Sony Group XNV770BT AV Navigation User Manual XNV 770BT 660BT U Manual US

Download:
Mirror Download [FCC.gov]
Document ID	1322935
Application ID	2Sv954vsDquCXzV7fuJhJQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	171.22kB (2140266 bits)
Date Submitted	2010-08-06 00:00:00
Date Available	2010-09-20 00:00:00
Creation Date	2010-08-06 14:59:10
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2010-08-06 14:59:10
Document Title	XNV-770BT_660BT_U_Manual_US.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	21598

E:\DATA\4197968111\4197968111XNV770BTU\01US+00COV-U.fm
masterpage:Right
01US+00COV-U.fm Page 1 Monday, June 7, 2010 1:53 PM
4-197-968-11 (1)
AV Navigation
AV Navigation
Operating Instructions
US
Mode d’emploi
FR
Manual de instrucciones
ES
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No.
Serial No.
XNV-770BT
XNV-660BT
©2010 Sony Corporation
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US01INT-U.fm
masterpage:Left
00US+00COV-U.book Page 2 Monday, June 7, 2010 1:53 PM
Be sure to install this unit in the dashboard of
the car for safety. For installation and
connections, see the supplied installation/
connections manual.
About this manual
• This manual contains instructions for XNV770BT and XNV-660BT.
• XNV-770BT is the model representatively
used for illustration purposes.
• For details on the navigation function, refer
to the leaflet (supplied by TomTom) for the
navigation module.
Warning
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
CAUTION
The use of optical instruments with this product
will increase eye hazard. As the laser beam used
in this CD/DVD player is harmful to eyes, do not
attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX
ÉTATS-UNIS. NON APPLICABLE AU
CANADA, Y COMPRIS LA PROVINCE DE
QUÉBEC.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
This device complies with Part 15 of the FCC
Rules and RSS-Gen of IC Rules. Operation is
subject to the following two conditions: (1) this
device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation of the device.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US01INT-U.fm
masterpage:Right
00US+00COV-U.book Page 3 Monday, June 7, 2010 1:53 PM
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency
(RF) Exposure rules. This equipment has very
low levels of RF energy that it deemed to
comply without maximum permissive exposure
evaluation (MPE). But it is desirable that it
should be installed and operated keeping the
radiator at least 20 cm or more away from
person’s body (excluding extremities: hands,
wrists, feet and ankles).
For the State of California, USA only
Perchlorate Material – special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Perchlorate Material: Lithium battery contains
perchlorate
Warning if your car’s ignition has no
ACC position
Be sure to set the Auto Off function
(page 53).
The unit will shut off completely and
automatically in the set time after the unit is
turned off, which prevents battery drain.
If you do not set the Auto Off function, press
and hold (SOURCE/OFF) until the display
disappears each time you turn the ignition off.
To cancel the demonstration (Demo) display,
see page 57.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US+00COV-UTOC.fm
masterpage:Left
00US+00COV-U.book Page 4 Monday, June 7, 2010 1:53 PM
Table of Contents
Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Notes on installation. . . . . . . . . . . . . . . . . . . . . . 7
Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Notes on Bluetooth. . . . . . . . . . . . . . . . . . . . . . . 9
Playable discs and symbols used in this
manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Location and function of controls . . . . . . . . . . 11
Main unit . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Card remote commander RM-X170 . . . . . .14
Getting Started
Resetting the unit . . . . . . . . . . . . . . . . . . 16
Advanced Operations — Discs
Using PBC functions — Playback control . . . 25
Configuring audio settings . . . . . . . . . . . . . . . 26
Changing the audio language/format . . . . . 26
Changing the audio channel . . . . . . . . . . . . 26
Adjusting the audio output level
— Dolby D level. . . . . . . . . . . . . . . . . . . . . 26
Locking discs — Parental control . . . . . . . . . . 27
Activating parental control . . . . . . . . . . . . . 27
Changing the area and its movie rating
level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Repeat and shuffle play . . . . . . . . . . . . . . . . . . 27
Direct search play . . . . . . . . . . . . . . . . . . . . . . 28
Performing initial settings . . . . . . . . . . . 16
Preparing the card remote
commander . . . . . . . . . . . . . . . . . . . . . . . 16
Basic Operations
Using the navigation function. . . . . . . . 17
Listening to the radio. . . . . . . . . . . . . . . 18
Playing discs . . . . . . . . . . . . . . . . . . . . . 20
Advanced Operations — Radio
Storing and receiving stations . . . . . . . . . . . . .24
Storing automatically — BTM . . . . . . . . . . 24
Storing manually . . . . . . . . . . . . . . . . . . . . . 24
Receiving stored stations . . . . . . . . . . . . . . .24
RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Selecting PTY . . . . . . . . . . . . . . . . . . . . . . .25
Setting CT . . . . . . . . . . . . . . . . . . . . . . . . . .25
USB Device Operations
Playing a USB device . . . . . . . . . . . . . . . . . . . 29
Repeat and shuffle play . . . . . . . . . . . . . . . . . . 29
Enjoying music according to your mood
— SensMe™ . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Before using the SensMe™ function . . . . . 30
Installing “SensMe™ Setup” and “Content
Transfer” in your computer. . . . . . . . . . . . . 30
Registering a USB device using “SensMe™
Setup” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Transferring tracks to the USB device using
“Content Transfer” . . . . . . . . . . . . . . . . . . . 31
Playing tracks in the channel
— SensMe™ channels . . . . . . . . . . . . . . . . 31
Playing tracks in the mood map
— SensMe™ mood. . . . . . . . . . . . . . . . . . . 33
iPod Operations
Playing an iPod . . . . . . . . . . . . . . . . . . . . . . . . 34
Setting the play mode . . . . . . . . . . . . . . . . . . . 34
Repeat and shuffle play . . . . . . . . . . . . . . . . . . 35
Operating an iPod directly
— Passenger control . . . . . . . . . . . . . . . . . . . . 35
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US+00COV-UTOC.fm
masterpage:Right
00US+00COV-U.book Page 5 Monday, June 7, 2010 1:53 PM
Useful Functions
Sound Adjustment
Listing up tracks/images/video files
— List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Selecting a track/image/video file. . . . . . . . 36
Selecting a file type. . . . . . . . . . . . . . . . . . . 36
Selecting the sound quality — EQ7 . . . . . . . . 47
Customizing the equalizer curve
— EQ7 Tune . . . . . . . . . . . . . . . . . . . . . . . 47
Searching a track by listening to track passages
— ZAPPIN™ . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using Gesture Command . . . . . . . . . . . . . . . . 37
Handsfree Calling and Audio
Streaming — Bluetooth
Before using the Bluetooth function . . . . . . . . 37
Basic procedure of the Bluetooth
function . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Bluetooth status indication . . . . . . . . . . . . . 38
Installing the external microphone . . . . . . . 38
Adjusting the sound characteristics . . . . . . . . 48
Optimizing sound for the listening position
— Intelligent Time Alignment . . . . . . . . . . . . 48
Precisely calibrating the listening position
— Intelligent Time Alignment Tune . . . . . 49
Speaker configuration and volume setup . . . .
Creating a virtual center speaker
— CSO . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using rear speakers as subwoofer
— RBE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the speaker volume . . . . . . . . . .
49
49
49
50
Monitor Adjustment
Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Searching from this unit . . . . . . . . . . . . . . . 38
Searching from the Bluetooth device . . . . . 39
Adjusting the monitor angle
(XNV-770BT only). . . . . . . . . . . . . . . . . . . . . 50
Connecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Touch panel calibration . . . . . . . . . . . . . . . . . 50
Handsfree calling . . . . . . . . . . . . . . . . . . . . . . . 40
Making calls . . . . . . . . . . . . . . . . . . . . . . . . 40
Receiving calls . . . . . . . . . . . . . . . . . . . . . . 42
Operations during a call . . . . . . . . . . . . . . . 42
Setting the background screen . . . . . . . . . . . . 51
Phonebook management . . . . . . . . . . . . . . . . . 42
Storing phonebook data . . . . . . . . . . . . . . . 43
Browsing a phonebook in a cellular
phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Deleting phonebook data . . . . . . . . . . . . . . 44
Editing a contact . . . . . . . . . . . . . . . . . . . . . 44
Selecting the picture quality
— Picture EQ . . . . . . . . . . . . . . . . . . . . . . . . . 51
Customizing the picture quality . . . . . . . . . 51
Selecting the aspect ratio . . . . . . . . . . . . . . . . 52
Settings
Basic setting operation . . . . . . . . . . . . . . . . . . 52
Call data management . . . . . . . . . . . . . . . . . . . 45
Call history . . . . . . . . . . . . . . . . . . . . . . . . . 45
Preset dial . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Locking the personal information . . . . . . . . 46
General settings. . . . . . . . . . . . . . . . . . . . . . . . 53
Audio streaming . . . . . . . . . . . . . . . . . . . . . . . 46
Listening to a Bluetooth device through
this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Operating the Bluetooth device with
this unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
DVD and other playback settings . . . . . . . . . . 58
Bluetooth settings . . . . . . . . . . . . . . . . . . . . . . 46
Using Optional Equipment
Sound settings . . . . . . . . . . . . . . . . . . . . . . . . . 55
Screen settings . . . . . . . . . . . . . . . . . . . . . . . . 57
Setting the security code . . . . . . . . . . . . . . . . . 60
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . 60
Auxiliary audio/video equipment . . . . . . . . . . 61
Rear view camera . . . . . . . . . . . . . . . . . . . . . . 61
Rear view camera settings . . . . . . . . . . . . . 62
continue to next page t
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US+00COV-UTOC.fm
masterpage:Left
00US+00COV-U.book Page 6 Monday, June 7, 2010 1:53 PM
Additional Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Notes on LCD panel . . . . . . . . . . . . . . . . . .62
Notes on discs . . . . . . . . . . . . . . . . . . . . . . .63
Playback order of MP3/WMA/AAC/JPEG/
MPEG-4 files. . . . . . . . . . . . . . . . . . . . . . . .63
About MP3 files . . . . . . . . . . . . . . . . . . . . .64
About WMA files . . . . . . . . . . . . . . . . . . . .64
About AAC files . . . . . . . . . . . . . . . . . . . . .64
About JPEG files . . . . . . . . . . . . . . . . . . . . . 64
About MPEG-4 files . . . . . . . . . . . . . . . . . .64
About iPod. . . . . . . . . . . . . . . . . . . . . . . . . . 64
About Bluetooth function . . . . . . . . . . . . . .65
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . .68
Error displays/messages . . . . . . . . . . . . . . .71
Language code/area code list . . . . . . . . . . . . . . 73
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Support site
If you have any questions or for the latest support information on this
product, please visit the web site below:
http://esupport.sony.com
http://www.sony.com/mobileAV
Provides information on:
• Models and manufacturers of compatible digital audio players
• Models and manufacturers of compatible cellular phones and the FAQ
about Bluetooth function
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 7 Monday, June 7, 2010 1:53 PM
Notes on safety
• Comply with your local traffic rules, laws and
regulations.
• While driving
– Do not watch or operate the unit, as it may lead
to distraction and cause an accident. Park your
car in a safe place to watch or operate the unit.
– Do not use the setup feature or any other
function which could divert your attention from
the road.
– When backing up your car, be sure to
look back and watch the surroundings
carefully for your safety, even if the rear
view camera is connected. Do not
depend on the rear view camera
exclusively.
• While operating
– Do not insert your hands, fingers or foreign
object into the unit while functioning, as it may
cause injury or damage to the unit.
– Keep small articles out of the reach of children.
– Be sure to fasten seatbelts to avoid injury in the
event of a sudden movement of the car.
Preventing an accident
Pictures appear only after you park the car and set
the parking brake.
If the car starts moving during video playback,
the picture is automatically switched to the
background screen after displaying the caution
below.
Notes on installation
• We recommend this unit should be installed by a
qualified technician or service personnel.
– If you try to install this unit by yourself, see the
supplied installation/connections manual and
install the unit properly.
– Improper installation may cause battery drain or
a short circuit.
• If the unit does not work properly, check the
connections first, referring to the supplied
installation/connections manual. If everything is in
order, check the fuse.
• Protect the unit surface from damage.
– Do not expose the unit surface to chemicals,
such as insecticide, hair spray, insect repellent,
etc.
– Do not leave rubber or plastic materials in
contact with the unit for a long time. Otherwise,
the finish of the unit may be impaired, or
deformation may occur.
• When installing, be sure to fix securely.
• When installing, be sure to turn the ignition off.
Installing the unit with the ignition on may cause
battery drain or a short circuit.
• When installing, be sure not to damage any car
parts such as pipes, tubes, fuel tank or wiring by
using a drill, as it may cause a fire or an accident.
“Video blocked for your safety.”
The monitor connected to the REAR VIDEO
OUT is active while the car is in motion.
The picture on the display is switched to the
background screen, but audio source can be
heard.
Do not operate the unit or watch the monitor
while driving.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 8 Monday, June 7, 2010 1:53 PM
This product uses font data which is licensed to
Sony by Monotype Imaging Inc. or its affiliates.
Copyrights
Manufactured under license
from Dolby Laboratories.
“Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
Microsoft, Windows, Windows Vista and Windows
Media and logos are trademarks or registered
trademarks of Microsoft Corporation in the United
States and/or other countries.
“DVD VIDEO,” “DVD-R,” “DVD-RW,” “DVD+R,”
and “DVD+RW” are trademarks.
The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corporation is under license. Other
trademarks and trade names are those of their
respective owners.
ZAPPIN is a trademark of Sony Corporation.
12 TONE ANALYSIS and its
logo are trademarks of Sony
Corporation.
“WALKMAN” and
“WALKMAN” logo are
registered trademarks of
Sony Corporation.
SensMe and the SensMe logo are
trademarks or registered
trademarks of Sony Ericsson
Mobile Communications AB.
Music recognition technology and related data are
provided by Gracenote®. Gracenote is the industry
standard in music recognition technology and
related content delivery. For more information,
please visit www.gracenote.com.
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
Apple, Macintosh and iTunes are trademarks of
Apple Inc., registered in the U.S. and other
countries.
TomTom is a trademark of TomTom International
B.V.
THIS PRODUCT IS LICENSED UNDER THE
MPEG-4 VISUAL PATENT PORTFOLIO
LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER FOR
DECODING MPEG-4 VIDEO THAT WAS
ENCODED BY A CONSUMER ENGAGED IN A
PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG LA
TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY
OTHER USE. ADDITIONAL INFORMATION
INCLUDING THAT RELATING TO
PROMOTIONAL, INTERNAL AND
COMMERCIAL USES AND LICENSING MAY
BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM
HD RadioTM is a proprietary trademark of
iBiquity Digital Corp.
The “SAT Radio Ready”
logo indicates that this
product will control a satellite
radio tuner module (sold
separately). Please see your nearest authorized
Sony dealer for details on the satellite radio
tuner module.
“SAT Radio,” “SAT Radio Ready,” the SAT
Radio and SAT Radio Ready logos and all
related marks are trademarks of Sirius XM
Radio Inc. and XM Satellite Radio Inc.
CD and music-related data from Gracenote, Inc.,
copyright © 2000-2010 Gracenote. Gracenote
Software, copyright © 2000-2010 Gracenote. This
product and service may practice one or more of
the following U.S. Patents: #5,987,525;
#6,061,680; #6,154,773, #6,161,132, #6,230,192,
#6,230,207, #6,240,459, #6,330,593, and other
patents issued or pending. Some services supplied
under license from Open Globe, Inc. for U.S.
Patent: #6,304,523.
Gracenote and CDDB are registered trademarks of
Gracenote. The Gracenote logo and logotype, and
the “Powered by Gracenote” logo are trademarks
of Gracenote.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 9 Monday, June 7, 2010 1:53 PM
Notes on Bluetooth
Caution
IN NO EVENT SHALL SONY BE LIABLE FOR
ANY INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES OR OTHER
DAMAGES INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFITS, LOSS OF
REVENUE, LOSS OF DATA, LOSS OF USE OF
THE PRODUCT OR ANY ASSOCIATED
EQUIPMENT, DOWNTIME, AND
PURCHASER’S TIME RELATED TO OR
ARISING OUT OF THE USE OF THIS
PRODUCT, ITS HARDWARE AND/OR ITS
SOFTWARE.
IMPORTANT NOTICE!
Safe and efficient use
Changes or modifications to this unit not expressly
approved by Sony may void the user’s authority to
operate the equipment.
Please check for exceptions, due to national
requirement or limitations, in usage of Bluetooth
equipment before using this product.
Driving
Check the laws and regulations on the use of cellular
phones and handsfree equipment in the areas where
you drive.
Always give full attention to driving and pull off the
road and park before making or answering a call if
driving conditions so require.
Radio frequency exposure
RF signals may affect improperly installed or
inadequately shielded electronic systems in cars,
such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed
control systems or air bag systems. For installation
or service of this device, please consult with the
manufacturer or its representative of your car. Faulty
installation or service may be dangerous and may
invalidate any warranty that may apply to this
device.
Consult with the manufacturer of your car to ensure
that the use of your cellular phone in the car will not
affect its electronic system.
Check regularly that all wireless device equipment
in your car is mounted and operating properly.
Emergency calls
This Bluetooth car handsfree and the electronic
device connected to the handsfree operate using
radio signals, cellular, and landline networks as well
as user-programmed function, which cannot
guarantee connection under all conditions.
Therefore do not rely solely upon any electronic
device for essential communications (such as
medical emergencies).
Remember, in order to make or receive calls, the
handsfree and the electronic device connected to the
handsfree must be switched on in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use.
Check with your local service provider.
Connecting to other devices
When connecting to any other device, please read its
user guide for detailed safety instructions.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 10 Monday, June 7, 2010 1:53 PM
Playable discs and symbols used in this manual
This unit can play various video/audio discs.
The following chart helps you to check if a disc is supported by this unit, as well as what functions are
available for a given disc type.
Disc symbol in manual
Disc format
DVD VIDEO
VIDEO
DVD-R*1 / DVD-R DL*1 / DVD-RW*1
(Video mode/VR mode)
DVD+R*1 / DVD+R DL*1 / DVD+RW*1
AUDIO
Video CD
(Ver. 1.0/1.1/2.0)
Audio CD
CD-ROM*2 / CD-R*2 / CD-RW*2
*1 Audio files can also be stored.
*2 Video/image files can also be stored.
Note
“DVD” may be used in this manual as a general term for DVD VIDEOs, DVD-Rs/DVD-RWs, and DVD+Rs/
DVD+RWs.
The following chart shows the supported compression formats and their file types.
Available functions differ depending on the format, regardless of disc type. The format symbols below
appear next to the description of functions available for that format.
Format symbol in manual
File type
MP3 audio file
WMA audio file
AAC audio file
JPEG image file
MPEG-4
MPEG-4 video file
Tip
For details on compression formats, see page 64.
Note
Even compatible discs may not be playable on this unit, depending on their recorded condition.
10
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 11 Monday, June 7, 2010 1:53 PM
Location and function of controls
Main unit
XNV-770BT
VOL
TOP
Refer to the pages listed for details.
A Disc slot (located behind the front panel)
page 20
B VOL (Volume) –/+*1 buttons
C Receptor for the card remote
commander
D Display window/touch panel
E Reset button page 16
(Bluetooth) signal indicator
page 38
4 56
SOURCE
7 8
OFF
G TOP button
To open the top menu.
H SOURCE/OFF button*2
Press to turn on the power/change the source:
“Tuner” (Radio), “Disc,” “AUX” (Auxiliary
equipment), “USB/iPod,” “BT Audio”
(Bluetooth Audio).
Press for 1 second to turn off the power.
Press for more than 2 seconds to shut off
completely.
I Z (Open/Close) button page 20
*1 The VOL + button has a tactile dot.
*2 If an HD Radio tuner or SAT tuner is connected:
when (SOURCE/OFF) is pressed, the connected
device (“HD Radio,” “XM” or “Sirius”) will appear in
the display.
continue to next page t
11
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 12 Monday, June 7, 2010 1:53 PM
XNV-660BT
Refer to the pages listed for details.
(Bluetooth) signal indicator
page 38
A Z (Eject) button page 20
G Volume control dial
B Reset button page 16
C Receptor for the card remote
commander
D Disc slot page 20
E TOP button
To open the source list.
H SOURCE/OFF button*
Press to turn on the power/change the source:
“Tuner” (Radio), “Disc,” “AUX” (Auxiliary
equipment), “USB/iPod,” “BT Audio”
(Bluetooth Audio).
Press for 1 second to turn off the power.
Press for more than 2 seconds to shut off
completely.
I Display window/touch panel
* If an HD Radio tuner or SAT tuner is connected:
when (SOURCE/OFF) is pressed, the connected
device (“HD Radio,” “XM” or “Sirius”) will appear in
the display.
12
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 13 Monday, June 7, 2010 1:53 PM
A “Source List” key
To open the source list.
Screen displays
When no source is selected:
2 3
Source List
Navi
Top
B “Navi”/“Navigation” key
To enter the navigation mode.
C “Top” key
To open the top menu.
D Clock display page 57, 60
12:00
Top menu:
Navigation
M.OFF
AV Source
BT Phone
qa
8 3
ATT
Tuner
Top
Disc
SensMe™
(Switch view) key
To select the view mode: “Navigation Only,”
“Dual Screen Navi + A/V (Large),” “Dual
Screen Navi + A/V (Small).”
(Setting) key
To open the setting menu.
AUX
BT Audio
J “AV Source” key
To open the source list.
K “BT Phone” key
To enter the Bluetooth Phone mode.
Source list:
I “M.OFF” (Monitor off) key
To turn off the monitor and the button
illumination. To turn back on, touch
anywhere on the display.
12:00
F “ATT” (Attenuate) key*1
To attenuate the sound. To cancel, touch
again.
7 8 9
ATT
(Close) key
To close the menu.
USB/iPod
L Source select keys*2
To change the source: “Tuner” (Radio),
“Disc,” “AUX” (Auxiliary equipment),
“USB/iPod,” “SensMe™,” “BT Audio”
(Bluetooth Audio).
*1 Appears only when a source is selected.
*2 If an HD Radio tuner or SAT tuner is connected: to
select the connected device, touch “External,” then
“HD Radio,” “XM” or “Sirius.”
External
12:00
qs
13
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 14 Monday, June 7, 2010 1:53 PM
Card remote commander RM-X170
q;
qa
qs
qd
qf
• The card remote commander can be generally
used to operate the audio controls simply. For
menu operations, use the touch panel.
• Refer to the pages listed for details.
• Remove the insulation film before use
(page 16).
A OFF button
Press to turn off/stop the source.
Press and hold to shut off completely.
14
qg
qh
E EQ (Equalizer) button
To select an equalizer curve from 7 music
types (“Xplod”/“Vocal”/“Edge”/“Cruise”/
“Space”/“Gravity”/“Custom”/“OFF”).
F Number buttons page 28
Radio:
Press to receive stored stations.
Press and hold to store stations.
Disc/USB:
To locate a title/chapter/track.
B MONITOR OFF button
To turn off the monitor and the button
illumination. To turn back on, press again.
G CLEAR button
To delete an entered number.
C POSITION button
To switch the listening position (“Front L”/
“Front R”/“Front”/“All”/“Custom”/“OFF”).
H ATT (Attenuate) button
To attenuate the sound. To cancel, press
again.
D O (Return) button
To return to the previous display/return to the
menu on a VCD*1.
I u (Play/Pause) button
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 15 Monday, June 7, 2010 1:53 PM
J .m/M> buttons
Radio:
Press to tune in stations automatically.
Press and hold to find a station manually.
Disc*2/USB:
Press to skip a chapter/track/scene/file.
Press and hold momentarily to reverse/fastforward the video.
Press and hold to reverse/fast-forward track.
Bluetooth Audio*3:
Press to skip a track.
Press and hold to reverse/fast-forward track.
K DVD playback setting buttons
(AUDIO):
To change the audio language/format.
(For VCD/CD/MP3/WMA/AAC/MPEG-4,
to change the audio channel.)
(SUBTITLE):
To change the subtitle language.
(ANGLE):
To change the viewing angle.
(TOP MENU):
To open the top menu on a DVD.
(MENU):
To open the menu on a disc.
*1 When playing with PBC function.
*2 Operation differs depending on the disc (page 22).
*3 Operation differs depending on the connected
Bluetooth device.
*4 If an HD Radio tuner or SAT tuner is connected:
when (SRC) is pressed, the connected device
(“HD Radio,” “XM” or “Sirius”) will appear in the
display. Furthermore, if (MODE) is pressed, you
can switch the HD Radio tuner band or SAT tuner
band.
*5 When two auxiliary devices are used.
*6 When two or more external devices are used.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE/OFF) on the main unit is pressed, or
a disc is inserted to activate the unit first.
L ZAP button
To enter the ZAPPIN™ mode.
M .
Scanning stops when the unit receives a station. Repeat this procedure until the desired station
is received.
To tune manually
Touch m/M repeatedly until the desired frequency is received.
To skip frequencies continuously, touch and hold m/M.
18
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 19 Monday, June 7, 2010 1:53 PM
Reception controls
Touch the display if the reception controls are not shown.
Source List
ATT
Navi
Top
Preset
List
PTY
List
Band
Receive
Menu
15
12:00
67
No. Item
Touch to
“Source List”
open the source list. (page 13)
“ATT”
attenuate the sound. To cancel, touch again.
“Navi”
enter the navigation mode. (page 17)
“Top”
open the top menu. (page 13)
m/M
tune manually.
Touch and hold to skip frequencies continuously.
./>
tune automatically.
“Band”
open the band list and change the band.
“Receive Menu”
open the receive menu, which contains the following.
• “Mono”: Touch to activate the monaural mode if FM reception
is poor. To restore stereo reception, select “OFF.”
• “Local”: Touch to only tune into stations with stronger signal.
To tune normal stations, select “OFF.”
• “IF”: Touch to set to “Wide” to hear FM stereo broadcasts in
stereo and with full frequency reception. To narrow the
reception frequency automatically to eliminate noise, select
“Auto.”
“Preset List”
list up stored stations, or store stations. (page 24)
“PTY List”
open the PTY list. (page 25)
Indications during reception
Source List
ATT
Navi
Top
A Current source icon*1
B Band number, Preset number*2, Frequency/status
C Volume level*3
D Setting status (CSO, EQ7, RBE)
*1 Appears only when the controls are shown.
*2 Appears only when the station stored in memory is
received.
*3 When ATT is activated,
appears.
Band
Receive
Menu
15
Preset
List
PTY
List
12:00
19
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 20 Monday, June 7, 2010 1:53 PM
Playing discs
Depending on the disc, some operations may be different or restricted.
Refer to the operating instructions supplied with your disc.
XNV-770BT
Press Z on the main unit.
The front panel opens automatically.
Insert the disc (label side up).
The front panel closes automatically, then playback starts.
XNV-660BT
Insert the disc (label side up).
Playback starts automatically.
If the DVD menu appears
Touch the item in the DVD menu directly.
You can also use the menu control panel which can be shown by touching the display in a place other
than menu item area. Touch b/v/V/B to move the cursor, then “Enter” to confirm.
If the menu control panel does not appear by touching the display, use the card remote commander.
About the DVD menu
A DVD is divided into several sections, which make up a picture or music feature. These sections are called “titles.”
When you play a DVD that contains several titles, you can select a desired title using the DVD’s top menu. For
DVDs that allow you to select items such as subtitle/sound language(s), select these items using the DVD menu.
If the disc contains JPEG files
The slide show starts automatically.
To stop playback
Press (SOURCE/OFF) for 1 second.
Note
Discs in DTS format are not supported. The sound is not output if the DTS format is selected.
To eject the disc
XNV-770BT
Press Z on the main unit.
The front panel opens automatically, then the disc is ejected.
Press Z on the main unit to close the front panel.
Note
The front panel closes automatically after the caution alarm sounds.
XNV-660BT
Press Z on the main unit.
20
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 21 Monday, June 7, 2010 1:53 PM
Playback controls
Touch the display if the playback controls are not shown.
Common to all discs/formats
Source List
ATT
Navi
Top
DVD
Control
ATT
Navi
Play Menu
SHUF
15
Source List
DVD
Control
12:00
Top
Play Menu
SHUF
15
12:00
MPEG-4
Source List
ATT
Navi
Top
Source List
ATT
Navi
Play Menu
SHUF
PBC Panel
List
Top
Play Menu
SHUF
Album
15
12:00
Source List
15
12:00
qa
qa
ATT
Navi
ZAP
List
Top
Play Menu
SHUF
Album
15
12:00
qs
continue to next page t
21
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 22 Monday, June 7, 2010 1:53 PM
No. Item
Touch to
“Source List”
open the source list. (page 13)
“ATT”
attenuate the sound. To cancel, touch again.
“Navi”
enter the navigation mode. (page 17)
“Top”
open the top menu. (page 13)
./>
skip a chapter/track/scene/image/file.
Touch and hold momentarily to reverse/fast-forward the video;
and then repeatedly to switch the speed (× 2 t × 12 t × 120
t × 2…)*1. To cancel, touch u.
Touch and hold to reverse/fast-forward the audio track.
During pause, touch and hold down > to play the video in
slow motion. To cancel, release the key.
pause/resume play after pause.
“Play Menu”
open the play menu, which contains the following.
• “Repeat”/“Shuffle” (page 27)
• “Dolby D Level” (DVD VIDEO playback only) (page 26)
• “Stereo” (VCD/CD/MP3/WMA/AAC playback only)
(page 26)
• “Image Turn” (JPEG playback only): Touch to rotate an
image left/right.
• “Audio” (MPEG-4 playback only) (page 26)
“DVD Control”
open the DVD control menu, which contains the following.
• “Audio”: Touch repeatedly to select the audio language/
format. (page 26)*2
• “Subtitle”: Touch repeatedly to turn off/select the subtitle
language.*2*3
• “Angle”: Touch repeatedly to change the viewing angle.*2
• “Top Menu”: Touch to open the top menu on the DVD.*2
• “Menu”: Touch to open the menu on the disc.*2
“PBC Panel”
show the control panel for the PBC menu. (page 25)
“Album” –/+
skip an album (folder) of MP3/WMA/AAC/JPEG/MPEG-4.
qa
“List”
list up tracks/images/video files. (page 36)
qs
“ZAP”
enter the ZAPPIN mode. (page 36)
*1 The speed depends on the format or the recording method.
*2 Unavailable depending on the disc.
*3 When the 4-digit input prompt appears, input the language code (page 73) for the desired language.
Note
If the disc contains multiple file types, only the selected file type (audio/video/image) can be played. For details on
how to select the file type, see “Selecting a file type” on page 36.
Notes on JPEG playback
• If a large-sized image is rotated, it may take longer to display.
• Progressive JPEG files cannot be displayed.
22
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 23 Monday, June 7, 2010 1:53 PM
Indications during playback
Touch the display to show the indications.
For audio discs, some indications are always shown during playback.
MPEG-4
Source List
ATT
Navi
DVD
Control
Play Menu
SHUF
15
12:00
Source List
Top
ATT
Navi
ZAP
List
Top
A Current source icon
B Volume level*1
C Format, Playback status, Elapsed playback
time*2, Chapter/title/album (folder)/track
number*3*4, Audio Format*5, Setting status
(CSO, EQ7, RBE)
D Playback status, Elapsed playback time*2
E Track name, Album name, Artist name
F Album artwork display*6
G Format, Track number, Album number*7, Setting
status (CSO, EQ7, RBE)
*1 When ATT is activated,
appears.
*2 During JPEG playback or VCD playback with the PBC
function, no indication appears.
*3 Indications differ depending on the disc/format.
*4 When playing a VCD with the PBC function (page 25),
no indication appears.
*5 DVD only.
*6 The recommended size is from 240 × 240 to 960 × 960
pixels.
*7 MP3/WMA/AAC only.
Play Menu
SHUF
Album
15
12:00
23
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 24 Monday, June 7, 2010 1:53 PM
Advanced Operations — Radio
Storing and receiving stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically — BTM
Touch “Source List,” then “Tuner.”
To change the band, touch “Band,” then select
the desired band (“FM1,” “FM2,” “FM3,”
“AM1” or “AM2”).
RDS
Overview
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio program signal.
Display items
Source List
ATT
Top
Preset
List
PTY
List
Touch “Preset List,” then “BTM.”
The unit stores stations in order of frequency
in the preset list (“P1” to “P6”).
A beep sounds when the setting is stored.
Band
Storing manually
Navi
While receiving the station that you
want to store, touch “Preset List.”
Touch “Memory,” then touch the
number in the list (“P1” to “P6”).
The number and the confirmation display
appear on the display.
Touch “Yes.”
The station is stored.
Note
If you try to store another station on the same number,
the previously stored station will be replaced.
Receiving stored stations
Select the band, then touch “Preset
List.”
Touch the desired number (“P1” to
“P6”).
15
Receive
Menu
12:00
A Band number, Preset number, Frequency
B Stereo*1, RDS*2
C Program service name
D Clock display
*1 During FM reception.
*2 During RDS reception.
RDS services
This unit automatically provides RDS services as
follows:
PTY (Program Types)
Displays the currently received program type.
Also searches your selected program type.
CT (Clock Time)
The CT data from the RDS transmission sets
the clock.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or if the station you are tuned to is not transmitting
RDS data.
24
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 25 Monday, June 7, 2010 1:53 PM
Selecting PTY
Advanced Operations — Discs
During FM reception, touch “PTY List.”
The PTY list appears if the station is
transmitting PTY data.
To scroll the list, touch v/V.
Using PBC functions
— Playback control
Touch the desired program type.
The unit searches for a station broadcasting
the selected program type.
To close the PTY list, touch “PTY List.”
The PBC menu interactively assists with
operations while a PBC compatible VCD is
played.
Start playing a PBC compatible VCD.
The PBC menu appears.
“News” (News), “Information”
(Information), “Sports” (Sports), “Talk”
(Talk), “Rock” (Rock), “Classic Rock”
(Classic Rock), “Adult Hits” (Adult Hits),
“Soft Rock” (Soft Rock), “Top 40” (Top 40),
“Country” (Country), “Oldies” (Oldies),
“Soft” (Soft), “Nostalgia” (Nostalgia),
“Jazz” (Jazz), “Classical” (Classical),
“Rhythm and Blues” (Rhythm and Blues),
“Soft R & B” (Soft Rhythm and Blues),
“Foreign Language” (Foreign Language),
“Religious Music” (Religious Music),
“Religious Talk” (Religious Talk),
“Personality” (Personality), “Public”
(Public), “College” (College), “Weather”
(Weather)
Touch “PBC Panel.”
The menu control panel appears.
Touch the number keys to select the
desired item, then “Enter.”
Follow the instructions in the menu for
interactive operations.
To return to the previous display, press O.
To hide the controls, touch “Close.”
Type of programs
Playing without the PBC function
While the unit is off, touch “Source
List,” then
Touch “Visual.”
The visual setting menu appears.
Notes
• You cannot use this function in countries/regions
where no PTY data is available.
• You may receive a different radio program from the
one you select.
Touch v/V to scroll, then “Video CD
PBC” to set to “OFF.”
Start playing a VCD.
The PBC menu does not appear during
playback.
Setting CT
Notes
• The items on the menu, and operation procedures
differ depending on the disc.
• During PBC playback, the track number, playback
item, etc., do not appear in the playback display.
• Resume playback is unavailable during playback
without PBC.
Set “CT” to “ON” in setting (page 53).
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.
25
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 26 Monday, June 7, 2010 1:53 PM
Configuring audio settings
Changing the audio channel
Note
Discs in DTS format are not supported. The sound is
not output if the DTS format is selected.
Changing the audio language/
format
The audio language can be changed if the disc is
recorded with multilingual tracks. You can also
change the audio format when playing a disc
recorded in multiple audio formats (e.g., Dolby
Digital).
MPEG-4
When playing VCD/CD/MP3/WMA/AAC/
MPEG-4, you can select the right or left channel
sound to listen through both right and left
speakers.
The options are indicated below.
“2-Ch”: Standard stereo sound (default)
“L-Ch”: Left channel sound (monaural)
“R-Ch”: Right channel sound (monaural)
For VCD/CD/MP3/WMA/AAC
During playback, touch “DVD Control.”
Touch “Audio” repeatedly until the
desired audio language/format
appears.
For MPEG-4
Audio language
Source List
Audio
ATT
Navi
1: English
Audio
Subtitle
Top
Dolby D 3/2.1
Angle
Top Menu
DVD
Control
Play Menu
SHUF
12:00
Audio format/channel numbers*
The audio language switches among the
available languages.
When the 4-digit input prompt appears, input
the language code (page 73) for the desired
language.
When the same language is displayed two or
more times, the disc is recorded in multiple
audio formats.
* The format name and channel numbers appear as
follows.
Example: Dolby Digital 5.1 ch
Rear component × 2
Dolby D 3 / 2 . 1
Front component × 2 +
Center component × 1
During playback, touch “Play Menu,”
then “Audio” repeatedly until the
desired audio channel appears.
To close the play menu, touch “Play Menu.”
Note
You may not be able to change the audio setting
depending on the disc.
Menu
15
During playback, touch “Play Menu,”
then “Stereo” repeatedly until the
desired audio channel appears.
Tip
The operation by the card remote commander
(pressing (AUDIO) repeatedly) is also available.
Adjusting the audio output level
— Dolby D level
You can adjust the audio output level for a DVD
recorded in Dolby Digital format, to reduce the
volume level differences between disc and
source.
During playback, touch “Play Menu.”
Touch the “Adjust” box to set to “ON.”
Touch –/+ repeatedly to adjust the
output level.
The output level is adjustable in single steps,
between –10 and +10.
To close the play menu, touch “Play Menu.”
LFE component × 1
To close the DVD control menu, touch “DVD
Control.”
26
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 27 Monday, June 7, 2010 1:53 PM
Locking discs
— Parental control
* Excluding DVD-R/DVD-R DL/DVD-RW in VR mode.
You can lock a disc, or set playback restrictions
according to a predetermined level such as
viewer age. Restricted scenes can be blocked or
replaced with different scenes when a parental
control compatible DVD is played.
Changing the area and its movie
rating level
The restriction levels can be set depending on the
area and its movie ratings.
While the unit is off, touch “Source
List,” then
Touch “Visual.”
The visual setting menu appears.
Touch v/V to scroll, then “DVD
Parental Area.”
When parental control is already activated,
the display to enter your password appears.
To change the setting, enter your password.
The options appear.
Touch the desired area to apply its
movie ratings.
When you select “Other,” enter the area code
selecting from “Area code list” on page 73,
using the number keys.
Touch “DVD Parental Rating.”
The options appear.
The lower the number, the stricter the
restriction level.
Touch the desired rating.
The setting is complete.
Activating parental control
While the unit is off, touch “Source
List,” then
Touch “Visual.”
The visual setting menu appears.
Touch v/V to scroll, then “DVD
Parental Control.”
The password setting display appears.
Touch the number keys to enter your
password, then “OK.”
To confirm, touch the number keys to
reenter your password, then “OK.”
The setting is complete.
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
Deactivating parental control
1 Follow steps 1 to 3 above.
The parental unlock display appears.
2 Touch the number keys to enter your current
password.
“Parental Unlocked” appears, and the parental
control is deactivated.
To return to the previous display, touch “Back.”
Repeat and shuffle play
MPEG-4
During playback, touch “Play Menu,”
then the “Repeat” or “Shuffle” box
repeatedly until the desired option
appears.
Changing the password
Deactivate the parental control, then activate
again using the new password.
Source List
Navi
ATT
Chapter
OFF
ON
Repeat
Shuffle
Adjust
Top
Dolby D Level 0
DVD
Control
15
Play Menu
SHUF
12:00
Repeat or shuffle play starts.
To close the play menu, touch “Play Menu.”
continue to next page t
27
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 28 Monday, June 7, 2010 1:53 PM
The repeat options and switching order of each
disc/format are indicated below.
Disc/format
Options
“OFF”: Returns to normal play
mode.
“Chapter”: Repeats the
current chapter.
“Title”: Repeats the current
title.
*1
“OFF”: Returns to normal play
mode.
“Track”: Repeats the current
track.
“OFF”: Returns to normal play
mode.
“Track”: Repeats the current
track.
“Album”: Repeats the current
album (folder).
“OFF”: Returns to normal play
mode.
“Image”: Repeats the current
image.
“Album”: Repeats the current
album.
“OFF”: Returns to normal play
mode.
“Movie”: Repeats the current
video file.
“Album”: Repeats the current
album (folder).
MPEG-4
The shuffle options and switching order of each
disc/format are indicated below.
Disc/format
*1
Options
“OFF”: Returns to normal play
mode.
“Title”: Plays chapters in
current title in random order.
*1 Available only when playing version 1.0/1.1 VCD,
or version 2.0 VCD without PBC function.
*2 Excluding DVD-R/DVD-R DL/DVD-RW in VR
mode.
Direct search play
MPEG-4
You can directly locate a desired point by
specifying the title number, chapter number, etc.
During playback, press the number
buttons on the card remote
commander to enter an item (track,
title, etc.) number, then press (ENTER).
Playback starts from the beginning of the
selected point.
The search items of disc/format are as follows.
DVD: Title or chapter*1
VCD*2/CD/MP3/WMA/AAC: Track
JPEG: Image
MPEG-4: File
*1 The search item depends on the setting.
*2 Available only when playing a VCD without PBC
function.
Setting the search item (DVD only)
You can set the search item (title or chapter) for
DVD playback.
Touch “Source List,” then
Touch v/V to scroll, then “DVD Direct
Search” to set to “Chapter” or “Title.”
The setting is complete.
Touch “Visual.”
The visual setting menu appears.
To return to the previous display, touch “Back.”
“OFF”: Returns to normal play
mode.
“Disc”: Plays tracks in current
disc in random order.
“OFF”: Returns to normal play
mode.
“Album”: Plays tracks/images/
video files in current album
(folder) in random order.
MPEG-4
28
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 29 Monday, June 7, 2010 1:53 PM
USB Device Operations
For details on the compatibility of your USB
device, visit the support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
• MSC (Mass Storage Class) and MTP (Media
Transfer Protocol) type USB devices compliant
with the USB standard can be used.
• Corresponding codec is MP3 (.mp3), WMA
(.wma), AAC (.m4a), JPEG (.jpg) and MPEG-4
(.mp4).
• Backup of data in a USB device is
recommended.
Notes
• Connect the USB device after starting the engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before starting
the engine.
• A large-sized file may take time to start playing back.
Playing a USB device
Remove the cap from the USB
connector, and connect the USB
device to the USB connector.
Playback starts automatically.
If a USB device is connected, to start
playback, touch “Source List,” then “USB/
iPod.”
For details on the location of the USB connector,
see the supplied installation/connections manual.
About the controls and indications
during playback
You can control USB playback in the same way
as disc playback. For details, see “Playback
controls” on page 21.
For details on indications during playback, see
“Indications during playback” on page 23.
To stop playback
Press (SOURCE/OFF) for 1 second.
To disconnect the USB device
Notes on use
• Do not use USB devices so large or heavy that they
may fall down due to vibration, or cause a loose
connection.
• Do not leave a USB device in a parked car, as
malfunction may result.
• This unit cannot recognize USB devices via a USB
hub.
Notes on playback
• If a USB device contains multiple file types, only the
selected file type (audio/video/image) can be played.
For details on how to select the file type, see
“Selecting a file type” on page 36.
• Displayed indications will differ, depending on the
USB device, recorded format and settings. For
details, visit the support site.
• The maximum number of displayable data is as
follows.
– folders (albums): 256
– files (tracks): 2,000
• It may take time for playback to begin, depending on
the amount of recorded data.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) MP3/WMA/AAC file, elapsed
playing time may not display accurately.
• Playback of a lossless compression file is not
supported.
Repeat and shuffle play
During playback, touch “Play Menu,”
then the “Repeat” or “Shuffle” box
repeatedly until the desired option
appears.
Repeat or shuffle play starts.
The repeat options are as follows.
“OFF”: Returns to normal play mode.
“Track”/“Image”/“Movie”*1: Repeats the
current track/image/video file.
“Album”: Repeats the current album (folder).
“Drive”*2: Repeats the current drive.
The shuffle options are as follows.
“OFF”: Returns to normal play mode.
“Album”: Plays tracks/images/video files in the
current album (folder) in random order.
*1 Options depend on the file type.
*2 When two or more drives are created on the USB
device.
To close the play menu, touch “Play Menu.”
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
USB device may be damaged.
29
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 30 Monday, June 7, 2010 1:53 PM
Enjoying music according to
your mood — SensMe™
Sony’s unique “SensMe™ channels” and
“SensMe™ mood” features automatically group
tracks by channel or mood, and allow you to
enjoy music intuitively.
Before using the SensMe™
function
3 Transferring tracks to the USB device
using “Content Transfer”
In order to group tracks by channel or mood,
track sound patterns need to be analyzed by 12
TONE ANALYSIS, which is loaded in
“Content Transfer.”
With the USB device connected to your
computer, drag and drop tracks from Windows
Explorer or iTunes, etc., to “Content
Transfer.”
Both analysis and transfer of tracks will be
performed by “Content Transfer.”
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
Content
Transfer
1 Installing “SensMe™ Setup” and
“Content Transfer” in your computer
First install “SensMe™ Setup” and “Content
Transfer” from the supplied CD-ROM.
SensMe™
Setup
Content
Transfer
4 Connecting the USB device and
enjoying the SensMe™ function on the
unit
Connect the set up USB device. You can then
enjoy “SensMe™ channels” or “SensMe™
mood” on this unit.
2 Registering a USB device using
“SensMe™ Setup”
Connect a USB device to your computer, and
perform registration using “SensMe™ Setup”
to enable the SensMe™ function on this unit.
SensMe™
Setup
Tip
Registration can be performed either along with the
installation procedure or after installation.
SensMe™
Installing “SensMe™ Setup” and
“Content Transfer” in your
computer
Use of the supplied software (“SensMe™ Setup”
and “Content Transfer”) is required to enable the
SensMe™ function on this unit.
Install the software in your computer from the
supplied CD-ROM.
Insert the supplied CD-ROM into your
computer.
The Installation Wizard runs automatically.
Follow the on-screen instructions to
complete the installation.
30
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 31 Monday, June 7, 2010 1:53 PM
Registering a USB device using
“SensMe™ Setup”
Playing tracks in the channel
— SensMe™ channels
USB device registration is required to enable the
SensMe™ function on the unit.
“SensMe™ channels” automatically group tracks
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
If registration is not performed along with the
installation procedure, follow the steps below.
Start “SensMe™ Setup” on your
computer.
Connect a USB device to your
computer.
Complete registration following the
on-screen instructions.
Connect a USB device set up for the
SensMe™ function.
Touch “Source List,” then “SensMe™.”
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
Shuffle All
Energetic
Transferring tracks to the USB
device using “Content Transfer”
To enable the SensMe™ function on this unit,
tracks need to be analyzed and transferred to the
registered USB device, using “Content Transfer.”
Connect the registered USB device to
your computer.
For “WALKMAN,” connect with the MTP
mode.
For USB devices other than “WALKMAN,”
connect with the MSC mode.
“Content Transfer” starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
Drag and drop tracks from Windows
Explorer or iTunes, etc., to “Content
Transfer.”
The analysis and transfer of tracks start.
For details on operations, see the Help of
“Content Transfer.”
Note
The track analysis by 12 TONE ANALYSIS may take
time, depending on the computer environment.
Touch “channels.”
The channel list appears.
Relax
ZAP
15
12:00
Touch v/V to scroll the channel list.
Playback of the first track in the current
channel starts from the track’s most melodic
or rhythmical section*.
* May not be detected correctly.
Touch the desired channel.
Playback of tracks in the selected channel
starts.
Notes
• Depending on the track, it may not be detected
correctly or may be grouped in a channel not suited
to the track’s mood.
• If the connected USB device contains many tracks, it
may take time for “SensMe™ channels” to start, due
to data reading.
Tip
Tracks are played in random order. The order will vary
at each channel selection.
continue to next page t
Tip
Not only audio files but also image or video files can
be transferred using “Content Transfer.” For details,
see the Help of “Content Transfer.”
31
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 32 Monday, June 7, 2010 1:53 PM
Channel list
x Recommended, Shuffle All
“Morning” (5:00 AM – 9:59 AM)
“Daytime” (10:00 AM – 3:59 PM)
“Evening” (4:00 PM – 6:59 PM)
“Night” (7:00 PM – 11:59 PM)
“Midnight” (12:00 AM – 4:59 AM)
Tracks recommended for each time of day.
Set the clock (page 60) for the channel to be
displayed accurately.
“Shuffle All”: Plays all analyzed tracks in
random order.
x Basic channels
Plays tracks according to the music type.
“Energetic”: High-spirit tracks.
“Relax”: Calm tracks.
“Mellow”: Mellow, melancholy tracks.
“Upbeat”: Happy tracks to improve your
mood.
“Emotional”: Ballad tracks.
“Lounge”: Lounge music.
“Dance”: Rhythm and rap, rhythm and blues
tracks.
“Extreme”: Intense rock tracks.
Controls and indications during
“SensMe™ channels” playback
Shuffle All
Energetic
Relax
ZAP
15
12:00
G H
A To show the control keys: “Source List,”
“ATT,” “Navi,” “Top.” (page 21)
B To scroll the list and select another channel.
C Indicates the current channel.
D Indicates the album artwork display*1.
E Indicates the elapsed playback time, track
name, artist name.
F To pause/resume play after pause.
G To skip a track.
H To enter the ZAPPIN mode. (page 36)
During ZAPPIN playback of “SensMe™
channels,” the most melodic or rhythmical
sections*2 of the tracks are played.
*1 The recommended size is from 240 × 240 to 960 ×
960 pixels.
*2 May not be detected correctly.
x In-car channels
Plays tracks that are suitable while driving.
“Freeway”: Speedy, high-spirit tracks.
“Chillout Drive”: Intoned, healing ballad
tracks.
“Weekend Trip”: Delightful, bright and happy
tracks.
“Midnight Cruise”: Jazz or piano-featured
tracks with mature mood.
“Party Ride”: Up-tempo and alive tracks.
“Morning Commute”: Bright and breezy
tracks.
“Goin’ Home”: Warm and relaxing tracks.
32
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 33 Monday, June 7, 2010 1:53 PM
Playing tracks in the mood map
— SensMe™ mood
“SensMe™ mood” distributes tracks as dots on a
two-axis mood map, based on the characteristics
of the individual tracks.
Controls and indications during
“SensMe™ mood” playback
Fast
By touching the point on the map according to
your mood, a circle appears around the touched
point, and the tracks inside the circle are played.
Mood
Style
Connect a USB device set up for the
SensMe™ function.
Sad
Happy
Time
ZAP
Slow
Touch “Source List,” then “SensMe™.”
Touch “mood.”
The two-axis mood map appears.
Fast
Mood
Type
Happy
Sad
Style
Time
ZAP
Slow
15
15
Circle
12:00
Dots representing tracks
Type
Touch the desired point on the map.
A circle appears around the touched point,
and playback of tracks inside the circle starts.
Playback of the first track starts from its most
melodic or rhythmical section*.
* May not be detected correctly.
12:00
HI
A To show the control keys: “Source List,”
“ATT,” “Navi,” “Top.” (page 21)
B To move the circle and regroup tracks.
C To change the size of the circle: small,
medium or large.
D Indicates the album artwork display*1.
E Indicates the elapsed playback time, track
name, artist name.
F To change parameters on the horizontal axis.
G To skip a track.
H To pause/resume play after pause.
I To enter the ZAPPIN mode. (page 36)
During ZAPPIN playback of “SensMe™
mood,” the most melodic or rhythmical
sections*2 of the tracks are played.
*1 The recommended size is from 240 × 240 to 960 ×
960 pixels.
*2 May not be detected correctly.
Changing parameters on the
horizontal axis
Notes
• Only the last 200 most recently transferred tracks
using “Content Transfer” are mapped.
• Depending on the track, it may not be detected
correctly or may be mapped in the position not
suited to the track’s mood.
• If the connected USB device contains many tracks, it
may take time for “SensMe™ mood” to start, due to
data reading.
In the mood map, you can change parameters on
the horizontal axis. Tracks are remapped
according to the characteristics of the
parameters.
“Mood”
“Sad” – “Happy”
Tips
• In the mood map, the currently played track is
indicated as a green dot.
• Tracks are played from the circle’s center outward.
“Type”
“Acoustic” – “Electronic”
“Style”
“Soft” – “Hard”
“Time”
“Morning” – “Midnight”
Touch
To change parameters to
33
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 34 Monday, June 7, 2010 1:53 PM
iPod Operations
For details on the compatibility of your iPod, see
“About iPod” on page 64 or visit the support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
In this manual, “iPod” is used as a general
reference for the iPod functions on the iPod and
iPhone, unless otherwise specified by the text or
illustrations.
Playing an iPod
Reduce the volume on this unit.
Remove the cap from the USB
connector, and connect the iPod to the
USB connector.
Use of the USB connection cable RC-200IPV
is recommended.*1
For details, see the supplied installation/
connections manual.
The following display appears on the iPod
screen*2, then playback starts from the item
last played.
If an iPod is already connected, to start
playback, touch “Source List,” then “USB/
iPod.”
To disconnect the iPod
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
iPod may be damaged.
About the resuming mode
When the iPod currently playing is connected to
the dock connector, the mode of this unit changes
to resuming mode and playback starts in the
mode set by the iPod.
In the resuming mode, repeat/shuffle setting is
not available.
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by iPhone itself. In order to avoid
sudden loud sound after a call, do not increase the
volume on the unit during a telephone call.
Note
This unit cannot recognize iPod via a USB hub.
Tips
• When the ignition key is turned to the ACC position
with the unit on, the iPod will be recharged.
• If the iPod is disconnected during playback, “USB
device is not connected.” appears in the display of
the unit.
Setting the play mode
You can set one of the following play modes.
For audio playback
“Album,” “Track,” “Genre,” “Playlist,”
“Artist,” “Podcast”*
For video playback
“Movie,” “Rental,” “TV Show,” “Music
Video,” “Playlist,” “Podcast”*
* May not appear depending on iPod setting.
*1 To play videos of iPod with video, use of RC200IPV is required.
RC-200IPV is supplied with XNV-770BT, and is
available as an optional extra for XNV-660BT.
*2 Display differs depending on the iPod, or may
not appear in the case of an iPod touch/iPhone
being connected, or when the iPod was last
played back using passenger control.
Adjust the volume on this unit.
About the controls and indications
during playback
During playback, touch “List.”
Touch “MUSIC” or “VIDEO.”
Touch the desired play mode.
To start playback, touch the desired item(s) in
the list.
To scroll the list, touch v/V.
To skip items of the selected play
mode
During playback, touch –/+ of the selected play
mode.
You can control iPod playback in the same way
as disc playback. For details, see “Playback
controls” on page 21.
For details on indications during playback, see
“Indications during playback” on page 23.
To stop playback
34 Press (SOURCE/OFF) for 1 second.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 35 Monday, June 7, 2010 1:53 PM
Repeat and shuffle play
During playback, touch “Play Menu,”
then the “Repeat” or “Shuffle” box
repeatedly until the desired option
appears.
Repeat or shuffle play starts.
To close the play menu, touch “Play Menu.”
The repeat options are as follows.
For audio playback
“OFF”: Returns to normal play mode.
“Track”: Repeats the current track.
“Album”/“Podcast”/“Artist”/“Playlist”/
“Genre”*: Repeats the current item of the
selected play mode.
For video playback
“OFF”: Returns to normal play mode.
“Track”: Repeats the current video.
“Rental”/“TV Show”/“Music Video”/
“Playlist”/“Podcast”*: Repeats the current
item of the selected play mode.
Operating an iPod directly
— Passenger control
You can directly operate an iPod connected to
this unit.
During playback, touch “Play Menu,”
then the “Passenger Control” box to
set to “ON.”
Deactivating the passenger control
Touch the “Passenger Control” box to set to
“OFF.”
The play mode changes to resuming mode.
To close the play menu, touch “Play Menu.”
Notes
• To output video to this unit, you need to activate the
video output of iPod.
• The volume can be adjusted only by this unit.
• The repeat setting will be off if the passenger control
mode is canceled.
The shuffle options are as follows.
For audio playback
“OFF”: Returns to normal play mode.
“Album”/“Podcast”/“Artist”/“Playlist”/
“Genre”*: Plays tracks of the selected play
mode in random order.
“Device”: Plays all tracks in an iPod in random
order.
* Differs depending on the selected play mode.
Note
Displayed options may not conform to actual
operation.
35
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 36 Monday, June 7, 2010 1:53 PM
Useful Functions
Listing up tracks/images/video
files — List
Selecting a track/image/video file
MPEG-4
You can list up albums/folders/tracks/images/
video files, and select a desired one to play.
This function is convenient especially for the
disc in MP3/WMA/AAC/JPEG/MPEG-4 format
or USB device containing many albums/tracks,
etc.
During audio playback, touch “ZAP.”
Playback starts from a passage of the next
track.
The passage is played for the set time, and a
beep sounds before the next passage starts.
“ZAP”
touched.
File 01
File 02
1/5
File 03
File 04
File 05
File 06
15
The playback section of each
track in ZAPPIN mode.
Touch “ZAP” when a track you want to
listen to is played back.
The track that you select returns to normal
play mode from the beginning.
To search a track by ZAPPIN mode again,
repeat steps 1 and 2.
12:00
Page position bar
To move to the upper level, touch
To scroll the list, touch v/V.
To jump pages, touch the page position bar.
Touch the desired item.
Playback starts.
In the case of “SensMe™ channels”
or “SensMe™ mood” playback
If you enter the ZAPPIN mode during
“SensMe™ channels” or “SensMe™ mood”
playback, the most melodic or rhythmical
sections* of tracks are played. For details on the
SensMe™ function, see “Enjoying music
according to your mood — SensMe™” on
page 30.
* May not be detected correctly.
Selecting a file type
MPEG-4
If the disc/USB device contains multiple file
types, only the selected file type (audio/video/
image) can be played. The playback priority
order of file type is initially set to audio, video,
then image (e.g., if the disc contains video files
and image files, only video files are played). You
can select the file type to list up, then select the
desired file to play.
36
While playing back short track passages in a disc
or USB device in sequence, you can search for a
track you want to listen to.
This function is convenient, for example, when
searching for a track in shuffle or shuffle repeat
mode.
During playback, touch “List.”
The list of categories or files in the currently
played item appears.
Contents List
Searching a track by listening
to track passages — ZAPPIN™
During playback, touch “List.”
Touch the desired file.
Playback of the selected file starts.
Tips
• You can change the playback time (page 59), but
cannot select the track passage to play back.
• You can deactivate the beep sound between track
passages (page 59).
Touch
, then “Audio,” “Image” or
“Video” to select the file type.
To close the option menu, touch “Close.”
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 37 Monday, June 7, 2010 1:53 PM
Using Gesture Command
You can perform frequently-used operations by
drawing the following command stroke in the
reception/playback display.
Draw
To
Radio reception:
seek forward stations.
(The same as >.)
a horizontal
line
DVD/VCD playback:
(left to right) skip forward a chapter/track.
(The same as >.)
JPEG/MPEG-4/audio
playback:
skip forward a file/track.
(The same as >.)
Handsfree Calling and Audio
Streaming — Bluetooth
Before using the Bluetooth
function
Basic procedure of the Bluetooth
function
1 Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called “pairing.” This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time.
Radio reception:
seek backward stations.
(The same as ..)
a horizontal
line
(right to left) DVD/VCD playback:
skip backward a chapter/track.
(The same as ..)
JPEG/MPEG-4/audio
playback:
skip backward a file/track.
(The same as ..)
Note
If you delete the device registration from this unit,
you need to perform pairing again.
2 Connection
After pairing is made, connect this unit and
the Bluetooth device. Depending on the
device, connection is automatically made
along with the pairing.
Radio reception:
receive stored stations (go
forward).
a vertical line DVD/VCD/MPEG-4
(upwards)
playback:
fast-forward the video.
JPEG/audio playback:
skip forward an album (folder).
(The same as “Album” +.)
3 Handsfree calling/Audio streaming
You can make/receive a handsfree call, or
listen to audio through this unit.
Radio reception:
receive stored stations (go
backward).
a vertical line DVD/VCD/MPEG-4
(downwards) playback:
reverse the video.
JPEG/audio playback:
skip backward an album
(folder).
(The same as “Album” –.)
To view the instructions on Gesture
Command
Touch
when it is shown in the top right
corner of the display.
continue to next page t
37
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 38 Monday, June 7, 2010 1:53 PM
For details on compatibility of your device, visit
the support site.
Installing the external microphone
To capture your voice during handsfree calling,
you need to install the external microphone
(supplied).
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
For details on how to connect the microphone,
see the supplied installation/connections manual.
Pairing
Bluetooth status indication
XNV-770BT
Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*1
To pair this unit to a Bluetooth device, you need
to enter the same passkey*2 on this unit and on
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
see the manual of the Bluetooth device.
Bluetooth signal indicator*
*1 If you delete the device registration from this unit,
you need to perform pairing again.
*2 Passkey may be called “passcode,” “PIN code,”
“PIN number,” “password,” etc., depending on the
Bluetooth device.
XNV-660BT
Tip
You can pair up to 9 devices.
Searching from this unit
Bluetooth signal indicator*
Check that the other Bluetooth device is set to
allow for searching (discoverable) beforehand.
* Lights up when the Bluetooth signal is on.
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
ATT
Calling...
Name
0123456789
Calling...
15
12:00
Bluetooth status indications
Back
ATT
Top
BT Menu
None: No device is connected for
audio streaming purpose.
Flashing: Connection is in progress.
Lit: Connected to a device.
Signal
OFF / ON
Discoverable
Hide / Show
None: No cellular phone is connected
for handsfree calling purpose.
Flashing: Connection is in progress.
Lit: Connected to a cellular phone.
Device List
Device Name
1/2
Search
15
12:00
Signal strength status of connected
cellular phone.
38
Remaining battery status of connected
cellular phone.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 39 Monday, June 7, 2010 1:53 PM
Touch “Search.”
Search of connectable Bluetooth devices
starts.*1*2
After search is complete, the list of detected
devices*3 appears.
*1 If the Bluetooth signal of this unit is off, it
activates automatically when searching starts.
*2 Search time varies depending on the number of
connectable devices.
*3 The name or address (if name is unavailable) of
detected devices are displayed.
Start searching for this unit from the
other Bluetooth device.
After search is complete, this unit appears as
“Sony Automotive”* in the list of the other
Bluetooth device.
* Can be changed in the Bluetooth setting
(page 47).
DR-BT30Q
Sony
Automotive
XXXXXXX
Touch the device to connect.
Select the connection type.
Touch “Handsfree Connect” to use for
handsfree calling.
Touch “Audio Connect” to use for audio
streaming.
Pairing start and the passkey input display
appears.
Touch the number keys to enter the
passkey, then “OK.”
Perform the required operation also on the
other Bluetooth device.
Pairing is complete and this unit is connected
to the other Bluetooth device.
When connection is made successfully, or
appears at the bottom of the display.
Searching from the Bluetooth
device
The procedure to search for this unit from the
other Bluetooth device is explained below.
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
Touch “Signal,” then “Yes” to set
“Signal” to “ON.”
The Bluetooth signal of this unit is activated.
Touch “Discoverable” to set to
“Show.”
The unit is ready to be detected by the other
Bluetooth device.
After you perform the required operation on
the other Bluetooth device, the passkey input
display appears on this unit.
Touch the number keys to enter the
passkey, then “OK.”
Pairing is complete and this unit is connected
to the other Bluetooth device.
When connection is made successfully, or
appears at the bottom of the display.
Notes
• While connecting to a Bluetooth device, this unit
cannot be detected from another device. To enable
detection, disconnect the current connection and
search for this unit from another device.
• Depending on the device, searching from this unit
may not be possible. In this case, search for this unit
from the other device.
• If you search for this unit and the other device
mutually at the same time, this unit will not recognize
the other device.
• It may take time to search or connect.
• Depending on the device, the connection
confirmation display appears before inputting the
passkey.
• The time limit for inputting the passkey differs
depending on the device.
• This unit cannot be connected to a device that
supports only HSP (Head Set Profile).
Connecting
When the ignition is switched to on with the
Bluetooth signal activated, this unit searches for
the last-connected Bluetooth device, and
connection is made automatically if possible.
This chapter explains how to connect manually
to registered Bluetooth devices.
Before starting, be sure to activate the Bluetooth
signal both on this unit (page 47) and the other
Bluetooth device.
continue to next page t
39
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 40 Monday, June 7, 2010 1:53 PM
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
To connect to the last-connected
device from this unit (Bluetooth
Audio only)
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
Note
If connection is made during audio streaming, noise
may occur over playback sound.
Touch “Device List.”
The list of registered Bluetooth devices
appears.
To scroll the list, touch v/V.
Touch the device to connect.
Select the connection type.
Touch “Handsfree Connect” to use for
handsfree calling.
Touch “Audio Connect” to use for audio
streaming.
Connection is complete.
When connection is made successfully, or
appears at the bottom of the display.
In the device list, the currently connected
device is indicated by the icon at the head of
its name.
Touch “Source List,” “BT Audio,” then
“Connect.”
Tip
You can connect a cellular phone for audio streaming
purpose if it supports A2DP (Advanced Audio
Distribution Profile).
Handsfree calling
Once the unit is connected to the cellular phone,
you can make/receive handsfree calls by
operating this unit.
Making calls
By dialing a phone number
To connect from the other Bluetooth
device
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Back
Operate the other Bluetooth device to connect to
this unit.
When connection is made successfully, or
appears at the bottom of the display.
ATT
BT Menu
Navi
Top
Preset Dial
P1
P2
P3
P4
P5
P6
Voice Dial
To disconnect
1 Follow steps 1 to 3 above.
2 Touch the currently connected device, then
“Handsfree Disconnect” or “Audio
Disconnect.”
BT phone
Call Menu
PB Access
15
12:00
Touch “Call Menu,” then “Dial.”
The number input display appears.
To delete all registrations
1 Follow steps 1 to 3 above.
2 Touch “Delete All,” then “Yes” in the
confirmation display.
To delete an individual registration
1 Follow steps 1 to 3 above.
2 Touch the device to delete, then “Delete this
device from List.”
3 Touch “Yes” in the confirmation display.
Back
ATT
Top
Dial
Please input phone number.
15
12:00
40
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 41 Monday, June 7, 2010 1:53 PM
Touch the number keys to enter the
phone number, then
To delete an entered number, touch
The call is made and the calling display
appears until the other party answers.
By the preset dial
You can store up to 6 contacts in the preset dial.
For details on how to store, see “Preset dial” on
page 45.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch the number in the list (“P1” to
“P6”).
The contact confirmation display appears.
Touch “Yes.”
The call is made and the calling display
appears until the other party answers.
ATT
Calling...
Name
0123456789
Calling...
15
12:00
By the voice dial function
By the phonebook
For details on how to manage the phonebook
data, see “Phonebook management” on page 42.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
Select the desired contact.
1 In the initial list, touch the initial of the
contact.
2 In the name list, touch the name of the
contact.
3 In the number list, touch the phone
number.
The contact confirmation display appears.
Touch “Call.”
The call is made and the calling display
appears until the other party answers.
Tip
You can also browse the phonebook of the connected
cellular phone on this unit and make a call (page 44).
By the call history
The unit stores the last 20 calls, allowing you to
select one quickly from the list.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Recent Call.”
The list of call history appears.
To scroll the list, touch v/V.
Touch the desired item in the list.
The contact confirmation display appears.
Touch “Call.”
The call is made and the calling display
appears until the other party answers.
You can make a call using the voice tag stored on
the connected cellular phone.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Voice Dial.”
Say the voice tag stored on the cellular
phone.
Your voice is recognized, then the call is
made.
The calling display appears until the other
party answers.
Notes
• Say the voice tag in the same way as you stored it
on the cellular phone.
• If the voice dial function is activated on the
connected cellular phone, it may not work by this
unit.
• Do not use the voice dial function on the cellular
phone while it is connected to this unit.
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
• Voice dial may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site.
To adjust the talker’s voice volume
Press (VOL) +/– while making a call.
The level of talker’s voice volume will be stored
into memory, independently from the regular
volume level.
41
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 42 Monday, June 7, 2010 1:53 PM
To send DTMF (Dual Tone Multiple
Frequency) tones
Receiving calls
With the unit connected to the cellular phone,
you can receive a call in any status.
The following display indicates an incoming call,
along with the ring tone.
Touch “Open Keypad,” then the required number
keys.
To transfer the current call to the
cellular phone
Touch “Handsfree OFF.”
To transfer back to the handsfree call, touch
“Handsfree ON.”
ATT
Incoming call...
Name
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
0123456789
Incoming call...
15
12:00
To answer the call
Touch
To adjust the volume for the other
party
Touch “BT Menu.”
Touch “Back” repeatedly to return to
the previous displays.
To adjust the ring tone volume
Press (VOL) +/– while receiving a call.
The level of ring tone volume will be stored into
memory, independently from the regular volume
level.
Touch v/V to scroll, then “MIC Gain.”
Touch –/+ to adjust the level.
The level is adjustable in single steps,
between –2 and +2.
To end a call
Touch
To reject a call
Touch
Note
The ring tone and talker’s voice are output only from
front speakers.
Tips
• You can set to answer a call automatically (page 47).
• You can set to use the ring tone of the cellular phone
or this unit (page 47).
Operations during a call
The following display appears during a call.
ATT
BT Menu
Navi
Top
On the Line.
Name
0123456789
Handsfree OFF
Open Keypad
Phonebook management
You can store up to 300 contacts in the
phonebook and up to 5 phone numbers can be
registered to each contact.
Notes
• Prior to disposal or changing ownership of your car
with this unit still installed, be sure to press the reset
button to erase all the phonebook data in this unit to
prevent possible unauthorized access.
Disconnecting the power supply lead will also erase
all the phonebook data.
• Downloaded phonebook data from a cellular phone
cannot be overwritten by subsequent data. However,
some data (name, etc.,) may be duplicated as a
result.
• Phonebook data may be lost if this unit is damaged.
• When disposing of this unit, delete the phonebook
data by initializing (page 47).
10:59
15
12:00
To adjust the talker’s voice volume
42
Press (VOL) +/– during a call.
The level of talker’s voice volume will be stored
into memory, independently from the regular
volume level.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 43 Monday, June 7, 2010 1:53 PM
Storing phonebook data
To download from a cellular phone
Back
If the connected cellular phone supports PBAP
(Phone Book Access Profile), you can download
phonebook data and store on this unit.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “PB Access.”
The phonebook access menu appears.
Touch “Access” to select the memory
where phonebook data is stored.
To download the data in a cellular phone’s
internal memory, set to “Memory.”
To download the data on SIM, set to “SIM.”
Touch “Phonebook Download.”
When downloading is complete, “Complete”
appears and the phonebook data is stored on
this unit.
To receive from a cellular phone
You can send phonebook data from the
connected cellular phone and receive it on this
unit.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Receive
Phonebook.”
This unit is ready for receiving phonebook
data.
Send the phonebook data by
operating the connected cellular
phone.
When receiving is complete, “Complete”
appears and the phonebook data is stored on
this unit.
To add a contact by entering the
name and number
Touch “Add Contact.”
The contact registration display appears.
Top
ATT
Add Contact
Empty
Empty
1/1
Add to Phonebook?
15
12:00
Touch “Empty” on the first line.
The name input display appears.
Touch the character keys to enter the
name, then “OK.”
For details on how to use the keyboard, see
“About the keyboard to edit the name” on
page 45.
The contact registration display reappears.
Touch “Empty.”
The number input display appears.
Touch the number keys to enter the
phone number, then “OK.”
The phone number type selection display
appears.
Touch the desired phone number type.
The contact registration display reappears.
To enter other phone numbers, repeat steps 6
to 8.
Touch “Add to Phonebook?”
The contact is added to the phonebook.
To add a contact from the call history
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Recent Call.”
The list of call history appears.
To scroll the list, touch v/V.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch the item to add to the
phonebook.
The contact confirmation display appears.
Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
Touch “Save to Phonebook.”
The name input display appears.
Touch the character keys to enter the
name, then “OK.”
For details on how to use the keyboard, see
“About the keyboard to edit the name” on
page 45.
The contact is added to the phonebook.
43
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 44 Monday, June 7, 2010 1:53 PM
Browsing a phonebook in a cellular
phone
If the connected cellular phone supports PBAP
(Phone Book Access Profile), you can browse its
phonebook data on this unit.
You can also make a call to a contact or add the
contact to this unit’s phonebook.
To delete an individual contact from
the phonebook
Follow steps 1 to 2 above.
Select the contact to delete.
1 In the initial list, touch the initial of the
contact.
2 In the name list, touch the name of the
contact.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Delete Contact.”
The confirmation display appears.
Touch “PB Access.”
The phonebook access menu appears.
Touch “Yes.”
The contact is deleted from the phonebook.
Touch “Access” to select the memory
where phonebook data is stored.
To browse the data in a cellular phone’s
internal memory, set to “Memory.”
To browse the data on SIM, set to “SIM.”
Editing a contact
Touch “Phonebook Browsing.”
The phonebook of the connected cellular
phone appears.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
Select the desired contact.
Select the contact to edit.
1 In the initial list, touch the initial of the
contact.
1 In the initial list, touch the initial of the
contact.
2 In the name list, touch the name of the
contact.
3 In the number list, touch the phone
number.
The contact confirmation display appears.
To call the contact
2 In the name list, touch the name of the
contact.
Touch the desired edit option.
Touch
“Edit Name”
edit the name of the
contact. Enter the new
name, then touch
“OK.”
“Add Number”
add the phone number
to the contact. Enter the
phone number, then
touch “OK.”
the phone
number in the
list
delete the selected
phone number. Touch
“Delete Number,” then
“Yes.”
Touch the phone number to call, then “Yes” in
the confirmation display.
To add the contact to this unit’s
phonebook
Touch “Save to Phonebook,” then “Yes” in the
confirmation display.
Deleting phonebook data
To
To delete all phonebook data on this
unit
44
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
Touch “Delete All.”
The confirmation display appears.
Touch “Yes.”
All phonebook data is deleted.
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 45 Monday, June 7, 2010 1:53 PM
About the keyboard to edit the name
Back
ATT
Touch “Yes.”
The selected item is deleted from the call
history.
Top
Contact Name
Please Input Name
Preset dial
NAME
abc
123
Space
To store from the phonebook
OK
15
Touch
You can store contacts in the phonebook or call
history into the preset dials.
12:00
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Phonebook.”
The phonebook appears.
Select the contact to store in the
preset dial.
To
“ABC” or “abc”
change the case.
the desired
character key
enter the character.
“123”
switch to the numeric
keyboard.
1 In the initial list, touch the initial of the
contact.
the desired
enter the number/
number/symbol key symbol.
2 In the name list, touch the name of the
contact.
“Space”
3 In the number list, touch the phone
number.
The contact confirmation display appears.
enter a space.
delete a character.
“OK”
complete the name edit.
Call data management
Touch “Preset Memory,” then the
desired preset number (“P1” to “P6”).
The contact is stored in the selected preset
number.
Call history
To store from the call history
You can delete the items in the call history.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Recent Call.”
The list of call history appears.
To scroll the list, touch v/V.
Touch the desired item in the list.
The contact confirmation display appears.
Touch “Preset Memory,” then the
desired preset number (“P1” to “P6”).
The contact is stored in the selected preset
number.
To delete all items in the call history
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “Recent Call.”
The list of call history appears.
Touch “Delete All.”
The confirmation display appears.
Touch “Yes.”
All items in the call history are deleted.
To delete an individual item in the
call history
Follow steps 1 to 2 above.
Touch “Delete Number.”
The confirmation display appears.
To change the registration of the
preset dial
Follow the procedure above and overwrite a
registered preset dial.
In the list, touch the item to delete.
The contact confirmation display appears.
45
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 46 Monday, June 7, 2010 1:53 PM
Locking the personal information
To prevent unauthorized access to personal
information, you can lock call data by setting a 4digit code.
Once locked, you need to enter the code to access
the items in the call menu.
Press (TOP), then touch “BT Phone”
in the top menu.
The Bluetooth Phone display appears.
Touch “Call Menu,” then “PIM
Security.”
The confirmation display appears.
Touch “Yes.”
The code setting display appears.
Touch the number keys to enter your
code, then “OK.”
To confirm, touch the number keys to
reenter your code, then “OK.”
The setting is complete.
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
Unlocking the call data
1 Follow steps 1 to 2 above.
The confirmation display appears.
2 Touch “Yes.”
The unlock display appears.
3 Touch the number keys to enter your code.
“Complete” appears, and the call data is
unlocked.
Operating the Bluetooth device
with this unit
If the other device supports AVRCP (Audio
Video Remote Control Profile) of Bluetooth
technology, you can control the playback on this
unit.
Operations can be performed in the same way as
disc playback (page 21), except for the
following.
Touch
To
“Play Menu” c
“BT Menu”
open the Bluetooth setting
menu (page 46).
–/+ in the
“Level” box
reduce the volume level
differences between this
unit and the other Bluetooth
device. The level is
adjustable in single steps,
between –8 and +18.
“Connect”
connect to the lastconnected device from this
unit.
Notes
• The available operation differs depending on the
Bluetooth device. Perform unavailable operations on
the Bluetooth device.
• Depending on the Bluetooth device, it may be
necessary to touch u twice to start/pause the
playback.
• During audio streaming, some indications such as
track name, etc., may not appear on this unit.
Bluetooth settings
Audio streaming
Listening to a Bluetooth device
through this unit
If the other device supports A2DP (Advanced
Audio Distribution Profile) of Bluetooth
technology, you can listen to the playback sound
through this unit.
Connect this unit and the Bluetooth
device (page 39).
Reduce the volume on this unit.
Operate the other Bluetooth device to
start playback.
Adjust the volume on this unit.
Touch “Source List,” then “BT Audio.”
The Bluetooth Audio display appears.
The Bluetooth settings can be configured in “BT
Menu.”
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
Touch the desired item in the list and
configure the setting.
46
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 47 Monday, June 7, 2010 1:53 PM
The items in the Bluetooth setting menu are as
follows.
Sound Adjustment
“Signal”*1
Activates the Bluetooth signal: “ON,” “OFF.”
Selecting the sound quality
— EQ7
“Discoverable”*1 (page 39)
Allows the other Bluetooth device to search for
this unit: “Show,” “Hide.”
“Device Name”*1
Changes the name of this unit displayed on the
connected device. (Default setting: “Sony
Automotive”)
For details on basic operation of keyboard, see
“About the keyboard to edit the name” on
page 45.
You can select an equalizer curve from 7 music
types (“Xplod,” “Vocal,” “Edge,” “Cruise,”
“Space,” “Gravity,” “Custom” or “OFF”).
During reception/playback, touch
“Source List,” then
Touch “Sound.”
The sound setting menu appears.
“Search”*1 (page 38)
Searches for connectable Bluetooth devices.
Touch “EQ7.”
The options appear.
“Device List”*1 (page 39)
Shows the list of registered devices; connects to
a registered device; deletes all registrations.
Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select “OFF.”
To return to the previous display, touch “Back.”
“Auto Answer”*1
Answers an incoming call automatically.
– “Short”: to answer automatically after 3
seconds.
– “Long”: to answer automatically after 10
seconds.
– “OFF”: to not answer automatically.
“Ringtone”*1*2
Uses the ring tone of this unit or the connected
cellular phone: “Default,” “Cellular.”
“EC/NC Mode” (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise in phone call
conversations.
Set to “Mode 1” normally.
If the outgoing sound quality is unsatisfactory,
set to “Mode 2” or “OFF.”
Customizing the equalizer curve
— EQ7 Tune
“Custom” of EQ7 allows you to make your own
equalizer settings. You can adjust the level of 7
different bands: 62 Hz, 157 Hz, 396 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, and 16 kHz.
During reception/playback, touch
“Source List,” then
Touch “Sound,” then “EQ7.”
Touch “Custom,” then “Tune.”
The tuning display appears.
ATT
Back
Top
EQ7 Tune : Custom
“MIC Gain” (page 42)
Adjust the volume for the other party: –2 ~ +2.
“Initialize”*1
Initializes all Bluetooth-related settings. Touch
“Yes” in the confirmation display.
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit’s ring
tone may be output even if set to “Cellular.”
62 Hz
157 Hz
396 Hz
1 kHz
Reset
2.5 kHz
6.3 kHz
16 kHz
OK
15
12:00
Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch “Reset.”
Touch “OK.”
The setting is complete.
Note
For details on the setting of other Bluetooth devices,
see their respective manuals.
To return to the previous display, touch “Back.”
Tip
Other equalizer types are also adjustable.
47
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 48 Monday, June 7, 2010 1:53 PM
Adjusting the sound
characteristics
The sound balance between left and right
speakers (“Balance”) and front and rear speakers
(“Fader”) can be adjusted to your preference.
You can also adjust the volume level of
subwoofer if it is connected.
During reception/playback, touch
“Source List,” then
Touch “Sound.”
The sound setting menu appears.
Touch “Balance/Fader.”
The setting display appears.
Back
ATT
Top
Balance/Fader/Subwoofer Level Adjust
Fader : 0
Optimizing sound for the
listening position
— Intelligent Time Alignment
The unit can change the localization of sound by
delaying the sound output from each speaker to
suit your position, and simulate a natural sound
field with the feeling of being in the center of it
wherever you sit in the car.
The options for “Listening Position” are
indicated below.
“Front L” (1): Front left
“Front R” (2): Front right
“Front” (3): Center front
“All” (4): In the center of
your car
“Custom”: Precisely
calibrated position (page 49)
“OFF”: No position set
132
Subwoofer : 0
Balance : 0
15
12:00
Touch B/V/v/b to adjust the balance/
fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).
Touch +/– to adjust the volume level of
subwoofer.
This setting is adjustable only when
subwoofer is connected and “Subwoofer” is
set to “ON” (page 56).
The level is adjustable in single steps,
between –6 and +6.
To return to the previous display, touch “Back.”
You can also set the approximate subwoofer
position from your listening position if:
– the subwoofer is connected and “Subwoofer” is
set to “ON” (page 56).
– the listening position is set to “Front L,” “Front
R,” “Front” or “All.”
During reception/playback, touch
“Source List,” then
Touch “Sound.”
The sound setting menu appears.
Touch “Listening Position.”
The setting display appears.
Set the listening position.
Touch “Front L,” “Front R,” “Front,” “All” or
“Custom.”
Set the subwoofer position.
If you select “Front L,” “Front R,” “Front” or
“All” in step 4 above, you can set the
subwoofer position.
Touch “Near,” “Normal” or “Far.”
The setting is complete.
To cancel Intelligent Time Alignment, select
“OFF.”
To return to the previous display, touch “Back.”
48
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 49 Monday, June 7, 2010 1:53 PM
Precisely calibrating the listening
position
— Intelligent Time Alignment Tune
Speaker configuration and
volume setup
You can precisely calibrate your listening
position from each speaker so that the sound
delay reaches the listener more correctly.
Creating a virtual center speaker
— CSO
Before starting, measure the distance between
your listening position and each speaker.
To fully enjoy surround sound, it is adequate to
have 5 speakers (front left/right, rear left/right,
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center
speaker even though a real center speaker is not
connected.
During reception/playback, touch
“Source List,” then
Touch “Sound,” then “Listening
Position.”
Touch “Custom,” then “Custom Tune.”
The setting display appears.
ATT
Back
Top
Position Tune
100
100
100
100
During disc/USB playback, touch
“Source List,” then
Touch “Sound.”
The sound setting menu appears.
Touch “CSO.”
The options appear.
Touch “CSO1,” “CSO2” or “CSO3.”
The setting is complete.
100
To return to the previous display, touch “Back.”
(cm)
Reset
15
OK
12:00
Touch +/– of each speaker to set the
distance between your listening
position and the speakers.
The distance is adjustable in 2 cm (13/16 in)
steps, between 0 and 400 cm (0 and 13 1/10 ft).
To restore the default setting, touch “Reset.”
Touch “OK.”
The setting is complete.
To return to the previous display, touch “Back.”
Note
The setting is applied only after “OK” is touched.
Note
“CSO” is effective only when “Multi Ch Output” is set to
“Multi” (page 58), as it is effective only for playback of
multi-channel sources.
Using rear speakers as subwoofer
— RBE
RBE (Rear Bass Enhancer) enhances the bass
sound by applying the low pass filter setting
(page 56) to rear speakers. This function allows
rear speakers to work as a subwoofer even if it is
not connected.
During reception/playback, touch
“Source List,” then
Touch “Sound.”
The sound setting menu appears.
Touch v/V to scroll, then “RBE.”
The options appear.
Touch “RBE1,” “RBE2” or “RBE3.”
The setting is complete.
To return to the previous display, touch “Back.”
49
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 50 Monday, June 7, 2010 1:53 PM
Adjusting the speaker volume
Monitor Adjustment
You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Right), “Front L” (Front Left), “Surround L”
(Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
Adjusting the monitor angle
(XNV-770BT only)
* Adjustable only when a subwoofer is connected and
“Subwoofer” is set to “ON” (page 56).
While the unit is off, touch “Source
List,” then
Touch “Sound.”
The sound setting menu appears.
Touch v/V to scroll, then “4.1ch
Speaker Level.”
The setting display appears.
Back
ATT
Top
4.1ch Speaker Level
Front L
Front R
Surround L
Surround R
You can adjust the monitor angle for best
viewing.
Touch “Source List,” then
Touch v/V to scroll, then “Monitor
Angle.”
The setting display appears.
Touch –/+ to adjust the angle.
The adjustment is stored.
The monitor retains the angle even after the
front panel is opened and closed.
Touch “General.”
The general setting menu appears.
To return to the previous display, touch “Back.”
Touch panel calibration
Subwoofer
Reset
12:00
Touch the speaker, then +/– to adjust
the level.
Repeat this step to adjust all speaker volume.
To restore the default setting, touch “Reset.”
Touch panel calibration is required if the
touching position does not correspond with the
proper item.
Touch “Source List,” then
Touch v/V to scroll, then “Touch Panel
Adjust.”
The setting display appears.
Touch the targets in sequence.
The calibration is complete.
To return to the previous display, touch “Back.”
Touch “General.”
The general setting menu appears.
To cancel calibration, touch “Cancel.”
50
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 51 Monday, June 7, 2010 1:53 PM
Setting the background screen
Customizing the picture quality
You can select the screen theme, visualizer and
picture brightness for the background screen
according to your preference.
The options “Custom 1” and “Custom 2” of
Picture EQ allow you to make your own picture
quality setting by adjusting the picture tones.
Touch “Source List,” then
During video/image playback, touch
“Source List,” then
Touch “Screen,” then “Picture EQ.”
Touch “Screen Select.”
The options appear.
Select the screen theme.
Touch “Screen Theme,” then the desired type.
Select the visualizer.
Touch “Visualizer,” then the desired type.
Select the picture brightness.
Touch “Day / Night mode,” then one of the
following options.
Touch “Screen.”
The screen setting menu appears.
Touch “Custom 1” or “Custom 2,” then
“Custom Tune.”
The setting display appears.
Back
ATT
Top
Picture EQ : Custom Tune
Warm
“Auto”: Switches the brightness
automatically when you turn the lights on.
(Available only when the illumination control
lead is connected.)
“Always Day”: Fixes the brightness suitable
for day time use.
“Always Night”: Fixes the brightness
suitable for night time use.
To return to the previous display, touch “Back.”
Selecting the picture quality
— Picture EQ
Normal
Cool
Color Tone
Brightness
15
Color
12:00
Touch “Warm,” “Normal,” or “Cool” to
select “Color Tone.”
Touch +/– of “Brightness” and “Color”
to adjust their levels.
To return to the previous display, touch “Back.”
Note
The picture quality of the rear view camera cannot be
adjusted.
You can select a picture quality suitable for the
interior brightness of the car.
The options are indicated below.
“Dynamic”: Vivid picture with bright, clear
colors.
“Standard”: Standard picture quality.
“Theater”: Brightens the monitor; suitable for
darkly-lit movies.
“Sepia”: Applies a sepia tone to the picture.
“Custom 1,” “Custom 2”: User-adjustable
settings (page 51).
During video/image playback, touch
“Source List,” then
Touch “Screen.”
The screen setting menu appears.
Touch “Picture EQ.”
The options appear.
Touch the desired option.
To return to the previous display, touch “Back.”
51
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 52 Monday, June 7, 2010 1:53 PM
Selecting the aspect ratio
You can change the screen aspect ratio.
The options are indicated below.
“Normal”: Picture with 4:3
aspect ratio (regular picture).
“Wide”: Picture with 4:3
aspect ratio enlarged to the left
and right edges of the screen,
with overflowing parts of top
and bottom cut off to fill the
screen.
“Full”: Picture with 16:9
aspect ratio.
Settings
The setting menu includes the following
categories.
•
•
•
•
“General”: General settings (page 53)
“Sound”: Sound settings (page 55)
“Screen”: Screen settings (page 57)
“Visual”: DVD and other playback settings
(page 58)
Basic setting operation
You can set items in the menu by the following
procedure.
E.g., when setting the demonstration
“Zoom”: Picture with 4:3
aspect ratio enlarged to the left
and right edges of the screen.
While the unit is off, touch “Source
List,” then
From the top menu, touch
The setting menu appears.
Back
ATT
Top
During video/image playback, touch
“Source List,” then
Security Control
Touch “Screen.”
The screen setting menu appears.
Auto OFF
No
CT
OFF / ON
Touch “Aspect.”
The options appear.
Clock Adjust
Output Color System
General
1/4
NTSC / PAL
Sound
Screen
15
Touch the desired option.
To return to the previous display, touch “Back.”
Locked
Note
The screen aspect ratio of the rear view camera
cannot be changed.
Visual
12:00
Touch “Screen.”
The screen setting display appears.
Back
ATT
Top
Screen Select
Picture EQ
Dynamic
Aspect
Full
Clock
OFF / ON
OFF / ON
Demo
General
Sound
15
Screen
Visual
12:00
Touch “Demo” to set to “ON” or “OFF.”
The setting is complete.
To scroll the options (only when required), touch
v/V.
To return to the previous display, touch “Back.”
52
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 53 Monday, June 7, 2010 1:53 PM
General settings
Touch
c “General” c the desired item c the desired option. For details on this procedure, see
“Basic setting operation” on page 52.
Follow the page reference for details. “z” indicates the default setting.
Item
Option
Purpose
Unit status
Security Control (page 60)
–
–
Any status.
Clock Adjust (page 60)
–
–
Any status.
No (z)
Auto OFF
Shuts off automatically after a
desired time when the unit is
30sec, 30min,
off.
To deactivate the Auto Off
function.
CT (Clock Time) (page 24, 25) ON
To activate the CT function.
Any status.
To select the desired time.
60min
Any status.
OFF (z)
To deactivate the CT
function.
Output Color System
Changes the color system
according to the connected
monitor.
(SECAM is not supported.)
PAL
To set to PAL.
NTSC (z)
To set to NTSC.
Dimmer
Changes the display
brightness.
Auto (z)
To dim the display
automatically when you
turn lights on. (Available
only when the illumination
control lead is connected.)
ON
Unit off.
Any status.
To dim the display.
(–5 ~ +5)
Dimmer Level
Sets the brightness level when z: 0
the dimmer is activated.
To select the level.
Touch Panel Adjust
(page 50)
–
–
Beep
ON (z)
To activate the operation
sound.
OFF
To deactivate the operation
sound.
English (z),
Español,
Русский
To select the display
language.
ON (z)
To turn on the button
illumination.
OFF
To turn off the button
illumination.
Any status.
Any status.
Any status.
Language
Key Illumination
Unit off.
Any status.
continue to next page t
53
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 54 Monday, June 7, 2010 1:53 PM
Item
Option
Default (z)
Rotary Commander
Changes the operative
direction of rotary commander
Reverse
controls.
Purpose
To use in the factory-set
position.
Any status.
To use on the right side of
the steering column.
AUX1 Input (page 61)
Sets the type of device
connected to the AUX1 IN
terminals to switch the
background screen
accordingly.
Video (z)
To show the picture from
the connected device.
Audio
To show this unit’s
background screen.
OFF
To deactivate the AUX
input.
AUX2 Input* (page 61)
Sets the type of device
connected to the AUX2 IN
terminals to switch the
background screen
accordingly.
Video (z)
To show the picture from
the connected device.
Audio
To show this unit’s
background screen.
OFF
To deactivate the AUX
input.
No Signal
Changes the screen
automatically when no
external video signal is
detected.
Through
To show the no signal
screen.
Blank (z)
To show the audio playback
screen with no signal
notification.
OFF
Camera Input
Activates the video input from
ON (z)
the connected rear view
camera.
To deactivate the input.
Rear View Camera Setting –
(page 62)
–
Monitor Angle
(XNV-770BT only) (page 50)
–
–
Unit status
To show the picture from
the rear view camera when
the back lamp lights up (or
the shift lever is set to the R
(reverse) position).
Unit off.
Unit off.
Unit off.
Any status.
Any status.
Any status.
* When a device is connected to BUS CONTROL IN, “Sony BUS Input” appears instead of “AUX2 Input,” and only
options “Video” and “Audio” are selectable.
54
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 55 Monday, June 7, 2010 1:53 PM
Sound settings
Touch
c “Sound” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 52.
Follow the page reference for details. “z” indicates the default setting.
Item
EQ7 (page 47)
Option
Purpose
Unit status
OFF (z)
To cancel the equalizer
curve.
During reception/
playback.
Xplod, Vocal,
To select the equalizer
Edge, Cruise, curve; customize the
Space, Gravity, equalizer curve.
Custom
Balance/Fader (page 48)
Balance:
(–15 ~ +15)
Fader:
(–15 ~ +15)
z: 0
To adjust the level.
Subwoofer:
(–6 ~ +6)
z: 0
To adjust the volume level
of subwoofer. (Available
only when “Subwoofer” is
set to “ON.”)
Listening Position (page 48) OFF (z)
Sets the listening position and
subwoofer position.
CSO (Center Speaker
Organizer) (page 49)
Sets the virtual center speaker
mode.
During reception/
playback.
To not set the listening
position.
Front L
To set to front left.
Front R
To set to front right.
Front
To set to center front.
All
To set to the center of your
car.
Custom
To precisely calibrate the
listening position
(page 49).
Subwoofer:
Near,
Normal (z),
Far
To select the subwoofer
position. (Available only
when “Subwoofer” is set to
“ON,” and the listening
position is set to “Front L,”
“Front R,” “Front” or
“All.”)
OFF (z),
CSO1, CSO2,
CSO3
To select the mode.
During reception/
playback.
During disc/USB
playback.
continue to next page t
55
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 56 Monday, June 7, 2010 1:53 PM
Item
Option
ON (z)
Subwoofer
Sets the subwoofer connection
status.
Purpose
To set the connection status
to on.
Unit off.
OFF
To set the connection status
to off.
RBE (Rear Bass Enhancer)
(page 49)
Uses rear speakers as a
subwoofer.
OFF (z),
RBE1, RBE2,
RBE3
To select the mode.
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
LPF: 50 Hz,
60 Hz, 80 Hz,
100 Hz (z),
120 Hz
To select the cut-off
frequency. (Available only
when “Subwoofer” is set to
“ON.”)
HPF: OFF (z)
To not cut out the
frequency.
During reception/
playback.
HPF: 50 Hz,
To select the cut-off
60 Hz, 80 Hz,
frequency.
100 Hz, 120 Hz
4.1ch Speaker Level
(page 50)
Unit status
Subwoofer
Phase:
Normal (z),
Reverse
To select the subwoofer
phase. (Available only
when “Subwoofer” is set to
“ON.”)
–
–
During reception/
playback.
Unit off.
56
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 57 Monday, June 7, 2010 1:53 PM
Screen settings
Touch
c “Screen” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 52.
Follow the page reference for details. “z” indicates the default setting.
Item
Option
Purpose
Unit status
Screen Select (page 51)
–
–
Any status.
Picture EQ (page 51)
Dynamic (z),
Standard,
Theater, Sepia
To select the picture
quality.
Custom 1,
Custom 2
To customize the picture
quality.
Full (z),
Normal,
Wide,
Zoom
To select the screen aspect
ratio.
Aspect (page 52)
ON (z)
Clock
Shows/hides the clock display
OFF
in the bottom right corner of
the display.
Demo
During video/
image playback.
During video/
image playback.
To show the clock display.
To hide the clock display.
ON (z)
To activate the
demonstration.
OFF
To deactivate the
demonstration.
Any status.
Unit off.
57
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 58 Monday, June 7, 2010 1:53 PM
DVD and other playback settings
Touch
c “Visual” c the desired item c the desired option. For details on this procedure, see “Basic
setting operation” on page 52.
Follow the page reference for details. “z” indicates the default setting.
Item
Option
Purpose
Unit status
DVD Menu Language
–
To change the disc’s menu
language.
Unit off.
DVD Audio Language
–
To change the soundtrack
language.
Unit off.
DVD Subtitle Language
–
To change the subtitle
language recorded on the
disc.
Unit off.
Audio DRC
Makes the sound clear when
the volume is low. Only for a
DVD* conforming to Audio
DRC (Dynamic Range
Control).
Standard (z)
To select the standard
setting.
Wide
To obtain the feeling of
being at a live performance.
Unit off.
* Excluding DVD-R/DVD-R DL/
DVD-RW in VR mode.
Multi Ch Output
Switches the method of
outputting multi channel
sources.
Multi (z)
To output in 4.1 channels.
Stereo
To downmix to 2 channels.
DVD Parental Control
(page 27)
–
To lock/unlock a disc.
DVD Parental Rating
(page 27)
–
To set the restriction level
according to the selected
area.
Unit off.
To set the restriction
standard by area.
Unit off.
DVD Parental Area (page 27) –
DVD Playlist Play
(For DVD-R/DVD-R DL/
DVD-RW in VR mode only)
Original (z)
To play originally recorded
titles.
Playlist
To play an edited playlist.
DVD Direct Search
(page 28)
Sets the search item of DVD
direct search play.
Chapter (z)
To search for a chapter.
Title
To search for a title.
Unit off.
Unit off.
Unit off.
Any status.
58
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 59 Monday, June 7, 2010 1:53 PM
Item
Option
16:9 (z)
Monitor Type
Selects an aspect ratio suitable
for the connected monitor.
(The screen aspect ratio of this
unit also changes.)
Depending on the disc, “4:3
Letter Box” may be selected
automatically instead of “4:3
Pan Scan,” and vice versa.
4:3 Letter Box
Purpose
Unit status
To display the wide picture.
Suitable when connecting
to a wide-screen monitor or
a monitor with a wide
mode function.
To display a wide picture
with bands on the upper
and lower positions of the
screen.
Suitable when connecting
to a 4:3 screen monitor.
Unit off.
4:3 Pan Scan
To display a wide picture
on the entire screen and
automatically cut off the
portions that do not fit.
ZAPPIN Time (page 36)
6sec, 15sec
(z), 30sec
To select the playback time
for the ZAPPIN function.
ZAPPIN Tone (page 36)
ON (z)
To have the beep sound
between track passages.
OFF
To deactivate the beep
sound.
ON (z)
To store the resume settings
in memory for up to 5
video* discs.
Multi Disc Resume
During audio
playback.
* DVD VIDEO/VCD/MPEG-4
only.
USB Resume
JPEG Slide Show
Video CD PBC (page 25)
During audio
playback.
Unit off.
OFF
To not store the resume
settings in memory.
Resume playback is
available only for the
current disc in the unit.
ON (z)
To store resume settings in
memory for MPEG-4 files
in the USB device.
OFF
To not store the resume
settings in memory.
5sec (z),
20sec, 60sec,
Fixed
To select the slide show
interval.
ON (z)
To play VCD with the PBC
function.
OFF
To play VCD without the
PBC function.
Unit off.
Unit off.
Unit off.
Note
If parental control is applied, resume playback will not work. In this case, playback starts from the beginning of the
disc when it is inserted.
59
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 60 Monday, June 7, 2010 1:53 PM
Setting the security code
This unit has a security function to discourage
theft. Enter a 4-digit number as your security
code.
Once the security function is activated, you need
to enter the security code to turn on the unit after
re-installing the unit in another car or charging
the battery.
Activating the security function
Touch “Source List,” then
The general setting menu appears. If not,
touch “General.”
Touch “Security Control.”
The security code setting display appears.
Touch the number keys to enter your
security code, then “OK.”
To confirm, touch the number keys to
reenter your security code, then “OK.”
The setting is complete.
Setting the clock
The clock uses a 12-hour indication.
Touch “Source List,” then
The general setting menu appears. If not,
touch “General.”
Touch “Clock Adjust.”
The setting display appears.
Touch “AM” or “PM.”
Touch “OK.”
The setting is complete.
Set the hour and minute.
For example, to set to 8:30, touch “0830.”
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
Note
The clock does not synchronize with the time
indication in navigation mode.
To delete an entered number, touch “Clear.”
To return to the previous display, touch “Back.”
The 4-digit input prompt appears when you turn
on the unit after re-installing in another car or
charging the battery. Touch the number keys to
enter your security code.
Deactivating the security function
1 Follow steps 1 to 2 above.
The security unlock display appears.
2 Touch the number keys to enter your security
code.
“Unlocked” appears, and the security function
is deactivated.
60
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 61 Monday, June 7, 2010 1:53 PM
Setting the type of device
Using Optional Equipment
By setting the type (video or audio) of each
connected device, the background screen can be
switched accordingly.
Auxiliary audio/video
equipment
You can connect up to 2 optional devices, such as
portable media player, game, etc., to the AUX1
IN and AUX2 IN terminals on the unit.
Selecting auxiliary device
Touch “Source List,” then “AUX.”
The AUX playback display appears.
Source List
ATT
Navi
While the unit is off, touch “Source
List,” then
The general setting menu appears. If not,
touch “General.”
Touch v/V to scroll, then “AUX1 Input”
or “AUX2 Input.”
Touch “Audio” or “Video.”
The setting is complete.
To deactivate the AUX input, select “OFF.”
To return to the previous display, touch “Back.”
Top
Rear view camera
By connecting the optional rear view camera to
the CAMERA IN terminal, you can display the
picture from the rear view camera.
AUX1
AUX2
Level 0
15
12:00
Touch “AUX1” or “AUX2” to select the
device.
Operate by the portable device itself.
Adjusting the volume level
Be sure to adjust the volume for each connected
device before playback.
The volume level is common to “AUX1” and
“AUX2.”
Reduce the volume on the unit.
Start playback of the portable device
at a moderate volume.
Set your usual listening volume on the
unit.
Touch –/+ in the “Level” box
repeatedly to adjust the level.
The level is adjustable in single steps,
between –8 and +18.
The picture from rear view camera appears when
the back lamp lights up (or the shift lever is set to
the R (reverse) position).
Notes
• When backing up your car, watch the surroundings
carefully for safety. Do not depend on the rear view
camera exclusively.
• The picture from a rear view camera does not
appear in the rear monitor.
Tip
Even if a rear view camera is connected, you can set
to not display the picture from a rear view camera by
deactivating the camera input (page 54).
Touch “Source List,” then “AUX.”
The AUX playback display appears.
61
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 62 Monday, June 7, 2010 1:53 PM
Rear view camera settings
Additional Information
You can display setting items on the picture from
the rear view camera to assist operation.
Precautions
This setting is available only when:
– “Camera Input” is set to “ON” (page 54).
– the parking brake is applied.
• Cool off the unit beforehand if your car has been
parked in direct sunlight.
• Power antenna (aerial) extends automatically.
Moisture condensation
Touch “Source List,” then
The general setting menu appears. If not,
touch “General.”
Touch v/V to scroll, then “Rear View
Camera Setting.”
The setting items appear.
Should moisture condensation occur inside the unit,
remove the disc and wait for about an hour for it to
dry out; otherwise the unit will not operate properly.
To maintain high sound quality
Do not splash liquid onto the unit or discs.
Marker
Back
Mirror
Line Edit
Turn off engine but keep the key in the “IGN” position.
Displaying marker lines
Touch “Marker.”
Touch “Marker” again to hide the marker lines.
Reversing the picture
Touch “Mirror.”
A mirror reversed picture appears.
Editing lines
1 Touch “Line Edit.”
Back
1 Edit
Notes on LCD panel
• Do not press on the LCD panel as doing so can
distort the picture or cause a malfunction (i.e., the
picture may become unclear, or the LCD panel
may be damaged).
• Do not touch other than with the finger, as it may
damage or break the LCD panel.
• Clean the LCD panel with a dry soft cloth. Do not
use solvents such as benzine, thinner,
commercially available cleaners, or antistatic
spray.
• Do not use this unit outside the temperature range
5 – 45 ºC (41 – 113 ºF).
• If your car was parked in a cold or hot place, the
picture may not be clear. However, the monitor is
not damaged, and the picture will become clear
after the temperature in your car becomes normal.
• Some stationary blue, red or green dots may
appear on the monitor. These are called “bright
spots,” and can happen with any LCD. The LCD
panel is precision-manufactured with more than
99.99 % of its segments functional. However, it is
possible that a small percentage (typically 0.01 %)
of the segments may not light up properly. This
will not, however, interfere with your viewing.
2 Edit
3 Edit
Turn off engine but keep the key in the “IGN” position.
Reset
2 Select the line to edit.
Touch “1 Edit,” “2 Edit” or “3 Edit”
corresponding to the line to edit.
3 Edit the line.
To increase the length, touch B b.
To reduce the length, touch bB.
To adjust the position, touch V or v.
To restore the default setting, touch “Reset.”
62
To return to the previous display, touch “Back.”
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 63 Monday, June 7, 2010 1:53 PM
Notes on discs
• Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
• Before playing, wipe the discs
with a cleaning cloth from the
center out. Do not use solvents
such as benzine, thinner,
commercially available
cleaners.
• This unit is designed to play
back discs that conform to the
Compact Disc (CD) standard.
DualDiscs and some of the music discs encoded
with copyright protection technologies do not
conform to the Compact Disc (CD) standard,
therefore, these discs may not be playable by this
unit.
• Discs that this unit CANNOT play
– Discs with labels, stickers, or sticky tape or
paper attached. Doing so may cause a
malfunction, or may ruin the disc.
– Discs with non-standard shapes (e.g., heart,
square, star). Attempting to do so may damage
the unit.
– 8 cm (3 1/4 in) discs.
Note on playback operations of DVDs
and VCDs
Some playback operations of DVDs and VCDs may
be intentionally set by software producers. Since
this unit plays DVDs and VCDs according to the
disc contents the software producers designed, some
playback features may not be available. Also, refer
to the instructions supplied with the DVDs or
VCDs.
Notes on DATA CDs and DATA DVDs
• Some DATA CDs/DATA DVDs (depending on the
equipment used for its recording, or the disc
condition) may not play on this unit.
• Finalization is required for some discs (page 63).
• The unit is compatible with the following
standards.
For DATA CDs
– ISO 9660 level 1/level 2 format, Joliet/Romeo in
the expansion format
– Multi Session
For DATA DVDs
– UDF Bridge format (combined UDF and ISO
9660)
– Multi Border
• The maximum number of:
– folders (albums): 256 (including root and empty
folders).
– files (tracks/images/videos) and folders
contained in a disc: 2,000 (if a folder/file names
contain many characters, this number may
become less than 2,000).
– displayable characters for a folder/file name: 64
(Joliet/Romeo).
Notes on finalizing discs
The following discs are required to be finalized to
play on this unit.
• DVD-R/DVD-R DL (in video mode/VR mode)
• DVD-RW in video mode
• DVD+R/DVD+R DL
• CD-R
• CD-RW
The following discs can be played without
finalization.
• DVD+RW – automatically finalized.
• DVD-RW in VR mode – finalization not required.
For details, see the manual supplied with the disc.
Notes on Multi Session CDs/Multi
Border DVDs
This unit can play Multi Session CDs/Multi Border
DVDs under the following conditions. Note that the
session must be closed and the disc must be
finalized.
• When CD-DA (Compact Disc Digital Audio) is
recorded in the first session:
The unit recognizes the disc as CD-DA and only
CD-DA of the first session is played, even if an
other format (e.g., MP3) is recorded in other
sessions.
• When CD-DA is recorded other than in the first
session:
The unit recognizes the disc as a DATA CD or
DATA DVD, and all CD-DA sessions are skipped.
• When an MP3/WMA/AAC/JPEG/MPEG-4 is
recorded:
Only the sessions containing the selected file type
(audio/video/image)* are played (if CD-DA or
other data exists in other sessions, they are
skipped).
* For details on how to select the file type, see
page 36.
Playback order of MP3/WMA/AAC/
JPEG/MPEG-4 files
MP3/WMA/AAC/
JPEG/MPEG-4
Folder
(album)
MP3/WMA/AAC/
JPEG/MPEG-4
file (track/
image/video)
63
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 64 Monday, June 7, 2010 1:53 PM
About MP3 files
About MPEG-4 files
• MP3, which stands for MPEG-1 Audio Layer-3, is
a music file compression format standard. It
compresses audio CD data to approximately 1/10
of its original size.
• ID3 tag versions 1.0, 1.1, 2.2, 2.3 and 2.4 apply to
MP3 only. ID3 tag is 15/30 characters (1.0 and
1.1), or 63/126 characters (2.2, 2.3 and 2.4).
• When naming an MP3 file, be sure to add the file
extension “.mp3” to the file name.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) MP3 file, elapsed playback
time may not display accurately.
MPEG-4 files meeting the following
requirements can be played. Playback is not be
guaranteed for all MPEG-4 files meeting the
requirements.
Note on MP3
If you play a high-bit-rate MP3, such as 192 kbps,
sound may be intermittent.
About WMA files
• WMA, which stands for Windows Media Audio,
is a music file compression format standard. It
compresses audio CD data to approximately 1/22*
of its original size.
• WMA tag is 63 characters.
• When naming a WMA file, be sure to add the file
extension “.wma” to the file name.
• During playback or fast-forward/reverse of a VBR
(Variable Bit Rate) WMA file, elapsed playback
time may not display accurately.
* only for 64 kbps
Note on WMA
Playback of the following WMA files is not supported.
– lossless compression
– copyright-protected
About AAC files
• AAC tag is 126 characters.
• When naming an AAC file, be sure to add the file
extension “.m4a” to the file name.
• Profile: MPEG-4 Simple profile
• Bit rate: Max. 7 Mbps on USB FS, 10 Mbps on
DVD, 7 Mbps on CD
• Frame rate: Max. 30 fps
• Image size: Max. 720 × 480 pixels
• Audio: Max. 320 kbps (AAC-LC)
• File extension: .mp4
About iPod
• You can connect to the following iPod models.
Update your iPod devices to the latest software
before use.
Made for
– iPod touch (2nd generation)
– iPod touch (1st generation)
– iPod classic
– iPod with video*
– iPod nano (5th generation)
– iPod nano (4th generation)
– iPod nano (3rd generation)
– iPod nano (2nd generation)
– iPod nano (1st generation)*
– iPhone 3GS
– iPhone 3G
– iPhone
* Passenger control is not available for iPod nano
(1st generation) or iPod with video.
• “Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been designed to
connect specifically to iPod or iPhone
respectively, and has been certified by the
developer to meet Apple performance standards.
• Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards.
About JPEG files
• JPEG, which stands for Joint Photographic
Experts Group, is an image file compression
format standard. It compresses still images
approximately 1/10 to 1/100 of original size.
• When naming a JPEG file, be sure to add the file
extension “.jpg” to the file name.
Note on JPEG
Playback of progressive JPEG files is not supported.
64
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 65 Monday, June 7, 2010 1:53 PM
About Bluetooth function
What is Bluetooth technology?
• Bluetooth wireless technology is a short-range
wireless technology that enables wireless data
communication between digital devices, such as a
cellular phone and a headset. Bluetooth wireless
technology operates within a range of about 10 m
(about 33 feet). Connecting two devices is
common, but some devices can be connected to
multiple devices at the same time.
• You do not need to use a cable for connection
since Bluetooth technology is a wireless
technology, neither is it necessary for the devices
to face one another, such is the case with infrared
technology. For example, you can use such a
device in a bag or pocket.
• Bluetooth technology is an international standard
supported by millions of companies all over the
world, and employed by various companies
worldwide.
On Bluetooth communication
• Bluetooth wireless technology operates within a
range of about 10 m.
Maximum communication range may vary
depending on obstacles (person, metal, wall, etc.)
or electromagnetic environment.
• The following conditions may affect the
sensitivity of Bluetooth communication.
– There is an obstacle such as a person, metal, or
wall between this unit and Bluetooth device.
– A device using 2.4 GHz frequency, such as a
wireless LAN device, cordless telephone, or
microwave oven, is in use near this unit.
• Because Bluetooth devices and wireless LAN
(IEEE802.11b/g) use the same frequency,
microwave interference may occur and result in
communication speed deterioration, noise, or
invalid connection if this unit is used near a
wireless LAN device. In such as case, perform the
following.
– Use this unit at least 10 m away from the
wireless LAN device.
– If this unit is used within 10 m of a wireless
LAN device, turn off the wireless LAN device.
– Install this unit and Bluetooth device as near to
each other as possible.
• Microwaves emitting from a Bluetooth device may
affect the operation of electronic medical devices.
Turn off this unit and other Bluetooth devices in
the following locations, as it may cause an
accident.
– where inflammable gas is present, in a hospital,
train, airplane, or petrol station
– near automatic doors or a fire alarm
• This unit supports security capabilities that
comply with the Bluetooth standard to provide a
secure connection when the Bluetooth wireless
technology is used, but security may not be
enough depending on the setting. Be careful when
communicating using Bluetooth wireless
technology.
• We do not take any responsibility for the leakage
of information during Bluetooth communication.
• Connection with all Bluetooth devices cannot be
guaranteed.
– A device featuring Bluetooth function is
required to conform to the Bluetooth standard
specified by Bluetooth SIG, and be
authenticated.
– Even if the connected device conforms to the
above mentioned Bluetooth standard, some
devices may not be connected or work correctly,
depending on the features or specifications of the
device.
– While talking on the phone handsfree, noise may
occur, depending on the device or
communication environment.
• Depending on the device to be connected, it may
require some time to start communication.
Others
• Using the Bluetooth device may not function on
cellular phones, depending on radio wave
conditions and location where the equipment is
being used.
• If you experience discomfort after using the
Bluetooth device, stop using the Bluetooth device
immediately. Should any problem persist, consult
your nearest Sony dealer.
If you have any questions or problems concerning
your unit that are not covered in this manual, consult
your nearest Sony dealer.
65
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 66 Monday, June 7, 2010 1:53 PM
Maintenance
Specifications
Replacing the lithium battery of the
card remote commander
Under normal conditions, the battery will last
approximately 1 year. (The service life may be
shorter, depending on the conditions of use.)
When the battery becomes weak, the range of the
card remote commander becomes shorter. Replace
the battery with a new CR2025 lithium battery. Use
of any other battery may present a risk of fire or
explosion.
FOR UNITED STATES CUSTOMERS. NOT
APPLICABLE IN CANADA, INCLUDING
IN THE PROVINCE OF QUEBEC.
POUR LES CONSOMMATEURS AUX
ÉTATS-UNIS. NON APPLICABLE AU
CANADA, Y COMPRIS LA PROVINCE DE
QUÉBEC.
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
+ side up
Notes on the lithium battery
• Keep the lithium battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
• Wipe the battery with a dry cloth to assure a good
contact.
• Be sure to observe the correct polarity when
installing the battery.
• Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of
in fire.
Fuse replacement
When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.
Monitor section
Display type: Wide LCD color monitor
Dimensions:
XNV-770BT: 7.0 in
XNV-660BT: 6.1 in
System: TFT active matrix
Number of pixels: 1,152,000 pixels
Color system:
PAL/NTSC/SECAM/PAL-M automatic select
Tuner section
FM
Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz
AM
Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:
External antenna (aerial) connector
Intermediate frequency: 25 kHz
Sensitivity: 26 µV
Fuse (10A)
DVD/CD Player section
Signal-to-noise ratio: 120 dB
Frequency response: 10 – 20,000 Hz
Wow and flutter: Below measurable limit
Harmonic distortion: 0.01 %
Region code: Labeled on the bottom of the unit
USB Player section
Interface: USB (Full-speed)
Maximum current: 500 mA
66
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 67 Monday, June 7, 2010 1:53 PM
Wireless Communication
Communication System:
Bluetooth Standard version 2.0 + EDR
Output:
Bluetooth Standard Power Class 2 (Max. +4 dBm)
Maximum communication range:
Line of sight approx. 10 m (33 ft)*1
Frequency band:
2.4 GHz band (2.4000 – 2.4835 GHz)
Modulation method: FHSS
Compatible Bluetooth Profiles*2:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile) 1.3
HFP (Handsfree Profile) 1.5
PBAP (Phone Book Access Profile)
OPP (Object Push Profile)
*1 The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance,
operating system, software application, etc.
*2 Bluetooth standard profiles indicate the purpose of
Bluetooth communication between devices.
Power amplifier section
Outputs: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W u 4 (at 4 ohms)
General
Outputs:
Video output terminal (rear)
Audio output terminals (front/rear)
Subwoofer output terminal
Power antenna (aerial) relay control terminal
Power amplifier control terminal
Inputs:
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
Remote controller input terminal
Antenna (aerial) input terminal
Parking break control terminal
Microphone input terminal
Reverse input terminal
Camera input terminal
AUX audio input terminals
AUX video input terminals
USB signal input connector
External input terminal
Power requirements: 12 V DC car battery
(negative ground (earth))
Dimensions:
XNV-770BT:
Approx. 178 u 100 u 189 mm
(7 1/8 u 4 u 7 1/2 in) (w/h/d)
XNV-660BT:
Approx. 178 u 100 u 173 mm
(7 1/8 u 4 u 6 7/8 in) (w/h/d)
Mounting dimensions: Approx. 182 u 111 u 164 mm
(7 1/4 u 4 3/8 u 6 1/2 in) (w/h/d)
Mass:
XNV-770BT:
Approx. 2.7 kg (5 lb 14 oz)
XNV-660BT:
Approx. 2.4 kg (5 lb 4 oz)
Supplied accessories:
Card remote commander: RM-X170
Parts for installation and connections (1 set)
Microphone
USB connection cable for iPod: RC-200IPV
(XNV-770BT only)
CD-ROM (Application disc)
Parts for enabling navigation function (1 set)
Optional accessories/equipment:
Mobile monitor: XVM-B62
BUS cable (supplied with an RCA pin cord):
RC-61 (1 m), RC-62 (2 m)
USB connection cable for iPod: RC-200IPV
HD Radio™ tuner: XT-100HD
Rear View Camera: XA-R800C
Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
information.
US and foreign patents licensed from Dolby
Laboratories.
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
Design and specifications are subject to change
without notice.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Halogenated flame retardants are not used in
cabinets.
• Packaging cushions are made from paper.
Region code
The region system is used to protect software
copyrights.
The region code is located on the bottom of the unit,
and only DVDs labeled with an identical region code
can be played on this unit.
DVDs labeled ALL can also be played.
If you try to play any other DVD, the message
“Playback prohibited by region code.” will appear on
the monitor screen. Depending on the DVD, no region
code may be labeled even though playing the DVD is
prohibited by area restrictions.
continue to next page t
67
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 68 Monday, June 7, 2010 1:53 PM
System requirements for the software
in the supplied CD-ROM
Computer
• CPU/RAM
– IBM PC/AT compatible machine
– CPU: Intel Pentium III Processor 450 MHz or
higher
– RAM: 256 MB or more (For Windows XP), 512
MB or more (For Windows Vista or later)
• CD-ROM drive
• USB port
OS
Windows XP, Windows Vista, Windows 7
For details on compatible editions or Service Pack, visit
the following support site:
http://esupport.sony.com
http://www.sony.com/mobileAV
Monitor
High color (16-bit) or more, 800 u 600 dots or more
Other
Internet connection
Notes
• The following system environments are not
supported.
– Non IBM PC type computers, such as Macintosh,
etc.
– Homemade computers
– OS upgraded computers
– Multi-display environment
– Multi-boot environment
– Virtual machine environment
• Depending on the computer condition, operation
may not be possible even with the recommended
environment.
Troubleshooting
The following checklist will help you remedy
problems you may encounter with your unit.
Before going through the checklist below, check the
connection and operating procedures.
For problems with the navigation function, refer to
the leaflet (supplied by TomTom) for the navigation
module.
If the problem is not solved, visit the following
support site.
Support site
http://esupport.sony.com
http://www.sony.com/mobileAV
General
No power is being supplied to the unit.
• Check the connection or fuse.
• If the unit is turned off and the display disappears, it
cannot be operated with the remote commander.
t Turn on the unit.
The power antenna (aerial) does not extend.
The power antenna (aerial) does not have a relay box.
No beep sound.
• The beep sound is canceled (page 53).
• An optional power amplifier is connected and you are
not using the built-in amplifier.
The contents of the memory have been erased.
• The reset button has been pressed.
t Store again into the memory.
• The power supply lead or battery has been
disconnected or it is not connected properly.
Stored stations and correct time are erased.
The fuse has blown.
Makes noise when the position of the ignition
is switched.
The leads are not matched correctly with the car’s
accessory power connector.
The display disappears from/does not appear
on the monitor.
• The dimmer is set to “ON” (page 53).
• The display disappears if you press and hold
(SOURCE/OFF).
t Press (SOURCE/OFF) on the unit until the
display appears.
• “M.OFF” is touched and the Monitor Off function
is activated (page 13).
t Touch anywhere on the display to turn back on.
The display does not respond to your touch
correctly.
• Touch one part of the display at a time. If two or more
parts are touched simultaneously, the display will not
operate correctly.
• Adjust the touch point of the display (page 50).
The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates
after turning off the unit.
t Turn off the unit.
Card remote commander operation is not
possible.
If the Monitor Off function is activated (no lighting),
card remote commander operation is not possible
(page 13).
The menu items cannot be selected.
Unavailable menu items are shown in grey.
AUX cannot be selected as the source.
All AUX input settings are set to “OFF.”
t Set “AUX1 Input”/“AUX2 Input” to “Video” or
“Audio” (page 61).
68
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 69 Monday, June 7, 2010 1:53 PM
Radio reception
The stations cannot be received.
The sound is hampered by noises.
• The connection is not correct.
t Connect a power antenna (aerial) control lead
(blue) or accessory power supply lead (red) to the
power supply lead of a car’s antenna (aerial)
booster (only when your car has built-in FM/AM
antenna (aerial) in the rear/side glass).
t Check the connection of the car antenna (aerial).
t If the auto antenna (aerial) will not go up, check
the connection of the power antenna (aerial)
control lead.
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t Tuning stops too frequently:
Set “Local” to “ON” (page 19).
t Tuning does not stop at a station:
Set “Mono” to “ON” (page 19).
• The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “Stereo” indication
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Set “Mono” to “ON” (page 19).
An FM program broadcast in stereo is heard in
monaural.
The unit is in monaural reception mode.
t Set “Mono” to “OFF” (page 19).
RDS
PTY displays “None.”
• The current station is not an RDS station.
• RDS data has not been received.
• The station does not specify the program type.
Picture
There is no picture/picture noise occurs.
• A connection has not been made correctly.
• Check the connection to the connected equipment,
and set the input selector of the equipment to the
source corresponding to this unit.
• Defective or dirty disc.
• Installation is not correct.
t Install the unit at an angle of less than 45° in a
sturdy part of the car.
• The parking cord (light green) is not connected to the
parking brake switch cord, or the parking brake is not
applied.
Picture does not fit in the screen.
The aspect ratio is fixed on the DVD.
There is no picture/picture noise occurs in the
rear monitor.
• The source/mode which is not connected is selected.
If there is no input, no picture appears in the rear
monitor.
• The color system setting is incorrect.
t Set the color system to “PAL” or “NTSC”
according to the connected monitor (page 53).
• The picture of the rear view camera is displayed on
this unit.
t No picture appears in the rear monitor if the
picture of the rear view camera is displayed on
this unit.
Sound
There is no sound/sound skips/sound cracks.
• A connection has not been made correctly.
• Check the connection to the connected equipment,
and set the input selector of the equipment to the
source corresponding to this unit.
• Defective or dirty disc.
• Installation is not correct.
t Install the unit at an angle of less than 45° in a
sturdy part of the car.
• The MP3 file sampling rate is not 32, 44.1 or 48 kHz.
• The WMA file sampling rate is not 32, 44.1 or
48 kHz.
• The AAC file sampling rate is not 44.1 or 48 kHz.
• The MP3 file bit rate is not 48 to 192 kbps.
• The WMA file bit rate is not 64 to 192 kbps.
• The AAC file bit rate is not 40 to 320 kbps.
• The unit is in pause/reverse/fast-forward mode.
• The settings for the outputs are not made correctly.
• The DVD output level is too low (page 26).
• The volume is too low.
• The ATT function is activated, or the Telephone ATT
function (when the interface cable of a car telephone
is connected to the ATT lead) is activated.
• The position of the fader control “Fader” is not set for
a 2-speaker system.
• Unsupported format (such as DTS).
t Check if the format is supported by this unit
(page 10).
Sound is noisy.
Keep cords and cables away from each other.
continue to next page t
69
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 70 Monday, June 7, 2010 1:53 PM
Disc operation
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside down or in
the wrong way.
The disc does not play back.
• Defective or dirty disc.
• The disc is not applicable.
• The DVD is not applicable due to the region code.
• The disc is not finalized (page 63).
• The disc format and file version are incompatible
with this unit (page 10, 63).
• Press Z to remove the disc.
MP3/WMA/AAC/JPEG/MPEG-4 files do not play
back.
• Recording was not performed according to the ISO
9660 level 1 or level 2, the Joliet or Romeo in the
expansion format (DATA CD), or the UDF Bridge
format (DATA DVD) (page 63).
• The file extension is incorrect (page 64).
• Files are not stored in MP3/WMA/AAC/JPEG/
MPEG-4 format.
• If the disc contains multiple file types, only the
selected file type (audio/video/image) can be played.
t Select the appropriate file type using the list
(page 36).
MP3/WMA/AAC/JPEG/MPEG-4 files take longer
to play back than others.
The following discs take a longer time to start
playback.
– a disc recorded with a complicated tree structure.
– a disc recorded in Multi Session/Multi Border.
– a disc to which data can be added.
The disc does not start playing from the
beginning.
Resume playback or multi-disc resume playback
(page 59) has taken effect.
Certain functions cannot be performed.
Depending on the disc, you may not be able to perform
operations such as stop, search, or repeat/shuffle play.
For details, see the manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
• Use the DVD menu instead of the direct selection
button on the card remote commander (page 20).
• Multilingual tracks, multilingual subtitles, or multiangles are not recorded on the DVD.
• The DVD prohibits changing.
The operation buttons do not function.
The disc will not eject.
Press the reset button (page 16).
You forgot the password for parental control.
Enter “5776” in the password input display to unlock
(page 27).
USB playback
Cannot play back items via a USB hub.
This unit cannot recognize USB devices via a USB
hub.
Cannot play back items.
Reconnect the USB device.
The USB device takes longer to play back.
The USB device contains large-sized files or files with
a complicated tree structure.
A beep sounds.
During playback, the USB device has been
disconnected.
t Before disconnecting a USB device, make sure to
stop playback first for data protection.
The sound is intermittent.
The sound may be intermittent at a high-bit-rate of
more than 320 kbps.
Bluetooth function
The other Bluetooth device cannot detect this
unit.
• Set “Signal” to “ON” (page 47).
• Set “Discoverable” to “Show” (page 47).
• While connecting to the other Bluetooth device, this
unit cannot be detected from another device.
Disconnect the current connection and search for this
unit from another device. The disconnected device
can be reconnected by selecting from the list of
registered devices.
This unit cannot detect the other Bluetooth
device.
Check the Bluetooth setting of the other device.
Connection is not possible.
• Depending on the other device, searching from this
unit may not be possible.
t Search for this unit from the other device.
• Depending on the status of the other device,
searching from this unit may not be possible.
t Search for this unit from the other device.
• Check the pairing and connection procedures in the
manual of the other device, etc., and perform the
operation again.
The name of the detected device does not
appear.
Depending on the status of the other device, it may not
be possible to obtain the name.
No ring tone.
• Raise the volume while receiving a call.
• Depending on the connecting device, the ring tone
may not be sent properly.
t Set “Ringtone” to “Default” (page 47).
The talker’s voice volume is low.
Raise the volume during a call.
The other party says that the volume is too low
or high.
Adjust the “MIC Gain” level (page 42).
70
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 71 Monday, June 7, 2010 1:53 PM
Echo or noise occurs in phone call
conversations.
• Reduce the volume.
• “EC/NC Mode” is set to “OFF.”
t Set “EC/NC Mode” to “Mode 1” or “Mode 2”
(page 47).
• If ambient noise other than the phone call sound is
loud, try reducing this noise.
E.g.: If a window is open and road noise, etc., is loud,
shut the window. If the air conditioner is loud, lower
the air conditioner.
The phone sound quality is poor.
Phone sound quality depends on reception conditions
of cellular phone.
t Move your car to a place where you can enhance
the cellular phone’s signal if the reception is poor.
The volume of the connected Bluetooth device
is low or high.
Volume level will differ depending on the Bluetooth
device.
t Reduce the volume level differences between this
unit and the Bluetooth device (page 46).
No sound is output during audio streaming.
The connected Bluetooth device is paused.
t Cancel pause of the Bluetooth device.
The sound skips during audio streaming.
• Reduce the distance between the unit and the
Bluetooth device.
• If the Bluetooth device is stored in a case which
interrupts the signal, remove the case while using.
• Several Bluetooth devices or other devices which
emit radio waves are used nearby.
t Turn off the other devices.
t Increase the distance from the other devices.
• The playback sound stops momentarily when this
unit is connecting to a cellular phone. This is not a
malfunction.
You cannot control the connected Bluetooth
device during audio streaming.
Check that the connected Bluetooth device supports
AVRCP.
Some functions do not work.
Check that the connecting device supports the
functions in question.
The name of the other party does not appear
when a call is received.
• The other party is not stored in the phonebook.
t Store in the phonebook (page 42).
• The calling phone is not set to send the phone
number.
A call is answered unintentionally.
• The connecting phone is set to start a call
automatically.
• “Auto Answer” of this unit is set to “Short” or
“Long” (page 47).
Pairing failed due to time out.
Depending on the connecting device, the time limit for
pairing may be short. Try completing the pairing
within the time by setting a single digit passkey.
Bluetooth function cannot be operated.
Turn off the unit by pressing (SOURCE/OFF) for 1
second, then turn on the unit.
No sound is output from the car speakers
during handsfree call.
If the sound is output from the cellular phone, set the
cellular phone to output the sound from the car
speakers.
Error displays/messages
Bluetooth device is not found.
The unit cannot detect a connectable Bluetooth device.
t Check the Bluetooth setting of the connecting
device.
Busy now… Please try again.
The unit is busy.
t Wait for a moment and try again.
Cannot read.
• The unit cannot read the data due to some problem.
• The data is damaged or corrupted.
Cannot read disc. Disc may be corrupted.
• The disc is corrupted.
• The disc is incompatible with this unit.
• The disc is not finalized.
Disc Error
• The disc is dirty or inserted upside down.
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
• The disc is not compatible with this unit.
t Insert a compatible disc.
• Press Z to remove the disc.
Disc Reading...
The unit is reading all file/album (folder) information
on the disc.
t Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it
may take more than a minute.
Error
• USB device was not automatically recognized.
t Reconnect it again.
• Phonebook content is changed during cellular phone
access.
t Access the phonebook again.
• Phonebook access is disconnected by the cellular
phone.
t Access the phonebook again.
• Phonebook download of the cellular phone failed due
to a problem.
t Download the phonebook again (page 43).
• Phonebook browsing of the cellular phone failed due
to a problem.
t Retry browsing (page 44).
• Phonebook listing of the cellular phone failed due to
a problem.
t Retry listing (page 44).
continue to next page t
71
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Left
00US+00COV-U.book Page 72 Monday, June 7, 2010 1:53 PM
Error - Please select ‘initialize’ from the
Bluetooth settings menu.
A memory error has occurred.
t Initialize the Bluetooth setting (page 47).
FAILURE (Illuminates for about 1 second.)
When the SAT tuner is connected, storing an SAT
radio channel into a preset failed.
t Be sure to receive the channel that you want to
store, then try it again.
Handsfree device is not available.
A cellular phone is not connected.
t Connect a cellular phone (page 39).
Hubs not supported.
USB hub is not supported on this unit.
Local Seek +/Local Seek –
The local seek mode is on during automatic tuning.
No device found.
No device is in the list of registered Bluetooth device.
t Perform pairing with a Bluetooth device (page 38).
No playable data.
The disc does not contain playable data.
No SensMe™ data on device.
The connected USB device does not contain data for
the SensMe™ function, or the data has been moved to
an improper location in the USB device.
Offset
There may be an internal malfunction.
t Check the connection. If the error indication
remains on in the display, consult your nearest
Sony dealer.
Output connection failure.
(Illuminates until any button is pressed.)
The connection of speakers/amplifiers is incorrect.
t See the supplied installation/connections manual to
check the connection.
Overcurrent Caution on USB
The USB device is overloaded.
t Disconnect the USB device, then change the source
by pressing (SOURCE/OFF).
t Indicates that the USB device is out of order, or an
unsupported device is connected.
Playback prohibited by region code.
The DVD playback is prohibited due to the different
region code.
Please push reset.
This unit or USB device cannot be operated due to a
problem.
t Press the reset button (page 16).
Please reset Navi.
Operation is not possible due to an error of the
navigation module.
t Reset the navigation module.
SensMe™ data Reading...
The unit is reading all data for the SensMe™ function
in the connected USB device.
t Wait until reading is complete. Depending on the
amount of data, etc., it may take time.
The connected USB device is not supported.
For details on the compatibility of your USB device,
visit the support site.
The SensMe™ data is corrupted.
The data for the SensMe™ function has a problem,
such as altered file name, information, etc.
USB device is not connected.
USB is selected as source without a USB device
connected. A USB device or a USB cable has been
disconnected during playback.
t Be sure to connect a USB device and USB cable.
USB Reading...
The unit is reading all file/album (folder) information
in the connected USB device.
t Wait until reading is complete and playback starts
automatically. Depending on the structure, it may
take time.
Waiting for Navi connection.
The navigation module is not connected.
t Connect the navigation module to the car dock and
wait for a moment.
“
” or “
”
During reverse or fast-forward, you have reached the
beginning or the end of the disc and you cannot go any
further.
“ ”
The character cannot be displayed with the unit.
If these solutions do not help improve the situation,
consult your nearest Sony dealer.
If you take the unit to be repaired because of disc
playback trouble, bring the disc that was used at the
time the problem began.
72
XNV-770BT/660BT
4-197-968-11 (1)
E:\DATA\4197968111\4197968111XNV770BTU\01US02CD-U.fm
masterpage:Right
00US+00COV-U.book Page 73 Monday, June 7, 2010 1:53 PM
Language code/area code list
Language code list
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code
Language
Code
Language
Code
Language
Code
Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;
Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
1503
1505
1506
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan)Oromo
Oriya
Punjabi
Polish
Pashto;
Pushto
Portuguese
Quechua
RhaetoRomance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
SerboCroatian
Singhalese
Slovak
Slovenian
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1345
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian;
Lettish
Malagasy
1703
Not specified
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
Area code list
Code
Area
Code
Area
Code
Area
Code
Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
2165
2174
2109
2248
2238
2254
2276
2304
2363
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
2362
2376
2390
2379
2427
2424
2436
2489
2501
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
2149
2499
2086
2528
2184
Spain
Sweden
Switzerland
Thailand
United
Kingdom
73
XNV-770BT/660BT
4-197-968-11 (1)
01US+00COV-UIX.fm
masterpage:Left
00US+00COV-U.book Page 74 Monday, June 7, 2010 1:53 PM
Index
AAC 10, 64
Angle (Angle) 22
Area code 73
Audio channel (Stereo) 26
Audio DRC (Audio DRC) 58
Audio format (Audio) 26
Audio streaming 46
Auto Off (Auto OFF) 53
Automatic answer
(Auto Answer) 47
Auxiliary equipment 61
Auxiliary level (Level) 61
Auxiliary settings (AUX1
Input, AUX2 Input) 54, 61
Demonstration (Demo) 57
Dimmer level
(Dimmer Level) 53
Dimmer setting (Dimmer) 53
Discs 10
Display language
(Language) 16, 53
Dolby D level
(Dolby D Level) 26
Dolby Digital 26
DVD audio language (Audio,
DVD Audio Language) 26, 58
DVD control menu
(DVD Control) 22
DVD direct search play
(DVD Direct Search) 28, 58
DVD menu 20
DVD menu language
(DVD Menu Language) 58
DVD playlist play
(DVD Playlist Play) 58
DVD’s top menu
(Top Menu) 20, 22
Dynamic Range Control
(DRC) 58
IF 19
Image rotate (Image Turn) 22
Initial settings
(Initial Setting) 16
Intelligent Time Alignment
48, 49
iPod 34, 64
Background screen
(Screen Select) 51
Balance
(Balance/Fader) 48, 55
Best Tuning Memory
(BTM) 24
Bluetooth 37
Bluetooth setting initialization
(Initialize) 47
Bluetooth settings 46
Bluetooth signal
(Signal) 39, 47
Button illumination
(Key Illumination) 53
Card remote commander
14, 16, 66
Center Speaker Organizer
(CSO) 49, 55
Clock display (Clock) 13, 57
Clock setting
(Clock Adjust) 60
Clock Time (CT) 24, 25, 53
Crossover filter
(Crossover Filter) 56
Echo Canceller/Noise
Canceller Mode
(EC/NC Mode) 47
EQ7 47, 55
Fader (Balance/Fader) 48, 55
Formats 10
Fuse 66
General settings (General) 53
Gesture Command 37
Handsfree calling 40
High Pass Filter (HPF) 56
JPEG 10, 64
Language code 73
List up (List) 36
Listening position
(Listening Position) 48, 55
Local seek mode (Local) 19
Low Pass Filter (LPF) 56
Microphone gain
(MIC Gain) 42, 47
Monaural mode (Mono) 19
Monitor angle
(Monitor Angle) 50
Monitor type
(Monitor Type) 59
MP3 10, 64
MPEG-4 10, 64
Multi Border DVD 63
Multi channel output
(Multi Ch Output) 58
Multi Session CD 63
Multi-disc resume playback
(Multi Disc Resume) 59
No signal (No Signal) 54
NTSC 53
Operation sound (Beep) 53
Output color system
(Output Color System) 53
74
XNV-770BT/660BT
4-197-968-11 (1)
01US+00COV-UIX.fm
masterpage:Right
00US+00COV-U.book Page 75 Monday, June 7, 2010 1:53 PM
PAL 53
Parental control settings
(DVD Parental Control) 27, 58
Passenger control
(Passenger Control) 35
Picture EQ 51, 57
Play menu (Play Menu) 22
Playable discs 10
Playback control
(Video CD PBC) 25, 59
Playback settings (Visual) 58
Program Types (PTY) 24, 25
Screen aspect ratio
(Aspect) 52, 57
Screen settings (Screen) 57
Security function
(Security Control) 60
SensMe™ 30
Shuffle play
(Shuffle) 27, 29, 35
Slide show interval
(JPEG Slide Show) 59
Slow-motion play 22
Sound settings (Sound) 55
Speaker volume
(4.1ch Speaker Level) 50
Subtitle language
(Subtitle, DVD Subtitle
Language) 22, 58
Subwoofer position 48
Subwoofer setting
(Subwoofer) 16, 56
Subwoofer volume
(Balance/Fader) 48, 55
Radio Data System (RDS) 24
Rear Bass Enhancer
(RBE) 49, 56
Rear view camera 61
Rear view camera input
(Camera Input) 54
Rear view camera settings
(Rear View Camera Setting)
62
Receive menu
(Receive Menu) 19
Repeat play
(Repeat) 27, 29, 35
Reset 16
Resume play 22
Ring tone (Ringtone) 47
Rotary commander
(Rotary Commander) 54
Touch panel calibration
(Touch Panel Adjust) 50
USB device 29
USB resume playback
(USB Resume) 59
Volume 11, 12
WMA 10, 64
ZAPPIN beep sound
(ZAPPIN Tone) 59
ZAPPIN playback time
(ZAPPIN Time) 59
ZAPPIN™ 36
75
XNV-770BT/660BT
4-197-968-11 (1)
04US+03BCO-U.fm
masterpage:Left
00US+00COV-U.book Page 76 Monday, June 7, 2010 1:53 PM
If you have any questions/problems
regarding this product, try the following:
Read Troubleshooting in these
Operating Instructions.
Reset the unit.
Note: Stored data may be erased.
Please contact (U.S.A. only);
Call 1-800-222-7669
URL http://www.SONY.com
http://www.sony.net/
Sony Corporation Printed in Thailand
XNV-770BT/660BT
4-197-968-11 (1)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2010:08:06 14:59:10+09:00
Modify Date                     : 2010:08:06 14:59:10+09:00
Page Count                      : 76
Creation Date                   : 2010:08:06 05:59:10Z
Mod Date                        : 2010:08:06 05:59:10Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : 21598
Metadata Date                   : 2010:08:06 05:59:10Z
Creator                         : 21598
Title                           : XNV-770BT_660BT_U_Manual_US.pdf

EXIF Metadata provided by EXIF.tools