Sony Group PSP1001B2 Portable Play Station User Manual PSP 1001

Sony Corporation Portable Play Station PSP 1001

Manual

2-657-883-12(2)Instruction manualMode d'emploiPSP-1001TMfilename C:\DataDisk\#Saggyou\1024\835900S PSP1001K_USFR\2649166121_PSP1001K_US\01EN01COV.fmmodel name1PSP-10012-657-883-12(2)masterpage:RightUSFREncontrará un manual de instrucciones en español en nuestro sitio Web en http://www.us.playstation.com/psp/manuals.aspx01EN01COV.fm  Page 1  Monday, October 24, 2005  1:32 PM
masterpage:Leftfilename C:\DataDisk\#Saggyou\1024\835900S PSP1001K_USFR\2649166121_PSP1001K_US\01EN02WAR.fmmodel name1PSP-10012-657-883-12(2)2WARNINGSTo avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.Use the supplied AC adaptor only. If you use other types, it may cause fire, electrical shocks or a malfunction.For customers in the U.S.A. and CanadaCautionUse of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.The use of optical instruments with this product will increase eye hazard.This appliance is classified as a CLASS 1 LASER product under IEC60825-1: 2001.WARNINGS01EN02WAR.fm  Page 2  Monday, October 24, 2005  1:33 PM
3filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN02WAR.fmUSmodel name1PSP-10012-657-883-12(1)WARNINGSmasterpage:RightFor customers in the U.S.A.NOTE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.If you have questions about this product, call our technical support line at 1-800-345-7669, or write to:Sony Computer Entertainment AmericaConsumer Services/Technical SupportPO Box 5888, San Mateo, CA 94402-0888 U.S.A.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Declaration of ConformityTrade Name :Model No. :Responsible Party :Address :Telephone No. :SONYPSP-1001Sony Electronics Inc.16450 W. Bernardo Dr. San Diego, CA 92127 U.S.A.858-942-223001PSP-1001 EN.book  Page 3  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN02WAR.fmmodel name1PSP-10012-657-883-12(1)4WARNINGSYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.FCC Radiation Exposure StatementThis transmitter complies with FCC radiation exposure limit set forth for an uncontrolled environment. To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any changes to the antenna or the device could result in the device exceeding the RF exposure requirements and void user authorization to operate the equipment. In addition, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Owner's RecordThe model and serial numbers are located inside the battery compartment of the unit. Record the serial number in the space provided below. Refer to the number whenever you call for technical assistance at 1-800-345-7669.Model No. PSP-1001Serial No.______________For customers in CanadaThis Class B digital apparatus complies with Canadian ICES-003. The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.IC Radiation Exposure StatementThis transmitter complies with IC radiation exposure limit set forth for an uncontrolled environment. To comply with the IC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any changes to the antenna or the device could result in the device exceeding the RF exposure requirements and void user authorization to operate the equipment. In addition, this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.01PSP-1001 EN.book  Page 4  Friday, October 7, 2005  6:12 PM
5filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN02WAR.fmUSmodel name1PSP-10012-657-883-12(1)WARNINGSmasterpage:RightPhotosensitivityA very small percentage of individuals may experience epileptic seizures when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or while playing video games, including games played on the PSP™ system, may trigger an epileptic seizure in these individuals. Certain conditions may trigger previously undetected epileptic symptoms even in persons who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition, consult your physician prior to playing. If you experience any of the following symptoms while playing a video game - dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, any involuntary movement or convulsions - IMMEDIATELY discontinue use and consult your physician before resuming play.Radio wavesRadio waves may affect electronic equipment or medical devices (for example, pacemakers), which may cause malfunctions and possible injuries.• If you use a pacemaker or other medical device, consult your physician or the manufacturer of your medical device before using the wireless networking feature.• Keep the PSP™ system at least 9 inches (23 cm) away from a pacemaker or other medical devices when using the wireless networking feature. • Do not use the wireless networking feature in the following locations:– Areas where its use is prohibited, such as in airplanes or hospitals. Abide by medical institution regulations when using the PSP™ system on their premises. Additionally, you may be violating air safety regulations punishable by fines by using the wireless networking feature in an airplane or by using the PSP™ system during takeoff or landing.– Crowded areas.– Areas near fire alarms, automatic doors and other types of automated equipment.• Use caution when using the wireless networking feature in a vehicle, as radio waves may affect electronic equipment in some vehicles.01PSP-1001 EN.book  Page 5  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN03HOM.fmmodel name1PSP-10012-657-883-12(1)6GAME page 42• Playing games• Managing saved dataVIDEO page 46• Playing UMD™VIDEO• Playing videos saved on a Memory Stick Duo™MUSIC page 59• Playing UMD™MUSIC• Playing music saved on a Memory Stick Duo™PHOTO page 72• Displaying images saved on a Memory Stick Duo™• Playing slideshowsSETTINGS page 90• Adjusting PSP™ system settings• Creating video, photo or network settings• Connecting to devices using the USB connectorNETWORK page 86• Using the Internet• Using the LocationFree™ Player01PSP-1001 EN.book  Page 6  Friday, October 7, 2005  6:12 PM
7masterpage:Rightfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN03HOM.fmUSmodel name1PSP-10012-657-883-12(1)Basic button operationsThis manual includes instructions for the basic features of the PSP™ system. For additional information and answers to frequently asked questions about the PSP™ system, visit our Web site at http://www.us.playstation.com/pspFor more information on the use of Memory Stick Duo™ media, visit http://www.memorystick.com/pspSelect a categorySelect an itemUsing the home menuThe basic operation of the PSP™ system starts from the home menu. Press the home button to display the home menu and use the directional buttons to navigate the horizontal and vertical icon bars.POWERHOLDSELECTHOME VOL STARTDirectional buttons:Home button: button: Used to select on-screen itemsDisplays the options menu for selected items button:  Cancels selected operations button:  Confirms selected itemsDisplays the home menu01PSP-1001 EN.book  Page 7  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN04TOC.fmmodel name1PSP-10012-657-883-12(1)8Table of contentsWARNINGS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Battery pack precautions   . . . . . . . . . . . . . . . . . . . . . . . . . . 17xPreparationChecking the package contents  . . . . . . . . . . . . . . . . . . . . . 19Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . 20Preparing the PSP™ system for use  . . . . . . . . . . . . . . . . . 25Connecting the headphones with remote control  . . . . . . . . 28xBasic operationsTurning the PSP™ system on and off   . . . . . . . . . . . . . . . . 29Using sleep mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Inserting a UMD™   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Inserting a Memory Stick Duo™ . . . . . . . . . . . . . . . . . . . . . 34Avoiding unintended operation of the PSP™ system . . . . . 35Using the sound button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Using the display button  . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Battery   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39xGamePlaying a game . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Game options menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44Copying and deleting saved data  . . . . . . . . . . . . . . . . . . . . 45xVideoWatching a video   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46Using the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48Operating with PSP™ system buttons or the remote control   . . . . . . . . . . . . . . . . . . . . . . . . . . 55Video options menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56Saving videos on a Memory Stick Duo™  . . . . . . . . . . . . . . 57Table of contents01PSP-1001 EN.book  Page 8  Friday, October 7, 2005  6:12 PM
9masterpage:Rightfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN04TOC.fmUSmodel name1PSP-10012-657-883-12(1)Table of contentsxMusicListening to music   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  59Using the control panel   . . . . . . . . . . . . . . . . . . . . . . . . . . .  62Operating with PSP™ system buttons or the remote control  . . . . . . . . . . . . . . . . . . . . . . . . . .  66Music options menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  67Transferring and saving music on a Memory Stick Duo™  . . . . . . . . . . . . . . . . . . . . . . . . . .  69xPhotoViewing images  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  72Using the control panel   . . . . . . . . . . . . . . . . . . . . . . . . . . .  73Operating with PSP™ system buttons or the remote control  . . . . . . . . . . . . . . . . . . . . . . . . . .  77Photo options menu  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  78Playing slideshows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  80Saving images on a Memory Stick Duo™  . . . . . . . . . . . . .  84xNetworkUsing the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  86Connecting to the Internet  . . . . . . . . . . . . . . . . . . . . . . . . .  8701PSP-1001 EN.book  Page 9  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN04TOC.fmmodel name1PSP-10012-657-883-12(1)10 Table of contentsxSettingsSettings for the PSP™ system  . . . . . . . . . . . . . . . . . . . . . . 90Video Settings     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Photo Settings     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93System Settings    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Theme Settings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97Date & Time Settings    . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Power Save Settings     . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Sound Settings    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101Security Settings   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102USB Connection    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Network Settings     . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Network Update    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115How to use the keyboard  . . . . . . . . . . . . . . . . . . . . . . . . . 118xAdditional informationPSP™ updates  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121Compatible media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131LIMITED WARRANTY  . . . . . . . . . . . . . . . . . . . . . . . . . . . 13901PSP-1001 EN.book  Page 10  Friday, October 7, 2005  6:12 PM
11filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmUSmodel name1PSP-10012-657-883-12(1)Precautionsmasterpage:RightBefore using this product, carefully read this manual and retain it for future reference.SafetyThis product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To help ensure accident-free operation, follow these guidelines:• Observe all warnings, precautions and instructions.• Regularly inspect the AC adaptor and AC power cord for damage and for dust build-up around the power plug or electrical outlet.• Stop use, unplug the AC power cord from the electrical outlet and disconnect any other cables immediately if the device functions in an abnormal manner, produces unusual sounds or smells or becomes too hot to touch.• Call SCEA Consumer Services at 1-800-345-7669 if the device does not operate properly.Use and handling• Use in a well-lit area and keep the screen a safe distance from your face.• Avoid prolonged use of the PSP™ system. To help prevent eyestrain, take a break of about 15 minutes during every hour of play.• If you experience any of the following health problems, discontinue use of the system immediately. If symptoms persist, consult with your physician.– Dizziness, nausea, fatigue or symptoms similar to motion sickness– Discomfort or pain in a part of the body, such as eyes, ears, hands or arms• Keep the system and accessories out of the reach of small children.Small children may swallow the Memory Stick Duo™ or wrap the cables/straps around themselves, which may inflict injury or cause an accident or a malfunction.• Do not use the system while driving or riding a bicycle. Looking at the screen or operating the system while driving an automobile or riding a bicycle may result in a traffic accident.• Take extra care when using the system while walking.• Be careful not to pinch your fingers when closing the disc cover.Precautions01PSP-1001 EN.book  Page 11  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmmodel name1PSP-10012-657-883-12(1)12 Precautions• Do not use the system or accessories near water.• Use only attachments/accessories specified by the manufacturer.• Do not use the headphones if they cause discomfort to your skin.If the supplied headphones cause discomfort to your skin, discontinue use immediately. If symptoms do not subside even after discontinuing use, seek medical attention.• Do not expose the system or accessories to high temperatures, high humidity, or direct sunlight. • Do not leave the system or accessories in a car with the windows closed (particularly in summer).• Do not expose the system or accessories to dust, smoke or steam.• Do not allow liquid or small particles to get into the system or accessories.• Do not place the system or accessories on surfaces that are tilted, unstable or subject to vibration.• Do not throw, drop or step on the system or accessories, and do not subject the devices to strong physical shock. Sitting down with the PSP™ system in a pocket or placing the system in the bottom of a backpack along with heavy objects may cause damage to the system. • Do not forcibly twist the PSP™ system or expose the system to strong physical shock during gameplay, as doing so can damage the system or cause the disc cover to open, ejecting the disc. Handle the analog stick with care.• Do not put heavy objects on the system or accessories.• Do not touch or insert foreign objects into the connectors of the system or accessories.• Do not place the system close to items with a magnetic strip, such as credit cards.• Do not touch the system or AC adaptor for an extended period of time while in use. Depending on the conditions of use, the system or AC adaptor may reach temperatures of 40°C/104°F or more. Extended contact under these conditions may cause low-temperature burns*. * Low-temperature burns are burns that occur when the skin is in contact with objects of relatively low temperatures (40°C or more/104°F or more) for an extended period of time.AC adaptor and AC power cord use• Do not touch the plug of the AC power cord with wet hands.• Do not touch the AC power cord, AC adaptor or the system, if connected to an electrical outlet, during an electrical storm.• Do not use a power source other than the supplied battery pack, AC adaptor and AC power cord.01PSP-1001 EN.book  Page 12  Friday, October 7, 2005  6:12 PM
13filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmUSmodel name1PSP-10012-657-883-12(1)Precautionsmasterpage:Right• Do not allow dust or foreign matter to build up around the system or accessory connectors. If there is dust or foreign matter on the system's connectors or the AC power cord, wipe it off with a dry cloth before connecting. Dust or other matter on the connectors can result in fire or electrical shock.• Unplug the AC power cord from the electrical outlet and remove the battery pack from the system before cleaning or when you do not intend to use the system for an extended period of time.• Protect the AC power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the system.• When disconnecting the AC power cord, hold it by the plug and pull straight out from the electrical socket. Never pull by the cord and do not pull at an angle. • Do not use the system to play games or video when the system is covered with any type of fabric. If you want to pause or temporarily store the system while playing games or video, put the system in sleep mode before placing it in the pouch. Also do not use the AC adaptor when covered with fabric. This may help to avoid overheating.• Do not connect the AC power cord to a voltage transformer or inverter.Connecting the AC power cord to a voltage transformer for overseas travel or an inverter for use in an automobile may cause heat to build up in the AC adaptor and may cause burns or a malfunction.LCD screen• The LCD screen is made of glass and may crack if subjected to excessive force.• Red, blue or green spots (bright spots) or black spots (dark spots) may appear in certain locations on the LCD screen. The appearance of such spots is a normal occurrence associated with LCD screens and is not a sign of a malfunction. LCD screens are made using highly precise technology. However, a very small number of dark pixels or continuously lit pixels exist on each screen. Also, a distorted image may remain on the screen for several seconds after the system has been turned off.• Direct exposure to sunlight may damage the system's LCD screen. Be careful when using the system outdoors or near a window.• When using the system in a cold environment, you may notice shadows on the graphics or the screen may appear darker than usual. This is not a malfunction, and the screen will return to normal when the temperature goes up.01PSP-1001 EN.book  Page 13  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmmodel name1PSP-10012-657-883-12(1)14 Precautions• Do not leave still images displayed on the screen for an extended period of time. This may cause a faint image to be left permanently on the screen.Memory Stick Duo™For best results, follow these guidelines:• Do not touch the connector area (A) with your hands or with metal objects.• Do not press hard when writing on the memo area (B).• Do not insert a Memory Stick Duo™ into a device designed to accept only standard-size Memory Stick™ media.• Do not use or store a Memory Stick Duo™ in the following:– Places subject to high temperatures, such as in a hot vehicle– Locations exposed to direct sunlight– Locations that are very humid or conducive to corrosion• Use the supplied case to carry or store the Memory Stick Duo™.• When using Memory Stick Duo™ media without an erasure prevention switch, take care not to overwrite or delete data by accident. If your Memory Stick Duo™ media has an erasure prevention switch, you can prevent data from being saved, edited, or deleted by setting the switch in the LOCK position.xRecorded dataDo not use the Memory Stick Duo™ in the following ways, as doing so may result in data loss or corruption:• Removing the Memory Stick Duo™ or turning off the system while it is loading or saving data or being formatted.• Using it in a location that is exposed to static electricity or electrical interference.If, for any reason, software or data loss or corruption occurs, it is usually not possible to recover the software or data. It is recommended that you regularly back up software and data. Sony Computer Entertainment Inc. and its subsidiaries and affiliates will not be held liable for any damages or injury in the case of software or data loss or corruption. 01PSP-1001 EN.book  Page 14  Friday, October 7, 2005  6:12 PM
15filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmUSmodel name1PSP-10012-657-883-12(1)Precautionsmasterpage:RightPouch• If you want to pause or temporarily store the system while playing games or video, put the system in sleep mode before placing it in the pouch. This may help to avoid overheating.• Put both the PSP™ system and the remote control in hold mode to help prevent unintended operation.Never disassemble the system or supplied accessoriesUse the PSP™ system and accessories according to the instructions in this manual. No authorization for the analysis or modification of the system, or the analysis and use of its circuit configurations, is provided. Disassembling will void the system warranty. Additionally, there is a risk of fire, electrical shock or malfunction. The LCD screen, in particular, contains dangerous, high-voltage parts, and the laser beam for reading UMD™ may cause visual impairment if exposed directly to the eyes.Using the access pointWhen using the PSP™ system's 'Scan' function to select the wireless LAN access point, access points that are not intended for public use may be displayed. Only connect to a personal access point that you are authorized to use, or one that is available through a public wireless LAN or hotspot service.Overseas useDepending on the country, there are limitations on the use of certain types of radio waves. In some cases, use of the system may lead to a fine or other penalty.Moisture condensationIf the PSP™ system or UMD™ is brought directly from a cold location to a warm one, moisture may condense on the lens inside the system or on the UMD™. Should this occur, the system may not operate properly. In this case, remove the UMD™ and turn off and unplug the system. Do not put the UMD™ In accordance with copyright law, no recorded data may be used for purposes other than personal enjoyment without permission from the copyright holder.01PSP-1001 EN.book  Page 15  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmmodel name1PSP-10012-657-883-12(1)16 Precautionsback in until the moisture evaporates (this may take several hours). If the system still does not operate properly, contact our technical support line at 1-800-345-7669 for assistance.UMD™ handling• Do not touch the opening on the rear of the disc (recorded surface of the disc) with your fingers.• Do not allow dust, sand, foreign objects or other types of dirt to get on the disc.• If the UMD™ becomes dirty, gently wipe the exterior and recorded surfaces of the UMD™ using a soft cloth. Do not use solvents or other chemicals.CleaningFor safety reasons, unplug the AC power cord from the electrical outlet and remove the battery pack from the system before cleaning.xCleaning the exterior surfaceWipe gently with a soft cloth. Do not use solvents or other chemicals to clean the exterior of the PSP™ system.xCleaning the LCD screenWipe gently with a soft cloth.xCleaning the connectors• Do not use when the connectors of the system, AC adaptor or the AC power cord are not clean. Remove the dirt with a dry cloth or cotton swab. If used when dirty, the flow of electrical current may be obstructed.• If the headphones or remote control connectors become dirty, this could cause noise or interruptions in sound. Wipe the connectors with a dry, soft cloth to keep in clean condition.01PSP-1001 EN.book  Page 16  Friday, October 7, 2005  6:12 PM
17filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmUSmodel name1PSP-10012-657-883-12(1)Precautionsmasterpage:RightBattery pack precautionsDo not handle a damaged or leaking battery pack.Contact with the material can result in injury or burns to the eyes or skin. Even if foreign substances are not immediately visible, chemical changes in the material can result in injuries occurring at a later time.Handle the battery pack with care.The battery pack may explode or present a fire or chemical burn hazard if it is not handled carefully.• Do not allow the battery pack to come into contact with fire or subject it to extreme temperatures such as in direct sunlight, in a vehicle exposed to the sun or near a heat source.• Do not cause the battery pack to short-circuit.• Do not disassemble or tamper with the battery pack.• Prevent damage to the battery pack. Do not carry or store the battery pack with metal items such as coins or keys. If damaged, discontinue use. • Do not throw or drop the battery pack or subject it to strong physical shock. • Do not put heavy objects on or apply pressure to the battery pack.• Do not allow the battery pack to come into contact with liquids. If it becomes wet, discontinue use until it is completely dry.• Keep the battery pack out of the reach of small children.• If the PSP™ system will not be used for an extended period of time, remove the battery pack and store it in a cool, dry place out of the reach of children.• Use only the supplied battery pack or a replacement marked for use with the PSP™ system.• Use only the designated AC adaptor to charge the battery pack. WarningsIf you come into contact with material from a leaking battery pack, take the following actions:• If the material gets into the eyes, do not rub. Immediately flush the eyes with clean water and seek medical attention.• If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water. Consult your physician if inflammation or soreness develops.01PSP-1001 EN.book  Page 17  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN05PCT.fmmodel name1PSP-10012-657-883-12(1)18 PrecautionsRecycling Lithium-Ion BatteriesLithium-Ion batteries are recyclable.You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.rbrc.org/CautionDo not handle damaged or leaking Lithium-Ion batteries.01PSP-1001 EN.book  Page 18  Friday, October 7, 2005  6:12 PM
19filename C:\DataDisk\#Saggyou\1024\835900S PSP1001K_USFR\2649166121_PSP1001K_US\01EN06PPT.fmPreparationUSmodel name1PSP-10012-657-883-12(2)Checking the package contentsmasterpage:RightCheck that you have all of the following items. If any items are missing, contact our technical support line at 1-800-345-7669 for assistance.PreparationChecking the package contentsPOWERHOLDSELECTHOMEVOLSTART5VsBattery packsPSP™ (PlayStation®Portable) systemsAC adaptorsAC power cord sMemory Stick Duo™ (32 MB)sWrist strapsPouchsClothsPrinted materialsSupplied with the Value Pack:sMemory Stick PRO Duo™ (1 GB)sStandsUSB cableSupplied with the Giga Pack:sHeadphones with remote control01EN06PPT.fm  Page 19  Monday, October 24, 2005  1:33 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmmodel name1PSP-10012-657-883-12(1)20 Part names and functionsSystem frontPart names and functionsAL buttonBDirectional buttonsCMemory Stick Duo™ access indicatorLights up when saving and loading dataDWLAN access indicatorLights up when using the wireless networking featureEAnalog stickCan be used with games that support analog operation.To optimize the analog stick's functionality, with the "System Information" screen under "System Settings" ( page 96) displayed, you can rotate the analog stick in a circular motion to adjust its range of movement.FStrap holderAttach as shown in the diagram.GLeft speakerHHome buttonDisplays the home menuIVolume - buttonTurns the volume downJVolume + buttonTurns the volume upPOWERHOLDSELECTHOME VOL STARTHOME VOL01PSP-1001 EN.book  Page 20  Friday, October 7, 2005  6:12 PM
21filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmPreparationUSmodel name1PSP-10012-657-883-12(1)Part names and functionsmasterpage:RightSystem rearKLCD screenLDisplay buttonAdjusts screen brightness ( page 38)MSound buttonAdjusts the tone ( page 36)NSelect buttonOStart buttonPR buttonQbuttonRbuttonSbuttonTbuttonUPower indicatorLights up, flashes or changes color to indicate system status (page29)VHold indicatorTurns yellow when in hold mode (page35)WRight speakerABattery cover CDisc coverBPush buttonPUSHUMD01PSP-1001 EN.book  Page 21  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmmodel name1PSP-10012-657-883-12(1)22 Part names and functionsSystem topSystem bottomAIR port COpen latchBUSB connectorAHeadset connector CDC IN 5V connectorBCharging terminalsLROPENDC  IN5V01PSP-1001 EN.book  Page 22  Friday, October 7, 2005  6:12 PM
23filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmPreparationUSmodel name1PSP-10012-657-883-12(1)Part names and functionsmasterpage:RightSystem left sideSystem right side* References in this manual to "Memory Stick Duo™" apply to both Memory Stick Duo™ and Memory Stick PRO Duo™ unless otherwise noted. Also, the PSP™ system messages use "Memory Stick" as a general reference to Memory Stick Duo™ and Memory Stick PRO Duo™. Note that standard-size Memory Stick™ media cannot be used with the PSP™ system.AMemory Stick Duo™ slot*BWLAN switchTurns on the wireless networking featureAPower/hold switchTurns the system on and off, puts in sleep mode ( pages 29, 31) and locks the system buttons ( page 35)R:WLAN onr:WLAN offR:Power switchr:Hold switch01PSP-1001 EN.book  Page 23  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmmodel name1PSP-10012-657-883-12(1)24 Part names and functionsHeadphones with remote controlA. buttonB> buttonCVolume + buttonTurns the volume upDVolume - buttonTurns the volume downEu buttonAHold switchLocks the operation of the remote control. Note that this button does not lock the buttons of the PSP™ system.BClipStandThe stand is supplied with the Giga Pack.VOLRemote control sideRemote control frontStandHintDo not place the stand on unstable surfaces.01PSP-1001 EN.book  Page 24  Friday, October 7, 2005  6:12 PM
25filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmPreparationUSmodel name1PSP-10012-657-883-12(1)Preparing the PSP™ system for usemasterpage:RightBefore using the PSP™ system for the first time after purchase, you must follow these steps to charge the battery.Before inserting the battery pack, find the serial and model numbers listed within the battery compartment and make a record of the numbers in the spaces provided under Owner's Record on page 4.1Remove the battery cover.2Insert the battery pack.3Replace the battery cover.Preparing the PSP™ system for useGetting started 1: Inserting the battery packUMDPUSHHold down the push button and slide the battery cover open.UMDPUSHPAlign the bottom surface of the battery pack with the system to attach.UMDPUSH2Slide the battery cover in the direction of the arrow until it locks firmly into place.1Align the tabs.01PSP-1001 EN.book  Page 25  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmmodel name1PSP-10012-657-883-12(1)26 Preparing the PSP™ system for use1Plug the AC power cord into the AC adaptor.2Connect the AC adaptor to the DC IN 5V connector on the system bottom.Getting started 2: ChargingCaution• The socket-outlet shall be installed near the equipment and shall be easily accessible.• Do not plug the AC power cord for the PSP™ system into an electrical outlet until you have made all other connections.AC power cordAC adaptorPOWERHOLDSELECT STARTDC  IN5VAC adaptor01PSP-1001 EN.book  Page 26  Friday, October 7, 2005  6:12 PM
27filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmPreparationUSmodel name1PSP-10012-657-883-12(1)Preparing the PSP™ system for usemasterpage:Right3Plug the AC power cord into an electrical outlet.The power indicator lights up in orange, indicating that charging has begun. The power indicator will turn off when the battery is fully charged.4Unplug the AC power cord from the electrical outlet and disconnect the AC adaptor from the system.HintFor information on how to charge the battery, see "Battery" ( page 39).1Turn on the PSP™ system ( page 29).The power indicator lights up in green, and the initial setup screen is displayed.2Follow the on-screen instructions to make settings for system language, time zone, date and time and nickname.When you have completed initial setup, the home menu ( page 7) is displayed.Hints• See "How to use the keyboard" ( page 118) for information on how to enter characters.• Settings made during initial setup can be changed in   (Settings). See "System Settings" ( page 94) and "Date & Time Settings" ( page 98) for details. Getting started 3: Initial setupPOWERHOLDSELECT STARTAC power cordTo electrical outlet01PSP-1001 EN.book  Page 27  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN06PPT.fmmodel name1PSP-10012-657-883-12(1)28 Connecting the headphones with remote control1Connect the headphones to the PSP™ system.HintThe remote control is exclusively for use with the PSP™ system and accessories made exclusively for the PSP™ system. It cannot be used with other devices. Also, remote controls made for use with other devices cannot be used to operate the PSP™ system.Connecting the headphones with remote controlHOME VOLHeadphonesRemote control1Plug the headphones into the remote control.2Plug the headphones into the headset connector on the system bottom.01PSP-1001 EN.book  Page 28  Friday, October 7, 2005  6:12 PM
29filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Turning the PSP™ system on and offmasterpage:Right1Slide the power/hold switch up.The power indicator lights up in green, and the home menu is displayed.Hints• If the PSP™ system is turned on with a UMD™ inserted, the UMD™ will begin playback automatically.• The system can be used with the AC adaptor connected. In this case, charging will begin automatically. The power indicator lights up in orange while charging.• Do not use the PSP™ system with the AC adaptor when the battery pack is not inserted in the system. If the AC adaptor is disconnected suddenly, it may result in damage to the system.Power indicatorThe color and condition (solid or flashing) of the light indicates system status.Basic operationsTurning the PSP™ system on and offTurning the system onSolid green Power onSolid orange ChargingFlashing green Charge level is lowLight off Power off/in sleep modePOWERHOLDSTARTSELECT01PSP-1001 EN.book  Page 29  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)30 Turning the PSP™ system on and off1Hold the power/hold switch in the up position for more than three seconds.The power indicator flashes and then turns off, indicating that the system is turned off.Turning the system off01PSP-1001 EN.book  Page 30  Friday, October 7, 2005  6:12 PM
31filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Using sleep modemasterpage:RightIf the PSP™ system is switched to sleep mode, the software that is playing will be paused. When sleep mode is cleared, you can begin playback from the point where the system entered sleep mode.Notices• Do not put the system in sleep mode while the Memory Stick Duo™ access indicator is on. This may cause data loss or corruption. • If the battery runs out while in sleep mode, when you clear sleep mode, the system will not return to the screen that was displayed before entering sleep mode. It is recommended that you save game data before you put the system in sleep mode.1With the system turned on, slide the power/hold switch up.The power indicator flashes and then turns off, and the system enters sleep mode.HintSome software cannot be put in sleep mode.Using sleep modePutting into sleep modePOWERHOLDSTARTSELECT01PSP-1001 EN.book  Page 31  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)32 Using sleep mode1Slide the power/hold switch up again.Sleep mode is cleared.Hints• You can also clear sleep mode by pressing the u (play/pause) button of the remote control, if the system was put in sleep mode during music or video playback.• After clearing sleep mode with video or music content, you can resume playback from the point where the system entered sleep mode by following the steps below.Clearing sleep modeVideoWith the icon for the video selected, do any of the following:- Press the start button or   button.- Press the u button of the remote control.- Select "Play" from the options menu ( page 56).Music saved on a Memory Stick Duo™With the icon for the Memory Stick Duo™ selected, do any of the following:- Press the start button.- Press the u button of the remote control.- Select "Play" from the options menu ( page 67).01PSP-1001 EN.book  Page 32  Friday, October 7, 2005  6:12 PM
33filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Inserting a UMD™masterpage:RightNoticeDo not eject a UMD™ during playback.1Slide the open latch on the PSP™ system top.The disc cover opens.2Insert a UMD™.With the disc label facing the system rear, slide the UMD™ in the direction of the arrow until it is fully inserted.3Close the disc cover.Ejecting the UMD™Slide the open latch on the system top to open the disc cover.HintWhen ejecting, hold the PSP™ system in an upright position (as shown in the diagram above).Inserting a UMD™LROPENDo not touch the recorded surface.Open latch01PSP-1001 EN.book  Page 33  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)34 Inserting a Memory Stick Duo™1Open the slot cover and insert the Memory Stick Duo™.Ejecting the Memory Stick Duo™Open the slot cover and press the Memory Stick Duo™ in the direction of the arrow to eject.NoticeWhen the Memory Stick Duo™ access indicator is lit, the PSP™ system is saving or loading data. Do not eject the Memory Stick Duo™, turn off the system or put the PSP™ system in sleep mode while the indicator is lit. Doing so may cause data loss or corruption.Inserting a Memory Stick Duo™WarningKeep Memory Stick Duo™ media out of the reach of small children, as the media could be swallowed by accident.Open the slot cover in the direction of the arrow.Press until fully inserted.Front sideHOMEMemory Stick Duo™ access indicator01PSP-1001 EN.book  Page 34  Friday, October 7, 2005  6:12 PM
35filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Avoiding unintended operation of the PSP™ systemmasterpage:Right1Slide the power/hold switch down.The hold indicator turns yellow, indicating that the system buttons are locked.Clearing hold modeSlide the power/hold switch to its original position.Avoiding unintended operation of the PSP™ system POWERHOLDSTARTSELECTThe switch locks into place.01PSP-1001 EN.book  Page 35  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)36 Using the sound buttonThe sound button is used to adjust the tone and to mute the sound for audio playback and for key tones.Tone can only be adjusted when using the headphones.1Press the sound button.Each time you press the button, the tone changes as follows:HintThe tone setting is temporarily set to "OFF" during gameplay.1Hold down the sound button for more than one second.The sound will be muted.Using the sound buttonAdjusting the toneHEAVY Strengthens both bass and treble to produce an intense soundPOPS Strengthens the mid-range; ideal for vocalsJAZZ Strengthens both bass and treble to produce a balanced soundUNIQUE Strengthens bass, treble and mid-range soundOFF Normal toneTurning off the sound (mute)POWERHOLDSELECT START01PSP-1001 EN.book  Page 36  Friday, October 7, 2005  6:12 PM
37filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Using the sound buttonmasterpage:RightClearing muteYou can clear mute by any of the following methods:• Pressing the sound button• Pressing the volume + or volume - button on the system or on the remote control01PSP-1001 EN.book  Page 37  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)38 Using the display buttonThe display button is used to adjust screen brightness.1Press the display button.Each time you press the button, the display changes as follows:HintLevel 4 can be selected only while the PSP™ system is plugged in using the AC adaptor.1Hold down the display button for more than one second.The backlight will turn off and the screen will go blank.If you press any of the system buttons, the screen will be displayed again.Using the display buttonAdjusting screen brightnessLevel 1Level 2Level 3(Level 4)Turning off the backlightPOWERHOLDSELECT STARTDarkerBrighter01PSP-1001 EN.book  Page 38  Friday, October 7, 2005  6:12 PM
39filename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmBasic operationsUSmodel name1PSP-10012-657-883-12(1)Batterymasterpage:RightThe battery charge level is displayed on the screen.Estimating the remaining battery power Hints• If the power indicator flashes green, save game progress and recharge the battery. If the battery runs out before you save, game progress will be lost.• The charge level display may vary slightly from the actual charge level, depending on the usage conditions and environmental factors, such as temperature. If the display is not correct, use the battery pack until it is completely out of power and then recharge. Note that the display may not be accurate in the following conditions:– if the battery is used for extended periods in conditions of high temperature– if the battery is not used for a long time after recharging– if the battery has been recharged many timesBatteryBattery charge levelThere is plenty of power left.The battery is getting low.The battery has almost run out.No battery power remains. The power indicator flashes green. Recharge the battery.Battery charge level01PSP-1001 EN.book  Page 39  Friday, October 7, 2005  6:12 PM
masterpage:Leftfilename H:\#Sagyocyu\#10 OCT\1007\2649166121_PSP1001K_US\01EN07BAS.fmmodel name1PSP-10012-657-883-12(1)40 Battery• Battery charge level can also be checked in "Battery Information" under ""System Settings" ( page 95).• If the PSP™ system is left unused after the battery runs out, the date and time settings may be reset. If this occurs, the date and time setting screen will be displayed the next time the system is turned on.• The battery cannot be recharged when the WLAN feature is in use.*1 Based on tests conducted using the supplied battery pack, with the system in single player mode, with headphones with remote control in use, and with wireless LAN not in use.*2 Based on tests conducted using variables of system speakers versus headphones, volume level and screen brightness level.HintBattery duration may vary depending on the type of content being played or usage conditions such as screen brightness and environmental factors. As battery ages, anticipate lower battery duration.When using the supplied battery pack, it takes approximately 2 hours and 20 minutes to fully charge the battery using the AC adaptor after the battery has run out.Hints• Charge in a temperature of 10°C to 30°C/50°F to 86°F. Charging may not be as effective in other environments.• Charging may take longer when the system is turned on during charging.The battery pack has a limited lifespan. Battery duration will decrease with repeated usage and age. If the battery duration becomes extremely short, it may be time to replace the battery pack.Estimated battery durationGame Approximately 3 - 6 hours*1Video playback Approximately 3 - 5 hours*2Estimating the battery charge timeBattery pack life01PSP-1001 EN.book  Page 40  Friday, October 7, 2005  6:12 PM

Navigation menu