Sony Group DCCFMT1 Vehicle FM Transmitter User Manual DCC FMT1
Sony Corporation Vehicle FM Transmitter DCC FMT1
User Manual
2-103-576-11(1) FM Transmitter for Car Radio Install the unit 1 Rotate the frequency select dial to select the same frequency that Specifications you set on the car radio. Transmission system multiplex stereo Transmission frequency 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 106.7MHz, 106.9MHz, 107.1MHz, 107.3MHz, 107.5MHz, 107.7MHz, 107.9MHz Electric strength less than 250uV/m (3m) Power voltage DC 12/24V (only for negative # grounded cars) Input ø3.5mm (stereo mini plug) Dimensions Unit:mm Notes on listening to CDs or MDs on car radio • If you connect this unit to the headphone jack on a portable audio device, cancel the bass boost function and the equalizer function. For details about these settings, refer to the operating instructions of the portable audio device. • If you connect this unit to the headphone jack on the portable audio device, set the volume control of the portable audio device as high as possible but not so high that the audio signal becomes distorted. Hint If you connect the unit to the headphone jack on the portable audio device and the sound is low even if the volume is turned up, change the INPUT LEVEL switch to LOW. If the sound is still low, turn up the volume on the car radio. Operating Instructions 38 40 120 52 40 The selected frequency appears in the frequency display window. The mark appears at the transition point between a low frequency band (88.1MHz~88.9MHz) and a high frequency band (106.7MHz~107.9MHz). See the mark as a borderline for high frequency and low frequency. 51 Signal cable length Approx.1.2m (3 ft. 11 1/4 in.) Antenna cable length Approx.3m (9 ft. 10 1/8 in.) Mass Approx. 80g (3 oz.) Supplied accessories Operating Instructions (1) Warranty Card (1) ©2004 Sony Corporation How to use the INPUT LEVEL switch HIGH: Use HIGH level for general use. LOW : If you connect to the headphone jack on the portable audio device and the sound level is still low even if the volume is turned up, use LOW level. Fuse replacement Printed in China WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. to tighten Cigarette lighter plug End of the plug to remove Pull this unit out of the cigarette lighter socket. Detach the end of the plug by turning it counter-clockwise. Take out the fuse. Check the fuse. Portable audio device If the fuse is blown, go to Step 5. If no fuse is blown, go to Step 6. Install a new fuse. Use a fuse of the correct amperage, as stated on the fuse compartment of this unit (1A, 125V, 20mm). Insert the fuse. Reattach the end of the plug by turning it clockwise firmly. Notes • When replacing the fuse, be sure to use the correct amperage, as stated on the fuse compartment of this unit. (1A, 125V, 20mm) • Use of a higher amperage fuse may cause serious damage or fire. • Do not use a piece of wire instead of a fuse. • If the replaced fuse blows again, consult your dealer. Identifying the parts POWER lamp INPUT LEVEL switch HIGH Easy operation with the frequency select dial Select from 12 FM radio frequencies (channels) to transmit. “Walkman” and “WALKMAN” are registered trademarks of Sony Corporation. There is no sound from the portable audio device to the car radio. ❒ This unit is not fully plugged into the cigarette lighter socket. c Insert this unit correctly and securely. ❒ This unit is not fully connected to the portable audio device. c Connect this unit correctly and securely. ❒ The transmisson frequency of the unit and the FM car radio do not coincide. c Set both the unit and the FM car radio to the same frequency. ❒ There is no sound from the connecting portable audio device. c Start playback on the portable audio device. c If you connect this unit to the headphone jack on the portable audio device, set the volume control of the portable audio device as high as possible but not so high that the audio signal becomes distorted. ❒ The volume of the portable audio device is set too low. c If you connect this unit to the headphone jack on the portable audio device, set the volume control of the portable audio device as high as possible but not so high that the audio signal becomes distorted. If the sound is still low, set the INPUT LEVEL switch to LOW. If the sound is still low even if the INPUT LEVEL switch is set to LOW, turn the volume up on the car radio. Start playback on the portable audio device. Place the antenna cable inside the car to improve the reception. ❒ The reception of the FM car radio is not good. c Place the antenna cable for the unit inside the car. Position the antenna close to the car antenna. This may help to improve the reception. Notes • Place the antenna cable close to the car antenna if the reception is poor. This may help to improve the reception. • Place the antenna cable in a manner that does not disturb your driving and is out of the reach of children. • Route the cables so that they do not interfere with your driving. • Distortion or jamming may be due to external interference, depending on the area. If reception is affected, try selecting another better frequency. • For details about the car radio antenna, refer to the car operating instructions. • Place this unit in a manner that will not hinder the airbag function in an emergency. ❒ The FM car radio receives a broadcast signal. c Select an empty frequency (a non-broadcast frequency, indicated by a static hissing sound).❒ The selected frequency is occupied or the signal is jammed. c Select another open or frequency which is less influenced by jamming (a non-broadcast frequency, indicated by a static hissing sound). The sound is interrupted ❒ The signal is jammed locally. c Select another frequency which is less influenced by jamming (a nonbroadcast frequency, indicated by a static hissing sound). The Power lamp does not light. ❒ This unit is not completely plugged into the cigarette lighter socket. c Insert this unit correctly and securely. ❒ The ignition key is not ON. Depending on the car type, the ignition key must be turned to ON for electric current to flow to the cigarette lighter socket. c Turn on the ignition key. Frequency display window ❒ The fuse is blown. c Replace the fuse. Antenna cable Antenna cable Stereo mini plug ❒ The bass boost function on the portable audio device is on. c Cancel the bass boost function. ❒ The frequency of the unit does not coincide with the FM car radio. c Set the unit and the FM car radio to the same frequency. LOW Frequency select dial ❒ The input signal is too high. c If you connect to the headphone jack on the portable audio device, turn the volume down on the portable audio device until the sound is not distorted. c If you connect to the LINE OUT jack on the portable audio device, set the INPUT LEVEL switch to HIGH. Noise is generated Precautions • Do not attempt to connect this unit, or to operate this unit, a portable audio device, or a car radio while driving or waiting at a traffic signal. Park in a safe place first. • Unplug this unit from the cigarette lighter socket whenever the engine of the car is not running. Depending on the car type, even if the ignition key is off, the power supply may not turn off automatically. In this case, this may cause unnecessary car battery consumption. • When not in use, unplug this unit from the cigarette lighter socket and store in a safe place where it will not interfere with your driving or become entangled in parts of the car interior (seat, door, etc.). • Be sure to fully secure the portable audio device connected to the unit to avoid moving when braking. • Route the antenna cable or signal cable properly so that they will not interfere with your driving or become entangled in parts of the car interior (seat, door, etc.). • Never yank or pull the antenna cable or signal cable. This may cause malfunctions or wire breaks. • Do not drop or hit the unit. This may cause malfunctions. Should any problem persist after you have made the following checks, consult your nearest Sony dealer. The sound is distorted Stable clear sound • Using the flexible transmitting antenna, it is possible to transmit a stable FM radio wave in any kind of car. • Digital frequency selection, rather than analog, assures a more stable and clear transmission. No dry batteries This unit connects to a 12V or 24V DC car battery (cigarette lighter socket), available in many types of cars and trucks. Troubleshooting The volume is low 3 to a cigarette lighter socket Features With this unit, you can enjoy listening to audio played on portable audio devices through a car FM radio. Music from portable devices such as a MD, CD, or Network Walkman, etc., is transmitted to the car’s FM radio via FM radio waves. Insert this unit into the cigarette lighter socket. If this unit does not work correctly, check the fuse in the cigarette lighter plug. If the fuse is blown, replace it. Fuse For customers who purchased this product in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services, and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. Connect the stereo mini plug to the LINE OUT jack on the portable audio device. If there is no LINE OUT jack on the portable audio device, connect it to the headphone jack. Design and specifications subject to change without notice. DCC-FMT1 Notes • Do not attempt to connect this unit, or to operate this unit, a portable audio device, or a car radio while driving or waiting at a traffic signal. Park in a safe place first. • Plug securely into the cigarette lighter socket. Connections Set the car radio 1 Tune in to an FM frequency in your car radio. 2 Select a frequency that does not receive broadcasts from the list below. 88.1MHz, 88.3MHz, 88.5MHz, 88.7MHz, 88.9MHz, 106.7MHz, 106.9MHz, 107.1MHz, 107.3MHz, 107.5MHz, 107.7MHz, 107.9MHz The reception conditions may change as your location changes. If the selected frequency becomes occupied by a broadcast signal, select another open frequency. Notes • For details about car radio settings, refer to the car radio-operating instructions. • Turn the car radio volume down before setting the car radio. Antenna cable These are just sample cases. Adjust the antenna for best reception, depending on your car.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2004:06:04 02:13:23Z Modify Date : 2004:06:07 17:02:46+09:00 Page Count : 1 Creation Date : 2004:06:04 02:13:23Z Mod Date : 2004:06:07 17:02:46+09:00 Producer : Acrobat Distiller 5.0.5 for Macintosh Author : Sony Corporation Metadata Date : 2004:06:07 17:02:46+09:00 Creator : Sony Corporation Title : DCC-FMT1EXIF Metadata provided by EXIF.tools