Sony Group DTPT1001 PSP Development Tool User Manual DTP H1500A DTP L1500A

Sony Corporation PSP Development Tool DTP H1500A DTP L1500A

Contents

Manual 1500

DTP-H1500A DTP-L1500A 2-591-231-12(2)Instruction manualSCE CONFIDENTIALDTP-H1500 ADTP-L1500 ATesting ToolThis manual contains safety precautions for the prevention of accidents,and instructions for the use and handling of this product.Read this manual carefully and use the product in a safe manner. Afterreading the manual, store it in an accessible location for future reference.2-591-231-12(2)
2DTP-H1500A DTP-L1500A 2-591-231-12(2)WARNINGWARNINGTo avoid electrical shock, do notopen the cabinet. Refer servicing toqualified personnel only.Use the supplied AC adaptor only. Ifyou use other types, it may cause fire,electrical shocks or a malfunction.Laser specificationsUMDTMWave length: 655-665 nmPower: max 0.28 mWType: Semiconductor, continuousDVD-ROMWave length: 640-660 nm (DVD)775-805 nm (CD)Power: max 0.3 mW (DVD)0.23 mW (CD)Type: Semiconductor, continuousFor customers in the U.S.A. and CanadaCAUTIONThe use of optical instruments with this product willincrease eye hazard. As the laser beams used in the DVD-ROM and UMD™ drives are harmful to eyes, do notattempt to disassemble the cabinet.Refer servicing to qualified personnel only.This label is located on the DVD-ROM laser protectivehousing inside the enclosure.For customers in the U.S.A.CAUTIONUse of controls, adjustments or performance of proceduresother than those specified herein may result in hazardousradiation exposure.NOTE:This equipment has been tested and found to comply withthe limits for a Class A digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to providereasonable protection against harmful interference when theequipment is operated in a commercial enviroment.This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used inaccordance with the instructions, may cause harmfulinterference to radio communications.Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will berequired to correct the interference at his own expense.You are cautioned that any changes or modifications notexpressly approved in this manual could void yourauthority to operate this equipment.FCC Radio-Frequency Exposure StatementThis equipment complies with FCC radiation exposurelimits set forth for an uncontrolled environment. Thisequipment should be installed and operated with minimumdistance 20 cm between the radiator and body. Thistransmitter must not be co-located or operating inconjunction with any antenna or transmitter.Owner’s RecordThe model and serial numbers are located on the side of theunit. Record the serial number in the space provided below.Refer to these numbers whenever you call for technicalassistance at the number shown in "Contact information" onthe back cover of this instruction manual.Model No.DTP-H1500 ADTP-L1500 ASerial No.______________For customers in CanadaThis Class A digital apparatus complies with CanadianICES-003.The term “IC” before the equipment certification numberonly signifies that the Industry Canada technicalspecifications were met.Operation is subject to the following two conditions; (1) thisdevice may not cause interference, and (2) this device mustaccept any interference, including interference that maycause undesired operation of the device.Pour les utilisateurs au CanadaCet appareil numérique de la classe A est conforme à lanorme NMB-003 du Canada.Le terme “IC” avant le numéro d’homologation ne signifieseulement que les normes d’Industrie Canada ont étérespectées.L'utilisation de ce dispositif est autorisée seulement auxconditions suivantes : (1) il ne doit pas produire debrouillage et (2) l'utilisateur du dispositif doit être prêt àaccepter tout brouillage radioélectrique reçu, même si cebrouillage est susceptible de compromettre lefonctionnement du dispositif.WARNING
3DTP-H1500A DTP-L1500A 2-591-231-12(2)WARNINGFor customers in EuropeCAUTIONThe use of optical instruments with this product willincrease eye hazard. As the laser beams used in the DVD-ROM and UMD™ drives are harmful to eyes, do notattempt to disassemble the cabinet.Refer servicing to qualified personnel only.This label is located on the DVD-ROM laser protectivehousing inside the enclosure.This appliance is classified as a CLASS 1 LASER product.The CLASS 1 LASER product marking is located on the sideof the product.This equipment complies with EN55022 CLASS B andEN55024 for use in the following areas: residential,business, and light-industrial.This equipment has been tested and found to comply withthe limits set out in the R&TTE Directive using a connectioncable shorter than 3 metres.Audio and picture distortion may occur if this equipment ispositioned in close proximity to any equipment emittingelectromagnetic radiation.If this unit is affected by static electricity or burst-noise, itmay not work correctly.WARNINGFor customers in Korea0 4 1 2
4DTP-H1500A DTP-L1500A 2-591-231-12(2)For your protection, please read thesesafety instructions completely beforeoperating the appliance, and keep thismanual for future reference.Carefully observe all warnings,precautions and instructions on theappliance, or those described in theinstruction manual and adhere to them.USEPower sourcesThis unit should be operated only from the type ofpower source indicated on the marking label. If youare not sure of the type of electrical power suppliedto your home, consult your dealer or local powercompany. For those units designed to operate frombattery power, or other sources, refer to theoperating instructions.OverloadingDo not overload wall outlets, extension cords orconvenience receptacles beyond their capacity,since this can result in fire or electric shock.Liquid and foreign objectsNever push objects of any kind into the unit throughopenings as they may touch dangerous voltagepoints or short out parts that could result in a fire orelectric shock. Never spill liquid of any kind on theunit.AttachmentsDo not use attachments not recommended by themanufacturer, as they may cause hazards.CleaningUnplug the unit from the wall outlet before cleaningor polishing it. Do not use liquid cleaners or aerosolcleaners. Use a cloth lightly dampened with waterfor cleaning the unit exterior.INSTALLATIONWater and moistureDo not use the powerline operated unit near water –for example, near a bathtub, washbowl, kitchensink, or laundry tub, in a wet basement or near aswimming pool, etc.Power cord protectionRoute the power cord so that it is not likely to bewalked on or pinched by items placed upon oragainst it, paying particular attention to the plugs,receptacles, and the point where the cord exits fromthe unit.VentilationThe slots and openings in the cabinet are providedfor necessary ventilation. To ensure reliableoperation of the unit, and to protect it fromoverheating, these slots and openings must never beblocked or covered.–Never cover the slots and openings with acloth or other materials.–Never block the slots and openings by placingthe unit on a bed, sofa, rug or other similarsurface.AccessoriesDo not place the unit on an unstable cart, stand,bracket or table. The unit may fall, causing seriousinjury to a child or an adult, and serious damage tothe unit.Use only a cart, stand, tripod, bracket, or tablerecommended by the manufacturer.An appliance and cart combination should bemoved with care. Quick stops, excessive force, anduneven surfaces may cause the appliance and cartcombination to overturn.– Never place the unit in a confined space, suchas a bookcase, or built-in cabinet, unlessproper ventilation is provided.–Do not place the unit near or over a radiator orheat register, or where it is exposed to directsunlight.Important safeguardsImportant safeguards
5DTP-H1500A DTP-L1500A 2-591-231-12(2)SERVICEDamage requiring serviceUnplug the unit from the wall outlet and referservicing to qualified service personnel under thefollowing conditions:–When the power cord or plug is damaged orfrayed.–If liquid has been spilled or objects have fallenonto the unit.–If the unit has been exposed to rain or water.– If the unit has been subject to strong physicalshock by being dropped, or the cabinet hasbeen damaged.– If the unit does not operate normally whenfollowing the instruction manual. Adjust onlythose controls that are specified in theinstruction manual. Improper adjustment ofother controls may result in damage and willoften require extensive work by a qualifiedtechnician to restore the unit to normaloperation.– When the unit exhibits a distinct change inperformance – this indicates a need for service.ServicingDo not attempt to service the unit yourself asopening or removing the exterior casing may exposeyou to dangerous voltage or other hazards.Refer all servicing to an authorized service center.Refer to the contact information on the back coverto receive instructions on obtaining repair/replacement services.Replacement partsWhen replacement parts are required, be sure theservice technician has used replacement partsspecified by the manufacturer that have the samecharacteristics as the original parts.Unauthorized substitutions may result in fire,electric shock, or other hazards.Safety checkUpon completion of any service or repairs to theunit, ask the service technician to perform routinesafety checks (as specified by the manufacturer) todetermine that the unit is in safe operatingcondition.Important safeguardsImportant safeguards
6DTP-H1500A DTP-L1500A 2-591-231-12(2)SafetyThis product has been designed with the highest concern for safety. However, any electrical device, ifused improperly, has the potential for causing fire, electrical shock or personal injury. To help ensureaccident-free operation, follow these guidelines.• Observe all warnings, precautions and instructions.• Stop use and unplug the AC power cord from the electrical outlet if the unit functions in an abnormalmanner, or produces unusual sounds or smells.• Call the number listed on the back cover for technical assistance if the device does not operateproperly.•Do not remove the unit’s exterior or disassemble the unit. The laser beam emitted from the lens of thisunit may be harmful to the eyes.• Do not use the unit near water.• Stop using the unit immediately if you experience any of the following symptoms. If the conditionpersists, consult a doctor.– Lightheadedness, nausea or a sensation similar to motion sickness– Tired, uncomfortable or aching hands or arms– Tired, dry or aching eyes•Avoid looking at the screen for prolonged periods of time.•Listening to sound continuously for a long time with a high volume may adversely affect the ears. Becareful, especially when using headphones. Adjust the volume so that surrounding sounds can beheard.• Do not close the disc tray or disc cover in a way that could pinch your hand or fingers, as personalinjury or damage to the unit could result.• The socket outlet shall be installed near the equipment and shall be easily accessible.Use and handling•Do not use the unit or accessories outdoors.• Do not throw or drop the unit or accessories, or expose the devices to strong physical shock. Handlethe analog stick with care.• Do not forcibly twist the controller or expose it to strong physical shock, as doing so can causedamage.• Do not place the unit or accessories on surfaces that are unstable, tilted or subject to vibration.• Do not expose the unit or accessories to high temperatures, high humidity or direct sunlight.• Do not block the vents.• Do not wrap the unit or accessories in cloth or similar materials.• Do not allow dust to build up on the unit.• Do not place the unit in locations of poor ventilation, such as small, enclosed areas, directly against awall or on a thick carpet or bedding.• Do not expose the unit to dust, smoke or steam.• Do not allow liquid or small particles to get into the unit.• Do not put heavy objects on the unit.• Do not place anything in front of the disc tray.• Do not use damaged, reshaped or repaired discs.• Do not touch or insert foreign objects into the connectors of the unit or accessories.• Do not insert cords and cables at an angle. Doing so may damage the connector pins or create the riskof fire.• Do not set the unit other than in the vertical position.• If a spring or screw is provided to secure a cable connector, use the provided spring or screw to secureit. Take care to prevent making faulty connections.PrecautionsPrecautions
7DTP-H1500A DTP-L1500A 2-591-231-12(2)AC adaptor and AC power cord use•To help ensure safe operation, during initial setup and regularly thereafter, inspect the AC adaptor andAC power cord. If damaged, stop use immediately and call the number on the back cover for assistance.• Do not use AC adaptors or AC power cords other than those provided or designated in the instructionmanual. If the provided or designated AC adaptor or power cord is not used, electrical shock mayresult or the unit may not operate.• Do not modify or damage the AC power cord.• Do not place the AC adaptor between the unit and a wall or shelf.• Do not place heavy objects on the AC power cord.• Check that there is no dust or lint on the power plug before inserting into an electrical outlet. If theplug becomes dirty, wipe it off with a dry cloth before connecting.• When inserting the AC power cord into an electrical outlet, insert the plug straight into the electricaloutlet and not at an angle.• Unplug the AC power cord from the electrical outlet before cleaning or moving the unit, or when youdo not intend to use the unit for an extended period of time. When disconnecting, grasp the power cordby the plug and pull straight out of the electrical socket. Never pull by the cord and do not pull out atan angle.• Do not touch the plug of the AC power cord with wet hands.• Do not touch the power plug during an electrical storm.• Do not touch the unit or AC adaptor for extended periods of time while the unit is turned on, asextended contact may cause low-temperature burns.Cleaning•For safety reasons, before cleaning the unit or connected accessories, 1) turn off the unit, 2) disconnectthe power plug for the unit from the electrical outlet.Moisture condensation•If the unit or disc is brought directly from a cold location to a warm one, moisture may condense onthe lens inside the unit or on the disc. Should this occur, the unit may not operate properly. In this case,remove the disc and turn off and unplug the unit. Do not put the disc back in until the moistureevaporates (this may take several hours). If the unit still does not operate properly, obtain technicalassistance using the contact information on the back cover.Photosensitivity•A very small percentage of individuals may experience epileptic seizures when exposed to certain lightpatterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or whileplaying video games, including games played on the unit, may trigger an epileptic seizure in theseindividuals. Certain conditions may trigger previously undetected epileptic symptoms even in personswho have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epilepticcondition, consult your physician prior to playing. If you experience any of the following symptomswhile playing a video game - dizziness, altered vision, eye or muscle twitches, loss of awareness,disorientation, any involuntary movement or convulsions - IMMEDIATELY discontinue use andconsult your physician before resuming play.Radio waves•Radio waves may affect electronic equipment or medical devices (for example, pacemakers), whichmay cause malfunctions and possible injuries.- If you use a pacemaker or other medical device, consult your physician or the manufacturer of yourmedical device before using the wireless networking feature.- Keep the unit at least 9 inches (23 cm) away from a pacemaker or other medical devices when usingthe wireless networking feature.PrecautionsPrecautions
8DTP-H1500A DTP-L1500A 2-591-231-12(2)This unit is equipped with features for the development of PSPTM software.• PSPTM features are provided for efficient software development.• Two types of drives are built in: a UMDTM drive, and a DVD-ROM drive, which is used duringdevelopment. A switch is used to select the desired drive.For details, contact technical support using the contact information on the back cover.About this productAbout this product
9DTP-H1500A DTP-L1500A 2-591-231-12(2)Unit frontPart names and usageDRIVE SELECTPOWERF1F2UMDCONTROLLERGPOGPION OFFDVD07654321012345671 On/standby button, powerindicatorThis button turns the unit on and off.To turn on the unit, press the on/standby buttonwhile it is in standby mode. The indicator thenturns solid green when the system is ready. Theunit status can be determined by the color of thepower indicator.2 Disc coverThe open button (3) is used to open the coverso that UMDTM can be inserted. When closing,press the middle of the upper edge of the disccover.3 Open buttonThis button is used to open the disc cover (2).4 Memory Stick DuoTM accessindicatorTurns orange while the unit is accessing aMemory Stick DuoTM or Memory Stick PRODuoTM that has been inserted into the unit.5 Memory Stick DuoTM slotThis slot accepts Memory Stick DuoTM orMemory Stick PRO DuoTM media.6 USB connectorFor connecting USB connectors (mini-B type).When the included controller is connected to theUSB connector, the controller’s USB connectorbecomes functional.7 Drive select buttonSwitches between the UMDTM drive and theDVD-ROM drive.The selected drive is identified by the UMDTM/DVD-ROM drive indicators (8). The driveselect button (7) can be used only when thepower indicator of the controller is not lit.8 UMDTM/DVD-ROM drive indicatorThe indicator for the drive, UMDTM or DVD-ROM, turns orange to indicate which drive isselected.9 Open/close buttonThis button is used to open/close the DVD-ROMdrive.q; F1 buttonThis button will be used for future functionupgrades.For use by service personnel only.qa F2 buttonThis button will be used for future functionupgrades.For use by service personnel only.qs DVD-ROM driveThis drive accepts DVD-ROM discs. Use theopen/close button (9) to insert and removediscs.2789q;qaqs34516qdqfqgqhPart names and usageSolid greenSolid orangeThe system is starting up(the unit can now be used)Standby mode
10DTP-H1500A DTP-L1500A 2-591-231-12(2)Unit rear1 AerialFor wireless LAN use.2 Extension connectorFor use by service personnel only.Part names and usagePart names and usageqd Controller portConnects with the commander interfaceconnector of the attached controller.qf GPO indicatorThese are eight indicators that are user-definableby PSPTM software developers.qg Headset connectorA dedicated PSPTM headset remote controller or acommercially sold headset (with a stereo mini-plug) can be connected here.qh GPI switchThese are eight dip switches that are user-definable by PSPTM software developers.EXTRF (EXT)DC IN19.5VLAUDI O OUTR1234678593 Dedicated connector for servicingFor use by service personnel only.CautionUsage of this port may cause irreparable damage to thesystem.4 VGA connectorConnects to a device with a VGA IN connector.5 AUDIO OUT connectorConnects to a device with an AUDIO INconnector.6 Vent fanVent for internal fan used to cool unit. Be surenot to obstruct this vent, as doing so may cause afire. Also, to prevent any hindrance to air flow,position the unit an adequate distance from walls.7 RF (extension) connectorConnects to an access point using a coaxial cable.8 ClampFor securing the aerial andAC adaptor to the unit.9 DC IN 19.5V connectorFor attaching the included AC adaptor.
11DTP-H1500A DTP-L1500A 2-591-231-12(2)Controller front1 LCD screen2 L button3 R button4 Up, down, left, right buttons5 △△△△△, ○○○○○, ×, □□□□□ buttons6 Power indicator7 Hold indicator8 Memory Stick DuoTM accessindicator9 WLAN access indicatorq; Analog stickPOWERHOLDSELECTHOME VOL STARTqa Strap holderqs Left speakerqd Right speakerqf Home buttonqg Volume - buttonqh Volume + buttonqj Display buttonqk Sound buttonql Select buttonw; Start button2489q;qaqs1qf qg qh qjqkqlw;3567qdPart names and usagePart names and usage
12DTP-H1500A DTP-L1500A 2-591-231-12(2)Controller front1 IR port2 USB connectorLR21Controller bottomController left Controller right1 WLAN switch 1 Power/hold switch11Part names and usagePart names and usage211 Left speaker2 Right speakerCautionDo not cover or insert foreign objects into the speakers as doing so may result in damage to the controller.
13DTP-H1500A DTP-L1500A 2-591-231-12(2)How to connectConnect the unit and controller as shown in the illustration below.Caution- When you connect or disconnect the controller, turn off power to the unit (keep it in standby mode). If the power is left on, itmay result in damage to the unit or the controller.- When turning on the unit, be sure to use the supplied AC adaptor.Turning on the unit1Connect the AC power cord to the AC adaptor, and connect the AC adaptor to therear of the unit.2Insert the power plug into an electrical outlet.The power indicator on the unit turns orange, and the unit enters standby mode.3Press the on/standby button on the unit.The power indicator on the unit turns green.4Press the drive select button on the unit, and select which drive to use.The selected drive’s indicator turns orange.5Slide the power/hold switch on the controller to the up position.The power indicator on the controller turns green, and the menu screen is displayed within seconds.How to useHow to useDRIVE SELECTPOWERF1F2UMDCONTROLLERGPOGPION OFFDVD0765432101234567POWERHOLDSELECTHOME VOL STARTPower indicator on the unit Power indicator on the controllerTo controller portTo USB connector
14DTP-H1500A DTP-L1500A 2-591-231-12(2)How to useHow to useTurning off the unit1Press the on/standby button on the unit and hold it down for longer than threeseconds.The power indicator on the unit will flash and then turn orange (and the system will enter standbymode).2Remove the power plug from the electrical outlet.Switch between the UMDTM drive and the DVD-ROM drive1Confirm that the power indicator on the controller is off.If the power indicator turns on, slide the power/hold switch to the up position for longer than fiveseconds to turn the controller off.2Press the drive select button on the unit, and select which drive to use.The selected drive’s indicator turns orange.3Slide the power/hold switch on the controller to the up position.The power indicator on the controller turns green, and the menu screen is displayed within seconds.
Inst B5 Ver.4.015DTP-H1500A DTP-L1500A 2-591-231-12(2)SpecificationsMain unit (DTP-H1500 A /DTP-L1500 A)Compatible discsCD-ROM / CD-R / DVD-ROM / DVD-R /UMDTMPowerInput voltage DC IN 19.5VPower consumption 5AOperating environmentOperating temperature 10°C - 35°COperating humidity 30% - 70%(not condensed)Dimensions (excluding protrusions)Testing tool 100 x 280 x 298 mmController 170 x 74 x 23 mm(w/h/d)WeightTesting tool 5.0 kg or lessController Approx. 470 g(including cables)ProcessorDedicated processor (max 333 MHz)External interfacesUSB connector x 1Memory Stick DuoTM slot x 1Controller connector x 1Headset connector x 1RF (extension) connector x 1Aerial x 1(For wireless LAN IEEE 802.11b)VGA connector x 1(Analog RGB, D-SUB, 15-pin)AUDIO OUT (audio output) connector x 1(RCA pin)Dedicated connector for servicing x 1(For use by service personnel only.)Extension connector x 1(Devices other than those designatedcannot be used.)Wireless LAN channelsUSA and Canada 1-11 ch.Europe 1-13 ch.AC adaptor (DTP-H100)PowerInput voltage AC 100 - 240V (±10%)Output voltage DC 19.5 VRated frequency 50/60Hz (±2%)Power consumption 1.6A (100V), 0.7A(240V)External dimensions160 x 38 x 80 mm(w/h/d)WeightApprox. 570 gSupplied accessoriesInstruction manual x 1AC power cord for use in Oceania x 1AC power cord for use in Europe x 1AC power cord for use in Korea x 1AC power cord for use in the UK x 1AC power cord for use in the USA andCanada x 1AC adaptor x 1Controller x 1(With controller-interface cable [1.5 m])Design and specifications are subject tochange without notice.Specifications
Inst B5 Ver.4.016DTP-H1500A DTP-L1500A 2-591-231-12(2)This product is supplied pursuant to and subject to the terms of the tool loan agreement with SonyComputer Entertainment Inc. or its affiliates. Other than as expressly set forth by SCEI and/or any of itsaffiliates, except to the extent prohibited by applicable laws, SCEI and/or any of its affiliates shall not beliable for any damages, including special, incidental or consequential damages, or fees arising out of theuse or inability to use this product.Limitations of liabilityLimitations of liability
Inst B5 Ver.4.017DTP-H1500A DTP-L1500A 2-591-231-12(2)
Inst B5 Ver.4.018DTP-H1500A DTP-L1500A 2-591-231-12(2)
Inst B5 Ver.4.019DTP-H1500A DTP-L1500A 2-591-231-12(2)
Contact information:Japan3rd Party Relations DivisionSony Computer Entertainment Inc.7-1-1 Akasaka, Minato-ku,Tokyo 107-0052 JapanTEL: +81-3-6438-8635 (direct)KoreaTechnology GroupSony Computer Entertainment Korea Inc.14Fl. Koosan Tower, 3250, Bangbae2-DongSeocho-Gu, Seoul, #137-853 KoreaE-mail: psp_support@scek.co.krTEL: +82-2-6230-3596 (direct)United Kingdom (Europe)Technology GroupSony Computer Entertainment Europe25 Golden SquareLondon W1F 9LD UKTEL: +44-207859-5777 (direct)http://www.scee.sony.co.uk/USADeveloper SupportSony Computer Entertainment America919 East Hillsdale Boulevard, 2nd FloorFoster City, CA 94404-2175 USATEL: +1-650-655-5566 (direct)FAX: +1-650-655-5511 (direct)Without obtaining the consent of the owner, no part of the content of this document may be copied, pursuantto the provisions of the Copyright Act.“” is a registered trademark and “ ” and “UMD” are trademarks of Sony ComputerEntertainment Inc.“SONY” and “ ” are registered trademarks and “Memory Stick Duo”, “Memory Stick PRO Duo” and “ ”are trademarks of Sony Corporation.© 2005 Sony Computer Entertainment Inc. All rights reserved.This product may fall within the scope of national export control legislation.You must comply fully with the requirements of such legislation and of all other applicable laws of anyjurisdiction in relation to this product.Printed in JapanDTP-H1500A DTP-L1500A 2-591-231-12(2)

Navigation menu