Sony Group XSPN1BT Smartphone Cradle Receiver User Manual

Sony Corporation Smartphone Cradle Receiver 05

a href="https://usermanual.wiki/Sony-Group" itemprop="url"> Sony Group >

(Short-Term Confidential) User Manual

M:\003\Win 7 ML\4533738111_XSP-N1BT_GB-CaFR-LaES(10.0 600dpi)\4533738111_XSP-N1BT_GB-CaFR-LaES\01GB-XSPN1BTUC\010COV.fmmasterpage: CoverXSP-N1BT4-533-738-11(1)XSP-N1BT4-533-738-11(1)Smartphone Cradle ReceiverOwner’s RecordThe model and serial numbers are located on the bottom of the unit.Record the serial number in the space provided below.Refer to these numbers whenever you call upon your Sony dealer regarding this product.Model No. XSP-N1BTSerial No.                                       Operating Instructions GBMode d’emploi FRManual de instrucciones ESTo cancel the demonstration (DEMO) display, see page 17.Pour annuler l’affichage de démonstration (DEMO), reportez-vous à la page 20.Para cancelar la pantalla de demostración (DEMO), consulte la página 20.ML.book  Page 1  Tuesday, January 14, 2014  1:28 PM
2GBM:\003\Win 7 ML\4533738111_XSP-N1BT_GB-CaFR-LaES(10.0 600dpi)\4533738111_XSP-N1BT_GB-CaFR-LaES\01GB-XSPN1BTUC\020INT.fmmasterpage: LeftXSP-N1BT4-533-738-11(1)WarningThis device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.CAUTIONThe use of optical instruments with this product will increase eye hazard.For the State of California, USA onlyPerchlorate Material – special handling may apply, Seewww.dtsc.ca.gov/hazardouswaste/perchlorateNote on the lithium batteryDo not expose the battery to excessive heat such as direct sunlight, fire or the like.Be sure to install this unit in the dashboard of the car for safety.For installation and connections, see the supplied installation/connections manual.About this manualThese Operating Instructions describe the controls on the remote. You can also use the controls on the main unit if it has the same or similar names as those on the remote.FOR THE CUSTOMERS IN THE USA. NOT APPLICABLE IN CANADA, INCLUDING IN THE PROVINCE OF QUEBEC.POUR LES CLIENTS AUX ÉTATS-UNIS. NON APPLICABLE AU CANADA, Y COMPRIS LA PROVINCE DE QUÉBEC.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:!Reorient or relocate the receiving antenna.!Increase the separation between the equipment and receiver.!Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.!Consult the dealer or an experienced radio/TV technician for help.You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.Warning if your car’s ignition has no ACC positionBe sure to set the AUTO OFF function (page 18). The unit will shut off completely and automatically in the set time after the unit is turned off, which prevents battery drain. If you do not set the AUTO OFF function, press and hold OFF until the display disappears each time you turn the ignition off.ML.book  Page 2  Tuesday, January 14, 2014  1:28 PM
Download:
Mirror Download [FCC.gov]
Document ID2177212
Application IDbvfuH7V/jEurZgQV0s5tzQ==
Document Description(Short-Term Confidential) User Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize252.96kB (3162044 bits)
Date Submitted2014-01-26 00:00:00
Date Available2014-03-17 00:00:00
Creation Date2014-01-27 09:19:23
Producing SoftwareGPL Ghostscript 9.07
Document Lastmod2014-01-27 09:19:23
Document Title05 User Manual.pdf
Document CreatorPDFCreator Version 1.7.1
Document Author: 37534
FCC ID Filing: AK8XSPN1BT

Navigation menu