Sony Group TMRBT8IP Bluetooth Adapter User Manual HDX 2013

Download:
Mirror Download [FCC.gov]
Document ID	839864
Application ID	k+8lP2FnK3xxx7pNkDtb9g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.16kB (352004 bits)
Date Submitted	2007-09-06 00:00:00
Date Available	2007-10-01 00:00:00
Creation Date	2007-08-16 10:47:31
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2007-08-16 17:51:20
Document Title	HDX-2013
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Sony Corporation

3-279-360-31 (1)
Stereo Transmitter
Operating Instructions
US
Mode d’emploi
FR
Manual de instrucciones
ES
TMR-BT8iP
© 2007 Sony Corporation
WARNING
To reduce the risk of fire or
electric shock, do not expose this
apparatus to rain or moisture.
Compatible iPod models
The compatible iPod models are as
follows. Update your iPod to use
the latest software before you use it.
iPod is trademark of Apple Computer, Inc.,
registered in the U.S. and other countries
The Bluetooth word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Sony Corporation is
under license.
Other trademarks and trade names are those
of their respective owners.
INFORMATION:
This device complies with Part 15 of FCC
Rules and RSS-Gen of IC Rules. Operation is
subject to the following two conditions: (1)
this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of this device.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
iPod nano 2nd
generation
(aluminium)
iPod nano
1st generation
iPod 5th
generation (video)
iPod 4th
generation
(color display)
This equipment must not be co-located or
operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC/IC
radiation exposure limits set forth for
uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in
Supplement C to OET65 and RSS-102 of the
IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy
that it is deemed to comply without testing of
specific absorption ratio (SAR).
US
iPod 4th
generation
iPod mini
1st generation
Notes
 This unit is designed for iPod only. You
cannot connect any other portable audio
players.
 Sony cannot accept responsibility in the
event that data recorded to iPod is lost or
damaged when using an iPod connected
to this unit.
Table of Contents
What is Bluetooth wireless
technology? ............................ 4
Features ..................................... 5
Basic operation of Bluetooth
devices ..........................................6
Getting Started
Location and
Function of Parts ................... 7
Connecting to an iPod ............. 8
Pairing ..................................... 10
What is pairing? ..........................10
Pairing procedures......................10
US
On Indicators .......................... 13
Listening to music
Bluetooth Connecting /
Playing back ......................... 14
Controlling by the Remote .... 16
Additional Information
Precautions ............................. 17
Troubleshooting ..................... 19
Initializing this unit ............... 21
Specifications .......................... 22
US
What is Bluetooth wireless technology?
Bluetooth® wireless technology is a short-range wireless technology
that enables wireless data communication between digital devices,
such as a computer or digital camera. Bluetooth wireless technology
operates within a range of about 10 meters (about 30 feet). Connecting
two devices as necessary is common, but some devices can be
connected to multiple devices at the same time.
You do not need to use a cable for connection nor is it necessary for the
devices to face one another, such is the case with infrared technology.
For example, you can use such a device in a bag or pocket.
Bluetooth standard is an international standard supported by thousands
of companies all over the world, and employed by various companies
worldwide.
Communication System and Compatible Bluetooth Profile
of this unit
Profile is standardization of the function for each Bluetooth device
specification. This unit supports the following Bluetooth version and
profiles:
Communication System: Bluetooth Specification version 2.0 + EDR*
Compatible Bluetooth Profile:
– A2DP (Advanced Audio Distribution Profile)
– AVRCP (Audio/Video Remote Control Profile)
* Enhanced Data Rate
Notes
 To be able to use the Bluetooth function, the Bluetooth device to be connected
requires the same profile as the unit’s.
Note also that even if the same profile exists, devices may vary in function
depending on their specifications.
 Due to the characteristic of Bluetooth wireless technology the sound transmitted
from this unit is slightly delayed during listening to the music.
US
Features
This unit is an audio transmitter using Bluetooth wireless
technology.
You can enjoy music wirelessly by transmitting the audio signals
to a Bluetooth receiving device (headset, car stereo, speaker, stereo
component system, etc.), if you connect this unit to the iPod
(see page 2 on compatible iPod models) with the iPod connector
(30 pin).
This unit’s features are as follows:
 Wireless transmitter for streaming of high-quality stereo music
from iPod.
 Transmits music to other devices using Bluetooth wireless
technology.*1
 Basic remote control operation (play, pause, etc.) of iPod
functions via Bluetooth connection.*2
 Transmitter power supplied from iPod so no additional battery or
charging is needed.
*1 The connected Bluetooth device is required to support A2DP(Advanced Audio
Distribution Profile).
*2 The connected Bluetooth device is required to support AVRCP(Audio Video
Remote Control Profile).
iPod with dock
connector port
(30 pin)
This unit
Bluetooth headset, etc.
 Tip
For details on Bluetooth technology, see page 4.
US
Basic operation of Bluetooth devices
The following example describes how you can transmit music
played on an iPod connected to this unit, and listen on a Bluetooth
receiving device (headset).
Pairing
Enables a Bluetooth receiving device and this unit to recognize one another.
You do not need to recognize one another next time if you did once.
iPod with dock
connector port
(30 pin)
This unit
Bluetooth receiving
device (headset)
For more details, see page 10.
Bluetooth connecting
Turn on the Bluetooth receiving device and play the iPod. Bluetooth
connection is established automatically.
For more details, see page 13.
Listening to music
You can enjoy listening to music played on your iPod connected to this unit
through the Bluetooth receiving device.
For more details, see page 13.
US
Getting Started
Location and Function of Parts
 iPod connector
(30 pin)
Connects to the
dock connector of an iPod
(page 8).
 Indicator
 Power button
Performs the following:
• Turning on/off of this unit
(page 8).
• Pairing (page 10).
• Initializing this unit
(page 20).
Indicates this unit’s status
(page 12).
US
Connecting to an iPod
Connect this unit to the dock connector port of an iPod firmly.
Dock connector port (30 pin)
Power button
To turn on this unit
Connect this unit to the iPod.
Press the power button of this unit for about 1 second to turn it on,
or start to play back on iPod.
When this unit turns on, the indicator flashes twice.
Note
If the unit cannot turn on, operate the iPod.
To turn off this unit
To turn off this unit, press and hold this unit’s power button for
about 2 seconds. The indicator flashes once and this unit turns off.
 Tip
Maximum communication time or standby time may vary depending on your
iPod.
Notes
 To listen to music from the headphone jack of the iPod, disconnect this unit from
the iPod.
 While this unit is turned on, it consumes power from the iPod. We recommend
disconnect this unit from iPod when not using the Bluetooth function.
 If the headphone is connected to the iPod while the iPod is playing back, it
consumes power from iPod.
 If you turn off this unit while the iPod is playing back, iPod will power off.
US
 It is not recommended to turn off iPod as the linkage will lost between this unit
and the Bluetooth receiving device.
 Do not press  of the iPod for more than 2 seconds, it will power off this unit
and iPod.
 There is no need to charge this unit as it will receive power from the connected
iPod. It is recommended to check the iPod’s remaining battery before using.
US
Pairing
What is pairing?
Bluetooth devices need to be “paired” with each other beforehand.
Once Bluetooth devices are paired, there is no need for pairing
again, except in the following cases:
 Pairing information is deleted after repair, etc.
 This unit is paired with 9 or more receiving devices.
This unit can be paired with up to 8 Bluetooth receiving device. If a
new device is paired after 8 devices have been paired, the device whose
latest connection time is the oldest among the 8 paired devices is
replaced by the new one.
 This unit is initialized.
All pairing information is deleted (page 20).
Pairing procedures
Turn on the power of iPod.
(Make sure the iPod is in pause mode)
Connect this unit to the iPod (page 8).
Set the Bluetooth receiving device to enter “Pairing in process.”
Place this unit and the Bluetooth receiving device to be paired
together within 1 m (3 ft).
See the operating instructions supplied with the Bluetooth receiving
device.
 Tip
For Sony Wireless Stereo Headset
10
US
Press and hold the POWER button of the bluetooth receiving
device for 7 seconds or more to standby for pairing while the
unit is turned off.
Note
Passcode* of this unit is fixed at “0000”, “1234” or “8888.” Depending on the
Bluetooth receiving device, it may be necessary to input the passcode (in this
case, “0000”, “1234” or “8888”). This unit cannot be paired with a Bluetooth
receiving device whose passcode is not “0000”, “1234” or “8888.”
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”
Press and hold the power button of this unit for more than about 7
seconds to enter “Pairing in process.”
After about 1 second, the indicator will flash twice but keep
pressing the POWER button.
Note
When first power on this unit after initialize, this unit will enter the “Pairing
in process” automatically.
When the indicator of this unit flashes quickly, stop pressing it.
This unit enters “Pairing in process.”
This unit’s indicator status will vary as follows, and pairing is
established with the Bluetooth receiving device.
US
11
Indicator flashes quickly: Pairing in process

Indicator flashes (at about 1-second interval) when responding to
the Bluetooth receiving device: Connectable.
(Paring successful)

Indicator flashes (at about 5-second intervals): Connected
Notes
 “Pairing in process” of this unit is released after about 5 minutes. If pairing is
not established within about 5 minutes, repeat the above procedure from step
4.
 To enter “Pairing in process,” you need to turn off the power of this unit and
turn on the power of iPod first.
When not completed pairing
Repeat the procedure from step 2.
To quit “Pairing in process”
Press and hold the POWER button of this unit for about 2 seconds
to turn off this unit.
 Tip
When paring this unit with a number of Bluetooth receiving devices, repeat steps 3
to 5 for each device individually.
Note
Fueo
rh
qB
tisrgueh
rd
tioleatu
oh
ftd
nitoeicn
vh
ti,e
other side is corresponding with the same profile as this unit. However, even if it is
corresponding with the same profile, functions may differ depending on the
specification of the Bluetooth device.
12
US
On Indicators
Power on
Power off
Flashes once
Pairing
Flashes quickly
Flashes
(at about 1second intervals)
Connected
Flashes twice
Connecting
Status
Listening *1
(flashes twice at
about 5-second
intervals)
With no music *2
(flashes once at
about 5-second
intervals)
Indicator
…
—
—
—
—————
—————
—
—…
—————…
—————…
*1 When press  on the iPod, the music pause. The indicator flashes twice on this
unit. This unit transmit the data of no sound.
*2 When press the pause button on the Bluetooth receiving device, the music pause.
The indicator flashes once on this unit. This unit does not transmit the music.
US
13
Listening to music
Bluetooth Connecting / Playing back
You can listen to music of the iPod connected to this unit on the
Bluetooth receiving device (headset, etc.).
Before starting operation, complete pairing this unit and the
Bluetooth receiving device (page 10).
The Bluetooth receiving device is on standby for connection.
Connect this unit to the iPod then turn on the iPod and start
playback on the iPod.
This unit’s indicator status will vary as follows, and the Bluetooth
connection between this unit and the Bluetooth receiving device
is established.
Indicator flashes twice: Power is on

Indicator flashes (at about 1-second intervals): Connecting
in process

Indicator flashes twice slowly (at about 5-second intervals):
Connected
(Playback will start automatically)
If the Bluetooth connection is not established within 5 minutes,
this unit automatically turns itself off. In this case, turn it on
again by pressing and holding the power button for about
1 second.
Notes
 If the Bluetooth connection cannot be established with the device paired
already, try pairing again.
 If playback cannot start automatically, try start playback on iPod.
 If you press and hold the power button on this unit for about 1 second, this
unit will connect to the iPod and start playback automatically.
14
US
 Tip
You can control the volume on the Bluetooth receiving device.
(The volume of the iPod is not changed.)
Notes
 Even if you control the volume on the iPod, sound from the Bluetooth receiving
device will not change.
 If this unit and the Bluetooth receiving device become out of range and the
Bluetooth connection terminates, repeat the procedure from step 1.
 Playback through a Bluetooth connection may cause noise, sound break, or
playback speed change depending on the location and the usage (page 17).
US
15
Controlling by the Remote
When connecting (Bluetooth connecting) to devices that
support AVRCP (Audio/Video Remote Control Profile)
You can control the iPod using the control button of the Bluetooth receiving device.
For details, see the operating instructions supplied with the Bluetooth devices.
Before starting remote control operation, check that step 1 and 2 of
“Bluetooth Connecting / Playing back” are completed (page 13).
Remote control for the iPod by the Bluetooth receiving device.
Headset with AVRCP
Remote control
(play, pause, etc.)
Notes
 Even if you control the volume on the iPod, the volume of the Bluetooth
receiving device, such as a headset, does not change.
 When operating the iPod by remote control, do not cover this unit with hands.
 You may need to press the play/pause button twice depending on the Bluetooth
receiving device.
 You may need to press the play/pause button of the Bluetooth receiving device
twice when you operate the button on the iPod.
 Operation of the iPod with this unit by the Bluetooth receiving device will vary
depending on the Bluetooth receiving device’s specification.
Do not cover this
unit with hands.
16
US
Additional Information
Precautions
On Bluetooth communication
 Bluetooth wireless technology
operates within a range of about 10
meters (about 30 feet). Maximum
communication range may vary
depending on obstacles (human body,
metal, wall, etc.) or electromagnetic
environment.
Steel cabinet
This unit
Optimal performance
Limited performance
 The aerial of this unit is shown
as illustrated in the dotted line.
The sensitivity of Bluetooth
communication will improve by
turning the direction of the built-in
aerial to the connected Bluetooth
device.
The communication distance shortens
when the obstacles are between the
aerial of the connected device and
this unit.
Location of
built-in aerial
 The following conditions may cause
noise, sound break or playback speed
change.
– When using inside the metal bag.
– When using inside the backpack or
shoulder bag.
– A device using 2.4 GHz frequency,
such as a wireless LAN device,
cordless telephone, or microwave
oven, is in use near this unit.
 Because Bluetooth devices and wireless
LAN (IEEE802.11b/g) use the same
frequency, microwave interference may
occur and resulting in communication
speed deterioration, noise, or invalid
connection if this unit is used near a
wireless LAN device. In such a case,
perform the following.
– Install this unit and Bluetooth device as
near to each other as possible.
– If this unit is used within about
10 meters (about 30 feet) of a wireless
LAN device, turn off the wireless
LAN device.
 Microwaves emitting from a Bluetooth
device may affect the operation of
electronic medical devices. Turn off
this unit and other Bluetooth devices
in the following locations, as it may
cause an accident.
– where inflammable gas is present, in
a hospital, train, airplane, or a petrol
station.
– near automatic doors or a fire alarm.
 This unit supports security capabilities
that comply with the Bluetooth
standard to provide a secure
connection when the Bluetooth
wireless technology is used, but
security may not be enough depending
on the setting. Be careful when
communicating using Bluetooth
wireless technology.
US
17
 We do not take any responsibility
for leakage of information during
Bluetooth communication.
 Connection with all Bluetooth devices
cannot be guaranteed.
– A device featuring Bluetooth
function is required to conform to
the Bluetooth standard specified
by Bluetooth SIG, Inc. and be
authenticated.
– Even if the connected device
conforms to the above mentioned
Bluetooth standard, some devices
may not be connected or work
correctly, depending on the features
or specifications of the device.
 Depending on the device to be
connected, communication may take
some time.
On safety
 Do not drop, hit, or otherwise expose
the unit to strong shock of any kind.
This could damage the product.
 Do not disassemble or attempt to open
any parts of the unit.
On placement
 Do not place the unit in any of the
following locations.
– Direct sunlight, near a heater, or
other extremely high-temperature
location
– Dusty location
– An unsteady or inclined surface
– Location exposed to large amounts
of vibration
– Bathroom or other high-humidity
location
– In a car subject to the direct rays of
the sun
18
US
Notes on using in a car
Do not attempt to connect this unit, or
to operate this unit, an audio output
device or a car radio while driving or
waiting at a traffic signal.
Cleaning
Clean the unit with a soft, dry cloth,
or a soft cloth lightly moistened with
a mild detergent solution. Do not use
any type of solvent, such as alcohol
or benzene, which may damage the
finish.
Others
If you have any questions or problems
concerning this unit that are not
covered in this manual, please consult
your nearest Sony dealer.
Troubleshooting
If you run into any problems using this unit, use the following
checklist and read the product support information on our website.
Should any problem persist, consult your nearest Sony dealer.
Symptom
Cause / Remedy
This unit is not
turned on.
(or turns off
shortly after
turning on.)
 Press and hold this unit power button for about 1
second.
 Check the remaining battery of the iPod. If the
remaining battery is not enough, charge the iPod.
 Reset your iPod.
 If your iPod have no content, add some content to
your iPod.
No sound
 Check the connection between this unit and the
iPod.
 Check that both this unit and the Bluetooth
receiving device are turned on.
 Ensure that this unit is not too far from the
Bluetooth receiving device, or this unit is not
receiving interference from a wireless LAN, other
2.4 GHz wireless device, or microwave oven.
 Pair this unit and the Bluetooth receiving device
again.
Low sound level
 Turn up the volume of the Bluetooth receiving
device as high as possible to the extent that sound
is not distorted. For details on volume adjustment,
refer to the operating instructions supplied with the
Bluetooth receiving device.
Cannot change the  Change the volume on the Bluetooth receiving
volume.
device.
US
19
20
Symptom
Cause / Remedy
Distorted sound
 Turn down the volume of the Bluetooth receiving
device to the point where the sound is no longer
distorted. For details on volume adjustment, refer
to the operating instructions supplied with the
Bluetooth receiving device.
 Turn off the EQ of iPod.
 Ensure that this unit is not receiving interference
from a wireless LAN, other 2.4 GHz wireless device,
or microwave oven.
Sound break,
noise or playback
speed change
 If a device that generates electromagnetic radiation,
such as a wireless LAN, other Bluetooth device(s),
or a microwave oven is nearby, move away from
such sources.
 Remove any obstacle between this unit and other
Bluetooth device or move away from the obstacle.
 Locate this unit and other Bluetooth device(s) as
near as possible.
 Re-position or re-orient this unit.
 Re-position or re-orient other Bluetooth device.
Pairing cannot be
established.
 Locate this unit and other Bluetooth device(s) as
near as possible.
 Check if you input correct passcode (page 11).
Bluetooth
connection cannot
be established
with a device that
has been “paired”
before.
 Locate this unit and other Bluetooth device(s) as
near as possible.
 This unit tries to connect with either of the last
two devices recognized before. If this unit cannot
establish the Bluetooth connection with a paired
device, operate the connecting procedures on the
Bluetooth receiving device or pair the device again.
 Pairing information may be deleted. Pair the device
again.
US
Initializing this unit
You can reset this unit to its default and delete all pairing
information.
Connect the unit to the iPod while pressing and holding the power
button on the unit.
Continue to press and hold the power button for more than about
15 seconds.
The indicator flashes 4 times, and this unit is reset to the default
setting. All pairing information is deleted.
Note
Do not operate your iPod while initializing this unit.
US
21
Specifications
General
Communication System
Bluetooth Specification version 2.0 +
EDR*1
Output
Bluetooth Specification Power Class 2
*3 Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
*4 Codec: Audio signal compression and
conversion format
*5 Subband Codec
Maximum communication range
Supplied accessories
Line of sight approx. 10 m (30 ft)*2
Operating instructions (this book) (1)
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS
Transmission range (A2DP)
20 - 20,000 Hz (Sampling frequency
44.1 kHz)
Compatible Bluetooth Profiles*3
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio/Video Remote
Control Profile)
Supported Codec*4
SBC*5
Terminal
iPod connector (30 pin)
Operating temperature
0 ºC to 35 ºC (32 ºF to 95 ºF)
Dimensions
Approx. 31 × 28 × 8 mm
(11/4 × 11/8 × 11/32 in.) (w/h/d)
(including protruding parts)
Mass
Approx. 5 g (0.2 oz)
*1 Enhanced Data Rate
*2 The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
aerial’s performance, operating system,
software application, etc.
22
US
Design and specifications are subject
to change without notice.
Printed in Malaysia
(1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2007:08:16 10:47:31+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:08:16 17:51:20+09:00
Metadata Date                   : 2007:08:16 17:51:20+09:00
Document ID                     : uuid:394e2dbb-a325-4301-b06f-5e47b2d5a51a
Instance ID                     : uuid:105bb6e5-7b2c-49db-a686-38c6b68531a0
Format                          : application/pdf
Creator                         : Sony Corporation
Title                           : HDX-2013
Has XFA                         : No
Page Count                      : 23
Author                          : Sony Corporation

EXIF Metadata provided by EXIF.tools