Sony Engineering FFS-R RF glow-stick receiver User Manual FreFlow

Sony Engineering Corporation RF glow-stick receiver FreFlow

Users manual

Download: Sony Engineering FFS-R RF glow-stick receiver User Manual FreFlow
Mirror Download [FCC.gov]Sony Engineering FFS-R RF glow-stick receiver User Manual FreFlow
Document ID1992185
Application IDF7Lcy+7AZ5R5Trh04nBtGg==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.01kB (37579 bits)
Date Submitted2013-06-17 00:00:00
Date Available2013-12-14 00:00:00
Creation Date2013-05-17 19:15:45
Producing SoftwareAcrobat Distiller 10.1.7 (Windows)
Document Lastmod2013-05-17 20:38:30
Document TitleFreFlow
Document CreatorAdobe InDesign CS5.5 (7.5.2)
Document Author: Sony Engineering Corporation

FreFlow® Instruction Manual
U-000
©2013 Sony Engineering Corporation Printed in Vietnam
Before operating the product, please read this manual thoroughly and retain it for future reference.
Design and specifications are subject to change without notice.
Information
Notes on Use
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
You are cautioned that any changes or modifications not
expressly approved in this manual could void the user’s
authority to operate the equipment.
Note:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
ēReorient or relocate the receiving antenna.
ēIncrease the separation between the equipment and
receiver.
ēConnect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
ēConsult the dealer or an experienced radio/TV
technician for help.
FCC Label is placed in the battery compartment.
ˎDo
not put small parts or batteries in your mouth.
Doing so may lead to choking or serious injury.
ˎKeep out of reach of children as there is a risk of
choking or serious injury due to accidental swallowing.
ˎIf batteries are swallowed, seek medical treatment
immediately.
ˎMaterial leaked from batteries getting in the eyes, on
skin, or on clothing may lead to loss of sight or other
injury. Flush any battery material with large volumes of
water, and consult a physician.
ˎDo not look into the light from the product or shine it
directly at eyes. Doing so may lead to vision disorders.
ˎDo not disassemble or modify the product. Doing so
may lead to fire, injury, etc.
ˎThe product is not waterproof. Do not allow it to get
wet nor use it in water. Doing so may lead to electrical
shock or damage to the product.
ˎDo not apply strong impact or swing the product
around. Doing so may lead to injury or damage to the
product.
ˎDo not use the product if malfunctioning or damaged.
Doing so may lead to shock or injury.
ˎImmediately remove the batteries and discontinue use
if...
ēthe product is dropped or subjected to an impact in
which the interior is exposed.
ēthe product emits a strange smell, heat, or smoke.
ˎWhen dirty, this unit may be cleaned with a clean, dry
cloth.
Do not allow this unit to come in contact with alcohol
or other chemicals.
ˎSignal reception may be impaired in some wireless
operating environments.
ˎIf you feel ill while using the product, turn off the
power and discontinue use.
How to Use
ʓ Pull out insulation sheet.
Insulation sheet
ʔ Slide to power switch to the ON position, to turn on the light. It may take a few seconds to light up.
Power switch
Color change button
ʕ The light color set will change each time the color change button is pressed.
FreFlow_GB_4_20130515
Operation With a FreFlow® Wireless System
ʓ Wait with the power switch set to ON. You do not need to make any special operations. Operation will start
automatically when a wireless signal is received.
ʔ Light color will change by wireless command only in a venue where a FreFlow® wireless system is set up. Light color
may not change when used in a venue other than that where the product was purchased. This does not indicate a
malfunction.
ʕ Light color cannot be changed by the color change button while a wireless signal is being received.
ʖ When a wireless signal is no longer received, you can operate the product as you like.
How to Replace Batteries
ʓ Push the tab in the direction indicated by the arrow, and remove the battery box cover.
Tab
Cover
ʔ Insert the batteries, making sure the + and - terminals are in the correct direction, and close the cover securely.

ˎSet
the batteries with the + and - terminals in the correct direction.
the batteries when they are depleted or when not using for a long period of time.
ˎDo not use or leave in places with intense direct sunlight or in hot locations such as a car in the sun.
ˎUse new batteries when replacing the batteries. Do not mix with old batteries, different types of batteries, etc.
ˎDo not subject batteries to fire or high temperatures.
ˎTape over battery contacts to avoid short-circuit when disposing of batteries, and follow local regulations for battery
disposal.
ˎRemove
Specifications
ˎModel
Number: FFS-R
ˎMaterials
Grip, cover: ABS / Cylinder: PET
Requirement
Two size AAA (LR03) alkaline batteries: 3.0 V DC
ˎBattery life
Approx. 4.5 hr. *1
*1 Time may vary, depending on the temperature or conditions of use.
ˎPower
MADE IN VIETNAM
[For inquires]
TBD
FreFlow® and its logo are trademarks or registered trademarks of Sony Engineering Corporation.
FreFlow_GB_4_20130515

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Sony Engineering Corporation
Create Date                     : 2013:05:17 19:15:45+09:00
Modify Date                     : 2013:05:17 20:38:30+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe InDesign CS5.5 (7.5.2)
Metadata Date                   : 2013:05:17 20:38:30+09:00
Trapped                         : False
Producer                        : Acrobat Distiller 10.1.7 (Windows)
Format                          : application/pdf
Title                           : FreFlow
Creator                         : Sony Engineering Corporation
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Version ID                      : 1
Document ID                     : uuid:b077928c-8e0a-4289-ab59-18f0664804f5
Instance ID                     : uuid:1d5cefd8-24c8-417c-89b7-52eeb00cc40f
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AADJFFS-R

Navigation menu