Sony Group SRFV1BT FM/AM RADIO WITH BLUEBOOTH SPEAKER User Manual US1UC7 indd

Sony Corporation FM/AM RADIO WITH BLUEBOOTH SPEAKER US1UC7 indd

SRF-V1BT user manual for UC7

SRF-V1BT [US] 4-587-914-71(1)Listening to a preset stationNoteTo prevent the preset from being changed by mistake, do not hold down the preset button. Presetting stations (5 FM and 5 AM) Connecting with a BLUETOOTH device1 Tune to the station you want to preset.Follow the steps in “Listening to the Radio” above.2 Press and hold the desired preset button (1–5) until “Stored to [PRESET x].” appears on the display.Tips• If you try to store another station with the same preset number, the previously stored station will be replaced.• The preset button 3 on the unit has a tactile dot. Use the tactile dot as a reference when operating the unit.Example: Presetting a tuned station to the preset button 3 Listening to the Radio Setting the On Timer Listening to Music from a BLUETOOTH DeviceHour Minute Getting StartedExample: When the preset button 3 is pressedTo DC INAC adaptor (supplied)The built-in battery will be fully charged (“ ”) in up to 6 hours.1 Select the “FM” or “AM” function. 2 Select the desired preset station.1 Turn on the unit, and select the “Bluetooth” function.1 Turn on the NFC function of the BLUETOOTH device. 1 Start playback on the BLUETOOTH device.2 Select “Bluetooth pairing.” 3 On the BLUETOOTH device, activate the BLUETOOTH function and perform the pairing procedure.2 Touch the BLUETOOTH device to the N-Mark on the unit. 2 Adjust the volume. Connecting by One-touch (NFC) Listening to musicIf your BLUETOOTH device has an NFC function, this procedure is unnecessary. See “Connecting by One-touch (NFC)” below. Turn the TUNE dial to select an option. Press ENTER.Perform the same procedure for the following steps.Using the BLUETOOTH connection, you can listen to music from wirelessly connected BLUETOOTH devices such as smartphones, tablets, PCs, etc.When pairing is completed, the BLUETOOTH device’s name will appear on the display.For details, refer to the operating instructions supplied with the BLUETOOTH device.If you are prompted to enter a passkey, enter “0000.” Compatible smartphonesSmartphones with the NFC function built-in(OS: Android™ 2.3.3 or later, excluding Android 3.x) NFCNFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as smartphones and IC tags. Thanks to the NFC function, data communication – for example, BLUETOOTH pairing – can be achieved easily by simply touching NFC-compatible devices together (i.e., at the N-Mark symbol or location designated on each device).“ ” appears on the display.The radio turns on at the set time.To deactivate the timerPress ON TIMER again.Wall outletWhen setting to the last received stationWhen selecting from the preset station listWhen pairing is completed, the BLUETOOTH device’s name will appear on the display.To terminate the BLUETOOTH connectionTouch the BLUETOOTH device to the N-Mark on the unit.About the BLUETOOTH standby modeThe BLUETOOTH standby mode enables the unit to turn on automatically by making a BLUETOOTH connection from a BLUETOOTH device.See “Setting Menu Options” for details.TipAfter pressing FUNCTION once, you can also select a function by turning the TUNE dial and pressing ENTER.TUNE dial Press repeatedly.You can set the unit to turn on the radio automatically at the set time.NoteIf your NFC-compatible smartphone has an OS version that is older than Android 4.1.x, download and start the “NFC Easy Connect” application.“NFC Easy Connect” is a free application for Android smartphones that can be obtained from Google Play™. (The application may not be available in some countries/regions.)To improve FM/AM radio receptionTo adjust the volumePress repeatedly.1 Press SETTINGS.2 Select “On timer.” 3 Set the hour and minute. 4 Set the station received at the set time. 5 Activate the timer. Compatible BLUETOOTH devicesCompatibility requirements for the devices are as follows. Before using a device with this unit, check that it meets the requirements.• Devices must support A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile).• NFC capability (required only when using the NFC pairing function of the unit).1 Connect the unit to a wall outlet and charge the unit.TipWhen selecting from the preset station list, set the stations first. See “Presetting stations (5 FM and 5 AM)” for details.When using the unit for the first time, make sure to connect the unit to a wall outlet using the AC adaptor (supplied). Otherwise the unit will not turn on.ENTERThe unit automatically switches to the selected function in about 2 seconds.Select “SRF-V1BT.” If “SRF-V1BT” does not appear, perform a search of the device.To terminate the BLUETOOTH connectionSelect the function other than the BLUETOOTH function.Press ENTER.Press ENTER.Hour Minute Turn the TUNE dial to select an option. Press ENTER.Perform the same procedure for the following step.2 Press SETTINGS.3 Select “Time.” 4 Set the hour and minute.TipYou can select the clock display mode, 12-hour clock or 24-hour clock. See “Setting Menu Options” for details.DisplayDisplayTime setting Time settingPress ENTER.Press ENTER.Press ENTER, and press SETTINGS to exit the setting menu.1 Extend the antenna for FM radio reception.Tips• To stop the scanning, press BACK.• To change the scanning direction, turn the TUNE dial clockwise or counterclockwise.Scan tuningPress SCAN to start scanning stations.Manual tuningYou can manually tune to the desired frequency.If a receivable station is found, “[ENTER]:Select” appears on the display. Press ENTER to receive the station. (If you do not press ENTER within 3 seconds, the search will restart.)BACK2 Turn on the unit, and select the “FM” or “AM” function. 3 Select a desired station. TipThe power indicator lights up in green while the unit is turned on. To set the unit to standby mode, press  again.Power indicatorFirst set the clock. See “Getting Started” for details.Tips• The last set volume is stored in the unit’s memory.• VOL + on the unit has a tactile dot. Use the tactile dot as a reference when operating the unit.Press ENTER.Press ENTER.Press ENTER.Press ENTER.Press ENTER, and press SETTINGS to exit the setting menu.NoteThe On Timer function is disabled in off mode.When the sleep timer is set, “SLEEP” appears on the display.The unit enters standby mode automatically after a set time has elapsed.Setting the Sleep TimerPress SLEEP repeatedly to select the desired time (in minutes).ENTERTipBLUETOOTH wireless technology operates within a range of about 10m.When setting in standby modeTips• The last set time is stored in the unit’s memory.• You can check the time left until the unit enters standby mode by pressing SLEEP again after setting the sleep timer.When using the unit for the first time (if there is no pairing information in the unit)The unit will automatically switch to pairing mode. In this case, proceed to step 3.When connecting with the second and subsequent devicesProceed to step 2.Press repeatedly.The unit automatically switches to the selected function in about 2 seconds. Press SETTINGS. Turn the TUNE dial to select an option. Press ENTER.“Waiting for pairing” appears on the display.The last connected device will be connected automatically.If there is pairing information in the unitFM/AM RADIO with Bluetooth SPEAKEROperating Instructions©2016 Sony Corporation Printed in China4-587-914-71(1)SRF-V1BT
SRF-V1BT [US] 4-587-914-71(1)Notice for the customers in CanadaThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.Precautions• Operate the unit only on the power sources specified in “Specifications.” For AC operation, use only the supplied AC adaptor. Do not use any other type of AC adaptor.• Failure to use the supplied AC adaptor may cause the unit to malfunction, as the polarity of the plugs of other manufacturers may be different.• When operating the unit on the built-in battery, it is recommended that you remove the AC adaptor from the wall outlet and the DC IN jack. Disconnect the plug of the external power source before operating the unit.• Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or mechanical shock. Never leave in a car parked in the sun.• Do not expose the unit to strong impact or excessive force. A glass material is used for the display in some models. If the glass chips or cracks, it may cause injury. In that case, stop using the unit immediately and make sure not to touch the damaged parts.• Should any solid object or liquid fall into the unit, disconnect the AC adaptor, and have the unit checked by a qualified personnel before operating it any further.• Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnetism.• To clean the casing, use a soft dry cloth. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.• Do not operate the unit with wet hands since it may cause a short circuit.• Make sure not to splash water on the unit. This unit is not waterproof.• When you do not use the unit for a long time, charge the battery every 6 months.• Under certain circumstances, especially when the air is very dry, it is not uncommon to experience a discharge of static electricity, or shock, when your body comes in contact with another object, in this case the ear buds touching your ear(s). The energy from this natural discharge is extremely small and is not emitted by your product but rather a natural environmental occurrence.• Listening with this unit at high volume may affect your hearing. For traffic safety, do not use this unit while driving or cycling.If you have any questions or problems concerning your unit, please consult your nearest Sony dealer.TroubleshootingShould any problems persist after you have made the following checks, consult your nearest Sony dealer.GeneralDisplay is dim, or no indication is displayed.• The unit is being used in extremely high or low temperatures or in a place with excessive moisture.The volume cannot be turned up when the unit is powered by the built-in battery.• When the remaining battery level gets low (when the battery icon is empty), the maximum volume level is limited to “22.” Charge the unit by connecting the AC adaptor (supplied).The volume level is low in the “Bluetooth” function or the “AUDIO IN” function compared with the volume level when listening to the radio.• Adjust the volume on the connected device.The unit enters standby mode automatically.• By default, this unit is set to enter standby mode automatically after about 15 minutes of no operation or audio signal output. See “Auto power off” in “Setting Menu Options” for details.RadioVery weak or interrupted sound, or unsatisfactory reception.• If you are in a building, listen near a window.• Extend the antenna and adjust the length and the angle for best reception.• If a mobile phone is placed close to the unit, a loud noise may be heard from the unit. Keep the phone away from the unit.A desired station cannot be received when a preset button is pressed.• Make sure you have selected the desired band (FM or AM) before you press the preset button. One station for each band can be set to each button.• You may have held down the preset button to which the station was assigned, causing the station to be replaced by a new one. Assign the desired station again.• Preset buttons cannot be used when the setting menu is displayed.• If you have moved to another region, assign the new station to a preset button.BLUETOOTHThere is no sound.• Make sure that this unit is not too far from the BLUETOOTH device, or that this unit is not receiving interference from a wireless LAN, another 2.4 GHz wireless device, or a microwave oven.• Check that the BLUETOOTH connection was completed properly between this unit and the BLUETOOTH device.• Perform pairing again. (See “Connecting with a BLUETOOTH device.”)• Keep away from metal objects or surfaces.• Make sure that the BLUETOOTH function is activated on the BLUETOOTH device.The sound skips or the correspondence distance is short.• If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away if possible. Or use the device and the unit away from such sources.• Remove any obstacle between this unit and the device or move the device and the unit away from the obstacle.• Locate this unit and the device as close to each other as possible.• Re-position this unit.• Try using the BLUETOOTH device in another position.WARNINGTo reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles).To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus.Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.Excessive sound pressure from earphones and headphones can cause hearing loss.Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time.The nameplate is located on the bottom exterior.Owner’s RecordThe model and serial numbers are located on the bottom of the unit. Record these numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.Model No. SRF-V1BT Serial No. Important Safety Instructions1) Read these instructions.2) Keep these instructions.3) Heed all warnings.4) Follow all instructions.5) Do not use this apparatus near water.6) Clean only with dry cloth.7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11) Only use attachments/accessories specified by the manufacturer.12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.The following FCC/IC statement applies only to the version of this model manufactured for sale in the USA and Canada. Other versions may not comply with FCC/IC technical regulations. NOTE:For United States customers. Not applicable in Canada, including in the province of Quebec.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.CAUTIONYou are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.This equipment must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules.This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.This graphical symbol is located on the bottom of the unit.A connection cannot be established.• Depending on the device to be connected, it may require some time to start communication.• Perform pairing again. (See steps 2 and 3 of “Connecting with a BLUETOOTH device.”)• To listen to music on a device that does not have a BLUETOOTH function, such as a PC without BLUETOOTH function, connect the device to the AUDIO IN jack on the unit. (See “Listening to Music from an External Device” for details.)• A BLUETOOTH connection with two BLUETOOTH devices cannot be established at the same time.Pairing fails.• Bring the BLUETOOTH device closer to the unit.• Make sure that the BLUETOOTH function is activated on the BLUETOOTH device.• If the BLUETOOTH connection cannot be established after pairing is completed, perform step 3 of “Connecting with a BLUETOOTH device.”• Delete the model name of this unit from the BLUETOOTH device and perform pairing again. (See steps 2 and 3 of “Connecting with a BLUETOOTH device.”)Pairing using the NFC function fails.• Try pairing manually. (See “Connecting with a BLUETOOTH device.”) Some NFC-compatible smartphones may not be paired using the NFC function of this unit, depending on the features or specifications of the device.• Relaunch “NFC Easy Connect” and move the smartphone slowly over the N-Mark.• Check that the smartphone meets the compatibility requirements. (See “Compatible smartphones” in “Connecting by One-touch (NFC).”)If the unit still does not operate properlyTry pressing RESET on the bottom using a thin rod. The unit will restart, retaining the user-configured settings.If maintenance service is performedAll user-configured settings, such as preset radio stations, the sleep timer, and the clock, may be initialized.Please note your settings in case you need to configure them again.MessagesNo preset• No station in the selected band (FM or AM) has been preset to the pressed button. SpecificationsAUDIO POWER SPECIFICATIONSPOWER OUTPUT AND TOTAL HARMONIC DISTORTION(The United States model only)With 6-ohm loads, both channels driven from 150Hz  10,000Hz; rated 1.5W per channel-minimum RMS power, with no more than 10% total harmonic distortion in AC operation.Operating temperature range5°C – 35°C (xx°F – xx°F)Time display24-hour system or 12-hour systemFrequency rangeFM: 87.5 MHz – 108.0 MHz (0.1MHz step)AM: 530 kHz – 1,710 kHz (10kHz step)Intermediate frequencyFM: 128 kHzAM: 45 kHzSpeakerApprox. 45 mm (xx in) dia., 4 Ω, stereoAudio power output2.5 W + 2.5 W (when the unit is powered by the supplied AC adaptor)1.5 W + 1.5 W (when the unit is powered by the built-in battery)BLUETOOTHCommunication SystemBLUETOOTH Specification version 4.1OutputBLUETOOTH Specification Power Class 2Maximum communication rangeLine of sight approx. 10 m (33 feet)*1Frequency band2.4 GHz band (2.4000 GHz - 2.4835GHz)Modulation methodFHSSCompatible BLUETOOTH Profiles*2A2DP (Advanced Audio Distribution Profile)AVRCP (Audio/Video Remote Control Profile)Supported Codec*3SBC*4Transmission range (A2DP)20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.*3 Codec: Audio signal compression and conversion format*4 Subband CodecInputAUDIO IN jack (ø 3.5mm (xx in), stereo mini jack)Output (headphones) jack (ø 3.5 mm (xx in), stereo mini jack)Power requirementsBuilt-in lithium-ion rechargeable batteryPowerDC 5.8 V 2.0 A (using the supplied AC adaptor connected to AC 120 V, 60 Hz power supply) or, using built-in lithium-ion batteryBasic Operations: Setting Menu OptionsListening through HeadphonesConnect headphones that have a stereo or monaural* mini plug (not supplied). Listening to Music from an External DeviceNoteUse headphones with a stereo (3-pole) or monaural (2-pole) mini plug. No sound is heard when using other types of plugs.Usage life of lithium-ion batteryBLUETOOTH: Approx. 32 hours*1FM: Approx. 31 hours*1AM: Approx. 15.5 hours*1*1 When the specified music source is used and the volume level of the unit is set to the following — BLUETOOTH: 20 — FM: 25 — AM: 30BLUETOOTH: Approx. 15 hours*2FM: Approx. 25.5 hours*2AM: Approx. 15.5 hours*2*2 When the specified music source is used and the volume level of the unit is set to maximumPower consumptionAt the standby mode0.6W or less (when the brightness of the display is set high and the BLUETOOTH standby mode is set to on)At the off mode0.2W or lessDimensionsApprox. 106 mm  172 mm  117mm (xxin  xxin  xxin) (W/H/D) including projecting parts and controlsMassApprox. 880 g (xx lb xx oz)Supplied accessoriesAC adaptor (AC-E5820) (1)Warranty (1)Design and specifications are subject to change without notice.License and Trademark Notice• The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license.• The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries.• Android™ and Google Play™ are trademarks of Google Inc.• Other trademarks and trade names are those of their respective owners. In this manual, ™ and ® marks are not specified.For customers in the USAPlease register this product on line at the following website.http://www.sony.com/productregistrationProper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you.1 Connect the external device to the unit. 2 Turn on the unit, and select the “AUDIO IN” function. 3 Start playback on the connected device and adjust the volume.Portable digital music player, etc.To AUDIO INTo  (headphones)To go back to the upper menu levelPress BACK.To exit the setting menuPress SETTINGS again.Press repeatedly.The unit automatically switches to the selected function in about 2 seconds.Setting to Off ModeYou can set the unit to off mode to reduce the power consumption if you do not use the unit.Press and hold  for about 2 seconds to set to off mode. The display turns off.NoteThe On Timer function is disabled in off mode.TipWhen pressing  while the unit is turned on, the unit enters standby mode. In standby mode, the backlight of the display can be turned on if desired and the On Timer function is enabled.* When listening to stereo sound using monaural headphones, you will hear sound from the left channel only.1 ring2 ringsOther types of plugs cannot be used.Compatible plug types3 or more ringsMonaural* mini plugStereo mini plugBluetooth pairingSee “Connecting with a BLUETOOTH device.”On timerSee “Setting the On Timer.”SoundYou can adjust the sound level.Treble: Adjusts the level of high-pitched sound.Bass: Adjusts the level of low-pitched sound.BLUETOOTH optionsBLUETOOTH options can be set when the “Bluetooth” function is selected.Other optionsTimeTime setting: Sets the clock. See “Getting Started” for details.12H/24H: Select the clock display mode, 12-hour clock or 24-hour clock.NoteThe clock will be reset if the AC adaptor is unplugged and the built-in battery is completely exhausted.Beep Select “On” to activate the beep sound when you operate the unit.Bluetooth standbyWhen the BLUETOOTH standby mode is set to “On,” the unit enters waiting mode for a BLUETOOTH connection even when the unit is in standby mode. When making a BLUETOOTH connection from a BLUETOOTH device, the unit turns on automatically.Tips• Set the BLUETOOTH standby mode to “Off” to reduce the power consumption when the unit is in standby mode.• The power indicator lights up in umber while the unit is in standby mode, and when the BLUETOOTH standby mode is turned on.NoteIf the AC adaptor is unplugged, the BLUETOOTH standby mode is disabled.Auto power offWhen “Auto power off” is set to “Enable (15min),” the unit enters standby mode automatically in about 15 minutes if there is no operation or audio signal output.InitializeSelect “OK” to initialize the unit to the factory default settings. All settings, such as preset radio stations and the pairing registration information, will be deleted.Setting the Brightness of the DisplayNoteWhen the unit is powered by the built-in battery, the backlight of the display turns off in about half a minute after operation.Press repeatedly to select the desired brightness.Audio connection cable without resistor (not supplied)2 ringsStereo mini plug

Navigation menu