Sony Group VGFCP1 Digital Photo Frame User Manual 010COV indd

Download:
Mirror Download [FCC.gov]
Document ID	977181
Application ID	MivIS9iuqbgjTn68mAMS7g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.27kB (953345 bits)
Date Submitted	2008-07-28 00:00:00
Date Available	2008-09-11 00:00:00
Creation Date	2008-07-04 14:27:44
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2008-07-07 08:56:12
Document Title	010COV.indd
Document Creator	Adobe InDesign CS2 (4.0.4)
Document Author:	Administrator

Digital Photo Frame
VGF-CP1
Operating Instructions
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)
-free vegetable oil based ink.
Š 2008 Sony Corporation / Printed in Japan
3-300-630-31 (1)
VGF-CP1 Series 3-300-630-31(1)
VGF-CP1 Series 3-300-630-31(1)
WARNING
 This User Guide and the information contained
Owner’s Record
The model number and serial number are located on the
rear of this unit.
Record the serial number in the space provided below.
Refer to this number whenever you call your Sony dealer
regarding this product.
Model No. VGF-CP1
Serial No.________________________
VGF-CP1 Series 3-300-630-31(1)
herein shall not be reproduced in whole or in part
and shall not be lent to any third parties.
The terms of warranty for this product are defined
in the separate warranty certificate provided with
your home server.
The license agreement for the supplied software
is defined in the software license agreement for
each software application.
Sony Corporation provides no warranty with
regard to the supplied software. In no event shall
Sony Corporation be liable for any incidental,
consequential, or special damages, where based
on tort, contract, or otherwise, arising out of or in
connection with the supplied software.
Sony Corporation reserves the right to make any
modification to this product and the supplied
software. The specifications of this product and
the supplied software are subject to change
without prior notice.
Sony Corporation and the software vendors
reserve the right to terminate or suspend the
network services to the supplied software. In no
event shall Sony Corporation be liable for
inconvenience wholly or partially resulted from
the termination or suspension of the services.
Some functions described in this User Guide and/
or in the help files on the supplied software may
not be implemented due to restrictions imposed
by using such software on this product. Sony
Corporation assumes no liability for
inconvenience resulted from the restrictions.
For C
Sony her
with the
provisio
To obtai
with the
URL add
http://ww
This pro
EN 5502
commer
• Audio
equip
equip
• This p
with t
conne
feet).
• Dispo
• In som
batte
prohi
• Please
ned
n part
efined
d with
ware
t for
shall
l,
ased
f or in
e any
ed
and
n no
om
es.
e and/
may
osed
s.
For Customer in Europe
Sony hereby declares that this equipment is in compliance
with the essential requirements and other relevant
provisions of European Directive 1999/5/EC.
To obtain a copy of the declaration of conformity (DoC)
with the R&TTE Directive, please access the following
URL address.
http://www.compliance.sony.de/
This product also complies with EN 55022 Class B and
EN 55024, for use in following areas: residential,
commercial and light industrial.
• Audio and picture distortion may occur if this
equipment is positioned in close proximity to any
equipment emitting electromagnetic radiation.
• This product has been tested and found to compliant
with the limits set out in the EMC Directive for using
connection cables not longer than 3 metres (9.8
feet).
• Dispose of the battery properly at its end-of-life.
• In some areas the disposal of non-hazardous
batteries in household or business waste may be
prohibited.
• Please use the public collection system.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the
European Union and other
European countries with
separate collection
systems)
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste.
By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for
the environment and human health which could
otherwise be caused by inappropriate waste handling of
the battery. The recycling of the materials will help to
conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualified service staff only.
To ensure that the battery will be treated properly, hand
over the product at end-of-life to the applicable collection
point for the recycling of electrical and electronic
equipment.
For all other batteries, please view the section on how to
remove the battery from the product safely.
Hand the battery over to the applicable collection point
for the recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where
you purchased the product.
VGF-CP1 Series 3-300-630-31(1)
For Customer in U.S.A.
For the State of California, USA only
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Perchlorate Material - special handling may apply, See
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and
receiver.
 Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Tab
www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains perchlorate.
Gett
Abou
Locat
Fr
Ba
Bo
Re
Befor
Ch
Co
In
 Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
Basi
Basic
All cables used to connect peripherals must be shielded
and grounded. Operation with cables connected to
peripherals that are not shielded and grounded may result
in interference to radio and television reception.
Tu
Ab
Pl
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Cr
Pl
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 8 inches (20 cm) between the radiator
and your body (excluding extremities: hands, wrists, feet
and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
Caution
• The socket-outlet shall be installed near the
equipment and shall be easily accessible.
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer. Discard used
batteries according to the manufacturer’s
instructions.
The battery used in this device may present a fire or
chemical burn hazard if mistreated. Do not
disassemble, heat above 140°F (60°C) or incinerate.
Dispose of used battery promptly. Keep away from
children. Do not short circuit.
VGF-CP1 Series 3-300-630-31(1)
Availa
Fr
Fr
Fr
Exam
Exam
Goo
Lo
Up
only
, See
chlorate.
Table of Contents
Example 2: Displaying Photos Stored on
your Computer ...................................................... 36
About This Unit ...........................................................6
Confirming the Computer to Use as a Server
............................................................................................36
Setting up a Server ....................................................38
Displaying Photos on a Computer Set to Use
with This Unit .............................................................39
Getting Started
Locating Controls and Ports................................8
Front ......................................................................................8
Back ........................................................................................9
Bottom ..............................................................................10
Remote Control ...........................................................11
Before Use ................................................................... 12
Checking Accessories ..............................................12
Connecting ....................................................................12
Inserting and Removing Memory Cards .....14
Basic Operation
16
Connection/Settings
41
Connecting to a Wireless Network .............. 41
Checking Type of Access Points ........................41
Setting with AOSS......................................................41
Setting Manually .........................................................44
Options Menu List ................................................. 47
Settings Menu........................................................... 50
Basic Use....................................................................... 16
Turning the Power On .............................................16
About the Home Screen ........................................17
Playing Back Photos Frame of Sample Images
............................................................................................18
Displaying Data with the Browse Screen ....18
Creating a Frame ........................................................20
Playing Back a Frame................................................23
Available Frames ..................................................... 24
Frame Created from Photo Browse Screen
............................................................................................24
Frame Created from Music Browse Screen
............................................................................................26
Frame Created from Information Browse
Screen .............................................................................27
Troubleshooting
53
Troubleshooting ...................................................... 53
Getting Help .............................................................. 60
About Sony’s support options ...........................60
Precautions/Others
61
Specifications ............................................................ 61
Precautions ................................................................. 62
Trademarks.................................................................. 64
Important notices on the software ............. 65
Index ............................................................................... 89
Examples
28
Example 1: Using [Picasa Web Albums by
Google] ....................................................................... 28
Obtaining an Account for “Picasa Web
Albums by Google”.................................................28
Logging in to “Picasa Web Albums by Google”
............................................................................................29
Uploading Photos to “Picasa Web Albums by
Google” from This Unit .........................................31
Displaying Photos from “Picasa Web Albums
by Google”....................................................................33
VGF-CP1 Series 3-300-630-31(1)
Getting Started
You ca
About This Unit
 New
This unit is a Digital Photo Frame for displaying photos with Internet access.
In addition to displaying photos, you can also enjoy music and information by creating various frames (page
18).
 The
brow
 Oth
Note
For home wireless network connection, you will need a subscription to an Internet service provider and a wireless LAN
router.
If you giv
First, con
view the
Picasa Web Albums, etc.
Home server
Memory Stick media, etc.
Home server
Registered RSS information, etc.
You can display the following:
 Photos stored on memory cards such as Memory Sticks.
 Photos stored on your computer or home server through your wireless home network.
 Photos stored on a Web photo organizer or a home server supporting the Remote Home Access
function. In order to use these functions, some network and server settings need to be configured.
 A slide show of your favorite photos, with photo effects and music.
 Photos stored on your home server supporting the Remote Home Access function - even if you are away
from home.
Note
This unit cannot display movies shot by a digital camera or video camera.
You can play back music files:
 Stored on memory cards such as Memory Sticks.
 Stored on your computer through your wireless home network.
Note
This unit cannot play back music files with copyright protection.
Illustrat
VGF-CP1 Series 3-300-630-31(1)
You can display the following information:
 News from Google News UK (UK model) or Google News (USA model)
 The latest information from Web sites broadcasting RSS. You can register to receive RSS feeds in the Web
s (page
browser (Opera) screen (page 47).
 Other way to use
AN
If you give this unit to distant family or friends as a gift, you can send your photos to them through the Web service.
First, configure the network and server settings with this unit, and save the Web photo organizer in frames, then you can
view the latest photos uploaded to the Web service by switching frames with the remote control.
e away
Illustrations and screen images in this manual may differ from the actual product.
VGF-CP1 Series 3-300-630-31(1)
Bac
Locating Controls and Ports
Front
Pr
th
th
 BA
 WLAN (wireless LAN) indicator
Lights up when the wireless LAN turns on.
 STANDBY indicator
Lights up in standby mode.
 New Info indicator
Blinks when receiving new information. Also
can be turned on as a light.
 Remote control sensor
Receives a signal from the remote control.
Pr
pr
 O
Pr
cu
 H
Pr
Pr
of
Pr
on
Po
(PO
VGF-CP1 Series 3-300-630-31(1)
Back
/ENTER button
Press to select options and enter.
While the browse screen or the screen other
than the Options screen is displayed, adjust
the sound volume by pressing
 BACK button
Press to quit setting and return to the
previous screen.
n. Also
 OPTIONS button
Press to display the setting screen of the
current feature.
trol.
 HOME button
 Light sensor
Detects ambient light around the unit.
Note
Keep sharp objects away from the sensor.
 WLAN ON/OFF switch
Press to switch ON/OFF of the wireless LAN.
  (USB) connector
Connects a digital still camera or USB
memory device.
Note
A USB hub should not be connected.
Press to return to the Home screen.
(POWER) button
Press to turn on the power when in power
off or standby mode.
Press to enter standby mode during power
on.
 Hint
Power turns off by pressing and holding the
(POWER) button during power on.
VGF-CP1 Series 3-300-630-31(1)
Bottom
 CF (CompactFlash) slot
Accesses CompactFlash data.
 Media access indicator
Lights up in orange when accessing memory
card data.
  Memory Stick slot
Accesses Memory Stick, Memory Stick PRO,
Memory Stick Duo or Memory Stick PRO Duo
media data.
Rem
 SD memory card slot
Accesses SD/SDHC memory card data.
 6V DC IN port
Connects an AC adapter and to power outlet.
 Speakers
Outputs sound when playing back music.
There is another speaker on the other side.
Pr
of
Pr
on
Pr
 D
Pr
 BA
Pr
pr
Pr
10
VGF-CP1 Series 3-300-630-31(1)
Remote Control
r outlet.
usic.
side.
(POWER) button
Press to turn on the power when in power
off or standby mode.
Press to enter standby mode during power
on.
 buttons
Press to select options in the setting screen.
 DISPLAY button
Press to display the guide.
 BACK button
Press to quit setting and return to the
previous screen.
 VOLUME +/– buttons
Press to adjust the sound volume.
 MUSIC/ button
Press to start / stop music playback.
(ENTER) button
Press to enter your selection.
 OPTIONS button
Press to display the setting screen of the
current feature.
 FRAME +/– buttons
Press to switch frames.
HOME button
Press to return to the Home screen.
11
VGF-CP1 Series 3-300-630-31(1)
3
Before Use
to
Checking Accessories
After unpacking, make sure the following accessories are supplied with your unit. If you find something
missing or broken, contact a local dealer in your area.
 Digital Photo Frame
 Stand
 AC adapter
 Installation CD
 Power cord
 Operating Instructions (this book)
 Remote control
 VGF-CP1 Quick Reference Guide
Th
Connecting
Attach the stand to the unit and connect the AC adapter.
Attach the threaded portion of the stand to the threaded hole at the bottom
left corner on the back of the unit by turning clockwise.
Repla
Connect the AC adapter plug to the unit.
AC adapter
The ferrite core is supplied
with U.K. model only.
12
VGF-CP1 Series 3-300-630-31(1)
3
Connect the power cord to the AC adapter, then connect the power cord plug
to the wall outlet.
To wall outlet
ng
The power turns on and the start-up screen appears.
Remove the insulation sheet from the remote control.
om
Replacing the battery
Release the battery tray.
Replace with a new CR2025 lithium battery with + side up, then restore the
battery tray.
Lithium battery
13
VGF-CP1 Series 3-300-630-31(1)
Inserting and Removing Memory Cards
You can play back photos or music stored on Memory Stick, Memory Stick PRO, Memory Stick Duo or
Memory Stick PRO Duo media, or an SD/SDHC memory card, CompactFlash card or digital still camera with
USB connection or USB memory device.
About
Usable
For det
 Mem
 Th
Inserting and removing memory cards
 Th
Yo
Insert memory card as illustrated below.
ad
 Do
da
 Th
CompactFlash card
Memory Stick media
 Th
 Th
GB
SD/SDHC memory card
When removing Memory Stick, Memory Stick PRO, Memory Stick Duo or Memory Stick PRO Duo media, or
an SD/SDHC memory card, make sure the media access indicator is not lit. Push fully in once and pull out.
When removing a CompactFlash card, make sure the media access indicator is not lit, and pull out.
wo
 SD m
 Th
Attaching and detaching a USB cable or USB memory device
Insert the connector of a USB cable connected to a digital still camera or USB memory device to the  (USB)
connector of this unit. Pull out the connector when detaching.
14
VGF-CP1 Series 3-300-630-31(1)
 Th
fea
 Com
Th
gu
About compatible memory cards
a with
Usable memory cards with this unit are Memory Stick media, SD memory card and Compact Flash.
For details on memory card restrictions, see below.
 Memory Stick media
 The following Memory Stick media can be used with this unit.
Memory Stick / Memory Stick Duo / Memory Stick PRO / Memory Stick PRO Duo
 This unit has a slot for both standard / Duo-size types.
You can insert Memory Stick Duo or Memory Stick PRO Duo media directly into the Memory Sick slot without an
adapter.
 Do not insert Memory Stick and Memory Stick Duo media at the same time. Improper insertion of media may
damage both Memory Stick slot and media.
 This unit does not support the MagicGate feature; data with copyright protection cannot be accessed.
 This unit does not support 8-bit parallel data transfer (high speed data transfer).
 This unit has been tested and found compatible with Sony branded Memory Stick media with a capacity of up to 8
GB; available as of May 2008. However, not all Memory Stick media that meet these specifications are guaranteed to
work.
dia, or
out.
 SD memory card
 This unit has been tested and found compatible only with SD memory cards of a capacity up to 2 GB, and SDHC
memory cards of a capacity up to 8 GB, available as of May 2008. However, not all SD memory cards or SDHC
memory cards that meet these specifications are guaranteed to work.
 The SD memory card slot on this unit does not support the copyright protection and high-speed data transfer
 (USB)
features of SD memory cards and SDHC memory cards.
 CompactFlash card
This unit supports Type I and II CompactFlash cards. However, not all CompactFlash cards that meet specifications are
guaranteed to work.
15
VGF-CP1 Series 3-300-630-31(1)
Basic Operation
Abo
Basic Use
The Ho
Turning the Power On
For the customers purchasing the U.K. model
After connecting the power cord for the first time, user registration requiring screen appears. Please confirm
the requiring contents and advance to the following procedure.
Make sure the stand, power and remote control are ready for use by following
the steps in “Connecting” (page 10).
Selec
press
press
This unit turns on after connecting the power cord.
 Hint
Press
(POWER) to turn the power on when in standby mode.
To set to standby mode
“Standby Mode” reduces power consumption by deactivating the screen.
Press (POWER) on the remote control pointing at the remote control sensor
of this unit.
 Fr
ar
ne
The STANDBY indicator lights up in orange and turns to standby mode.
 Hint
This unit can also be set to standby mode by pressing
(POWER) on the back of this unit.
on
ne
To turn off the power
The steps below show how to turn off the power when removing the AC adapter, etc.
Press
(POWER) on the back of this unit.
The STANDBY indicator lights up in orange and standby mode is set.
Press and hold
(POWER) on the back of this unit.
Pl
or
ca
(p
The New Info indicator blinks and turns off when the power turns off.
Note
 The power cannot be turned off by the remote control.
 Press and hold
(POWER) only when in standby mode. If turning the power off from a mode other than standby mode,
stored data may be discarded.
Note
The web
flash con
 Hin
Press HO
The HOM
complet
16
VGF-CP1 Series 3-300-630-31(1)
ation
About the Home Screen
The Home screen appears by turning the power on. All functions can be selected from the Home screen.
Press .
confirm
wing
Select a frame by
pressing
and
press
(ENTER).
Frame playback starts.
ensor
 Frame list
Displays registered frames. If Shared frames
are created (page 23),
appears when
new photos are uploaded.
Photos
Displays photo files stored in the memory or
on the server. Playing a slide show, creating
new frames, etc., can be performed from the
Options menu (page 45).
Music
Plays back music files stored in the memory
or on the server. Creating a new frame, etc.,
can be performed from the Options menu
(page 46).
Select desired item
by pressing
and
press
(ENTER).
The browse screen or
setting screen appears.
Information
Starts the registered RSS or news provided
from Google News U.K. (for U.K. model)/
Google News (for U.S.A. model) can be
displayed. Creating a new frame, etc., can be
performed from the Options menu (page
46).
Settings
Configures various settings of this unit (page
48).
appears when update information for
software is available. The information can be
checked by selecting [Important messages]
of [ System settings] in [ Settings] (page
50).
Note
y mode,
The web browser equipped with this unit is for mainly checking news or registered RSS information, etc. Some web sites or
flash contents may not be properly displayed or played.
 Hint
Press HOME to return to the Home screen while displaying photos or playing music.
The HOME button does not work while the selection screen (for [Yes], [No] or [Close]) is displayed. Press HOME after
completing selection or confirmation.
17
VGF-CP1 Series 3-300-630-31(1)
2
Playing Back Photos Frame of Sample Images
In
Fo
Frames using sample images and music pre-stored on this unit are used to demonstrate what a frame is. For
details on creating or playing back a frame, see page 18, 21.
Playing back a frame of sample images and music from the Home screen
Press HOME on the remote control.
The Home screen appears.
Select a frame by pressing
on the remote control, and press
(ENTER).
The selected frame starts playing back.
Displaying Data with the Browse Screen
On the browse screen, photos or music stored in the memory or the server can be played back, or RSS
information on the Internet can be displayed. Creating a new frame can also be performed from the browse
screen (page 18).
Se
an
 Hint
In addition to the photo browse screen explained in this section, the music browse screen to play back music files, or the
information browse screen to display RSS information, are also available.
Displaying photos on Memory Stick media
As an example, the following steps show how to display photos on Memoriy Stick media shot by a digital
still camera.
Turn the power on (page 14).
The Home screen appears.
 Hint
When the Home screen is not displayed, press HOME on the remote control.
18
VGF-CP1 Series 3-300-630-31(1)
Th
2
Insert Memory Stick media into this unit (page 12).
Folders or photos on Memory Stick media appear after about 5 seconds.
e is. For
R).
 Hint
When folders of photos do not appear, do the following:
 Press  on the remote control in the Home screen. Select [
Photos] by pressing
 Select [
Memory Stick] by pressing
, and press
(ENTER).
browse
Select a folder including a target photo by pressing
and press
(ENTER).
, and press
(ENTER).
on the remote control,
or the
gital
The photo list appears.
 Hint
 The selected folder may contain subfolders. In this case, repeat step 3 until a target photo appears.
 If [Cannot show the server list.] appears, press
(ENTER) to return to the previous screen.
 Photos in Web services, on other memory cards or computers on a home LAN can be displayed in the same way.
For Web services or computers on a home LAN, you should configure the connection settings (page 26, 39).
19
VGF-CP1 Series 3-300-630-31(1)
4
Select a photo by pressing
, and press
(ENTER).
Se
(E
A photo is displayed.
 Hint
 If you insert a memory card while a screen other than the browse, Settings or Options screen is displayed, the
photo (folder) list of the memory card appears.
 You can save currently displayed photos in the internal memory. For details, see “About internal memory” (page
47).
Al
Se
Creating a Frame
A frame is a collection of your favorite photos or music that can be easily selected.
Once you have created several frames, you can easily change photos or music to match your mood by
selecting one of the frames in the Home screen.
 Hint
In addition to the Photos and Info frame explained in this section, you can also save Music frames to play back music files
and Memories frames to display photos in order by shooting date and time. For details on other frames, see “Available
Frames” (page 22).
Creating a Photos and Info frame
Th
Se
As an example, the following steps show how to create a “Photos and Info” frame to display photos in a
folder.
Display photos in a folder to create a Photos and Info frame by following the
steps in “Displaying Data with the Browse Screen” (page 16).
Press OPTIONS on the remote control.
The Options menu appears.
Th
In
se
20
VGF-CP1 Series 3-300-630-31(1)
3
Select [Create new frame] by pressing
(ENTER).
on the remote control, and press
A confirmation screen for creating a frame appears.
the
page
 Hint
All photos in the folder storing a target photo are saved in the frame.
Select [Yes] by pressing  on the remote control, and press
(ENTER).
by
c files
ble
The “Create new frame” screen appears.
Select [Photos and Info] by pressing
 on the remote control, and press
(ENTER).
the
The “Create Photos and info frame” screen appears.
 Hint
In addition to the Photos and Info frame, you can select a Photo frame (page 23), a Shared frame (page 23) or a
Memories frame (page 23). However, the Shared frame can be selected only when displaying photos in the Web
server on the Internet in step 1.
21
VGF-CP1 Series 3-300-630-31(1)
6
Press  on the remote control.
A setting screen for display information appears.
Se
Th
 Hint
You can set the style, order and interval for displaying photos in the Photos and Info frame. To change the settings,
(ENTER), then select the desired option
select the desired setting by pressing
on the remote control and press
(ENTER).
by pressing
and press
Press  on the remote control.
Play
You can
FRAME
Playin
Th
Se
(E
A confirmation screen for the selected settings appears.
Th
 Hint
The selection to display news information provided from Google News U.K. (for U.K. model)/Google News (for U.S.A.
model) in the Photos and Info frame can be set in this screen. To change the settings, select the desired setting by
(ENTER), then select the desired option by pressing
and press
pressing
on the remote control and press
(ENTER).
Chang
Note
To display News, a wireless network should be set up before connecting the unit to the Internet. For details on the
setting, see “Connecting to a Wireless Network” (page 39).
You can
Pr
ch
Yo
22
VGF-CP1 Series 3-300-630-31(1)
8
Select [Yes] by pressing on the remote control, and press
(ENTER).
The Photo and Info frame created with the selected settings appears.
tings,
d option
Playing Back a Frame
You can play back saved frames from the Home screen, or change frames to another frame by pressing
FRAME on the remote control.
Playing back a frame from the Home screen
Press HOME on the remote control.
The Home screen appears.
Select the desired frame by pressing
(ENTER).
on the remote control, and press
The selected frame starts playing back.
 Hint
r U.S.A.
g by
press
 You can play back the frame by pressing FRAME while displaying a screen other than a frame.
 The operation guide for frames can be displayed by pressing DISPLAY repeatedly.
Changing a frame
You can change a frame to another frame during playback.
n the
Press FRAME on the remote control.
Press FRAME + to change to the next frame up in the frame list in the Home screen. Press FRAME – to
change to the next frame down in the frame list.
 Hint
You can re-arrange the frame order or delete unnecessary frames in the Home screen (page 45).
23
VGF-CP1 Series 3-300-630-31(1)
Photo
Available Frames
You can choose from 8 frame types, and save up to 20 frames.
Display
togethe
 About the icons in this section
: Data in the internal memory can be used.
: Data on memory cards can be used.
: Data in the Web service can be used (Internet connection necessary).
: Data sent from the home server supported by the Remote Home Access function can be used (Internet connection
necessary).
: Data sent from a server using software such as “VAIO Media” can be used (Home LAN connection necessary).
: Data sent from Samba can be used (Home LAN connection necessary).
: Information such as news on the Internet can be displayed (Internet connection necessary).
 Hin
You can
Frame Created from Photo Browse Screen
Note
 If you
From the photo browse screen, you can create 4 types of frames for decorating photos in various ways. To
create a frame, select the desired photo file or folder from the photo browse screen, and select [Create new
frame] in the Options menu (page 45).
If a folder is selected from the list when creating a frame, all photos in the folder currently selected till the
5th level folder are displayed in the frame. If you select a photo from the list when creating a frame, only
photos in the folder where the photo is stored will be displayed in the frame (photos in the sub folder are
not displayed).
Photos and Info frame
the n
 When
 When
 Photo
Share
Display
membe
Displays a photo or photos in the specified folder one after another.
You can also display the current time or registered RSS information with the photos.
 Hin
 Up to
 You c
 Hint
Each time you press DISPLAY, the display changes as follows:
“Photo with analog clock”  “Photo with digital clock”  “Photo only”  “Photo with guide”  “Photo with analog
clock”…
 When
lights
photo
 Each
“Phot
24
VGF-CP1 Series 3-300-630-31(1)
Photos frame
Displays photos in the specified folder one after another with photo effects. You can also play back music
together with your photos by selecting a music file in the internal memory.
ection
 Hint
You can set the transition speed for displaying photos in [Frame settings] (page 45).
Note
 If you change music to [Not specified] in the Options menu while a Photos frame is displayed, changes will be applied
ys. To
te new
the next time the frame is played back.
 When playing a Photos frame, the first photo may be repeatedly displayed.
 When playing a Photos frame, the first photo in the Web service may take time to display.
the
nly
r are
 Photos in the Web service may not be displayed due to slow connection speeds or excessive accesses to the Internet.
Shared frame
Displays photos uploaded in the Web photo organizer by members at the same time. Information from
members such as friends or family can be shared by displaying respective photos at the same time.
 Hint
 Up to 4 members can be registered for 1 Shared frame.
 You can set the style, order and interval for displaying photos in [Frame settings] (page 45).
 When new photos are uploaded to a Web server,
is displayed on the Home screen and the New Info indicator
is displayed to members while displaying Shared frames.
disappears when changing
lights up (page 6, 15).
photos by  on the remote control.
 Each time you press DISPLAY, the display changes as follows:
“Photo with face icon”  “Photo only”  “Photo with guide”  “Photo with face icon”…
25
VGF-CP1 Series 3-300-630-31(1)
Note
Fram
 It may take some time to display the first photo after starting the Shared frame.
 Depending on the number of photos in the folder, it may take some time to display the first photo.
 The more members (up to 4) are sharing the folder at the same time, the longer it takes to display the first photo.
 Photos in the Web photo organizer may not be displayed due to slow connection speed or excessive access to the
Internet.
Memories frame
Displays photos shot or updated within one month from today in the specified folder at random. Photos
shot in “this time some years ago” may be displayed since this unit displays photos regardless of shooting
year. You can recall the days the photos were shot.
In the in
site.
To crea
in the O
 Hin
The relea
News
Display
 Hint
 You can set the screen separation, style and interval for displaying photos in [Frame settings] (page 45).
 Hin
 It is recommended to store as many photos in a single folder as possible.
You can
Frame Created from Music Browse Screen
RSS fr
Display
In the music browse screen, you can create frames to play back music.
To create a frame, select the desired music file or folder from the music browse screen, and select [Create
new frame] in the Options menu (page 45).
Music frame
Plays back your favorite music.
 Hin
 For d
 You c
 Hint
 Only the sleeve images of ID3 tag on music can be displayed.
 To stop playing music, press  on the remote control.
26
VGF-CP1 Series 3-300-630-31(1)
Frame Created from Information Browse Screen
he
In the information browse screen, you can create frames to display information, such as news from an RSS
site.
To create a frame, select the desired RSS from the information browse screen, and select [Create new frame]
in the Options menu (page 45). Up to 3 types of frame are available depending on the RSS.
 Hint
otos
ting
The release date of the latest information from a Web site sending RSS feeds is displayed under each frame title (RSS name).
News frame
Displays RSS information provided from Google News U.K. (for U.K. model)/Google News (for U.S.A. model).
 Hint
You can set the background design in [Frame settings] (page 46).
RSS frame
Displays information from RSS feeds to which you are registered.
eate
 Hint
 For details on RSS registration, see “About RSS registration” (page 47).
 You can set the background design in [Frame settings] (page 46).
27
VGF-CP1 Series 3-300-630-31(1)
Examples
Example 1: Using [Picasa Web Albums by Google]
“Picasa Web Albums by Google” is a Web service on the Internet provided from Google. With this wireless
device, you can display photos on the Internet or upload photos to the Internet using “Picasa Web Albums
by Google”.”
This section shows how to use “Picasa Web Albums by Google.”
Note
For Internet Web service, restrictions, such as numbers of photos to store, may be changed without notice. Check the Web
site of the Web services for the latest information.
Obtaining an Account for “Picasa Web Albums by Google”
 Wit
Th
En
Th
in
Af
You need a computer in order to set up your account.
You need a Google account obtain a “Picasa Web Albums by Google” account.
If you already have an account for Picasa Web Albums for Google, proceed to “Logging in to Picasa Web
Albums by Google” (page 27).
 Hint
Pi
Log
For details on “Picasa Web Albums by Google,” see Google help.
In orde
For det
 Without a Google account
Go to http://www.google.com.
Click [more]-[Photos].
Th
The log-in screen for “Picasa Web Albums by Google” appears.
Click [Create a new Google Account].
The Create a new Google Account screen appears.
Create the Google account and register for “Picasa Web Albums by Google” by
following the on-screen instructions.
After creating the Google account and completing the user registration for “Picasa Web Albums by
Google,” proceed to “Logging in to Picasa Web Albums by Google” (page 27).
28
VGF-CP1 Series 3-300-630-31(1)
Th
mples
e]
eless
bums
 With a Google account
Go to http://www.google.com.
Click [more]-[Photos].
The log-in screen for “Picasa Web Albums by Google” appears.
he Web
Enter [Email] and [Password], and click [Sign in].
The user registration screen for “Picasa Web Albums by Google” appears.
Register for “Picasa Web Albums by Google” by following the on-screen
instructions.
After completing the user registration for “Picasa Web Albums by Google,” proceed to “Logging in to
Picasa Web Albums by Google.”
eb
Logging in to “Picasa Web Albums by Google”
In order to log in, you need a wireless network connection.
For details, see “Connecting to a Wireless Network” (page 39).
Press HOME on the remote control.
The Home screen appears.
Press  on the remote control, select [
(ENTER).
Settings] by pressing
and press
e” by
by
The Settings screen appears.
29
VGF-CP1 Series 3-300-630-31(1)
3
Select [ Server settings] by pressing
(ENTER).
on the remote control, and press
Th
The Server settings screen appears.
Select [Google] by pressing
on the remote control, and press
Se
(ENTER).
If
The account setting screen to connect to “Picasa Web Albums by Google” appears.
Enter the e-mail address and password for the Google account, and enter the
user name for “Picasa Web service” if required.
If t
na
Uplo
Note
If the e-mail address at the account registration is Gmail, do not enter the user name for “Picasa Web Albums,” but
enter the e-mail address and password for the Google account.
Photos
Google
 Hin
 When
 Photo
help
30
VGF-CP1 Series 3-300-630-31(1)
ss
Press BACK on the remote control.
The confirmation screen for testing the server connection appears.
Select [Yes] by pressing  on the remote control, and press
(ENTER).
ER).
If the connection test is successful, the complete screen appears.
 Hint
the
If the connection test fails, double-check the e-mail address and password for the Google account and the user
name for “Picasa Web Service,” and repeat from step 5. In addition, see “Troubleshooting” (page 51).
Uploading Photos to “Picasa Web Albums by Google” from This Unit
but
Photos stored on memory cards, such as Memory Stick media can be uploaded to “Picasa Web Albums by
Google.” This section shows how to upload photos on Memory Stick media inserted into this unit.
 Hint
 When uploading photos stored on a computer, see help of “Picasa Web Albums by Google.”
 Photos uploaded from this unit are registered as “Unlisted”. You need a computer to change the settings. For details, see
help of “Picasa Web Albums by Google.”
31
VGF-CP1 Series 3-300-630-31(1)
5
Uploading photos on Memory Stick media
Display the desired folder or photo to upload by following the steps in
“Displaying Data with the Browse Screen” (page 16).
Se
co
Press OPTIONS on the remote control.
The Options menu appears.
Select [Upload] by pressing
on the remote control, and press
(ENTER).
“U
If a
Disp
The confirmation screen for uploading appears.
Select [Yes] by pressing  on the remote control, and press
(ENTER).
You can
albums
 Hin
For shari
Note
 It ma
 Displ
 Photo
the In
The album selection screen for uploading appears.
Th
(E
Th
32
VGF-CP1 Series 3-300-630-31(1)
5
Select the desired album to upload photos by pressing
(ENTER).
control, and press
on the remote
When uploading a folder, it is not necessary to select an album.
ER).
“Uploading... Please wait” appears, then the complete screen appears.
 Hint
If an album is not created in “Picasa Web Albums by Google,” create a “Digital Photo Frame” album, then upload.
Displaying Photos from “Picasa Web Albums by Google”
You can display photos uploaded to “Picasa Web Albums by Google”, or photos from members sharing
albums.
 Hint
For sharing albums on “Picasa Web Albums by Google,” see help of “Picasa Web Albums by Google.”
Note
 It may take some time to display uploaded photos.
 Displaying thumbnail images in the photo browse screen may take time.
 Photos on “Picasa Web Albums by Google” may not be displayed due to slow connection speed or excessive access to
the Internet.
Press HOME on the remote control.
The Home screen appears.
Press  on the remote control, select [
(ENTER).
Photos] by pressing
, and press
The server list appears.
33
VGF-CP1 Series 3-300-630-31(1)
3
Select [ Picasa Web Albums by Google] by pressing
control, and press
(ENTER).
on the remote
Your nickname on “Picasa Web Albums by Google” or the nicknames of members sharing albums
appear.
Select your nickname by pressing
(ENTER).
on the remote control, and press
The album list appears.
 Hint
To display photos of members sharing albums, sele1ct nicknames of members.
Select the desired album including target photos by pressing
remote control, and press
(ENTER).
The photo list appears.
34
VGF-CP1 Series 3-300-630-31(1)
on the
Se
(E
Th
 Hin
You can
Member
6
ms
Select the desired photo by pressing
(ENTER).
on the remote control, and press
The selected photo is displayed.
 Hint
You can create shared frames (page ...) by using photos on “Picasa Web Albums by Google”.
Members sharing albums can be added to the Shared frames (page 46).
35
VGF-CP1 Series 3-300-630-31(1)
Example 2: Displaying Photos Stored on your Computer
By using your VAIO or your computer with VAIO Media as your server, you can display the photos on the
computer on your wireless frame.
 Hint
If
To use your computer as a server, you should connect your wireless frame to your wireless home network. For details, see
“Connecting to Wireless Network” (page 39).
Confirming the Computer to Use as a Server
When using your VAIO as a server, proceed to “Setting Server” (page 36).
When using a computer other than a VAIO as a server, install “VAIO Media” from the supplied installation CD
by following the steps below.
VAIO
Computer other than VAIO
sc
in
If
in
If
Opera
The foll
Install “VAIO Media”
Compu
Set server
Display photos on the computer set
to use with this unit
Installing “VAIO Media”
OS
Note
 Disconnect any USB devices from the computer being used.
Display
 The disc drive, such as a CD-ROM drive, should be ready for use. In this manual, “CD-ROM drive” is used as a general term
for disc drive. For connection of an external CD-ROM drive, see the operating instructions or Web manual supplied with
the computer or CD-ROM drive.
 Before installing the supplied software, update your Windows to the latest version. All other software should be closed.
Operati
boot or
 Log on as “Computer administrator.”
 For the latest supplied software, see “Getting Help” (page 58) for details, and visit our online support site.
Note
 Oper
Turn the computer on, and start up Windows.
 NTFS
 Oper
Insert the supplied installation CD into the CD-ROM drive.
The file browse window appears.
Note
When Windows XP is being used, follow the steps below to display the file browse window.
On the computer, click [Start] - [My Computer] and right-click [VGF-CP1] then click [Explore] in the pop-up menu.
36
VGF-CP1 Series 3-300-630-31(1)
ter
Click [1-OpenMG.bat], then complete the installation by following the onscreen instructions.
If the “User Account Control” window appears, click [Continue].
the
ls, see
Click [2-VMiS.bat], then complete the installation by following the on-screen
instructions.
If the “User Account Control” window appears, click [Continue].
Click [3-VEP.bat], then complete the installation by following the on-screen
instructions.
If the “User Account Control” window appears, click [Continue].
on CD
Restart your computer.
Operating environment
The following computer environment is required to install this software.
Computer
IBM PC/AT compatible
CPU: Celeron 1.00GHz or more
Hard disk space: 1.2 GB or more
(Disk space is required in proportion to your Windows version and amount of
photo or music files.)
RAM: 256MB or more
Others
OS
Windows XP SP2/Windows Vista SP1
Display
Display high color (16 bits color) or more, 800 X 600 dots or more (1,024 X 768 dots or
ral term
ed with
closed.
CD-ROM drive (supporting digital playback by WDM)
more recommended)
Operation is not guaranteed with an OS other than above, home-built computers, an upgraded OS, multiboot or multi-monitor environment, or Macintosh computers.
Note
 Operation may not be guaranteed for all computers with the recommended environment.
 NTFS format of Windows XP can be used only with standard installation (default setting).
 Operation of system suspension, standby mode, or pausing may not be guaranteed for all computers.
enu.
37
VGF-CP1 Series 3-300-630-31(1)
Setting up a Server
Set a computer to work as a server.
Note
 Registering the computer as a server is required to be connected to the same LAN as this unit.
 Registering the computer as a server requires logging on as a user with administrator privileges, such as “Computer
administrator.” For details, see “VAIO Media help.”
Disp
Th
 Hint
(E
For further details on the operations and the settings of “VAIO Media,” see “VAIO Media help.”
Starting VAIO Media Integrated Server
Click [Start] of the computer, then click [All Program]-[VAIO Media]-[Server
Administration]-[VAIO Media Server Settings].
[VAIO Media Server Settings] starts up.
Th
Click [VAIO Media Integrated Server], then click [Start] when [Start/Stop server]
is [Stop].
Di
OP
wi
VAIO Media Integrated Server starts.
Accessing to computer
Click [Start] of the computer, then click [All Program]-[VAIO Media]-[Server
Administration]-[VAIO Media Server Settings].
Se
re
[VAIO Media Server Settings] starts up.
Click [Access control settings.], then click [Allow other devices on your network
to access this computer.].
The [IMPORTANT] window appears.
Confirm the contents in the window, and click [OK].
38
VGF-CP1 Series 3-300-630-31(1)
Fo
Displaying Photos on a Computer Set to Use with This Unit
Press HOME on the remote control.
The Home screen appears.
ter
Press  on the remote control, select [
(ENTER).
Photos] by pressing
, and press
er
The server list appears.
erver]
Note
Displaying the computer set for use with this unit on the list may take time. If a server list is not displayed, press
(ENTER). The server list
OPTIONS on the remote control, select [Update information] by pressing
, and press
will be renewed.
er
Select the desired server including target photos by pressing
remote control, and press
(ENTER).
on the
twork
Folders or photos on the server appear.
39
VGF-CP1 Series 3-300-630-31(1)
4
Select the folder including the target photo by pressing
(ENTER).
control, and press
on the remote
The photo list appears.
 Hint
 The selected folder may contain subfolders. In this case, repeat step 4 until the target photo appears.
 If [Cannot show the server list] appears, press
Select the photo by pressing
The photo is displayed.
40
VGF-CP1 Series 3-300-630-31(1)
(ENTER) to return to the previous screen.
on the remote control, and press
(ENTER).
Connection/Settings
Connecting to a Wireless Network
By connecting this unit to the wireless network or the Internet, you can play back photos or music stored
on computers or in a Web photo organiser on the Internet.
 Hint
The reception icon is displayed when the information bar is at the top of the screen. The reception icon shows the strength
of the network signal, many bars around the antenna show a stronger signal.
Note
In order to set up your home wireless network connection, you need a wireless LAN router and a subscription to an
Internet service provider.
Checking Type of Access Points
When the access point device (wireless LAN router) supports AOSS, see “Setting with AOSS.” Otherwise, see
“Setting Manually” (page 42).
About AOSS
AOSS™ (AirStation One-Touch Secure System) is a technology developed by Buffalo Technology. The
wireless LAN can be connected with a one-touch operation, and the security is set automatically.
Setting with AOSS
If you use an access point that supports AOSS, set by the following steps.
Press HOME on the remote control.
Press  on the remote control, select [
Settings] by pressing
, and press
(ENTER).
Select [
Network settings] by pressing
on the remote control, and press
(ENTER).
The Network settings screen appears.
Select [Select a connection] by pressing
(ENTER).
on the remote control, and press
41
VGF-CP1 Series 3-300-630-31(1)
5
Select [New connection] by pressing
(ENTER).
on the remote control, and press
“C
Select [Use AOSS] by pressing
on the remote control, and press
(ENTER).
Reception of AOSS setting starts.
Press and hold the AOSS button on the device until the access point indicator
blinks.
 Access point device
Th
Press and hold the AOSS button until
the access point indicator blinks.
10 If
to
 Hint
If t
For details on the AOSS button or indicator, see the operating instructions supplied with the access point device
(wireless LAN router).
42
VGF-CP1 Series 3-300-630-31(1)
Fo
ne
 Screen of this unit
“Communicating AOSS information with the access point...” appears.
Note
 An access point with a conceal setting may not be detected. In this case, select “Enter manually” in step 6, and
NTER).
follow the on-screen instructions.
 The AOSS setting will be canceled automatically if the access point cannot be found within 2 minutes of initiating
reception. Cancellation of the process may take about 1 minute, depending on the network status. In this case,
wait a moment.
Confirm that “Configuring the access point completed” is displayed.
Press
ator
(ENTER) on the remote control.
The setting screen for Proxy appears.
10 If the Proxy setting is unnecessary, press  on the remote control to proceed
to the next step.
A connection name is displayed.
 Hint
vice
If the Proxy setting is necessary, press
(ENTER) on the remote control and select “Use” by pressing
, and press
(ENTER). Then set the address and port number of the Proxy server.
For home use, the Proxy setting is unnecessary. If the Proxy setting is required, consult the administrator of the home
network or your Internet service provider.
43
VGF-CP1 Series 3-300-630-31(1)
11 If the connection name is unnecessary to change, press  on the remote
control to proceed to the next step.
Se
The confirmation screen for settings appears.
 Hint
Normally it is unnecessary to change the connection name.
12 Confirm the setting, and press  on the remote control to proceed to the next
step.
13 Select [Yes] by pressing
 on the remote control, and press
(ENTER).
Connection to the access point is confirmed. When connected properly, “Network connection
completed” is displayed.
Th
Se
Setting Manually
If the access point device does not support AOSS, or AOSS does not work properly, set manually by the
following steps.
Confirm the access point information.
Confirm the following information. For details on the access point device (wireless LAN router), see the
operating instructions supplied with the access point device, or consult the access point provider.
Th
 SSID
Identification for the access point.
 Security type
Security type depends on the access point. With this unit, [None], [WEP], [WPA-PSK (TKIP)], [WPAPSK (AES)] can be selected.
 Encryption key
WEP key or WPA key is required depending on the selected security type.
If s
Th
Se
Display the screen below by following steps 1 to 5 in “Setting with AOSS” (page
39).
Se
If
En
44
VGF-CP1 Series 3-300-630-31(1)
3
Select [Search] by pressing
on the remote control, and press
(ENTER).
next
The access point is detected.
Select an access point by pressing
proceed to the next step.
on the remote control, and press  to
he
see the
er.
The confirmation screen for SSID appears.
 Hint
If several access points are displayed, select SSID of the access point in use.
WPA-
Press  on the remote control to proceed to the next step.
The selection screen for the security type appears.
(page
Select the security type by pressing
proceed to the next step.
on the remote control, and press  to
Select the security type confirmed in step 1.
If selecting other than [None], the screen to enter the WEP key or WPA key appears.
 Hint
When selecting [None], proceed to step 12.
Press
(ENTER) on the remote control to display the software keyboard,
(ENTER).
enter the WEP key or WPA key, and press
Enter the password confirmed in step 1.
45
VGF-CP1 Series 3-300-630-31(1)
8
Press  on the remote control to proceed to the next step.
Opt
The selection screen for address settings appears.
Select [Easy] by pressing
the next step.
on the remote control, and press  to proceed to
You can
Home
The setting screen for connection name appears.
 Hint
Status
Select [Custom] to manually set information such as IP address.
During
10 If it is unnecessary to change the connection name, press  on the remote
control to proceed to the next step.
During
The confirmation screen for settings appears.
 Hint
Normally it is unnecessary to change the connection name.
11 Confirm the setting, and press  on the remote control to proceed to the next
step.
12 Select [Yes] by pressing
Fram
Status
While d
 on the remote control, and press
(ENTER).
(except
Connection to the access point is confirmed. When connected properly, “Network connection
completed” is displayed.
Brow
Status
While p
46
VGF-CP1 Series 3-300-630-31(1)
Options Menu List
ed to
You can display the Options menu by pressing OPTIONS while a screen is displayed.
Home screen
Status
Options/Descriptions
During frame selection
[Move up][Move down][Move to top][Move to end]: Rearranges the frame
order in the list by moving the selected frame.
During music playback
[Delete frame]: Deletes the frame currently selected.
[Track being played]: Displays the music browse screen of the music being
played.
Frame screen
next
Status
Options/Descriptions
While displaying frame
(except for Music frame)
[Frame settings]: Configures the various settings for frames.
[Delete from shared frame]: Deletes members registered in the shared
frame currently being played.
[Start Web browser]: Displays Google News U.K. (for U.K. model)/Google
News (for U.S.A. model), or the registered RSS.
Browse screen
Status
Options/Descriptions
While photo browsing
[Update information]: Updates the list of external memory or servers.
[Connection test]: Performs the connection test for memory or servers.
[Play]: Plays all photos in the folder currently selected as a slide show
(Background music cannot be selected).
[Create new frame]: Creates a new frame to display photos.
[Register to internal memory]: Registers the photo currently displayed in
internal memory. For details, see “About internal memory” (page 48).
[Upload]: Uploads folders or photos in the external memory to the Web
service on the Internet.
47
VGF-CP1 Series 3-300-630-31(1)
Status
Options/Descriptions
While photo browsing
[Background photo settings]: Sets the photo currently displayed to the
 The d
appl
background image of the Home screen or Settings screen.
 Appr
[Add to shared frames]: Adds the members (folders) currently selected to
 Appr
the created Shared frame.
 Sam
[Delete photos]: Deletes photos in the internal or external memory (folders
delet
Setti
 You c
cannot be deleted).
While music browsing
About
[Update information]: Updates the list of external memory or servers.
[Connection test]: Performs the connection test for memory or servers.
[Register to/Delete from internal memory]: Registers/deletes the music file
currently playing to/from internal memory. For details, see “About internal
memory” (page 47).
[Create new frame]: Creates a new frame to play a music file.
While information
[Connection test]: Performs a connection test for the wireless network.
browsing
[Delete RSS]: Deletes the registered RSS from the list.
[Create new frame]: Creates a new frame to display RSS information.
Web browser (Opera) screen
Status
Options/Descriptions
While displaying Web
[Input address]: Displays the Web site by entering the address directly.
browser (Opera)
[Bookmarks]: Displays the target Web site from the bookmark list. You can
About
Follow
add/delete up to 20 favorite sites in the bookmark list.
[Zoom]: Zooms in/out the Web site.
[Register RSS]: Registers an URL as RSS (up to 20) if the Web site currently
RSS] screen of the information browse screen.
[Delete cookies]: Deletes all cookies.
[Exit Web browser]: Closes the Opera browser.
an
Se
Se
Se
Th
displayed is RSS. The registered RSS is displayed in the list on the [Registered
Th
If t
aU
[R
Th
48
VGF-CP1 Series 3-300-630-31(1)
About internal memory
he
 The date registered to the internal memory is applied to the file name (example: “0801171535.jpg” is
applied to a JPEG file registered at 15:35 of January 17, 2008).
 Approximately 85MB of memory is available for registering photos (depending on the photo size).
d to
 Approximately 15MB of memory is available for registering music. Up to 3 music files can be registered.
 Sample music or photos are pre-registered in the internal memory. To increase the available memory,
folders
delete these sample files. The deleted sample files can be restored by setting [ Initialization] in [
Settings] (page 50).
 You cannot transfer or copy photos or music stored in the internal memory to an external memory.
rs.
About RSS registration
sic file
ernal
Follow steps below for RSS registration
Press HOME on the remote control.
The Home screen appears.
rk.
u can
ntly
y.
Press  on the on the remote control, select [
and press
(ENTER).
Information] by pressing
Select Google News U.K. (for U.K. model)/Google News (for U.S.A. model) by
pressing
on the remote control and press
(ENTER),then proceed to the
next step.
Select a pre-registered RSS site by pressing
press
(ENTER).
Select the desired RSS site by pressing
on the remote control, and
, and press
(ENTER).
The RSS site is displayed with the Web browser (Opera).
gistered
Display a ULR to register the RSS site on the Web browser.
 Hint
If the URL cannot be followed by a link, select [Input address] in the Options menu and press
a URL to register the RSS site.
(ENTER), and enter
Press OPTIONS on the remote control to display the Options menu, select
[Register RSS] by pressing
and press
(ENTER).
The registered RSS is displayed on a list on the [Registered RSS] screen of the information browser.
49
VGF-CP1 Series 3-300-630-31(1)
Da
Settings Menu
You can make more detailed settings in the Settings screen.
You can display the Settings screen by pressing  in the Home screen, selecting [
and pressing
(ENTER).
Item
Settings] by pressing
Set Man
Set auto
Network settings
Item
Options/Description
Select a connection
Creates a registered wireless LAN connection from the list. Or selects a new
Date fo
wireless LAN connection (page 39). You can set up to 5 wireless LAN
connections.
Time fo
Edit connection settings
Edits the created wireless LAN connection settings, or create a new wireless
LAN connection (page 39). You can set up to 5 wireless LAN connections.
Time zo
Delete a connection
Deletes the created wireless LAN connection from the list.
Dayligh
Set a cl
Server settings
Item
Options/Description
Google
Sets up the account for connecting to Web services. Enter the account
information of your computer (page 28).
Remote Home Access
Sets up the account for the Remote Home Access server (up to 5 accounts).
Samba
Sets up the account for the Samba server (up to 5 accounts).
Sc
Item
Photo d
Brightn
Demon
Tim
Item
Set Star
Set Sto
50
VGF-CP1 Series 3-300-630-31(1)
Date & time settings
Item
ssing
Options/Description (underlined option is the default setting)
Set Manually
Sets up the date and time manually.
Set automatically
Connects to the Internet time server and updates the date and time
automatically when set to [On]. You can also change the Internet time server.
The default setting is [Off ].
To use this feature, connect to a wireless LAN (page 39). When the date and
time are set in [Set Manually], [Set Automatically] is set to [Off ].
ew
Date format
Sets up the date format.
[YYYY/MM/DD], [MM/DD/YYYY], [DD/MM/YYYY]
Time format
ess
Sets up the time format.
[12-hour], [24-hour]
s.
Time zone
Sets up the time zone. The default setting differs depending on the area
Daylight saving time
Sets the clock ahead one hour when set to [On]. The default setting is [Off ].
Set a clock ahead
Sets the clock ahead up to 30 minutes in 1-minute increments. The setting is
setting.
applied to the clock on frames and the timer.
Screen display
nts).
Item
Photo display position
Options/Description
Sets up the photo display position on the screen while playing a frame. The
photo is displayed in the center of the screen in its original size when [Entire
photo] is selected. The default setting is [Fit to screen].
Brightness adjustment
Demonstration
Adjusts the screen brightness in 11 levels. The default setting is [10].
Starts the demonstration when no operation is performed for more than 1
minute while the Home screen is displayed (photos and music demonstration
are played). The default setting is [Off ].
Timer settings
Item
Options/Description
Set Start Timer
Starts playing a frame at a specified time. Up to 3 timer settings can be created.
Set Stop Timer
Sets this unit to go into standby mode at a specified time.
51
VGF-CP1 Series 3-300-630-31(1)
Trou
System settings
Trou
Item
Options/Description (underlined option is the default setting)
Device name
Registers a device name for this unit.
Auto power on/off
Turns the power on automatically when the ambient light around this unit
If a prob
supplie
suppor
reaches a certain level, and this unit goes into standby mode automatically
when the ambient light drops below a certain level. The default setting is [Off ].
New info indicator
Sets up the lighting pattern of the New Info indicator (always off in standby mode).
[Always on (with new arriv.)], [Auto on/off (with new arriv.)], [Always on], [Always off ].
System information
Displays [MAC address], [IP address] and [About software].
Internal memory info
Displays the current usage of the internal memory.
Important messages
Turni
Condit
The pow
on.
Displays update information and some other important information. When
updating is completed, the power of this unit turns off automatically. After
confirming the power is turned off, disconnect the AC adapter, and leave for
more than 30 seconds, then connect the AC adapter again.
About VGF-CP1
Displays copyright and trademark information.
Displ
Condit
[Canno
Initialization
displaye
Item
Options/Description (underlined option is the default setting)
Initialize system
Restores the system to the factory default.
Initialize settings
Returns the settings to their factory default.
All registered frames are deleted, and sample frames are restored to the defaults.
Initialize internal memory
Resets internal memory to the factory default.
All registered photos and music files are deleted, and sample photos and music
files are restored to the defaults.
Initialize cache
Resets the cache memory to the factory default.
Data stored in the cache memory is deleted; however, photo files remain undeleted.
When displaying photos on this unit, the photo data will be stored in the cache
memory temporarily. Once a photo is recognized as unknown data, this photo
will be displayed as unknown data next time.
Perform [Initialize cache] for the following cases:
“Not Authorized” is displayed immediately after uploading photos to the
Internet Web service.
Despite rotating a photo in the Internet Web service, the photo is displayed
not rotated.
The correct photo is not displayed after assigning the identical file name to
another photo.
52
VGF-CP1 Series 3-300-630-31(1)
[Canno
displaye
Troubleshooting
Troubleshooting
If a problem occurs, check the following tables with the operating instructions and/or electronic manuals
supplied with your computer. In addition, see “Getting Help” (page 58) for details, and visit our online
support site.
Off ].
e).
Turning on the power
Condition
Cause/Remedy
The power cannot be turned
 Make sure the AC power adapter is securely plugged into AC IN on the
on.
unit and the wall outlet (page 10, 11).
 Static electricity may cause a malfunction. In this case, disconnect the
AC power adapter and leave for more than 30 seconds, then connect
the AC power adapter again.
or
Displaying data on the browse screen
Condition
Cause/Remedy
[Cannot show the server list] is  This unit may not be connected to a memory or server properly.
displayed.
Perform the connection test.
 Display the server list in [
Photos] or [
Music], and select a
memory or server you want to test, and then press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
aults.
 The connection test starts. Follow the on-screen instructions if
connection fails.
music
 Check the server settings on this unit when the Web service, Samba or
Remote Home Access server is selected.
 A folder storing no photos/or music files cannot be opened.
eted.
ache
oto
[Cannot show photos] is
 Some photo files may not be displayed depending on the file format.
displayed.
 Some photo files may not be displayed depending on the file size.
 Some photo files may not be displayed if the files have been edited on
a computer.
ayed
e to
53
VGF-CP1 Series 3-300-630-31(1)
Condition
Cause/Remedy
Condit
[Cannot play tracks] is
 Some music files may not be played back depending on the file format.
Photo d
displayed.
[Cannot show the item] is
 This unit may not be connected to a network properly. Perform the
displayed.
connection test.
 Select [
Information] in the Home screen, and press
(ENTER).
 Press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
! The connection test starts. Follow the on-screen instructions if
connection fails.
Web service is not displayed in  The server may not be set. Check the Server settings.
Music d
It takes
Sound
playbac
the list.
The server using a software,
 This unit or the server is not connected to the network. See the cause/
such as “VAIO Media” is not
remedy of “[A connection error occurred] is displayed.” in “Connecting
displayed in the list.
to Wireless Network” (page 55).
 A server is not active. Check the following:
" The server is turned on.
" The server status ([Start/Stop server]) is [Start].
" This unit is registered with the server. For registration, refer to the
Help section of the server software in use or the operating
instructions supplied with the server.
 The server may not be recognized when this unit is turned on before
Playi
Condit
[Canno
displaye
[Canno
displaye
[Canno
displaye
turning on the server. Select [Update information] in the Options menu
to update a list.
 If a computer is used as a server, check the following:
" The computer may be unstable. Restart the computer.
" This unit may not be connected to the computer with the Internet
connection fire wall (ICF) function on. For fire wall information, see
the Help section for the security software in use.
External memory is not
 The external memory may not be inserted correctly. Make sure the
displayed in the list.
[Cannot use this device] is
displayed.
external memory is inserted in the correct direction.
 A USB device other than a Mass Storage cannot be used with this unit.
A USB device that is not Mass Storage Class cannot be used.
[Canno
displaye
Shared
54
VGF-CP1 Series 3-300-630-31(1)
format.
Condition
Cause/Remedy
Photo data is not recognized.
 Unsupported photo files cannot be recognized.
 Photos uploaded to the Web service on the Internet take time to be
displayed with this unit. Wait for a while, and display the browse screen.
the
 When a digital still camera is connected to this unit with a USB cable,
the digital still camera may not be set to Mass Storage Class. For the
NTER).
Mass Storage Class setting, see the operating instructions supplied
with the digital still camera.
Music data is not recognized.
if
cause/
cting
the
 Unsupported music files cannot be recognized.
It takes time to display photos.  The frequency bandwidth of the wireless network may not be
Sound interrupts during
sufficient. Place the access point device near this unit without
playback.
obstacles in-between.
Playing back a frame
Condition
Cause/Remedy
[Cannot show photos] is
 This unit may not be connected to a memory or server properly.
displayed.
Perform the connection test.
[Cannot play tracks] is
 Display the server list in [
displayed.
[Cannot show the item] is
displayed.
efore
Photos] or [
Music], and select a
memory or server you want to test, and then press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
 The connection test starts. Follow the on-screen instructions if
s menu
connection fails.
 When a server using software, such as “VAIO Media” is specified to the
frame, see the cause/remedy of “The server using a software, such as
“VAIO Media” is not displayed in the list” in “Displaying data on the
ernet
browse screen” (page 52).
n, see
 External memory specific to the frame may not be inserted correctly.
he
 The name of the folder specific to the frame may have been changed,
Make sure the external memory is inserted in the correct direction.
or the folder specific to the frame may have been deleted. Check the
folder stored in the memory or server.
s unit.
[Cannot show photos] is
displayed for members in a
 A member might have deleted the account of the Web service on the
Internet.
Shared frame.
55
VGF-CP1 Series 3-300-630-31(1)
Condition
Cause/Remedy
Conn
[Cannot show photos.] is
 Photos shot or updated within one month from today can be
Condit
displayed in the Memories
displayed in the Memories frame. The last update date, usually the date
frame.
the photo was shot, may be updated depending on the way the photo
[A conn
is displa
data is imported. If the photo data is edited, the date the photo was
edited will become the last updated date.
Photos are not switched
 Photos may not be switched at the specified interval time immediately
after playing back the frame. Wait for a while or press  to switch to the
automatically in the Photos
and Info, Shared and Memory
frames.
next photo manually.
 Photos are not switched automatically when
is displayed in
Shared frame. Press  to switch to the next photo manually.
disappears and photos are switched automatically.
is not displayed in the
 Photos uploaded to a Web service on the Internet take time to be
displayed on the unit. Wait for a while, then play back the frame.
Shared frame.
The clock does not work
 Date and time may be reset with the unit disconnected from the AC
properly in the Photos and Info
adapter. Set the date and time by [
frame.
News is not displayed in the
Date and time settings] in
Settings].
 This unit may not be connected to the network. See the cause/remedy
Photos and Info frame.
of “[Cannot show the item] is displayed.” in “Playing back a frame” (page
[Canno
displaye
53).
The same photo is displayed
 As a system restriction, the same photo may be displayed repeatedly
repeatedly in the Photos
immediately after starting the frame. This is not a malfunction.
frame.
Start timer does not work
 The start timer may be set to [Off.] Check the start timer setting.
properly.
 The frame specified by the start timer may have been deleted. If
[The co
Unable
displaye
deleted, the start timer setting is reset to the factory default.
 The start timer may not work if the Settings, Options or browse screen
is displayed at the time the start timer is set.
Stop timer does not work
 The stop timer may be set to [Off.] Check the stop timer setting.
properly.
 The stop timer may not work if the Settings, Options or browse screen
is displayed at the time the stop timer is set.
[Failed t
displaye
Auto up
does no
56
VGF-CP1 Series 3-300-630-31(1)
Connecting to Wireless Network
he date
e photo
Condition
Cause/Remedy
[A connection error occurred]
 This unit is not connected to the network. Check the following.
is displayed.
was
" The WLAN ON/OFF switch is set to ON.
" The network setting is correct.
" All cables are connected securely.
" The connected device(s), such as the access point device (wireless
diately
h to the
LAN router), is turned on.
" The cable type (straight or cross) is correct.
 The MAC address is required for network connection depending on
the access point setting. The MAC address can be checked in [System
information] of [
System settings] in [
Settings].
 The frequency bandwidth of the wireless network may not be
be
sufficient. Place the access point device or wireless adapter near this
unit without obstacles in-between.
e AC
 A device, such as a microwave, around this unit may cause interference,
and result in poor communication.
emedy
” (page
tedly
[Cannot find an access point] is  This unit is not connected to the network. See the cause/remedy of “[A
displayed.
connection error occurred] is displayed.” in “Connecting to Wireless
Network.”
[The connection test failed.
 The server setting may not be correct. Check the setting.
Unable to log on to a server] is  This unit may not be connected to the network. See the cause/remedy
displayed.
of “[A connection error occurred] is displayed.” in “Connecting to
Wireless Network.”
 This unit may not be connected properly to the server. Perform the
connection test.
 Display the server list in [
screen
Photos] or [
Music], and select a Web
service to test, and then press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
 The connection test starts. Follow the on-screen instructions if
screen
connection fails.
[Failed to update the clock] is
displayed.
Auto updating of the clock
does not work properly.
 The Internet time server may be unstable. Wait for a while to restart
updating.
 This unit may not be connected to the network. See the cause/remedy
of “[A connection error occurred] is displayed.” in “Connecting to
Wireless Network.”
 [Set automatically] of [
Date and time settings] may be set to [Off ].
Check the setting (page 49).
57
VGF-CP1 Series 3-300-630-31(1)
Options
Condition
Condit
Dark sc
Cause/Remedy
[Upload] is not displayed in the  [Upload] is displayed only when browsing the external memory. Only
Options menu.
[Delete photos] is not
photos stored in the external memory can be uploaded to the Web
Does n
service on the Internet.
operati
 [Delete photos] is displayed only when browsing the internal or
displayed in the Options
external memory. Only photos stored in the internal or external
menu.
memory can be deleted.
[The upload failed] is
 This unit may not be properly connected to a memory or server.
displayed.
Perform the connection test.
[Registration failed] is
 Display the server list in [
displayed.
Photos] or [
Music], and select a
memory or server to test, and then press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
connection fails.
 This unit may not be connected to a memory properly. Perform the
displayed.
connection test.
 Display the server list in [
Photos] or [
Music], and select a
memory to test, and then press OPTIONS.
 Select [Connection test] in the Options menu, and press
(ENTER).
 The connection test starts. Follow the on-screen instructions if the
connection fails.
 If the Memory Stick media or SD/SDHC memory card is equipped with
a write-protect switch, the switch may be set to the lock position. Set
the switch to the unlock position.
[Cannot register this track] is
displayed.
 Some music files may not be stored depending on the file format. In
this case, store the file in MP3 format.
Others
Condition
Cause/Remedy
Does not accept operation.
 This unit may not work properly due to static electricity. Disconnect the
Does not work properly.
AC adapter, and leave for more than 30 seconds, then connect the AC
adapter again.
The remote control does not
 The battery may be inserted in the wrong direction. Insert the battery
work.
58
VGF-CP1 Series 3-300-630-31(1)
The We
properl
The vol
 The connection test starts. Follow the on-screen instructions if the
[The deletion failed] is
Music s
in the correct direction (page 11).
adjuste
Condition
Cause/Remedy
Dark screen. Poor visibility.
 Adjust the brightness by [Brightness adjustment] of [
in [
Only
Web
Does not accept MUSIC
operation.
Screen display]
Settings] (page 49).
 Pressing MUSIC will not work while the Settings or browse screen is
displayed. To play back music, press MUSIC after closing the Settings or
browse screen.
 If MUSIC is pressed while paused, MUSIC is unavailable until music
starts playing back. Press MUSIC after starting playback.
Music stops during playback.
 Music playback stops automatically when the Settings or browse
screen is displayed. Pressing MUSIC does not work until playback starts.
Press MUSIC after starting playback.
The Web site is not displayed
 The Web site may not be displayed properly depending on the site.
properly.
The volume cannot be
if the
adjusted.
 The volume can be adjusted only when playing back music. Adjust the
volume during playback.
the
if the
d with
n. Set
at. In
ect the
he AC
attery
59
VGF-CP1 Series 3-300-630-31(1)
Preca
Getting Help
Spe
This section provides information on how to get help and support from Sony, and troubleshooting tips for
your Digital Photo Frame.
Display
About Sony’s support options
Speake
Memo
Sony provides several support options for your Digital Photo Frame. If you have any questions regarding
your Digital Photo Frame, refer to the following:
 This manual explains how to use your Digital Photo Frame.
Suppo
Suppo
For customers in the United States and Canada
 The Sony Customer Information Service Center offers information about your VAIO
computer and other Sony products that work with your computer. To contact Sony
Customer Information Service Center, call
1-888-4SONYPC (1-888-476-6972).
 Sony Computing Support provides instant access to information on commonly
encountered problems. Type a description of the problem and the Knowledge Database
searches for corresponding solutions online.
You can visit Sony Online Support at:
http://www.sony.com/pcsupport.
Extern
Interna
(availa
Wirele
Target
Dimen
For customers in Europe
Mass
 VAIO-Link. For addresses and telephone numbers, refer to
http://www.vaio-link.com/
For further service support information, refer to the Warranty/Customer support
information.
Power
Power
For customers in other countries and regions
 VAIO Website provides Frequently Asked Questions and solutions.
http://www.vaio-online.sony.com/
*1 Maxim
*2 WAV
*3 Appro
*4 AOSS
Design a
Other sy
although
60
VGF-CP1 Series 3-300-630-31(1)
Precautions/Others
Specifications
ps for
Display
Size: 7 inch
Resolution: 800 x 480 dots
Color: Max. 16.77M
Speaker maximum output
L/R 1.6W
Memory cards
Memory Stick, Memory Stick PRO, Memory Stick Duo, Memory Stick PRO Duo, SD/
ing
SDHC memory card, CompactFlash card (CF)
Supported photo file
JPEG, JPEG Progressive*1, BMP*1, PNG*1, PNG Progressive*1, GIF*1, GIF Progressive*1
Supported music file
MP3, WAV*2
External connection terminal
USB terminal (1)
Internal memory
Approx. 100MB*3
(available for user)
Wireless connection
IEEE 802.11b/g (WEP (64bit/128bit)/WPA-PSK (TKIP/AES)) Wireless LAN system
supporting AOSS*4
se
Target computer
WindowsÂŽ XP SP2, Windows VistaÂŽ with SP1-based computer, VGF-HS1 series
Dimension
177 (w) x 133.5 (h) x 33 (d) mm (without stand)
177 (w) x 131 (h) x 103 (d) mm (when placing with stand)
Mass
530g (with stand)
Power consumption
5.5W to 12W
3.1W (in standby mode)
Power (AC adapter)
Input: AC 100V-240V, 0.5A, 50/60Hz
Output: DC 6V, 2.5A
*1 Maximum file size is 3MB.
*2 WAV files cannot be copied to the internal memory.
*3 Approximately 85MB is available for photo files, and approximately 15MB for music files.
*4 AOSS™ is an easy connection and setting technology developed by Buffalo Technology.
Design and specifications are subject to change without notice.
Other system and product names used herein are registered trademarks or trademarks of their respective manufacturers,
although the ™ and ® marks are not used in the text.
61
VGF-CP1 Series 3-300-630-31(1)
Precautions
On handling your unit
 Do not lift or carry the unit by holding the stand
only. Inclination of the unit may cause a
malfunction.
Do not drop or subject the unit to excessive
shock. Doing so may result in data loss, or cause
a malfunction.
Do not place the unit in locations subject to
extreme changes in temperature such as in
direct sunlight or near a heater. Doing so may
cause a malfunction.
Do not insert any metallic object, such as a
paper clip, into the unit.
Do not place the unit in a location subject to
mechanical vibration, or in an unstable position.
Do not use this unit in a location subject to
excessive dust since this unit is manufactured
using extremely high precision technology.
Doing so may cause a malfunction.
Do not use this unit in a high humidity location.
Do not use the unit in a poorly ventilated
location.
Do not place the unit near objects that are
magnetized, or that generate electromagnetic
energy. Doing so may cause a malfunction.
On the LCD screen
On ha
 The LCD screen is manufactured using
Keep th
Memor
 Do n
your
extremely high-precision technology so over
99.99% of the pixels are operational for effective
use. However, some tiny black and/or bright
dots (white, red, blue or green) may appear on
the LCD screen. These dots are a normal result
of the manufacturing process, and do not affect
operation or signify malfunction.
 Do not place or drop objects on the screen, or
do not lean on the screen with your hands or
elbows.
 Do not scratch the screen with a cutter or other
sharp tool.
 Do n
than
 Appl
the M
On moisture condensation
If the unit is brought directly from a cold to a
warm location, moisture may condense inside or
outside the unit. In this state, your unit may not
operate correctly, and may cause a malfunction. If
moisture condensation occurs, wipe off any
moisture with a dry soft cloth. If the screen gets
cold, turn off the unit and wait about an hour for
any moisture to evaporate.
 Use t
Stick
 Do n
Mem
 Do n
 Do n
 Do n
subje
– Ex
pa
– Di
– Hi
On us
 Be ca
On parts replacement
This unit includes parts with a finite life
expectancy; deterioration of such parts will
depend on usage environment and frequency.
Replace worn parts if significant performance
degradation occurs as a result.
If you have any questions or problems concerning
your unit, consult the local dealers in your area.
See “Getting Help” (page 58) for details, and visit
our online support site.
62
VGF-CP1 Series 3-300-630-31(1)
writi
Duo.
 Make
facin
Mem
Mem
 Do n
Duo
the M
over
ffective
ght
ear on
result
t affect
On handling Memory Stick media
On the AC adapter
Keep the following in mind to protect data on
Memory Stick media.
 Do not touch a Memory Stick’s connector with
your finger or metallic objects.
 For your safety, do not use the AC adapter other
than the AC adapter supplied with your unit.
 Do not use an electronic transformer (travel
converter), as this may cause a malfunction.
 For your safety, do not use an AC adapter with a
damaged cable.
On using the software
en, or
ds or
r other
 Do not attach a label to a Memory Stick other
than the one supplied.
 Apply the label in the prescribed position on
the Memory Stick.
 Use the storage case supplied with the Memory
de or
not
tion. If
gets
ur for
The software supplied with your unit is provided
under the royalty contract and the license
agreement, and unauthorized copying of the
software by lending or borrowing is strictly
prohibited by law. Be sure to read the software
license agreement carefully before using the
software.
Stick media when carrying or storing.
 Do not bend, drop, or apply strong shock to a
Memory Stick.
 Do not disassemble or modify a Memory Stick.
 Do not let a Memory Stick become wet.
 Do not use or store a Memory Stick in a location
subject to:
– Extremely high temperatures, such as in a car
parked in the sun
– Direct sunlight
– High humidity or highly corrosive atmosphere
On using Memory Stick Duo media
 Be careful not to apply excessive force when
writing on the memo area of a Memory Stick
Duo.
 Make sure the Memory Stick Duo is inserted
facing in the correct direction. If you insert a
Memory Stick Duo in the wrong direction, the
Memory Stick slot and media may be damaged.
 Do not insert a Memory Stick and Memory Sick
Duo at the same time. Doing so may damage
the Memory Stick slot and media.
On cleaning your unit
 Before cleaning, turn off the unit, and then
disconnect the power cord from the wall outlet.
 Wipe off any surface dirt or dust with a dry
cloth.
 Be sure to wipe off the dirt or dust with a soft
and dry cloth. If the surface is soiled, clean with
a soft cloth lightly moistened with water, and
then wipe the surface with a dry soft cloth.
 Do not use chemical cleaners containing
benzene, acetone, alcohol or thinner as they
may damage the surface.
 When using a chemical cloth, follow its
instructions.
On cleaning the LCD screen
 Avoid touching the LCD screen as it has a
special coating.
 When cleaning, use a dry soft cloth and lightly
wipe off.
 If the surface is soiled, clean with a soft cloth
lightly moistened with water, and then wipe the
surface with a dry soft cloth.
 Do not use a chemical cloth or chemical
cleaners containing benzene, acetone, alcohol
or thinner as they may damage the surface
treatment of the screen.
63
VGF-CP1 Series 3-300-630-31(1)
Trademarks
Imp
 VAIO is a trademark of Sony Corporation.
Thank y
Before
The beg
the cus
, “Memory Stick,” “Memory Stick Duo,” “MagicGate,” “MagicGate Memory Stick,” “Memory Stick
PRO,”“Memory Stick PRO Duo,” and Memory Stick logo are trademarks or registered trademarks of Sony
Corporation.
Microsoft, MS-DOS, Windows, and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
SD Logo is a trademark.
SDHC Logo is a trademark.
This VGF-CP1 contains Adobe® Flash® Lite™ player software and under license from Adobe Systems
Incorporated,
Adobe Flash Lite Copyright Š 2003-2007 Adobe Systems Incorporated. All rights reserved.
Adobe, Flash and Flash Lite are trademarks of Adobe Systems Incorporated in the United States and
other countries.
AOSS™ (AirStation One-Touch Secure System) is the trademark of BUFFALO INC.
Copyright Š 2003-2008 Google Inc. All rights reserved.
Picasa, Picasa Web Albums and the Picasa logo are trademarks of Google Inc.
Picasa Web Albums is a free photo sharing service from Google.
Contains iType™ rasterizer and TrueType font from Monotype Imaging Inc.
MonotypeÂŽ is a trademark of Monotype Imaging Inc. registered in the U.S. Patent and Trademark Office
and may be registered in certain jurisdictions.
Frutiger™ LT Std-Roman typeface is from the Linotype typeface library.
Frutiger™ is a trademark of Linotype Corp. registered in the U.S. Patent and Trademark Office and may be
registered in certain other jurisdictions in the name of Linotype Corp. or its licensee Linotype GmbH.
Opera is a trademark of Opera Software ASA.
All other names of systems, products and services are trademarks of their respective owners. In the manual,
the ™ or ® marks are not specified.
End
This En
Corpora
manufa
EULA ca
with th
to be b
of the S
Notwith
Genera
(“Open
as appl
If you d
HARDW
1. Licen
This SO
use the
2. Rest
The SO
them, a
disasse
You ma
except
and reg
The SO
more th
You ma
related
Except
the reci
or rent
3. Copy
All title
64
VGF-CP1 Series 3-300-630-31(1)
Important notices on the software
Sony
Thank you for purchasing this Sony Digital Photo Frame.
Before using this product with software, be sure to read the following notices carefully.
The beginning to use of this product will be assumed that contents of notices are confirmed and agreed by
the customer.
End User Software License Agreement
Office
may be
H.
This End User Software License Agreement (the “EULA”) is a legal agreement between you and Sony
Corporation (hereinafter referred to as “SONY”), a corporation organized under Japanese Law, the
manufacturer of your SONY computer system related product (the “SONY HARDWARE”). Please read this
EULA carefully before installing or using the software preinstalled in the SONY HARDWARE and/or bundled
with the SONY HARDWARE (the “SONY SOFTWARE”). By installing or using the SONY SOFTWARE, you agree
to be bound by the terms of this EULA. You may use the SONY SOFTWARE only in connection with the use
of the SONY HARDWARE. SONY SOFTWARE is licensed not sold.
Notwithstanding the foregoing, certain portions of the SONY SOFTWARE are governed by the GNU Lesser
General Public License, GNU General Public License and other open source code licenses as defined below
(“Open Source Licenses”). For such portions of the SONY SOFTWARE, the Open Source Licenses shall govern
as applicable.
If you do not agree to the terms of this EULA, please return the SONY SOFTWARE together with the SONY
HARDWARE to the place where you obtained it.
1. License.
This SONY SOFTWARE and the related documentation are licensed to you by SONY. This EULA allows you to
use the SONY SOFTWARE for your personal use for a single SONY HARDWARE.
manual,
2. Restrictions.
The SONY SOFTWARE contains copyrighted material and other proprietary material. In order to protect
them, and except as permitted by applicable law, you may not copy, modify, decompile, reverse engineer or
disassemble the SONY SOFTWARE in whole or in part.
You may not export from anywhere the SONY SOFTWARE and the related documentation provided to you
except in compliance with, and with all licenses and approvals required under, applicable export laws, rules
and regulations.
The SONY SOFTWARE is licensed as a single product. Its component parts may not be separated for use on
more than one device unless expressly authorized by SONY.
You may not remove, alter, cover or deface any trademarks or notices on the SONY SOFTWARE and the
related documentation.
Except for the transfer of the SONY SOFTWARE together with the SONY HARDWARE and prior agreement of
the recipient to be bound by the terms and conditions of this EULA, you may not sell, license, transfer, lease
or rent the SONY SOFTWARE and its copy to any third party.
3. Copyright.
All title and copyright in and to the SONY SOFTWARE and its related documentation and any copies thereof,
65
VGF-CP1 Series 3-300-630-31(1)
are owned by SONY and its licensors. All rights not specifically granted under this EULA are reserved by
SONY and its licensors.
4. Disclaimer of Warranty.
Please note that this section shall apply to you based on where you use the SONY SOFTWARE.
[For use in Republic of Singapore and United Arab Emirates]
The SONY SOFTWARE is provided on an “AS IS” basis and any representations, terms, conditions and
warranties, whether express or implied, by statute or otherwise are expressly disclaimed by SONY including
but not limited to, all the implied warranties, terms and/or conditions of satisfactory quality, merchantability
and fitness for a particular purpose. The terms above in this Section 4 do not affect or prejudice your
statutory rights as an ultimate consumer, neither do they limit or exclude any liability for death or personal
injury caused by the negligence of SONY.
[For use in Commonwealth of Australia]
To the extent permitted by local law, the SONY SOFTWARE is provided on an “AS IS” basis and any
representations, terms, conditions and warranties, whether express or implied, by statute or otherwise are
expressly disclaimed by SONY including but not limited to, all the implied warranties, terms and/or
conditions of satisfactory quality, merchantability and fitness for a particular purpose. Any representations,
terms, conditions and warranties, whether express or implied, by statute or otherwise are expressly
disclaimed by SONY including, but not limited to, the implied warranties and/or conditions of satisfactory
quality and fitness for a particular purpose. The terms above in this Section 4 do not affect or prejudice your
statutory rights as an ultimate consumer, neither do they limit or exclude any liability for death or personal
injury caused by the negligence of SONY. If SONY breaches any condition or warranty implied by any
applicable law which cannot lawfully be excluded, to the extent permitted by the applicable law, its liability
is limited at its option to: (a) in the case of goods, the replacement of the goods or the supply of equivalent
goods, the payment of the cost of replacing the goods or acquiring equivalent goods, the payment of the
cost of having the goods repaired or the repair of the goods; and (b) in the case of services, the supply of
the services again, or the payment of the cost of having the services performed again.
that yo
any oth
that yo
When t
update
for othe
augme
7. Conf
You sha
docum
informa
8. Term
This EU
SOFTW
notice f
the SON
termina
destruc
9. Chan
Any new
provide
update
provide
and con
5. Limitation of Liability.
10. Gov
IN THIS SECTION SONY AND ITS LICENSORS SHALL BE COLLECTIVELY REFERRED TO AS “SONY”. SONY SHALL
NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL or punitive DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY OR ANY
OTHER LEGAL THEORY RELATED TO Sony software. SUCH DAMAGES INCLUDE, BUT ARE NOT LIMITED TO,
LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF Sony hardware OR ANY ASSOCIATED
equipment, DOWN TIME AND USER’S TIME, EVEN IF SONY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN ANY CASE, SONY’S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS EULA SHALL BE LIMITED
TO THE AMOUNT ACTUALLY PAID by you. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL, CONSEQUENTIAL, SPECIAL or punitive DAMAGES, unless certain requirements
are satisfied, and if such requirements are not satisfied then the above exclusion or limitation MAY NOT
APPLY TO YOU. The above limitations and exclusions apply to the extent permitted by law.
This EU
agree to
Notwith
identifie
[For use
This EU
parties
HERETO
6. Update Feature.
From time to time, SONY may update the SONY SOFTWARE, for example for purposes of enhancement of
security functions, error correction and improvement of updating functions at such time as you interact
with SONY’s or SONY’s designee’s server(s). The SONY SOFTWARE will be updated only when you agree such
update. If you reject to update the SONY SOFTWARE when SONY requests such update of you, it is assumed
66
VGF-CP1 Series 3-300-630-31(1)
11. Mis
If for an
unenfo
intent o
effect.
Should
http://w
by
uding
tability
rsonal
that you agree that the security functionality improvements, error corrections, other functional updates or
any other changes offered by SONY through such updates would not be made to the SONY SOFTWARE and
that your current and further use of the SONY SOFTWARE may be affected thereby.
When the SONY SOFTWARE is updated, it is assumed that you agree (a) that the SONY SOFTWARE will be
updated as necessary to improve security functionality, to correct errors, to improve update functionality, or
for other purposes, and (b) that this updating of the SONY SOFTWARE may be accompanied by the
augmenting, modifying, or removing of functionality of the SONY SOFTWARE.
7. Confidentiality.
You shall maintain the confidentiality of any information with regard to the SONY SOFTWARE and its related
documentation that is provided under this EULA and is not publicly known. You agree not to disclose such
information to any third party without the prior written consent.
8. Termination.
e are
ations,
ctory
ce your
rsonal
This EULA is effective until terminated. You may terminate this EULA at any time by destroying the SONY
SOFTWARE, related documentation, and all copies thereof. This EULA will terminate immediately without
notice from SONY, if you fail to comply with any provision of this EULA. Upon termination you must destroy
the SONY SOFTWARE, related documentation, and all copies thereof in two (2) weeks from the date of
termination of this EULA. Upon SONY’s request, you shall deliver to SONY a certificate confirming such
destruction.
9. Changes to Service.
iability
valent
of the
y of
Any new text, content, file, data, product, services, information, software, software tool or other feature
provided by SONY (through the network or by CD-ROM or other means) (including, but not limited to, any
update to SONY SOFTWARE provided to you pursuant to Section 6 of this EULA) will be subject to this EULA;
provided that, if separate terms and conditions applicable to such feature are provided to you, such terms
and conditions shall apply to such feature in priority to this Agreement.
10. Governing Law and Jurisdiction.
SHALL
OF
TO,
IATED
SUCH
IMITED
ments
OT
nt of
act
ee such
sumed
This EULA shall be governed by and construed in accordance with the laws of Japan. The parties hereby
agree to submit to the exclusive jurisdiction of the courts of Japan.
Notwithstanding the foregoing, the following terms and conditions shall apply for use in the territory
identified below.
[For uses in United Arab Emirates]
This EULA shall be governed by and construed in accordance with the laws of United Arab Emirates. The
parties hereby agree to submit to the non-exclusive jurisdiction of the courts of Japan. THE PARTIES
HERETO waive trial by jury with respect to any matters arising and/or relating to this EULA.
11. Miscellaneous.
If for any reason a court of competent jurisdiction finds any provision of this EULA, or portion thereof, to be
unenforceable, that provision shall be enforced to the maximum extent permissible so as to affect the
intent of this EULA, and the remaining terms and conditions of this EULA shall continue in full force and
effect.
Should you have any questions concerning this EULA or this limited warranty, please contact
http://www.vaio-online.sony.com/
67
VGF-CP1 Series 3-300-630-31(1)
GNU GPL/LGPL applied software
This product contains software that is subject to the following GNU General Public License (“GPL”) or GNU
Lesser General Public License (“LGPL”). These establish that customers have the right to acquire, modify, and
redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.
Package List
nandboot
linux-kernel
wireless_tools
busybox
ysdev
zlib
ncurses
e2fsprogs
device-mapper
dosfstools
mtd
glibc
directFB
mtrace
perl
gdb
madplay
mtrace
samba
uuennode
The source code for the above-listed software is available on the Web.
To download, please access the following URL:
http://www.sony.net/Products/Linux
Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code.
GNU GENERAL PUBLIC LICENSE
software
to any o
GNU Les
When w
sure that
receive s
and that
To prote
the right
modify i
For exam
rights th
these te
We prote
permissi
Also, for
for this f
they hav
Finally, a
free prog
made it
The prec
TERMS
0.
Activitie
act of ru
work ba
what the
1.
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
This
may
wor
to s
ano
add
You
that
war
reci
You may
exchang
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
2.
Preamble
The Licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public License is intended to guarantee your freedom to share and change free software--to make sure the
68
VGF-CP1 Series 3-300-630-31(1)
You
and
all o
a)
software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and
to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the
GNU Lesser General Public License instead.) You can apply it to your programs, too.
GNU
fy, and
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make
sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you
receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;
and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender
the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the
rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal
permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty
for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what
they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a
free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have
made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0.
e code.
This License applies to any program or other work which contains a notice placed by the copyright holder saying it
may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or
work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is
to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into
another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a
work based on the Program (independent of having been made by running the Program). Whether that is true depends on
what the Program does.
1.
You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided
that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of
warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
ed.
2.
You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program,
and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet
all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any
change.
69
VGF-CP1 Series 3-300-630-31(1)
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the
Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this
License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started
running for such interactive use in the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty)
and that users may redistribute the program under these conditions, and telling the user how to view a copy of
this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your
work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the
Program, and can be reasonably considered independent and separate works in themselves, then this License, and its
terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same
sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless
of who wrote it.
6.
Eac
lice
may
for e
7.
If, as
pate
con
satis
you
of th
bot
If any po
is intend
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the
Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
It is not t
validity o
system, w
range of
author/d
impose t
3.
This sect
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Program.
You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than
your cost of physically performing source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for
software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This
alternative is allowed only for noncommercial distribution and only if you received the program in object code or
executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work,
complete source code means all the source code for all modules it contains, plus any associated interface definition files,
plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source
code distributed need not include anything that is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering
equivalent access to copy the source code from the same place counts as distribution of the source code, even though
third parties are not compelled to copy the source along with the object code.
4.
You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your
rights under this License. However, parties who have received copies, or rights, from you under this License will not
have their licenses terminated so long as such parties remain in full compliance.
5.
You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate
your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
70
VGF-CP1 Series 3-300-630-31(1)
8.
If th
inte
dist
exc
9.
The
time
or c
Each ver
applies t
any later
License,
10. If yo
writ
the
pres
gen
NO WA
11. BEC
PER
OTH
INC
PUR
PRO
12. IN N
ANY
FOR
USE
the
is
nty)
py of
ent, your
m the
its
me
ms of
ardless
he
on the
cense.
form
d under
6.
Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a
license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7.
If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution
of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy
both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
8.
If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9.
The Free Software Foundation may publish revised and/or new versions of the General Public License from time to
time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems
or concerns.
than
nding
or
his
ode or
work,
n files,
source
ajor
onent
ugh
e. Any
te your
l not
mission
cept
cate
the
Each version is given a distinguishing version number. If the Program specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different,
write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to
the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of
preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software
generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
71
VGF-CP1 Series 3-300-630-31(1)
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH
ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this
is to make it free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most
effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where
the full notice is found.

Copyright (C)  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
GNU
Version 2
Copyrigh
59 Temp
this licen
[This is t
2, hence
Pream
The licen
General
software
This licen
of the Fr
carefully
case, bas
When w
make su
receive s
and that
To prote
surrende
if you m
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
type `show w’. This is free software, and you are welcome to redistribute it under certain conditions; type `show c’ for
details.
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of the General Public License. Of
course, the commands you use may be called something other than `show w’ and `show c’; they could even be mouseclicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for
the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program `Gnomovision’
(which makes passes at compilers) written
by James Hacker.
, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If your program is a
subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what
you want to do, use the GNU Lesser General Public License instead of this License.
72
VGF-CP1 Series 3-300-630-31(1)
For exam
we gave
you mus
to the lib
We prote
you lega
To prote
modified
that the
Finally, s
cannot e
insist tha
in this lic
Most GN
Lesser G
License.
When a
speaking
linking o
for linkin
We call t
WITH
SUCH
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of
this license document, but changing it is not allowed.
eve this
ost
where
cense as
ed
ore
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version
2, hence the version number 2.1.]
Preamble
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU
General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the
software is free for all its users.
This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries-of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think
carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular
case, based on the explanations below.
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to
make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you
receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs;
and that you are informed that you can do these things.
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to
surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or
if you modify it.
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that
we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library,
you must provide complete object files to the recipients, so that they can relink them with the library after making changes
to the library and recompiling it. And you must show them these terms so they know their rights.
or
e. Of
ouse-
er” for
We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives
you legal permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is
modified by someone else and passed on, the recipients should know that what they have is not the original version, so
that the original author’s reputation will not be affected by problems that might be introduced by others.
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company
cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we
insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified
in this license.
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU
Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public
License. We use this license for certain libraries in order to permit linking those libraries into non-free programs.
m is a
is what
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally
speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria
for linking other code with the library.
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary
73
VGF-CP1 Series 3-300-630-31(1)
General Public License. It also provides other free software developers Less of an advantage over competing non-free
programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the
Lesser license provides advantages in certain special circumstances.
c)
d)
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so
that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent
case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting
the free library to free software only, so we use the Lesser General Public License.
(For
of th
func
root
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a
large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more
people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a
program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version
of the Library.
The
the
its t
sam
term
part
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference
between a “work based on the library” and a “work that uses the library”. The former contains code derived from the library,
whereas the latter must be combined with the library in order to run.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0.
This License Agreement applies to any software library or other program which contains a notice placed by the
copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public
License (also called “this License”). Each licensee is addressed as “you”.
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application
programs (which use some of those functions and data) to form executables.
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work
based on the Library” means either the Library or any derivative work under copyright law: that is to say, a work containing
the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another
language. (Hereinafter, translation is included without limitation in the term “modification”.)
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source
code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts
used to control compilation and installation of the library.
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The
act of running a program using the Library is not restricted, and output from such a program is covered only if its contents
constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true
depends on what the Library does and what the program that uses the Library does.
1.
You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium,
provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and
disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and
distribute a copy of this License along with the Library.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in
exchange for a fee.
2.
You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and
copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of
these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any
74
VGF-CP1 Series 3-300-630-31(1)
Thus, it i
intent is
In additi
Library)
3.
You
the
Gen
Gen
cha
Once th
to all sub
This opt
4.
You
form
mac
cust
If distrib
copy the
parties a
5.
Ap
com
the
Howeve
(because
by this L
When a “
may be a
the work
change.
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this
License.
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program
that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good
faith effort to ensure that, in the event an application does not supply such function or table, the facility still
operates, and performs whatever part of its purpose remains meaningful.
ee
ver, the
ry, so
frequent
iting
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent
of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this
function must be optional: if the application does not supply it, the square root function must still compute square
roots.)
ea
more
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from
the Library, and can be reasonably considered independent and separate works in themselves, then this License, and
its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the
same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the
terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every
part regardless of who wrote it.
version
ence
library,
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the
intent is to exercise the right to control the distribution of derivative or collective works based on the Library.
Public
cation
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the
Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.
3.
ork
taining
You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of
the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU
General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU
General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other
change in these notices.
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies
to all subsequent copies and derivative works made from that copy.
e source
ipts
This option is useful when you wish to copy part of the code of the Library into a program that is not a library.
4.
pe. The
ontents
s true
edium,
and
on in
ry, and
et all of
te of any
You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable
form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding
machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange.
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to
copy the source code from the same place satisfies the requirement to distribute the source code, even though third
parties are not compelled to copy the source along with the object code.
5.
A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being
compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of
the Library, and therefore falls outside the scope of this License.
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library
(because it contains portions of the Library), rather than a “work that uses the library”. The executable is therefore covered
by this License. Section 6 states terms for distribution of such executables.
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work
may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if
the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely
75
VGF-CP1 Series 3-300-630-31(1)
und
defined by law.
If such an object file uses only numerical parameters, data structure layouts and assessors, and small macros and small
inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a
derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of
Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the
Library itself.
6.
As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to
produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that
the terms permit modification of the work for the customer’s own use and reverse engineering for debugging such
modifications.
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are
covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices,
you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of
this License. Also, you must do one of these things:
a)
b)
c)
d)
e)
Accompany the work with the complete corresponding machine-readable source code for the Library including
whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is
an executable linked with the Library, with the complete machine-readable “work that uses the Library”, as object code
and/or source code, so that the user can modify the Library and then relink to produce a modified executable
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application to use the modified definitions.)
Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run
time a copy of the library already present on the user’s computer system, rather than copying library functions into the
executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the
modified version is interface-compatible with the version that the work was made with.
Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in
Subsection 6a, above, for a charge no more than the cost of performing this distribution.
If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy
the above specified materials from the same place.
Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed
for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include
anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an
executable that you distribute.
7.
8.
You may place library facilities that are a work based on the Library side-by-side in a single library together with other
library facilities not covered by this License, and distribute such a combined library, provided that the separate
distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided
that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other
library facilities. This must be distributed under the terms of the Sections above.
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and
explaining where to find the accompanying uncombined form of the same work.
You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this
License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will
automatically terminate your rights under this License. However, parties who have received copies, or rights, from you
76
VGF-CP1 Series 3-300-630-31(1)
9.
You
to m
Lice
acce
or w
10. Eac
from
may
for e
11. If, as
pate
con
satis
you
the
it an
If any po
is intend
It is not t
validity o
system w
range of
author/d
impose t
This sect
12. If th
inte
dist
exc
13. The
to t
pro
Each ver
applies t
any later
may cho
14. If yo
with
Fou
guid
sha
NO WA
15. BEC
PER
under this License will not have their licenses terminated so long as such parties remain in full compliance.
mall
egally a
s of
th the
rary to
ed that
such
s use are
ices,
copy of
ng
e work is
ect code
the
at run
into the
s the
9.
You are not required to accept this License, since you have not signed it. However, nothing else grants you permission
to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this
License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your
acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library
or works based on it.
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license
from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties with this License.
11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to
patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to
satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence
you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of
the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section
is intended to apply, and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest
validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution
system which is implemented by public license practices. Many people have made generous contributions to the wide
range of software distributed through that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot
impose that choice.
ified in
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.
o copy
y.
needed
clude
and so
ble.
rmally
in an
h other
ded
y other
nd
om you
12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted
interfaces, the original copyright holder who places the Library under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if written in the body of this License.
13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time
to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new
problems or concerns.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which
applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Library does not specify a license version number, you
may choose any version ever published by the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software
Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be
guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the
sharing and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
77
VGF-CP1 Series 3-300-630-31(1)
OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY
OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free
software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
alternatively, under the terms of the ordinary General Public License).
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to
most effectively convey the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to
where the full notice is found.

Copyright (C)  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for
more details.
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for
the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob’ (a library for tweaking knobs) written by James
Random Hacker.
signature of Ty Coon, 1 April 1990
Ty Coon, President of Vice
That’s all there is to it!
78
VGF-CP1 Series 3-300-630-31(1)
Net
Copyrigh
Redistrib
conditio
1. Red
disc
2. Red
disc
3. All a
This
4. Neit
prod
THIS SOF
INCLUDI
PURPOS
INCIDEN
SUBSTIT
ON ANY
OTHERW
DAMAG
The follo
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
This prod
contribu
This prod
This prod
This prod
This prod
USA.
D,
CULAR
NetBSD software
Copyright (c) 1994-2004 The NetBSD Foundation, Inc. All rights reserved.
ER, OR
O YOU
T OF THE
ERED
H ANY
g it free
(or,
e file to
er to
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.
4. Neither the name of The NetBSD Foundation nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The following notices are required to satisfy the license terms of the software that we have mentioned in this document:
version.
for
e Free
er” for
mes
This product includes software developed by Adam Glass.
This product includes software developed by Bill Paul.
This product includes software developed by Charles M. Hannum.
This product includes software developed by Christian E. Hopps.
This product includes software developed by Christopher G. Demetriou.
This product includes software developed by Christopher G. Demetriou for the NetBSD Project.
This product includes software developed by Christos Zoulas.
This product includes software developed by Gardner Buchanan.
This product includes software developed by Gordon W. Ross
This product includes software developed by Manuel Bouyer.
This product includes software developed by Rolf Grossmann.
This product includes software developed by TooLs GmbH.
This product includes software developed by the NetBSD Foundation, Inc. and its contributors.
This product includes software developed by the University of California, Berkeley and its contributors.
This product includes software developed by the University of California, Lawrence Berkeley Laboratory and its
contributors.
This product includes software developed by the University of California, Lawrence Berkeley Laboratory.
This product includes software developed for the NetBSD Project by Wasabi Systems, Inc.
This product includes software developed for the NetBSD Project by Matthias Drochner.
This product includes software developed under OpenBSD by Per Fogelstrom Opsycon AB for RTMX Inc, North Carolina,
USA.
79
VGF-CP1 Series 3-300-630-31(1)
OpenSSL software
This product is equipped with the software “Open SSL” including the library called “Original SSLeay” that our company uses
based on licensing agreement with a copyright holder. Based on the demand of the copyright holder of this software, our
company has the duty to notify the customer of the following contents. Please read the following notices.
OpenSSL License
Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1.
Redistributions of source code must retain the above copyright notice, this list of conditions and the following
disclaimer.
2.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3.
All advertising materials mentioning features or use of this software must display the following acknowledgment: “This
product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.
org/)”
4.
The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from
this software without prior written permission. For written permission, please contact openssl-core@openssl.org.
5.
Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without
prior written permission of the OpenSSL Project.
6.
Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.
openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software
written by Tim Hudson (tjh@cryptsoft.com).
This libra
following
code. Th
holder is
Copyrigh
If this pa
This can
package
Redistrib
conditio
1. Red
2. Red
disc
3. All a
“Thi
The
4. If yo
incl
“Thi
THIS SOF
LIMITED
IN NO EV
EXEMPLA
OR SERV
LIABILITY
WAY OU
The licen
code can
[includin
AES
Copyrigh
LICENSE
The free
that:
1.
dist
disc
2.
dist
the
Original SSLeay License
Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as
to conform with Netscapes SSL.
80
VGF-CP1 Series 3-300-630-31(1)
ny uses
re, our
llowing
wing
nt: “This
nssl.
d from
g.
hout
w.
AR
DIRECT,
N)
DING
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The
following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL
code. The SSL documentation included with this distribution is covered by the same copyright terms except that the
holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed.
If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the
package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following acknowledgement:
“This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)”
The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof ) from the apps directory (application code) you must
include an acknowledgement:
“This product includes software written by Tim Hudson (tjh@cryptsoft.com)”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this
code cannot simply be copied and put under another distribution licence
[including the GNU Public Licence.]
AES
Copyright (c) 2003, Dr Brian Gladman, Worcester, UK. All rights reserved.
LICENSE TERMS
ware
n so as
The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided
that:
1.
distributions of this source code include the above copyright notice, this list of conditions and the following
disclaimer;
2.
distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in
the documentation and/or other associated materials;
81
VGF-CP1 Series 3-300-630-31(1)
3.
the copyright holder’s name is not used to endorse products built using this software without specific written
permission.
ALTERNATIVELY, provided that this notice is retained in full, this product may be distributed under the terms of the GNU
General Public License (GPL), in which case the provisions of the GPL apply INSTEAD OF those given above.
DISCLAIMER
This software is provided ‘as is’ with no explicit or implied warranties in respect of its properties, including, but not limited
to, correctness and/or fitness for purpose.
MD5
md5.c
RSA Data Security, Inc. MD5 Message Digest Algorithm
Created: 2/17/90 RLR
Revised: 1/91 SRD,AJ,BSK,JT Reference C Version
This soft
All Right
Permissi
without
(1) If an
cop
clea
(2) If on
in p
(3) Perm
con
These co
our work
Permissi
software
We spec
warranty
Copyright (C) 1990, RSA Data Security, Inc. All rights reserved.
License to copy and use this software is granted provided that it is identified as the “RSA Data Security, Inc. MD5 Message
Digest Algorithm” in all material mentioning or referencing this software or this function.
fdlib
License is also granted to make and use derivative works provided that such works are identified as “derived from the RSA
Data Security, Inc. MD5 Message Digest Algorithm” in all material mentioning or referencing the derived work.
@(#)fdlib
Copyrigh
RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of
this software for any particular purpose. It is provided “as is” without express or implied warranty of any kind.
Develop
Permissi
granted,
These notices must be retained in any copies of any part of this documentation and/or software.
JPEG
MO
1.
The research result of Independent JPEG GROUP is used to a part of this product.
In plain English:
1. We don’t promise that this software works. (But if you find any bugs, please let us know!)
2. You can use this software for whatever you want. You don’t have to pay us.
3. You may not pretend that you wrote this software. If you use it in a program, you must acknowledge somewhere in
your documentation that you’ve used the IJG code.
In legalese:
The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality,
accuracy, merchantability, or fitness for a particular purpose. This software is provided “AS IS”, and you, its user assume the
entire risk as to its quality and accuracy.
Def
1.0.
1.1.
1.2.
1.3.
1.4.
1.5.
1.6.
1.7.
1.8.
1.8.
82
VGF-CP1 Series 3-300-630-31(1)
GNU
mited
This software is copyright (c) 1991-1998, Thomas G. Lane.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof ) for any purpose,
without fee, subject to these conditions:
(1) If any part of the source code for this software is distributed, then this README file must be included, with this
copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be
clearly indicated in accompanying documentation.
(2) If only executable code is distributed, then the accompanying documentation must state that “this software is based
in part on the work of the Independent JPEG Group”.
(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable
consequences; the authors accept NO LIABILITY for damages of any kind.
These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use
our work, you ought to acknowledge us.
Permission is NOT granted for the use of any IJG author’s name or company name in advertising or publicity relating to this
software or products derived from it. This software may be referred to only as “the Independent JPEG Group’s software”.
We specifically permit and encourage the use of this software as the basis of commercial products, provided that all
warranty or liability claims are assumed by the product vendor.
ssage
fdlibm software
e RSA
@(#)fdlibm.h 1.5 95/01/18
Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
bility of
Developed at SunSoft, a Sun Microsystems, Inc. business.
Permission to use, copy, modify, and distribute this software is freely
granted,provided that this notice is preserved.
MOZILLA PUBLIC LICENSE Version 1.1
1.
ere in
ity,
me the
Definitions.
1.0.1. “Commercial Use” means distribution or otherwise making the Covered Code available to a third party.
1.1.
“Contributor” means each entity that creates or contributes to the creation of Modifications.
1.2.
“Contributor Version” means the combination of the Original Code, prior Modifications used by a Contributor,
and the Modifications made by that particular Contributor.
1.3.
“Covered Code” means the Original Code or Modifications or the combination of the Original Code and
Modifications, in each case including portions thereof.
1.4.
“Electronic Distribution Mechanism” means a mechanism generally accepted in the software development
community for the electronic transfer of data.
1.5.
“Executable” means Covered Code in any form other than Source Code.
1.6.
“Initial Developer” means the individual or entity identified as the Initial Developer in the Source Code notice
required by Exhibit A.
1.7.
“Larger Work” means a work which combines Covered Code or portions thereof with code not governed by the
terms of this License.
1.8.
“License” means this document.
1.8.1. “Licensable” means having the right to grant, to the maximum extent possible, whether at the time of the
initial grant or subsequently acquired, any and all of the rights conveyed herein.
83
VGF-CP1 Series 3-300-630-31(1)
1.9.
2.
“Modifications” means any addition to or deletion from the substance or structure of either the Original Code
or any previous Modifications. When Covered Code is released as a series of files, a Modification is:
A. Any addition to or deletion from the contents of a file containing Original Code or previous Modifications.
B. Any new file that contains any part of the Original Code or previous Modifications.
1.10. “Original Code” means Source Code of computer software code which is described in the Source Code notice
required by Exhibit A as Original Code, and which, at the time of its release under this License is not already
Covered Code governed by this License.
1.10.1. “Patent Claims” means any patent claim(s), now owned or hereafter acquired, including without limitation,
method, process, and apparatus claims, in any patent Licensable by grantor.
1.11. “Source Code” means the preferred form of the Covered Code for making modifications to it, including all
modules it contains, plus any associated interface definition files, scripts used to control compilation and
installation of an Executable, or source code differential comparisons against either the Original Code or
another well known, available Covered Code of the Contributor’s choice. The Source Code can be in a
compressed or archival form, provided the appropriate decompression or de-archiving software is widely
available for no charge.
1.12. “You” (or “Your”) means an individual or a legal entity exercising rights under, and complying with all of the
terms of, this License or a future version of this License issued under Section 6.1. For legal entities, “You”
includes any entity which controls, is controlled by, or is under common control with You. For purposes of this
definition, “control” means (a) the power, direct or indirect, to cause the direction or management of such
entity, whether by contract or otherwise, or (b) ownership of more than fifty percent (50%) of the outstanding
shares or beneficial ownership of such entity.
Source Code License.
2.1.
The Initial Developer Grant.
The Initial Developer hereby grants You a world-wide, royalty-free, non-exclusive license, subject to third party
intellectual property claims:
(a) under intellectual property rights (other than patent or trademark) Licensable by Initial Developer to use,
reproduce, modify, display, perform, sublicense and distribute the Original Code (or portions thereof ) with
or without Modifications, and/or as part of a Larger Work; and
(b) under Patents Claims infringed by the making, using or selling of Original Code, to make, have made, use,
practice, sell, and offer for sale, and/or otherwise dispose of the Original Code (or portions thereof ).
(c) the licenses granted in this Section 2.1(a) and (b) are effective on the date Initial Developer first distributes
Original Code under the terms of this License.
(d) Notwithstanding Section 2.1(b) above, no patent license is granted: 1) for code that You delete from the
Original Code; 2) separate from the Original Code; or 3) for infringements caused by: i) the modification
of the Original Code or ii) the combination of the Original Code with other software or devices.
2.2.
Contributor Grant.
Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royaltyfree, non-exclusive license
(a) under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use,
reproduce, modify, display, perform, sublicense and distribute the Modifications created by such
Contributor (or portions thereof ) either on an unmodified basis, with other Modifications, as Covered
Code and/or as part of a Larger Work; and
(b) under Patent Claims infringed by the making, using, or selling of Modifications made by that Contributor
either alone and/or in combination with its Contributor Version (or portions of such combination), to
make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) Modifications made by that
Contributor (or portions thereof ); and 2) the combination of Modifications made by that Contributor with
its Contributor Version (or portions of such combination).
(c) the licenses granted in Sections 2.2(a) and 2.2(b) are effective on the date Contributor first makes
Commercial Use of the Covered Code.
(d) Notwithstanding Section 2.2(b) above, no patent license is granted: 1) for any code that Contributor has
deleted from the Contributor Version; 2) separate from the Contributor Version; 3) for infringements
caused by: i) third party modifications of Contributor Version or ii) the combination of Modifications
made by that Contributor with other software (except as part of the Contributor Version) or other
devices; or 4) under Patent Claims infringed by Covered Code in the absence of Modifications made by
that Contributor.
84
VGF-CP1 Series 3-300-630-31(1)
3.
Dist
3.1.
3.2.
3.3.
3.4.
3.5.
3.6.
Code
cations.
notice
eady
on,
all
ely
the
of this
ch
anding
d party
to use,
eof ) with
de, use,
).
tributes
m the
cation
yaltyse,
red
tributor
to
at
tor with
or has
nts
ns
de by
3.
Distribution Obligations.
3.1.
Application of License.
The Modifications which You create or to which You contribute are governed by the terms of this License,
including without limitation Section 2.2. The Source Code version of Covered Code may be distributed only
under the terms of this License or a future version of this License released under Section 6.1, and You must
include a copy of this License with every copy of the Source Code You distribute. You may not offer or impose
any terms on any Source Code version that alters or restricts the applicable version of this License or the
recipients’ rights hereunder. However, You may include an additional document offering the additional rights
described in Section 3.5.
3.2.
Availability of Source Code.
Any Modification which You create or to which You contribute must be made available in Source Code form
under the terms of this License either on the same media as an Executable version or via an accepted
Electronic Distribution Mechanism to anyone to whom you made an Executable version available; and if made
available via Electronic Distribution Mechanism, must remain available for at least twelve (12) months after the
date it initially became available, or at least six (6) months after a subsequent version of that particular
Modification has been made available to such recipients. You are responsible for ensuring that the Source
Code version remains available even if the Electronic Distribution Mechanism is maintained by a third party.
3.3.
Description of Modifications.
You must cause all Covered Code to which You contribute to contain a file documenting the changes You
made to create that Covered Code and the date of any change. You must include a prominent statement that
the Modification is derived, directly or indirectly, from Original Code provided by the Initial Developer and
including the name of the Initial Developer in (a) the Source Code, and (b) in any notice in an Executable
version or related documentation in which You describe the origin or ownership of the Covered Code.
3.4.
Intellectual Property Matters
(a) Third Party Claims.
If Contributor has knowledge that a license under a third party’s intellectual property rights is required to
exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text
file with the Source Code distribution titled “LEGAL” which describes the claim and the party making the
claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such
knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly
modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such
as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received
the Covered Code that new knowledge has been obtained.
(b) Contributor APIs.
If Contributor’s Modifications include an application programming interface and Contributor has
knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must
also include this information in the LEGAL file.
(c) Representations.
Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes
that Contributor’s Modifications are Contributor’s original creation(s) and/or Contributor has sufficient
rights to grant the rights conveyed by this License.
3.5.
Required Notices.
You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such
notice in a particular Source Code file due to its structure, then You must include such notice in a location
(such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more
Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also
duplicate this License in any documentation for the Source Code where You describe recipients’ rights or
ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support,
indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on
Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely
clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby
agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer
or such Contributor as a result of warranty, support, indemnity or liability terms You offer.
3.6.
Distribution of Executable Versions.
You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met
for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is
available under the terms of this License, including a description of how and where You have fulfilled the
85
VGF-CP1 Series 3-300-630-31(1)
4.
5.
6.
7.
8.
obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version,
related documentation or collateral in which You describe recipients’ rights relating to the Covered Code. You
may distribute the Executable version of Covered Code or ownership rights under a license of Your choice,
which may contain terms different from this License, provided that You are in compliance with the terms of
this License and that the license for the Executable version does not attempt to limit or alter the recipient’s
rights in the Source Code version from the rights set forth in this License. If You distribute the Executable
version under a different license You must make it absolutely clear that any terms which differ from this License
are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the
Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as
a result of any such terms You offer.
3.7.
Larger Works.
You may create a Larger Work by combining Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In such a case, You must make sure the
requirements of this License are fulfilled for the Covered Code.
Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered
Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the
maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be
included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code.
Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient
of ordinary skill to be able to understand it.
Application of this License.
This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered
Code.
Versions of the License.
6.1.
New Versions.
Netscape Communications Corporation (“Netscape”) may publish revised and/or new versions of the License
from time to time. Each version will be given a distinguishing version number.
6.2.
Effect of New Versions.
Once Covered Code has been published under a particular version of the License, You may always continue to
use it under the terms of that version. You may also choose to use such Covered Code under the terms of any
subsequent version of the License published by Netscape. No one other than Netscape has the right to modify
the terms applicable to Covered Code created under this License.
6.3.
Derivative Works.
If You create or use a modified version of this License (which you may only do in order to apply it to code
which is not already Covered Code governed by this License), You must (a) rename Your license so that the
phrases “Mozilla”, “MOZILLAPL”, “MOZPL”, “Netscape”, “MPL”, “NPL” or any confusingly similar phrase do not appear
in your license (except to note that your license differs from this License) and (b) otherwise make it clear that
Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public
License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in
Exhibit A shall not of themselves be deemed to be modifications of this License.)
DISCLAIMER OF WARRANTY.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF
DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE
IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY
NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART
OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER.
TERMINATION.
8.1.
This License and the rights granted hereunder will terminate automatically if You fail to comply with terms
herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the
Covered Code which are properly granted shall survive any termination of this License. Provisions which, by
their nature, must remain in effect beyond the termination of this License shall survive.
8.2.
If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions)
against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such
action is referred to as “Participant”) alleging that:
86
VGF-CP1 Series 3-300-630-31(1)
8.3.
8.4.
9.
10.
11.
12.
13.
LIM
UND
OR
COD
INC
LOS
COM
DAM
FRO
JUR
THIS
U.S.
The
com
(Sep
Gov
MIS
This
held
Lice
exc
cha
subj
Cou
atto
of G
con
RES
As b
indi
Con
con
MU
Initi
the
alte
ersion,
e. You
ice,
ms of
nt’s
License
y the
butor as
s of this
red
ode.
ipient
9.
Covered
cense
tinue to
of any
o modify
10.
de
the
appear
r that
blic
d in
11.
THER
ECTIVE
L PART
ER.
12.
rms
the
h, by
13.
ch
(a) such Participant’s Contributor Version directly or indirectly infringes any patent, then any and all rights
granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice
from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i)
agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of
Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the
Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment
arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not
withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate
at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such Participant’s Contributor Version, directly or indirectly
infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b)
are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications
made by that Participant.
8.3.
If You assert a patent infringement claim against Participant alleging that such Participant’s Contributor Version
directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior
to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such
Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any
payment or license.
8.4.
In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding
distributors and resellers) which have been validly granted by You or any distributor hereunder prior to
termination shall survive termination.
LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT,
OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED
CODE, OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER
COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH
DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING
FROM SUCH PARTY’S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
U.S. GOVERNMENT END USERS.
The Covered Code is a “commercial item,” as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of “commercial
computer software” and “commercial computer software documentation,” as such terms are used in 48 C.F.R. 12.212
(Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S.
Government End Users acquire Covered Code with only those rights set forth herein.
MISCELLANEOUS.
This License represents the complete agreement concerning subject matter hereof. If any provision of this License is
held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This
License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise),
excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity
chartered or registered to do business in the United States of America, any litigation relating to this License shall be
subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara
County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable
attorneys’ fees and expenses. The application of the United Nations Convention on Contracts for the International Sale
of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be
construed against the drafter shall not apply to this License.
RESPONSIBILITY FOR CLAIMS.
As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or
indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and
Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to
constitute any admission of liability.
MULTIPLE-LICENSED CODE.
Initial Developer may designate portions of the Covered Code as “Multiple-Licensed”. “Multiple-Licensed” means that
the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the
alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A.
87
VGF-CP1 Series 3-300-630-31(1)
EXHIBIT A -Mozilla Public License.
The contents of this file are subject to the Mozilla Public License Version 1.1 (the “License”); you may not use this file
except in compliance with the License. You may obtain a copy of the License at
http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an “AS IS” basis, WITHOUT WARRANTY OF ANY KIND, either
express or implied. See the License for the specific language governing rights and limitations under the License.
The Original Code is Mozilla Communicator client code, released March 31, 1998.
The Initial Developer of the Original Code is Netscape Communications Corporation.
Portions created by the Initial Developer are Copyright (C) 1998-1999 the Initial Developer. All Rights Reserved.
Inde
Access
Add to
AOSS ..
Contributor(s):
Alternatively, the contents of this file may be used under the terms of either of the GNU General Public License Version
2 or later (the “GPL”), or the GNU Lesser General Public License Version 2.1 or later (the “LGPL”), in which case the
provisions of the GPL or the LGPL are applicable instead of those above. If you wish to allow use of your version of this
file only under the terms of either the GPL or the LGPL, and not to allow others to use your version of this file under the
terms of the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other
provisions required by the GPL or the LGPL. If you do not delete the provisions above, a recipient may use your version
of this file under the terms of any one of the MPL, the GPL or the LGPL.
AOSS b
Auto p
Backgr
Bookm
The MIT License
Brightn
Browse
Copyright (c) 1998-2004,2005 Free Software Foundation, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom
the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the
Software.
Conne
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN
NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Compa
Compa
Create
Date an
Delete
Delete
Delete
Delete
Demon
Device
Digital
Display
88
VGF-CP1 Series 3-300-630-31(1)
s file
Index
her
e.
Access points ............................................................ 39, 42
Encryption key ................................................................. 42
Add to shared frames .................................................. 46
AOSS ....................................................................................... 39
Version
n of this
nder the
d other
version
AOSS button ...................................................................... 40
Frame ..............................................................15, 18, 21, 22
Auto power on/off ......................................................... 50
Frame settings .................................................................. 45
Background photo settings ..................................... 46
Google .......................................................................... 28, 48
Bookmarks .......................................................................... 46
Google account ...............................................26, 27, 28
Brightness adjustment ................................................ 49
Browse screen .................................................................. 16
Home screen ............................................................. 15, 21
hts to
o whom
Compatible memory cards ...................................... 13
Connecting to a wireless network ....................... 39
Create new frame ............................................19, 45, 46
NT. IN
TY,
HE
Compact Flash ......................................................... 12, 13
Information browse screen .............................. 15, 25
Initialization ........................................................................ 50
Input address .................................................................... 46
Internal memory info ................................................... 50
Internal memory ..................................................... 22, 47
Date and time settings ............................................... 49
IP address ............................................................................ 44
Delete cookies .................................................................. 46
Delete from shared frame ......................................... 45
Delete photos ................................................................... 46
Delete RSS ........................................................................... 46
Demonstration ................................................................. 49
Device name ..................................................................... 50
Memories frame .............................................................. 24
Memory Stick media ............................................ 12, 13
Music browse screen ........................................... 15, 24
Music frame ....................................................................... 24
Digital still camera ......................................................... 12
Displaying photos ...........................................16, 31, 37
89
VGF-CP1 Series 3-300-630-31(1)
N
Standby mode ..................................................14, 49, 50
Network settings ............................................................ 48
Start Timer ........................................................................... 49
New Info indicator .................................................... 6, 50
Start Web browser ......................................................... 45
News frame ........................................................................ 25
Stop Timer ........................................................................... 49
System settings ............................................................... 50
Options menu .................................................................. 45
Timer settings ................................................................... 49
Turning on the power ................................................. 14
Photo browse screen ........................................... 15, 22
Photo display position ................................................ 49
Photos and Info frame ......................................... 18, 22
Upload ........................................................................... 29, 45
Photos frame ..................................................................... 23
USB cable ............................................................................. 12
Picasa Web Albums by Google .......26, 27, 29, 31
USB memory ..................................................................... 12
Play .......................................................................................... 45
VAIO Media ......................................................................... 34
Register RSS ............................................................... 46, 47
VAIO Media Integrated Server ................................ 36
Register to internal memory ................................... 45
VAIO Media Server Settings ..................................... 36
Register to/Delete from internal memory ...... 46
Remote Home Access ................................................. 48
Replacing the battery .................................................. 11
Wireless LAN router ............................................... 39, 42
RSS frame ............................................................................. 25
Zoom ..................................................................................... 46
Samba .................................................................................... 48
Sample photos ................................................................. 17
Screen display ................................................................... 49
SD memory cards ........................................................... 13
SD/SDHC memory cards ........................................... 12
Security type ..................................................................... 42
Server settings .......................................................... 36, 48
Settings ......................................................................... 15, 48
Shared frame ..................................................................... 23
SSID ......................................................................................... 42
90
VGF-CP1 Series 3-300-630-31(1)
49, 50
....... 49
....... 45
....... 49
....... 50
....... 49
....... 14
29, 45
....... 12
....... 12
....... 34
....... 36
....... 36
39, 42
....... 46
VGF-CP1 Series 3-300-630-31(1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2008:07:04 14:27:44+09:00
GTS PDFX Version                : PDF/X-1:2001
GTS PDFX Conformance            : PDF/X-1a:2001
Modify Date                     : 2008:07:07 08:56:12+09:00
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Trapped                         : False
Mod Date                        : 2008:07:07 08:56:12+09:00
Creation Date                   : 2008:07:04 14:27:44+09:00
Author                          : Administrator
Creator Tool                    : Adobe InDesign CS2 (4.0.4)
Metadata Date                   : 2008:07:07 08:56:12+09:00
Document ID                     : uuid:45a68860-f2b7-4674-b383-2e63318d684c
Instance ID                     : uuid:0fdc34da-058a-4e05-a9a3-fe13239d7eb3
Format                          : application/pdf
Title                           : 010COV.indd
Creator                         : Administrator
Page Count                      : 91

EXIF Metadata provided by EXIF.tools