Sony Group CBEH19C1 Computer Entertainment System User Manual DECH 3000A DECH S3000A

Sony Corporation Computer Entertainment System DECH 3000A DECH S3000A

UserManual.wiki >

CBEH19C1 User Manual >

Contents

1. User manual1
2. User manual2

User manual2

Debugging Station (for PlayStation®3)Instruction Manual / ợ䒌娎㕲㙜DECH-3000A / DECH-S3000A 4-299-854-11(1) ENWARNINGS• To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.• CAUTION– Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.– The use of optical instruments with this product will increase eye hazard.• This appliance is classiﬁ ed as a CLASS 1 LASER product under IEC60825-1:2007.CLASS 1LASERPRODUCTLASERKLASE1LUOKAN 1LASERLAITEKLASS 1LASERAPPARATPhotosensitivity/Epilepsy/SeizuresA very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or ﬂ ashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. These conditions may trigger previously undetected epileptic symptoms or seizures in persons who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition or has had seizures of any kind, consult your physician before playing.IMMEDIATELY DISCONTINUE use and consult your physician before resuming gameplay if you or your child experience any of the following health problems or symptoms:• dizziness,• altered vision,• eye or muscle twitches,• loss of awareness,• disorientation,• seizures, or• any involuntary movement or convulsion.RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR PHYSICIAN.Use and handling of video games to reduce the likelihood of a seizure• Use in a well-lit area and keep as far away as possible from the television screen.• Avoid large screen televisions. Use the smallest television screen available.• Avoid prolonged use of the system. Take a 15-minute break during each hour of play.• Avoid playing when you are tired or need sleep.Radio wavesRadio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries.• If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless networking feature.• Do not use the wireless networking feature in the following locations:– Areas where wireless network use is prohibited, such as in hospitals. Abide by medical institution regulations when using the system on their premises.– Areas near fire alarms, automatic doors and other types of automated equipment.3D imagesSome people may experience discomfort (such as eye strain, eye fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games on 3D televisions. If you experience such discomfort you should immediately discontinue use of your television until the discomfort subsides.SCE recommends that all viewers take regular breaks while watching 3D video, or playing stereoscopic 3D games. The length and frequency of necessary breaks may vary from person to person – please take breaks that are long enough to allow any feelings of discomfort to subside. If symptoms persist, consult your physician.When using any 3D enabled device with your PlayStation®3 system you should read the instruction manual for that device.For customers in the U.S.A. and CanadaThis equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated with at least 20 cm (8 in) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles).This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.You are cautioned that any changes or modiﬁ cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.If you have questions about this product, visit http://www.scedev.net, email Developer Support at dev_tools@playstation.sony.com or write to:Sony Computer Entertainment America LLCDeveloper Support919 East Hillsdale BoulevardFoster City, CA 94404-2175 USADeclaration of ConformityTrade Name : SONYModel No. : DECH-3000A, DECH-S3000AResponsible Party : Sony Electronics Inc.Address : 16530 Via Esprillo San Diego, CA 92127 U.S.A.Telephone No. : 858-942-2230This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Pour les utilisateurs aux États-Unis et au CanadaCet équipement est conforme aux limites d'exposition aux radiofréquences IC établies pour un environnement non contrôlé et se conforme aux exigences de conformité pour l'exposition aux RF IC, dans le supplément C à OET65 et CNR- 102. Cet équipement doit être installé et opéré à au moins 20 cm (8 po.) d'écart entre le radiateur et la personne physique (extrémités du corps non prises en compte : mains, poignets, pieds et chevilles).Ce transmetteur ne doit pas être utilisé conjointement ou placé avec tout autre transmetteur ou antenne.RemarqueCette unité a été testée et il a été déterminé qu’elle se conforme aux normes stipulées par l’article 15 des règlements de la FCC pour un appareil numérique de catégorie B. Ces normes sont établies aﬁ n d’offrir une protection raisonnable contre toute possibilité de brouillage préjudiciable dans une installation résidentielle. Cette unité produit, utilise et peut émettre une énergie radioélectrique, et si elle n’est pas installée et utilisée conformément aux instructions, pourrait causer un brouillage préjudiciable à la radiocommunication. Il est toutefois impossible de garantir qu’il n’y aura pas de brouillage préjudiciable dans une installation donnée. Si cette unité cause un brouillage préjudiciable à la réception radio ou télévisuelle, ce qui peut être déterminé en activant ou désactivant l’appareil, l’utilisateur est encouragé à tenter de corriger le brouillage en prenant l’une ou plusieurs des mesures proposées suivantes :– Réorienter ou déplacer l’antenne de réception.– Éloigner l’unité du récepteur.– Connecter l’appareil à une prise sur un autre circuit que celui auquel le récepteur est connecté.– Demander de l’aide au détaillant ou à un technicien radio/télévision spécialisé. Aucun changement ou modiﬁ cation n’est permis sans avoir été approuvé par les parties responsables des règlementations qui est en droit de refuser l’autorisation de l’utilisateur à utiliser ce produit.Pour toute question concernant ce produit, visitez http://www.scedev.net, envoyez un courriel au service d’Assistance aux développeurs à l’adresse dev_tools@playstation.sony.com ou envoyez un courrier à :Sony Computer Entertainment America LLCDeveloper Support919 East Hillsdale BoulevardFoster City, CA 94404-2175 USADéclaration de ConformitéNom commercial : SONYN° de modèle : DECH-3000A, DECH-S3000APartie responsable : Sony Electronics Inc.Adresse : 16530 Via Esprillo San Diego, CA 92127 U.S.A.N° de téléphone : 858-942-2230Cet appareil est conforme aux stipulations de l’article 15 des règlements de la FCC et CNR-Gen des règles IC. Son opération est sous réserve des deux conditions suivantes : (1) cet appareil ne peut pas causer de brouillage préjudiciable et (2) cet appareil doit accepter le brouillage préjudiciable reçu, y compris un brouillage qui pourrait causer son fonctionnement irrégulier.For customers in the U.S.A.The lithium coin memory back-up battery inside this product contains Perchlorate.The following statement is required by the State of California, USA:Perchlorate Material – special handling may apply. See http://www.dtsc.ca.gov/hazardouswaste/perchlorateFor customers in EuropeThis equipment has been tested and found to comply with the limits set out in the R&TTE Directive using a connection cable shorter than 3 metres. Do not use cables longer than 3 metres.Where you see this symbol on any of our electrical products/packaging in Europe, it means that at end of life the product/battery must be disposed of in accordance with any applicable laws or requirements for the separate disposal of electrical equipment/batteries. This symbol may be used on batteries in combination with additional chemical symbols. The chemical symbols for mercury (Hg) or lead (Pb) will appear if the battery contains more than 0.0005% mercury or more than 0.004% lead. Accordingly at end of life we will arrange for separate disposal of our loan equipment including without limitation development kits which remain at all times the property of Sony Computer Entertainment Europe. If you would like assistance with the disposal of any other electrical products which we have supplied to you for business use, we can arrange a take-back service on request. Please check https://www.tpr.scee.net for more information.This product contains a battery which is permanently built-in for safety, performance or data integrity reasons. The battery should not need to be replaced during the lifetime of the product and should only be removed by skilled service personnel. To ensure the correct waste treatment of the battery, please dispose of this product as electrical waste.The manufacturer of this product is Sony Computer Entertainment Inc., 1-7-1 Konan, Minato-ku, Tokyo, 108-0075, Japan. The Authorised Representative for EMC and product safety is Sony Deutschland GmbH, Hedelﬁ nger Strasse 61, 70327 Stuttgart, Germany.Distributed in Europe by Sony Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP, United Kingdom.For customers in the United KingdomA molded plug complying with BS1363 is ﬁ tted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5AMP fuse approved by ASTA or BSI to BS1362, (i.e., marked with or ) must be used. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.PrecautionsSafetyThis product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing ﬁ re, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines:• Observe all warnings, precautions and instructions.• Regularly inspect the AC power cord for damage.• Stop use, unplug the AC power cord from the electrical outlet and disconnect any other cables immediately if the device functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.Use and handling• Do not connect cables other than a USB cable while the AC power cord is plugged into the electrical outlet.• Do not touch the system or connected cables or accessories during an electrical storm.• Do not use the system or accessories near water.• Do not allow liquid, small particles or other foreign objects to get into the system or accessories.• Do not touch the connectors of the system or accessories.• Do not expose the system or accessories to dust, smoke or steam. Also, do not place the system in an area subject to excessive dust or cigarette smoke. Dust build-up or cigarette smoke residue on the internal components (such as the lens) may cause the system to malfunction.• Do not expose the system or accessories to high temperatures, high humidity or direct sunlight.• Do not place the system or accessories on surfaces that are unstable, tilted or subject to vibration.• Do not set the system other than in the vertical or horizontal position. When setting the system in the vertical position, use the vertical stand (sold separately) for this model of the system. Also, do not change the position while the system is turned on.• Be careful when carrying the system. If you do not have a good grip, the system may drop causing potential damage or injury.• Do not move or change the position of the system with a disc inserted. The vibration may result in scratching of the disc or the system.• Do not stand on or put objects on the system, and do not stack the system with other devices.• Do not place the system and connected accessories on the ﬂ oor or in a place where they may cause someone to trip or stumble.• Do not allow bodily contact with the system or air from the system vents for an extended period of time while in use. Extended contact under these conditions may cause low-temperature burns.• When connecting the system to a plasma or projection* TV, do not leave a still image on the TV screen for an extended period of time, as this may leave a faint image permanently on the screen. * Except LCD screen types• When using the motion sensor function of the wireless controller, be cautious of the following points. If the controller hits a person or object, this may cause accidental injury or damage.– Before using, check that there is plenty of space around you.– When using the controller, grip it firmly to make sure it cannot slip out of your hand.– If using a controller that is connected to the debugging station with a USB cable, make sure there is enough space for the cable so that the cable will not hit a person or object. Also, take care to avoid pulling the cable out of the debugging station while using the controller.VentsDo not block any vents. To maintain good ventilation, follow the guidelines below:• Place the system at least 10 cm (4 in) away from a wall surface.• Do not place on a carpet or rug with long ﬁ bers.• Do not place in a narrow or cramped space.• Do not cover with cloth.• Do not allow dust to build up on the vents.AC power cord use• Do not use a power cord other than the supplied AC power cord. Do not modify the cord.• Do not touch the plug of the AC power cord with wet hands.• Protect the AC power cord from being walked on or pinched particularly at plugs, expansion receptacles and the point where the cord exits from the system.• Do not place heavy items on the cord.• Do not place the AC power cord near heating equipment and do not expose the cord to heat.• Do not allow dust or foreign matter to build up around the AC IN connector. Before connecting or plugging in the AC power cord, check that there is no dust or foreign matter in or on the power plug or connecting end of the cord, the electrical outlet or the AC IN connector on the system rear. If the plug or connector becomes dirty, wipe off with a dry cloth before connecting.• Unplug the AC power cord from the electrical outlet before cleaning or moving the system, or when you do not intend to use the system for an extended period of time.• When disconnecting, grasp the power cord by the plug and pull straight out of the electrical outlet. Never pull by the cord and do not pull out at an angle.• Do not connect the AC power cord to a voltage transformer or inverter. Connecting the AC power cord to a voltage transformer for overseas travel or an inverter for use in an automobile may cause heat to build up in the system and may cause burns or a malfunction.Never disassemble or modify the system or accessoriesUse the debugging station and accessories according to the instructions in the product documentation. No authorization for the analysis or modiﬁ cation of the system, or the analysis and use of its circuit conﬁ gurations, is provided. Unauthorized modiﬁ cation of the system will void your warranty. There are no user serviceable components inside the debugging station. Additionally, there is a risk of exposure to laser radiation as well as to electrical shock.Network - wired connectionUse only an Ethernet cable compatible with 10BASE-T, 100BASE-TX or 1000BASE-T networks. Do not use a cord for a standard residential telephone line or cables of types other than those mentioned here. Using the wrong type of cord or cable can cause more electrical current than necessary to ﬂ ow through the LAN connector, which may lead to heat build-up, ﬁ re or malfunction.Moisture condensationIf the system or disc is brought directly from a cold location to a warm one, moisture may condense on the lens inside the system or on the disc. Should this occur, the system may not operate properly. In this case, remove the disc and turn off and unplug the system. Do not put the disc back in until the moisture evaporates (this may take several hours).Hard diskThis system is equipped with a hard disk (a recording device for storing software, data, etc.). Follow the instructions below to help prevent software or data loss or corruption or damage to the hard disk.• Do not place the system on an unstable surface or a surface that is subject to vibration.• Do not move the system while it is turned on.• Do not subject the system to physical shock.DECH-4000AA / DECH-S4000AA DECH-4000AB / DECH-S4000AB0-000-000-01(1)DECH-4000AA, DECH-S4000AA, DECH-4000AB, DECH-S4000ABDECH-4000AA, DECH-S4000AA, DECH-4000AB, DECH-S4000AB(DECH-4000AA, DECH-4000AB only)(DECH-4000AB and DECH-S4000AB only)