Sony Group DWTP01N Digital Wireless Transmitter User Manual 2X jpg

Download:
Mirror Download [FCC.gov]
Document ID	3194762
Application ID	mSN1ztpGEc3MhMBNzc2OVQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	307.01kB (3837577 bits)
Date Submitted	2016-11-14 00:00:00
Date Available	2016-11-14 00:00:00
Creation Date	2016-11-01 09:28:57
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-11-01 09:31:14
Document Title	2X.jpg
Document Creator	PScript5.dll Version 5.2.2
Document Author:	0005004916

SON‘Ys
Digital Wireless
Transmitter
Before Using this Unit
Before operating the unit, please read this manual thoroughly and retain it for
future reference.
DWT—POi N
© 2016 Sony Corporation Printed in Japan
ATTENTION
The electromagnetic fields at the specific frequencies may influence the sound
of this unit.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
When you dispose ofthe battery, you must obey the law in the relative area or
country.
RISK OF EXPLOSION IF BA'ITERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table—cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the
apparatus.
WARNING
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
If the transmitter develops an abnormally high temperature, a burning odor or
smoke during use, remove the battery holder and stop using the transmitter
immediately.
Take care not to burn your fingers when removing the battery holder as the
batteries may be very hot at this time.
The apparatus shall not be exposed to dripping or splashing. No objects filled
with liquids, such as vases, shall be placed on the apparatus.
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
For the customers in the U.S.A.
This equipment has been tested and found to comply with the limits fora Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
All interface cables used to connect peripherals must be shielded in order to
comply with the limits for a digital device pursuant to Subpart B of part 15 of FCC
Rules.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Use of Sony wireless devices is regulated by the Federal Communications
Commission as described in Part 74 subpart H ofthe FCC regulations and users
authorized thereby are required to obtain an appropriate license.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that is deemed
to comply without maximum permissive exposure evaluation (MPE).
For the customers in Canada
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence—exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
IC Exposure of Humans to RF Fields
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels ofRF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating effects
causes no known adverse health effects. Many studies of low—level RF exposures
have not found any biological effects. Some studies have suggested that some
biological effects might occur, but such findings have not been confirmed by
additional research. DWT—POi N has been tested and found to comply with IC
radiation exposure limits set forth for an uncontrolled environment and meets
RSS-102 of the IC radio frequency (RF) Exposure rules.
The term "ICz" before the radio certification number only signifies that Industry
Canada technical specifications were met.
This device operates on a no—protection no—interference basis. Should the user
seek to obtain protection from other radio services operating in the same TV
bands, a radio licence is required. Please consult Industry Canada’s document
CPC—2—1—28, Optional Licensing for Low—Power Radio Apparatus in the TV Bands,
for details.
CEO
For the customers in Europe
Before operating this unit, please read the separate R&‘lTE precautions
document.
Voor de klanten in Europa
Lees voordat u het apparaat gaat gebruiken eerst het aparte document met
waarschuwingen m.b.t. radio- en telecommunicatieontvangstapparatuur
(R&TTE).
For kunder i Europa
lnnan du anvander den harenheten ska du lasa det separata dokumentet om
forsiktighetsatgarder enligt R&TTE-direktivet.
Para clientes na Europa
Antes de utilizar esta unidade, leia o documento R&TTE fornecido em separado.
Til europaiske kunder
Laes det separate R&TTE-direktiv om forholdsregler, inden du betjener enheden.
Asiakkaille Euroopassa
Lue erillinen radio-ja telepa'atelaitteita koskeva varoitusasiakirja (R&TTE) ennen
laitteen kayttoa.
For kunder i Europa
Les det separate R&TTE-dokumentet med forsiktighetsregler for du bruker denne
enheten.
no Touc HEM-rec nou Stapévouv as xdipec tnc Eupobnnc
I'lpiv xpnorponornoas autr’w Tn povdéa, éich’rOTe T0 Eexmpimé évypaqno Mimi;
rrpocpuAdEewv tnc oénvioc R&TTE.
3a KnueHTMTe B EBpona
Hpeim na I/I3HOJ13BaTe ypena. MOMS] npoqueTe omenHI/IH HOKyMCHT
c npeunasI-m MCpKI/I 3a R&TTE (Radio and telecommunications
terminal equipment) (Pant/IoooopyttBaHe I/I KpafiHO
JIaIIeKOC1>OOH1VITeJIHO OOOpleBaHe).
Pro za'kaznl'ky v Evropé
Pfed pouiitim tohoto zafizenl’ si prostudujte bezpecnostni upozornéni v
samostatném dokumentu R&TTE.
Klientidele Euroopas
Palun tutvuge enne seadme kasutamist eraldi dokumendiga mis puudutab
R&TTE direktiivist tulenevaid ettevaatusabinousid.
Eurépai ‘Ligyfeleinknek
A ke’szulék haszna’latba vétele el6tt szfveskedjék elolvasni a radié— és tavkozlési
berendeze’sekkel kapcsolatos ovinte'zkedéseket ismerteté R&TTE dokumentumot.
Klientiem Eiropé
Pirms lietot so ierici, ludzu, izlasiet atsevisko R&TTE (Radiosakaru un
telekomunikaciju terminala iekartu) drosibas bridinajumu dokumentu.
Europos klientams
Pries naudodamiesi siuo prietaisu perskaitykite atskira R&TTE (Radijo ir
telekomunikaciju terminalu) atsargumo priemoniu dokumenta.
Dla klientéw w Europie
Przed przystapieniem do korzystania z tego urzadzenia naleZy przeczytac’
oddzielny dokument dotyczacy srodkow ostroinos'ci wynikajacych z dyrektywy
w sprawie urzadzen radiowych i koncowych urzadzen telekomunikacyjnych oraz
wzajemnego uznawania ich zgodnosci (dyrektywa R&TTE).
Pentru clientii din Europa
lnainte de a utiliza unitatea, va rugam sa cititi documentul separat R&TTE cu
masuri de precautie.
Pre zékaznl’kov v Europe
Pred spustenim tohto pristroja si precitajte osobitné opatrenia smernice R&TTE.
Za stranke v Evropi
Pred uporabo te naprave preberite Iocen dokument z varnostnimi ukrepi v zvezi
z R&TTE.
Za korisnike u Europi
Prije upotrebe ovog uredaja proéitajte dokument s R&TTE mjerama opreza.
This model has an RF module of the FCC/IC approval built-in.
BUILT IN MODULE RM-215
FCC-ID: AK8RM215
IC: 4OQB-RM215
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This transmitter must not be co—located or operated in conjunction with any
other antenna or transmitter.
For the customers in the U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1 ) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
For the customers in Canada
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1 ) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
The term ”IC:" before the radio certification number only signifies that Industry
Canada technical specifications were met.
This device operates on a no—protection no—interference basis. Should the user
seek to obtain protection from other radio services operating in the same TV
bands, a radio licence is required. Please consult Industry Canada’s document
CPC—2—1—28, Optional Licensing for Low—Power Radio Apparatus in the TV Bands,
for details.
Tiirkiye’deki mfisteriler icin
AEEE Yonetmeligine Uygundur
For the customers in the U.S.A.
SONY LIMITED WARRANTY — Please visit http://www.sony.com/psa/warranty
for important information and complete terms and conditions of Sony’s
limited warranty applicable to this product.
For the customers in Canada
SONY LIMITED WARRANTY — Please visit http://www.sonybiz.ca/pro/lang/en/
ca/article/resources»warranty—product—registration for important information
and complete terms and conditions of Sony’s limited warranty applicable to
this product.
For the customers in Europe
Sony Professional Solutions Europe — Standard Warranty and Exceptions on
Standard Warranty.
Please visit http://wwwprosony.eu/warranty for important information and
complete terms and conditions.
For the customers in Korea
SONY LIMITED WARRANTY — Please visit http://bpeng.sony.co.kr/handler/
BPAS—Start for important information and complete terms and conditions of
Sony’s limited warranty applicable to this product.
Precautions for Use
The life expectancy of the electrolytic capacitor is about 5 years under normal
operating temperatures and normal usage (8 hours per day; 25 days per month).
If usage exceeds the above normal usage frequency, the life expectancy may be
reduced correspondingly.
The DWT-POI N is a digital wireless transmitter for a UHF synthesized wireless
microphone system to be used for broadcast or movie production purpose. This
transmitter is suitable for Electronic News Gathering (ENG).
Using the CD-ROM manual
The manual can be read on a computer with Adobe Reader installed.
You can download Adobe Reader free from the Adobe website.
1 Open the index.html file in the CD—ROM.
2 Select and click on the manual that you want to read.
If you have lost or damaged the CD-ROM, you can purchase a new one from your
Sony dealer or Sony service counter.
Specifications
Transmitting section
Oscillator type Crystalecontrolled PLL synthesizer
RF power output 1 mW/10 mW/SO mW (e.r.p) selectable
Occupied RF bandwidth 192 kHz or less
Audio delay MODEl: 1.5 ms
MODE2: 1.0 ms
MODE3:2.1 ms
Allowable deviation of transmission frequency
:6.5 ppm
Type of emission G1 E or G1 D
Modulation method n/4 Shift QPSK
Audio section
Maximum input level MIC: —22 dBu (with 0 dB attenuator)
LINE: +24 dBu
Audio attenuator adjustment range (pad)
0 dB to 48 dB (3-dB steps, MIC input mode only)
Microphone input connector XLR—3—1 1C (female)
Input impedance 4.7 kohms or more
Frequency response 20 Hz to 22 kHz
T.H.D MODEi, MODE2: 0.03% or less
MODE3: 0.3% or less
0 dBu = 0.775 V
General
Operating voltage 3 V DC, with two LR6 (AA) alkaline batteries
Battery life Continuous operating time
5 hours (at 25 °C (77 °F), 10-mW output using Sony
LR6 (AA)-size alkaline batteries with CODEC
MODE set to MODE1 and the wireless remote
control function off and DIMMER MODE set to
AUTO OFF and +48V set to OFF)
0 °C to 50 °C (32 °F to 122 °F)
Storage temperature —20 “C to +60 °C (—4 °F to +140 °F)
Wireless remote control 2.4—GHz |EEE802.15.4 compliant
Dimensions (unit: mm (inches))
Operating temperature
II l
E: m
u; , a
or) (9“ A
: l‘l °°
© 6 e?
d—b <—
44 (1 3/4) 44 (1 3/4)
Mass Approx. 245 g (8.6 02) including batteries
Supplied accessories Spare battery case ( 1)
Soft case (1)
USB adapter cable (1)
Before Using this Unit (3)
CD-ROM (1)
Optional accessories Electret Condenser Microphones
ECM—673/9X
ECM—674/9X
ECM-678/9X
Design and specifications are subject to change without notice.
Notes
0 Always verify that the unit is operating properly before use. SONY WILL
NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS
OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
0 SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF
THIS UNIT OR MADE BY THIRD PARTIES.
0 SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION
OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
Printed on recycled paper.
http://www.sony.net/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : 0005004916
Create Date                     : 2016:11:01 09:28:57+09:00
Modify Date                     : 2016:11:01 09:31:14+09:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:11:01 09:31:14+09:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Format                          : application/pdf
Title                           : 2X.jpg
Creator                         : 0005004916
Document ID                     : uuid:d07e7b31-8abe-4cf7-837f-90779aeb6d52
Instance ID                     : uuid:d1247d8a-5489-4ec8-bfb5-c783313825c8
Page Count                      : 2

EXIF Metadata provided by EXIF.tools