journal
Modify Date                     : 2011:09:26 09:42:42+08:00
Create Date                     : 2011:09:26 09:42:42+08:00

EXIF Metadata provided by EXIF.tools