Sony Group SLVM20HF Transmitter portion of VCR User Manual 8
Sony Corporation Transmitter portion of VCR 8
Contents
- 1. 8
- 2. 8a
8
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 46423 |
| Application ID | MRsu1Po1ECc0GmGkVlxafg== |
| Document Description | 8 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 78.58kB (982205 bits) |
| Date Submitted | 1999-07-07 00:00:00 |
| Date Available | 1998-06-04 00:00:00 |
| Creation Date | 2001-06-10 15:05:29 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-06-10 15:05:31 |
| Document Title | 8 |
($5.
‘ 01r’°‘-GJ_SLV-MZC>\'5>SIEUp ‘ :z
3-552-974-11 U)
Video Cassette
Recorder
Hookup/Setup
VHS
Mfififi
Ecfiwézm
SLV—MZOHF
©1995 by Sony Corporation
v f as us, mm AM !
g?
SONY SLV-MZOHF(E) 3-862-974411 (1)
Preca ui‘lons
safely
- Operate the unit only on 120 v AC, so Hz
- it an) h' g tails men the raotnet, unplug the Uni!
and hate i\ checked by qualified personnel
before operating ii any tinthtr
- This Hull \5 not dlxonnxled From the AC
oower source (mains) a! long at it is connected
to lhe WAII cullel.even iflhe uni: its!” has been
turned off.
- One blade or the Vine is wirlet than the other for
the purpose of safety and will fit into the power
outlet only one way. it you are unable to inserl
the plug {ully intuthe outlet, contnel yuurSony
dealer
- Unplug the unit (tom the will outlet llyou do
not intend to use it tut an extendeu period of
time. Ti: dlxnnnxl the (0rd, pull II out by the
plug, never by the (Ni
installing
- Allow adequate air circulation to prevent
internal heat buildup.
- Do not place the unit on surfacs (rugs,
blankzLi, etc.) or near materials (curtains,
draperies) lhal ma block the ventilation slats.
~ Do not install the u near heat sources such as
radiators 01 air dum, or in h place subjeet lo
direet sunlight, excessive dust. mechanital
Vlbmnon or shcxk.
~ Do not install the unit in an inclined position. it
is designed to be operated in a horizontal
position only.
- Keeo the unit and castettes away {torn
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
- Do not place heavy objeets on the unit
. if the unit it brought dtreetly fim‘n a cold to a
warm location, moisture my condense inside
the VCR and cause damage In the Video head
and tape When ou firs! install the unit, or
when m. me new. cold toa warm
locaiium wait for about one hour before
operating the unit
—] ! owim_5tvmoh;.5antolte : é
SONY SLV»M20HF (E) 34562-97441 (1)
in 119.1qu an
| T
Table of contents
4 Step 1: Unpacking
5 Step 2: Setting up the remote commander
a Step 3: Hookups
9 Audio/video(A/V) hookup
11 Hookup 1: Using cable box control
14 Hookup 2: No cable box, or incompatible cable box with only a
few scrambled channels
‘17 Hookup 3: Antenna hookup
20 Hookup 4: Incompatible cable box With many scrambled
channels
23 Hookup 5: D55 (Digital Satellite System) receiver
26 Hookup 6: Incompatible cable box with only a few scrambled
channels, using anA/B switch
29 Selecting a language
30 Setting the clock
. 34 Setting up cable box control é
[$7 39 Presettingchannels
43 General setup information
45 index to parts and controls
back (over
Index
01mm stv-m HF sum 3 r gs; is m 09 AM
I _ 20 _ z 45‘—
xrz
SONY SLV-MQOHF (E) 3-862-974-11 (l)
Unpacking
Check that you have received the following items wilh the VCR:
~ Remote commander - Cable Mouse (cable box controller)
- Size AA (R6) batteries - 750m coaxial calale with F—type
connectors
6 6
~ Audio/video cable (3-phono, l-mlni 0 Jack cover
lo 3-phono, l-mlni)
- Monaural cable (l-mini lo 1mm) . Smartflle labels
cam-1 ij-Mxnflsgmus A A u: meow
Kb"
SONY SLV-MZOHF (E) 386297441 (l)
Inserting the batteries
Insert two Size AA (R6) batterles by
matching the + and - an the batteries
to the diagram inside the battery
(ompartment.
Insert the negative (—) end first, then
push in and down untll the positive (+)
end clicks lnto posrtion.
Using the remote commander flemm sensor
You can use this remote
commander to operate this VCR
and a Sony TV or AV receiver.
Buttons on the remote
commander marked with a dot
(-) can be used to operate your
Sony TV.
The RECEIVER VOL +/4 and
M'UTING buttons can be used to
operate your Sony AV receiver.
TV I VIDEO
RECEIVER
VOL +/—
MUTlNG
To operate Set TV IleED tn
the VCR VlDEQ and point at the remote sensor on the VCR
a Sony Tv TV and point at the remote sensor on theTV
Notes
. thh normal the, the balterie: should last about three to six months.
- ll you ac not use the mmnte commander for an extended period of tlme, remove
the batteries to award possible damage from battery leakage.
‘ Do nut use a new battery with an old one.
Do not use dlfterent types or hatterre,
Some Sony AV receiver) may not be operated mm the remote commander.
mntinued
02n°»\9_$LV~M20NF,Sam:HE 5 A sn.:ltr7_6ta 7M
1-3—
SONY SLV-MZOHF (E) 37562-97441 (1)
figs
Step 2: Setting up the remote commander (continued)
Setting the COMMAND MODE switch
To remotely control the VCR with
the remote commander, set
COMMAND MODE on the
remote commander to Lhe same
position as that on the VCR.
Usually set to VTR 3, Change the
position as shown below to
control other Sony vac:
VTR 1: For Sony Beramax format VCKs
VTR 2: For Sony 8mm format VCRS
VTR 3: For Sony VHS format VCRs
To change the command mode
positron of the VCR, press and
hold COMMAND MODE on the
VCR (or about two seconds and
repeat until the desired position
appears in the display window. (OMMAND MODE
e I:
(OMMAND
MODE
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs If your TV
is Listed in the table below, set the appropriate manufacturer's c
1 Set
/ VIDEO at the top of the remote commander to
ode number.
2 Hold POWER down, and enter your TV's code number(s) using the
number buttons. Then release POWER.
Now you can use the POWER, VOL +/—, CH +/—, and TV/WDEO buttons to
control your TV, You can also use the buttons arked with a
dot (<) to
control a Sony TV. To control the VCR, reset VIDEO to
V'DEO .
Tip
- I! you set your TV's code number correctly while the TV is turned on, the TV turns
ufFautm-natieally.
—l | calm-1 _SLV+020MF_SomaHE s assnzzmm
SONY SLV-M20HF (E)
3-862-974-11 (1)
Code numbers of mmmllable TVs
If more than one code number is listed, xry entering them one at a time until
you find the one that works with your Tv,
Manufaflurer Code
Manulauurer Code
Manufactuvu Code
anes
number numbzr number
Sony 01 JVC D9 RCA 04, 10
Akai 01 KMC 03 Sampu 12
AGE 04 Magnavux us. 05,12 Sanyu n
Canxurinn 11 Maranu 01,13 Scan 12
Cnmnadu 03 MGA/Milsubishi 04,1Z,13,17 Sears 07, 10, 11
Curb-Mathei 12 NEC 01,12 Sharp 03, 05,18
Daytron 12 Panasonic 06,19 Sylvania DB, 12
Emerson 03, 0-1, 1-1 Phiko 03, N Teknika » 03, 08, 14
Fisher 11 Philips 05 Toshiba 07
General Elertri: 06, 10 Pioneer 16 Wards 03, D4, 12
Gold Star 03, 04,17 Portland (73 Yurx 12
Hitachi 02, 03 Quasar 06,13 Zenith 15
$— J.C.Fenny (H. 12 Radio Shazk 05, 14
- n the w use) a different remuru conuul system from the une programmed «u work
with the VCR. you (amok control your TV with the remote mmmander.
- I! ynu enter a new code number, (he code number prevmusly entered wiu be erased.
~ When W“ replac! the batteries of the remote commanden the code number may
autemahcally resel. 511 the appropriate code number every am you replace Lhe
banmes.
7 ‘ uzux.|9_SLV~mzaH?_Sah-raHE
as 3 W. 5.40 PM
SONY SLV-M2OHF (E)
3-56297441 (1)
Hookups
Selecting the best hookup option
There are many ways in which your VCR can be hooked up. To hook up
your VCR so that it works best for you, first scan through the table below.
Then use the accompanying diagrams and procedures on the following
pages to set up your VCR.
If you have
TV that has audio/video inputs
Use
Refer to
Audio/video (AIV) hookup, than Pages 9 and 10
{allow one ulthe hookups beluw.
Cable box max is compatible with the Hookup 1 Page! 11 m 13
VCR's able box control feature
No cable box m incompatible cable box Hookup 2 Pages 14 m 16
with only a few scrambled elm-1:15
Antenna only,nu cableTV Hookup a Page; 17 to 19
Incnmpatible cable box with many Hookup 4 Pages 20 m 22
scrambled channels
055" receiver Hookup 5 Pages 13 m 25
Incompatible cable box with only a Few Hookup 6 Pages 25 to 23
scrambled channels, using an a/a
switch
After you've completed the connections, follow the instructions for setup.
During setup, it you need more details on the procedure described. page
numbers are provided where you can find complete, step—by~step
instructions.
After you‘ve completed the setup, you‘re ready to use your VCR.
Procedures differ depending on the hookup you used. For an overview,
refer to "Quick reference to using the VCR" on the back cover of the
supplied operating instructions. '
Before you get started
~ Turn all the power to all equipment.
- Do not connect the AC power cords until all of the connections are
completed.
- Be sure you make connections firmly. Loose connections may cause
picture distortion,
- Ityour TV doesn’t match any of the examples provided, see your nearest
Sony dealer or qualified technician. ‘
' DSS‘ 19’ A registered lrademark uf DlRECI'V, lnc , a unit of Hughes Electronics Corpuralinn.
“‘| l nam-1_sLV-t.120NF_5hould use a
U/v band mixer (no! supplled) Fordelails, see page“
continued
51'04-19_5LvilZDNF_5¢lu9HE 17 l man, we Pu
SONY SLV-MZOHFlE) 3-852-974-11 (1)
| [4
Step 3: Hookups (continued)
mrvm setup s
1 Set rhe RF UNIT switch m
CH 3 or CH 4, whichever [Mmlfllflfl_
channel is not used in your g 1
area. If both are used, set _‘
the swi1:h to either channel.
For details, see page 43.
Ii you made A/V
(unnections (from page 9),
you can skip this step,
2 Press EASYSEF UP on the
VCR
o The LANGUAGE menu appears. Change the
un-saegn display hnguagu To Spanish
(ESPANOL) or French (FRANCAIS) if desired,
and press the (ulsar suck (OK) For details, see
page 29,
‘ e The CLOCK SH menu appears. Select AUTO
“$3“ and press the rursur slick (0K). Fordmfls,see
page an
e The ZIP POSTALCODE menu appears. Push
are rursur stick to Mir/4M» m enter me
ZIP/POSTAL com-z in yourarea and press (he
cursor slick (OK). (You can also ussrhe number
buuuns re enter me ZlF/POSTAL CODE)
0 The CABLE BOX menu appears. Select OFF and
press the (user srir‘k (0K).
9 The TUNER mesa menu appears. Sex
ANTENNA/CABLE m ANTand press the
cursor stick (OK) For delails, see page 411
18
rm m
am 10 um
RF UNIT
mg“, m.“
7m m a;
run Lanai-l]: —u m.
sr ' 149 um! 5a
mam-l
u.. a w "r.“
m: rgtéwns
Ear-11m“ mm n
m0%' 9 éfi wfi
m y!
m... nun g
casr s aux manor 7
rmfmi ,, m- ‘
menus rum
mnh (u (uh
msmrcms
WEN m.“
rm am.
m... s. v
_l I 520A»! _va.uzuu;As.-.-ene 15 ea) new PM
SONY SLV-MZOHF(E) 3-852-974-11 (1)
7 I
e The AUTO “557 m m—
surts. MOFRESEI
m- w .. emu
"census
Normal display
Automatit (lock setting
Once you‘ve set up Ute VCR, it automatically sets the clock the first time you
tum off the VCR After that, whenever you turn ntf the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Tlme. The VCR sets the
clock by picking up a time signal provided by some TV channels
If you want to use the timer to record fight away, or if the channels in your
area do not carry time signals, set the dock manually. For details, see page
32. '
mnxinued
19
' 91341170 m
' "I } W-tsASLV-MEOHESumgnE us ‘ r
SONY SLV'MZOHFE) 3-552-974-11 (1)
Step 3: Hookups (continued)
Hookup _ _ ages 20 lo 22
Incompatible cable box with many scrambled
channels
Recommended use
Use ttus hookup lf your cable company cannot supply a cable box that is
compatible with the VCR‘s cable box central feature, and your cable system
scrambles all or most channels.
What you can do with this hookup
- Record any channel by selecting the channel on the cable box
What you can‘t do
- Record with the (able box turned off
' Record one channel while watching another channel
~ Select channels directly on the VCR
- Imam programs wth VCR Plus+
0 Use the TV GUIDE Plus+ system
Cable box “eam'w
VHF/UHF
..... EA Match the type nf
connector on your
TV: A, E, m C.
B For (unnenur
types 8 and C, no
UHF connection
is required
VCR
20
02mv25_SLV-Mm> to enter the
ZIP/POSTAL CODE in your are: and press the
cursor stick (OK). (You can also use the number
buttons to enter the ZIP/POSTAL com-z.)
zwmsr we
in“! vain Wm:
not: me n.
me u,
n." stun
e The CABLE BOX menu appears. Seleet ON, For
details, see page 34.
uucx: I0 mm
hurt mama-u; tn null
24
——| | emafitv-umnfiswens 24 eutmvs m 1 |"_
SONY SLV-M2OHF(E) 3-862-974-11 (1)
e Enlzryuur DSSretewg-rcude numberand pu>h
Lhe ' . ' ‘ ' _ mslcxmmn
cursorsutka Fordexaxl:,>ee page35 “Mm“ ml
m-sacem’z - »=
'-x‘ Nu 312m
emu,- CMLEml
cusnuu as up
Hun u m 7, ”mg
unnull m n.- can:
GSetrnurDSSrKewer m m—
output channel (BOX mammyvm
OUTPUT cmm 1.le “mm 55, u, u m.
and pm; the curwr .
sunk (OK).
Normal display
More V
- To successfully record a program from the Dss waiver, proceed as follows:
— Leave the D55 receiver on all the time.
— Tum D” the display (menu screen, channel nut-Abel, ext.) of 1h: D55 retain:
— To recurd or receive locked channds, unlod< the channel before the VCR sans
recording.
- To set pay-per—view programs in the fimer semng, order the pay-Per—View
pmgram before the VCR starts recording.
.@ - Some prugrams are copy protected You cannot record these programi {$—
(antinued
—l nmstLvaHas-wm E 25 9mm 3.25 PM I r“
SONY SLV-M20HF(E) 3-8624974-11 (1)
step 3: Hookups (continued)
Hookup , 7 Pages 25 to 28
Incompatible cable box with only a few scrambled
channels, using an NB switch
Recommended use
By using anA/B switch (not supplied), this hookup allows you to record
both scrambled and unscrambled channels conveniently.
What you can do with this hookup
~ Record any unscrambled channel by selecting the channel directly on the
VCR (the A18 switch is set to A)
- Record any scxambled channel by selecting the channel on the cable box
(the All; switch is set to B)
What you can't do
- Record one scrambled channel while watching another channel (the A/B
switch is set to B)
(able box Rear ofTV
Splitter
A» <_ VHF/UHF ©—
' 84—1 ........ “E A Match the type ol
connector on your
5 or TV: A, s, in ct ,
..... B For connector
9 types 5 and c, no
UHF UHF ennnemnn ls
requlred.
AI! swilth
26
02/20» _5LV-M20HF.Sa-'-a NE 26 A— u J.|7. 7:16 PM
SONY SLV-M20HF (E) 3-862-974-11 (1)
Hookup S VCR setup
1 Set the RF urmswirch m
CH 3 or CH 4, whichever
channel is not used in your
area. If both are used, set
the switch to eilher channel.
For details, see page 43
If you made A/V
connections (from page 9),
WM
Press EASY SET UP on the
VCR
o The LANGUAGE menu appear; Change the
an-szregn disylay language m Spanish
(ESPANOL) or Frendr (FRANCA15)ifdesired,
and press lhe cursor slick (OK). For details, see
page 19.
9 The CLOCK 557 menu appears. SeleckAUl'O
_@ and press rm tursnr stick (OK). For details. see
page 30
o The 21? POSTAL CODE menu appears. Push
the Cursm stick in f/JN-l-P to enter the
sz/rosrAL CODE in your area and guess «be
(user sdck (0K) (Yau can also use the number
butlons to enter me Zip/POSTAL CODE)
0 The CABLE BOX menu appears. saw on: and
press the cursor slick (0K),
cmo-zleV—MZDHEStw. x E 21 A
1,7
HF UNIT
CH: cm
_| |_.
W5
you can skip this step. i O Wur- ... ‘
Set the A/E switch to "A.“ l J “3
uu Era an.“
(nun u..-
um Iv flu"
___I
mlvgécmz
(mu m lupus“
can Y.“ “55
m r.,,
rm mug
mus sax comm
u-l m 10 mm
run rm (- awl
mminued
51311125 PM
SONY SLV»M20HF (E) 34562-97441 (1)
I i—
Step 3: Hookups (continued)
e The TUNER FRI-SET menu appearst Set
ANTENNA/CABLE m CABLE and press the
cum»! stick (OK). For drmlst we page 40,
menu was
_N mg,
mg“ 1
lulu mm .
G The AUTO FRESET
starts.
SFYUB “man mm
Mo nun
set us» I, m.
”mess-m
Normal di5|alay
4 Preset the cable box output channel (usually 2,3, am). For details, see
page 41.
o Press MENU and select TUNER pass—r.
AuVANEED 5mm
suAlYflLE Eun’
mfg-e ....e. u
llcm nun push
0 Enter the cable box output channel Set
MANUAL SET to ADD and press the cursor n A
stizk (0K) fléfte'é“—
AFT M'—
mz W5
s- e. taunt-B. rm
Eta “mews
Automatic clock setting
Once you’ve set up the VCR, it aummatically sets the clock the first time you
tum off the VCIL After that, whenever you tum Off the VCR, it checks the
time and adjusts the dock, even for Daylight Saving Time. The VCR sets the
dock by picking up a time signal provided by some TV channelse
If you want to use the timer to retard right away, or if the channels in your
area do not carry time signals, set the clock manually. For details, see page
32.
Note
~ To use the Auto Clock Set feature, set the A/s switch to A.
28
_l‘ unwajwmzwasmpna u n.:v,w.7:|sm
SONY SLV-MEOHF (E) 3-862-97441 (1)
Selecting a
language
You can change the onvscreen display
language.
MENU
Cursov fiitk
f/i
0K
Press MENU, then push the cursor stick to
f/ & to move the cursor to LANGUAGE
and press the cursor stick (OK).
When using the EASY SE!“ UP procedure,
skip this step.
~© PUSH m< -@
2 ' Cum“ Push the cursor stick to N} to select ENGLISH, BPANOL, or
FRANCAIS, then press the cursor stick (0K).
vau 0K
29
”T | cmv~sL5Lv-M20HF,S~M;.HE 29 ”225.11! M J |"“
SONY SLV~M20HF (E) 3-862-974-11 (1)
”G?"
”‘I | um- eSLV~M20HF_SeNpJIE w
30
Setting the clock
Using the Auto Clock Set
feature
Some TV and cable channels transmit
time signals with their broadcasts. Your
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if
a channel in your area is broadcasting a
time signal. lt’ broadcasters in your area
are not yer sending time signals, set the
time manually (page 32).
Cursor stick
tun-l»
0K
Before you start...
s Turn on the VCR and the TV,
' Set the TV to the VCR channel (channel 3 or 4) If your TV is
connected to the VCR using A/V connections, set the TV to video
input.
- Press TV/VXDEO to display the VIDEO indicator in the display
window
. Press INPUT SELECT so that a channel number appears in the
display window,
Press MENU, then push the cursor stick to
f/l to move the cursor to CLOCK SET
and press the cursor stick (OK).
When using the EASY SET UP procedure,
skip this step
Push the cursor stick to d-l-b to select AUTO, then press the
cursor stick (OK)
PUSH ox
‘6 93.317. 7m w
SONY SLV-MZOHF(E) 3-562-974-11 (1)
3 To activate the Auto Clock Set function, turn a“ the VCR
The VCR automatically sets the clock by searching ‘for a channel that
carries a time signal and sets your time zone and Daylight Saving
‘l'lme (if applicable).
Notes
- The dockcannm be m aulomatlzally ifynu don't receive a thannel um carries a
time signal in your area, use, set lhe clock manually.
- (“here are lull,- a few channels in your area that tarry time signals, swing the dud:
autumatlally may lake up to about 30 minutes.
v (i you use Hookup l ur-1,mak< slug yuu leave the (able box an.
(onlinued
j 1 aux-shslv-Mzauasmvuz 31 wJJLTMF’M l 1—
SONY SLV-MZOHF (E) 3-862974'11 (I)
Setting the dock (continued)
Using Manual Clock Set
The TV GUIDE Plus-0 system operates
acmrding to the time signals transmitted
from certain TV stations, However,
when you set CLOCK SET to MANUAL,
the manual timer operates according to
the VCR's own clock, and the TV GUIDE
Plus+ timer operates according to the
time signals transmitted from certain TV
stations. M ENU
Cursar stick
fun-l»
0K
Press MENU, then push the eursor suck (0
f/§ lo move the cursor to CLOCK SET
and press the tursor stick (OK).
When using the EASY SEI' UP procedure,
ki this t . .
- menu
«meson
/‘\.
2 “NM“ Push the cursar stick to @/-> to select
F.‘ MANUAL, then press the curscr sfid<
b Em
W5” W nu. ma 5 m m
on
Push the cursor stick to f/i to set the
month. -
unfit: .. m
mum new“
M u... y. m
DAY 6
32
7 l we; _SLV»M20HF_S~mg,1IE zz JR sanisrrsow I (—
sow SLV to set
ANTEAWA/CAELE to CABLE.
vusn 0K
' cvflsaa ~ To preset VHF and UHF channels:
Push the cursor stick to <—/-> to set
ANTENNA/CABLE to ANT.
mwngm or
Au?!) wssa
mum ssr an Jus:
m ~ ~~ PLAY bum," 21 Remote sensor (5)
E JOG button/indicator 2 1-13le IN VIDEO/AUDIO ”R
11 Q REC (record) button 13
(nntinued
“T [ nl'ls-SLsLV—MEMES-mp us 4:
é»
SONY SLV-MZOHF (E)
u z 25, 1:33 rm
I r
3-852-974-11 (1)
46
Index to parts and controls (continued)
Display window
1 Tuner indicator
Child Lock indicator
STEREO indicator
SAP (Second Audio Program)
indicator
HEN
Tape speed indicator
VIDEO indicator (30, 43)
AFC (Adaptive Picture Control)
indicator
um“
“j I canistwuwasmw KE 4;
~$>
SONV SLV~M20HF (E)
E BLANK indicator
E] Tracking indicator
] Line/channel indicator (30)
E Time counter/clock
@ Command mode indicator (6)
E Remaining time indicator
E] Tape/ recording indicator
951.25. 7:35 PM
3-862-974-11 (1)
Q5
I [—
Rear panel
AC puwer cord (8)
s um< (CONTROL s w) jack (10)
CABLE BOX CONTROL
(CONTROL 5 OUT) jack (11, 23)
{ms-1 IN AUDIO L/R/V'IDEO
jacks (m
5 CPD (Control and Program Dara) IN
jack
IE! G-Link jack'
ME“
Z] VHF/UHF IN connector (11,14,17,
m, 73, 26)
8 VIE/UHF OUT connector (11, 14,
17, 20, 73, 26)
5 RF (Radio Frequency) UNITswitch
(43)
3 LINE OUT AUDIO L/R/VIDEO
jacks (9)
continued
- Tm, jack 15 provided for fume expected funclinns.
if;
j | emsz,va-uzn><,=jawaus 47 "317,741 m ‘ [—
SONY SLV—MZOHF (E) 3-852-974-11 (1)
Index to parts and controls (continued)
Remote commander
[1] e EJECT button
E] Number buttons (6, 35,41)
[3] SET button
{1} ENTER button (41)
E SMARTFILE button
E a mac (lacmdflaunon
Blue button
T cums button .
[5] Green bunon
E « REW (rewind) button
» FF (fast forward) button
E > PLAY button g—
E I HOP butmn
E Shuttle ring
48
_ | uam- _va4.uzouF_s-ue.us «a sex was»; I {—
SONV SLV-MEOHF (E) 385237441 (1)
@ Ml VIDEO switch (5, 5)
j COMMAND MODE switch (6)
E POWER switch(6,43)
E VCR Plus4» button
E TV/VIDEO button (5.31143)
CLEAR bunon
E} 1315?sz button (40)
CH (channel) +/_ buttons (6, 37, 41)
VOL (volume) +/— buttons (6)
E MENU button (29)
[23 gum: stick (29)
ow“ {$—
@ ll PAUSE button
E7] joc button/indium”
tontinued
49
I 0m552_5LV-M20NF.Scmp HE £9 96121 7.36 PM
if?“
SONY SLV—MZOHF (E) 3-552-974-11 (1)
Index to parts and controls (continued)
Remote commander, with top cover opened
E SP (Standard PJa)‘)/EP (Extra Play)
button
INFO (information) button
AUDKO MONITOR buttun
COUNTER RESET button
QUICK TIMER button
041 [PH INDFX SEARCH buttons
SMART CUE button
INPUT suscrhunon (so)
TV/VIDEO button (5, 30, 43)
COUNTER/REMAIN button
CLEAR button
DISPLAYbutton (40) $-
CH (channel) +/— buttons (6, 37, 41)
VOL (volume) +/— buttons (6)
Lana
Ifz‘lfflfiua, m||£Ju|E
HMIESJE]
Receiver operation buttons
RECEIVER VOL (volume) +/—
buttons (5)
MUTING button (5)
50
0119<§_SLV-A|ZOHF.S¢NPHE sa A 552 15135 w
—9/- ’
SONY SLV-MEOHF (E) 34562-97441 (1)
| umsz,swwwr_smp.| |E 5! ¢ 9: z 25. me PM ‘
9.
SONY SLV~M20HF(E) 3-562-974-11 (l)
Index
A, B
Accnmrigssuppued 4
AFHAumFmeTuning) 42
Antennahookup 17
Audio/videoUVW
hookup 9
AuluClockSelftalure 30
Cable Box CuanI
cable box tude number
dun 35
sening 34
Cable hookup 11
Cable Mouse 34
Clark setting 30
Connening
tabla TV 11
external antenna
mnnecxur 44
UHF/VHF band
mixer 44
Sony Corporation ana in Malaysia
j | n;zs-sz_va-umn;_s.mp “E s:
Disabling channels 41
D55 (Digital Satellixe System)
E.EG,H,I,J,K
Easy Set Up 12,15,18,2L
24, 27
L. M, N, 0
languageselecdng 29
P. Q. R
Preseningchannels 39
5.T.U,V.W,X,Y,Z
SLink’” m
SONY SLV-MZOHF (E) 335297441 (1)
nus mam
¢ [—
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : Yes Create Date : 2001:06:10 15:05:29 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:06:10 15:05:31-04:00 Page Count : 52EXIF Metadata provided by EXIF.tools