Sony Group WS001 Wireless Module User Manual Short Term Confidential REV
Sony Corporation Wireless Module Short Term Confidential REV
(Short-Term Confidential) User Manual_REV
![](/img.php?id=2120946&img=bg1.png)
[For U.S.A]
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
CAUTION
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to
operate this equipment.
The following FCC statement applies only to the version of this
The following statement must be described on the user
manual of the host device of this module.
The following FCC statement applies only to the version of this
model manufactured for sale in the U.S.A. Other versions may
not comply with FCC technical regulations.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is the
passed down through the MAC, through the digital and analog
baseband, and finally to the RF chip. Several special packets are
initiated by the MAC. These are the only ways the digital
baseband portion will turn on the RF transmitter, which it then
turns off at the end of the packet. Therefore, the transmitter will
be on only while one of the aforementioned packets is being
transmitted. In other words, this device automatically
discontinue transmission in case of either absence of information
to transmit or operational failure.
![](/img.php?id=2120946&img=bg2.png)
Frequency Tolerance: ±20 ppm or less
5.15-5.25GHz band is restricted to indoor operations only.
This equipment must not be co-located or operated in
conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment and meets the FCC radio
frequency (RF) Exposure Guidelines. dŚŝƐĞƋƵŝƉŵĞŶƚƐŚŽƵůĚďĞ
ŝŶƐƚĂůůĞĚĂŶĚŽƉĞƌĂƚĞĚŬĞĞƉŝŶŐƚŚĞƌĂĚŝĂƚŽƌĂƚůĞĂƐƚϮϬĐŵŽƌŵŽƌĞ
ĂǁĂLJĨƌŽŵƉĞƌƐŽŶ͛ƐďŽĚLJŝŶŶŽƌŵĂůƵƐĞƉŽƐŝƚŝŽŶ͘
![](/img.php?id=2120946&img=bg3.png)
[For Canada]
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference,
including interference that may cause undesired operation of the
device.
5.15-5.25GHz band is restricted to indoor operations only.
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment and meets RSS-102 of
the IC radio frequency (RF) Exposure rules. This equipment has
the IC radio frequency (RF) Exposure rules. This equipment
ƐŚŽƵůĚďĞŽƉĞƌĂƚĞĚŬĞĞƉŝŶŐƚŚĞƌĂĚŝĂƚŽƌĂƚůĞĂƐƚϮϬĐŵŽƌŵŽƌĞ
ĂǁĂLJĨƌŽŵƉĞƌƐŽŶ͛ƐďŽĚLJŝŶŶŽƌŵĂůƵƐĞƉŽƐŝƚŝŽŶ͘
![](/img.php?id=2120946&img=bg4.png)
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence.
L‘exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le
fonctionnement.
[Pour le Canada]
La bande 5 150-5 250 MHz est restreints à une utilisation à
l’intérieur.
Cet équipement est conforme aux limites d’exposition aux
Cet équipement est conforme aux limites d’exposition aux
rayonnements énoncées pour un environnement non contrôlé
et respecte les règles d’exposition aux fréquences
radioélectriques (RF) CNR-102 de l’IC. ĞƚĠƋƵŝƉĞŵĞŶƚĚŽŝƚġƚƌĞ
ŝŶƐƚĂůůĠĞƚƵƚŝůŝƐĠĞŶŐĂƌĚĂŶƚƵŶĞĚŝƐƚĂŶĐĞĚĞϮϬĐŵŽƵƉůƵƐĞŶƚƌĞ
ůĞĚŝƐƉŽƐŝƚŝĨƌĂLJŽŶŶĂŶƚĞƚůĞĐŽƌƉƐĞŶƵƚŝůŝƐĂƚŝŽŶŶŽƌŵĂůĞ͘
![](/img.php?id=2120946&img=bg5.png)
Labeling of End products
The following information must be indicated on the host
device of this module;
[For U.S.A.]
Contains FCC ID : AK8WS001
or
Contains Transmitter module FCC ID : AK8WS001
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
interference that may cause undesired operation.
[For Canada]
Contains IC : 409B-WS001
or
Contains Transmitter module IC : 409B-WS001