Sony Group NASSV20I Network Audio System/Server User Manual NAS SV20i SV20Di

Sony Corporation Network Audio System/Server NAS SV20i SV20Di

User manual

NAS-SV20i/SV20Di 4-192-583-11(1)NAS-SV20i/SV20DiNetwork Audio System/ServerOperating InstructionsGetting startedEnjoying audio contentEnjoying Sony Multiple-Room ProductsAdditional informationTroubleshootingPrecautions/SpecificationsNetwork connections©2010 Sony Corporation Printed in China 4-192-583-11(1)

NAS-SV20i/SV20Di 4-192-583-11(1)2GBTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc.Do not place the naked flame sources such as lighted candles on the apparatus.To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like.The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off.The nameplate is located on the bottom exterior of the main unit (NAS-SV20i/SV20Di).For customers in the United StatesOwner’s RecordThe model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. Serial No. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.The following indications are located on the bottom exterior of the main unit (NAS-SV20i/SV20Di).Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined WARNING

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\020REG.fmmasterpage: Right_3colNAS-SV20i/SV20Di4-192-583-11(1)3GBby turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.Properly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals in order to meet FCC emission limits.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).For customers in CanadaProperly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals.Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).For customers in EuropeProperly shielded and grounded cables and connectors must be used for connection to host computers and / or peripherals.Notice for customers: the following information is only applicable to equipment sold in countries applying EU directives.The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For any service or guarantee matters, please refer to the addresses given in separate service or guarantee documents.Hereby, Sony Corp., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.For details, please access the following URL: http://www.compliance.sony.de/This product is intended to be used in the following countries:AT, BE, CH, CZ, DE, DK, ES, FI, FR, GB, GR, HU, IE, IT, NL, NO, PL, PT, RO, SE, SKFor customers who use this product in the following countries:Norway:Use of this radio equipment is not allowed in the geographical area within a radius of 20 km from the centre of Ny-Alesund, Svalbard in Norway.France:The WLAN feature of this Network Audio System/Server shall exclusively be used inside buildings.Any use of the WLAN feature of this Network Audio System/Server outside of the buildings is prohibited on the French territory. Please make sure that the WLAN feature of this Network Audio System/Server is disabled before any use outside of the buildings. (ART Decision 2002-1009 as amended by ART Decision 03-908, relating to radio-frequencies use restrictions.)Italy:Use of the RLAN network is governed:•with respect to private use, by the Legislative Decree of 1.8.2003, no. 259 (“Code of Electronic Communications”). In particular Article 104 indicates when the prior obtainment of a general authorization is required and Art. 105 indicates when free use is permitted;•with respect to the supply to the public of the RLAN access to telecom networks and services, by the Ministerial Decree 28.5.2003, as amended, and Art. 25 (general authorization for electronic communications networks and services) of the Code of electronic communications.010COV.book Page 3 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\020REG.fmmasterpage: Left_3colNAS-SV20i/SV20Di4-192-583-11(1)4GBDisposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems)This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems)This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste.On certain batteries this symbol might be used in combination with a chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources.In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only.To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.For all other batteries, please view the section on how to remove the battery from the product safely. Hand the battery over to the applicable collection point for the recycling of waste batteries.For more detailed information about recycling of this product or battery, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.010COV.book Page 4 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\030INT.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)5GBBefore operating this productAbout copyright protectionMusic data cannot be used without the permission of the copyright holder except when used solely for personal enjoyment. About the illustrations used in this manualIllustrations and screens used in this manual may vary from the actual screens.The model for the USA is basically used for the illustrations in this manual. However, the illustrations of a certain model which may have different features are used in this manual as well, to explain the feature.How to use this manualThis manual explains how to operate the unit mainly using the buttons on the remote control. Buttons on the main unit with the same or similar name as that on the remote control can be used to perform the same operations.About services that can be used in conjunction with an Internet connectionPlease note that Internet-based services are subject to change or termination without notice.Malfunctions that occur during the normal use of the unit will be repaired by Sony in accordance with the conditions defined in the limited warranty for this unit. However, Sony will not be liable for any consequences arising from a failure to play caused by a damaged or malfunctioning unit.010COV.book Page 5 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fmmasterpage: Left_L1_1colNAS-SV20i/SV20Di4-192-583-11(1)6GBTable of ContentsBefore operating this product ...................................................................5Features of this unit..................................................................................9Enjoying various music......................................................................9Using the unit with DLNA-compliant devices .........................................9Getting startedChecking the supplied accessories........................................................10Guide to parts and controls ....................................................................11Remote control...............................................................................11Main unit .......................................................................................13Display window ..............................................................................14Preparing the unit and the remote control...............................................15Connecting the antenna and the power cord .......................................15Inserting batteries into the remote control ...........................................16Using an iPod/iPhone ......................................................................16Basic operations ....................................................................................17Turning on this unit..........................................................................17Setting the network standby mode.....................................................18Selecting items with the unit .............................................................18Entering text...................................................................................19Performing initial setup operations.........................................................21Setting the clock.....................................................................................23Setting the clock through an Internet connection..................................23Network connectionsConnecting the unit to your home network (network settings) ................25Checking the wireless LAN environment of your home network..............26Searching for an access point and setting up a wireless network (access point scan).....................................................................26Setting up a wireless network using an access point compliant with WPS ........................................................................................28Setting up a wired network ...............................................................30Setting up the IP address/proxy server ...............................................31Confirming the network settings ........................................................32010COV.book Page 6 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fmmasterpage: Right_1colNAS-SV20i/SV20Di4-192-583-11(1)7GBEnjoying audio contentListening to an iPod or iPhone ............................................................... 33Selecting the operation mode ........................................................... 34Listening to DAB/DAB+ (available for the UK model only)......................36Performing a DAB/DAB+ Initial Scan ................................................. 36Tuning in a DAB/DAB+ station .......................................................... 36Presetting DAB/DAB+ stations ......................................................... 37Listening to audio content stored on a server .........................................38Setting up the server ....................................................................... 38Playing audio content stored on a server ............................................ 41Listening to music services....................................................................44Presetting stations .......................................................................... 45Enjoying a variety of music services .................................................. 45Listening to audio content from an external component (Audio In) ......... 47Listening to the playback sound of the unit with an external component (Audio Out)......................................................................................... 48Changing the play mode........................................................................49Searching for an item using a keyword................................................... 50Enjoying Sony Multiple-Room ProductsUsing the PARTY STREAMING function ...............................................51Starting a PARTY ........................................................................... 51Joining a PARTY ............................................................................ 52Connecting the unit with other DLNA-compliant devices........................ 53Playing audio content on the unit using a controller .............................. 54Streaming audio content to a renderer (network controlled player) using a controller................................................................................ 54Playing audio content streamed from a server (such as a computer) using a controller................................................................................ 55Additional informationSetting up the functions related to network operations ........................... 56Setting up access permission ........................................................... 56Using lists of permitted and non-permitted devices .............................. 56Using the SMART SELECT function .................................................. 57Setting the PARTY STREAMING function .......................................... 58Naming the unit .............................................................................. 58Changing the sound setting ................................................................... 59Generating a more dynamic sound (Dynamic Sound Generator X-tra) .... 59Selecting a sound style.................................................................... 59Turning the operating sound on or off................................................. 59010COV.book Page 7 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVTOC.fmmasterpage: Left_1colNAS-SV20i/SV20Di4-192-583-11(1)8GBUsing the timer.......................................................................................60Using the Sleep Timer .....................................................................60Using the Play Timer .......................................................................60Viewing the information of the unit..........................................................62Managing the system.............................................................................63Updating the system application........................................................63Formatting the system .....................................................................64TroubleshootingTroubleshooting.....................................................................................65Messages......................................................................................70Precautions/SpecificationsPrecautions ...........................................................................................72Specifications ........................................................................................73iPod/iPhone models that are compatible with this unit............................74The menu tree for the settings menu......................................................75Glossary ................................................................................................76Index......................................................................................................78010COV.book Page 8 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\040FEA.fmmasterpage: Right_L1_1colNAS-SV20i/SV20Di4-192-583-11(1)9GBFeatures of this unitEnjoying various musicYou can enjoy listening to music from sound sources with large amounts of music content.You can listen to your iPod or iPhone (page 33), play audio content stored on a server (such as your computer) (page 38), and play audio content streamed by music services via the Internet (page 44).Using the unit with DLNA-compliant devicesThis unit complies with the DLNA standard. You can listen to music in various ways using the unit together with other DLNA-compliant devices. Connecting it to other DLNA devices allows you to enjoy audio content stored on a server, or stream audio content to other devices, even though they are all placed in different rooms (page 53).Furthermore, the PARTY STREAMING function of the unit allows you to play back audio content with other devices that have a PARTY STREAMING function at the same time (page 51). You can use an iPod/iPhone placed on the unit, a server (a computer, etc.), music services, or an external device connected to the AUDIO IN jack of the unit as a sound source for the PARTY STREAMING function.About DLNADLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as music data, image data, etc.) over a home network.iPod/iPhoneMusic Services Home Network (server)The unit Audio InDAB/DAB+ (available for the UK model only)Audio streaming/PARTY STREAMINGThe unit010COV.book Page 9 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Left_L0NAS-SV20i/SV20Di4-192-583-11(1)10GBGetting startedChecking the supplied accessories❏Remote control (1)❏R6 (size AA) batteries (2)❏AC adaptor (1)❏Power cord (1)Models for the USA and CanadaModels for Europe (except for the UK model)Model for the UK❏iPod Dock Adapters (2)The adapter number qs or qg is shown on the bottom-rear of each Dock Adapter.When you use other iPod models, a compatible Dock Adapter from Apple Inc. will need to be purchased separately.❏DAB/DAB+ wire antenna (1) (for the UK model only)❏Operating Instructions (this manual) (1)This manual provides full explanations of the various settings, operations and the network connection procedure.This manual also contains precautions for the safe use of the unit.❏Quick Setup Guide (1)This manual explains how to set up the network connections and use the functions that can be used in conjunction with the network connections.If you find any accessories missing or damaged, please contact your nearest Sony dealer.qs: For iPhoneqg: For iPhone 3G and iPhone 3GS010COV.book Page 10 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)11GBGetting startedGuide to parts and controlsRemote controlASLEEP and TIMER buttons• SLEEP button (page 60)Use to set or confirm the sleep timer setting.• TIMER button (page 61)Use to set the timer.BNumeric*/text buttonsUse to select a track during playback or to enter text (pages 19, 27, 37, 45, 58).CMEMORY buttonUse to preset DAB/DAB+ stations (UK model only) (page 37) or stations of the music services (page 45).DALPHABET SEARCH buttonUse to search for an item using a keyword (page 50).EFUNCTION buttonUse to select a function (pages 18, 33).The unit has operating functions based on the sound source that the unit can play (iPod & iPhone function, Home Network function, etc.). Each press of this button changes the function in turn.FM/m/</,/ENTER buttonsUse to select an item (artist, album, track, menu item, etc.) and enter the selection (page 18, 19).•M and m buttons (page 18)Use to select an item that is listed on the display. Use to move the focus up or down.•< and , buttons (pages 19, 50)Use to move the focus while entering text. Use to select the previous match or the next match while searching for an item using a keyword.• ENTER button (page 18)Use to enter a selected item or setting.Press this button when an error message or a completion message is displayed, and the message will disappear.GBACK buttonUse to go back to the previous display (pages 18, 27, 34).010COV.book Page 11 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)12GBH./>, m/M buttons•. and > buttons (pages 34, 36)Use to find the beginning of the current, the previous, or the next track.Press and hold the button to find a point in a track when the iPod & iPhone function is selected.Use to select a preset DAB/DAB+ station, or the previous or the next DAB/DAB+ station in a service component list (UK model only).•m/M buttons (page 34)Use to find a point in a track.IiPod MENU buttonUse to display iPod/iPhone content lists, or use to go back to the previous iPod/iPhone content list (page 34).JDISPLAY buttonUse to display various information such as the time information of a track, an artist name, an album name, clock, etc. (page 34)K?/1 (power) buttonUse to turn the power on or off (page 17).LDIMMER buttonUse to change the brightness of the display. Each press of this button changes the brightness of the display to bright or dark.MVOLUME +*/– buttonUse to adjust the volume.NMUTING buttonUse to turn off the sound.ODSGX and SOUND EFFECT buttons• DSGX button (page 59)Use to generate more dynamic sound (Dynamic Sound Generator X-tra).• SOUND EFFECT button (page 59)Use to select a preset customized sound effect.PSETTINGS buttonUse to display the settings menu (pages 18, 26, 56). Use to enter clock, network, and other system settings.QOPTIONS buttonUse to display the options menu (pages 18, 27, 35, 57).Menu items will vary according to the selected function.RPARTY buttonUse to operate the PARTY STREAMING function (page 51).Press and hold the button for a few seconds to start or close a PARTY.SOperation buttons•X (pause) button•x (stop) button•N (play) button*TPLAY MODE buttonUse to select a play mode (page 49).* An asterisk (*) indicates buttons that have a tactile dot (number “5” button, VOLUME + button and N (play) button).010COV.book Page 12 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)13GBGetting startedMain unitARemote sensorB?/1 (power) button and the on/standby indicator•?/1 (power) button (page 17)Use to turn the power on or off.• On/standby indicator (page 17)The color indicates the power status of the unit.– Green: The unit is turned on.– Red: The “Network Standby” mode of the unit is set to “Off.”– Amber: The “Network Standby” mode of the unit is set to “On.”CDisplay windowFor details on the contents of the display, see “Display window” (page 14).DiPod/iPhone dockPlace an iPod or iPhone into the iPod/iPhone dock to listen to audio content stored on the iPod/iPhone (page 16).ETouch panel operation buttons•NX (play or pause) button•./> buttons (pages 34, 36)Use to find the beginning of the current, the previous, or the next track.Press and hold the button to find a point in a track.• TUNING +/– buttons (UK model only)Use to select a preset DAB/DAB+ station, or the previous or the next DAB/DAB+ station in a service component list.•V/v buttons (page 18)Use to select an item that is listed on the display. Use to move the focus up or down.• OPTIONS button (pages 18, 27, 35, 57)Use to display the options menu.Menu items will vary according to the selected function.• FUNCTION button (pages 18, 33)Use to select a function.• BACK button (pages 18, 27, 34)Use to go back to the previous display.• ENTER button (page 18)Use to enter a selected item or setting.FPARTY buttonUse to operate the PARTY STREAMING function (page 51).Press and hold the button for a few seconds to start or close a PARTY.GVOLUME +/– buttonUse to adjust the volume.010COV.book Page 13 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)14GBDisplay windowAFunction indicatorsLight up when a function is selected (pages 18, 33).BText informationDisplays various information such as track names, album names, artist names, clock, progress bar, etc.The following symbols appear on the display. The meaning of each symbol is as follows.C indicatorLights up when the playback range is set to “Current Folder” (factory setting) or “Parent Folder” while the unit is using the Home Network function (page 42).DPARTY indicatorLights up when the PARTY STREAMING function is active (page 51).EWireless LAN signal strength indicatorThis antenna icon indicates the strength of the wireless LAN signal. More segments indicate a stronger signal.tttFNX (play/pause) indicatorGTuner reception indicators (UK model only)Light up when the DAB/DAB+ function is active (page 36).HTimer indicatorsLight up when the Sleep Timer or Play Timer is set (page 60).IDSGX indicatorLights up when the DSGX function is set to “DSGX On” (page 59)JPlay mode indicatorsLight up when the play mode is set (page 49).Symbol Description/ The message is continued to/from the next/previous page. Press M/m to see the entire text.> There are selectable items after this item (for example, the menu has a deeper level).010COV.book Page 14 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)15GBGetting startedPreparing the unit and the remote controlConnecting the antenna and the power cordNoteIf you place the unit in an unstable location, it may move when you connect or disconnect cables. Hold the unit firmly when you connect or disconnect cables.1Connect the DAB/DAB+ wire antenna (aerial) to the ANTENNA DAB 75 : terminal (UK model only). Use an external DAB/DAB+ antenna for a more robust DAB/DAB+ signal. It is recommended you only use the supplied DAB/DAB+ wire antenna for areas of strong DAB/DAB+ reception or as a temporary measure until you install an optional external antenna.Use a 75 : coaxial cable with male F type connector to connect the unit to an external antenna.Be sure that the antenna is fully extended. To a wall outletDAB/DAB+ wire antenna (aerial)*WARNINGDO NOT plug the power cord into a wall outlet until all other connections have been made.* The DAB/DAB+ wire antenna (aerial) and the ANTENNA DAB 75 : are available for the UK model only.AC adaptorPower cord123DAB/DAB+ wire antenna (aerial)010COV.book Page 15 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)16GB2Connect the power cord to the AC adaptor.3Connect the AC adaptor to the unit, and then plug the power cord into a wall outlet. WARNING DO NOT plug the power cord into a wall outlet until other connections have been made.Inserting batteries into the remote controlRemove the battery compartment lid, and then insert the supplied R6 (size AA) batteries (Eend first) matching the polarities as shown below.When the remote control is no longer able to operate the unit, replace both batteries with new ones.Using an iPod/iPhoneInsert a dock adapter into the iPod/iPhone dock.When using an iPod model, use the dock adapter supplied with your iPod.When using an iPhone model, use the iPod Dock Adapter supplied with this unit. For details on the iPod Dock Adapters, refer to the operating manual supplied with the iPod Dock Adaptors.To remove the universal dock adapter for iPhone, pull it up with your fingernail or a flat object using the slot inside the adapter.Power cordAC adaptorTo the DC IN 19.5 V jack Power cordAC adaptorTo a wall outletUniversal dock adapter for iPhoneiPod/iPhone dock010COV.book Page 16 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)17GBGetting startedBasic operations This section explains the basic operations of the unit.Turning on this unit1Connect the power cord to a wall outlet.When you connect the power cord to a wall outlet, the unit turns on once and the on/standby indicator lights up in green. After a while, the unit turns off automatically and the on/standby indicator changes to red.2Press ?/1 (power).The unit turns on and the on/standby indicator lights up in green.When the unit is turned on for the first time after purchase, you are required to make the initial settings. If this is the case, see “Performing initial setup operations” (page 21).To turn off the unitPress ?/1 on either the remote control or the main unit. When the unit is turned off and enters the standby mode, the color of the on/standby indicator changes.The unit has two standby modes, network standby - off and network standby - on. For details, see “Setting the network standby mode” (page 18).•Network standby - off mode (factory setting)This standby mode consumes less power than network standby - on mode, though the unit takes more time to resume operations when powered on again. The on/standby indicator lights up in red in this mode.•Network standby - on modeIn this standby mode, the unit is always connected to the network and remains partially active to quickly resume operations when controlled over the network, or powered on again. In this mode, the on/standby indicator lights up in amber and the clock appears on the display. To set the network standby mode, see “Setting the network standby mode” (page 18).?/1 SETTINGSFUNCTIONBACK OPTIONSM/m/ENTER010COV.book Page 17 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)18GBSetting the network standby modeWhile the “Network Standby” mode is set to “On,” the unit can always be connected and controlled over the network.1Press SETTINGS to enter the settings menu.2Press M/m to select “Network Standby” and press ENTER.3Press M/m to select “Off” or “On” and press ENTER.( : Factory setting)Selecting items with the unitYou can use the M/m/ENTER buttons to select an item (menu item, artist, track, etc.) and enter the selection.1When a list of items (artists, tracks, menu items, etc.) is displayed, press M/m to select the desired item.The currently selected item is focused.Press and hold M/m to scroll the display.Press BACK to go back to the previous display.2Press ENTER.The selected item is set or the selected process is carried out.To select a functionThe unit has operating functions based on the sound source that the unit can play (iPod & iPhone function, Home Network function, etc.).Press FUNCTION repeatedly to select the desired function.About menus for this unitThis unit has two menus, the settings menu and the options menu, and they allow you to make various settings.•Settings menu (page 75)Press SETTINGS to display the settings menu. You can make various settings such as network settings, network standby settings, music services settings, etc. •Options menuPress OPTIONS to display the options menu. Menu items will vary according to the selected function.Display DescriptionOff The unit consumes less power than the network standby - on mode, though the unit takes more time to resume operations when powered on again. The on/standby indicator lights up in red.On The unit is connected to the network even though the power of the unit is turned off, and resumes operations when controlled over the network. The on/standby indicator lights up in amber.010COV.book Page 18 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)19GBGetting startedEntering textEntering text may be required during some setup operations such as network settings. You can enter text using the remote control.ANumeric/text buttonsPress the button with the desired letter (ABC, DEF, etc.). Press repeatedly until the desired letter appears.BCLEAR buttonPress this button to erase a letter that was just entered.CM/m/</,/ENTER buttons•M/m/</, buttonsUse these buttons to move the cursor.• ENTER buttonUse this button to enter a text string.D buttonPress this button so that the order of the characters which are assigned to a button appear in reverse. For example, pressing the no. 2 button repeatedly normally displays “A,” “B,” “C,” and “2,” however, pressing this button changes the order to “2,” “C,” “B,” and “A.”ECHARACTER buttonThis button selects the type of characters and numbers. Each time you press the button, the type of characters and numbers changes in the sequence “abc” (lowercase letters of the alphabet and numbers) t “ABC” (uppercase letters of the alphabet and numbers) t “123” (numbers only).If you want to enter punctuation marks (e.g., !, ?, etc.) and other symbols (e.g., #, %, etc.), select “abc” or “ABC.”Example of a character input displayThe display shown below is an example of the character input display that appears when you are searching for an item using a keyword.How to enter text1Press CHARACTER repeatedly to select the desired type (“abc,” “ABC,” or “123”).2Press the corresponding numeric/text button to enter the desired character, then press , to move the cursor to the next input position.Repeat this step to enter the text string.3Press ENTER to confirm and save the text string.Other operationsTo select the type of characters and numbersPress CHARACTER to select “abc,” “ABC,” or “123.”To Do the followingRestore the previous conditionPress BACK.Move the cursor Press </, to move the cursor left or right.Press M/m so that the cursor moves to the beginning or to the end of the text string.Current location of the cursor/number of characters you have enteredCursorA symbol that indicates the end of the text string currently being enteredType of characters and numbers010COV.book Page 19 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)20GBTo enter punctuation marks (e.g., !, ?, etc.) or symbols (e.g., #, %, etc.)Press 1 or 0 of the numeric/text button repeatedly while the type of characters is set to “abc” or “ABC.”To enter a spacePress 0 of the numeric/text button repeatedly while the type of characters is set to “abc” or “ABC.”To delete a characterPress CLEAR.Characters that are assigned to each numeric/text buttonThe table below shows the characters and numbers that you can enter for each type (“abc,” “ABC,” or “123”). You can check the characters, numbers, and symbols that are assigned to each numeric text button.Numeric/text buttonabc ABC 1231 . , ! @ ´ ` : ; ( ) [ ] { } < > 1. , ! @ ´ ` : ; ( ) [ ] { } < > 112a b c 2A B C 223d e f 3D E F 334g h i 4G H I 445j k l 5J K L 556 m n o 6 M N O 6 67p q r s 7P Q R S 778 t u v 8 T U V 8 89 w x y z 9 W X Y Z 9 90 / \ | - ~ = _ + # $ % & ^ “ * ? (space) 0/ \ | - ~ = _ + # $ % & ^ “ * ? (space) 00010COV.book Page 20 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)21GBGetting startedPerforming initial setup operationsWhen the unit is turned on for the first time after you purchase it, initial setup operations are required. The initial setup includes the initial setting procedure for the unit (this will be performed automatically), network settings, the clock settings, and obtaining a service list (for the Music Services function).When you are indicated to set the network or the clock, refer to the respective pages.Entering characters will be required during the setup operations. For details on entering characters, see “Entering text” (page 19).WARNINGDo not disconnect the power cord while the unit is making the initial setup operations. Doing so may cause the unit to malfunction.1Press ?/1 (power) to turn on the unit.2When “Set the items required to use this unit. Press ENTER to continue.” appears, press ENTER.3When the “Start setup?” display appears, select “OK.”The unit starts making the initial settings.4When the “Network Settings” display appears, select “Yes.”The “Connection” display appears.Before you start setting up a network, check the chart on page 25 to decide which connection method you will use to connect the unit to your home network. Then, refer to the respective page (as follows) to perform the setup operation for the connection method chosen.When you use a wireless connection•Access point search method:Go to step 3 of “Searching for an access point and setting up a wireless network (access point scan)” (page 27).•Manual connection method:Go to step 3 of “If you cannot find the desired network name (SSID) (manual setup method)” (page 28).•WPS push button configuration method:Go to step 3 of “Setting up a wireless network using the WPS push button configuration method” (page 28).•WPS PIN code method:Go to step 3 of “Setting up a wireless network using the WPS PIN code method” (page 29).When you use a wired connectionGo to step 4 of “Setting up a wired network” (page 30).Make sure that the network (LAN) cable has been connected to the NETWORK port on ?/1M/m/</,/ENTER010COV.book Page 21 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)22GBthe rear of the unit. See step 1 of “Setting up a wired network” (page 30), as well.When the network settings have been completed, the unit changes to the clock settings display.5When the “Date&Time” display appears, select “Auto” or “Manual.”For details on the clock settings, refer to the respective page (as follows) to set the clock.•When you select “Auto”:Go to step 5 of “Setting the clock through an Internet connection” (page 23).•When you select “Manual”:Go to step 5 of “To set the clock manually” (page 24).When the clock settings have been completed, the “Get Service List” display appears, allowing you to obtain a list of available music services.NoteIf you do not set up a network connection, you cannot set the clock by selecting “Auto” in this step.6When the “Get Service List” display appears, select “OK.”The unit obtains the service list for the Music Services function.NoteIf you do not set up a network connection, you cannot obtain the list of available music services.When the list is obtained, “Refreshed Service List.” appears, then the unit starts making the server and the renderer (network controlled player)* settings automatically. Wait until the unit finishes making the settings.* For details on the server and the renderer (network controlled player), see page 53.When the initial setup process has been completed, “Setup is complete.” appears on the display and the unit changes to the iPod & iPhone function automatically.To go back to the previous displayPress BACK when you need to go back to the previous display, such as when an error occurs during the setup operation.To cancel initial settingsPress FUNCTION. When “Cancel setup?” appears, select “Yes.”If you select “Yes” to cancel the initial setup process before it is completed, “Setup later?” appears. Select “Yes” or “No.” If you select “Yes,” the initial setup process is required again the next time you turn the unit on. 010COV.book Page 22 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)23GBGetting startedSetting the clockThe time on the clock must be set correctly for the proper operation of functions. The clock can be set either automatically by connecting the unit to the Internet, or manually using the remote control.Setting the clock through an Internet connectionYou can set the clock by connecting the unit to the NTP (Network Time Protocol) server on the Internet. Before using this function, make sure the network settings have already been made properly.1Press SETTINGS to enter the settings menu and select “Date&Time Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Date&Time Setting Method.”The “Date&Time” display appears.If you are performing the initial setup operation and indicated that you want to set the clock (page 22), this display appears.4Select “Auto.”5Select the city where the unit is being used from the “Time Zone” display.The “NTP Server” display appears.If the desired city does not appear in the “Time Zone,” select a city that is within the same time zone as the desired city.6Press ENTER.The unit will connect to the default server in step 7.If you want to use a different NTP server, erase “NtpServer” and enter the name or the IP address of the NTP server that you want to use, then press ENTER.For details on entering text, see “Entering text” (page 19).When you want to change the specified NTP server back to the default one, enter “NtpServer” in this step.7When “Set via Internet” appears, select “OK.”When the clock settings have been completed, “Save settings.” and the clock appear on the display.M/m/</,/ENTERSETTINGS010COV.book Page 23 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\050GET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)24GBA list of available time zonesThe following items appear in step 5. Select the city where the unit is being used.GMT+13 NukualofaGMT+12 AucklandGMT+11 NoumeaGMT+10 Sydney, Port MoresbyGMT+9:30 AdelaideGMT+9 Tokyo, SeoulGMT+8 Beijing, SingaporeGMT+7 Bangkok, JakartaGMT+6:30 YangonGMT+6 DhakaGMT+5:45 KathmanduGMT+5:30 New DelhiGMT+5 Karachi, Islamabad GMT+4:30 KabulGMT+4 Abu Dhabi, TbilisiGMT+3:30 TeheranGMT+3 Moscow, RiyadhGMT+2 Athens, HelsinkiGMT+1 Paris, BerlinGMT+0 London, LisbonGMT-1 AzoresGMT-2GMT-3 Sao Paulo, Buenos AiresGMT-3:30 St. John’sGMT-4 Halifax, SantiagoGMT-5 New York, TorontoGMT-6 Chicago, Mexico CityGMT-7 Denver, CalgaryGMT-8 Los Angeles, VancouverGMT-9 AnchorageGMT-10 Honolulu, PapeeteGMT-11 Pago PagoGMT-12To set the clock manuallyYou can set the clock manually using the remote control.1Press SETTINGS to enter the settings menu and select “Date&Time Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Date&Time Setting Method.”The “Date&Time” display appears.If you are performing the initial setup operation and indicated that you want to set the clock (page 22), this display appears.4Select “Manual.”5Set the date.Press </, to select the item to be set, and press M/m to adjust the value. When you finish setting the date, press ENTER.Models for the USA and Canada use the month/day/year style for the date format. Models for Europe use the day/month/year style for the date format.6Set the time.Repeat the same operation as that in step 5.Models for the USA and Canada use a 12-hour clock and models for Europe use a 24-hour clock.When you finish setting the time, press ENTER.When the clock settings have been completed, “Save settings.” and the clock appear on the display.Tips•You can set the time zone from the settings menu.Enter the settings menu and select “Date&Time Settings” - “Time Zone.” Select the time zone from the list. The time zone setting can be changed only when the clock has been set automatically using the NTP server (page 23).•You can set the daylight saving time setting.Enter the settings menu and select “Date&Time Settings” - “Daylight Saving.” Select “Standard” or “Daylight Saving.”010COV.book Page 24 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: Right_L0_1colNAS-SV20i/SV20Di4-192-583-11(1)25GBNetwork connectionsNetwork connectionsConnecting the unit to your home network (network settings)This section explains how to connect the unit to your home network. You can connect the unit to the network either through a wireless or a wired LAN. Check your connection method using the chart below.For details on which connection method your wireless LAN router/access point supports, refer to the operating manual of your wireless LAN router/access point.What the unit can do when connected to a network•The unit can play audio content stored on the server (a computer, etc.) on your home network (page 38).•The unit can play music services via the Internet (page 44).Which connection do you want to use, wireless or wired, to connect the unit to your home network?Wireless WiredDo you have a router or a modem with a router function?Yes NoDo you have a wireless LAN router/access point?Yes NoYou need a router.You need a wireless LAN router/access point.Are you going to use the WPS*1 setting to connect the unit to your home network?Yes NoUse the wired connection method (page 30).Use the access point scan method (page 26).Use the WPS PIN code method (page 29).Use the WPS push button configuration method (page 28).Use the manual setup method (page 27).*1WPS (Wi-Fi Protected Setup) is a standard created by the Wi-Fi Alliance allowing you to setup a wireless network easily and securely.*2You can use the manual setup method when you cannot find the desired access point using the access point scan method.Which connection method do you intend to use, the WPS push button configuration method or the WPS PIN code method?PIN codemethodPush buttonconfigurationmethod*2010COV.book Page 25 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)26GBChecking the wireless LAN environment of your home networkRead the following firstYou must have the following environment to use the Home Network, Music Services, and PARTY STREAMING functions. Confirm your environment in advance.❏A wireless LAN home network environment must be available. (Make sure that a wireless LAN router is used.)❏A device that can be used as a server (a computer, etc.) must be connected to your wireless LAN home network.*2❏Internet access must be available. (When you want to listen to music services or use an NTP server to set the clock.)*2For details on servers which are compatible with this unit, see page 38.There are several connection methods you can use to set up a wireless network: searching for an access point, using a WPS connecting method (either the push button configuration method or the PIN code method), or manual setting. Select the connection method that can be used for your home network using the chart on page 25.Notes•Make sure not to use the wireless LAN function in a place where medical equipment (such as a pacemaker) is used or the use of wireless communication is prohibited.•Before connecting to your home network, you need to prepare a wireless LAN router/access point. For details, refer to the operating manual of the device.•Depending on your home network environment, the wireless LAN router/access point may have been set up such that it cannot be connected using WPS, even though it is compatible with WPS. For details on whether your wireless LAN router/access point is compatible or not compatible with WPS, and on the setup of a WPS connection, refer to the operating manual of your wireless LAN router/access point.•You may encounter setup difficulties if the unit and the wireless LAN router/access point are located too far from each other. If you do, move the devices closer to each other.Searching for an access point and setting up a wireless network (access point scan)You can set up a wireless network by searching for the access point. Confirm you have the following information in advance as you will need it to set up the network with this connection method.❏The network name (SSID*1) that identifies your network.*2 (This will be needed in step 6.): ❏If your wireless home network is secured by encryption, the security key (WEP key, WPA/WPA2 key) for your network.*2 (This will be needed in step 7.): *1SSID (Service Set IDentifier) is a name that identifies a particular access point.*2This information should be available from a label on your wireless LAN router/access point, from the operating manual, from the person who set up your wireless network, or from the information provided by your Internet service provider.1Press SETTINGS to enter the settings menu and select “Network Settings.”Internet*1Wireless LAN router/access pointServerThe unit*1To listen to music services, you need an environment that allows you to access the Internet.010COV.book Page 26 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)27GBNetwork connections2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Connection Method.”The “Connection” display appears.If you are performing the initial setup operation and indicated that you want to set the network connection (page 21), this display appears.4Select “Wireless LAN.”5Select “Access Point Scan.”The unit automatically starts searching for access points and displays a list of network names (SSIDs) of available access points. The unit can display a maximum of 20 network names (SSIDs) on the list.6Select the network name (SSID) from the list.If the desired network name (SSID) does not appear on the display, or if a network name (SSID) cannot be detected, press BACK so that the unit returns to step 5, then perform step 5 again. If the network name (SSID) still does not appear or still cannot be detected, you can input the network name (SSID) manually. See “If you cannot find the desired network name (SSID) (manual setup method)” (page 27).7Enter the security key (WEP Key, WPA/WPA2 Key) of your network, and then press ENTER.For details on how to input characters, see “Entering text” (page 19).The security key appears as “*****”.NoteIf your network has not been secured by encryption (using the security key), the security key insertion display does not appear.8When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.It may take a while for the unit to complete the network settings.When the network settings have been completed, “Complete.” appears and lights up on the display.If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 22 and continue the initial setting process.9Make the server settings.To listen to audio content stored on the server through the network that have set up in this section, you need to set up your server (page 38).TipYou can view information on the access points when a list of network names (SSIDs) is displayed on step 5.Place the focus on the access point (network name (SSID)) for which you want to view the information and press OPTIONS. Select “Information” from the options menu. You can check “SSID” (network name), “Signal Strength,” and “Security Method” (WPA2, etc.) for the selected access point.If you cannot find the desired network name (SSID) (manual setup method)If the desired network name (SSID) does not appear in the list of network names (SSIDs), you can enter the network name (SSID) manually.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.010COV.book Page 27 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)28GBWhen “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Connection Method.”The “Connection” display appears.If you are performing the initial setup operation and indicated that you want to set the network connection (page 21), this display appears.4Select “Wireless LAN.”5Select “Manual Registration” - “Direct Input.”6Enter the network name (SSID), and then press ENTER.For details on how to input characters, see “Entering text” (page 19).7Select the security setting from the “Security Setting” display.You can select from “WPA/WPA2-PSK (AES),” “WPA/WPA2-PSK (TKIP),” “WEP,” or “None.”NoteIf you select “None,” the unit skips step 8 and goes to step 9.8Enter the security key (WEP Key, WPA/WPA2 Key) of your network, and then press ENTER.For details on how to input characters, see “Entering text” (page 19).The security key appears as “*****”.9When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.It may take a while for the unit to complete the network settings.When the network settings have been completed, “Complete.” appears and lights up on the display.If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 22 and continue the initial setting process.10Make the server settings.To listen to audio content stored on the server through the network that have set up in this section, you need to set up your server (page 38).Setting up a wireless network using an access point compliant with WPSYou can easily set up a wireless network using an access point compliant with WPS. WPS setting can be made either by the push-button configuration method or the PIN (Personal Identification Number) code method.What is WPS (Wi-Fi Protected Setup)?WPS is a standard created by the Wi-Fi Alliance allowing you to setup a wireless network easily and securely.Setting up a wireless network using the WPS push button configuration methodYou can easily set up a WPS wireless connection with one push of the designated button.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Connection Method.”The “Connection” display appears.If you are performing the initial setup operation and indicated that you want to set the network connection (page 21), this display appears.4Select “Wireless LAN.”5Select “WPS Push.”010COV.book Page 28 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)29GBNetwork connections6When the message that tells you to press the WPS button on the access point appears, press the WPS button on the access point for a few seconds, within two minutes.When the wireless LAN router/access point has been registered with the unit, “Access point registration is complete.” appears.It may take a while for the unit to complete the network settings.7When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.It may take a while for the unit to complete the network settings.When the network settings have been completed, “Complete.” appears and lights up on the display.If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 22 and continue the initial setting process.8Make the server settings.To listen to audio content stored on the server through the network that you have set up in this section, you need to set up your server (page 38).Setting up a wireless network using the WPS PIN code methodIf the access point supports the WPS PIN (Personal Identification Number) code connection, you can set up a WPS wireless connection by entering the unit’s PIN code into the wireless LAN router/access point.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Connection Method.”The “Connection” display appears.If you are performing the initial setup operation and indicated that you want to set the network connection (page 21), this display appears.4Select “Wireless LAN.”5Select “Manual Registration” - “WPS PIN.”The unit’s PIN code (8 digits) is displayed.Leave the PIN code displayed on the unit until the connection is completed. (A different PIN code will be displayed each time you perform this operation.)6Input the unit’s PIN code into the wireless LAN router/access point.For details on entering the PIN code, refer to the operating manual of the wireless LAN router/access point.7Press ENTER.“Exchanging WPS info...” appears on the display.When the wireless LAN router/access point has been registered with the unit, “Access point registration is complete.” appears.It may take a while for the unit to complete the network settings.8When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.It may take a while for the unit to complete the network settings.When the network settings have been completed, “Complete.” appears and lights up on the display.If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 22 and continue the initial setting process.9Make the server settings.To listen to audio content stored on the server through the network that you have set up in this section, you need to set up your server (page 38).WPS button on the wireless LAN router/access point010COV.book Page 29 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)30GBSetting up a wired networkRead the following firstYou need the following environment to use the Home Network, Music Services, and PARTY STREAMING functions. Confirm your environment in advance.❏A wired LAN home network environment must be available. (Make sure that a router is used.)❏A device that can be used as a server (a computer, etc.) must be connected to your wired LAN home network.*2❏Internet access must be available. (When you want to listen to music services or use an NTP server to set the clock.)*2For details on servers which are compatible with this unit, see page 38.Make sure to use a network (LAN) cable for a wired connection.1Connect the unit to a device that is connected to the server.The connection configuration depends on the environment of your home network.•When the server (a computer, etc.) is connected to a router or a hub:tIf an unused port is available on the router or on the hub, connect the unit to that port.tIf an unused port is not available on the router, add a hub and connect the server and the unit to the hub.•When a router is not used*:tAdd a router and connect the server device and the unit to the router.* For example, when a server (a computer, etc.) is connected directly to a modem which does not have a router function.2Press SETTINGS to enter the settings menu and select “Network Settings.”3When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.4Select “Connection Method.”The “Connection” display appears.If you are performing the initial setup operation and indicated that you want to set the network connection (page 21), this display appears.Internet*1RouterServerBack of the unit*1To listen to the music services, you need an environment that can access to the Internet.Back of the unitRouter, hub, etc.ServerNetwork (LAN) cableTo the NETWORK port010COV.book Page 30 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)31GBNetwork connections5Select “Wired LAN.”The unit automatically starts setting up the network connection.6When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.It may take a while for the unit to complete the network settings.When the network settings have been completed, “Complete.” appears.If you are making the initial settings, the “Date&Time” display, step 5 of “Performing initial setup operations,” appears. Go back to page 22 and continue the initial setting process.7Make the server settings.To listen to audio content stored on the server through the network that you have set up in this section, you need to set up your server (page 38).Setting up the IP address/proxy serverYou may have to use a fixed IP address and proxy server, depending on your home network settings, or the specifications of the Internet service provider.For details on the input values in the following procedures, refer to the operating manual of the respective device or the information provided by your Internet service provider.To use a fixed IP addressThe unit is set to obtain the IP address automatically as the factory setting, however, you can use a fixed IP address, depending on your network settings.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Tools” - “Advanced Settings.”4Select “IP Address Settings” - “Manual.”5Enter the values for “IP Address,” “Subnet Mask” and “Default Gateway.”When you press ENTER after you enter “Default Gateway,” the DNS server settings display appears.For details on how to input characters, see “Entering text” (page 19).6Enter the values for the “Primary DNS” setting.7When “Set Second. DNS?” appears, select “Yes.”If you do not have to set the secondary DNS server setting, select “No.”8Enter the values for the “Secondary DNS” setting, and then press ENTER.9When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.When the network settings have been completed, “Complete.” appears.TipIf you want to obtain the IP address automatically using DHCP, select “Auto” for the “IP Address Settings” in step 4. If you select “Auto” in step 4, the “DNS Settings” selection display appears afterwards. In this case, select “Auto” or “Manual” for “DNS Settings” and enter the respective values following the instructions that appear on the display. 010COV.book Page 31 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\060NET.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)32GBTo use a proxy serverIf you need to use a proxy server (for example, when you are instructed to use a proxy server by your Internet service provider), be sure to prepare the proxy address and the port number in advance.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Tools” - “Advanced Settings.”4Select “Proxy Settings” - “Use.”5Enter the values for “Proxy Address” and “Proxy Port.”When you enter the proxy address, press ENTER so that the “Proxy Port” display appears. Enter the proxy port number.For details on how to input characters, see “Entering text” (page 19).6When “Save settings and check connection. Press ENTER to continue.” appears, press ENTER.When the network settings have been completed, “Complete.” appears.Confirming the network settingsYou can confirm the network status and settings.1Press SETTINGS to enter the settings menu and select “Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Tools” - “Connection Diagnosis.”Connection status appears as “Result:.”4Select the item you want to check.You can select from “Connection Method,” “SSID*,” “Signal Strength*,” “Security Method*,” “IP Address” (“IP Address,” “Subnet Mask,” and “Default Gateway”), “DNS” (“Primary DNS” and “Secondary DNS”) and “Proxy Server” (“Address” and “Port”).* Appears only when a wireless network is being used.When an error has occurred, “!” appears next to the error item.010COV.book Page 32 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Right_L0NAS-SV20i/SV20Di4-192-583-11(1)33GBEnjoying audio contentEnjoying audio contentListening to an iPod or iPhoneYou can operate your iPod/iPhone with the remote control and listen to audio content stored on your iPod/iPhone. See “iPod/iPhone models that are compatible with this unit” (page 74) for iPod/iPhone models that can be connected to this unit.1Place the iPod or iPhone on the iPod/iPhone dock.2Press FUNCTION repeatedly to select the iPod & iPhone function.3Select a track by browsing through the various iPod/iPhone content lists on either the display of the unit or of the iPod/iPhone.•When “Remote UI Mode” is set to “Off”:Operate the iPod/iPhone directly, browsing the items on the iPod/iPhone display.•When “Remote UI Mode” is set to “On”:Operate the iPod/iPhone with the remote control of the unit or the main unit, browsing the items on the display of the unit.For details on “Remote UI Mode,” see page 34.Example: Selecting a track from “Playlists” when “Remote UI Mode” is set to “On”1Press M/m to select [Playlists] from the iPod/iPhone content list, and then press ENTER.If the iPod/iPhone content list is not displayed, press BACK repeatedly until the first level of the iPod/iPhone content list tree is displayed, then select the item.2Press M/m to select the desired playlist, and then press ENTER.Tracks in the selected playlist appear.3Press M/m to select the desired track, and then press ENTER.The selected track starts playback.TipIf “Network Standby” is set to “On,” the track that was playing when the unit was last turned off will start playing again when the unit is turned on again (only if the iPod/iPhone was not removed from the iPod/iPhone dock of the unit). The “Network Standby” mode is set to “Off” as the factory setting. To save the information on the last track played even when the unit is turned off, change the “Network Standby” mode to “On.” For details on the network standby mode setting, see page 18.FUNCTIONM/m/ENTERTrack nameArtist nameElapsed timeTrack number010COV.book Page 33 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)34GBNotes•The cover art and released year cannot be displayed on the unit.•The unit does not save the information on the last track played if one of the following operations is carried out.–The power cord is disconnected from the wall outlet.–The iPod/iPhone is removed from the unit.–The unit is turned off and enters the network standby - off mode.–The play mode was set to a mode other than “Normal” when the unit was last turned off.–“Remote UI Mode” is changed.Other operationsSelecting the operation modeThe unit has two operation modes for the iPod & iPhone function, remote UI mode - on and remote UI mode - off.•Remote UI mode - on:You can operate your iPod/iPhone with the buttons on the unit and the remote control. iPod/iPhone content lists are also displayed on the unit.With the remote UI mode - on state, a play mode that has been set on the iPod/iPhone will be in effect when it is placed on the iPod/iPhone dock of the unit. A play mode set while the iPod/iPhone is placed on this unit will also be in effect when the iPod/iPhone is removed from the iPod/iPhone dock.To Do the followingPause playback Press X. Press X or N to resume playback.Scroll up/down the iPod/iPhone content listsPress and hold M/m. When “Remote UI Mode” is set to “Off,” you can scroll up or down the iPod/iPhone content lists much like the Click Wheel operations or the drag up or down operations of the iPod/iPhone.When “Remote UI Mode” is set to “On,” the currently selected item number and the total number of items in a list appear on the display and you can scroll the iPod/iPhone content list rapidly.Choose the selected itemPress ENTER. You can choose the selected item much like the center button or the touch operation of the iPod/iPhone.Find the beginning of the previous/next trackPress ./>.Find a point in a trackPress and hold m/M (./> on the main unit) while playing, and release it at the desired point.Return to the previous menu or reselect a menu while playingPress BACK or iPod MENU. You can return to the previous menu or reselect a menu much like using the Menu button or the touch operation of the iPod/iPhone.To go back to the playback display, press OPTIONS and select “Now Playing” (only when “Remote UI Mode” is set to “On”).Adjust the volume Press VOLUME +/–.View the various information while the unit is selecting or playing a track (only when “Remote UI Mode” is set to “On”)Press DISPLAY repeatedly. You can view the artist name, the album name, and the clock sequentially.To Do the following010COV.book Page 34 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)35GBEnjoying audio content•Remote UI mode - off (factory setting):You can use the buttons and controls on your iPod/iPhone to operate it. You can also use some buttons on the unit and the remote control, but the iPod/iPhone content lists are not displayed on the unit.NoteYou cannot use the buttons and controls on your iPod/iPhone in the remote UI mode - on mode.To change the operation mode, do the following.1While the iPod & iPhone function is selected, press OPTIONS to enter the options menu.2Select “Remote UI Mode.”3Select “On” or “Off” ( ).( : Factory setting)To use the unit as a battery chargerYou can use the unit as a battery charger for an iPod/iPhone. The charging begins when the iPod/iPhone is placed on the iPod/iPhone dock. An iPod/iPhone can be charged when:•the unit is turned on.•the unit is turned off (in standby status) in the network standby - on mode.To stop charging the iPod/iPhoneRemove the iPod/iPhone from the unit.Notes•An iPod/iPhone cannot be charged when the unit is turned off (in standby status) and in the network standby - off mode. For details on the charging status, refer to the operating manual of your iPod/iPhone. Charging is possible while the power cord of the unit is connected to a wall outlet.•When placing or removing the iPod/iPhone, handle the iPod/iPhone at the same angle as that of the iPod/iPhone connector on the unit and do not twist or turn the iPod/iPhone to prevent connector damage.•Do not carry the unit with an iPod/iPhone set on the iPod/iPhone dock. Doing so may cause a malfunction.•When placing or removing the iPod/iPhone, brace the unit with one hand and take care not to press the controls of the iPod/iPhone by mistake.•To change the volume level, use the VOLUME +/– button on the unit or the remote control. The volume level does not change when adjusted on the iPod/iPhone.•The iPod/iPhone dock on the unit is designed for an iPod/iPhone only. You cannot connect any other portable audio players.•To use an iPod/iPhone, refer to the operating manual of your iPod/iPhone.•Sony cannot accept responsibility in the event that data recorded on the iPod/iPhone is lost or damaged when using an iPod/iPhone with this unit.•If the album shuffle mode is set on the iPod/iPhone, “SHUF” lights up to the display when you connect the iPod/iPhone on the unit. If the album shuffle repeat mode is set on the iPod/iPhone, “SHUF” and “REP” light up on the display. (Note that this happens only when “Remote UI Mode” is set to “On.”) For details on the play mode of the unit, see page 49.•When the album shuffle mode or album shuffle repeat mode is set on the iPod/iPhone, the unit does not shuffle tracks, but albums. If you want to shuffle tracks, set the play mode of the iPod/iPhone to shuffle or shuffle repeat mode.010COV.book Page 35 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)36GBListening to DAB/DAB+ (available for the UK model only)You can tune in DAB/DAB+ stations. Presetting stations in advance allows you to recall them by number.DAB/DAB+ stations can be received with the UK model only.Performing a DAB/DAB+ Initial ScanWhen you select the DAB/DAB+ function for the first time after purchase, the unit automatically starts a DAB/DAB+ Initial Scan and obtains a DAB/DAB+ service component list. However, you can perform a DAB/DAB+ Initial Scan manually.1Press FUNCTION repeatedly to select the DAB/DAB+ function.“DAB” lights up on the display.2When “Start Initial Scan? Press ENTER.” appears, press ENTER.The DAB/DAB+ Initial Scan starts. When scanning is completed, a service component list (a list of available DAB/DAB+ stations) is created.TipYou can perform the Initial Scan manually. Press OPTIONS and select “Initial Scan.” When “Start Initial Scan? Press ENTER.” appears, press ENTER.Notes•All preset stations that have been stored in the unit are cleared when you perform a DAB/DAB+ Initial Scan or when scanning is cancelled.•Before unplugging the DAB/DAB+ wire antenna (aerial), make sure the unit is turned off to preserve your own DAB/DAB+ settings.Tuning in a DAB/DAB+ station1Be sure that the DAB/DAB+ Initial Scan has been performed and a service component list has been created.2Press FUNCTION repeatedly to select the DAB/DAB+ function.“DAB” lights up on the display.3Press ./>.The unit tunes in to the previous or the next DAB/DAB+ station on the service component list.FUNCTIONM/m/ENTERMEMORY./>BACKDISPLAYChannel labelStation nameDLS (Dynamic Label Segment)010COV.book Page 36 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)37GBEnjoying audio contentPress DISPLAY repeatedly to view information such as ensemble label or frequency of the current station.Press BACK to return to the service component list.TipFor better broadcast reception, try changing the direction or location of the antenna (aerial). For example, position the antenna near or outside a window. If the reception does not improve, it is recommended that you connect an optional external antenna. Keep the DAB/DAB+ antenna away from the power cord, remote control, or AC adaptor, to avoid picking up noise.Notes•When tuning in a DAB/DAB+ station, it may take a few seconds before you hear any sound.•When tuning in a DAB/DAB+ station, primary service is automatically received when secondary service ends.Other operationsPresetting DAB/DAB+ stationsBy presetting DAB/DAB+ stations, you can easily reselect them by using the corresponding preset number. You can preset up to 20 DAB/DAB+ stations.1Tune in the desired DAB/DAB+ station.2Press MEMORY.A list of “Preset Memory” appears.3Press M/m to select a preset number.4Press ENTER.To preset another service, repeat the procedure from step 1.Tips•Secondary services can also be preset.•You can preset the station using the options menu. With the desired station tuned in, press OPTIONS and select “Preset Memory,” press M/m to select a preset number, and then press ENTER to enter the station. To listen to a preset DAB/DAB+ station1Press FUNCTION repeatedly to select the DAB/DAB+ function.The unit automatically starts playing the station that have received the last time.2Press BACK repeatedly until the “Tuning Mode” display appears.3Select “Preset,” then select the desired preset station.TipYou can press the numeric button that corresponds with the preset number to select the preset station directly.To Do the followingSelect different servicesPress ./> repeatedly to select the desired service.Press BACK to display the service component list, press M/m to select the desired service, and then press ENTER.Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly.Select the tuning modePress BACK repeatedly until the “Tuning Mode” display appears, and then select “All Services” or “Preset.”Go back to the DAB/DAB+ reception display from a list display.Press OPTIONS and select “Now Playing.”010COV.book Page 37 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)38GBListening to audio content stored on a serverThis unit can play audio content that is stored on a server device (such as a computer) that supports the DLNA (Digital Living Network Alliance) standards.To listen to audio content stored on a server•First of all, you need to connect the unit to your home network.tSee “Connecting the unit to your home network (network settings)” (page 25)•When you connect the unit to a home network, you need to set up the server.tSee “Setting up the server” (page 38)About DLNADLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as music data, image data, etc.) over a home network.Setting up the serverTo enjoy listening to audio content stored on your server with this unit, you must set up the server in advance.The following server devices are compatible with this unit.•Sony VAIO Media plus 2.0•Sony NAS-S500HDE, NAS-S55HDE* HDD Network Audio System•Microsoft Windows Media Player 12 installed on Windows 7 (page 38)•Microsoft Windows Media Player 11 installed on Windows Vista/XP (page 40)* These models may not be available in some countries/areas.If the server has a function that limits access from other devices, you must change the setting on the server to allow the unit to access the server.This section explains how to set up Windows Media Player when using it as a server.For details on the settings of other server devices, refer to the operating manuals or help of the respective devices or applications.xWhen using a computer equipped with Windows 7This section explains how to set up a manufacturer-installed version of Windows Media Player 12 for Windows 7 as a server to connect with this unit.For details on how to operate Windows Media Player 12, refer to the help of Windows Media Player 12.NoteThe items displayed on the computer may be different from the ones shown in this section, depending on the version of the operating system or the computer environment. For details, refer to the help of your operating system.010COV.book Page 38 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)39GBEnjoying audio content1Go to [Start] - [Control Panel].2Select [View network status and tasks] under [Network and Internet].The [Network and Sharing Center] window appears.TipIf the desired item does not appear in the computer display, try to change the display type used by the Control Panel.3Select [Public network] under [View your active networks].If it shows other than [Public network], go to step 6.The [Set Network Location] window appears.4Select [Home network] or [Work network] according to the environment in which the unit is being used.5Follow the instructions that appear on the computer display according to the environment in which the unit is being used.When the settings have been completed, confirm that the item under [View your active networks] has been changed to [Home network] or [Work network] in the [Network and Sharing Center] window.6Select [Change advanced sharing settings].7Select [Choose media streaming options...] from [Media streaming].8If [Media streaming is not turned on] appears in the Media streaming options window, select [Turn on media streaming].9Select [Allow All].The [Allow All Media Devices] window opens. If all the devices in the local network are set to [Allowed], select [OK] and close the window.10Select [Allow all computers and media devices].010COV.book Page 39 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)40GB11Select [OK] to close the window.12Connect the unit to the server.After you finish setting up Windows Media Player 12, refresh the server list of the unit and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 43).xWhen using a computer equipped with Windows Vista/Windows XPThis section explains how to set up Windows Media Player 11 installed on Windows Vista/Windows XP*, as a server to connect with this unit.For details on how to operate Windows Media Player 11, refer to the help of Windows Media Player 11.* Windows Media Player 11 is not manufacturer-installed on Windows XP. Access the Microsoft web site, download the installer, and then install Windows Media Player 11 on your computer.1Go to [Start] - [All Programs].2Select [Windows Media Player].Windows Media Player 11 starts up.3Select [Media Sharing...] from the [Library] menu.If you are using Windows XP, go to step 9.4When is displayed, select [Networking...].The [Network and Sharing Center] window appears.5Select [Customize].The [Set Network Location] window appears.6Add a check mark to [Private] and select [Next].7Confirm that the [Location] has been changed to [Private] and select [Close].8Confirm that [(Private network)] is displayed in the [Network and Sharing Center] window and close the window.9If a check is not added next to [Share my media] in the [Media Sharing] window that is displayed in step 3, add a check mark to [Share my media], then select [OK].A list of connectable devices is displayed.010COV.book Page 40 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)41GBEnjoying audio content10Select [Settings...] that appears beside [Share my media to...].11Add a check mark to [Allow new devices and computers automatically] and select [OK].NoteUncheck this item after you confirm that the unit can connect to the server and play audio data on the server in step 12.12Connect the unit to the server.After you finish setting up Windows Media Player 11, refresh the server list of the unit and select this server from the server list. For details on selecting a server, see “To refresh the server list” (page 43).Playing audio content stored on a serverThe unit can play audio content stored on the server in the MP3, LinearPCM, WMA, AAC* and HE-AAC formats. Audio content with copyright protection (Digital Rights Management) cannot be played by this unit.* The unit can play AAC files with the extension of “.m4a” only.1Press FUNCTION repeatedly to select the Home Network function.2Select the server to be connected.When the server list appears, press M/m to select the server.If the server list does not appear, follow the procedure outlined in “To refresh the server list” (page 43) to find the server.NoteEven if the power of the server device on the server list has been turned off, the unit turns the server on automatically if the server supports the Wake-on-LAN standard. If the server does not support the Wake-on-LAN standard, turn on the server in advance. For details on settings or operations of Wake-on-LAN of your server, refer to the operating manual or help of your server.3Select the item you want to play.The items that are displayed (tracks, artists, albums, genres, folder name, etc.) depend on the connected server.•Press M/m to select the item.•Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly.FUNCTIONM/m/ENTERBACK010COV.book Page 41 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)42GB•Press BACK to go to the next higher directory.•Press ENTER to go to the next lower directory.4Select the track you want to play and press ENTER.The unit starts playing the selected track and the playback display appears.Make sure that there is sound output from the speakers of the main unit.Tips•If you select a folder (such as an artist folder, genre folder, etc.) and press the N button, the unit plays all items in the selected folder.•The track on the server that was playing when the unit was last turned off will start playing again when the unit is turned on again (only if the power cord of the unit was not disconnected from the wall outlet).Notes•Tracks that the unit cannot play appear on the display as well. You cannot sort a list of playable tracks.Tracks that cannot be played on the unit are skipped during playback.•If you disconnect the power cord from the wall outlet, any information on the track on the server that was playing when the unit was last turned off will be erased.•It may take a while for the display to change while the unit is searching for an item in a folder that contains a large amount of audio content. When you search for an item in a folder that has large amount of audio content, you can search for an item using a keyword (page 50).Other operations*1If you change the playback range while the unit is playing a track, the playback will stop once when you select the playback range, then start playing the same track again from the beginning.*2When you set “Playback Range” to “Current Folder” or “Parent Folder,” the unit plays audio content as follows.•When you select “Current Folder,” the unit plays tracks in the current folder.•When you select “Parent Folder,” the unit plays:–tracks in the parent folder.–tracks in folders contained in the parent folder.The term “parent folder” used in this section means a folder one level higher in the structure tree than the folder that contains the currently selected item.*3You can view this information both when the unit is stopped and when it is playing a track, unless a list of items is displayed.To Do the followingPause playback Press X during playback. Press N to resume playback.Stop playback Press x.Find a point in a trackPress and hold m/M (./> on the main unit) during playback and release it at the desired point.Track nameArtist nameElapsed timeTrack (item) numberCodecGo to the beginning of the current track, previous track, or next trackPress ./> repeatedly.Reselect the item you want to playPress BACK repeatedly until the desired directory appears.Or press OPTIONS, select “To Server Top,” and then select the item. To go back to the playback display, press OPTIONS and select “Now Playing.”Change the playback range*1*2Press OPTIONS and select “Playback Range.” You can select the playback range from “Current Folder” (factory setting) or “Parent Folder.”When one of these playback range settings is selected, lights up on the display.Check the details of the selected item Press OPTIONS and select “Information.” You can see the detailed information of the selected item (content, folder, server, etc.).View various information while the playback display appears*3Press DISPLAY repeatedly. You can check the album name and the clock.To Do the following010COV.book Page 42 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)43GBEnjoying audio contentTo refresh the server listIf you cannot find the desired server in the server list (such as when you add a new server on the network but it does not appear on the server list, or when the server you normally use does not appear in the server list), refresh the server list.1Press FUNCTION repeatedly to select the Home Network function.If the unit automatically connects to the server that it was connected to the last time, press BACK repeatedly until the server list appears.2While the unit is displaying the server list, press OPTIONS to enter the options menu and select “Refresh.”“Scanning...” appears on the display and the unit searches for new servers. When the server list has been refreshed, a new server list appears.TipThe unit keeps a history of the last five connected servers and these servers appear under the servers that are currently activated in the server list.20 servers can be displayed in a server list. When the number of servers on the server list exceeds 20, the unit automatically deletes servers, starting from the oldest server. However, you can select and delete a server manually. To delete a server from the server listYou can delete non-operating or unrecognizable servers from the server list.1Select the server you want to delete from the server list.2Press OPTIONS to enter the options menu and select “Delete.”3Select “OK.”Notes•You cannot delete the server of which audio content is currently being played back by the unit. If you try to delete such a server, a message that requires you to stop playing the track appears on the display.•Even if you delete the server from the server list, the server will appear in the list again when the unit finds it on the network (such as when you refresh the server list).010COV.book Page 43 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)44GBListening to music servicesYou can listen to music services offered on the Internet with this unit (Music Services function). To use this function, the unit has to be connected to the network and the network has to be connected to the Internet. For details on setting up the network, see “Connecting the unit to your home network (network settings)” (page 25).Refer to the following URL for details and further information on Music Services.http://www.sony.net/audio/musicservicesThe following steps introduce how to select “vTuner” as an example of music services offered on the Internet.1Press FUNCTION repeatedly to select the Music Services function.A list of service providers that the unit can connect to appears.2Select “vTuner.”3Select the desired folder or station, then press ENTER.•Press M/m to select the item.•Press and hold M/m so that the currently selected item number and the total number of items in a list appear on the display and you can scroll the list rapidly.•Press ENTER to go to the next lower directory or to listen to the station.•Press BACK to go to the next higher directory.TipThe station that was playing when the unit is turned off will start playing again when the unit is turned on again (only if the power cord of the unit was not disconnected from the wall outlet).Notes•If “No Service” appears and you cannot obtain a list of service providers, press OPTIONS and select “Refresh Service List.”•If the unit is turned off and you disconnect the power cord from the wall outlet, information on the station that was playing when the unit was last turned off will be erased.Other operationsMusic ServicesFUNCTIONM/m/ENTERBACKMEMORYTo Do the followingChange the station or servicePress BACK to go back to the list of service providers and select the service again. To go back to the playback display again, press OPTIONS and select “Now Playing.”Use various functions while the unit is selecting or playing a station or servicePress OPTIONS. The item displayed may vary according to the selected item or directory.View various information while the unit is playing a station or servicePress DISPLAY repeatedly to view the artist name, album name, elapsed time, the clock, etc.010COV.book Page 44 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)45GBEnjoying audio contentTo refresh the service listIf the unit cannot find the music services, refresh the service list.1Press SETTINGS to enter the settings menu and select “Music Services Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Refresh Service List.”4Select “OK.”Presetting stationsBy presetting desired stations, you can easily reselect them by using the corresponding preset number. You can preset up to 20 stations.This operation can only be carried out when the unit is playing a station.1Play the desired station.2Press MEMORY.A list of “Preset Memory” appears.3Press M/m to select a preset number and press ENTER.4Repeat steps 1 to 3 to preset other stations.To listen to the preset station1Press FUNCTION repeatedly to select the Music Services function.The unit automatically start playing the station that have received the last time.2Press BACK repeatedly until the list of service providers appears.3Select “Preset,” then select the desired preset station.TipYou can use the numeric buttons to select the preset station. Press the numeric button that corresponds to the preset number and press ENTER to select the preset station directly.NoteThere may be some stations that cannot be preset, depending on the service providers. If you try to preset such a station, “Not Available” appears on the display.To delete the preset station1Select the station you want to delete from the list of preset stations.2Press OPTIONS to enter the options menu and select “Delete.”3Select “OK.”Enjoying a variety of music servicesYou can enjoy listening to the content of a wide variety of music services offered on the Internet. Refer to the following URL for information on music services and how to listen to them with this unit.Music Services Portalhttp://www.sony.net/audio/musicservices010COV.book Page 45 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)46GBTo check the registration codeYou may be required to enter the registration code of the unit when you enjoy a new music service.1Press SETTINGS to enter the settings menu and select “Music Services Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Registration Code.”The registration code of the unit appears on the display.010COV.book Page 46 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)47GBEnjoying audio contentListening to audio content from an external component (Audio In)You can listen to the playback sound from an external component (such as a portable music player, etc.) connected to the AUDIO IN jack on the unit.Use an audio connecting cable (optional) to connect the AUDIO IN jack on the unit and the audio output jack on the external component.Make sure the audio connecting cable is firmly inserted into both jacks. If not, noise may be generated in the sound output.1Press VOLUME – to turn the volume down to its lowest level.2Connect an external component to the AUDIO IN jack on the unit using an audio connecting cable.3Press FUNCTION repeatedly to select the AUDIO IN function.4Start playback of the connected component and adjust its volume.Playback sound is output from the speakers of this unit. For details on the operation of the connected component, refer to the operating manual of the connected component.To adjust the input levelIf the sound volume is too high or too low, you can change the input level on the unit according to the output level of the connected component.1While the AUDIO IN function is selected, press OPTIONS to enter the options menu and select “AUDIO IN Sensitivity.”2Select “Low(Line Out)” or “High(Headphone Out).”( : Factory setting)NoteWhen the volume from an external component is too low, set the input level to “High(Headphone Out).” When the volume is too high or the sound is distorted, set the input level to “Low(Line Out).” Use the volume adjustment control if the connected component has a volume adjustment function.AUDIO IN jackDisplay DescriptionLow(Line Out) When the unit is connected to the line out jack of the external component.High(Headphone Out)When the unit is connected to the headphone out jack of the external component.010COV.book Page 47 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)48GBListening to the playback sound of the unit with an external component (Audio Out)You can listen to the playback sound of the unit from an external component (such as an amplifier or other stereo system) connected to the AUDIO OUT jacks on the unit.Use an audio connecting cable (with two phone plugs) to connect the AUDIO OUT jacks on the unit and the audio input jack of the external component.Make sure the audio connecting cable is firmly inserted into the appropriate jacks. If not, noise may be generated in the sound output.1Select the desired sound source.2Turn the volume of the connected device down to its lowest level.3Connect the unit and an external component using an audio connecting cable.4Start playback on the unit, then turn up and adjust the volume of the connected device.The playback sound is output from the connected component.AUDIO OUT L/R jacks010COV.book Page 48 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)49GBEnjoying audio contentChanging the play modeYou can listen to tracks in random order (shuffle play) or one track repeatedly (repeat play). play mode can be changed with the iPod & iPhone function and the Home Network function only.Notes•The play mode that is set on the iPod/iPhone remains active after you place the iPod/iPhone on the unit. You can change the play mode with this unit. If you change the play mode on the unit, the play mode set on the unit remains active on the iPod/iPhone even after it is disconnected from the unit.•If the album shuffle mode is set on the iPod/iPhone, “SHUF” lights up on the display when you connect the iPod/iPhone to the unit. If the album shuffle repeat mode is set on the iPod/iPhone, “SHUF” and “REP” light up on the display. (Note that this happens only when “Remote UI Mode” is set to “On.”)•When the album shuffle mode or album shuffle repeat mode is set on the iPod/iPhone, the unit does not shuffle tracks, but albums. If you want to shuffle tracks, set the play mode of the iPod/iPhone to shuffle or shuffle repeat mode.1While the unit is stopped, press PLAY MODE repeatedly.The play mode and the play mode indicators change as follows.* Shuffle play is not available for the Home Network function.2Press N.Playback starts with the selected play mode.Play mode indicator** When the iPod & iPhone function is selected, the play mode indicators light up on the display only when “Remote UI Mode” is set to “On.”Play mode/indicatorDescriptionNormal/(none) The unit plays all tracks for the selected playback range (artist, album, etc.) in sequential order.Repeat/REP The unit plays all tracks for the selected playback range (artist, album, etc.) repeatedly.Repeat 1/REP 1 The unit plays the currently selected track repeatedly.Shuffle*/SHUF The unit plays the tracks for the selected playback range (artist, album, etc.) in random order.Shuffle Repeat/SHUF REPThe unit plays the tracks for the selected playback range (artist, album, etc.) in random order repeatedly.010COV.book Page 49 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\070AUD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)50GBSearching for an item using a keywordWhen a list of an item (such as an artist list, a track list, etc.) is displayed, you can enter a keyword to search for the desired item. This function can be used for the iPod & iPhone function*, the Home Network function, and the Music Services function.* The alphabet search function can be used only when the “Remote UI Mode” for the iPod & iPhone function is set to “On.”1When a list of an item (artist list, track list, etc.) is displayed, press ALPHABET SEARCH.The keyword input display appears.2Enter a keyword.Use the numeric/text buttons to enter a keyword. For details on entering characters, see “Entering text” (page 19).NoteEnter a keyword that will match the letters or a word at the beginning of the name or title of the item you want to search for. When the unit searches for an item, “The” at the beginning of a name and the following space will be ignored.3When you finish entering the keyword, press ENTER.“Searching…” appears on the display. When the unit finishes searching, an item that matches the keyword appears. If the item displayed is not the one you are searching for, press </, so that the display changes to the next item which matches the keyword.If “No Results” appears and there is no item that matches the keyword, press </, to try to find the item you are searching for.Press ALPHABET SEARCH again to go back to the keyword input display.4When you find the desired item, press ENTER.Playback starts.ALPHABETSEARCH M/m/</,/ENTERNumeric/text buttonsType of characters and numbersCurrent location of the cursor/number of characters you have enteredInput area010COV.book Page 50 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\080MLT.fmmasterpage: Right_L0NAS-SV20i/SV20Di4-192-583-11(1)51GBEnjoying Sony Multiple-Room ProductsEnjoying Sony Multiple-Room ProductsUsing the PARTY STREAMING functionYou can play back audio content that is being played back on this unit or on another device that has a PARTY STREAMING function at the same time, via your home network.While using the PARTY STREAMING function, the device that starts a PARTY and streams the audio content is called the “PARTY host,” and the device that joins a PARTY and plays the audio content streamed from the PARTY host is called a “PARTY guest.”Make sure that the “PARTY STREAMING” of the unit is set to “On” (page 58).You can enjoy the PARTY STREAMING function with other devices that have this PARTY STREAMING logo mark.Starting a PARTYYou can start a PARTY so that other devices which support the PARTY STREAMING function can play the same music even though they are in different rooms.1Make sure the PARTY guest devices are turned on and are in the status which allows them to join a PARTY.2Play the desired sound source.Audio content played by the iPod & iPhone, DAB/DAB+ (UK model only), Home Network, Music Services, or Audio In function can be streamed. 3Press and hold PARTY for a few seconds.The unit starts PARTY STREAMING.To close a PARTYPress and hold PARTY for a few seconds.TipIf the PARTY button is pressed on a device that has a PARTY STREAMING function while the unit is playing a track, the unit will start a PARTY as the PARTY host and the other device will join a PARTY as the PARTY guest.PARTY guestPARTY hostPARTY guestPARTY guestPARTY010COV.book Page 51 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\080MLT.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)52GBJoining a PARTYThe unit can join a PARTY which has been started by another device so that you can enjoy the same audio content as that being played in a different room.When another device (PARTY host) is having a PARTY, press PARTY.The unit joins the PARTY as a PARTY guest.To leave a PARTYPress PARTY.Tips•If the “Network Standby” mode of the unit is set to “On,” the unit turns on and joins the PARTY automatically when another device starts the PARTY.•You can check the PARTY host information. Press OPTIONS and select “PARTY Host Info.”Notes•You cannot join a PARTY in the following cases:–you have a PARTY on this unit.–you have already joined another PARTY.•If you press PARTY when no PARTY is being held, but a device that has a PARTY STREAMING function is playing, the device will be the PARTY host and the unit will join the PARTY as the PARTY guest.010COV.book Page 52 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\080MLT.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)53GBEnjoying Sony Multiple-Room ProductsConnecting the unit with other DLNA-compliant devicesThis unit complies with the DLNA standard. You can enjoy listening to music in various ways by connecting the unit to other DLNA-compliant devices over your home network.When using the unit together with other DLNA-compliant devices, the unit can perform three different roles, as a server, as a player, and as a renderer (network controlled player).About DLNADLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishes guidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digital content (such as music data, image data, etc.) over a home network.xServerThe unit can be accessed by a player and the audio content from the unit can be played back by the player. The unit can stream audio content to one player at a time.About the status of the unit and the sound sources for audio streamingWhen the unit is used as a server, audio content from an iPod/iPhone, an external component (Audio In), or DAB/DAB+ (UK model only) can be streamed to a player while the unit is turned on or is in the network standby - on mode status. Audio can be streamed from the unit to a player when the unit is playing audio content or is stopped while the Home Network or Music Services function is selected.Notes•Audio cannot be streamed from the unit while an iPod/iPhone is playing or the AUDIO IN or DAB/DAB+ function is selected.•The unit can stream audio content to one player at a time.xPlayerThe unit can access to a server and play the audio content stored on that server.For details on the operation of the unit as a player, see “Listening to audio content stored on a server” (page 38).The unit can access to one server at a time.NoteIf the server supports the Wake-on-LAN standard, the unit turns on the server automatically. It may be necessary to make the required settings so the server can be turned on via the network by Wake-on-LAN. For details on the settings required for Wake-on-LAN, refer to the operating manual of the server.xRenderer (network controlled player)When a DLNA-compliant controller operates the unit, the unit performs the role of a renderer (network controlled player). In this case, the controller sends the unit commands to access a server and play audio content stored on the server.This section explains how to enjoy music with DLNA-compliant devices on your home network, using some examples.Server (the unit) PlayerPlayer(the unit)ServerRenderer (network controlled player) (the unit)ControllerServerControlAccessDeliver010COV.book Page 53 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\080MLT.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)54GBNoteThe unit is set to allow all devices access to the unit automatically as the factory setting. You can select and register devices which can or cannot access this unit. For details, see “Setting up access permission” (page 56) and “Using lists of permitted and non-permitted devices” (page 56).Playing audio content on the unit using a controllerYou can use a DLNA controller to control the unit and to play audio content on the unit. To perform these operations, check the following first.•Check that all devices are connected to your home network and set up correctly.•Check that the unit is turned on or the unit is in the network standby - on mode.•Check that the controller has been added to the “Permitted Devices” list of the unit.•Check that the unit has been recognized and registered with the controller.Streaming audio content to a renderer (network controlled player) using a controllerYou can use a DLNA controller to control the unit to stream audio content to a renderer (network controlled player). Content from an iPod/iPhone, Audio In, or DAB/DAB+ (UK model only) can be streamed to a renderer (network controlled player). To perform these operations, check the following first.•Check that all devices are connected to your home network and set up correctly.•Check that the unit and the renderer (network controlled player) are turned on or the unit and the renderer (network controlled player) are in the network standby - on mode.•Check that the controller and the renderer (network controlled player) have been added to the “Permitted Devices” list of the unit.•Check that the unit and the renderer (network controlled player) have been recognized and registered with the controller.ControllerServer/renderer (network controlled player) (the unit)ControlControllerServer (the unit)ControlRenderer (network controlled player)DeliverAccess010COV.book Page 54 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\080MLT.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)55GBEnjoying Sony Multiple-Room ProductsPlaying audio content streamed from a server (such as a computer) using a controllerYou can use a DLNA controller to stream audio content stored on a server (such as a computer) to the unit.•Check that all devices are connected to your home network and set up correctly.•Check that the unit and the server are turned on or the unit and the server are in the network standby - on mode.•Check that the unit and the controller are allowed to access the server.•Check that the unit and the server have been recognized and registered with the controller.TipIf you use Windows 7 as a server, you can use the [Play To] function of Windows 7 to listen to the audio content stored on the computer.ControllerRenderer (network controlled player) (the unit)DeliverServerControlAccess010COV.book Page 55 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: Left_L0NAS-SV20i/SV20Di4-192-583-11(1)56GBAdditional informationSetting up the functions related to network operationsSetting up access permissionWhen a new device is added on the network and accesses the unit, you can select whether the unit adds the device to the list of permitted devices automatically or manually. (For details on the list of permitted devices, see “Using lists of permitted and non-permitted devices” on page 56.)1Press SETTINGS to enter the settings menu and select “Optional Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Access Permission Settings.”4Select “Auto” or “Manual.”( : Factory setting)NoteUp to 20 devices can be added to the list of “Permitted Devices” or “Pending Devices.” If 20 devices have already been registered, a new device cannot be added to either list. In this case, delete unnecessary devices or move devices from the lists (see “To edit a list” on page 57).Using lists of permitted and non-permitted devicesThe unit has two lists, a “Permitted Devices” list and a “Pending Devices” list, for the devices which are allowed to access the unit.•“Permitted Devices” list: Devices allowed to access the unit are on this list.When the unit is used as a server, player devices which are registered in this list can access the unit.•“Pending Devices” list: Devices not yet allowed to access the unit are on this list.SETTINGSM/m/ENTEROPTIONSDisplay DescriptionAuto When a new device accesses the unit, the unit automatically adds the device to the “Permitted Devices” list of the unit (page 56).Manual When a new device accesses the unit, the unit does not add the device to the list of permitted devices, but to the “Pending Devices” list of the unit (page 56).010COV.book Page 56 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)57GBAdditional informationAs “Access Permission Settings” is set to “Auto” (factory setting) (page 56), the unit adds new devices that have accessed the unit to the “Permitted Devices” list automatically. You can view each list and edit it. Up to 20 devices can be added to a list.NoteIf the server name cannot be found, “No Name” appears in the “Permitted Devices” list, the “Pending Devices” list, and “Model Name” for “Information” in the options menu.To view a list1Press SETTINGS to enter the settings menu and select “Optional Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Access Control.”4Select “Permitted Devices” or “Pending Devices.”To edit a listYou can view the details of the registered devices, and then delete them from the list.1While viewing either the “Permitted Devices” or “Pending Devices” list, select the device you want to edit.2Press OPTIONS to enter the options menu and select the desired item.When the options menu for the “Permitted Devices” list is displayed:When the options menu for the “Pending Devices” list is displayed:Using the SMART SELECT functionSetting “SMART SELECT ” to “On” allows the applicable Sony controller SMART SELECT to find the unit as the target component by using the infrared function.1Press SETTINGS to enter the settings menu and select “Optional Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.Display DescriptionInformation The “Model Name” and “MAC Address” of the selected device appear.Delete You can select from “Cancel” and “OK.” Select “OK” to delete the selected device.Delete All You can select from “Cancel” and “OK.” Select “OK” to delete all the devices on the list.Display DescriptionInformation The “Model Name” and “MAC Address” of the selected device appear.Move The selected device moves to the “Permitted Devices” list.Delete You can select from “Cancel” and “OK.” Select “OK” to delete the selected device.Delete All You can select from “Cancel” and “OK.” Select “OK” to delete all the devices on the list.Display Description010COV.book Page 57 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)58GB3Select “SMART SELECT.”4Select “On” ( ) or “Off.”( : Factory setting)Setting the PARTY STREAMING functionYou can set the unit to use the PARTY STREAMING function.1Press SETTINGS to enter the settings menu and select “Optional Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “PARTY STREAMING.”4Select “On” or “Off.”( : Factory setting)Naming the unitYou can name this unit so that the unit can be recognized by this name by other devices on the home network.1Press SETTINGS to enter the settings menu and select “Optional Network Settings.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “Device Name.”4Enter the name.For details on how to enter text, see “Entering text” (page 19).Display DescriptionOn The unit can be detected by other devices on the home network. The unit can start or close a PARTY, and join or leave a PARTY.Off The unit can be detected by other devices on the home network. However, the unit cannot start or join a PARTY.010COV.book Page 58 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)59GBAdditional informationChanging the sound settingGenerating a more dynamic sound (Dynamic Sound Generator X-tra)You can reinforce the bass and the treble to create a more powerful sound. This function is set to “DSGX On” as the factory setting.Press DSGX.Each time you press the button, the DSGX function switches between “DSGX On” and “DSGX Off.”Selecting a sound styleYou can select a sound style from five preset equalizer settings to match the genre of the music.Press SOUND EFFECT repeatedly.Each time you press the button, the sound style changes as follows.“Standard” ( ) t “Dynamic” t “Relax” t “Vivid” t “Live” t “Standard” t ...( : Factory setting)Turning the operating sound on or off The operating sound for the operation buttons on the main unit is set to “On” as the factory setting. You can turn this sound on or off.1Press SETTINGS to enter the settings menu and select “Touch Key Settings” - “Beep Settings.”2Select “On” ( ) or “Off.”( : Factory setting)SETTINGSM/m/ENTERSOUND EFFECTDSGX010COV.book Page 59 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)60GBUsing the timerUsing the Sleep TimerYou can set the Sleep Timer so that the unit enters standby mode automatically after a certain period of time (Sleep Timer function). This function operates even if the clock is not set.1Play the desired sound source.2Press SLEEP repeatedly.Each time you press the button, the time interval changes as follows.“SLEEP 15min” t “SLEEP 30min” t “SLEEP 60min” t “SLEEP 90min” t “SLEEP Off”( )( : Factory setting)The time interval display disappears if you do not operate the unit for 4 seconds, then the Sleep Timer is set.While the unit is processing the selected time interval, the SLEEP indicator flashes slowly on the display. It keeps flashing until the unit enters the standby mode.You can change the function (sound source, such as the iPod & iPhone function, the Home Network function, etc.) before the Sleep Timer turns the unit off.After the selected time elapses, the unit enters standby mode automatically.To check the remaining time before the Sleep Timer turns the unit offPress SLEEP so that the remaining time before the Sleep Timer turns the unit off appears on the display.TipIf you set both the Sleep Timer and Play Timer at the same time, the Sleep Timer takes priority.NoteIf you perform the following operations before the Sleep Timer turns the unit off, the Sleep Timer resets.•Disconnect the power cord.•Update the system of the unit.•Enter the settings menu and perform “All Reset.”Using the Play TimerYou can set the Play Timer to start playing an iPod/iPhone, a music service, or a DAB/DAB+ station (UK model only) at a specified time (Play Timer function). Make sure you have set the clock.1Prepare the sound source.Select the sound source (iPod/iPhone, Music Services, or DAB/DAB+), and then press VOLUME +/– to adjust the volume.TIMERM/m/</,/ENTERSLEEPVOLUME +/–?/1010COV.book Page 60 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)61GBAdditional information2Press TIMER.3When “TIMER Setting” appears, press ENTER.The “Start Time” setting display appears, and the “cPLAY” indicator starts flashing rapidly.4Set the starting time.Press M/m to change the hour and press ,. The cursor moves to the minute setting. Perform the same operation to set the minute.Press </, to move the cursor.Press and hold M/m to change the parameter sequentially.After you set the minute, press ENTER. The “End Time” setting display appears.5Set the ending time.Perform the same operation as that in step 4 to set the end time.6Select the source (“iPod & iPhone,” “MUSIC SERVICES,” or “DAB”*) you want to play.When the Play Timer is set, “Complete.” appears, and the “cPLAY” indicator lights up on the display.* UK model only7Press ?/1 to enter the standby mode.To go back to the previous displayPress BACK before you select the sound source in step 6.To cancel the timer settingWhile the Play Timer is set, press TIMER. When “TIMER Off” appears on the display, press ENTER.Notes•The Play Timer is erased if you format the system (page 64).•If the unit is already turned on at the preset starting time, the Play Timer will not be activated.•The Play Timer may not be activated depending on the status of the connected iPod/iPhone.•If you select the Music Services function as the sound source, the sound may not be output, depending on the service provider or the network environment.010COV.book Page 61 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: Left_L1NAS-SV20i/SV20Di4-192-583-11(1)62GBViewing the information of the unitYou can view the information of the unit.1Press SETTINGS to enter the settings menu and select “Device Details.”2Select the item you want to view.To go back to the previous displayPress BACK.Display DescriptionModel Name This is the name that is set for this unit and is displayed on the server.System Software You can view the firmware version of this unit.MAC Address(Wired LAN)You can check the MAC address for the wired network of the unit.MAC Address(Wireless LAN)You can check the MAC address for the wireless network of the unit.M/m/ENTERSETTINGS010COV.book Page 62 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: Right_L1NAS-SV20i/SV20Di4-192-583-11(1)63GBAdditional informationManaging the systemUpdating the system applicationBy downloading the latest version of the system application, you can take advantage of the newest functions. The unit accesses the Sony server to update the system.When a new update is available, you will be notified by a message that appears on the display while the unit is on and connected to the Internet.Make sure that the unit is stopped before updating the system.For details on system update available, refer to the customer support web site (page 65).Notes•Make sure not to turn off the unit or disconnect the network cable while the updating operation is in progress.•If you try to update the system when the Sleep Timer is on, it will be changed to “Off” automatically.1Press SETTINGS to enter the settings menu and select “System Update.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.The unit starts checking the available system update. 3When “Found latest update. Press ENTER.” appears, press ENTER.If the update is not available, “No update required.” appears.4When “System Update” display appears, select “OK.”A message that confirms whether or not you agree to the terms of the system update appears. Confirm the message and also read the “END-USER LICENSE AGREEMENT FOR SONY SOFTWARE” (page 80), and then select “Agree.”5Follow the display instructions.The unit starts to update the system application. It may take a while (about 20 minutes at the longest) for the unit to finish the update. The required time will depend on the amount of data in the updates, the line type of the network, the network communication environment, etc.When the system update finishes, the unit restarts automatically.To cancel the procedureSelect “Cancel” in step 4.M/m/ENTERSETTINGS010COV.book Page 63 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\090ADD.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)64GBTo go back to the previous displayPress BACK before the unit starts the system update. You cannot go back to the previous display after the update starts.Formatting the systemThis function formats the unit and restores it to the condition it was at the time of purchase. Note that this process deletes all settings and information (e.g., clock setting, network settings).1Press SETTINGS to enter the settings menu and select “All Reset.”2When “Playback and network functions cannot be used during the setup. Press ENTER to continue.” appears, press ENTER.When “ ” is displayed, the message is continued to the next page. Press m to see the entire text string.3Select “OK.”4When “Are you sure?” appears, select “OK.”Formatting starts.The unit automatically restarts at the end of the procedure. When the unit finishes formatting, the initial setup display appears.To cancel the procedureSelect “Cancel” in step 3 or 4.To go back to the previous displayPress BACK before you select “OK” in step 4.010COV.book Page 64 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: Right_L0NAS-SV20i/SV20Di4-192-583-11(1)65GBTroubleshootingTroubleshootingTroubleshootingIf a problem occurs while operating the unit, follow the steps described below before consulting your nearest Sony dealer. If an error message appears, it is recommended that you make a note of its contents for reference.1Check to see if the problem is listed in this “Troubleshooting” section.2Check the following customer support site.•For customers in the USA:http://www.esupport.sony.com/•For customers in Canada:English:http://www.sony.ca/ElectronicsSupport/French:http://fr.sony.ca/ElectronicsSupport/•For customers in Europe:http://support.sony-europe.com/You will find the latest support information and a FAQ at this web site.3If, after steps 1 and 2, you still cannot solve the problem, consult your nearest Sony dealer.If the problem persists after doing all of the above, consult your nearest Sony dealer.When bringing the product in for repairs, be sure to bring in the entire system (main unit, remote control, AC adaptor, and power cord).This product is a system product, and so the entire system is needed to determine the section requiring repair.How to reset the unitIt is usually unnecessary to reset this unit.However, on rare occasions, the unit enters an abnormal state and stops responding to button or on-screen operations. In this case, press and hold ?/1 (power) on the main unit for 10 seconds to reset the unit.,Connect the AC adaptor to the unit and the power cord to a wall outlet firmly (page 15).,The batteries in the remote control may be drained. Replace both batteries with new ones.,The unit’s internal system may be malfunctioning, or the unit may be suffering from strong electrical noise caused by power supply abnormalities due to being dropped, excessive static electricity, or lightning.In this case, reset the unit (page 65). If the problem still persists, disconnect the power cord from the wall outlet, wait about 60 seconds, and then reconnect it.,The unit’s internal system may be malfunctioning, or the unit may be suffering from strong electrical noise caused by power supply abnormalities due to being dropped, excessive static electricity, or lightning.In this case, reset the unit (page 65). If the problem still persists, disconnect the power cord from the wall outlet, wait about 60 seconds, and then reconnect it.,The ?/1 (power) button may not respond while the unit is still starting up.,The unit enters standby mode when you turn off the power. If you want to completely turn off the power, disconnect the power cord.If the on/standby indicator flashes in red or amberImmediately unplug the power cord, and check the following item.•Is the iPod/iPhone connector short-circuited?After the on/standby indicator stops flashing, reconnect the power cord, and turn on the unit. If the issue persists, contact your nearest Sony dealer.PowerThe unit does not turn on.The unit does not turn off.010COV.book Page 65 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)66GB,The on/standby indicator may not turn off immediately after you unplug the power cord. This is not a malfunction. The indicator will turn off after 30 seconds.,If the “Network Standby” mode is set to “On,” the clock is displayed when the unit is turned off.,The volume may be minimized. Press VOLUME +/– buttons to adjust the volume.,Check to make sure that the unit is not paused.,Check the connections of the device connected to the unit. Check to make sure the proper function is selected.,The specified station may have temporarily stopped broadcasting.,If you select the Music Services function as the sound source, the sound may not be output, depending on the service provider or the network environment.,Move the audio connecting cable away from any display, fluorescent light, or other electrical devices.,Move the unit away from any display or TV.,If plugs or jacks are dirty, wipe them with a cloth slightly moistened with alcohol.,Connect the unit to a different wall socket.,Install a noise filter (available separately) to the power cord.,Check the nature of the error. See “Messages” (page 70).,The network settings on the unit may be incorrect. Confirm the network status. Enter the settings menu and select “Network Settings” - “Tools” - “Connection Diagnosis” (page 32). For further information on the network connection, refer to the customer support site (page 65).,When the unit is connected via a wireless network, move the unit and the wireless LAN router/access point closer to each other and perform the setup again.,Check the settings of the router/wireless LAN router/access point and perform the setup again. For details on the settings of the devices, refer to the operating manual of the devices.,Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the unit away from these devices.,Make sure that the router/wireless LAN router/access point is turned on.,If you have reset the unit or have performed a system recovery on your server, make the network settings again (page 25).,Make sure the iPod/iPhone is connected securely.,Make sure the iPod/iPhone is connected securely.,Make sure the iPod/iPhone is playing music.,Adjust the volume.,Turn down the volume.,Set the sound style to “Standard” (page 59).,“Remote UI Mode” may be set to “Off.” When this item is set to “Off,” the iPod/iPhone content does not appear on the display. Enter the options menu of the iPod & iPhone function and set “Remote UI Mode” to “On” (page 34).,Make sure the iPod/iPhone is updated with the latest software. If not, update the iPod/iPhone before using it with the unit.,“Remote UI Mode” may be set to “Off.” When this item is set to “Off,” the iPod/iPhone content does not appear on the display. Enter the options menu of the iPod & iPhone function and set “Remote UI Mode” to “On” (page 34).The on/standby indicator remains lit after you unplug the power cord.The clock is displayed after you turn the unit off.Sound outputThere is no sound.There is severe humming or noise in the sound.Network connectionAn error message appears.The unit cannot connect to the network.iPod & iPhone“Insert iPod or iPhone” appears.There is no sound.The sound is distorted.The unit does not display the content stored on the connected iPod/iPhone.The remote control does not function.010COV.book Page 66 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)67GBTroubleshooting,Make sure the iPod/iPhone is connected securely.,You can use the unit as a battery charger for an iPod/iPhone when the unit is on or when “Network Standby” set to “On” (page 35). ,This may sometimes happen, depending on the iPod/iPhone model you are using.,This may sometimes happen, depending on the iPod/iPhone model you are using.,Connect the antenna (aerial) correctly (page 15).,Adjust the antenna position.,Keep the antenna away from the power cord and the AC adaptor to avoid picking up noise.,Turn off nearby electrical equipment.,Check the antenna connection, then perform the DAB/DAB+ Initial Scan procedure (page 36).,The current DAB/DAB+ station is not available. Select a different station (page 36).,If you have moved to another area, some stations/frequencies may have changed and you may not be able to tune into your usual broadcast. Perform the DAB/DAB+ Initial Scan procedure to retune the radio stations (page 36). (Performing this procedure clears all previously stored presets.),Depending on the security software used on the computer, the computer may not appear in the server list of the unit. For details, refer to the help of the security software.,You may have turned this unit on before you turned the server on. Enter the options menu and select “Refresh” in the server list display to refresh the server list (page 43).,Make sure that the router/wireless LAN router/access point is turned on.,Make sure that the server is turned on.,Confirm that the server has been set correctly (page 38). Confirm that the unit has been registered with the server and is set to allow music streaming from the server.,Confirm that the unit and the server are connected to the router/wireless LAN router/access point correctly. Enter the settings menu and select “Network Settings” - “Tools” - “Connection Diagnosis” (page 32). For further information on the network connection, refer to the customer support site (page 65).,The server may be unstable. Restart it.,If the ICF (Internet Connection Firewall) function is active on the computer, this may prevent the unit from connecting to the computer (only when your computer is used as a server). You may need to change the firewall settings to allow the unit to connect. (For details on changing the firewall settings, refer to the operating manual of your computer).,Shuffle repeat play is selected. Set the play mode to normal (page 49).,The bandwidth of your wireless LAN may be too low. Move the unit and the wireless LAN router/access point closer to each other, without any obstacles between them.,When you are using your computer as a server, the computer may be running many applications. If anti-virus software is active on the computer, temporarily disable that software as it needs large amounts of system resources.,Depending on the network environment or any radio interference, it may not be possible to play tracks with more than one device operating at one time. Turn off any other devices to enable the unit to play tracks.,You cannot play any files other than audio files.,Confirm that the server has been set correctly (page 38). Confirm that the unit has been registered with the server and is set to allow music streaming from the server.,Check to confirm whether the audio file on the server is damaged or erased. Refer to the operating manual of the server.The iPod/iPhone cannot be charged.“Remote UI Mode” is automatically set to “On” when an iPod/iPhone is connected to the iPod/iPhone dock of the unit.“Remote UI Mode” cannot be set to “Off.”DAB/DAB+ (UK model only)A DAB/DAB+ station cannot be received or there is a severe hum or other noise.A DAB/DAB+ station cannot be received.Home Network The server (such as a computer) does not appear in the server list. (“No Server” appears.)You cannot play audio data normally.The sound skips during playback.“Cannot Play” appears.010COV.book Page 67 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)68GB,You cannot play the following tracks:• A track that violates playback restrictions.• A track with irregular copyright information.• A track that you purchased at an online music store that does not allow home network streaming.• A track in a format not supported by the unit (page 41).,Confirm that the selected track has not been erased from the server. If the track has been erased, select another track.,Make sure that the router/wireless LAN router/access point is turned on.,Make sure that the server is turned on.,The server may be unstable. Restart it.,Confirm that the unit and the server are connected to the router/wireless LAN router/access point correctly.,If there are no tracks or folders in the selected folder, you cannot extend the folder to display its contents.,Depending on the WMA file format, you may not be able to play some tracks.,The track information may have been changed on the server. Reselect the server in the server list (page 41).,Stop playback and set the playback range (page 42) or the play mode (page 49).,If the playback range has been set to “one track” for some reason, you cannot change the playback range using “Playback Range” in the options menu. In this case, reselect some other item from the content list.,“Network Standby” may be set to “Off.” Turn on the unit or set “Network Standby” to “On” (page 18).,Confirm that the network is correctly set up. If it is not, the connection cannot be made (page 32).,The device has been added to the “Pending Devices” list. To add the device to the “Permitted Devices” list, select the device from the “Pending Devices” list, enter the options menu and then select “Move.” (page 57).,A maximum of 20 connectable devices have been set. Delete unnecessary devices from the “Permitted Devices” list, and then set “Access Permission Settings” to “Auto,” or move the device from “Pending Devices” to “Permitted Devices” (page 57).,Server operation of the unit is suspended if the unit is conducting one of the following operations.• Playing a track stored on the server (the unit is operating as a player)• Updating the system application• Formatting the system,The unit cannot stream audio content to multiple players. The unit can connect to only one player at a time.,Track information on the connected iPod/iPhone has been updated. For this reason, the player may sometimes be unable to obtain the correct track information. If this is the case, the information on the player device should be refreshed.,The unit itself does not support the Wake-on-LAN standard. Therefore the unit cannot be turned on by Wake-on-LAN when “Network Standby” is set to “Off.” Set “Network Standby” to “On” so that the unit can respond to operations by other devices via a network (page 18).,Audio streaming from the unit will depend on the function selected and the status of the unit. For details on audio streaming from the unit, see “About the status of the unit and the sound sources for audio streaming” (page 53).,You may not have performed DAB/DAB+ initial scan. Enter the options menu and select “Initial Scan” to obtain a service component list (page 36).,The PARTY host is playing a track of an audio format that cannot be played on the unit.,It may take a while before the playback sound is output.“No Content” appears.You cannot play a copyrighted WMA format track.You cannot select a previously selected track.The playback range or the play mode cannot be changed.The playback range cannot be changed.Devices on the network cannot connect to the unit.A player cannot play tracks on the iPod/iPhone placed on the unit.The unit cannot be turned on automatically when accessed by devices on the network.A player cannot receive audio content from the unit.The unit cannot stream DAB/DAB+ (UK model only).The unit cannot play the track that is currently being played by the PARTY host.010COV.book Page 68 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)69GBTroubleshooting,The PARTY feature is being used by several devices at the same time when the unit tries to join a PARTY, the unit may not be able to join the desired PARTY. Close all other instances of the PARTY feature except the desired one, then join the desired PARTY.,Make sure that the router/wireless LAN router/access point is turned on.,Confirm the network status. Enter the settings menu and select “Network Settings” - “Tools” - “Connection Diagnosis” (page 32). If an error occurs, an error number appears and “!” appears next to the error item.,When the unit is connected via a wireless network, move the unit and the wireless LAN router/access point closer to each other and perform the setup again.,If your contract with your Internet provider limits Internet connection to one device at a time, this device will not be able to access the Internet when another device is already connected. Consult your carrier or service provider.,The bandwidth of your wireless LAN may be too low. Move the unit and the wireless LAN router/access point closer to each other, without any obstacles between them.,If the clock on the unit has not been set, you cannot set the Play Timer. Set the clock before setting the Play Timer (page 23).,The ending time for the Play Timer cannot be the same as the starting time.,A power failure occurred while the timer setting was in standby mode or the power cord was disconnected.,The unit is being subjected to shocks or vibration. Place the unit in a stable location.,The unit may be under the influence of static electricity or other factors. In this case, restart the unit. If the unit still works poorly, reset the unit (page 65).,If a warning message appears, follow the instructions given by the message.,The unit’s internal system may be malfunctioning, or the unit may be suffering from strong electrical noise caused by power supply abnormalities due to being dropped, excessive static electricity, or lightning. In this case, disconnect the power cord, wait about 40 seconds, and then reconnect it.The unit has joined an unintended PARTY.Music ServicesYou cannot connect the unit to a service.The sound skips.Play Timer“Date&Time Error” appears.“Time Error” appears.Play Timer setting does not function when the starting time is reached. Play Timer setting does not end when the ending time is reached.OthersThe unit works poorly.The unit does not respond to any operations. The unit does not work correctly.010COV.book Page 69 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)70GBMessagesCommon messagesBrowse LimitYou tried to select the 11th level in a file tree while the unit can select down only to the 10th level.Cannot connect.[ Network settings ]The unit cannot connect to a network, or the unit cannot obtain the IP address because it cannot connect to the DHCP server for some reason (e.g., you input an incorrect WEP key). Check the network connection (page 32) or go to the network settings procedures and input the security key (WEP Key, WPA/WPA2 Key) again (page 25).[ Clock setting ]The unit cannot connect to the NTP server. Check that the NTP server address is correct.Cannot connect to server.The unit cannot connect to the server because the server may be turned off or the server may not be connected to a network. Turn on the power of the server or check if the server is connected to a network correctly.Cannot PlayYou tried to play audio content that the unit cannot play.Cannot Retrieve InfoThe unit cannot retrieve information from the server.The unit failed to obtain the registration code for the Music Services settings. Check the registration code again (page 46).Data ErrorThe selected audio content (data) has been damaged.No ContentThere is no content in the selected folder on the server.No PresetYou selected a preset number for which no station is assigned.No ResultsThere is no item that corresponds to the keyword used to search for that item.No ServiceThere is no service available. Perform DAB/DAB+ Initial Scan (page 36), or refresh the service list (page 45).Not AvailableThe operation that you performed is unavailable or invalid.Network settingsInput ErrorThe string of letters and numbers you have entered is not correct.Not found.The unit cannot find the access point.The same address is already set.You entered the same string of numbers both for the primary DNS server address and the secondary DNS server address.iPod/iPhoneCannot connect to deviceThe unit failed to connect to the iPod/iPhone.Insert iPod or iPhoneAn iPod/iPhone is not placed on the unit.This message may appear when the power of the connected iPod/iPhone is drained.Unsupported device connectedThe connected iPod is not supported by the unit.Home NetworkAccess denied.The unit is not allowed to connect to the server. Register the unit with the server.Cannot delete.The unit cannot delete a server from the server list or the “Permitted Devices” list.Cannot delete server. Stop Playback.You tried to delete a server while it is streaming audio content to the unit.010COV.book Page 70 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\100TRB.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)71GBTroubleshootingNo more can be added.You cannot add anymore items. (Appears when you try to add a server to a list.)No ServerThere is no server that the unit can connect to. Try refreshing the server list (page 43).Music ServicesCannot refresh Service List.The unit cannot refresh the service list for some reason (the unit is not connected to a network, etc.). Check the network connection (page 32).PARTYCannot receive PARTY data.The unit cannot obtain the audio content streamed by the PARTY host. Check the network connection (page 32). If the unit is connected to the network correctly, check the status of the PARTY host device.Enable PARTY STREAMING Setting.The unit is set to disable the PARTY STREAMING function. Set the “PARTY STREAMING” setting to “On” (page 58).No PARTY STREAMING.You tried to join a PARTY while there is no PARTY currently being hosted by other devices.PARTY not available.The unit has failed to start or join a PARTY as there are no devices that can join the PARTY.TimerDate&Time ErrorYou tried to select the timer without first setting the clock.Time ErrorThe ending time that you tried to set for the Play Timer is the same time as the starting time.System updateCannot download.The unit failed downloading the update data while performing the system update. Enter the settings menu and update the system again (page 63).Cannot update.The unit cannot update the system application. Contact your nearest Sony dealer.Download ErrorThe unit cannot download the update data. Reset the unit (page 65), then enter the settings menu and update the system again (page 63).OthersInternal ErrorAn internal error has occurred. Disconnect the power cord from the wall outlet, wait for a while, then reconnect it.Setup data errorThe data location that holds various settings has been initialized. Perform the setup operations again.Unexpected errorAn unexpected error has occurred. Perform the operation again. If the unit does not work correctly, reset the unit (page 65).010COV.book Page 71 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Left_L0_3colNAS-SV20i/SV20Di4-192-583-11(1)72GBPrecautions/SpecificationsPrecautionsOn safety•Completely disconnect the power cord (mains lead) from the wall socket (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself.•Should any solid object or liquid get into the unit, unplug the unit, and have it checked by qualified personnel before operating it again.•The AC adaptor and power cord can be changed only by a qualified service facility.On placement•Do not place the unit in an inclined position or in locations that are extremely hot, cold, dusty, dirty, humid, lacking adequate ventilation, subject to vibration, direct sunlight, or a bright light.•Be careful when placing the unit or speakers on surfaces that have been specially treated (for example, with wax, oil, polish) as staining or discoloration of the surface may result.•If the unit is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense inside of the unit, and cause the unit to malfunction. In this situation, leave the unit turned on for about an hour until the moisture evaporates.On heat buildup•Heat buildup on the unit during operation is normal and is not cause for alarm.•Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.About the AC adaptor•Use the AC adaptor supplied with this unit. Do not use any other AC adaptor since it may cause this unit to malfunction.•Connect the AC adaptor or the power cord to an easily accessible AC outlet. Should you notice an abnormality in the AC adaptor or the power cord, disconnect it from the AC outlet immediately.•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.•If you are not going to use this unit for a long time, be sure to disconnect the power supply. To remove the power cord from the wall outlet, grasp the adaptor plug itself; never pull the cord.About this unit•If you have connected to an outside network, such as the Internet, and have allowed access from other devices, unauthorized access by malicious outsiders can occur depending on your network configuration. It may cause damages such as data falsification. To avoid this problem, before using this unit, you need to:–Use a router and configure it correctly.–Register the equipment that is to access this unit.•It is prohibited to send or leave copyrighted products to/on an out-of-home network which can be accessed from many people without the author’s permission by the Copyright Act.•About DLNA support:This product is designed in accordance with DLNA Guideline v1.5. This product is commercialized to gain formal DLNA accreditation. This product may be upgraded to maintain interconnectivity.On the speaker systemThis speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the speakers far away from the TV. Do not drop this unit•Do not subject the unit to strong shocks. It may cause the unit to malfunction.•Do not exert strong pressure on the front side of this unit where the speakers are mounted.On volume adjustmentIf you raise the volume while listening to a segment containing only noise (as you might do in the case of a vinyl record), a sudden output of high-volume sound may cause damage to the speakers. Make sure to lower the volume before the start of playback.Consideration for othersKeep the volume at a moderate level out of consideration for your neighbors, especially at night.Cleaning the cabinet Clean this unit with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. Polarity of the plug010COV.book Page 72 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Right_L1_3colNAS-SV20i/SV20Di4-192-583-11(1)73GBPrecautions/SpecificationsSpecificationsWireless LAN sectionCompatible standards:IEEE 802.11 b/g (WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/WPA2-PSK (TKIP))Radio frequency:2.4 GHzDAB/DAB+ tuner section (UK model only)Tuner:DAB/DAB+ stereo tunerAntenna (aerial): DAB/DAB+ wire antennaFrequency range:Band-III: 174.928 (5A) MHz – 239.200 (13F) MHzDAB/DAB+ frequency table (Band-III):Inputs/OutputsDAB/DAB+ Antenna terminal (UK model only):75 : unbalancedAUDIO IN jack:Stereo mini jackVoltage: 1.0 VAUDIO OUT (L/R) jacks:RCA jacksVoltage: 2.0 ViPod/iPhone dock:Output voltage: DC 5.0 VThe maximum output current: 500 mANetwork port:10BASE-T/100BASE-TXGeneralPower requirements:AC adaptorInput: 100 - 240 V AC, 50/60 HzOutput: DC 19.5 V 2.0 APower consumption:XX W at the network standby - on mode0.5 W or lower at the network standby - off modeDimensions (w/h/d) (including projecting parts and controls):Approx. XXX mm × XXX mm × XXX mmMass:Approx. XX kgOperating temperature:+5 °C to +35 °C (+41 °F to +95 °F)Operating humidity:25% to 80%Supplied accessories:See page 10.Design and specifications are subject to change without notice.Frequency Label174.928 MHz 5A176.640 MHz 5B178.352 MHz 5C180.064 MHz 5D181.936 MHz 6A183.648 MHz 6B185.360 MHz 6C187.072 MHz 6D188.928 MHz 7A190.640 MHz 7B192.352 MHz 7C194.064 MHz 7D195.936 MHz 8A197.648 MHz 8B199.360 MHz 8C201.072 MHz 8D202.928 MHz 9A204.640 MHz 9B206.352 MHz 9C208.064 MHz 9D209.936 MHz 10A211.648 MHz 10B213.360 MHz 10C215.072 MHz 10D216.928 MHz 11A218.640 MHz 11B220.352 MHz 11C222.064 MHz 11D223.936 MHz 12A225.648 MHz 12B227.360 MHz 12C229.072 MHz 12D230.784 MHz 13A232.496 MHz 13B234.208 MHz 13C235.776 MHz 13D237.488 MHz 13E239.200 MHz 13FFrequency Label•Standby power consumption: 0.5 W•Halogenated flame retardants are not used in the certain printed wiring boards.010COV.book Page 73 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Left_L1_1colNAS-SV20i/SV20Di4-192-583-11(1)74GBiPod/iPhone models that are compatible with this unitYou can use the following iPod/iPhone models on this unit. Update your iPod/iPhone with the latest software before using it.iPhone 3GS iPhone 3G iPhone iPod nano 5th generation(video camera)iPod touch 2nd generationiPod classic iPod nano 4thgeneration(video)iPod touch 1st generationiPod nano 3rdgeneration(video)iPod nano 2ndgeneration(aluminum)iPod 5thgeneration(video)iPod nano 1stgeneration010COV.book Page 74 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Right_L1_1colNAS-SV20i/SV20Di4-192-583-11(1)75GBPrecautions/SpecificationsThe menu tree for the settings menuYou can set the various settings using the settings menu. The following menu tree shows an overview of the settings for the settings menu.SETTINGS Network Settings Connection Method Wired LAN (page 31)Wireless LAN Connection TypeAccess Point Scan (page 27)WPS Push (page 28)Manual RegistrationDirect Input (page 28)Tools Advanced Settings IP Address Settings (page 31)Proxy Settings (page 32)Connection Diagnosis (page 32)Network Standby (page 18)Music Services Settings Refresh Service List (page 45)Registration Code (page 46)Touch Key Settings Beep Settings (page 59)Date&Time Settings Date&Time Setting MethodManual (page 24)Auto (page 23)Time Zone (page 24)Daylight Saving (page 24)Optional Network Settings Access Permission Settings (page 56)Access Control Permitted Devices (page 57)Pending Devices (page 57)SMART SELECT (page 58)PARTY STREAMING (page 58)Device Name (page 58)All Reset (page 64)System Update (page 63)Device Details Model Name (page 62)System Software (page 62)MAC Address(Wired LAN) (page 62)WPS PIN (page 29)MAC Address(Wireless LAN) (page 62)010COV.book Page 75 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Left_L1_3colNAS-SV20i/SV20Di4-192-583-11(1)76GBGlossaryAACAbbreviation for Advanced Audio Coding. It is a standard for audio file compression determined by the MPEG (Motion Picture Experts Group), an ISO (International Organization for Standardization)/IEC (International Electrotechnical Commission) working group.Bit rateThe bit rate is a measure of data volume expressed in bits per second (bps).ByteOne of the fundamental units used to express digitized data in computers. Digitized data is commonly expressed in binary digits (zeros and ones). A single unit of data is one bit. One byte consists of eight bits.CondensationCondensation can occur in the unit when there is a rapid rise in temperature, as when a heater is turned on. If condensation occurs, keep the unit turned off until the moisture evaporates.DHCPAbbreviation for Dynamic Host Configuration Protocol. A system for automatically allocating configuration data required for an Internet connection.DLNAAbbreviation for Digital Living Network Alliance. The DLNA is a nonprofit organization that establishes design guidelines for digital content shared over networks.For details, see http://www.dlna.org/en/consumer/homeDNSAbbreviation for Domain Name System. A server that translates domain names to IP addresses, or IP addresses to domain names. A DNS is identified by an IP address. Also called a “DNS server.”HE-AACAbbreviation for High-Efficiency Advanced Audio Coding. Compare to AAC, it realizes high sound quality with low bit rate.Internet Service ProviderA company that offers a connection service to the Internet.IP addressIP addresses usually consist of four groups of up to three digits each, separated by a period (such as 192.168.239.1). All devices on a network must have an IP address.LANAbbreviation for Local Area Network.LAN is a general name for networks set up for communication among devices including computers, printers, and fax machines in relatively small areas such as offices or buildings.MAC addressAbbreviation for Media Access Control address. It is an identification name assigned to all network devices. Each device has its own address and there are no duplicate addresses. A MAC address may be necessary when identifying the unit separately from other devices (such as a DLNA server).MP3Abbreviation for MPEG-1 Audio Layer3. It is a standard for audio file compression determined by the MPEG (Motion Picture Experts Group), an ISO (International Organization for Standardization) working group. It enables compression of audio files to about 1/10 of the data size of a standard compact disc. Since the MP3 encoding algorithm is disclosed, there are various encoders/decoders that are compliant with this standard. The MP3 standard is therefore widely used in the computer field.Network key (security key)An encryption key used to limit the devices with which communication can occur. It is used to provide higher security for devices communicating via a wireless LAN router/access point.ProxyA program or a server that provides Internet access to computers within a firewall or quicker downloading of web pages.RouterA device that bridges networks, converting the protocols and addresses of each network. When connecting multiple network devices to the Internet, a router is necessary. The term “router” by itself may refer to any of these devices.SSIDAbbreviation for Service Set IDentifier. It is a name that identifies a particular access point within an IEEE 802.11 wireless LAN. To connect with an access point, a client device must be set with the same SSID. SSIDs can be up to 32 characters long. For higher security, a network key is normally also used. In this case, connection cannot occur unless the SSID matches the network key.010COV.book Page 76 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\110SPC.fmmasterpage: Right_3colNAS-SV20i/SV20Di4-192-583-11(1)77GBPrecautions/SpecificationsWEPAbbreviation for Wired Equivalent Privacy. An encryption key used in wireless LAN networks. As an IEEE standard based on RC4 algorithm cryptography, WEP is used to secure IEEE 802.11b wireless networks. During the transmission of a message between a wireless LAN access point and a client device, the sending side encrypts the data and the receiving side decrypts it. For communication to occur, both devices must use a common code key, which is called the “WEP key.” The encryption level is indicated by the bit count of the key; e.g., 64 bits or 128 bits. The higher the bit count, the higher the security level.WMAAbbreviation for Windows Media Audio. WMA is audio compression technology developed by Microsoft Corporation that allows audio files to be compressed to about 1/22 of the data size of a standard compact disc.WPAAbbreviation for Wi-Fi Protected Access. An encryption standard for wireless LAN networks created by the Wi-Fi Alliance to remedy a number of serious security problems in the WEP system. In addition to the network name (SSID) and encryption key (WEP), this protocol uses a user authentication framework called “EAP” (Extensible Authentication Protocol) and a protocol called “TKIP” (Temporal Key Integrity Protocol) which automatically updates the encryption code at regular intervals for higher security.WPA2Abbreviation for Wi-Fi Protected Access 2. An encryption standard for wireless LAN networks. As an upgraded version of WPA created by the Wi-Fi Alliance, this standard uses AES (Advanced Encryption Standard) cryptography to provide stronger security than WPA.WPSAbbreviation for Wi-Fi Protected Setup. A wireless network standard created by the Wi-Fi Alliance to allow you to set up a wireless network easily. A push button configuration method and a PIN code method are available.DAB/DAB+ (Digital Audio Broadcasting)-related terms (UK model only)Dynamic label segmentThe text data transmitted for each channel or service.Ensemble labelIn DAB/DAB+, multiple digital radio channels are transmitted using a single radio transmission or frequency. A group of channels sent this way is called an “ensemble” and “ensemble label” is the name of such a group.Service labelThe name of an individual digital radio channel or service.010COV.book Page 77 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVIX2.fmmasterpage: Left_L1_3colNAS-SV20i/SV20Di4-192-583-11(1)78GBPrecautions/SpecificationsIndexAAAC 76Access control 57Access Permission 56Access point 27Alphabet search 50Audio format 41Audio In 47Audio Out 48CClock 23Condensation 76Connecting the unit 15ConnectionsAC adaptor/power cord 15, 16Antenna (aerial) 15Audio In 47Audio Out 48DLNA 53Home network 25Universal dock adapters for iPhone 16Wired 30Wireless 26Controller 53DDAB/DAB+Initial Scan 36Listening 36Preset 37DAB/DAB+ wire antenna 10, 15Default gateway 31, 32DHCP 76DLNA 53, 76Player 53Renderer (network controlled player) 53Server 53DNS server 76DSGX 59EEditingPermitted/Pending devices list 57Server list 43FFeatures 9Fixed IP address 31Format 64Function 18HHome Network function 38Listening 41Optional network settings 56Server setting 38IInformation on the unit 62Initial setup 21Input level 47Internet 23, 44IP address 31, 76iPod/iPhone 16, 33Charging 35Compatible models 74Listening 33Operation mode 34Remote UI Mode 34Universal dock adapters 10, 16KKeyword 50MMAC address 57, 62, 76Manual settingAccess point 27IP address 31Proxy server 32Music Services 44Options menu 44Preset 45NName of the unitAdd 58Check 62Network name 26Network settings 25Confirm 32Connection method 25Optional settings 56Wired 30Wireless 26Network standby 17, 18OOn/standby indicatorAbnormal state 65Color 17, 18Operating sound 59Options menu 18PParts and controls 11PARTY STREAMING 51Join 52Optional setting 58Start 51Pending Devices list 56Permitted Devices list 56Play mode (repeat/shuffle) 49Play Timer 60Precautions 72PresetDAB/DAB+ 37Music services 45Proxy server 32, 76RRegistration code 46Remote control 11Remote UI Mode 34SSecurity key 26, 76010COV.book Page 78 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\010COVIX2.fmmasterpage: Right_3colNAS-SV20i/SV20Di4-192-583-11(1)79GBPrecautions/SpecificationsServer 31, 38Audio format 41Delete 43List 43Listening 41Refresh 43Windows 7 38Windows Vista/XP 40Server listDelete 43Refresh 43SettingsAccess permission 56Clock 23Initial setup 21Network connection 25Optional network settings 56Server 38Sound 59Timer 60Windows 7 38Windows Vista/XP 40Settings menu 18Sleep Timer 60SMART SELECT 57SOUND EFFECT 59Sound sources that can be streamed from the unit 53SSID 26, 76Standby mode 17, 18Subnet mask 31, 32Supplied accessories 10Support site 65System applicationChecking the firmware version 62Update 63System information 62TText input 19Timer 60Play Timer 60Sleep Timer 60Troubleshooting 65Tuning mode 37WWake-on-LAN 41, 53WEP 77Windows Media Player 11 40Windows Media Player 12 38Wired network 30Wireless LAN signal strength 14Wireless network 26Search 26WMA 77WPA 77, 94WPA2 77WPS 28, 77PIN code 29Push button 28010COV.book Page 79 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)80GBEND-USER LICENSE AGREEMENT FOR SONY SOFTWAREYou should carefully read the following agreement before using the SONY SOFTWARE (defined below). Using the SONY SOFTWARE indicates your acceptance of the agreement. If you do not agree with it, you are not authorized to use the SONY SOFTWARE.IMPORTANT - READ CAREFULLY: This End-User License Agreement (“EULA”) is a legal agreement between you and Sony Corporation (“SONY”), the manufacturer of your Sony hardware device (the “PRODUCT”) and the licensor of the SONY SOFTWARE. All Sony software and third party software (other than such software subject to its own separate license) included with your PRODUCT and any updates and upgrades thereto shall be referred to herein as the “SONY SOFTWARE”. You may use the SONY SOFTWARE only with the PRODUCT.By using the SONY SOFTWARE, you agree to be bound by the terms of this EULA. If you do not agree to the terms of this EULA, SONY is unwilling to license the SONY SOFTWARE to you. In such event, you should not use the SONY SOFTWARE.SONY SOFTWARE LICENSEThe SONY SOFTWARE is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SONY SOFTWARE is licensed, not sold.GRANT OF LICENSEAll title, copyright and other rights in and to the SONY SOFTWARE are owned by SONY or its licensors. This EULA grants you the right to use the SONY SOFTWARE for personal use only. DESCRIPTION OF REQUIREMENTS, RESTRICTIONS, RIGHTS AND LIMITATIONSLimitations. You may not copy, modify, reverse engineer, decompile or disassemble the SONY SOFTWARE in whole or in part.Separation of Components. The SONY SOFTWARE is licensed as a single product. Its component parts may not be separated.Use on Single PRODUCT. The SONY SOFTWARE may only be used with a single PRODUCT.Rental. You may not rent or lease the SONY SOFTWARE.Software Transfer. You may permanently transfer all of your rights under this EULA only when the SONY SOFTWARE is transferred together with and as part of the PRODUCT, provided that you retain no copies, transfer all of the SONY SOFTWARE (including but not limited to all copies, component parts, media, instruction manuals, other printed materials, electronic documents, recovery disks and this EULA) and the recipient agrees to the terms of this EULA.Termination. Without prejudice to any other rights, SONY may terminate this EULA if you fail to comply with the terms of this EULA. In such event, when requested by SONY, you must send the PRODUCT to an address designated by SONY, and SONY will send back the PRODUCT to you as soon as practicable after the SONY SOFTWARE has been deleted from the PRODUCT.Confidentiality. You agree to keep confidential information contained in SONY SOFTWARE which is not publicly known and not to disclose such information to others without SONY’s prior written approval.HIGH RISK ACTIVITIESThe SONY SOFTWARE is not fault-tolerant and is not designed, manufactured or intended for use or resale as on-line control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines or weapons systems, in which the failure of the SONY SOFTWARE could lead to death, personal injury or severe physical or environmental damage (“High Risk Activities”). SONY and its suppliers specifically disclaim any express or implied warranty of fitness for High Risk Activities.EXCLUSION OF WARRANTY ON SONY SOFTWAREYou expressly acknowledge and agree that use of the SONY SOFTWARE is at your sole risk. The SONY SOFTWARE is provided “AS IS” and without warranty of any kind, and SONY, its vendors and SONY’s licensors (for purposes of this SECTION only, collectively, “SONY”) EXPRESSLY DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SONY DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SONY SOFTWARE ARE FREE FROM ERRORS OR BUGS OR WILL MEET YOUR REQUIREMENT, AND SONY DOES NOT WARRANT THAT THE OPERATION OF THE SONY SOFTWARE WILL BE CORRECTED. FURTHERMORE, SONY DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SONY SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SONY OR A 010COV.book Page 80 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)81GBSONY AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, IN WHICH CASE THE ABOVE EXCLUSION WOULD NOT APPLY TO YOU.Without limiting any of the foregoing, it is specifically provided that the SONY SOFTWARE is not designed or intended for use on any product other than the PRODUCT. SONY provides no warranty that any product, software, content or data created by you or a third party will not be damaged by the SONY SOFTWARE. LIMITATION OF LIABILITYSONY, ITS SUPPLIERS AND SONY’S LICENSOR’S (for purposes of this SECTION ONLY, collectively, “SONY”) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RELATING TO THE SONY SOFTWARE ARISING FROM OR BASED ON BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWN TIME AND USER’S TIME, REGARDLESS OF WHETHER SONY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, SONY’S ENTIRE LIABILITY TO YOU UNDER ANY PROVISION OF THIS EULA SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID ALLOCABLE TO THE SONY SOFTWARE.EXPORTSIf you use or transfer the SONY SOFTWARE in or to a country other than your country of residence, you shall comply with applicable laws and regulations relating to exports, imports and customs. GOVERNING LAWThis EULA shall be construed, governed, interpreted and applied in accordance with the laws of Japan, without regards to any conflict of laws provisions. Any dispute arising out of this EULA shall be subject to the exclusive venue and jurisdiction of the courts in Tokyo, Japan, and you and SONY hereby consent to the venue and jurisdiction of such courts. YOU AND SONY WAIVE THE RIGHT TO TRIAL BY JURY WITH RESPECT TO ANY MATTERS ARISING UNDER OR RELATING TO THIS EULA.SEVERABILITYIf any part of this EULA is held invalid or unenforceable, other parts will remain valid.Should you have any questions in connection with this EULA or the limited warranty provided hereunder, you may contact SONY by writing to SONY at the designated contact address mentioned in the warranty card included in the product package.010COV.book Page 81 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)82GBImportant information on softwareIncluded with this product are software applications for which permission for use has been obtained either directly or indirectly by Sony Corporation (hereafter Sony) through a third party. Make sure to read this important information regarding these software applications.Information on GNU GPL- and GNU LGPL-compatible softwareIncluded with this product are the following software applications (refer to the following “Package List”) that are compatible with GNU General Public License (hereafter GPL) or GNU Lesser General Public License (hereafter LGPL). Users have the right to obtain, modify and redistribute the source code of these software applications in accordance with the attached GPL and LGPL.Package listalsa-libalsa-utilsbusyboxdosfstoolse2fsprogsfreetypeglibclibcaplibgcclibusblinuxnetbasenfs-utilsprocpspumputil-linuxwireless-toolsThe source code for these applications is provided by Sony at the following web site. Please go to this web site to obtain the source code.http://www.sony.net/Products/Linux/Please do not make direct enquiries regarding the source code contents.010COV.book Page 82 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)83GBGNU GENERAL PUBLIC LICENSEVersion 2, June 1991Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USAEveryone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.PreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.The precise terms and conditions for copying, distribution and modification follow.TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that 010COV.book Page 83 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)84GByou provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein.You are not responsible for enforcing compliance by third parties to this License.7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he 010COV.book Page 84 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)85GBor she is willing to distribute software through any other system and a licensee cannot impose that choice.This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.NO WARRANTY 11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONS How to Apply These Terms to Your New ProgramsIf you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.Copyright (C)This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USAAlso add information on how to contact you by electronic and paper mail.If the program is interactive, make it output a short notice like this when it starts in an interactive mode:Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for details. The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public 010COV.book Page 85 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)86GBLicense. Of course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouse-clicks or menu items--whatever suits your program.You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the names:Yoyodyne, Inc., hereby disclaims all copyright interest in the program `Gnomovision’ (which makes passes at compilers) written by James Hacker.<signature of TyCoon>, 1 April 1989 Ty Coon, President of ViceThis General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library.To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the 010COV.book Page 86 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)87GBrecipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”. A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.) ”Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library.b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. 010COV.book Page 87 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)88GBc) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 010COV.book Page 88 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)89GB1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. 7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it. 10.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License. 11.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 12.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit 010COV.book Page 89 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)90GBgeographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found. <one line to give the library’s name and an idea of what it does.> Copyright (C) <year> <name of author>This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of ViceThat’s all there is to it!010COV.book Page 90 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)91GBNotice regarding other third-party softwareThis product contains the following software applications for which Sony has been licensed either directly or indirectly by third parties.1. OpenSSL (including the library called “Original SSLeay”)2. libcurl3. libjpeg4. libpng5. ncurses6. ntp7. zlib8. Expat9. NetBSDBy request of the copyright holders of these software applications, Sony provides our customers with the following notice.1. OpenSSLCopyright (c) 1998 - 2007 The OpenSSL Project.All rights reserved.Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com)All rights reserved.This product includes software developed by the OpenSSL.Project for use in the OpenSSL Toolkit(http://www.openssl.org/).OpenSSL LicenseRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgment:“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project.6. Redistributions of any form whatsoever must retain the following acknowledgment:“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)”THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OFLIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.Original SSLeay LicenseRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement:“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word “cryptographic” can be left out if the rouines from the library being used are not cryptographic related :-).4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement:“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 010COV.book Page 91 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)92GBSOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.2. libcurlCOPYRIGHT AND PERMISSION NOTICECopyright (c) 1996 - 2008, Daniel Stenberg, <daniel@haxx.se>.All rights reserved.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. INNO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.3. libjpegThis software is based in part on the work of the Independent JPEG Group.4. libpngCopyright (c) 2004, 2006-2009 Glenn Randers-PehrsonCopyright (c) 2000-2002 Glenn Randers-PehrsonCopyright (c) 1998, 1999 Glenn Randers-PehrsonCopyright (c) 1996, 1997 Andreas DilgerCopyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.5. ncursesCopyright (c) 1998-2004,2006 Free Software Foundation, Inc.Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization.6. ntpCopyright (c) David L. Mills 1992-2009Permission to use, copy, modify, and distribute this software and its documentation for any purpose with or without fee is hereby granted, provided that the above copyright notice appears in all copies and that both the copyright notice and this permission notice appear in supporting documentation, and that the name University of Delaware not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. The University of Delaware makes no representations about the suitability this software for any purpose. It is provided “as is” without express or implied warranty.7. zlibCopyright (C) 1995-2004 Jean-loup Gailly and Mark Adler8. ExpatCOPYRIGHT AND PERMISSION NOTICECopyright (c) 1996 - 2008, Daniel Stenberg, <daniel@haxx.se>.All rights reserved.Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.9. NetBSDCopyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights reserved. 010COV.book Page 92 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: RightNAS-SV20i/SV20Di4-192-583-11(1)93GBRedistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3. All advertising materials mentioning features or use of this software must display the following acknowledgement:This product includes software developed by the NetBSD Foundation, Inc. and its contributors.4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.The following notices are required to satisfy the license terms of the software that we have mentioned in this document:This product includes software developed by Adam Glass.This product includes software developed by Bill Paul.This product includes software developed by Brini.This product includes software developed by Causality Limited.This product includes software developed by Charles M. Hannum.This product includes software developed by Christian E. Hopps.This product includes software developed by Christopher G. Demetriou.This product includes software developed by Christopher G. Demetriou for theNetBSD Project.This product includes software developed by Christos Zoulas.This product includes software developed by Gardner Buchanan.This product includes software developed by Gordon W. RossThis product includes software developed by Manuel Bouyer.This product includes software developed by Mark Brinicombe.This product includes software developed by Rolf Grossmann.This product includes software developed by TooLs GmbH.This product includes software developed by the NetBSD Foundation, Inc. and its contributors.This product includes software developed by the RiscBSD team.This product includes software developed by the University of California, Berkeley and its contributors.This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its contributors.This product includes software developed by the University of California, Lawrence Berkeley Laboratory.This product includes software developed for the NetBSD Project by Wasabi Systems, Inc.This product includes software developed for the NetBSD Project by Matthias Drochner.010COV.book Page 93 Monday, June 14, 2010 9:12 AM$

$C:\_Work\Netjuke\Luke\IM\4192583111NASSV20i\01GB-NASSV20i\120LIC.fmmasterpage: LeftNAS-SV20i/SV20Di4-192-583-11(1)94GBTrademarks, etc.•This software is based in part on the work of the Independent JPEG Group.•PARTY STREAMING and the PARTY STREAMING logo are trademarks of Sony Corporation.•VAIO, , and VAIO Media are registered trademarks of Sony Corporation.•US and foreign patents licensed from Dolby Laboratories.•MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.•Microsoft, Windows, Windows Vista, Windows 7™, Windows Media are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.•iPod is a trademark of Apple Inc., registered in the U.S. and other countries.•iPhone is a trademark of Apple Inc.•“ ” is a mark of the Wi-Fi Alliance.•DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.WPA SupplicantCopyright (c) 2003-2006, Jouni Malinen <jkmaline@cc.hut.fi> and contributorsAll Rights Reserved.Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:1 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.2 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.3 Neither the name(s) of the above-listed copyright holder(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.•THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii)DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM •This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.Content providers are using the digital rights management technology for Windows Media contained in this device (“WM-DRM”) to protect the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated.This device uses WM-DRM software to play Secure Content (“WM-DRM Software”). If the security of the WM-DRM Software in this device has been compromised, owners of Secure Content (“Secure Content Owners”) may request that Microsoft revoke the WM-DRM Software’s right to acquire new licenses to copy, display and/or play Secure Content. Revocation does not alter the WM-DRM Software’s ability to play unprotected content. A list of revoked WM-DRM Software is sent to your device whenever you download a license for Secure Content from the Internet or from a PC. Microsoft may, in conjunction with such license, also download revocation lists onto your device on behalf of Secure Content Owners.•The system names and product names indicated in this manual are generally the trademarks or registered trademarks of the manufacturer.•In this manual, Microsoft Windows XP Home Edition, Microsoft Windows XP Professional and Microsoft Windows XP Media Center Edition are referred to as Windows XP.•In this manual, Microsoft Windows Vista Home Basic, Microsoft Windows Vista Home Premium, Microsoft Windows Vista Business and Microsoft Windows Vista Ultimate are referred to as Windows Vista.•In this manual, Microsoft Windows 7 Starter, Microsoft Windows 7 Home Premium, Microsoft Windows 7 Professional, Microsoft Windows 7 Ultimate are referred to as Windows 7.•™ and ® marks are omitted in this manual.010COV.book Page 94 Monday, June 14, 2010 9:12 AM$

Sony Group NASSV20I Network Audio System/Server User Manual NAS SV20i SV20Di

Sony Corporation Network Audio System/Server NAS SV20i SV20Di

User manual

Navigation menu

Namespaces

Views

Navigation