Sony Group DCRIP220 Digital Video Camera Recorder User Manual Manual 2
Sony Corporation Digital Video Camera Recorder Manual 2
Contents
Manual 2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 260409 |
| Application ID | 19k/Apfm1dzKk+Ir6TieYA== |
| Document Description | Manual 2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 125.5kB (1568812 bits) |
| Date Submitted | 2002-08-01 00:00:00 |
| Date Available | 2002-08-01 00:00:00 |
| Creation Date | 2002-07-05 14:28:34 |
| Producing Software | Acrobat 5.0 Scan Plug-in for Windows |
| Document Lastmod | 2002-07-24 12:58:51 |
| Document Title | Manual 2 |
| Document Creator | Acrobat 5.0 Scan Plug-in for Windows |
Recording still images on a “Memory Stink" in CAMERA mode
__.__._______—.
if you leave your camcorder for five or more minutes after setting the POWER
switch to OFF (CHE)
Your camgorder returns to the defaultseliing (am).
You (annot shoot images with the flash during lhe following operations:
— Wide mode
— Fade:
- Digital effect
— Picture effect
— Super Nignsmn
— Calm Slow Shutter
— END SEARCH
~ MEMORY MIX
- Recording
The flash does not fire even if you select auto {no indicator) and 0 (mm: red-eye
redmion) during the following operations:
- Exposure
- NightShoi
—Spotlight of PROGRAM AE
—Sunsel s: moon of PROGRAM AE
-Lanosape of PROGRAM AE
—Flexible 5pm Meter
_| i olusnswnnNTsesalcau-ow 5“ Mule-mm
DCR-IPZIO/IPZZO 3-076-897-11(1).US
51
I T
sucluuado Emmi—nan pnuellpv i
,:
You can record su'u images with the sell-timer. You can also use (1m Remote
Commander far this operation
Before operation
Insert a "Memory Stick" into your Murder.
(1) Set the POWER switch to CAMERA.
(1)ng EN—— 177 d; splay PAdrE1
(3) Press SELl-TIMER.
The Q) (self-timer) indicator appears on the LCD screen.
(4) Press PHOTO deeper. ‘
The self-timer starts cumming down from 10 with a beep. In the lask two k j
seconds of the countdown, the beep gets Easier, than the recording star's
automatically. ‘ .
fTo cancel self-timer recording
Press SELFHMER so that the Q) (self-timer) indicator disappeals harm the LCD screen
while your camcorder is in the standby moder You cannot cancel the sell-timer
~ recording using the Remote Cnmmander.
Nate
The self-timer recording is automaually mceled when:
— Self-Hmer recording is fin'shed.
—The POWER switch is set to OFF (CHG) or VCR.
During recording m the tape E
You cannot use selmimer recording.
52
—‘| ‘ ouusovmwwasflomnsa) sz az.4.z4,4:mFM | [—
DCR-IPZIU/LPHD 3~D76~897~11(1)AUS
Adjusting the white balance manually
You ran manually adjust and set the white balance. This adjustment milks white
subij look White and allows more natural color balance. Normally white balance is
automatically adjusted,
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press FN to display PACEll > J
(3) Press MENU, then select WHT EAL in m in the menu settings to select a
desired white balance mode (p. c 0).
, /
HOLD ecm'di asingle-coloredsubjectorbackground
umoon):
- ecurding a sunset/sunrise, just after sunset, justbeiore sunrise, neon signs. or
fixeworls
-Underamfl axescentlamp
my l) ”7
M‘
-n gluing conditions change quickly
-ln Ion bright places such as pholchaphy sludins
- Unde: sodium lamps or mercury lamps
sunnelaao Eulpjoziau pajuenpv !
AUTO
H a L D ,_
lOUTDooR l ‘
To return to PM I N ”WK ; 1
Press EXIT. _ H
To return to the automatic white balance mode
Set WHT BAL to AUTO in the menu settings. H
—| | U|U505ADH-NT.95591MB-GSA) sa 02.425‘\|:fiAM | l—
DCR-lPZlO/lI’ZZIJ 3-076»897-11(1).US
Adjusting the white balance manually
If rne pierure is being taken in a male lit by TV llgmlng
We recommend that you record in the NDOO ,
when you record underfluorescent llghr'lng
Select AUTO or HOLD, ,
Your camcorder may not adjust the white balance canedly in the WMe.
In the AUTO made ~ ‘
palm your oammlder at me white subject for abuut 10 seconds after selling the POWER
switch to CAMERA to gel better adjustment when:
_ You lake am the battery for replacement.
- You bring your camcorder frum indoers to mnduors noldlng the exposure, or vice
Versa.
In the HOLD mode
Set the white balance to AUTO and reset to HOLD after a few seconds when:
— You rhange the PROGRAM AE made,
— Yau bring your camcorder from indoors to outdoors, or vice velsa.
54
_l ’ alususABn-mosssmuul) 54 02.A2¢,A:DGPM ‘ ,_
DCR-H’Zlfl/II’ZZO 3-D76»897-11(1).US
Using the wide mode
You can record a 15:9 wide picture to watch an the 16:9 wide~screen TV (16:9W'IDE).
Black bands appear on the LCD screen during recording in 1&3me mode [a], The
picture during playing back on a normal w [b] or a widtscreen TV [q are comprssed
in [he widthwise direction. If yuusat the screen made of the wide-screen TV to the full
made, you can watch pictures of normal imaga [d].
[b] @ ,
l ] [d]
‘ IQ?! —>
(1) Set the POWER switch in CAB/HERA.
(1) Press FN «a display man.
(a) Press MENU, men set 16:9W'1DE in a to ON in the menu settings (p. - -).
—>
To return to FN EXPAN DED F
Press Em.
To cancel the wide mode
Se!16:9WTDE to OFF in the menu setting;
55
—‘| ’ muscswwmwssmwow 55 02,424.41mPM
DCR-Imlfl/H’ZZG 3A076-897-11(1).US
..-,.....,U Sugpjonu par-mm, I
56
Using the wide mode
__—-_——._—______
In the wide mode, you cannot select the following functions:
—Recording still images
-OLD MOVIE
—BDUNCE
During recording
You camel select or cancel the wide mode. When you cancel the wide mode, set your
camcorder to the recording standby mode and then set 15.9me to OFF in the menu
settings
Connection for a TV
Pictures recorded in the 16:9WIDE mode auinmalimlly appear on the TV screen a! hm
size when:
—Ycu connect your camcorder to a TV that is ccmpatlble with the video ID (lD-l/ID-Z)
system.
- You connect ynur mmcorder to the S Video jack on the TV,
nu system
The 113-1 system sends aspect ratio (screen horizontal/vertical mlio) information (15:9,
4:3, or lather box) with video signals
lD-Z system
The 104 system sends a copyright preteclion signal with ID-l signals insenecl between
video signals when you connect your camcorder to other equipmenl using an A/V
connecting cable.
7 [ oiusasAoR-momlnns-wi ss DZ4.24A.08PM
DCerP210/IP220 3-076-897-1 1(1)rUS
l I—
Using the fader function
Ynu an fade in or cut I0 glve your recording a prufssianal appearance.
[a]
‘ .FADER
(fader)
m n
MéFADER g
(mosaic) S 1
la ,
5.’ r
El.
so unce'l n u’:
5.
[b]
monomn E
When fading in, are picture gmdually dunges from black-and-whiie m culor.
When fading out, the picture gradually changes inarn color to black-and-whlle.
“1 You can use the BOUNCE function when D ZOOM ls set to on“ m the menu settings.
a Fade m only
_I I ulusnfimn-Nussalluwul 57 DZAZAJ‘DGPM I F
DCRrIPflO/IPZZO 3-076-897-11(1).US
58
Using the fader function
——.——.______.______
(1) When fading in [a]
In the recording standby mnde‘ press FADER until the desired fader indicator
Flashes.
When fading out [b]
In the recording mode, press FADER until the desired fadar indicator flashes.
The indicator dranges as follows:
I: FADER -—> M. FADER —’ BOUNCE —> MONOTON'E —> (no indicator} 1
The last selected fade: is indicated first of all.
(2) Press START/ STOP. The fader indicator stops flashing, then lights up.
Aftar the fade iri/out is carried out, the [Baler indicator goes off and your
camcorder automatically returns to the normal made,
START] STOP
To cancel the fader function
Before pressing START/STOP, press FADER until the indicator disappears.
Nata
Yuu cannot use the following functions while using the fade: function. Also, you cannot
use the finder function while using the following functions:
- Digital eiieci
- Super Nightshot
— Calor Slow Shutter
~ Recording still imagas ‘
While using the BOUNCE function. you cannct use the following functions:
—Exposure >
—Fle>BQ7<11(1).US
Using special effects - Digital effect
You eeri add special effects to recorded pictures using rhe various digiiei functions. The
sound rs recorded hermeiiy.
STILL
You can record a 51111 irrmge so that ii is superimposed rm 3 muving picture. ,
FLASH (FLASH MOTION)
You can record still urieges successively a! regular iruerveis
LUM1.(I.UM1NANCE KEY)
You an swap the brighter area m a siiu image witki a moving pierure
TRAIL
You can record a picture so that an incidental image like a trail is left.
SLOW SHTR (SLOW SHUTTER)
You ceri slow down he shuner speed.'1‘he slow shuher mode 1s good for recording
dark pirrures more brightly
OLD MOVIE
You can add an old movie type atmosphere to pictum. Your camcorder auiomaiically
seis the wide mode to ON, rhe picture effect in SEPIA, and the appropriate shutter
speed.
51111 image Moving picture
STILL
Still image
LUMI.
62
_I [ D'lUSDSADF-NT Wfififlflflfidl 62 02.416, 4 Bil PM
DCRrII’ZlCI/H’ZZD 30767597711(1).U5
Using special effects — Digital effect
_———__——_—__—___
(1) Sei me POWER switch to CAMERA.
(2) Press FN and 50 kc PAGEZ.
(3) Press DIG EFFI', The DIG EFFT screen appears.
(4) Press a desired digital effECt mode, In the STILL and LUMI. mOdES, the Still
image is siored in memory.
(5) Press -/+ to adjust the effect}
irei-ns to ed|usr
gnu. The file of are siiu image you want to superimpose on me moving m
picture >
\ FLASH The inierval of frame by Emma playback g
LUMI. The color scheme of the area in the still image which is to be swapped a
wiui a moving picture i
TRAIL The vanishing time cf the inririeniei image 5
sLow 5m snurier speed. The Larger the shutter speed number, me slower iris g
shutter speed. is
OLD MOVIE Nu adjusuneni necessary 3
(6) Press z OK. The display reiurns to PAGE. 5
mun? |
The bar appears when setting following
digiiai effect modes: FULL, FLASHi 7
LUML, TRAIL --
To return tn FN ' ' ‘
A-Prer S’rep 6, press EXIT,
To cancel the digital effect
Press 3: OFF, The display returns to PAGEZ.
j | niusaunn-mnussimum) as 014.254:me ] r“
DCerl’ZlO/IPZZO $07&897r11(l)_US
Using special effects - Digital effect
——————_—_—
Notes
- The following funclions do not work during digital éflecr.
— Peder
~ Super nghlsml
- Color Slaw Shutter
—Recurding sfill imagfi .
' The PROGRAM AE function dues not work in the slow shutter mode.
' The following functions do not work in the OLD MOVIE mode:
— Wide mode
- Picture effect
— PROGRAM AB
When yuu set the POWER switch to OFF (CHG)
The digital effect will be aulcmafimlly wheeled.
When recording in the slow shutter made
, ~ Auto focus may ml be effective. Focus manually using a tripod
Shutter speed
Shutter speed number Shutter speed
SLOW SHTR 1 1/30
SLOW SHTR 2 1/15 ,
SLOW SHTR 3 1/8
SLOW SHTR 4 1/4
64
T I olusnwn-Nrnusnmmnm 54 uz.4.z4.4:oaPM I ,_
DCRAEPZID/IPZZO 370767897—11(l).U5
JI a. , IL
Using the PROGRAM AE
You can select PROGRAM AE (Auto Exposure) mode to suit your specthc shooting
requirements.
a SPOTLIGHT (Spotlighti t
This mode prevents people's feces, for example, from appealing excessively white
when shooting subjects lit by strong light in the theater,
is ponmmr (Soft portrait)
This mode brings out the subject while creating a suit background for subjects such as
people or flowers
‘X SPORTS (Sports lesson)
This mode mimmizes shake on last-moving subjects surh as in tennis or golf.
7" BEACHES” (Beach St ski)
This made prevents people's faces from appearing dark in strung light or reflected light
such as at a beach in midsummer or on a ski slope.
5 SUNSETMOON (Sunset 81 moon) t
This mode allows you to maintain atmosphere when you are recording sunsets, general
night views, fireworks displays and neon signs.
sunneieuo Suipmnu pinumpv !
m LANDSCAPE (Landscape)
This mode is [or when you are record distant subjecls such as mountains. Also it “
prevents your camcorder fmm focusing on glass or metal mesh in windmws when you
are recording a subject behind glass er a screen
65
j r BIUSMADH—Nl'rpéiwoi-WE) as M.A.21.4103FM r l»
DCRsIPZlD/IPZZD 3076-8974 10) US
Using the PROGRAM AE
(1) Set the POWER Switch to CAMERA Dr MEMORY
(2) Press FN to display PAGEL
(3) Press MENU, then select PROGRAM AE in m in the menu settings [0 select a
desired mode (p. - -).
SHARP/V555
III CC]
To return to PM
Aim, 91173, Pms EXIT.
To turn the PROGRAM AE off
Select AUTO in PROGRAM AB in the menu settings.
Notes
- Because your mmwzder is set to focus only on subjects in the middle to far dismnce,
you cannot take closeups in the follcwing modes:
po lg
Sports lesson 53 <—
eech a 516
- Your camcorder is set to focus only on d‘skxm subjem in the fallowing mades:
unset s rho. .
‘3 <—
- the to nwmg ncticms do not work in PROGRAM AE:
—Cular Slow Shutter
— Slow shutter
— OLD MOVIE
~ BOUNCE
' The PROGRAM AE does not work in the following uses (The lnditator flashes):
- NightShot
- NightFramlng
—Ta record images on a "Memory Stick“ using the MEMORY MIX.
- When you set the POWER switch to MEMORY, sports lesson dues not work. (The
indicator flashes.)
(66
OIUSDGADR-NT panned-072) as 02.4 zt. am PM | l—
‘ DCRALPZID/EFZZD 370767397711(1).US
Using the PROGRAM AE
————————_—______
While WHT EAL is set to AUTO in the menu ssrtings
The white balance is adiusked even if the PROGRAM A17. is selectech
You can adjust the {allowing functions while using the PROGRAM AE:
-B(posure
— Flexible 5pm Meier
If you record under a discharge tube such as a fluorescent lamp, sodium lamp ar
mercury lamp ,
Flickering or changes in color may occur in the folluwing mudes. If this happens, mm
the PROGRAM AE off:
- Soft ponrail
—Sports lesson
innuendo fiungmay pnmpv !
j ' niusolADH-Wpfiflflsfiflfl) 57 mo24.4,oam I r—
DCRfl-‘ZIO/IPZZD 3-076-897411(1).US
Adjusting the exposure manually I
You can adjust and set the exposure Normally the exposure is automatically adjusled.
Ad'usl the ex aeure manually ln the following uses:
- ' 2 0 Mlle
—Te shout a bright subject against a backgrnund To make a 7L,” ex? 5
urn record dark pictures (eg. night scales) faithfully _ 460115 Tmfn'l’
(1) Set the POWER switch to CAMERA or MEMORYr
(2) Press IN to display PAGEL
(3) Press EXPOSURE, The EXPOSURE screen appears.
(a) Press MANUAL. . .
(5) Adjust the exposure using —/+l 1
— :TD dim e l
+ : To brighten A
(5) Press 2» OK. The display returns to PAGEl. ' ‘
ll
To return to FN
Press Exrr utter step 6.
To return to the automatic exposure mode
Press n AUTO In step s.'rhedisplay returns to PAGE].
[41 .
Note
When you adjust the exposure manually, the following functions do no! work: '
7 Color Slow Shutter i
—Ba11(1).U5
! T
JI ll:
Focusing manually
—————_—__
Ta fecus'precisely
it is easier {0 focus an the subject if you adjust the min to shout at the "w" (wide
angle) position sitter focusing at the "r~ (telephoto) position
When you sheet close m the subject
Focus at the end 01 the "w" (wide-angle) pnsiuoni
. . i
me changes as fullnws: j
if when tececcling a distant Subim j
; when the subject is led close to focus on j
Fecal distarKe infurmation is dlsplayed for about threg seconds on the LCD screen
in the following cases: '
_ When switching the focus adjustment mode ftom autofecus to manual
-When turning the focus ring
Fecal distance infnrmation
.This information aids focusing if it is net easy to focus on the subject, for example,
when recording in the dark. Use this inlocmetien as a rough guide us get a slurp ,
focus. -
, - You cannot get correct information it ynu have attached a convelsion lens (optional)
to your camcetclet. i
snoumado fiujpmieu pamellpv i
j | uiusuwn-Nusswsscizl vi MAZAADJPM | I—
DCR-IPZlO/IPZZD 370767897711(1).US
Using the spot focus mode - Spot Focus
You can take a picture with are appropriate focus automatically for just the point you
wan: lo focus on and with its focus fixed.
(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press FN to display PAGEI.
(3) Press SPOT FOCUS. The SPOT FOCUS screen appears,
(4) Press the desired area in the frame on the LCD screen.
The SPOT FOCUS indicator flashes on the LCD screen. When the focus of the
poim you selecred is adjusted, the a; indicatar appea‘r's.
(5) Press 3 OK to return to PAGEl,
sml
um
ma.
ma
SELF
To return to FN TIMER
Press m after siep 5.
To return to the autoiocus mode
Press 2 AUTO in scep 4. The display mum to PAC-El.
Name
When adjusting Spot Focus, the following modcs do not woric
- Pader '
— PROGRAM’AE
- Exposure
- Bacldigm
Focal dlsrance information
It is rim displayed on the screen.
—’ ’ omsnsmfimmmasma 72 024.213:ch m
DCR—MIO/IPZZO 3076~897~11(1).US
- Advanced Playback Operations -—
Playing back a tape with picture effects
During playback, you can process a scene using the picture effect lunctinns: NEG ART
SEPIA. saw and SOLARIZE.
(1) Set the POWER switch to VCR, In the playback or playback pause mode. press
FN to display PAGEI.
(2) Press MENU, then select P EFFECT in m in me menu settings to select a
desired picture effect made (p. - -)r
See page - - For details of each picture effect function
”Hazel?
To return to FN
Press Exrrr
To cancel the picture effect function
Set P EFFECT m OFF in the menu settings.
Notes
- You carim't process externally inputscenes using the picture effect function
- You cannot record image on A tape on your camcorder while you are prunessing the
image using the picture effect functien. However, you can retard images an a
"Memory Stick" (p . -, - v), ur on a VCR using your caxnéorder as a puyerr
Pictures pruressed by the picture effect function
Pictures processed by the picture effect tunction are not output through the i.LlNK
(mathv Interface).
when you set the POWER switch to on: (CHG) or stop playing back
The picture effect function is automatically canceled.
T | musme-Nrnssimcaz) 73 52.4 mm: PM
DCR~IPZIUlIP220 3-076-897-110),U5
l (—
74
Playing back a tape with digital effects
During playback, you can process a scene using the digital effect‘funcn‘onsl SIILL.
FLASH, LUMl. and TRAIL.
(1) Set the POWER switch to VCR. In the playback or playback pause mode, press
FN and go to PAGEZ.
(2) Press ch EFFI'. The DIG em screen appears.
(3) Select a desired digital effect mode. In the STILL or LU'NH. mode, the picture
that you select the mode is stored in memory as a still image
(4) Press —/ + to adjust the effect. See page G r for details.
(5) Press 2- OK. The display returns to PAGEZ.
To return to PM
Press 5x11 after step 5.
To cancel the digital effect function
Press 2 OFF in step 2. The display returns to PAGEI.
Notes
- You came! process externally input soenes using the digital effect function,
- You cannot record images onmape on your camcorder while you are processing the
image using the cligilsl effect funclion However, you can record imags on a
”Memory Stick“ (p. - - ~ -), or on a VCR using your camcoxder as a player.
Pictures processed by the digital effect function
Picturs processed by the digital effect function are not output through the i.LlNl<
(MICROMV Interface).
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function is automatically canceled.
j| niUSn7ADP~NT.psSlD73—flflza 74 aza.2¢.4:ozFM
DCR-IPQIOIIPZZIJ 3»076-897-11(1).U5
Enlarging images recorded on tapes
— Tape PB ZOOM
Du can enlarge 1; ayba -. ecnrded an tapes. asides the eperatien
described here, yeur camcorder can enlarge still lmages recorded on a ”Memory Stick"
(P» ")v
(1) Set the POWER switch to VCR. In the playback or playback pause mode, press
FN end go to PAGEZ.
(2) Press PB zoom, The PB ZOOM screen appears,
(3) Press rhe area you want to enlarge in the frame on the PB ZOOM screen.
The area you pressed moves to the center of the LCD screen, and the playback
image is enlarged to twice the size. lf ynu press rhe other area again, the area
moves to the center of the LCD screen.
(4) Adjust the zoom ratio by the zoom lever.
You can enlarge the image from Ll times up to five times its size.
"W” side: Decrease the worn ratio.
"1'" side: Increase the zoom ratio.
suanuado mm“ paaueaw i
To cancel the PB ZOOM function
Press 2 END. ‘ \
musunnP-Nwaswkul 75 um at. to: PM ‘ r”
DCR~D’210/H"ZZO 3e076e897711(1).US
7G
Enlarging images recorded on tapes - Tape PB ZOOM
——_.__._
Notes
- You cannot process externally input seenee using the PB ZOOM Punainn with your
camcorder.
- You cannot record image on a tape on your camcorder while you are processing the
image using the tape PB ZOOM function. However, you eon record images on a
“Memory Stick” (p. - -), or on a VCR using your cameoreler as a player.
- You eennot reoord moving pictures on a "Memory Stick" on your camcorder while
you are processing the picture using thetape PB zoom function
The re zoom function is automatically canceled when you operate the following
functions:
- Set the POWER switch to OFF (CE—1G).
—Slcp playing back.
—lnsen a "Memory Stick"
' images in the ma zoom
images in the PB zoom mode are not output through the LLINK (MICROMV
interface) and l! (USB) jack. -
[n the pa zoom mode
If you press DISPLAY/TOUCH PANEL, the frame on the pa zoom screen disappears.
You cannot move the part you pressed to the center of the LCD screen.
Edge of the enlarged image
The ectge or the enlarged image cannot be displayed at the eenter or the LCD screen.
When FOCUS is set to ZOOM
You can change the zoom ratio using the zoom ring.
7 | niysuuDP-Nr osmium» 75 024.24.A:05 m
DCR-lPZlD/IPZZD 3-D76-897-11(1).US
I T
_H ' !|_
Searching for a scene
— MULTI-PICTURE SEARCH
Usin the mulH--icmre search function, you ran display thumbnails at all the
-egmmngscenes o 7' e - z . recorded on the tape animhe index screen. The
recording date and tit e o eac image or scene ate also indicated. The thumbnails
' destn'hed in this section are the still imag- of all the beginning scenes of each recbrded
moving pictures and still images to help you search for the desired scene easily. When
you select the thumbnail you want to play back, ynur camcorder starts searching tor the
image or scene and plays it back automatically.
You can also control this function using the Remote Commander.
(1) Set the POWER switch to VCR,
(2) Press FN to display PAGEl. w
(a) Prss mum SCH. The MUL’I'I SCH screen appears. m
(4) Press <-/—> to select the direction to scan. Your camcorder starts scanning in 3,
the selected direction When you select -P, the thumbnails are displayed from 3
T1
at
the upper-left window, and when you select 4-, they are displayed from the
lower-right window. When scanning is completed, it stops automatically. The
upper-left window turns black and the thumbnails will be displayed on the
index screen.
MULTI SRCH
flue/é
uuul sun
SELECT
DIRECTION
Elam
[a] The picture being fast-forwarded or rewound
[bl The blue portion indicates the range of the scan currently being made to
display thumbnails
Ll
77
T I U‘USIWADVLNTaESUHS-fln) 17 02.025J1‘38AM | l“
DCR-lPZlO/H’ZZO 3-D76~BD7-1 1(1).U5
Searching r a scené 7- MULTl-PICTURE SEARCH
(5 Select the thumbnail ycu want to play back, then pass EXEC, You can a so
play back the thumbnail by double-tap m it. Your camcur er starts searc '
r file image or scene an p ays 1( ac): automatically. The blue portion of the
bar indicates the scanning range and the white portion of the bar indicates the
recorded port-ion .
When you want an change the thumbnail
Press 3 RET, a you want to playback again, t en
55 Z’
wue/a/EXECUTE humans , 7, . 7
These buttons function the same as the comm] button on
your camcorder.
[<1 [d] [e]
[c] The title/shale (The title turns to the dale indication after five seconds.)
[d] The actual point you are trying to search for (yellow A mark)
[e] The present point on the tape (yellow bar)
78
m usmmpmmsmmmy 13 he; 21‘ ms PM
DCR-lPZlO/IPZZO 3-076-897-1H1LU5
. “MD.
Searching for a scene — MULTI-PICTURE SEARCH
To returnio the MULTI SCH screen from playback
Free 2 as / pr Pym EXECUTE on file Rem/Ire commander
To stop searching
Press SOP on lhe Remote Commander.
To end the multi—picture search function ; l
Press z END. The display mums m PAGElil >
To end the mum-picture search function from the playback . 1
screen ' i
PressExrr.
When controlling your camcorder with the Remote
Commander
You can use the MULTI SRCH and T/Jv/e/->/EXECUTE buttons.
suopexado apatite“ paiuenw E
Mum SRCH ‘r/G‘lt-lé/EXECUTE buttons
Notes
-Tnumbnails may not be displayed depending on the condition of the lape. This is not
a malfunction.
- Noise may appear on the thumbnails. However, this has no effect on the recorded
images.
If the tape has a blank portion in the beginning of the tape or between recnrderi
poniens -
The mum-picture scum function may not work correctly.
‘l'he number of thumbnails stored in one cassette
About 400 thumbnails can be stored.
79
T | musnunP-thnslmwse) 7s ne.¢.24.moam ‘ ]_
DCR-LPZIO/IPZZO 3-076-897-11(1).US
Searching for a scene - MULTI-PICTURE SEARCH
The nnmher of thumbnailsthar ran he dlsplayed for in one scanning
A maximum of 11 thumbnails ran heoisplayeo ter in one scanmng.
WHen you press mum sacn on the Remote Commander
The MULTI SCH screen aDDEars.
rig Searchlng '
e 0 or tunetrons of your camcorder do not work.
The thumbnail images displayed on the Mum SCH screen
You cannot modify these thumbnail imags.
When you us! the mukl-plflure search funnlon wlth the digital effect activated ‘i
The digital affect will be canceled. , 1
Some ofthe 11 thumbnails may not be displayed in the following cases:
- These are fewer than 11 recorded images and scenes on the searched portion of tie
tape. i
. When scanning a tape recorded ovez previous recording. <— 1 ‘g l
- When you have erased all the Micro Cassette Memory of the tape lp. . -l.
To select the thumbnail with the Remote Commander
i Press +/’lf/(-/-) on the Remote Cummander.
When you press DATE or P05
You an switch to the title/date display or the tape bar display that shows the present
paint on the tape,
While your camcorder is searching for the image or scene, the tape hat deploy appears
even if you select Title/Date.
when you select 4- or -> during scanning
The next 11 thumbnarls will be scanned. e
Even if the first thumbnail is not displayed before the scanning ls completed
You om ploy back the imge or scene.
80
T | 01U507ADP-NT.965(073~O€2) so $124,443 w ‘ I'—
DCR-IP210/1I’220 3-D76v897-11(1).U5
JI IL
Searching the boundaries of recorded
tape by title — TITLE SEARCH
You fin search for the bcundsries of a recorded tape by seiseting the title. Use the
Retnnte Cmnmander for this npetation,
(1) Set the POWER switch to VCRi .
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the TITLE
SEARCH indicator appears,
The indicator changes as follows:
TlTLE SEARCH —- DATE SEARCH
i- (no indicator) e—l ,
(3) Press 1‘ D! it on the Remote Comrmnder to select the title for playback, then
press EXECUTE on the Remule Commander.
Searching the boundaries starts, and playback automatically starts at the scene
with the title selected. Even if you do not press EXECUTE, searching the
boundaries starts automatically in two seconds after you select the title.
meme
SEW" i Eiii'imm
"1°95 . new
, “item
1 mm
‘ suallmado qanfiegd pane/w !
"7:1 mm
s mm m "All
. mm
| ecu-aw
melee:
[3] Actual point you are uying to search for
[b] Present point on the tape
To stop searching
Press STOP on the Remake Corfu-nander,
If a tape has a blank portion in the beginning of the tape or between recorded
sections -
The titie search function may not work tonettiy.
Te superlmpnse a title
See page - 0.
—| | musmAnP-Nrnmsmnnaz) Bl oz.4.eA,«uaPM ‘ I I'—
DCR-umo/mzu 3-075-397-1u1tus
JJJ
Use dine KemoTe Commander for Ho's ofemfion.
Searching a recording by date
— DATE SEARCH
Your camcorder automatically searches tor the point where the recording date changes
andstaria Ia iaarktrarnthat ointb selectin therecurdin date oateseareh.
Usethisfimchun 0 cc w ererec mg aresehangeartoedirthetapeateach
recording date.
Til t
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH _. DATE SEARCH ‘
t-(no indicator) t-J ’
(3) Press 'r or iv an the Remote Commander to select the date for playback then
press EXECUTE on the Remote Commanderr
Searching the boundaries starts, and playback automatically starts at the scene
with the date selected. Even if yDu do rim press EXECUTE, searching the
boundaries starts automatically in two seconds after you select the date.
[al Actual point you are trying to search for
[I1] Present point on the tape
To stop searching
Press STOP on the Remote Cammander. , ‘
If a tape has a blank portion in tha
portions
The date search function may ml work correctly.
g nning of the tape or between recorded
Micro Cassette memory
The tape cassette memory can hold 20 recording data data.
82
‘ _l ‘ aiuso7ADP-Nr.gas(n7sm2) az meagnam ‘
7 |
DCR-H’ZlO/H’ZZO 3-076v897-11(1).US
_H v IL
._ Editing —
Dubbing a tape
Using the AIV connecting cab|e
You can dub or edit on the VCR connected to your camcorder using your mmmrder as
a player. Connect your camcorder to the VCR using the A/V connecting cable. The
r supplied A/V connecting cable is equipped with an 5 video plug and a video plug. Use
either the 5 video plug or lhe video plug depending on the recorder. Do not connect
both of the plugs to the recorder,
Bafnre operation
\ . Set DISPLAY in - to LCD in the menu settings. (The default setting 15 LCD.)
0 has the follcwirg buttons to make the indicator disaper so that they will not be
superimposed on the edited tape:
. On your camcorder;
DISPLAY/TOUCII PANEL
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
Bump; I
(1) insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded tape into ycur camcorder
(2) Prepare the VCR fur recording, then set the input selector to LINE.
Refer to the operating instructions or the VCR.
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR.
Refer to the operating instructions of your VCR.
, A/V connecting
z; ; Signal flow cable (supplied)
when you have finished dubbing a tape
Stop recording on the VCR, and stop playback on ynur camcorder. ,
T | alusnuEnT-Nrpeawsmeal a; azuumm I |7
DCR-IPZIO/IPZZO 3-076-897-11(1).US
Dubbing a tape
——————————————-——_—_—
Von can edit on VCRS that suppprt the fullnwing systems
8 mm, Mimi-HS, B Digitalfi, ME VHS, mas-VHS, MEE VHSC, S-VHSC»
m Betamax, ED Betamax, “m mini DV, “7 DV or my MICROM'V
If ynuv vcx is a monaural type
Connect the yellow plug of the A/V connecting cable h: the video input jack on the
VCR and the white or red plug to the audio input jack on the VCR or TV. When the
white plug is connected, the left channel audio is output and when the red plug is
connected, the right channel audio is output.
If your VCR has an 5 video jack
Connect using the 5 video plug to faithfully obtain original pictures. With this
connection, you do nut need to connect the yellow (video) plug of the A/V connecting
cable. Connect the 5 video plug to the Svideo jack of the VCR. This connection
prodilces higher quality MICROMV format pictures.
Using the i.LINK cable
Simply connect the i.LlN'l< cable (optional) to the i.LI.NK (MICROMV Interface) of your
camcorder and to the LLIN'K (MICROMV interface) of the WGOMV product. With
digital-tD-digital connection, video and audio signals are transmitted in digital form for
highaquality editing (You cannot connect your camcorder to a DV product.) You cannot
club the titles, displayed indicators, the cements of Micro Cassette Memory, or letters on
the “Memory Stick” index screen. '
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
the recorded rape into your camcorder.
(2) Prepare the VCR for recording,
(3) Set the POWER switch to VCR.
(4) Play back the recorded tape on your camcorderr
(5) Start recording on the VCR. Refer to the operating instructions of the van
i»
|.LINK (MICROMV
lnurfaco)
i.LlNK (MICRO MV Interface)
it
fl : Signal flow
irLINK cable (optional)
84
—‘ | umsneEDT—thSSIDEJ-Ovm 54 425/02235FM < | i—
DCR-lPZlD/ll’ZZD 3-D7s89771 1(1).U$
J! , , lg
Dubbing a tape
—-—-—.———_—
When you have finished dubbing a tape
Slop recording on me VCR, and stop playback on ynur camcvrder.
You can connac‘t one vcn only using the i.LINK fable
See page - - for more information uhoul mmc
Pictures processed by the picture affect, the digital effect or PE ZOOM function
Tfuzse pictures are not output through lhe irLINK (MlCROMV Interface).
The following functions do run work during digital editing:
-l=icluxo effect ,
—Digilal effect l
—PB zoom
Nam on playback pause pictures ,..
When you recon! a playback pause picture: 2
-The recorded pictuxe bEWm$ rough when recorded through the i.LINK (MICROMV 3
Interface). »
- The pinure may jmer when you play back the hope on other video equipmenr, And
more maybe a time-lag when you play back the mpg on other vldeo equipment.
T ’ utususEDT-m'psslnuml 55 fl2.A,2A,5:SEPM I I,“
DCR-[PTIO/IHZD 34776-3974 1(1).US
86
Recording video or TV programs
You can record a tape Prom another VCR or a TV program from a TV ma: has videu/
audio outputs. Use your camcorder as a recorder.
Switching the video input jack of the AN connecting cable
The supplied A/V connecting cabie is equipped with an 5 video plug and a video plug.
You have to select one of the jacks in the menu settings. The deifiiflt setting is VIDEO
15 the eeiup is not necessary, gu to ”I Making a recording" on page - .
(1) Set the POWER switch to VCR.
(2) Press FN to display mam.
(3) Press MENU, uien select VXDEOINI’UT in in the menu settings, lhen press
EXEC
(4) Select VIDEO (When using a videc plug) or 5 VIDEO (When using an 5 video
plug), then press EXEC.
To return to PM
Press EXYL
—‘ I musnuEurN'rpesweaosn) as 02,424,235 PM
DCRJPZID/IPZ’ZU 3-076-397-11(1).US
T i
441 "v
Recording video or TV programs
fl Making a recording
Before operafion
Set DISPLAY in E to LCD in the menu settings (The default setting is LCD.)
(1) Insert a blank tape (or a tape you want to record over) into your camcnrder, If
yuu are recording a tape from the VCR, insert a recorded [ape into the VCR.
(1) Set the POWER switch to VCR.
(3) Set your camcorder in the recording pause mode,
Press FN end gu to PAGES, then pres
PAUSE.
(4) Start playback on VCR if you recurd a tape from VCR. Select a TV program if
you record from We The picture from VCR or TV appears on the LCD screen
or in the viewfinder.
(5) Press REC START at the scene where ynu want to start recording from.
VCR
fl : Signal flow
our
@ s vmeo
0 VIDEO
oHumo
Hi i
Red
REC CTR]... Next, press REC
max-
A/V connecting cable
(supplied)
When you have finished dubbing a tape
Press (I! on the LCD screen to stop recording an ymn‘ camcorder and stop playback
on VCR or TV.
j I musoesnmrpasmraneo)
B7
mama. 4:37 m
DCR-MlO/IPZZD 37W67897-11(1).U5
87
Bump: i
Recording video or TV programs
Using the Remote Commander
in step 3, press 0 REC and the bumm next to it simultaneously, then immediately press
II. in step 5, press II at the scene where you want to Stan recording hut-n
PAUSE
CHECp‘: -. II
your C 153 monaura type
Connect the yellow plug of the A/V commcling cable to the video output jack and the
white at the red plug to the audio output jack on the VCR or the W. When the white
plug is connected, the left channel audio is output and when the red plug is connected,
Ihe right channel audio is output.
"your TV or VCR has an S video jack
Connect using the Svideo plug tn faithfully obtain angina! icturs. With this
connection, you ule not need to connect the yellow (video) plug of the A/V connecting
eehle. Connect the Svideo plug to the 5 video jack of the VCR. This connection
pmducs lughet quality MICROMV lnrma! pictuts.
A/ofe »
' When You 7 on! phm’res airing Tile Remafe (minim/er,
‘HIC VCR may 9 “Te im/anferlf- If 1411's hnflaehs‘mhanje file
remit» com ant/0P- Je if file vck Tn file male af/lek film
VTR2 , o cal/er fie mafe fem-or of ‘f/le VcR wifli lilac/4 pal/Den
88
m usossmmasflnsa-m) as
team. «37 PM I l“
DCR-LPZlO/MZO 3-076-897-11(1].US
LJJ
j:
Recording video or TV programs
———-——-——-———__—_.
simply connect the LUNK cable (optional) to the cm (MICROMV interface) oi your
camcorder and to the rum (MICROMV interface) or the M'ICROMV product. With
digital-to-digital connection video arui audiu signals are transmitted in digital form for
high-quality editing. (You cannot connect your camcorder to a DV product.)
(1 ) Insert a blank tape (or a tape you want no record over) into your camcorder,
and insert the recorded tape into VCR.
(2) Set the POWER switch (OVER
(3) Start playback on VCR. The picture from the VCR appears on the LCD screen
of your camcorder. t
(4) Set your camcorder in the recording pause mode. ,
Press m and go to PAGES, then press an REC CTRL. Next, press REC “—
PAUSE. g:
(5) Eras REC SEART at the scene where yuu want to start recording. 5
LLINK (MICRUMV
LLINK (MICROMV “fig-face)
lnlefiare)
fl : Signal flow
mwx able (optional)
when ynu have finished dubbing a tape
press [11 on the LCD screen to stop reminding on your camcorder and slop playback
on VCR or TV.
89
—‘ I ulusanDr-Nr.pe5laewsal so 4/3902.fl:37PM J |'—
DCR-lPZlD/EPZZD 3»U76-897e11(1).U$
Recording video or TV programs
Using the Remote Commandaer
in step 4, press 0 REC and thebution next to it simultaneously, then immediately press
u. in step 5, press u at the scene where you want to start recording from
Notes
- When an incompatible picture (such as one recorded with the DV tormet) is input, the
message "INPUT ERROR" appears.
- You can connect one VCR only using the imix cable.
- First, start playback or rum to the playhactt pause mode before your tnrncorder starts
recording or turns to the reoording pause mode. it no signal is input into your
oarnoorder, the mesage "NO 1mm" appears and the camcorder cannot start
recording.
Note on playback pause pictures
When you record a playback pause picture.
t'l'he recorded picture hecorries tough when reoorcled through the trim (MICROMV
Interface). i
- The picture may jitter when you playback the hope on other video equipmenh And
there maybe a time-lag when you play hack the tape on other video equipmnk.
Before recording
Make sure if the MPEG IN indicator appeals on them: screen The MPEG lN
indicator may appear on both equipment.
90
—| I aiusuosurwrpiswss-usm so «enmity PM
DCR-ll’ZlU/fl’lZO 3-076-897-11(1)rU5
, 1
xi
Superimposmg a title
_—_—
You can superimpose a title for five seconds from the recording start perm. When you
play back the tape, the title is displeyed for about five seconds from me perm where
yeu superrrnpeseel h.
(1) Set the POWER switch to CAMERA.
(2) Press FM and go to PAGEZ.
(3) Press TITLE. The TITLE screen appears,
(4) Select with 1/1. The PRESET TITLE screen appears Press EXEC.
(5) Press 1/1 to select a desired side, then press EXEC. The title is displayed on ihe
‘ LCD screen.
(6) If necessary, change the colorr size or position by pressing COLOR, SIZE,
POS I, or P05 1
(7) Press m1; OK. The screen in save a tide appears on the LCD screen.
(8) Press SAVE TITLE. ’
The mu indicator appears. And when you press START/STOP to start
recording,
TITLE SAV'E appears on the LCD scxeen for about five seconds and the title is
seen ' ’
j J musoasnwr psemnum er 024.25, m AM
DCR-lmlD/IPHO 3~D76-897-11(1)4US
I W
Superimposing a title
,, mm ...
TITLE mama? 1
» ms. 4
run n 1
L1 m El {m1 1
4 4
"awn-Gm A
mama; 5“ Mum 5
mm vs“:
M w “w
r Ijj DZI El E III El El IE ,
5-7
.5flmt@m wu an“ m m
mm um"
mama's“
"m » few/Amman
film m mu
EEE- ,
5m an 9) say - @-om
mus
VACATlcN » women
El
If you set the wrixe~prutacl tab tn luck
You cannot supeflmpose or erase the title, Slide the write-protect tab to release the write
yrctectiont
To use the custom title
1; you want to use the custom title, select
On a blank ponicn 0! the tape
Ynu cannot supefimpose a title on the tape.
92
—| ‘ muswsmvmmswsnwz) 92 02A.25,9:25AM ’ [7
DCR-l'PZlfl/IPZ2O 3-076-597v11(1),US
Superimpusing a title
————_—_
If the tape has a blank portion in the beginning cfthe tape ctr between recorded
portion
The title may not be displayed correctly
The titles superlmpnsed with your camcorder
-'rhey are displayed only by the MICROMV innnat video Equipment with index tiller
function.
-'l'he point you superimposed the title may be detected as an index Sigiml when
searching a recording with other video equipment.
To not dlsplaymle during playback
Set TITLE DSPL to on: in the menu settings (p
Title setting
-The title color changes as follows:
EWI-flTE—vYELLOWflVIOLET—vREDa CYAN—vGREEN—v BLUE]
-The title size changes as follows-
SNLALL a—r LARGE
You cannot input 13 characters or more in LARGE size If you input more than
12 chamcters, tlw title size returns to SMALL even ilxyau select LARGE.
-If you select the title size "SMALL‘Z you have nine choices for the title position
If you select the title size "LARGE”, you have eight dwices fer the title position.
The number of titles recordable all one cassette
You can record up to 20 titles when each title consists of 12 characters.
When 20 titles are already superimposed
The message ”lie Tl'l'LE FULL" appears. Erase unnecessary titles
—| | musnsEDT—m’pnfile-mz) sa newsman AM
ncx-mw/mm a-wfi-sw-miws
93
fl-mlrla I
[I
Superimposing a title ‘
You can superimpose a title for five seconds from the recording start palm.
(1) Set the POW'ER switch to VCR. T
(2) Press PM to display PAGEL 5“
(3) Press TITLE. The TITLE screen appeal-s.
(a) Prss INPUT 11m. The mu; SET screen appears
(5) Pass <-/-> to select the direction to scan. Your camcorder slams scanning in
the selected direction. When you select ->, the thumbnails are displayed fwm
the upper-left window, and when you select h, they are displayed from the
Iowa-right window. After the summing is completed, the thumbnails axe
displayed on the index screen.
(6) Select the thumbnail on which you want to superimpose a fille,lthen press: l
EXEC] The title menu appealsl ‘ l
(7) Perform step 5 m 7 in ”Superimposing a title on staffing a recording" on page
(8) Press SAVE TITLE.
"TITLE SA ” appears on the LCD screen for about five seconds and the title
is set.
3 ”LE
->
5,6 WTLESET- ' a
DElEEle'figN »
Elc=lm - can: -
7.8 “film:
E’s-sowsvmv » VACATION
vmz
we
94
—| | oxuscsEuT-NTpssmsl-loz} 94 mks/mu! PM ‘ ,_
DCR-D’llU/D’HO 3-076-897711(l).US
11
71
Superimposing a title
-——_——_________.__—
Notes
~Thumhneiis may not be displayed depending on the condifinn of the tape. This is not
a malfunction.
- Nuise my appeei on the thumbnails, However, mis has no effect on the recorded
imagml
- You amok execute mu: SAVE until the playback picture is displayed in step a.
To use a custom tit]!
Lfylm mm to use a custom title, select in step 7,
95
—IJ omSnBEDT~NT.n£5(091-|M) as neazazsm ‘
7 |
DCRAII’ZID/IPZZO 3-076-897~11(l).US
Superimposing a title
(1) Set the POWER switch to CAMERA a: VCR
(2) Press FN to display PAGE]. ‘
(3) Press MENU, then select TITLEERASE in m in me menu setting, then press
EXEC (pr ~ c). ' ‘
(4) Press 1/ T to select the title you want to erase, then pras EXEC. ‘
”ERASE OK?” appears. 1
(5) Make sure the title is the one you want to erase, then press OK ’ 1
The message "ERASWG" flashes while erasing. After the naming is completed, 9 l
the message "comm" appears.
} o’fi‘ufimwlm ‘ ”5’s"
2 ERASE OK7
s m m
To return to PM
P155 EXIT.
To cancel erasing
Press CANCEL in step 4.
96
j I UlUSDsEDT—NTpflSfflm—mz) sn mum-27m \ ‘ |—'—
Dcwzm/n’zzu 3707sss7rn(1).us
Making your own titles
Yuu can make up to two titles and store them at the memory a! your camcorder. Each
title can have up to 20 characters.
(1) Set the POWER switch to CAMERA.
(2) Press FN and go to PAGEZ.
(3) Press nTLE.
(4) Press 1/1 to select -. The TITLE 5151- screerr appears. Press EXEC.
(5) Press 1/1 to select CUSTOM] SET Gr CUSTOMZ SET, then press EXEC.
(a) Select the desired character. Repeat pressing a key ta select the desired
chaficter on the key,
(7) Press —> to move the cursor for the next character, Reyeat the same procedure
as steps 6 and 7 to complete your line. m
(8) Press SET, The title is stored in memory. g
a.
' 1
ii
97
—‘ ‘ musnsEDr-Mpwnsmuey 97 nausunu ’ r—
DCR-lPZlO/IP’ZZO 3-076-897711(1].US
98
Making your own titles
._...______._..____._..__._______
To return to FN
Press EXlTi
To change a title you have stored
In step 5, select CUSTOMl 51:1 or CUFIOMZ SET depending on which title you want
to ehange, then press EXEC and enter the new titie as desired.
To superimpose your own title on tape
Follow the procedure in ”Superimposmg a title on starting a recording" on page - -.
If you take flve minutes er longer to enter charaflers in the standby mode while a
cassette is In your camearder
v The power automatically gnu off. The characters you have entered remain stored in
memery. Set the POWER switch to on: (Cl-KG) and start again From Stepm) mmpiete
your title. ,
We reeonunend setting the POWER switch to VCR (p, - ~) or removing the cassette so
that your ammrder riees not automatically tum ottwhiie you are entering title
characters
”to erase the character
Press r—. The last character is eased.
To enter a space
Frees q.
To enter the character on the same button in succession
Press —- m move the cursor to the nmtt position and enter the character.
T| OluSOSEDT-N'fpsfiwshmzl ss 4m,uoPM
DCR-lPZlD/lPZZfl 10767897A11(1).LTS
‘ l
t l
' 1L
ll 41
Making your own titles
(1) Set the POWER switch to VCR.
(2) Press FN to display PAGEl.
(3) Press TITLE The mu: screen appears.
(4) Press TITLE SET. The 11115 SE: screen appears,
(5) Press 1/1 to select CUSTOM] SET or CUSTOMZ SET, then press EXEC
(5) Perform Steps 6 and 7 in "Making a title in CAMERA made" on page l t
(7) Press SETA The title is stored in memory.
rm:
EV
‘5 "gift 4.
mmm
*@Ew
/ ~ mumw [51W]?
7 W
2 SET »
II! AII lfi
To return to FN
Press EXIT
To superimpose your own title on tape
Folluw me pmcedure m "superimposing a title on surfing a reccrding” on page - -;
99
—| l ntusu»snm1.nes(caum) as magimzsm i r
DCerPZlD/[FZZU 3»D76—897~11(1)AU5
The Micro Cassette Memory ,
The MICROMV cassette automatically records the recording settings and date. When
yau insert a cassette or set the POWER switch to CAMERA or VCR, the cassette
information is displayed for about five seconds,
RECORDED AREA
[a] The unique number of each cassette Your camcorder automatically assign this
numbers ,
[h] The cassette title set by TAPE TITLE in the menu settings (Cassette label)
{<1 The first-recorded. date in this cassette.
[d] The last-recorded date in this cassette
[e] The recorded area is indicated by the white bar.
Recorded areas ,
A blank portion between recorded area is also indicated as a recorded area.
Cassette information
Ycu an tum ofi the cassette information using m INFODSPL in In the menu
settings.
when - gr " is flashing
Eject the cassette and insert it again, If the mssage is still displayed, the Micro Cassette
Memory may be currupled. Replace the cassette with another cassette.
100
7 ’ OiUSWEDT-prflmsvmz) mo alas/02. 2:41 PM ‘
7 |
DCR'IPZIO/LFLZU 3-076-897»11(1).U5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2002:07:24 12:58:51+09:00 Create Date : 2002:07:05 14:28:34+09:00 Creator : Acrobat 5.0 Scan Plug-in for Windows Page Count : 50 Mod Date : 2002:07:24 12:58:51+09:00 Creation Date : 2002:07:05 14:28:34+09:00 Producer : Acrobat 5.0 Scan Plug-in for Windows Metadata Date : 2002:07:24 12:58:51+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools