Sony Group CMTSBT20 Personal Audio System User Manual GTK XB7

Sony Corporation Personal Audio System GTK XB7

CMT-SBT20_User Manual_Rev 1

GTK-XB7.4-582-492-11(3)GTK-XB7.4-582-492-11(3)2GBWARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc.Do not expose the appliance to naked flame sources (for example, lighted candles).To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire.The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.Indoor use only.Notice for the customers in the USAOwner’s RecordThe model and serial numbers are located on the rear of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No.                                      Serial No.                                      Important Safety Instructions1)  Read these instructions.2)  Keep these instructions.3)  Heed all warnings.4)  Follow all instructions.5)  Do not use this apparatus near water.6)  Clean only with dry cloth.7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11)  Only use attachments/accessories specified by the manufacturer.12)  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13)  Unplug this apparatus during lightning storms or when unused for long periods of time.14)  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.37ESInformación adicionalM ˎMP3:  Capa de audio 3 ˎMPEG:  Grupo de expertos en imágenes animadas ˎMPEG1:  Grupo de expertos en imágenes animadas1N ˎNFC:  Comunicación de campo cercanoO ˎOS:  Sistema operativoP ˎPAIRING:  Emparejamiento ˎPARTY CHAIN:  Fiesta en cadena ˎPARTY CHAIN IN:  Entrada de fiesta en cadena ˎPARTY CHAIN OUT:  Salida de fiesta en cadenaR ˎR:  Derecho ˎRANDOM FLASH OFF:  Parpadeo aleatorio desactivado ˎRAVE:  Ensalzado ˎRMS:  Raíz Media Cuadrática ˎROOT:  RaízS ˎSBC:  Códec de subbanda ˎSMARTPHONE:  Teléfono inteligente ˎSPEAKER ADD:  Añadir altavoces ˎSTROBE:  EstroboscópicoT ˎTV:  TelevisiónU ˎUSB:  Puerto Serial UniversalV ˎVBR:  Velocidad de bits variableW ˎWAH:  Efecto “WAH” ˎWMA:  Windows Media Audio
3GBGTK-XB7.4-582-492-11(4)water.with rces ding e ype s g rd ety. into n for tlet.ng y at and he es  s m tip-d for ervice when ed in cord een o the een es en This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The following FCC statement applies only to the version of this model manufactured for sale in the USA. Other versions may not comply with FCC technical regulations.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).For customers in CanadaThis device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)  This device may not cause interference; and(2)  This device must accept any interference, including interference that may cause undesired operation of the device.This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE).GB

Navigation menu