Sony Group BTMS3 Bluetooth Module User Manual SRS BTX500

Sony Corporation Bluetooth Module SRS BTX500

Contents

BTMS3_Host User Manual

SRS-BTX500 [UC7] 4-457-524-11(1)Personal Audio System©2013 Sony Corporation Printed in China4-457-524-11 (1)SRS-BTX500Function of PartsBATTERY/CHARGE indicator Lights up, flashes or turns off depending on the status of the system.For details, see the following section, “Indications of BATTERY/CHARGE indicator.”N-markTouch to make Bluetooth connection with an NFC compatible smartphone. (call) buttonPress to call or operate during a call.VOLUME −/+ buttonsAdjusts the volume. Illumination lampLights up in a variety of colors depending on the status of the system. For details, see the following section, “Indications of Illumination lamp.”MicrophoneUse during a call.StandOpen to use the system.DC IN 15V jackConnects the supplied AC adaptor.AUDIO IN jackConnects to the headphone jack of a portable audio device,computer, etc., using a connecting cord (not supplied).BLUETOOTH STANDBY switchTurns on and off the Bluetooth standby mode.RESET buttonResets the system.DC OUT ONLY connector (USB)Charges devices, such as your smartphone, etc. by connecting to the DC OUT ONLY connector (USB connector).SOUND buttonPress to select a sound effect.SOUND indicatorLights up, according to the sound effect setting.AUDIO IN buttonPress to listen to sound from a device connected by a connecting cord (not supplied).AUDIO IN indicator (amber)Lights up in AUDIO IN mode.BLUETOOTH-PAIRING buttonPress to pair with a Bluetooth device.Bluetooth indicator (blue)Lights up, flashes or turns off depending on the communication status.For details, see the following section, “Indications of the Bluetooth function.”/ buttonTurns the system on/off.Indications of BATTERY/CHARGE indicator (built-in lithium-ion battery)Status BATTERY/CHARGE indicatorSystem turned on Lights up (green) (battery operation only)Battery requires charging Flashes (green)Charging battery Lights up (amber)Charging complete Off Indications of Illumination lampStatus Illumination lampAUDIO IN mode Lights up (white)Searching for a device Lights up (white)Connecting to Bluetooth deviceLights up (blue)Pressing VOLUME−/+ buttonsFlashes once (white)When the volume hits the maximum or minimumFlashes three times (white)Tip To turn the illumination on/off, hold down the BLUETOOTH-PAIRING button, then press and hold the / button.Indications of the Bluetooth functionStatus Bluetooth indicator (blue)Pairing with a device Flashes quicklySearching for a device FlashesConnected to a device Lights upBluetooth standby mode Flashes slowlyOpening the StandThe system stands itself by opening the stand.To close the standClose the stand to the opposite way of arrow.Turning the System on and off/Charging the systemThis system can operate by AC adaptor or built-in lithium-ion battery (rechargeable). Charge the battery before using the system for the first time.1 Connect the supplied AC adaptor.The BATTERY/CHARGE indicator (amber) lights up when the battery is being charged, and turns off when charging is complete. It takes approximately 4 hours to charge the battery.2 Press the / button.Tip You can operate the system by battery instead of the AC adaptor by charging the system before use.Notes When the BATTERY/CHARGE indicator flashes as below, charge the system. In these cases, you cannot charge devices via the DC OUT ONLY connector.Flashes (green) (Battery power is low).Flashes (amber), then turns off after turning on the system (No battery power remaining). When you switch the power source between AC adaptor and battery by connecting/disconnecting the AC adaptor, the system stops sound output for a short while. This is not a malfunction. The maximum power output will be lower when the AC adaptor is disconnected. In an extremely cold or hot environment, note the following points.When operating by the AC adaptor, charging may complete too quickly, or may not be possible.When operating on battery only, the system may stop after the BATTERY/CHARGE indicator flashes (green) three times. Charge the battery at least twice a year.To reset the systemPress the RESET button on the rear of the system with a pointed object if the buttons on the system do not function.––––Operating InstructionsEnglish Personal Audio SystemBefore operating the system, please read this guide thoroughly and retain it for future reference.Owner’s Record e serial number is located on the bottom.Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. SRS-BTX500Serial No. ________________________________For customers in the USAPlease register this product on line at http://www.sony.com/productregistrationProper registration will enable us to send you periodic updates about new products, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modi cation.  ank you.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.As the main plug of AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.The nameplate and important information concerning safety are located on the bottom exterior of the main unit and on the surface of the AC adaptor.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Dispose of used battery promptly, according to local environmental laws and guidelines in force. Keep away from children.For the State of California, USA onlyPerchlorate Material - special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material : Lithium battery contains perchlorate.On Copyrights and LicensesThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.Android is a trademark of Google Inc.iPhone is a trademark of Apple Inc., registered in theU.S.and other countries.Other trademarks and trade names are those of their respective owners.NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.For the customers in the USA and CanadaRECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/Caution: Do not handle damaged or leaking Lithium-Ion batteries.How to Make Wireless Connection with Bluetooth DevicesYou can enjoy music and hands-free calling with the system wirelessly by using your device’s Bluetooth function.Choose one of the following three connection methods, best suited for the Bluetooth device. For details on how to operate your device, refer to the operating instructions supplied with the device.Pairing with a Bluetooth device: see Pattern ABluetooth devices need to be “paired” with each other beforehand.Connecting with a paired device: see Pattern BTo listen to music with a Bluetooth device that has been paired, see this pattern.One touch connection with a smartphone (NFC):see Pattern CUsing an NFC compatible smartphone, you can establish a Bluetooth connection by just touching the system with it.Check the following before operating the system. Both the system and the device are placed within 1 m of each other. The system is connected to the AC adaptor, or the battery is sufficiently charged. The operating instructions supplied with the device are at hand.Pattern A Pairing and connecting with a Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes.If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.For details, refer to the operating instructions supplied with the device.3 Press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.The Bluetooth indicator (blue) begins to flash quickly and pairing mode is entered. Tip When the system is turned on first time, the Bluetooth indicator (blue) starts flashing quickly.Flashes quickly4 Perform the pairing procedure on the Bluetooth device to detect the system.5 Select “SRS-BTX500” shown in the display of the Bluetooth device.If “SRS- BTX500” does not appear on the device’s display, repeat from step 2.Note Some devices cannot display a list of detected devices.6 If Passcode* input is required on the display of the Bluetooth device, input “0000.”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”Tip To pair with other Bluetooth devices, repeat steps 2 to 6 for each device.Notes Pairing mode of the system is cancelled after about 5 minutes, and the Bluetooth indicator (blue) flashes. If the pairing mode is cancelled while performing this procedure, start over from step 3. Passcode of the system is fixed as “0000.” The system cannot be paired with a Bluetooth device whose Passcode is not “0000.” Once Bluetooth devices are paired, there is no need to pair those devices again. However, in the following case, you will need to perform the pairing procedure again.The system is paired with 9 or more devices.The system can be paired with up to 8 Bluetooth devices. If a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. More than one device can be paired with the system, but sound will be heard from just one of those devices.–PrecautionsNotes when using with a mobile phone For details on operation of your mobile phone when receiving a telephone call while transmitting the sound using the Bluetooth connection, refer to the operating instructions supplied with the mobile phone.On safetyNotes on the AC adaptor When connecting or disconnecting the AC adaptor, turn off the system beforehand. Otherwise, it may cause malfunction. Use only the supplied AC adaptor. To avoid damaging the system, do not use any other AC adaptor.Polarity of the plug Plug the AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it from the wall outlet (mains) immediately. Do not install the AC adaptor in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor.On placement Do not set the speaker in an inclined position. Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.On operation Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of the system. The system may short out or malfunction.On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet.Others If you have any questions or problems concerning this system that are not covered in this manual, please consult your nearest Sony dealer.What is Bluetooth Wireless Technology?Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Bluetooth wireless technology operates within a range of about 10 m.Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.Communication system and Compatible Bluetooth profiles of the systemProfile is standardisation of the function for each Bluetooth device specification. The system supports the following Bluetooth version and profiles:Communication System:Bluetooth Specification version 3.0Compatible Bluetooth Profiles:A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality.AVRCP (Audio Video Remote Control Profile): Controlling the volume.HSP (Headset Profile): Talking on the phone/Operating the phone.HFP (Hands-free Profile): Talking on the phone/Operating the phone by hands-free.Maximum communication rangeUse Bluetooth devices within 10 m (line of sight) of the system.Maximum communication range may shorten under the following conditions.There is an obstacle such as a person, metal, or wall between the system and Bluetooth device.A wireless LAN device is in use near the system.A microwave oven is in use near the system.A device that generates electromagnetic radiation is in use near the system.Interference from other devicesBecause Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. In such a case, perform the following.Use the system at least 10 m away from the wireless LAN device.If the system is used within 10 m of a wireless LAN device, turn off the wireless LAN device.Interference to other devicesMicrowaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off the system and other Bluetooth devices in the following locations, as it may cause an accident.where inflammable gas is present, in a hospital, train, airplane, or a gas stationnear automatic doors or a fire alarmNotes To be able to use the Bluetooth function, the Bluetooth device to be connected requires the same profile as the system’s.Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of Bluetooth wireless technology, the sound played on the system is slightly delayed from the sound played on the Bluetooth device during talking on the telephone or listening to the music. This system supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. Noise or sound skips may occur depending on the Bluetooth device connected with the system, the communication environment or the usage environment.––––––––––––Pattern B Connecting with a paired Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes. If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.Tip In the case of the last-connected Bluetooth device, the system tries to re-establish Bluetooth connection with it if the device’s Bluetooth function is on. When Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.3 Select “SRS-BTX500” shown in the display of the Bluetooth device.If necessary, select a Bluetooth profile that the system supports from the following: A2DP, HSP or HFP. For details on each profile, see “What is Bluetooth Wireless Technology?”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.Notes This step may not be necessary for some devices. If the system cannot connect to the Bluetooth device, delete "SRS-BTX500" from the Bluetooth device, then perform pairing again.Bluetooth standby modeWhen the Bluetooth standby mode is set to ON, the system can be turned on and operated by a Bluetooth device.Note If the system is being powered by battery, even if the system is turned off, battery power will continue to be consumed if the BLUETOOTH STANDBY switch is set to ON.Pattern C Connecting with a smartphone by One touch (NFC)By just touching the system with an NFC compatible smartphone, the system is turned on automatically and then paired and connected with the smartphone.1 Download and install the app “NFC Easy Connect” on the smartphone.“NFC Easy Connect” is an original app by Sony for Android phones, and is available at Google Play Store. Search for “NFC Easy Connect” or scan the following two-dimensional code to download and install the free app. Communication fees are required to download the app.The app may not be downloadable in some country/regions.Tip For some smartphones, One touch connection may be available without downloading the app “NFC Easy Connect.” In that case, the operation and specifications may be different from the description here. For details, refer to the operating instructions supplied with the smartphone.By the two-dimensional code:Use a two-dimensional code reader app.Compatible smartphones Smartphones with the NFC function built-in(OS: Android 2.3.3 or later, excluding Android 3.x)About NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.2 Start the app “NFC Easy Connect” on the smartphone.Make sure that the application screen is displayed.3 Touch the system with the smartphone.Keep touching the smartphone on the N marked part of the system until the smartphone vibrates.Smartphone vibrates (system recognized)Follow the on-screen instructions to establish the connection.When the Bluetooth connection is established, the Bluetooth indicator (blue) stays on.Tips If it is difficult to establish the connection, try the following.Activate the app “NFC Easy Connect” and move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it. Touch the system with the smartphone again to disconnect. If you have multiple NFC compatible devices, just touch the smartphone to a different device to switch the connection to that device. For example, when your smartphone is connected with NFC compatible headphones, just touch the smartphone to the system to change the Bluetooth connection to the system (One touch connection switching).Listening to MusicYou can enjoy music wirelessly, via the Bluetooth function built in your devices.Operations may vary depending on the Bluetooth device. Refer also to the operating instructions supplied with your Bluetooth device.1 Make the Bluetooth connection between the system and the device.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth device, then adjust the volume.Set the volume of the Bluetooth device to a moderate level, and press the VOLUME –/+ buttons on the system.Auto power offThe system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).––Using Hands-free Calling While Listening to MusicYou can enjoy hands-free calling via Bluetooth connection with a Bluetooth mobile phone that has a music function and supports the Bluetooth profile A2DP, and HFP or HSP.If your Bluetooth mobile phone supports both HFP and HSP, set to HFP.Operations may vary depending on the Bluetooth mobile phone. Refer also to the operating instructions supplied with your mobile phone.1 Make the Bluetooth connection between the system and the mobile phone.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth mobile phone, then adjust the volume.Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system.To callOperate the Bluetooth mobile phone. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system.To receive a callWhen an incoming call arrives, the playback pauses and a ring tone is heard from the system. Press the (call) button on the system and talk using the microphone.Tips If no ring tone is heard from the system when incoming call arrives, stop playback and press the (call) button to talk. You can use the hands-free calling when playback is completed During a call, press the VOLUME –/+ buttons on the system to adjust the volume.Notes The sound is output from the left speaker only during a call. Use your smartphone at least 50 cm from the system. Noise may result if the system and smartphone are too close.To end a callPress the (call) button. If you were listening to music when the call arrived, it will be resumed when the call has finished.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).Unit button functions during a callAvailable functions may vary depending on the Bluetooth mobile phone, or the profiles supported by the Bluetooth mobile phone. Refer to the operating instructions supplied with the Bluetooth mobile phone.Status (call) buttonStandby  Press once to start voice dial (voice dial compatible mobile phones only). Press for about 2 seconds to redial the phone number that is dialed last time.Outgoing call  Press once to cancel outgoing call. Press for about 2 seconds to change call device between the system and mobile phone.Incoming call  Press once to answer call. Press for about 2 seconds to reject call.During call  Press once to finish call. Press for about 2 seconds to change call device between the system and mobile phone.Using Hands-free calling with another Bluetooth mobile phone while listening to musicThis system is compatible with Multipoint technology, which allows you to enjoy hands-free calling while listening to music from a Bluetooth-compatible music player. One touch connection (NFC) cannot be used in this procedure. Operations may vary depending on the Bluetooth device. This type of Bluetooth connection may not be established depending on the combination of the Bluetooth devices. Refer also to the operating instructions supplied with your Bluetooth devices.1 Make the Bluetooth connections between the system and a Bluetooth music player via A2DP, and between the system and a Bluetooth mobile phone via HFP or HSP.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.Tips To use only the calling function of a Bluetooth mobile phone that also has a music function, establish Bluetooth connection between the system and the mobile phone via HFP or HSP, not via A2DP. Depending on the Bluetooth mobile phone, while the Bluetooth connection is established via HFP or HSP, the other Bluetooth connection via A2DP may also be occupied by the same Bluetooth mobile phone. A Bluetooth music player cannot be connected with this system in this case.Note To make the same connection with the same devices after turning the system off, follow this procedure again.To Enjoy the Sound Effect SettingYou can enjoy sound effects as desired.1 Press the SOUND button to select the sound effect.The SOUND indicator (see below) shows the current sound effect setting.You can switch between effects by repeatedly pressing the SOUND button.Status Sound effectAmber High-quality bass sound will be heard (MEGA BASS). This setting is enabled by default when you first turn on the system.Green Surround sound will be heard (MEGA BASS+SURROUND).Off The sound effect is off.Tip The system remembers the last sound effect setting next time it is turned on.N-markBATTERY/CHARGE indicatorVOLUME −/+ buttons (call) buttonSOUND button/indicatorAUDIO IN button/indicatorBLUETOOTH -PAIRING buttonBluetooth indicator/ buttonIllumination lamp MicrophoneListening to Music by Wired Connection with a Portable Audio Device, etc.1 Connect the device to the system.Connecting cord (not supplied)(Stereo mini jack)2 Turn on the system.3 Turn on the connected device.4 Press the AUDIO IN button on the system.5 Operate the connected device.Set the volume of the connected device to a moderate level, then press the VOLUME –/+ buttons on the system. Notes You cannot play music only by connecting to the system with the connecting cord. Make sure to also press the AUDIO IN button. Hands-free calling is not available while you are listening to music from a device connecting to the system by the connected cord.Auto power off The system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.Charging USB Devices, such as Smartphones, via a USB Connection to the SystemYou can charge your smartphone by connecting to the DC OUT ONLY connector (USB) of the system. When using the system by the built-in battery only, you can also charge a smartphone from the battery of the system. Turn on the system in order to charge a USB device.USB cable(not supplied) Note This function is not for data communication by USB cable.Disposing of the SystemFor environment protection, remove the built-in lithium-ion battery pack from the system.Before removing the battery, drain the battery by removing the AC adaptor and using the system only with the battery.Take out the lithium-ion battery for recycling. Do not open the cabinet other than when disposing of the system.1 Turn off the system and remove the AC adaptor.2 Detach the cover of the bottom of the system to remove the battery.  Open the stand. Remove the 4 rubber covers from the bottom of the system. Remove the 4 screws. Remove the cover. Remove the connector plug from the system. Remove the battery.Note Be careful not to damage the code cover with metallic tweezers, etc. when you remove the battery pack from the system.SpecificationsSpeaker sectionSpeaker system Satellite speaker: Approx. 48mm (1 15/16 in) dia. × 2 Subwoofer: Approx. 80mm (3 1/4 in) dia. × 1 Enclosure type Satellite speaker: Sealed enclosure Subwoofer: Passive radiatorAmplifier sectionReference output powerUsing AC adaptor: 10W + 10W (Satellite speaker, at 1 % harmonic distortion, 1kHz, 6Ω) 20W (Subwoofer, at 1 % harmonic distortion, 100Hz, 4Ω) Using battery: 4W + 4W (Satellite speaker, at 10 % harmonic distortion, 1kHz, 6Ω) 8W (Subwoofer, at 10% harmonic distortion, 100Hz, 4Ω) BluetoothCommunication SystemBluetooth Specification version 3.0Output Bluetooth Specification Power Class 2Maximum communication rangeLine of sight approx. 10 m (30 ft)*1Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)Modulation methodFHSSCompatible Bluetooth Profiles*2A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile) HSP (Headset Profile)HFP (Hands-free Profile)Supported Codec*3SBC*4, AAC*5Transmission range (A2DP)20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.*3 Codec: Audio signal compression and conversion format*4 Subband Codec*5 Advanced Audio CodingMicrophoneType: Electret condenserDirectional characteristic: Omni directionalEffective frequency range: 50 Hz -10 kHzGeneralInput AUDIO IN jack (ø 3.5 mm stereo mini jack)DC OUT USB jack Type A (for charging the battery of a connected device) (5 V, Max.1.5 A)Power DC 15 V (using the supplied AC adaptor connected to AC 100 V - 240 V, 50 Hz/60 Hz power supply) or, using built-in lithium-ion batteryUsage life of lithium-ion battery (using the Bluetooth connection)approx. 6 hours*6Dimensions (including projecting parts and controls) Approx. 385.0 mm × 152.0 mm × 65.0 mm (15 1/4 in × 6 in × 2 5/8 in) (w/h/d) Mass Approx. 1,900g (5 lb 3 oz) including batterySupplied accessoriesAC adaptor (AC-E1530) (1) Operating Instructions (this document) (2)Bluetooth® Startup Guide (1) Warranty card(2) Carrying case (1)*6 Time may vary, depending on the temperature or conditions of use.Design and specifications are subject to change without notice.TroubleshootingNo sound / Sound from only one speaker / Low sound levelCheck that both this system and the connected device are turned on.If you are connecting a personal computer to the system, make sure the audio output setting of the computer is set for a Bluetooth device.Turn up the volume of the system and the connected device.Pair this system and the Bluetooth device again.Check that the connected device is being played back.If the connected device is monaural, sound will only be output from the left speaker.Check that both plugs of the connecting cord (not supplied) are firmly inserted into the system and the connected device.Distorted sound / Humming or noise in the system outputTurn down the volume of the connected device.Keep the system away from a TV.If the connected device has an equalizer function, set it to off.Switch the Bluetooth connection to A2DP by operating the Bluetooth device when HFP or HSP is set.Keep the system away from a microwave oven, wireless LAN, etc.If you connect a device with a built-in radio or tuner to this system, broadcasts may not be received, or sensitivity may be reduced. Locate the system farther away from the device and check that you can listen to the broadcasts satisfactorily.Bring this system and the Bluetooth device closer together. Remove any obstacle between this system and the Bluetooth device.Charge the system by connecting the AC adaptor if the BATTERY/CHARGE indicator flashes in green.Pairing is not possibleBring this system and the Bluetooth device to within 1 m of each other.If the Bluetooth indicator (blue) is not flashing quickly, press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.No voice / Low voice from recipientCheck that both this system and the connected device are turned on.Select HFP or HSP Bluetooth connection by operating the Bluetooth device.Check that output of the Bluetooth mobile phone is set for the system.Turn up the volume of the system and the connected device.One touch connection (NFC) is not possibleKeep the smartphone close to the system until the smartphone vibrates. If you fail, move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it.Check that the NFC function of the smartphone is set to on.NFC receiving sensitivity depends on the device. If you fail to connect with a smartphone by One touch several times, connect to the system by on-screen operation.Check that the “NFC Easy Connect” app is displayed on the smartphone.Lights upDC IN15V jackAUDIO IN jack BLUETOOTH STANDBY switchRESET buttonDC OUT ONLY connector (USB)Stand11/30 UC7 4校 変更箇所を青でマーキングしました。
SRS-BTX500 [UC7] 4-457-524-11(1)Personal Audio System©2013 Sony Corporation Printed in China4-457-524-11 (1)SRS-BTX500Function of PartsBATTERY/CHARGE indicator Lights up, flashes or turns off depending on the status of the system.For details, see the following section, “Indications of BATTERY/CHARGE indicator.”N-markTouch to make Bluetooth connection with an NFC compatible smartphone. (call) buttonPress to call or operate during a call.VOLUME −/+ buttonsAdjusts the volume. Illumination lampLights up in a variety of colors depending on the status of the system. For details, see the following section, “Indications of Illumination lamp.”MicrophoneUse during a call.StandOpen to use the system.DC IN 15V jackConnects the supplied AC adaptor.AUDIO IN jackConnects to the headphone jack of a portable audio device,computer, etc., using a connecting cord (not supplied).BLUETOOTH STANDBY switchTurns on and off the Bluetooth standby mode.RESET buttonResets the system.DC OUT ONLY connector (USB)Charges devices, such as your smartphone, etc. by connecting to the DC OUT ONLY connector (USB connector).SOUND buttonPress to select a sound effect.SOUND indicatorLights up, according to the sound effect setting.AUDIO IN buttonPress to listen to sound from a device connected by a connecting cord (not supplied).AUDIO IN indicator (amber)Lights up in AUDIO IN mode.BLUETOOTH-PAIRING buttonPress to pair with a Bluetooth device.Bluetooth indicator (blue)Lights up, flashes or turns off depending on the communication status.For details, see the following section, “Indications of the Bluetooth function.”/ buttonTurns the system on/off.Indications of BATTERY/CHARGE indicator (built-in lithium-ion battery)Status BATTERY/CHARGE indicatorSystem turned on Lights up (green) (battery operation only)Battery requires charging Flashes (green)Charging battery Lights up (amber)Charging complete Off Indications of Illumination lampStatus Illumination lampAUDIO IN mode Lights up (white)Searching for a device Lights up (white)Connecting to Bluetooth deviceLights up (blue)Pressing VOLUME−/+ buttonsFlashes once (white)When the volume hits the maximum or minimumFlashes three times (white)Tip To turn the illumination on/off, hold down the BLUETOOTH-PAIRING button, then press and hold the / button.Indications of the Bluetooth functionStatus Bluetooth indicator (blue)Pairing with a device Flashes quicklySearching for a device FlashesConnected to a device Lights upBluetooth standby mode Flashes slowlyOpening the StandThe system stands itself by opening the stand.To close the standClose the stand to the opposite way of arrow.Turning the System on and off/Charging the systemThis system can operate by AC adaptor or built-in lithium-ion battery (rechargeable). Charge the battery before using the system for the first time.1 Connect the supplied AC adaptor.The BATTERY/CHARGE indicator (amber) lights up when the battery is being charged, and turns off when charging is complete. It takes approximately 4 hours to charge the battery.2 Press the / button.Tip You can operate the system by battery instead of the AC adaptor by charging the system before use.Notes When the BATTERY/CHARGE indicator flashes as below, charge the system. In these cases, you cannot charge devices via the DC OUT ONLY connector.Flashes (green) (Battery power is low).Flashes (amber), then turns off after turning on the system (No battery power remaining). When you switch the power source between AC adaptor and battery by connecting/disconnecting the AC adaptor, the system stops sound output for a short while. This is not a malfunction. The maximum power output will be lower when the AC adaptor is disconnected. In an extremely cold or hot environment, note the following points.When operating by the AC adaptor, charging may complete too quickly, or may not be possible.When operating on battery only, the system may stop after the BATTERY/CHARGE indicator flashes (green) three times. Charge the battery at least twice a year.To reset the systemPress the RESET button on the rear of the system with a pointed object if the buttons on the system do not function.––––Operating InstructionsEnglish Personal Audio SystemBefore operating the system, please read this guide thoroughly and retain it for future reference.Owner’s Record e serial number is located on the bottom.Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. SRS-BTX500Serial No. ________________________________For customers in the USAPlease register this product on line at http://www.sony.com/productregistrationProper registration will enable us to send you periodic updates about new products, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modi cation.  ank you.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.As the main plug of AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.The nameplate and important information concerning safety are located on the bottom exterior of the main unit and on the surface of the AC adaptor.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Dispose of used battery promptly, according to local environmental laws and guidelines in force. Keep away from children.For the State of California, USA onlyPerchlorate Material - special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material : Lithium battery contains perchlorate.On Copyrights and LicensesThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.Android is a trademark of Google Inc.iPhone is a trademark of Apple Inc., registered in theU.S.and other countries.Other trademarks and trade names are those of their respective owners.NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.For the customers in the USA and CanadaRECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/Caution: Do not handle damaged or leaking Lithium-Ion batteries.How to Make Wireless Connection with Bluetooth DevicesYou can enjoy music and hands-free calling with the system wirelessly by using your device’s Bluetooth function.Choose one of the following three connection methods, best suited for the Bluetooth device. For details on how to operate your device, refer to the operating instructions supplied with the device.Pairing with a Bluetooth device: see Pattern ABluetooth devices need to be “paired” with each other beforehand.Connecting with a paired device: see Pattern BTo listen to music with a Bluetooth device that has been paired, see this pattern.One touch connection with a smartphone (NFC):see Pattern CUsing an NFC compatible smartphone, you can establish a Bluetooth connection by just touching the system with it.Check the following before operating the system. Both the system and the device are placed within 1 m of each other. The system is connected to the AC adaptor, or the battery is sufficiently charged. The operating instructions supplied with the device are at hand.Pattern A Pairing and connecting with a Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes.If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.For details, refer to the operating instructions supplied with the device.3 Press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.The Bluetooth indicator (blue) begins to flash quickly and pairing mode is entered. Tip When the system is turned on first time, the Bluetooth indicator (blue) starts flashing quickly.Flashes quickly4 Perform the pairing procedure on the Bluetooth device to detect the system.5 Select “SRS-BTX500” shown in the display of the Bluetooth device.If “SRS- BTX500” does not appear on the device’s display, repeat from step 2.Note Some devices cannot display a list of detected devices.6 If Passcode* input is required on the display of the Bluetooth device, input “0000.”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”Tip To pair with other Bluetooth devices, repeat steps 2 to 6 for each device.Notes Pairing mode of the system is cancelled after about 5 minutes, and the Bluetooth indicator (blue) flashes. If the pairing mode is cancelled while performing this procedure, start over from step 3. Passcode of the system is fixed as “0000.” The system cannot be paired with a Bluetooth device whose Passcode is not “0000.” Once Bluetooth devices are paired, there is no need to pair those devices again. However, in the following case, you will need to perform the pairing procedure again.The system is paired with 9 or more devices.The system can be paired with up to 8 Bluetooth devices. If a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. More than one device can be paired with the system, but sound will be heard from just one of those devices.–PrecautionsNotes when using with a mobile phone For details on operation of your mobile phone when receiving a telephone call while transmitting the sound using the Bluetooth connection, refer to the operating instructions supplied with the mobile phone.On safetyNotes on the AC adaptor When connecting or disconnecting the AC adaptor, turn off the system beforehand. Otherwise, it may cause malfunction. Use only the supplied AC adaptor. To avoid damaging the system, do not use any other AC adaptor.Polarity of the plug Plug the AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it from the wall outlet (mains) immediately. Do not install the AC adaptor in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor.On placement Do not set the speaker in an inclined position. Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.On operation Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of the system. The system may short out or malfunction.On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet.Others If you have any questions or problems concerning this system that are not covered in this manual, please consult your nearest Sony dealer.What is Bluetooth Wireless Technology?Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Bluetooth wireless technology operates within a range of about 10 m.Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.Communication system and Compatible Bluetooth profiles of the systemProfile is standardisation of the function for each Bluetooth device specification. The system supports the following Bluetooth version and profiles:Communication System:Bluetooth Specification version 3.0Compatible Bluetooth Profiles:A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality.AVRCP (Audio Video Remote Control Profile): Controlling the volume.HSP (Headset Profile): Talking on the phone/Operating the phone.HFP (Hands-free Profile): Talking on the phone/Operating the phone by hands-free.Maximum communication rangeUse Bluetooth devices within 10 m (line of sight) of the system.Maximum communication range may shorten under the following conditions.There is an obstacle such as a person, metal, or wall between the system and Bluetooth device.A wireless LAN device is in use near the system.A microwave oven is in use near the system.A device that generates electromagnetic radiation is in use near the system.Interference from other devicesBecause Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. In such a case, perform the following.Use the system at least 10 m away from the wireless LAN device.If the system is used within 10 m of a wireless LAN device, turn off the wireless LAN device.Interference to other devicesMicrowaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off the system and other Bluetooth devices in the following locations, as it may cause an accident.where inflammable gas is present, in a hospital, train, airplane, or a gas stationnear automatic doors or a fire alarmNotes To be able to use the Bluetooth function, the Bluetooth device to be connected requires the same profile as the system’s.Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of Bluetooth wireless technology, the sound played on the system is slightly delayed from the sound played on the Bluetooth device during talking on the telephone or listening to the music. This system supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. Noise or sound skips may occur depending on the Bluetooth device connected with the system, the communication environment or the usage environment.––––––––––––Pattern B Connecting with a paired Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes. If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.Tip In the case of the last-connected Bluetooth device, the system tries to re-establish Bluetooth connection with it if the device’s Bluetooth function is on. When Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.3 Select “SRS-BTX500” shown in the display of the Bluetooth device.If necessary, select a Bluetooth profile that the system supports from the following: A2DP, HSP or HFP. For details on each profile, see “What is Bluetooth Wireless Technology?”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.Notes This step may not be necessary for some devices. If the system cannot connect to the Bluetooth device, delete "SRS-BTX500" from the Bluetooth device, then perform pairing again.Bluetooth standby modeWhen the Bluetooth standby mode is set to ON, the system can be turned on and operated by a Bluetooth device.Note If the system is being powered by battery, even if the system is turned off, battery power will continue to be consumed if the BLUETOOTH STANDBY switch is set to ON.Pattern C Connecting with a smartphone by One touch (NFC)By just touching the system with an NFC compatible smartphone, the system is turned on automatically and then paired and connected with the smartphone.1 Download and install the app “NFC Easy Connect” on the smartphone.“NFC Easy Connect” is an original app by Sony for Android phones, and is available at Google Play Store. Search for “NFC Easy Connect” or scan the following two-dimensional code to download and install the free app. Communication fees are required to download the app.The app may not be downloadable in some country/regions.Tip For some smartphones, One touch connection may be available without downloading the app “NFC Easy Connect.” In that case, the operation and specifications may be different from the description here. For details, refer to the operating instructions supplied with the smartphone.By the two-dimensional code:Use a two-dimensional code reader app.Compatible smartphones Smartphones with the NFC function built-in(OS: Android 2.3.3 or later, excluding Android 3.x)About NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.2 Start the app “NFC Easy Connect” on the smartphone.Make sure that the application screen is displayed.3 Touch the system with the smartphone.Keep touching the smartphone on the N marked part of the system until the smartphone vibrates.Smartphone vibrates (system recognized)Follow the on-screen instructions to establish the connection.When the Bluetooth connection is established, the Bluetooth indicator (blue) stays on.Tips If it is difficult to establish the connection, try the following.Activate the app “NFC Easy Connect” and move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it. Touch the system with the smartphone again to disconnect. If you have multiple NFC compatible devices, just touch the smartphone to a different device to switch the connection to that device. For example, when your smartphone is connected with NFC compatible headphones, just touch the smartphone to the system to change the Bluetooth connection to the system (One touch connection switching).Listening to MusicYou can enjoy music wirelessly, via the Bluetooth function built in your devices.Operations may vary depending on the Bluetooth device. Refer also to the operating instructions supplied with your Bluetooth device.1 Make the Bluetooth connection between the system and the device.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth device, then adjust the volume.Set the volume of the Bluetooth device to a moderate level, and press the VOLUME –/+ buttons on the system.Auto power offThe system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).––Using Hands-free Calling While Listening to MusicYou can enjoy hands-free calling via Bluetooth connection with a Bluetooth mobile phone that has a music function and supports the Bluetooth profile A2DP, and HFP or HSP.If your Bluetooth mobile phone supports both HFP and HSP, set to HFP.Operations may vary depending on the Bluetooth mobile phone. Refer also to the operating instructions supplied with your mobile phone.1 Make the Bluetooth connection between the system and the mobile phone.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth mobile phone, then adjust the volume.Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system.To callOperate the Bluetooth mobile phone. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system.To receive a callWhen an incoming call arrives, the playback pauses and a ring tone is heard from the system. Press the (call) button on the system and talk using the microphone.Tips If no ring tone is heard from the system when incoming call arrives, stop playback and press the (call) button to talk. You can use the hands-free calling when playback is completed During a call, press the VOLUME –/+ buttons on the system to adjust the volume.Notes The sound is output from the left speaker only during a call. Use your smartphone at least 50 cm from the system. Noise may result if the system and smartphone are too close.To end a callPress the (call) button. If you were listening to music when the call arrived, it will be resumed when the call has finished.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).Unit button functions during a callAvailable functions may vary depending on the Bluetooth mobile phone, or the profiles supported by the Bluetooth mobile phone. Refer to the operating instructions supplied with the Bluetooth mobile phone.Status (call) buttonStandby  Press once to start voice dial (voice dial compatible mobile phones only). Press for about 2 seconds to redial the phone number that is dialed last time.Outgoing call  Press once to cancel outgoing call. Press for about 2 seconds to change call device between the system and mobile phone.Incoming call  Press once to answer call. Press for about 2 seconds to reject call.During call  Press once to finish call. Press for about 2 seconds to change call device between the system and mobile phone.Using Hands-free calling with another Bluetooth mobile phone while listening to musicThis system is compatible with Multipoint technology, which allows you to enjoy hands-free calling while listening to music from a Bluetooth-compatible music player. One touch connection (NFC) cannot be used in this procedure. Operations may vary depending on the Bluetooth device. This type of Bluetooth connection may not be established depending on the combination of the Bluetooth devices. Refer also to the operating instructions supplied with your Bluetooth devices.1 Make the Bluetooth connections between the system and a Bluetooth music player via A2DP, and between the system and a Bluetooth mobile phone via HFP or HSP.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.Tips To use only the calling function of a Bluetooth mobile phone that also has a music function, establish Bluetooth connection between the system and the mobile phone via HFP or HSP, not via A2DP. Depending on the Bluetooth mobile phone, while the Bluetooth connection is established via HFP or HSP, the other Bluetooth connection via A2DP may also be occupied by the same Bluetooth mobile phone. A Bluetooth music player cannot be connected with this system in this case.Note To make the same connection with the same devices after turning the system off, follow this procedure again.To Enjoy the Sound Effect SettingYou can enjoy sound effects as desired.1 Press the SOUND button to select the sound effect.The SOUND indicator (see below) shows the current sound effect setting.You can switch between effects by repeatedly pressing the SOUND button.Status Sound effectAmber High-quality bass sound will be heard (MEGA BASS). This setting is enabled by default when you first turn on the system.Green Surround sound will be heard (MEGA BASS+SURROUND).Off The sound effect is off.Tip The system remembers the last sound effect setting next time it is turned on.N-markBATTERY/CHARGE indicatorVOLUME −/+ buttons (call) buttonSOUND button/indicatorAUDIO IN button/indicatorBLUETOOTH -PAIRING buttonBluetooth indicator/ buttonIllumination lamp MicrophoneListening to Music by Wired Connection with a Portable Audio Device, etc.1 Connect the device to the system.Connecting cord (not supplied)(Stereo mini jack)2 Turn on the system.3 Turn on the connected device.4 Press the AUDIO IN button on the system.5 Operate the connected device.Set the volume of the connected device to a moderate level, then press the VOLUME –/+ buttons on the system. Notes You cannot play music only by connecting to the system with the connecting cord. Make sure to also press the AUDIO IN button. Hands-free calling is not available while you are listening to music from a device connecting to the system by the connected cord.Auto power off The system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.Charging USB Devices, such as Smartphones, via a USB Connection to the SystemYou can charge your smartphone by connecting to the DC OUT ONLY connector (USB) of the system. When using the system by the built-in battery only, you can also charge a smartphone from the battery of the system. Turn on the system in order to charge a USB device.USB cable(not supplied) Note This function is not for data communication by USB cable.Disposing of the SystemFor environment protection, remove the built-in lithium-ion battery pack from the system.Before removing the battery, drain the battery by removing the AC adaptor and using the system only with the battery.Take out the lithium-ion battery for recycling. Do not open the cabinet other than when disposing of the system.1 Turn off the system and remove the AC adaptor.2 Detach the cover of the bottom of the system to remove the battery.  Open the stand. Remove the 4 rubber covers from the bottom of the system. Remove the 4 screws. Remove the cover. Remove the connector plug from the system. Remove the battery.Note Be careful not to damage the code cover with metallic tweezers, etc. when you remove the battery pack from the system.SpecificationsSpeaker sectionSpeaker system Satellite speaker: Approx. 48mm (1 15/16 in) dia. × 2 Subwoofer: Approx. 80mm (3 1/4 in) dia. × 1 Enclosure type Satellite speaker: Sealed enclosure Subwoofer: Passive radiatorAmplifier sectionReference output powerUsing AC adaptor: 10W + 10W (Satellite speaker, at 1 % harmonic distortion, 1kHz, 6Ω) 20W (Subwoofer, at 1 % harmonic distortion, 100Hz, 4Ω) Using battery: 4W + 4W (Satellite speaker, at 10 % harmonic distortion, 1kHz, 6Ω) 8W (Subwoofer, at 10% harmonic distortion, 100Hz, 4Ω) BluetoothCommunication SystemBluetooth Specification version 3.0Output Bluetooth Specification Power Class 2Maximum communication rangeLine of sight approx. 10 m (30 ft)*1Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)Modulation methodFHSSCompatible Bluetooth Profiles*2A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile) HSP (Headset Profile)HFP (Hands-free Profile)Supported Codec*3SBC*4, AAC*5Transmission range (A2DP)20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.*3 Codec: Audio signal compression and conversion format*4 Subband Codec*5 Advanced Audio CodingMicrophoneType: Electret condenserDirectional characteristic: Omni directionalEffective frequency range: 50 Hz -10 kHzGeneralInput AUDIO IN jack (ø 3.5 mm stereo mini jack)DC OUT USB jack Type A (for charging the battery of a connected device) (5 V, Max.1.5 A)Power DC 15 V (using the supplied AC adaptor connected to AC 100 V - 240 V, 50 Hz/60 Hz power supply) or, using built-in lithium-ion batteryUsage life of lithium-ion battery (using the Bluetooth connection)approx. 6 hours*6Dimensions (including projecting parts and controls) Approx. 385.0 mm × 152.0 mm × 65.0 mm (15 1/4 in × 6 in × 2 5/8 in) (w/h/d) Mass Approx. 1,900g (5 lb 3 oz) including batterySupplied accessoriesAC adaptor (AC-E1530) (1) Operating Instructions (this document) (2)Bluetooth® Startup Guide (1) Warranty card(2) Carrying case (1)*6 Time may vary, depending on the temperature or conditions of use.Design and specifications are subject to change without notice.TroubleshootingNo sound / Sound from only one speaker / Low sound levelCheck that both this system and the connected device are turned on.If you are connecting a personal computer to the system, make sure the audio output setting of the computer is set for a Bluetooth device.Turn up the volume of the system and the connected device.Pair this system and the Bluetooth device again.Check that the connected device is being played back.If the connected device is monaural, sound will only be output from the left speaker.Check that both plugs of the connecting cord (not supplied) are firmly inserted into the system and the connected device.Distorted sound / Humming or noise in the system outputTurn down the volume of the connected device.Keep the system away from a TV.If the connected device has an equalizer function, set it to off.Switch the Bluetooth connection to A2DP by operating the Bluetooth device when HFP or HSP is set.Keep the system away from a microwave oven, wireless LAN, etc.If you connect a device with a built-in radio or tuner to this system, broadcasts may not be received, or sensitivity may be reduced. Locate the system farther away from the device and check that you can listen to the broadcasts satisfactorily.Bring this system and the Bluetooth device closer together. Remove any obstacle between this system and the Bluetooth device.Charge the system by connecting the AC adaptor if the BATTERY/CHARGE indicator flashes in green.Pairing is not possibleBring this system and the Bluetooth device to within 1 m of each other.If the Bluetooth indicator (blue) is not flashing quickly, press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.No voice / Low voice from recipientCheck that both this system and the connected device are turned on.Select HFP or HSP Bluetooth connection by operating the Bluetooth device.Check that output of the Bluetooth mobile phone is set for the system.Turn up the volume of the system and the connected device.One touch connection (NFC) is not possibleKeep the smartphone close to the system until the smartphone vibrates. If you fail, move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it.Check that the NFC function of the smartphone is set to on.NFC receiving sensitivity depends on the device. If you fail to connect with a smartphone by One touch several times, connect to the system by on-screen operation.Check that the “NFC Easy Connect” app is displayed on the smartphone.Lights upDC IN15V jackAUDIO IN jack BLUETOOTH STANDBY switchRESET buttonDC OUT ONLY connector (USB)Stand
SRS-BTX500 [UC7] 4-457-524-11(1)Personal Audio System©2013 Sony Corporation Printed in China4-457-524-11 (1)SRS-BTX500Function of PartsBATTERY/CHARGE indicator Lights up, flashes or turns off depending on the status of the system.For details, see the following section, “Indications of BATTERY/CHARGE indicator.”N-markTouch to make Bluetooth connection with an NFC compatible smartphone. (call) buttonPress to call or operate during a call.VOLUME −/+ buttonsAdjusts the volume. Illumination lampLights up in a variety of colors depending on the status of the system. For details, see the following section, “Indications of Illumination lamp.”MicrophoneUse during a call.StandOpen to use the system.DC IN 15V jackConnects the supplied AC adaptor.AUDIO IN jackConnects to the headphone jack of a portable audio device,computer, etc., using a connecting cord (not supplied).BLUETOOTH STANDBY switchTurns on and off the Bluetooth standby mode.RESET buttonResets the system.DC OUT ONLY connector (USB)Charges devices, such as your smartphone, etc. by connecting to the DC OUT ONLY connector (USB connector).SOUND buttonPress to select a sound effect.SOUND indicatorLights up, according to the sound effect setting.AUDIO IN buttonPress to listen to sound from a device connected by a connecting cord (not supplied).AUDIO IN indicator (amber)Lights up in AUDIO IN mode.BLUETOOTH-PAIRING buttonPress to pair with a Bluetooth device.Bluetooth indicator (blue)Lights up, flashes or turns off depending on the communication status.For details, see the following section, “Indications of the Bluetooth function.”/ buttonTurns the system on/off.Indications of BATTERY/CHARGE indicator (built-in lithium-ion battery)Status BATTERY/CHARGE indicatorSystem turned on Lights up (green) (battery operation only)Battery requires charging Flashes (green)Charging battery Lights up (amber)Charging complete Off Indications of Illumination lampStatus Illumination lampAUDIO IN mode Lights up (white)Searching for a device Lights up (white)Connecting to Bluetooth deviceLights up (blue)Pressing VOLUME−/+ buttonsFlashes once (white)When the volume hits the maximum or minimumFlashes three times (white)Tip To turn the illumination on/off, hold down the BLUETOOTH-PAIRING button, then press and hold the / button.Indications of the Bluetooth functionStatus Bluetooth indicator (blue)Pairing with a device Flashes quicklySearching for a device FlashesConnected to a device Lights upBluetooth standby mode Flashes slowlyOpening the StandThe system stands itself by opening the stand.To close the standClose the stand to the opposite way of arrow.Turning the System on and off/Charging the systemThis system can operate by AC adaptor or built-in lithium-ion battery (rechargeable). Charge the battery before using the system for the first time.1 Connect the supplied AC adaptor.The BATTERY/CHARGE indicator (amber) lights up when the battery is being charged, and turns off when charging is complete. It takes approximately 4 hours to charge the battery.2 Press the / button.Tip You can operate the system by battery instead of the AC adaptor by charging the system before use.Notes When the BATTERY/CHARGE indicator flashes as below, charge the system. In these cases, you cannot charge devices via the DC OUT ONLY connector.Flashes (green) (Battery power is low).Flashes (amber), then turns off after turning on the system (No battery power remaining). When you switch the power source between AC adaptor and battery by connecting/disconnecting the AC adaptor, the system stops sound output for a short while. This is not a malfunction. The maximum power output will be lower when the AC adaptor is disconnected. In an extremely cold or hot environment, note the following points.When operating by the AC adaptor, charging may complete too quickly, or may not be possible.When operating on battery only, the system may stop after the BATTERY/CHARGE indicator flashes (green) three times. Charge the battery at least twice a year.To reset the systemPress the RESET button on the rear of the system with a pointed object if the buttons on the system do not function.––––Operating InstructionsEnglish Personal Audio SystemBefore operating the system, please read this guide thoroughly and retain it for future reference.Owner’s Record e serial number is located on the bottom.Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. SRS-BTX500Serial No. ________________________________For customers in the USAPlease register this product on line at http://www.sony.com/productregistrationProper registration will enable us to send you periodic updates about new products, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modi cation.  ank you.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.As the main plug of AC adaptor is used to disconnect the AC adaptor from the mains, connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet immediately.The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.The nameplate and important information concerning safety are located on the bottom exterior of the main unit and on the surface of the AC adaptor.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.This Class B digital apparatus complies with Canadian ICES-003.Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Dispose of used battery promptly, according to local environmental laws and guidelines in force. Keep away from children.For the State of California, USA onlyPerchlorate Material - special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchloratePerchlorate Material : Lithium battery contains perchlorate.On Copyrights and LicensesThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.Android is a trademark of Google Inc.iPhone is a trademark of Apple Inc., registered in theU.S.and other countries.Other trademarks and trade names are those of their respective owners.NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:— Reorient or relocate the receiving antenna.— Increase the separation between the equipment and receiver.— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.— Consult the dealer or an experienced radio/TV technician for help.For the customers in the USA and CanadaRECYCLING LITHIUM-ION BATTERIESLithium-Ion batteries are recyclable.You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/Caution: Do not handle damaged or leaking Lithium-Ion batteries.How to Make Wireless Connection with Bluetooth DevicesYou can enjoy music and hands-free calling with the system wirelessly by using your device’s Bluetooth function.Choose one of the following three connection methods, best suited for the Bluetooth device. For details on how to operate your device, refer to the operating instructions supplied with the device.Pairing with a Bluetooth device: see Pattern ABluetooth devices need to be “paired” with each other beforehand.Connecting with a paired device: see Pattern BTo listen to music with a Bluetooth device that has been paired, see this pattern.One touch connection with a smartphone (NFC):see Pattern CUsing an NFC compatible smartphone, you can establish a Bluetooth connection by just touching the system with it.Check the following before operating the system. Both the system and the device are placed within 1 m of each other. The system is connected to the AC adaptor, or the battery is sufficiently charged. The operating instructions supplied with the device are at hand.Pattern A Pairing and connecting with a Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes.If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.For details, refer to the operating instructions supplied with the device.3 Press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.The Bluetooth indicator (blue) begins to flash quickly and pairing mode is entered. Tip When the system is turned on first time, the Bluetooth indicator (blue) starts flashing quickly.Flashes quickly4 Perform the pairing procedure on the Bluetooth device to detect the system.5 Select “SRS-BTX500” shown in the display of the Bluetooth device.If “SRS- BTX500” does not appear on the device’s display, repeat from step 2.Note Some devices cannot display a list of detected devices.6 If Passcode* input is required on the display of the Bluetooth device, input “0000.”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”Tip To pair with other Bluetooth devices, repeat steps 2 to 6 for each device.Notes Pairing mode of the system is cancelled after about 5 minutes, and the Bluetooth indicator (blue) flashes. If the pairing mode is cancelled while performing this procedure, start over from step 3. Passcode of the system is fixed as “0000.” The system cannot be paired with a Bluetooth device whose Passcode is not “0000.” Once Bluetooth devices are paired, there is no need to pair those devices again. However, in the following case, you will need to perform the pairing procedure again.The system is paired with 9 or more devices.The system can be paired with up to 8 Bluetooth devices. If a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one. More than one device can be paired with the system, but sound will be heard from just one of those devices.–PrecautionsNotes when using with a mobile phone For details on operation of your mobile phone when receiving a telephone call while transmitting the sound using the Bluetooth connection, refer to the operating instructions supplied with the mobile phone.On safetyNotes on the AC adaptor When connecting or disconnecting the AC adaptor, turn off the system beforehand. Otherwise, it may cause malfunction. Use only the supplied AC adaptor. To avoid damaging the system, do not use any other AC adaptor.Polarity of the plug Plug the AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it from the wall outlet (mains) immediately. Do not install the AC adaptor in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire or electric shock, do not expose the AC adaptor to dripping or splashing, and do not place objects filled with liquids, such as vases, on the AC adaptor.On placement Do not set the speaker in an inclined position. Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.On operation Do not insert any small objects, etc., into the jacks or ventilation hole on the rear of the system. The system may short out or malfunction.On cleaning Do not use alcohol, benzine, or thinner to clean the cabinet.Others If you have any questions or problems concerning this system that are not covered in this manual, please consult your nearest Sony dealer.What is Bluetooth Wireless Technology?Bluetooth wireless technology is a short-range wireless technology that enables wireless data communication between digital devices, such as a computer and digital camera. Bluetooth wireless technology operates within a range of about 10 m.Connecting two devices as necessary is common, but some devices can be connected to multiple devices at the same time.You do not need to use a cable for connection, nor is it necessary for the devices to face one another, such is the case with infrared technology. For example, you can use such a device in a bag or pocket.Bluetooth standard is an international standard supported by thousands of companies all over the world, and employed by various companies worldwide.Communication system and Compatible Bluetooth profiles of the systemProfile is standardisation of the function for each Bluetooth device specification. The system supports the following Bluetooth version and profiles:Communication System:Bluetooth Specification version 3.0Compatible Bluetooth Profiles:A2DP (Advanced Audio Distribution Profile): Transmitting or receiving audio content of high-quality.AVRCP (Audio Video Remote Control Profile): Controlling the volume.HSP (Headset Profile): Talking on the phone/Operating the phone.HFP (Hands-free Profile): Talking on the phone/Operating the phone by hands-free.Maximum communication rangeUse Bluetooth devices within 10 m (line of sight) of the system.Maximum communication range may shorten under the following conditions.There is an obstacle such as a person, metal, or wall between the system and Bluetooth device.A wireless LAN device is in use near the system.A microwave oven is in use near the system.A device that generates electromagnetic radiation is in use near the system.Interference from other devicesBecause Bluetooth devices and wireless LAN (IEEE802.11b/g) use the same frequency, microwave interference may occur and resulting in communication speed deterioration, noise, or invalid connection if the system is used near a wireless LAN device. In such a case, perform the following.Use the system at least 10 m away from the wireless LAN device.If the system is used within 10 m of a wireless LAN device, turn off the wireless LAN device.Interference to other devicesMicrowaves emitting from a Bluetooth device may affect the operation of electronic medical devices. Turn off the system and other Bluetooth devices in the following locations, as it may cause an accident.where inflammable gas is present, in a hospital, train, airplane, or a gas stationnear automatic doors or a fire alarmNotes To be able to use the Bluetooth function, the Bluetooth device to be connected requires the same profile as the system’s.Note also that even if the same profile exists, devices may vary in function depending on their specifications. Due to the characteristic of Bluetooth wireless technology, the sound played on the system is slightly delayed from the sound played on the Bluetooth device during talking on the telephone or listening to the music. This system supports security capabilities that comply with the Bluetooth standard to provide a secure connection when the Bluetooth wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using Bluetooth wireless technology. We do not take any responsibility for the leakage of information during Bluetooth communication. A device featuring the Bluetooth function is required to conform to the Bluetooth standard specified by Bluetooth SIG, and be authenticated. Even if the connected device conforms to the above mentioned Bluetooth standard, some devices may not be connected or work correctly, depending on the features or specifications of the device. Noise or sound skips may occur depending on the Bluetooth device connected with the system, the communication environment or the usage environment.––––––––––––Pattern B Connecting with a paired Bluetooth device1 Turn on the system.The Bluetooth indicator (blue) flashes. If the AUDIO IN indicator (amber) lights up, press the BLUETOOTH-PAIRING button.2 Set the Bluetooth function of the Bluetooth device to on.Tip In the case of the last-connected Bluetooth device, the system tries to re-establish Bluetooth connection with it if the device’s Bluetooth function is on. When Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.3 Select “SRS-BTX500” shown in the display of the Bluetooth device.If necessary, select a Bluetooth profile that the system supports from the following: A2DP, HSP or HFP. For details on each profile, see “What is Bluetooth Wireless Technology?”The Bluetooth connection is established and the Bluetooth indicator (blue) on the system stays on.Notes This step may not be necessary for some devices. If the system cannot connect to the Bluetooth device, delete "SRS-BTX500" from the Bluetooth device, then perform pairing again.Bluetooth standby modeWhen the Bluetooth standby mode is set to ON, the system can be turned on and operated by a Bluetooth device.Note If the system is being powered by battery, even if the system is turned off, battery power will continue to be consumed if the BLUETOOTH STANDBY switch is set to ON.Pattern C Connecting with a smartphone by One touch (NFC)By just touching the system with an NFC compatible smartphone, the system is turned on automatically and then paired and connected with the smartphone.1 Download and install the app “NFC Easy Connect” on the smartphone.“NFC Easy Connect” is an original app by Sony for Android phones, and is available at Google Play Store. Search for “NFC Easy Connect” or scan the following two-dimensional code to download and install the free app. Communication fees are required to download the app.The app may not be downloadable in some country/regions.Tip For some smartphones, One touch connection may be available without downloading the app “NFC Easy Connect.” In that case, the operation and specifications may be different from the description here. For details, refer to the operating instructions supplied with the smartphone.By the two-dimensional code:Use a two-dimensional code reader app.Compatible smartphones Smartphones with the NFC function built-in(OS: Android 2.3.3 or later, excluding Android 3.x)About NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices.2 Start the app “NFC Easy Connect” on the smartphone.Make sure that the application screen is displayed.3 Touch the system with the smartphone.Keep touching the smartphone on the N marked part of the system until the smartphone vibrates.Smartphone vibrates (system recognized)Follow the on-screen instructions to establish the connection.When the Bluetooth connection is established, the Bluetooth indicator (blue) stays on.Tips If it is difficult to establish the connection, try the following.Activate the app “NFC Easy Connect” and move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it. Touch the system with the smartphone again to disconnect. If you have multiple NFC compatible devices, just touch the smartphone to a different device to switch the connection to that device. For example, when your smartphone is connected with NFC compatible headphones, just touch the smartphone to the system to change the Bluetooth connection to the system (One touch connection switching).Listening to MusicYou can enjoy music wirelessly, via the Bluetooth function built in your devices.Operations may vary depending on the Bluetooth device. Refer also to the operating instructions supplied with your Bluetooth device.1 Make the Bluetooth connection between the system and the device.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth device, then adjust the volume.Set the volume of the Bluetooth device to a moderate level, and press the VOLUME –/+ buttons on the system.Auto power offThe system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).––Using Hands-free Calling While Listening to MusicYou can enjoy hands-free calling via Bluetooth connection with a Bluetooth mobile phone that has a music function and supports the Bluetooth profile A2DP, and HFP or HSP.If your Bluetooth mobile phone supports both HFP and HSP, set to HFP.Operations may vary depending on the Bluetooth mobile phone. Refer also to the operating instructions supplied with your mobile phone.1 Make the Bluetooth connection between the system and the mobile phone.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.2 Start playback on the Bluetooth mobile phone, then adjust the volume.Set the volume of the Bluetooth mobile phone to a moderate level, and press the VOLUME –/+ buttons on the system.To callOperate the Bluetooth mobile phone. Check that a dialing tone is heard on the system and talk using the microphone. If no dialing tone is heard, press the (call) button on the system for about 2 seconds to change the call device to the system.To receive a callWhen an incoming call arrives, the playback pauses and a ring tone is heard from the system. Press the (call) button on the system and talk using the microphone.Tips If no ring tone is heard from the system when incoming call arrives, stop playback and press the (call) button to talk. You can use the hands-free calling when playback is completed During a call, press the VOLUME –/+ buttons on the system to adjust the volume.Notes The sound is output from the left speaker only during a call. Use your smartphone at least 50 cm from the system. Noise may result if the system and smartphone are too close.To end a callPress the (call) button. If you were listening to music when the call arrived, it will be resumed when the call has finished.After useDo any of the following. Set the Bluetooth function of the Bluetooth device off. For details, refer to the operating instructions supplied with the device. Turn off the Bluetooth device. Turn off the system. Touch the system with the smartphone again to disconnect (NFC compatible smartphones only).Unit button functions during a callAvailable functions may vary depending on the Bluetooth mobile phone, or the profiles supported by the Bluetooth mobile phone. Refer to the operating instructions supplied with the Bluetooth mobile phone.Status (call) buttonStandby  Press once to start voice dial (voice dial compatible mobile phones only). Press for about 2 seconds to redial the phone number that is dialed last time.Outgoing call  Press once to cancel outgoing call. Press for about 2 seconds to change call device between the system and mobile phone.Incoming call  Press once to answer call. Press for about 2 seconds to reject call.During call  Press once to finish call. Press for about 2 seconds to change call device between the system and mobile phone.Using Hands-free calling with another Bluetooth mobile phone while listening to musicThis system is compatible with Multipoint technology, which allows you to enjoy hands-free calling while listening to music from a Bluetooth-compatible music player. One touch connection (NFC) cannot be used in this procedure. Operations may vary depending on the Bluetooth device. This type of Bluetooth connection may not be established depending on the combination of the Bluetooth devices. Refer also to the operating instructions supplied with your Bluetooth devices.1 Make the Bluetooth connections between the system and a Bluetooth music player via A2DP, and between the system and a Bluetooth mobile phone via HFP or HSP.For details on the Bluetooth connection procedure, see “How to Make Wireless Connection with Bluetooth Devices.” When the Bluetooth connection is established, the Bluetooth indicator (blue) on the system stays on.Tips To use only the calling function of a Bluetooth mobile phone that also has a music function, establish Bluetooth connection between the system and the mobile phone via HFP or HSP, not via A2DP. Depending on the Bluetooth mobile phone, while the Bluetooth connection is established via HFP or HSP, the other Bluetooth connection via A2DP may also be occupied by the same Bluetooth mobile phone. A Bluetooth music player cannot be connected with this system in this case.Note To make the same connection with the same devices after turning the system off, follow this procedure again.To Enjoy the Sound Effect SettingYou can enjoy sound effects as desired.1 Press the SOUND button to select the sound effect.The SOUND indicator (see below) shows the current sound effect setting.You can switch between effects by repeatedly pressing the SOUND button.Status Sound effectAmber High-quality bass sound will be heard (MEGA BASS). This setting is enabled by default when you first turn on the system.Green Surround sound will be heard (MEGA BASS+SURROUND).Off The sound effect is off.Tip The system remembers the last sound effect setting next time it is turned on.N-markBATTERY/CHARGE indicatorVOLUME −/+ buttons (call) buttonSOUND button/indicatorAUDIO IN button/indicatorBLUETOOTH -PAIRING buttonBluetooth indicator/ buttonIllumination lamp MicrophoneListening to Music by Wired Connection with a Portable Audio Device, etc.1 Connect the device to the system.Connecting cord (not supplied)(Stereo mini jack)2 Turn on the system.3 Turn on the connected device.4 Press the AUDIO IN button on the system.5 Operate the connected device.Set the volume of the connected device to a moderate level, then press the VOLUME –/+ buttons on the system. Notes You cannot play music only by connecting to the system with the connecting cord. Make sure to also press the AUDIO IN button. Hands-free calling is not available while you are listening to music from a device connecting to the system by the connected cord.Auto power off The system automatically turns off after about 20 minutes when the hands-free is not being used (the system is not connected with a Bluetooth device via HFP/HSP), and when no device is being charged via the DC OUT ONLY connector, and when no music is being played.Charging USB Devices, such as Smartphones, via a USB Connection to the SystemYou can charge your smartphone by connecting to the DC OUT ONLY connector (USB) of the system. When using the system by the built-in battery only, you can also charge a smartphone from the battery of the system. Turn on the system in order to charge a USB device.USB cable(not supplied) Note This function is not for data communication by USB cable.Disposing of the SystemFor environment protection, remove the built-in lithium-ion battery pack from the system.Before removing the battery, drain the battery by removing the AC adaptor and using the system only with the battery.Take out the lithium-ion battery for recycling. Do not open the cabinet other than when disposing of the system.1 Turn off the system and remove the AC adaptor.2 Detach the cover of the bottom of the system to remove the battery.  Open the stand. Remove the 4 rubber covers from the bottom of the system. Remove the 4 screws. Remove the cover. Remove the connector plug from the system. Remove the battery.Note Be careful not to damage the code cover with metallic tweezers, etc. when you remove the battery pack from the system.SpecificationsSpeaker sectionSpeaker system Satellite speaker: Approx. 48mm (1 15/16 in) dia. × 2 Subwoofer: Approx. 80mm (3 1/4 in) dia. × 1 Enclosure type Satellite speaker: Sealed enclosure Subwoofer: Passive radiatorAmplifier sectionReference output powerUsing AC adaptor: 10W + 10W (Satellite speaker, at 1 % harmonic distortion, 1kHz, 6Ω) 20W (Subwoofer, at 1 % harmonic distortion, 100Hz, 4Ω) Using battery: 4W + 4W (Satellite speaker, at 10 % harmonic distortion, 1kHz, 6Ω) 8W (Subwoofer, at 10% harmonic distortion, 100Hz, 4Ω) BluetoothCommunication SystemBluetooth Specification version 3.0Output Bluetooth Specification Power Class 2Maximum communication rangeLine of sight approx. 10 m (30 ft)*1Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)Modulation methodFHSSCompatible Bluetooth Profiles*2A2DP (Advanced Audio Distribution Profile)AVRCP (Audio Video Remote Control Profile) HSP (Headset Profile)HFP (Hands-free Profile)Supported Codec*3SBC*4, AAC*5Transmission range (A2DP)20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance, operating system, software application, etc.*2 Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices.*3 Codec: Audio signal compression and conversion format*4 Subband Codec*5 Advanced Audio CodingMicrophoneType: Electret condenserDirectional characteristic: Omni directionalEffective frequency range: 50 Hz -10 kHzGeneralInput AUDIO IN jack (ø 3.5 mm stereo mini jack)DC OUT USB jack Type A (for charging the battery of a connected device) (5 V, Max.1.5 A)Power DC 15 V (using the supplied AC adaptor connected to AC 100 V - 240 V, 50 Hz/60 Hz power supply) or, using built-in lithium-ion batteryUsage life of lithium-ion battery (using the Bluetooth connection)approx. 6 hours*6Dimensions (including projecting parts and controls) Approx. 385.0 mm × 152.0 mm × 65.0 mm (15 1/4 in × 6 in × 2 5/8 in) (w/h/d) Mass Approx. 1,900g (5 lb 3 oz) including batterySupplied accessoriesAC adaptor (AC-E1530) (1) Operating Instructions (this document) (2)Bluetooth® Startup Guide (1) Warranty card(2) Carrying case (1)*6 Time may vary, depending on the temperature or conditions of use.Design and specifications are subject to change without notice.TroubleshootingNo sound / Sound from only one speaker / Low sound levelCheck that both this system and the connected device are turned on.If you are connecting a personal computer to the system, make sure the audio output setting of the computer is set for a Bluetooth device.Turn up the volume of the system and the connected device.Pair this system and the Bluetooth device again.Check that the connected device is being played back.If the connected device is monaural, sound will only be output from the left speaker.Check that both plugs of the connecting cord (not supplied) are firmly inserted into the system and the connected device.Distorted sound / Humming or noise in the system outputTurn down the volume of the connected device.Keep the system away from a TV.If the connected device has an equalizer function, set it to off.Switch the Bluetooth connection to A2DP by operating the Bluetooth device when HFP or HSP is set.Keep the system away from a microwave oven, wireless LAN, etc.If you connect a device with a built-in radio or tuner to this system, broadcasts may not be received, or sensitivity may be reduced. Locate the system farther away from the device and check that you can listen to the broadcasts satisfactorily.Bring this system and the Bluetooth device closer together. Remove any obstacle between this system and the Bluetooth device.Charge the system by connecting the AC adaptor if the BATTERY/CHARGE indicator flashes in green.Pairing is not possibleBring this system and the Bluetooth device to within 1 m of each other.If the Bluetooth indicator (blue) is not flashing quickly, press and hold the BLUETOOTH-PAIRING button on the system until two beeps are heard.No voice / Low voice from recipientCheck that both this system and the connected device are turned on.Select HFP or HSP Bluetooth connection by operating the Bluetooth device.Check that output of the Bluetooth mobile phone is set for the system.Turn up the volume of the system and the connected device.One touch connection (NFC) is not possibleKeep the smartphone close to the system until the smartphone vibrates. If you fail, move the smartphone slightly on the N marked part of the system.If the smartphone is in a case, remove it.Check that the NFC function of the smartphone is set to on.NFC receiving sensitivity depends on the device. If you fail to connect with a smartphone by One touch several times, connect to the system by on-screen operation.Check that the “NFC Easy Connect” app is displayed on the smartphone.Lights upDC IN15V jackAUDIO IN jack BLUETOOTH STANDBY switchRESET buttonDC OUT ONLY connector (USB)Stand

Navigation menu