Sony 10720W GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, GPS & NFC User Manual PY7 10720W startup guide

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, GPS & NFC PY7 10720W startup guide

Contents

PY7-10720W_startup_guide

17.4INSTRUCTION MANUAL
IntroductionThank you for your purchase of "SO-02K".For proper use, read this manual carefully before and while you use the SO-02K.About manuals of SO-02K●"クイックスタートガイド (Quick Start Guide)" (Supplied accessories)Part names and functions are explained.●"Instruction Manual" (Application of the terminal)Operations and settings of each function are explained. To use "Instruction Manual" application, from the Home screen, u[Instruction Manual]. When using for the first time, download and install the application according to the onscreen instructions.You can use the application as an electronic book. You can also shift to actual operations by tapping the description in the contents or view reference contents.If you uninstall "Instruction Manual" application, access Google Play from Play Store for installing it again. From the Home screen, tap [Play Store], search "取扱説明書 (Instruction Manual)" application to select, then install it following the onscreen instructions.●"Instruction Manual" (PDF file)Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website.https://www.nttdocomo.co.jp/english/support/trouble/manual/download/so02k/index.html* The latest information can be downloaded. The URL and contents are subject to change without prior notice.❖Note・Reproduction or reprint of all or part of this manual without prior permission is prohibited.・Important information for SO-02K is posted in the following website. Be sure to check before using.http://www.sonymobile.co.jp/support/ (In Japanese only)
1Operation descriptionsIn this manual, keys (P.30) and key icons (P.45) are described with O, k, b, h, n.And operations for selecting icons or items in the key operations on the screens are described as follows.❖Information・Display examples and illustrations used in this manual are just images for explanations and may be different from actual screens or products.・In this manual, the easier procedure is described for the functions and settings which have multiple operating procedures.・Please note that "SO-02K" is called "the terminal" in this manual.・In this manual, explanations for the theme "Xperia™ Loops" are provided.・In this manual, explanations for "docomo LIVE UX" as Home application are provided (P.71). If you set the other home application, the operations may differ from the descriptions.Description OperationPress and hold k for at least 1 second.Press and hold Camera key (k) on the side of the terminal for at least 1 second.On the TV watching screen, b.On the TV watching screen, tap .From the Home screen, u[Settings]u[About phone].From the Home screen, tap   (Apps button), and then tap "Settings" on the next screen and "About phone" on the following screen.Touch and hold an icon.Keep touching an icon longer (1-2 seconds).
2・SO-02K (with warranty)・クイックスタートガイド (Quick Start Guide) (In Japanese only)・SO-02Kのご利用にあたっての注意事項安全上/取り扱い上のご注意 (Notes on usage, Safety/Handling precautions) (In Japanese only)・TV antenna cable SO01You can check or purchase optional accessories compatible with the terminal (optional) in the DOCOMO online shop.https://www.mydocomo.com/onlineshop/options/index.html (In Japanese only)Supplied accessories
Contents/Precautions3Contents■Supplied accessories. . . . . . . . . . . . . . . . .  2■About using the terminal  . . . . . . . . . . . .  5■Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . .  7■Handling precautions. . . . . . . . . . . . . . . 17■Waterproofness/Dustproofness  . . . . . 24Before Using the Terminal  . . . 30Part names and functions................................................30docomo nano UIM card....................................................31microSD card ...........................................................................33CE mark and FCC ID.............................................................36Charging.....................................................................................36Turning power on/off.........................................................42Initial settings...........................................................................43Basic operations.....................................................................44Notification LED .....................................................................50Status bar ...................................................................................50Notification panel .................................................................53Quick settings panel............................................................54Home screen............................................................................55Xperia™ Application screen ..........................................62Task manager...........................................................................70Split screen................................................................................70Switching Home application......................................... 71Searching information in the terminal and web pages ............................................................................................72Character entry.......................................................................73Setting the character entry .............................................79docomo LIVE UX . . . . . . . . . . . . . 80Home screen ........................................................................... 80Managing the Home screen.......................................... 80Application screen ............................................................... 83Display all apps....................................................................... 85Backing up and restoring the Home screen........ 85Using My Magazine............................................................. 86Checking Home application information.............. 87Phone  . . . . . . . . . . . . . . . . . . . . . . 88Making/Receiving a call.................................................... 88Operations during a call ................................................... 93Call history................................................................................. 95Call settings .............................................................................. 97Phonebook ............................................................................ 102Mail/Web browser . . . . . . . . . .107docomo mail ........................................................................ 107Message (SMS)..................................................................... 107Email........................................................................................... 110Gmail.......................................................................................... 114Early Warning "Area Mail".............................................. 115Chrome .................................................................................... 117
4Contents/PrecautionsApps  . . . . . . . . . . . . . . . . . . . . . . 120dメニュー (dmenu)............................................................ 120dmarket .................................................................................... 120Play Store................................................................................. 121Osaifu-Keitai........................................................................... 122TV.................................................................................................. 127Camera...................................................................................... 133Album........................................................................................ 145Media Player.......................................................................... 147Location services................................................................ 149Schedule.................................................................................. 152Clock........................................................................................... 153docomo Data Copy .......................................................... 154Settings  . . . . . . . . . . . . . . . . . . . 158Viewing the setting menu............................................158Wireless & networks.......................................................... 158Themes & wallpaper......................................................... 168Device........................................................................................ 168Accounts & services.......................................................... 186System....................................................................................... 190File management  . . . . . . . . . . 195Storage structure................................................................ 195File operations......................................................................195Data communication . . . . . . . 197Bluetooth function............................................................197NFC communication........................................................ 199External device connection. .202Connecting to PC .............................................................. 202Connecting DLNA device............................................. 203International roaming  . . . . . .204Overview of International roaming (WORLD WING) ........................................................................................ 204Available overseas service ............................................ 204Before using overseas ..................................................... 205Making/Receiving a call in the country you stay....................................................................................................... 208International roaming settings.................................. 210After returning to Japan ................................................ 212Appendix/Index . . . . . . . . . . . .213Troubleshooting................................................................. 213あんしん遠隔サポート (Anshin Enkaku Support)....................................................................................................... 221Warranty and After Sales Services ........................... 222Software Update ................................................................ 226Connecting to a PC to update................................... 229Main specification ............................................................. 229Certificate and compliance ......................................... 234End User Licence Agreement .................................... 234Export Controls and Regulations ............................. 235Intellectual Property Right ........................................... 236SIM unlock.............................................................................. 239Index .......................................................................................... 240
5Contents/PrecautionsContents/Pre cautions・The terminal supports LTE, W-CDMA, GSM/GPRS and Wireless LAN Systems.・Because a terminal operates using radio frequencies, it cannot be used inside a tunnel, underground, in a building or other locations where radio waves do not reach, in locations with weak radio wave condition, or out of LTE/FOMA service area. The services may not be available on the upper floors of high-rise apartments or buildings, even if there are no obstructions around you. On occasion, your calls may be disconnected even in areas with strong radio wave condition, even if you are not moving, or even if there are 4-signal icon on the terminal's display.・Because the terminal uses radio waves to communicate, it is possible that a third party may attempt to tap your calls. However, the LTE, W-CDMA, GSM/GPRS system automatically scrambles all calls through a private call feature. Therefore, even if the third party successfully intercepts your call, they will only hear noise.・The terminal operates on radio frequencies by converting voice into digital signals. If the caller moves into an area of adverse radio wave condition, the digital signal may not be restored accurately, and the voice received in the call may differ slightly from the actual voice.・The terminal supports the function that can be used by users and guests. Therefore some services or applications recognize them as the same user even after the user is switched.DOCOMO shall have no liabilities for any damage or troubles of customer or a third party resulting from using the function (P.185).・Note down the information saved in the terminal in a separate note on a regular basis or save to an external recording medium such as a microSD card or PC. Note that DOCOMO assumes no responsibility for any loss of saved contents of data resulting from malfunction, repair, changing of the model or other handling of the terminal.・As with PCs, some user-installed applications or accessed websites may disrupt the stability of the terminal performance, or unexpectedly transmit information via the Internet causing improper use of your location information as well as personal information recorded on the terminal. Therefore, verify the supplier and operating conditions of the applications or websites before using them.・This terminal has FOMA Plus-Area and FOMA HIGH-SPEED Area support.・The terminal does not support i-mode sites (programs) or i-Dppli.About using the terminal
6Contents/Precautions・The terminal automatically performs communication for synchronizing data, checking the latest software version, and maintaining a connection with the server, and for other purposes. If you transmit a large amount of data, such as when downloading applications or watching video, a packet communication charge becomes high. Subscription to Packet Pack/packet flat-rate service is highly recommended.・Depending on the applications or service you use, packet communication charge may be applied even in Wi-Fi® communication.・Public mode (Driving mode) is not supported.・Even when silent mode is on, the following sounds are not muted: the shutter sound; the sounds produced when starting and ending video recording; alarms; sounds from video and music; and the sound produced when you tap   during a call.・The name of the operator is displayed on the lock screen (P.43).・To check your phone number (own number), from the Home screen, u[Settings]u[About phone]u[Status]u[SIM status] to see "My phone number".・To check the software version, from the Home screen, u[Settings]u[About phone].・If available memory in the microSD card or the terminal is low, running applications may not operate correctly. In that case, delete the saved data.・You can update software on the terminal to the latest one (P.226, P.229).・The operating system (OS) may be upgraded via software updates to improve the quality of the terminal. For this reason, you always need to use the latest OS version. And some applications that used in the previous OS version may not be available or some unintended bugs may occur.・You can use the terminal only with a docomo nano UIM card. If you have a docomo mini UIM card, UIM, or FOMA card, bring it to a docomo Shop to replace it with a docomo nano UIM card.・Set password etc. for screen lock to ensure the security of your terminal for its loss (P.181).・If your terminal is lost, change your each account password to invalidate authentication using a PC to prevent other persons from using Google services such as Gmail or Google Play, or SNS, etc.
7Contents/Precautions・For using services and applications provided by the third party's including the applications provided by Google Inc., confirm the terms and conditions specified by Google or the providers. DOCOMO assumes no responsibility for any malfunctions resulting from the services and applications.・When a license agreement screen etc. appears, follow the onscreen instructions.・Applications and service contents are subject to change without prior notice.・The terminal supports only sp-mode, mopera U and Business mopera Internet. Other providers are not supported.・If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended.・For details on usage charge, refer to NTT DOCOMO website.・Display is manufactured by taking advantage of highly advanced technology but some dots may be always or never lit. Note that, this shows characteristics of the display and not defects in the terminals.・DOCOMO is not liable to any failures or malfunctions for commercially available optional equipment.■For safe and proper use of the terminal, please read the "Safety Precautions" prior to use.■ALWAYS observe the safety precautions since they intend to prevent personal injury or property damage.■The following symbols indicate the different levels of injury or damage that may result if the guidelines are not observed and the terminal is used improperly.Safety Precautions (Always follow these directions)Failure to observe these guidelines may "immediately result in death or serious injury(*1)".Failure to observe these guidelines may "result in death or serious injury(*1)".Failure to observe these guidelines may "result in minor injury(*2) and property damage(*3)".DANGERWARNINGCAUTION
8Contents/Precautions*1 Serious injury: This refers to loss of sight, injury, burns (high- and low temperature), electric shock, broken bones, injuries with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-term hospital attendance as an outpatient.*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital admission for treatment or long-term hospital attendance as an outpatient.*3 Property damage: This refers to extended damage to buildings, furniture, livestock, pets, etc.■The following symbols indicate specific directions.■"Safety Precautions" are described in the following categories:1. Handling the terminal, adapter, docomo nano UIM card, and TV antenna cable (common) . . .82. Handling the terminal. . . . . . . . . . . . . . . . . . . . . .  113. Handling the adapter  . . . . . . . . . . . . . . . . . . . . . .  134. Handling the docomo nano UIM card . . . . . . .  155. Handling the terminal near electronic medical equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  156. Material list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  161. Handling the terminal, adapter, docomo nano UIM card, and TV antenna cable (common) DANGERDo not use, store or leave the equipment in locations subject to high temperature or accumulation of heat (e.g. by the fire, near a heater, under a kotatsu or bedding, in direct sunlight, in a car in the hot sun).Doing so may cause fire, burns, injury, electric shock, etc.Do not put the equipment in or place near microwave ovens, cooking appliances such as IH cooking heaters, or high pressure containers such as pressure cookers.Doing so may cause fire, burns, injury, electric shock, etc.Indicates prohibited actions.Indicates not to disassemble.Indicates not to use where it could get wet.Indicates not to handle with wet hands.Indicates compulsory actions in accordance with instructions.Indicates to remove the power plug from the outlet.Don’tNo disassemblyNo liquidsNo wet handsDoUnplugDon’tDon’t
9Contents/PrecautionsDo not splash sand, soil or mud, or do not directly place the equipment on them. Also, do not touch the equipment with hands with sand etc. adhered.Doing so may cause fire, burns, injury, electric shock, etc.For waterproofness/dustproofness, see the following.⇒P.24 "Waterproofness/Dustproofness"Do not charge the terminal when it is wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.).Doing so may cause fire, burns, injury, electric shock, etc.For waterproofness, see the following.⇒P.24 "Waterproofness/Dustproofness"Do not subject the terminal to strong pressure or break the terminal. Especially when bringing the terminal putting in a pocket of clothes, do not let the terminal hit against surroundings or being put between the objects.Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.* The following are examples that you should be careful of:・Sitting or squatting with the terminal put in a pocket of trousers or skirt・Putting the terminal in a pocket of outer wear and catching them in a door or a door of car・Stepping on the terminal on a soft object such as a sofa, bed, or bedding, or on a floorDo not disassemble or modify the equipment.Doing so may cause fire, burns, injury, electric shock, etc.Do not let the equipment get wet with liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.).Doing so may cause fire, burns, injury, electric shock, etc.For waterproofness, see the following.⇒P.24 "Waterproofness/Dustproofness"Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) to get inside the charging jack or the external connection jack.Doing so may cause fire, burns, injury, electric shock, etc.For waterproofness, see the following.⇒P.24 "Waterproofness/Dustproofness"Use optional devices specified by NTT DOCOMO.Failure to do so may cause fire, burns, injury, electric shock, etc. WARNINGDo not subject the equipment to strong force, impacts, or vibration such as letting it fail, stomping or throwing it.Doing so may cause fire, burns, injury, electric shock, etc.Do not allow conductive materials (such as metal objects and pencil lead) to come into contact with the charging jack or external connection jack or dust to get inside it.Doing so may cause fire, burns, injury, electric shock, etc.Do not cover or wrap the equipment with a cloth or bedding in use or while charging.Doing so may cause fire, burns, etc.Don’tDon’tDon’tNo disassemblyNo liquidsNo liquidsDoDon’tDon’tDon’t
10Contents/PrecautionsIf charging does not finish after specified time, stop charging.Failure to do so may cause fire, burns, injury, etc. due to overcharge etc.Power off the terminal before you step into a place where flammable gas generates such as gas stations, or a place where dusts are generated. Stop charging if you charge the battery.Using the terminal in a place where flammable gas generates may cause explosion, fire, etc.When using Osaifu-Keitai in a place such as a gas station, power off the terminal before using it. (If you set "NFC / Osaifu-Keitai lock", cancel the lock and then power off the terminal.)If you notice anything unusual about the equipment such as an unusual odor, abnormal noise, smoke generation, overheating, discoloration or deformation while using or charging, or during storage, perform the following measures.・Remove a power plug from a power outlet or accessory socket.・Power off the terminal.Failure to do so may cause fire, burns, injury, electric shock, etc. if you do not follow the instructions above. CAUTIONDo not use damaged equipment.Doing so may cause fire, burns, injury, etc.Do not place on an unstable or inclined platform. Be careful especially when vibrator is set.Doing so may cause the device to fall etc. and cause injury.Do not use or keep in a place that is very humid, dusty, or subject to high temperature.Doing so may cause fire, burns, electric shock, etc.For waterproofness/dustproofness, see the following.⇒P.24 "Waterproofness/Dustproofness"If children use the terminal, parents or guardians should give them the proper instructions for use and do not allow them to use the terminal in the wrong way.Failure to do so may cause injury.Keep the equipment out of the reach of babies and infants.Failure to do so may cause accidental ingestion, injury, electric shock, etc.Be careful when using the terminal continuously for a long time or charging because temperature of the terminal may become warm. Also, be careful not to touch it unintentionally for a long time when you fall asleep etc.The terminal or adapter may become warm when using an application, a call, data communication, watching TV or video, etc. for a long time or charging.If you are directly in contact with warmed part for a long time, it may cause a redness of skin, itch, rash, low-temperature burn etc. depending on your physical condition.DoDoDoDon’tDon’tDon’tDon’tDon’tDo
11Contents/Precautions2. Handling the terminal DANGERDo not throw the terminal into fire or apply heat.Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.Do not put excessive force such as sticking a nail (sharp object) into the terminal, hitting it with a hammer (hard object), or stepping on it.Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.If the internal substance etc. of the terminal contacts your eyes, immediately rinse your eyes with clean water and see a doctor right away.Failure to do so may cause blindness, medical problem, etc. due to effects of the internal substance of the terminal etc. WARNINGDo not turn on the light or flash with the lighting luminescence part close to the other people's eyes. Keep enough distance away especially from babies and infants.Doing so may cause blurred vision etc. Or it may dazzle his/her eyes or scare him/her causing an accident such as injury.Do not turn on or flash the light toward a driver of a car etc.Doing so may disturb driving and cause an accident etc.Do not watch a repeatedly-blinking screen for a long time.Doing so may cause cramp, loss of consciousness, etc.Do not allow a foreign substance such as water (drinking water, sweat, seawater, urine of pet animals, etc.) and other liquids, metal parts, or flammables to get in the slot of the docomo nano UIM card or microSD card on the terminal. Do not insert the docomo nano UIM card or a microSD card into wrong slot, or insert it in wrong orientation.Doing so may cause fire, burns, injury, electric shock, etc.Do not expose the camera lens to direct sunlight for an extended period.Doing so may cause fire, burns, injury, etc. by the light-collecting mechanism of the lens.Power off the terminal or put it in Airplane mode before boarding an airplane.Use of mobile phones on board is restricted. Follow the instructions of each airline.Failure to do so may adversely affect on-board electronic equipment.Prohibited acts related to mobile phone usage on an airplane may be punished by law.Follow the instructions of each medical facility for the use of mobile phones on their premises.Power off the terminal in a place where the use is prohibited.Failure to do so may affect electronic equipment and electronic medical equipment.Don’tDon’tDoDon’tDon’tDon’tDon’tDon’tDoDo
12Contents/PrecautionsAlways keep the terminal away from your ear when you talk with hands-free set, while the ringtone is loudly sounding, or in stand-by mode.Also, when you play game, play back videos or music, etc. connecting the earphone/microphone, etc. to the terminal, adjust the volume adequately.Loud sound is emitted from the terminal when calling with hands-free set. Even in standby mode, a ringtone or an alarm sound may sound suddenly. Listening to loud sound for long hours continuously may cause a disability of ears such as deafness. Moreover, too loud sound makes you to barely hear the surrounding sounds and may cause an accident.If you have a weak heart, set the vibrator or ringtone volume carefully.Failure to do so may affect your heart.If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation may be affected by radio waves.The radio waves from the terminal may affect electronic medical equipment.Power off the terminal near electronic devices or equipment operating on high precision control or weak signals.Failure to do so may interfere with the operation of electronic devices or equipment.* The following are some electronic devices or equipment that you should be careful of:Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical equipment, and other automatically controlled devices or equipment.If you use an implantable cardiac pacemaker, implantable cardioverter defibrillator, or other electronic medical equipment, check with the medical electronic equipment manufacturer or vendor whether the operation can be affected by radio waves.Be careful about broken glasses or exposed internal part of the terminal if the display or the camera lens is broken.Touching damaged or exposed area may cause burns, injury, electric shock, etc.If the internal battery leaks or gives off a strange smell, immediately remove it from the vicinity of open flames.The leaking liquid may ignite fire, catch fire, explode etc.Be careful not to allow a pet etc. to bite the terminal.Doing so may cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.DoDoDoDoDoDoDo
13Contents/Precautions CAUTIONWhen using the motion sensor, check the safety around you, hold the terminal firmly, and do not shake it unnecessarily.Failure to do so may cause accident such as injuries.If the internal substance is leaked due to damage of the display, do not get it on your skin such as face, hands, or cloths etc.Doing so may cause injury etc. on your eyes or skin.If the internal substance etc. gets into your eyes or mouth, or contacts skin or clothes, immediately rinse the contacted area with clean water.If the substance gets into the eyes or mouth, immediately see a doctor after rinsing.Do not dispose of the terminal together with usual trash.Doing so may ignite causing fire, burns, injury, etc. Also, it may cause environmental destruction. Bring the unnecessary terminal into a sales outlet such as docomo Shop. If your local municipality has a battery recycling program, dispose of them as provided for.If the substance etc. leaks out from the internal battery, do not make it contact with your skin of face or hands, cloths, etc.Doing so may cause injury etc. on your eyes or skin.If the internal substance etc. gets into your eyes or mouth, or contacts skin or clothes, immediately rinse the contacted area with clean water.If the substance gets into your eyes or mouth, immediately see a doctor after rinsing.To use the terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using.In rare cases, using the terminal in some vehicle models can cause the vehicle's electronic equipment to malfunction. In that case, stop using the terminal immediately.If abnormalities on skin are developed by using the terminal, immediately stop using and take medical treatment. The use of the terminal may cause itching, rashes, eczema, or other symptoms depending on the user's physical condition.For material of each part, see the following.⇒P. 1 6 " M a t e r i a l  li s t "Make sure not to get metal objects (blade of cutter, staples, etc.) adhered because magnetic parts are used on the earpiece/speaker, or speaker of the terminal.Such adhered objects may cause injury etc.Watch the display in an adequately bright place taking a certain distance from it.Watching in a dark place or closely may reduce visual acuity etc.3. Handling the adapter WARNINGDo not use the adapter cord if it gets damaged.Doing so may cause fire, burns, electric shock, etc.Don’tDon’tDon’tDon’tDoDoDoDoDon’t
14Contents/PrecautionsDo not use the adapter in a humid place, such as a bathroom.Doing so may cause fire, burns, electric shock, etc.DC adapter is only for a negative ground vehicle. Do not use DC adapter for a positive ground vehicle.Doing so may cause fire, burns, electric shock, etc.Do not touch the adapter if you hear thunder.Doing so may cause electric shock etc.Do not short-circuit the charging jack while it is connected to a power outlet or accessory socket. Do not touch the charging jack with your hands, fingers, or any part of your body.Doing so may cause fire, burns, electric shock, etc.Do not place heavy objects on the adapter cord, or do not apply unnecessary force such as pulling etc.Doing so may cause fire, burns, electric shock, etc.When you insert/remove a plug of AC adapter to/from power outlet, do not let it to contact with metal objects.Doing so may cause fire, burns, electric shock, etc.Do not connect the voltage converter for overseas travel (travel converter) to the AC adapter.Doing so may cause ignition, overheating, electric shock etc.Do not put an excessive force to the connection part with the adapter connected to the terminal.Doing so may cause fire, burns, injury, electric shock, etc.Do not touch the adapter cord, charging jack or power plug with wet hands.Doing so may cause fire, burns, electric shock, etc.Use the adapter only on the specified power supply and voltage.When charging the terminal overseas, use AC adapter for global use.Using the incorrect power supply and voltage may cause fire, burns, electric shock, etc.AC adapter : 100V AC (Make sure to connect the adapter to a household AC power outlet.)AC adapter for global use : 100V to 240V AC (Make sure to connect the adapter to a household AC power outlet.)DC adapter : 12V or 24V DC (only for a negative-ground vehicle)When replacing a fuse in a DC adapter, make sure to use the specified fuse.Using a fuse other than specified may cause fire, burns, electric shock, etc. For the specified fuse, check a manual that comes with a DC adapter.Clean dust from the power plug.Using it with dust adhering may cause fire, burns or electric shock.When you connect the adapter or accessory socket to a power outlet, insert it firmly.Insecure inserting may cause fire, burns, electric shock, etc.Don’tDon’tDon’tDon’tDon’tDon’tDon’tDon’tNo wet handsDoDoDoDo
15Contents/PrecautionsWhen you disconnect the power plug from an outlet or accessory socket, do not apply excessive force it such as pulling the cord of the adapter. Instead, hold the adapter to disconnect.Pulling the cord may damage the cord and it may cause fire, burns, electric shock, etc.When plugging/unplugging an adapter into/from the terminal, plug/unplug the adapter straightly toward the jack without applying excessive force such as pulling the cord etc.Incorrect plugging/unplugging may cause fire, burns, injury, electric shock, etc.If the charging terminal is deformed such as being bent etc., stop using immediately. Do not use it with the deformation restored.Doing so may cause fire, burns, injury, etc. due to short-circuit of charging terminal.Always remove the power plug of adapter from an outlet or accessory socket when not using it.Keeping with connected to the power plug may cause fire, burns, electric shock, etc.Immediately remove the power plug from an outlet or accessory socket if liquid such as water (drinking water, sweat, seawater, urine of pet animals, etc.) enters inside.Failure to do so may cause fire, burns, electric shock, etc.Before cleaning, remove the power plug from a power outlet or accessory socket.Failure to do so may cause fire, burns, electric shock, etc. CAUTIONDo not touch the adapter for a long time when it is connected to a power outlet or accessory socket.Doing so may cause a burn etc.4. Handling the docomo nano UIM card CAUTIONBe careful of the cut surface not to hurt your body parts such as fingers when handling docomo nano UIM card.Failure to do so may cause injury.5. Handling the terminal near electronic medical equipment WARNINGIf you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the terminal 15 cm or more away from the implant at all times.The radio waves from the terminal may affect the performance of electronic medical equipment.DoDoDoUnplugUnplugUnplugDon’tDoDo
16Contents/PrecautionsIf you need to use electronic medical equipment other than implantable cardiac pacemaker or implantable cardioverter defibrillator outside medical facilities such as treating at home, check with the relevant medical electronic equipment manufacturer whether the operation may be affected by radio waves.The radio waves from the terminal may affect the performance of electronic medical equipment.When you get close to other people within 15 cm just like not having enough space to turn around, set the radio wave of the terminal to OFF beforehand (Airplane mode, to Power off, etc.).A person in close proximity may put on implanted a medical electrical equipment such as pacemakers and ICDs. The radio waves from the terminal may affect the performance of electronic medical equipment.Follow the instructions of each medical facility for the use of the terminal on their premises.Failure to do so may have effects on the operation of the electronic medical equipment.6. Material listDoDoDoPart Material Surface treatmentExterior case (frame) Nylon resin (with glass fiber)CoatingExterior case (headset jack)Nylon resin (with glass fiber)―Exterior case (back), Volume key, Camera keyAluminum alloyAlumite treatmentExterior case (lower part of back, cover of docomo nano UIM card/microSD card slot)Polycarbonate resinCoatingExterior panel (top surface part, bottom surface part)PET resin UV moldedTransparent plate (Display, Camera lens)Hardened glass AFP treatmentTransparent plate (Flash/Photo light, Laser AF sensor, RGBC-IR sensor)Polycarbonate resin + Acrylic resin combined materialsHard coating treatmentPower key IC + Epoxy resinCoating + PrintingEarpiece/speaker (upper) panel, speaker (lower) panelPET resin CoatingCamera ring (back side) Stainless steel PVD mark sticker PET resin―
17Contents/Precautions■ Common precautions・ SO-02K is waterproof/dustproof; however, do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) or foreign objects such as dust to enter inside of the terminal or adhere to accessories or optional devices.The adapter, the docomo nano UIM card, and the TV antenna cable are not waterproof/dustproof. Do not use in a bathroom or other highly humid area or do not let rain touch. Or putting them on your body, humidity of sweat may cause internal corrosion and malfunction. Malfunctions which are determined to be caused by water as result of inspections are not covered by the warranty. For repairs, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only) or DOCOMO-specified repair office.・Waterproofness/dustproofness may not be maintained if the terminal has abnormity in appearance such as damage or deformation. In this case, contact "Repairs (Inquiries/Request)" on the last page of this manual (in Japanese only).・Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).- Do not rub it roughly with a dry cloth. The display may be damaged.Waterproof rubber of the cover of docomo nano UIM card/microSD card slotSilicon rubber―docomo nano UIM card/microSD card trayPolyacetal resin―TV antenna cable : headset jack (top surface), connector plug (top surface)Polypropylene resin―TV antenna cable : headset jack (body), connector plug (body), cableElastomer resin―TV antenna cable : connector plug (metal part)Brass Gold plating treatmentPart Material Surface treatmentHandling precautions
18Contents/Precautions- Drops of water or dirt left on the display may cause stains.- Do not use alcohol, thinner, benzine, cleaning detergent, etc. to clean the terminal. These chemicals may erase the printing on the terminal or cause discoloration.・Clean the jacks or the fingerprint sensor occasionally and use the terminal in a clean state. If the jack etc. is dirt, you may not use the terminal normally. When cleaning, be careful not to damage the jack etc.・Do not leave the terminal near the air conditioning vent. Extreme temperature changes may produce condensation and corrode the internal parts of the terminal, causing the terminal to malfunction.・Make sure to use the terminal without excessive force. Putting the terminal in a bag full of items or sitting down with the terminal in the pocket of your cloth may damage the display, internal circuit board, internal battery, etc. and cause a malfunction. Also, doing so while the external device is connected to the external connection jack may cause damage or a malfunction.・Use the optional devices specified by NTT DOCOMO. Failure to do so may cause a malfunction or damage.・Read the user's manual supplied with each optional device.・Do not drop the terminal or give a strong impact to the terminal. Doing so may cause a malfunction or damage.■ The terminal precautions・Do not press the display strongly, or not operate with a sharp-pointed objects. The display may get scratched and it may cause a malfunction or damage.・Do not use the terminal in extremely hot or cold places. Use the terminal where the temperature ranges between 5℃ and 40℃ (limited to the temporary use in a bathroom etc. when temperature is above 36℃) and humidity ranges between 45% and 85%.・Using the terminal near a land-line phone, television or radio may cause interference in such electric appliance.・Back up data that you saved to the terminal to a microSD card, a PC, or cloud, etc., or note down in a separate note and keep it safely. NTT DOCOMO is not liable for any loss of data saved in the terminal.・Do not insert the plug of external device to the external connection jack at a slant when connecting. Or, do not pull the plug when they are connected. Doing so may cause a malfunction or damage.・The terminal could become warm while in use and charging. You can continue using the terminal.
19Contents/Precautions・Do not expose the camera lens under direct sunlight. If you do so, some of the elements may melt or become faded.・Usually, keep the cover of docomo nano UIM card/microSD card slot closed during use. Failure to do so may allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) or foreign objects such as dust to enter inside and cause a malfunction.・Do not subject the fingerprint sensor to strong impact or scratch it. Doing so not only may cause a malfunction of the fingerprint sensor, but authentication may become unavailable.・While the microSD card is being used, do not take the card out and do not turn off the terminal. Doing so may cause data loss or malfunction.・Keep off a magnetic card or a magnetic object from the terminal. The magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased. Also, strong magnetic objects may cause a malfunction of the terminal.・Do not decorate the terminal with a film or stickers. Doing so may hinder the proper operations for functions using the proximity/light sensor. For a location of proximity/light sensor, see the following. ⇒P.30 "Part names and functions"・The internal battery is out of the warranty due to a consumable part. The internal battery may become swelled toward the end of battery life depending on usage condition of the internal battery. Replace the internal battery if the usable time is extremely shortened even in a full charge or when the internal battery is swollen. For replacing internal battery, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only) or DOCOMO-specified repair office.・Charge the battery in an environment with the proper ambient temperature (5℃ to 35℃).・The operating time of the internal battery varies depending on the operating environment and the degradation level of the internal battery.・To store the terminal, avoid the following conditions so as not to degrade the performance or the battery life of the internal battery.- The battery is fully charged (immediately after the charging is complete)- The battery has run out (the terminal cannot power on)An appropriate battery level for storing is about 40%.・Type of internal battery for the terminal is as follows.Display Type of BatteryLi-ion 00 Lithium Ion Battery
20Contents/Precautions■ Adapter precautions・Charge the battery in an environment with the proper ambient temperature (5℃ to 35℃).・Do not charge in the following places.- Places that are very humid, dusty or exposed to strong vibrations- Near land-line phone or TV/radio・The adapter may become hot during charging. This condition is not abnormal.・When using the DC adapter for charging, do not turn off the vehicle engine.Doing so may cause the exhaustion of vehicle battery.・When you use the power outlet with a mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual.・Do not subject the equipment to a strong impact. Do not deform the charging jack.Doing so may cause malfunction.■ docomo nano UIM card precautions・Do not use unnecessary force to insert/remove the docomo nano UIM card.・Note that DOCOMO assumes no responsibility for any malfunctions resulting from inserting the docomo nano UIM card into another IC card reader/writer and using it.・Clean the IC part occasionally and use it in a clean state. If the IC is dirt, it may not be used properly.・Clean the terminal with a dry soft cloth (such as used for cleaning eyeglasses).・Back up data that you saved to the docomo nano UIM card to a microSD card, a PC, or cloud, etc., or note down in a separate note and keep it safely. NTT DOCOMO is not liable for any loss of data saved in the terminal.・Take an expended docomo nano UIM card to a sales outlet such as docomo Shop for proper disposal in order to protect the environment.・Do not carelessly damage, contact, or short-circuit an IC.Doing so may cause data loss or malfunction.・Do not drop a docomo nano UIM card or subject it to impact.Doing so may cause malfunction.・Do not bend a docomo nano UIM card or place a heavy object on it.Doing so may cause malfunction.
21Contents/Precautions・Do not insert a docomo nano UIM card into the terminal if a label or seal is attached to the card.Doing so may cause malfunction.■ Bluetooth® function precautions・To secure the Bluetooth communication security, the terminal supports the security function compliant with Bluetooth standards, but the security may not be sufficient depending on the setting. Be aware of security risks when using Bluetooth.・Please be aware that DOCOMO is not responsible for any data leakage that might occur when communicating data via Bluetooth.・Frequency bandThe frequency band used by the terminals Bluetooth/wireless LAN function is written as follows:・Bluetooth cautionsThe operating frequency band of the terminal is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as "another station").- Before using this equipment, confirm that "another station" is not being operated nearby.- In the event of the terminal causing harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc.- If you have further questions, contact "General Inquiries" on the last page.2.4 :  This radio equipment uses the 2400 MHz band.FH/XX/DS/OF:Modulation scheme is the FH-SS, other system, DS-SS, or OFDM system.4 :  The estimated interference distance is 40 m or less.8 :  The estimated interference distance is 80 m or less. :  The full band between 2400 MHz and 2483.5 MHz is used and the band of the mobile identification device can be avoided.Available channels vary depending on the country.For use in an aircraft, contact the airline beforehand.
22Contents/Precautions■ Wireless LAN (WLAN) precautions・Wireless LAN (WLAN) exchanges information using radio waves, and allows you to freely establish LAN connection if you are within an area where radio waves reach. However, without appropriate security settings, communications may be intercepted or hacked by malicious parties. It is recommended to configure necessary security settings on your own judgment and responsibility.・Wireless LANDo not use wireless LAN near magnetic devices such as electrical appliances or AV/OA devices, or in radio waves.- Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven).- When used near TV, radio, etc., reception interference may occur, or channels on the TV screen may be disturbed.- If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly.・2.4GHz device cautionsThe operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).- Before using the device, confirm that premises radio stations for identifying mobile units, specified low power radio stations and amateur radio stations are not being operated nearby.- If the device causes harmful radio interference to premises radio stations for identifying mobile units, immediately change the frequency band or stop use, and contact "General Inquiries" on the last page for crosstalk avoidance, etc. (e.g. partition setup).- If the device causes radio interference to specified low power radio stations or amateur radio stations, contact "General Inquiries" on the last page.・5GHz device cautionsThe terminal can use 3 frequency bands of 5.2GHz band (W52), 5.3GHz band (W53), 5.6 GHz band (W56).- 5.2GHz band (W52/36, 40, 44, 48 ch)- 5.3GHz band (W53/52, 56, 60, 64 ch)- 5.6GHz band (W56/100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch)Using wireless LAN built-into the terminal in 5.2/5.3 GHz outside is prohibited by the Radio Law.
23Contents/Precautions■FeliCa® and NFC reader/writer function precautions・FeliCa and NFC reader/writer, P2P function of the terminal use weak waves requiring no licenses for radio stations.・They use 13.56 MHz frequency band. When the other FeliCa or NFC reader/writer, P2P function is used in the surroundings, keep the terminal away sufficiently from them. Before using, confirm that there are no radio stations using the same frequency band nearby.・For use in an aircraft, contact the airline beforehand. Some countries may restrict the use of the function. Check the regulations of the country/region before using it.■ Note・Do not use a remodeled terminal. Using a remodeled terminal violates the Radio Law/Telecommunications Business Act.The terminal is compliant with rules on the technical standard conformance of specified wireless equipment based on the Radio Law/Telecommunications Business Act, and as a proof of it, the "Technical Compliance Mark  " is depicted on the electronic nameplate of the terminal. To check the certificate, from the Home screen, u[Settings]u[About phone]u[Certificates].If you remove the screws and alter the inside of the terminal, the technical regulations conformity certification becomes invalid.Do not use the terminal with the certification invalid, as it is a violation of the Radio Law and Telecommunications Business Act.・Be careful when using the terminal while driving.Use of the terminal holding with your hand while driving will result in a penalty.However, absolutely necessary cases such as rescue of a sick person or maintaining public safety are exempted.・The FeliCa and the NFC reader/writer functions are compliant with the wireless standards of Japan.  Check the regulations of the country/region beforehand if you try to use the function overseas.・Do not alter the basic software illegally.It is regarded as the software modification and Repairs may be refused.GSM/GPRS/EDGE 850, 900, 1800, 1900MHz.UMTS 2100 (Band I), 850 (Band V),800 (Band VI), 800 (Band XIX)MHz.LTE (Bands 1, 3, 4, 5, 7, 12, 13, 17, 19, 21, 28, 38, 39, 40, 41,42).WLAN 2.4G/5G, NFCGSM 850/900 : Power Class 4, DCS(1800)/PCS(1900) : Power Class 1, UMTS : Power Class 3,LTE : Power Class 3, 2.4GHz<100mW, 5.15-5.35GHz<200mW, 5.47-5.725GHz<500mW,5.735-5.835GHz<25mW, NFC 13.56MHz
24Contents/PrecautionsSO-02K provides waterproofness property of IPX5*1, IPX8*2, and dustproofness property of IP6X*3 with the cover of docomo nano UIM card/microSD card slot firmly attached.*1 IPX5 means that a phone keeps functioning after applying a jet flow of 12.5 L/min. from every direction from a distance of approximately 3 m for at least 3 minutes using water nozzle in 6.3 mm inner diameter.*2 IPX8 means that a phone keeps functioning after SO-02K is slowly submerged to depth of 1.5 m in static tap water at room temperature, left there for approximately 30 minutes and then taken out.*3 IP6X indicates that a phone has the ability to prevent dust from entering even when it has been shaken for 8 hours in an apparatus containing dust particles 75 μm or less in diameter.・You can talk without an umbrella in the rain (for rainfall of 20 mm or less per hour).- Do not open or close the cover of docomo nano UIM card/microSD card slot with wet hands or with water droplets on the terminal.・You can wash the terminal when it gets dirt or stained with liquid other than tap water.- Wash the terminal with tap water at normal temperature (5℃-35℃) by weaker water flow (less than 6 L/min.) at distance of approximately 10 cm away from the tap or shower.- When washing the terminal, hold the cover of docomo nano UIM card/microSD card slot closed, and wash the terminal with your hands, not using a brush or sponge. After washing, drain the terminal before use (P.28).・You can use at a poolside. Do not throw water from the pool on the terminal, or soak it in pool water.Waterproofness/DustproofnessWhat you can do with waterproofness/dustproofness of SO-02K
25Contents/Precautions・You can use the terminal in a bathroom.- Do not immerse the terminal into a bathtub. Also, do not use the terminal in hot water. Doing so may cause malfunction. If you should fall the terminal into the bathtub, immediately pick it up to drain water in specified procedure (P.28).- Never put the terminal in hot spring water or water containing soap, detergent or bath powder. In case the terminal gets wet with water other than tap water, wash it in the procedure above.- You can use the terminal within 2 hours in a bathroom where the temperature ranges between 5 and 45℃ and humidity ranges between 45 and 99%.- Rapid temperature change may cause condensation. In case of bringing the terminal from a cold place to warm place such as a bathroom, wait until the terminal reaches the room temperature.- Do not put hot water from a faucet or shower.To avoid water ingress, be sure to observe the following points.・Do not throw any liquid other than room temperature tap water on the terminal, or soak it in such liquid.・Firmly close the cover of docomo nano UIM card/microSD card slot. Even a fine obstacle (one hair, one grain of sand, tiny fiber, etc.) put between contact surfaces may allow water to enter.・Do not poke the earpiece/speaker, microphone/speaker, speaker, second microphone, headset jack, or USB Type-C™ jack with a sharp object.・Do not let the terminal fall. It may become scratched causing the waterproof/dustproof performance to degrade.・The rubber gasket on the inner side of the cover of docomo nano UIM card/microSD card slot plays an important role in keeping waterproof/dustproof performance. Do not remove or damage them. Also, prevent dust from adhering to them.To ensure waterproofness/dustproofness
26Contents/Precautions■ Opening the cover of docomo nano UIM card/microSD card slotPut your tip of finger (fingernail) into the groove and draw the cover out in the arrow direction.If the cover of docomo nano UIM card/microSD card slot is opened and closed, the terminal restarts.■ Closing the cover of docomo nano UIM card/microSD card slotPush the tray all the way in the arrow direction and firmly press   parts and make sure that there are no gaps between the terminal and the cover.It is recommended to replace the parts for maintaining waterproof/dustproof property once every two years regardless of whether any abnormality is present. DOCOMO replaces the parts as a chargeable service. Bring the terminal to a sales outlet such as a DOCOMO-specified repair office.
27Contents/PrecautionsDo not perform actions shown in the illustrations below.Observe the following precautions to use the terminal properly.・Accessories and optional devices are not waterproof/dustproof.・Do not apply water flow stronger than allowed (P.24). SO-02K  provides IPX5 waterproofness, but doing so may cause malfunction.・If the terminal gets wet with salt water, sea water, refreshing beverage or mud or sand adhered, wash it immediately. If they dry out, it is hard to remove the dirt and it may cause damage or malfunction.・Do not put the terminal in hot water, use it in a sauna or apply hot airflow (from a hair dryer etc.) to it.・Do not move the terminal in water or slam the terminal against the surface of water.・If you put the terminal in tap water, be sure to have it within 30 minutes.・When you use the terminal in swimming pool, obey rules of the facility.・The terminal does not float on water.・Do not leave water on the terminal. In cold region, the terminal freezes up and may cause malfunction.・Do not leave water droplet on the earpiece/speaker, microphone, speaker, second microphone, and headset jack. Such water may interfere with talking.・If the terminal gets splashed with water or other liquid while the cover of docomo nano UIM card/microSD card slot is open, the liquid may get inside the terminal, causing electric shock or malfunction. Stop using the terminal, turn off the power and contact a DOCOMO-specified repair office.・If the rubber gasket on the inner side of the cover of docomo nano UIM card/microSD card slot is damaged or deformed, have it replaced at a DOCOMO-specified repair office.・Do not connect TV antenna cable, earphones, etc. when the terminal is wet with water. Doing so may cause malfunction.Important precautions<Example>Washing with brush/spongeUsing Soap/Detergent/Bath powderMachine-washingApplying strong water owSoaking in ocean waterUsing in hot springAttaching sand/mud
28Contents/PrecautionsDOCOMO does not guarantee actual operations under all states. Malfunctions deemed to be caused by inappropriate operation by the customer are not covered by the warranty.When the terminal is wet, water may flow out after wiping it off; drain the water in the following steps.aHold the terminal firmly and wipe off moisture on the terminal surface and back side with dry, clean cloth etc.bShake the terminal about 20 times, firmly holding it, until no more drops of water come out (shown left). Do the same with the terminal upside down (shown right).cTo wipe any water off the gaps or the following parts, tap the terminal against a dry, clean cloth or similar material about 10 times.・Earpiece/speaker・Microphone・Speaker・Second microphone・Headset jack・USB Type-C jack・Power key/Screen lock key/Fingerprint sensor・Volume key/Zoom key・Camera key・Cover of docomo nano UIM card/microSD card slotDraining water from the terminal
29Contents/PrecautionsdWipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.・Wipe off water drained from the terminal with dry, clean cloth etc., and dry naturally.・Do not wipe off water remaining in gaps directly with a cotton swab etc.・Dry the terminal naturally for about 3 hours at room temperature.Check the following before and after charging.・Check if the terminal is not wet. Never charge the battery when the terminal is wet.・Accessories and optional devices are not waterproof/dustproof.・When charging the battery when or after the terminal is wet, adequately drain it and wipe off water with a dry, clean cloth etc.・Do not use the AC adapter in a bathroom, shower room, kitchen, lavatory, or other humid area. Doing so may cause fire or electric shock.・Do not touch the AC adapter with wet hands. Doing so may cause electric shock.・Never connect a Type-C plug if the terminal is wet. Although the terminal is waterproof, inserting a Type-C plug when the terminal is wet may cause an electric shock or short circuit due to moisture or foreign matter on the terminal or the Type-C plug. This can cause excessive heat, malfunction, fire, burn injury, electric shock, etc.Notes on charging
30Before Using the Terminaladocomo nano UIM card/microSD card slotbNotification LED→P. 5 0cFront camera lensdEarpiece/speakereProximity/light sensor : Detects a face getting closer to the touch screen during a call and turns it off to prevent misoperation, and helps with automatic screen brightness control.fTouch screen→P. 4 4gSpeakerhVolume key/Zoom keyiO Power key/Screen lock key/Fingerprint sensor→P. 4 2 ,  P. 1 8 2jk Camera key→P.134, P.137, P.139kCamera lenslLaser AF sensor : When shooting, it detects distance to a subject and focus on automatically.mRGBC-IR sensor : When shooting, it detects elements of light source of shooting environment to adjust white balance automatically.nFlash/Photo lightoLTE/FOMA antenna section*1pWi-Fi/Bluetooth antenna section*1q markrLTE/FOMA/GPS antenna section*1sWi-Fi antenna section*1tNameplate*2uHeadset jack→P.128, P.231vSecond microphone : Reduces noise to make voice to be listened easily.wMicrophonePart names and functionsb c d ehhhauvw xofgsrtqopok m nlTopBottomRightLeft BackFront
31Before Using the TerminalxUSB Type-C jack*1 The antenna is built into the terminal. Covering around the antenna with your hand may affect the quality of communications.*2 A sticker bearing the CE mark, FCC ID, IMEI information, etc. is attached. Please do not peel off the sticker or remove the nameplate.❖Note・Do not put a sticker or other material on the proximity/light sensor, laser AF sensor, or RGBC-IR sensor.・The back cover cannot be removed. Attempting to remove the back cover with excessive force may cause damage or malfunction.・The battery is built into the terminal and not removal.The docomo nano UIM card is an IC card recorded user information such as your phone number etc.・You can use the terminal with a docomo nano UIM card. If you have a docomo mini UIM card, UIM, or FOMA card, bring it to a docomo Shop to replace it with a docomo nano UIM card.・When docomo nano UIM card is not inserted to the terminal, making calls, packet communication, etc. are not available.・For details on the docomo nano UIM card, refer to the docomo nano UIM card manual or NTT DOCOMO website.・If a microSD card is installed, be sure to unmount it (P.35) (to disable reading/writing) before installing or removing the docomo nano UIM card.・Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25).■ Security codes of the docomo nano UIM cardThe docomo nano UIM card has a security code called a PIN code. The code is set to "0000" at subscription, which you can change by yourself (P.181).❖Information・Please be careful not to touch or scratch the IC when you handle the docomo nano UIM card. Doing so may cause malfunction or damage.docomo nano UIM card
32Before Using the Terminal1Draw the cover of docomo nano UIM card/microSD card slot (P.26).2Pull the tray straight out from the terminal.3With the IC side facing up, place the docomo nano UIM card on the tray.・Make sure that the corner cut of the card is oriented properly.・Be sure to fit the docomo nano UIM card into the tray so that it does not shift.4Hold the terminal horizontally and insert the tray with the card into the terminal and push it straight.・Be careful about the direction to insert of the tray.5Push the tray into the end and firmly press the   parts and make sure that there are no gaps between the terminal and cover.Inserting docomo nano UIM card
33Before Using the Terminal1Draw the cover of docomo nano UIM card/microSD card slot (P.26).2Pull the tray straight out from the terminal. (P.32).3Remove the docomo nano UIM card from the tray.4Insert the tray into the terminal and push it straight.・Be careful about the direction to insert of the tray.5Firmly push the tray into the end and make sure that there are no gaps between the terminal and cover (P.32).You can save data in the terminal to a microSD card or import data from the microSD card to the terminal. You can use microSD card for any other compatible devices.・The terminal supports microSD card of up to 2 GB, and microSDHC card of up to 32 GB, microSDXC card of up to 256 GB (As of May, 2017).・For compatible microSD cards, contact manufacturers of microSD cards.・A microSDXC card can be used only on a compatible device. Do not insert a microSDXC card into a non-microSDXC-compatible device may damage or destroy data saved on the microSDXC card.・If you want to reuse a microSDXC card on which data is destroyed, format microSDXC card (all data will be erased) on an SDXC-compatible device.・When copying data to/from a non-SDXC-compatible device, use a card (microSDHC card , microSD card, etc.) complying with standards of device.Removing docomo nano UIM cardmicroSD card
34Before Using the Terminal・The terminal supports microSD cards of up to Class 10 and UHS speed class 1. Note that the speed class indicates performance of microSD cards and all the functions may not be performed at the speed class rate.・Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25).1Draw the cover of docomo nano UIM card/microSD card slot out (P.26).2Pull the tray out straight from the terminal to remove.3Set microSD card into the tray with the contacts side facing up.・Set a microSD card surely into the tray not come off.4Hold the terminal horizontally and insert the tray with the card and press it straight into the slot.・Be careful about the direction to insert of the tray.Installing microSD card
35Before Using the Terminal5Push the tray into the end and firmly press   parts and make sure that there are no gaps between the terminal and the cover.・ appears on the status bar and writing to the microSD card is enabled.Make sure to unmount microSD card (make reading/writing unavailable) before removing.・Opening/closing the cover of docomo nano UIM card/microSD card slot (P.25).1From the Home screen, u[Settings]u[Storage & memory].2[Storage usage]uTap   of "SD Card".・The microSD card is unmounted.3Draw the cover of docomo nano UIM card/microSD card slot out (P.26).4Pull the tray out straight from the terminal to remove (P.34).5Remove the microSD card from the tray.6Hold the terminal horizontally and insert the tray and press it straight into the slot.・Be careful about the direction to insert of the tray.Removing microSD card
36Before Using the Terminal7Firmly push the tray into the end and make sure that there are no gaps between the terminal and the cover (P.35).1Open the docomo nano UIM card slot cover, and insert a fingernail into the hook at the edge of the label tray, then pull it out straight.The internal battery is not fully charged at the time of purchase.・Estimated charging time (P.229)The charging time varies by the internal battery condition or operating environment.・Estimated usage time (P.229)・The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases.・When the battery usage time per one charge becomes about half of that at the time of purchased, replacing the internal battery is recommended because the internal battery is near the end of life.・Watching TV etc. for a long time while charging may shorten the lifetime of the internal battery.・To check the charging performance, from the Home screen, tap u[Settings]u[About phone]u[Status]u[Battery life].CE mark and FCC IDChargingOperation time on full charge (estimate)Life of the internal battery
37Before Using the Terminal・It is recommended to use the AC Adapter 06 (optional) for charging. For details on the AC Adapter 06, refer to the AC Adapter 06 manual.・The AC Adapter 06 is compatible with 100V to 240V AC. For using the terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the terminal.・Use a compatible AC adapter or USB cable A to C for charging. If you use a charger other than compatible ones, charging may not be available or operations may not be performed correctly.・Insert and remove the AC adapter cord or USB cable A to C slowly and evenly so that excessive force is not applied.・When charging starts while the power is on, a sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.50).・To check the battery level, see the status bar at the top of the screen or from the Home screen, tap u[Settings]u[About phone]u[Status] to see "Battery level".・If you start charging with the terminal powered off, the screen indicating charging status activates although you cannot operate the terminal. Therefore, do not charge the battery in a place where the powering off is required.Battery Care is a function that learns your charging habit (time zone for connecting to charging equipment long) to adjust charging speed and keep battery performance better so as to extend battery life.■ Starting "Battery Care" functionIt predicts the time when charging equipment will be disconnected by learned charging habit and adjusts charging speed so that the battery become fully charged at the time.After start of charging with Battery Care, charging pauses once short of full charge. And then charging resumes near estimated full charge time to be on time for full charge.Before chargingSaving battery life (Battery Care)
38Before Using the Terminal■ Switching normal charging・From the Home screen, u[Settings]u[Battery]u[Battery Care]uTap   to turn off Battery Care.・To temporarily stop Battery Care charging and switch to normal charging, drag the status bar down and tap the notification of Battery Care charging.❖Note・It may take 7 days or more to complete learning your habit.・If regularity in your charging habit cannot be found, Battery Care does not start because incomplete of the learning and normal charging will be performed.・If you remove charging equipment during Battery Care charging, the terminal may not be fully charged.To charge the battery using the Desktop Holder SO27 (optional) and AC Adapter 06 (optional), operate the following steps.・Depending on the thickness of the terminal, please install the attachment that was included with the desktop holder before charging. Placing the terminal on the desktop holder without the attachment on it may damage the USB Type-C jack or other parts.・When you do not attach a commercially available case or cover to the terminal, attach the Attachment 52B (P.39) to the desktop holder to use.1Insert a Type-C plug of the AC adapter into the charging jack on the back of the desktop holder.2Unfold the power plug of the AC adapter and insert it into a power outlet. Then place the terminal on the desktop holder.・A sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.50).Charging with desktop holder
39Before Using the Terminal3When charging is complete, holding the desktop holder, lift the terminal up to remove. 4Remove the power plug of AC adapter from the outlet, and then remove the Type-C plug from the desktop holder.❖Note・Connect the terminal correctly. Wrong connection may cause damage.・A terminal mounted on the desktop holder may be damaged if pressed hard against the holder.Attaching/Removing the attachment■ Attaching1Check the shape of front/back of the attachment and the attaching part of the desktop holder, then fit the attachment with the desktop holder.2Firmly press the attachment straight into the desktop holder and make sure that there are no gaps between the attachment and the desktop holder.■ Removing1Hold the desktop holder and remove the attachment lifting up the both ends.
40Before Using the TerminalWhen using AC Adapter 06 (optional) for charging, do the following procedures.1Insert the Type-C plug of the AC adapter horizontally into the USB Type-C jack of the terminal.2Unfold the power plug of the AC adapter and insert it into an outlet.・A sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.50).3When charging is complete, remove the power plug of the AC adapter, and then remove the Type-C plug horizontally from the terminal.❖Note・Connect the AC adapter correctly. Wrong connection may cause damage.DC Adapter 04 (optional) is an adapter for supplying power from a car accessory socket (12V/24V).When using DC Adapter 04, microUSB conversion adapter B to C 01 (optional) is required.For details, refer to manuals of DC Adapter and microUSB conversion adapter.Charging with AC adapterCharging with DC adapter
41Before Using the TerminalWhen charging using USB cable A to C 01 (optional), do the following procedures.1Insert a Type-C plug of the USB cable A to C horizontally into the USB Type-C jack of the terminal.2Insert a USB plug of the USB cable A to C to a USB port of a PC.・A sound to indicate the start of charging is heard, and the notification LED of the terminal turns on (P.50).・If the installation screen for the terminal's driver software appears on your PC, please wait a moment for the installation to complete.・When "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL].・When the "Use USB to" confirmation screen appears, tap [CANCEL].3When charging is complete, remove the USB plug of the USB cable A to C from the USB port of PC and then remove the Type-C plug horizontally from the terminal.❖Note・Connect the USB cable A to C correctly. Wrong connection may cause damage.Charging with a PC
42Before Using the Terminal1Press and hold O for at least 1 second.・The terminal vibrates and the lock screen appears after a while.・When you first turn on the power and "ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings (P.43).2Cancel the screen lock.・Canceling the screen lock (P.43).❖Information・If the notification LED flashes red multiple times or an icon appears indicating that the battery is low when you press O with the terminal powered off, the battery is running low. Charge the terminal (P.36).・When SIM card lock (P.181) is set, enter PIN code on the PIN code entry screen (P.181).1Press and hold O for at least 1 second.2[Power off].Using a menu when pressing and holding O at least 1 secondThe following operations are available from the menu.When sleep mode is set, the screen backlight turns off so that you can avoid an incorrect action of the touch screen or the keys, and set the screen lock.1Press O.・Press O again to exit from sleep mode and turn on the screen backlight.❖Information・Also, when the screen backlight goes off after a specified time elapses, the terminal goes into sleep mode. You can change the time-out period for turning off the screen backlight (P.169).Turning power on/offTurning power onTurning power offPower offP. 4 2RestartRestarts the terminal.Emergency modeP. 4 8Take screenshotP. 4 7Setting sleep mode
43Before Using the TerminalThe lock screen appears when you turn the power on or press O to exit sleep mode.1Swipe (or flick) up/left on the lock screen.・Alternatively, touch O to cancel the screen lock.❖Information・On the lock screen, swipe (flick)   or   to use the phone or the camera.・You can change screen unlock method (P.181).・Once you register your fingerprint in the Fingerprint Manager, you can use fingerprint authentication to unlock the screen (P.182).When you first turn on the power and "ようこそ (Welcome)" is displayed, follow the onscreen instructions to make initial settings, such as individual functions and services.1[GET STARTED].・Tap [日本語 (Japanese)] to change the language.・Tap [VISUAL AIDS] to make settings related to the accessibility functions.・Follow the onscreen instructions to make the following settings.- Important information setting- Selecting the setup method- Setting the network connection- Set your Google account- Setting the unlock method with fingerprint- Setting the Google services- Setting the Google apps-Xperia™ services setting- Setting the Xperia Intelligence engine™- Home application settingCanceling the screen lockInitial settings
44Before Using the Terminal2When the initial settings screen for docomo services appears, mark "Agree to all"u[NEXT].・Follow the onscreen instructions to make the following settings.- d ACCOUNT settings- docomo cloud settings- Install all apps setting- "Anything else?" settings3When the setup completion screen appears, [FINISH].❖Information・The displayed setting items may differ depending on operation of the terminal.・Some settings can be changed later (P.71, P.159, P.181, P.182, P.186, P.187, P.190, P.191, P.193, P.194).・Make sure that the data connection is available (LTE/3G/GPRS) or the terminal is connected to a Wi-Fi network before setting up online services (P.50).・You can use the terminal without setting your Google account, however the Google services such as Gmail, Google Play, etc. are not available.Precautions on using touch screen・Touch screen is designed for being touched lightly with fingers. Do not push the touch screen hard with a finger or press sharp objects (nail, ballpoint pen, pin, etc.) against the screen.・Touching the touch screen may not work in the following cases. Note that it may cause malfunction.- Operation with tip of fingernail- Operation with foreign object on the screen- Operation with protective sheet or seal on the screen- Operation on the wet touch screen- Operation with fingers wet with sweat or water- Operation under waterOperations on the touch screen■ TapTouch an item such as icon or menu with your finger lightly and release it.・Double-tap means tapping twice quickly.■ Touch and holdTouch and hold an icon or menu item long.Basic operationsUsing the touch screen
45Before Using the Terminal■ Swipe (Flick)Touch the screen and flick up/down or left/right.■ DragTouch the screen, drag to the desired position and release the finger.■ ScrollWhen whole content cannot be displayed, flick up/down/left/right displayed content to scroll (move) the display position.■ PinchTouch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinch-out to zoom in and pinch-in to zoom out.* In this manual, each key icon operation is described with b, h, and n.Basic key icon operationbBack Go back to the previous screen. Or close a dialog box, an option menu, the Notification panel, etc.hHome Go to the Home screen.Touch and hold the icon to open the "Google" application.nTask Display thumbnails of recently used applications. You can activate or quit them here (P.70).You can use the split screen (P.70).b h n
46Before Using the TerminalYou can set the screen orientation to switch between landscape and portrait view automatically according to the terminal orientation.1From the Home screen, u[Settings]u[Display].2[When device is rotated].3[Rotate the contents of the screen].・Select "Stay in portrait view" to lock the screen in portrait orientation.❖Information・Some displayed screens are fixed in portrait orientation or landscape orientation.・Changing orientation of the terminal in nearly horizontal state against the ground does not switch to portrait view/landscape view automatically.・Even when silent mode is on, the following sounds are not muted: the shutter sound; the sounds produced when starting and ending video recording; alarms; sounds from video and music; and the sound produced when you tap   during a call.・Silent mode is canceled when you press the volume up key to increase volume or when you adjust the "Ring volume" (P.173) in "Sound" while Silent mode (Vibrate) is set.・Tap   on the volume control bar to adjust the volume for media playback and alarms. However the alarm volume set via the "Clock" application has precedence.Setting silent mode (Vibrate)1Press the volume up or down key.2Tap .・The icon in the volume control bar changes to   (white).Switching portrait or landscape view automaticallySetting silent mode
47Before Using the TerminalSetting silent mode (Mute)1Press the volume up or down key.2Tap .3Press the volume down key.・The icon in the volume control bar changes to   (gray).・Tap [END NOW] on the volume control bar to cancel silent mode (mute).・Silent mode (mute) can also be set by selecting the "Alarms only" or "Total silence" of the Do not disturb function in the Quick settings panel (P.54). Before using the Do not disturb function, tap  and set "Do not disturb" to the available quick setting tool.You can capture the currently displayed screen as a still image (Take screenshot).・For some applications, the capturing of the screenshot is not available.1On the screen to capture, press and hold O and the volume down key at the same time for at least 1 second.・The still image is saved and   appears on the status bar.❖Information・Alternatively, press and hold O for at least 1 seconduTap [Take screenshot] to capture a screenshot.・Drag the status bar downwardsuTap [Screenshot captured.] to view the captured image in the "Album", "Photos", or "Sketch" application. Also, open the notification of "Screenshot captured" (P.53) and tap [SHARE] to send the image or tap [DELETE] to delete the image.Capturing the displayed screen
48Before Using the TerminalIn case of emergency such as disaster, restrict functions to save the battery power.1Press and hold O for at least 1 second.2[Emergency mode]uConfirm "IMPORTANT INFORMATION"uMark "I have read the important information"u[TURN ON].・All running applications end and the terminal restarts.❖Information・To cancel emergency mode, press and hold O for at least 1 seconduTap [Emergency mode]u[TURN OFF], or drag the status bar downuTap [Emergency mode is on]u[TURN OFF]. Emergency mode is canceled and the terminal restarts.・For details on available applications in emergency mode, from the Home screen, u[Settings]u[Battery]u[Emergency mode]u[IMPORTANT INFORMATION]uTap [Available apps] to see the information.・If you set/cancel the emergency mode, you may need to reconfigure widgets etc. on the Home screen.If you have more than one application available when sending an email or displaying an image, an application selection screen appears.<Example> Selecting an application to send an email from the phonebook1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabuSelect a contact.2Select an email address.・An application selection screen appears.3Select an applicationu[JUST ONCE]/[ALWAYS].・Select "JUST ONCE" to view available applications each time, or "ALWAYS" to use the same application all the time. If you select "ALWAYS", an application selection screen does not appear the next time you perform the same task.・If you previously selected "JUST ONCE" for an application, then a screen with that application selected appears when you perform the same task. Select another application in the "Use a different app" area as needed.Setting Emergency mode Selecting an application to use
49Before Using the Terminal❖Information・Some tasks may require you to select an application each time, with "JUST ONCE" or "ALWAYS" not displayed on an application selection screen.・To deselect the application set to "ALWAYS", from the Home screen, u[Settings]u[Apps]uTap the application you want to deselectu[Open by default]u[CLEAR DEFAULTS].The first time you launch an application or function that accesses other functions and information on your terminal, the confirmation screens requesting permissions of the access rights appear.When you approve these access rights, the corresponding functions and information become available to the application/function.<Example> If launching the "Music" application for the first time1From the Home screen, u[Music].・A confirmation screen appears.・When a screen that describes the permissions appears, follow the onscreen instructions.2[DENY]/[ALLOW].・Depending on the application/function, multiple confirmation screens may appear or the display may be different. Check the displayed contents carefully and follow the onscreen instructions.❖Information・If the permission is not granted, some applications/functions may not work, or use of the functions may be limited.・To change the permissions, from the Home screen, u[Settings]u[Apps]uTap the application whose permissions you want to changeu[Permissions]uTap   /   for the item you want to change.Setting an application's permissions
50Before Using the TerminalNotification LED provides information on the terminal status, incoming calls, mail reception, etc.* The screen backlight blinks when the backlight is off.❖Information・If the notification LED flashes multiple times when you press O with the terminal powered off, the battery is running low.・When charging starts with the power off, notification LED turns on in red first.A status bar appears at the top of the screen. In the status bar, the terminal status and notification are displayed. Notification icons appear on the left side, and status icons appear on the right side of the status bar.The main status icons displayed on the status bar are as follows.Notification LEDLED status IndicationRedIndicate that the battery level is 14% or less while the battery is being chargedOrangeIndicate that the battery level is 15% - 89% while the battery is being chargedGreenIndicate that the battery level is 90% or more while the battery is being chargedFlashing redIndicate that the battery level is 14% or lessFlashing white*Indicate missed calls, new messages (SMS), or new Gmails existStatus barStatus iconSignal strength―International roaming enabled―Out of service―HSPA available―Communicating in HSPA―3G available―Communicating with 3G―4G (LTE) available*1―Communicating with 4G (LTE)*1―Connected to Wi-Fi P.159Communicating in Wi-Fi P.159Status barNotication icon Status icon
51Before Using the Terminal*1  is always displayed when the terminal is connected with LTE.*2 Can be set with the quick setting tool in the Quick settings panel (P.54). Before using, tap   and set "Do not disturb" to the available quick setting tool.❖Information・You can select icons to be displayed in the status bar in "System icons" (P.169).The main notification icons displayed on the status bar are as follows.Connected to a Wi-Fi network with no access to the Internet. The Wi-Fi signal is poor.P. 1 5 9Portable hotspot (Wi-Fi tethering) ON P.164Bluetooth function ON P.197Connected to Bluetooth device P.198Airplane mode activated P.163Silent mode (Vibrate) ON P.46Silent mode (mute) is set/Do not disturb function*2 is set to [Alarms only] or [Total silence]P. 4 7Speakerphone ON P.93Microphone put on mute P.93Alarm is set P.153NFC Reader/Writer, P2P function ON P.200Positioning with GPS―Connected to VPN P.166Data Saver is set P.162Battery status―The battery is charging P.36Battery is low―Charging is required―docomo nano UIM card is not insertedP. 3 1Notification iconNew email message P.111New Gmail message―New message (SMS) P.108New Area Mail P.115Screenshot saved P.47Receiving/downloading data―Sending/uploading data―Notification of data reception etc. via Bluetooth communicationP. 1 9 9microSD card is detected/currently mountedP. 3 5Update notification―Installation completed P.121Application update notification―Software update notification P.226NFC / Osaifu-Keitai lock set on the terminal and docomo nano UIM cardP. 1 2 4NFC / Osaifu-Keitai lock set on the terminal or docomo nano UIM cardP. 1 2 4Omakase Lock set on the terminal and docomo nano UIM card―Omakase Lock set on the terminal or docomo nano UIM card―
52Before Using the Terminal*1 Appears when switched to the Home screen etc.*2 Appeared while using a speakerphone or earphones with Do not disturb function is enabled.*3 Can be set with the quick setting tool in the Quick settings panel (P.54). Before using, tap   and set "Do not disturb" to the available quick setting tool.Call is incoming/dialing/during a call―Call is on hold P.94Missed call P.96Message is recorded in Answering MachineP.91, P.96New voice mail―Event notification for Schedule P.152Stopwatch is running/Timer is in use P.153, P. 1 5 4Alarm is in snooze mode or sounding P.153Playing a track with Media Player P.147Playing a truck in Music―Watching TV*1/Notification of reserved watchingP. 1 2 9Recording TV*1/Notification of reserved recordingP. 1 3 2USB device is connected P.176Screen mirroring connected P.163Mobile data communication invalid P.162Wi-Fi open network available P.160The terminal set as media server/connection request notification receivedP. 2 0 3STAMINA® mode ON P.177Charging with Battery Care P.37Battery is low (15% or less)―Error message/caution message―Problem with sync―Some notifications are hidden―USB tethering ON P.164Bluetooth tethering is ON and Bluetooth device is connectedP. 1 6 52 or more tethering functions ON―AUTO-GPS is set P.186Omakase Lock is set―Silent mode (mute) is set/Calling*2/Do not disturb function*3 is set to "Alarms only" or "Priority only"P. 4 7Do not disturb function*3 is set to "Total silence"―Backing up/Restoring with docomo Data Copy/Periodical backing up is completeP. 1 5 4Available internal storage is getting low―Notification of data transfer to microSD card exists (decrease of available internal storage)―Authentication failed when you set up your d ACCOUNTP. 1 8 6
53Before Using the TerminalWhen notification icons appear on the status bar, you can open the Notification panel to check the notifications, activate corresponding application, etc.1Drag the status bar downwards.aSettings・Display the Settings menu (P.158).bOpen the Quick settings panel・Open the Quick settings panel (P.54).cQuick setting tools・A part of the quick setting tools (P.54) are displayed.・Tap to set ON/OFF of the function.dNotifications・Flick left or right the notification to clear from the list. However, some notifications may not be cleared.・To change the notification setting, drag the notification left or right and tap the displayed  , or touch and hold the notification.eOpen/Close the notification・Open the notification to fully display the content or operation menu.・If the icon may not be displayed, the notification may be opened by dragging the notification down or pinching (P.45) on the notification.・Some notifications may not be displayed or opened by tapping.fOperation menu・The operation menu such as "CALL BACK" or "DELETE" may be displayed when it is opened.・For some notifications, replying the message (SMS) from the Notification panel by tapping the item of the operation menu may be available.gClear・Clear contents on the Notification panel. Some notifications may not be cleared.❖Information・To close the Notification panel, tap b or drag the panel up.・Even when the notification icon is not displayed on the status bar, the notification indicating the terminal status may be displayed.・You can also swipe (or flick) down the screen on the lock screen to display the Notification panel and check the notifications (You do not need to operate the terminal to see new notifications or a part of notifications that are received after the lock screen is set). You can set to hide notifications on the lock screen (P.171) or to show them all the time (P.171).Notification paneldcfgeba
54Before Using the TerminalYou can open the quick settings panel to enable or disable functions.1Drag the status bar downwards with two fingers.aName of network operatorbUsers・Add or switch a guest/user who use the terminal, or delete a guest.・Tap [MORE SETTINGS] to display "Users" in the Settings menu (P.185).cEDIT・Display the edit screen to add, delete or rearrange the quick setting tools.・When the icon indicating the number of pages and the current page appears below the quick setting tools, flick the quick setting tools left or right to switch the page.・In the edit screen, u[Reset] to restore to the default.dSettings・Display the Settings menu (P.158).eClose the Quick settings panel・Close the Quick settings panel and display the Notification panel.fQuick settings* In the Quick settings panel, the remaining battery and remaining standby time (estimate) are displayed.Quick settings panelfa decbBrightness levelAdjust the screen brightness.Wi-FiSet ON/OFF of Wi-Fi function, or scan Wi-Fi networks and connect a Wi-Fi network.BluetoothSet ON/OFF of Bluetooth function, or scan the paired Bluetooth devices to connect.Auto-rotateSet whether to switch portrait/landscape view automatically according to the terminal orientation.SoundEnable sound, silent mode (Vibrate), or silent mode (Mute).LocationEnable/disable location information.FlashlightSet ON/OFF of the flash/photo light.Airplane modeEnable/disable Airplane mode.Battery*Set ON/OFF of STAMINA mode.Glove modeEnable/disable Glove mode.
55Before Using the Terminal❖Information・Touch and hold the quick setting tool to display each setting screen.・The quick setting tool may be automatically added depending on the operation of the terminal.・You can also open the Quick settings panel by dragging down the Notification panel or dragging down the status bar on the lock screen.・To close the Quick settings panel, tap b or drag the panel up.You can switch the Home screen of the terminal to "docomo LIVE UX", "Xperia™ Home" or "Simple Home".・"docomo LIVE UX" (P.80)・"Simple Home" (P.59)・Switching home applications (P.71)This section describes the Home screen displayed when the home application is set to "Xperia™ Home".aWidget : Google SearchbWidget : ClockcMachi-charadWidget : Introduction to Xperia™eCurrent page・Display the number of home screens and current home screen position. Flick the Home screen left or right to switch the pages.・When "Google Now™" (P.58) is set to ON, "G" is displayed in the leftmost position.fFolder・This folder contains application icons and other items.gShortcuts (applications)hWallpaperiApps button・When you tap, if a confirmation screen regarding data collection that aids the provision of recommended app information is displayed, follow the onscreen instructions.Home screenXperia™ Home screenabcdegighf©NTT DOCOMO"ひつじのしつじくん®(Butler Sheep)"
56Before Using the Terminal❖Information・You can add widgets and shortcuts, change the wallpaper, and perform other tasks by touching and holding an area of the Home screen where no icons are displayed or by pinching in on the Home screen.・To change the page of the start screen for operations, display the page you want to change to and touch and hold the area of the Home screen where no icons are displayeduTap   displayed in the upper left of screen. However, when "Google Now™" (P.58) is set to ON, a start screen cannot be changed.・If you swipe (flick) down on an area of the Home screen where no icons are displayed, the applications search screen appears.Adding a home screenUp to 20 pages can be added.1Touch and hold an area of the Home screen where no icons are displayed.2Flick left or right on the Home screenuTap .❖Information・To return to the Home screen, tap h or b, or tap any home screen.・To delete a home screen, switch to the home screen and then touch and hold the area of the home screen where no icons are displayeduTap  displayed in the upper right of screen.・When "Google Now™" (P.58) is set to ON, up to 20 pages and Google Now screen can be added. However, new pages cannot be located at the left of Google Now screen.Adding a widget to the Home screenWidget is an application which can be added to the Home screen to use. Use a widget to start an application easily.1Touch and hold an area of the Home screen where no icons are displayed.2[Widgets]uSelect the widget.・If a settings screen etc. appears, follow the onscreen instructions.❖Information・To return to the Home screen, tap h, or tap any home screen.・If a frame is displayed around the added widget, you can drag the frame to resize the widget.・To remove a widget, on the Home screen, touch and hold the widgetuDrag it to "Remove from home screen" which appears at the top of the screen.
57Before Using the TerminalAdding a shortcut to the Home screenYou can add shortcuts of contact, etc. to the Home screen.1Touch and hold an area of the Home screen where no icons are displayed.2[Widgets]u[Shortcuts].3Select the shortcut.・When a data selection screen or setting screen appears, follow the onscreen instructions.❖Information・To return to the Home screen, tap h, or tap any home screen.・To remove a shortcut, on the Home screen, touch and hold the shortcutuDrag it to "Remove from home screen" which appears at the top of the screen.Adding folders on the Home screenYou can put shortcuts, etc. added to the Home screen into a folder to manage them.1From the Home screen, touch and hold an iconuDrag it over another icon.❖Information・To move an icon into a folder, touch and hold the icon on the Home screenuDrag it over the folder.・To change a folder name, tap a folderuTap the folder nameuEnter a folder nameuTap [DONE].・To delete a folder, touch and hold the folder on the Home screenuDrag it to "Remove from home screen" which appears at the top of the screenuTap [DELETE]. Shortcuts, etc. in the folder are also deleted.Changing wallpaperYou can change the wallpaper of the Home screen and the lock screen.1Touch and hold an area of the Home screen where no icons are displayed.2[Wallpapers].3Tap [Album]/[Live Wallpapers]/[Photos]/your desired image.・If you tap any of [Album], [Live Wallpapers], or [Photos], select an image and follow the onscreen instructions to set the wallpaper.❖Information・To return to the Home screen, tap h, or tap any home screen.
58Before Using the TerminalChanging themeYou can change themes for the Home screen, wallpaper of the lock screen, etc.1Touch and hold an area of the Home screen where no icons are displayed.2[Themes].3Select the themeu[APPLY THEME]u[OK].❖Information・Tap [GET MORE THEMES] in Step 3 to download themes and add.Setting Home screen1Touch and hold an area of the Home screen where no icons are displayed.2[Settings].Auto rotationSet whether to switch the Home screen or application screen to portrait/landscape view automatically according to the terminal orientation when "When device is rotated" (P.46) is set to "Rotate the contents of the screen".Icon sizeSet the size of icons on the Home and application screens.Icon appearanceChange the design of the icons.Show names in dockSet whether to display the names of shortcuts and other items arranged on the dock at the bottom of the Home screen (on either side of Apps button).Automatically place icons togetherSet whether to automatically arrange shortcuts, etc. that are on the Home screen so that there are no gaps.Pane transitionSet the type of transition that occurs when you switch between panes of the Home screen.App recommendationsSet whether to show app recommendations on the applications search screen.Google Now™Set whether to add Google Now screen to the Home screen.Add icons to home screenSet whether to add a shortcut to the Home screen simply by touching and holding an icon on the application screen.Icon on home screenSet whether to permit addition of duplicative application shortcuts to the Home screen.LicenseDisplay the licenses.VersionDisplay the app versions.
59Before Using the TerminalSet Simple Home to use Home screen and the setting menu limited to basic functions.1From the Home screen, u[Settings]u[Apps].2u[Home app]u[Simple Home]u[OK].3[OK].・To set the font size to "Largest", mark "Set font size to Largest".■ Applications on the Simple Home screen* The list of applications such as "Anshin Scan", "docomo phonebook", etc. is displayed.❖Information・To change to the standard Home screen, from the Simple Home screen, tap [Settings]u[Exit Simple Home]u[OK]u[docomo LIVE UX]/[Xperia™ Home].Using speed dialsSave frequently used contacts to "Speed dial" to easily make a call or send a message.■ Saving contactsSave phone numbers and mail addresses to "Contacts" beforehand.1On the Simple Home screen, [Speed dial]u[OK].Simple Home screenMapsP. 1 5 0ChromeP. 1 1 7SettingsP. 6 0My AppsP. 6 1Tools ContactsP. 6 5CalendarP. 6 3ClockP. 1 5 3CalculatorP. 6 4GmailP. 1 1 4Play StoreP. 1 2 1dメニュー (dmenu)P. 1 2 0d POINTP. 6 5Media MusicP. 6 5AlbumP. 1 4 5VideoP. 6 5TVP. 1 2 7YouTubeP. 6 7CameraP. 1 3 3docomo mailP. 1 0 7MessagingP. 1 0 7DialP. 6 3Apps*―Speed dialP. 5 9
60Before Using the Terminal2Select a contact to save.・The name "Speed dial" on the Simple Home screen will change to the name saved in the "Contacts" application.■ Making a call1On the Simple Home screen, select a speed dialu[Call].・Operation during a call (P.93)■ Sending messages (SMS)/mail1On the Simple Home screen, select a speed dialu[Send message]/[Send email].・How to send a message (SMS) (P.107)・How to send email (P.111)・How to send Gmail (P.114)❖Information・To change/delete/edit contacts saved in the speed dials, from the Simple home screen, select a contact saved in the speed dialu[MENU]uTap any of [Edit entry]/[Delete entry]/[Edit contact].Using Settings1On the Simple Home screen, [Settings].My profileCheck your own phone number and mail address, etc.Display WallpaperSet the wallpaper for the Simple Home screen or the lock screen.ThemesSet the theme for the wallpaper of Simple Home screen or the lock screen, or download themes.BrightnessAdjust the screen brightness.Auto-rotate screenSet whether to switch portrait/landscape view automatically according to the terminal orientation.Font sizeSet font size for the "Contacts" application, etc.SleepSelect a time duration before the screen back light turns off.Screen lockSet screen unlock method.
61Before Using the TerminalSaving applications in My AppsIf frequently used applications, etc. are saved in the "My Apps" folder, the applications can easily be activated.1On the Simple Home screen, [My Apps]u[EDIT]u[OK].2Mark applications to saveu[DONE].❖Information・To delete applications saved in the "My Apps" folder, in Step 2, unmark applicationsuTap [DONE].Changing applications on the Simple Home screen1On the Simple Home screen, [Settings]u[Customize Home].2[Change apps]/[Reorder apps].3Select the applicationuSelect the application to display/select the location to move to.・Grayout applications cannot be changed.4[OK].❖Information・In Step 2, tap [Reset]u[OK] to restore the defaults. Note that contacts saved in the speed dials and applications saved in "My Apps" folder are not restored.Sound Silent/Vibrate modeSet silent mode.RingtoneSet ringtone.Vibrate on touchSet whether to vibrate the terminal for some operations such as specified software key operation.Touch soundsSet whether to emit sound when selecting menu.Vibrate when ringingSet whether to vibrate the terminal when receiving a call.Customize HomeChange appsP. 6 1Reorder appsResetMore settingsDisplay Settings menu on the standard Home screen (P.158).Exit Simple HomeChange to the standard Home screen.
62Before Using the TerminalThis section describes the application screen displayed when the home application is set to "Xperia™ Home".・Switching Home application (P.71)1From the Home screen, tap  .aApplication search bar・Tap to display the application search screen and search for applications.・The application search screen can also be accessed by flicking to the right on the first page of the Application screen.bApplication icon list・Some application icons are displayed with a number of missed calls, unread mails, etc.cCurrent displayed position・Display the number of pages and current screen position. Flick the application screen left or right to switch sheets.・The leftmost sheet is the application search screen.dOption menu・This menu allows you to rearrange application icons and manage applications (for example, by moving or uninstalling) and to set the Home screen (P.58).eMachi-charaApplications displayed on the application screen are as follows.・For usage of some applications, separate subscription (Charged) is required.・For some applications, you can check functions or operation steps from the help. AlbumPlay still pictures or videos.→P. 1 4 5 Anshin Scan*1An application that allows you to use your smartphone with peace of mind. It detects viruses, helps you understand which applications use your personal data, and alerts you if you are attempting to access potentially dangerous websites.Xperia™ Application screencab©NTT DOCOMO"ひつじのしつじくん®(Butler Sheep)"edApplication list
63Before Using the Terminal 遠隔サポート (Enkaku support)An application for using "あんしん遠隔サポート (Anshin Enkaku Support)". "あんしん遠隔サポート (Anshin Enkaku Support)" is a service that allows staff of the Call center to support the terminal operations by remote-checking the display of your terminal.→P.221  Osaifu-Keitai*2Use Osaifu-Keitai services.→P. 1 2 2 おすすめアプリ (Recommended apps)*1An application that allows you to check information on app recommendations provided by DOCOMO, based on your application usage condition, and to install those applications.  Voice Search*3Use Google Voice Search.→P. 7 2 CameraShoot photos or videos.→P. 1 3 3 CalendarRegister and manage your plans and reminders etc. Disaster kit*1An application for using Disaster Message Board, Disaster Voice Messaging Service and Early Warning "Area Mail" (P.115). しゃべってコンシェル (Shabette concier)*1Just speak to your "concierge", and he or she will understand what you want to do. You can easily check the weather or transfer information, make phone calls, set an alarm, or perform other tasks. You can also enjoy chatting with various characters. Schedule*4An application for creating/managing schedule whose data is shared with Memo application. It supports i-concier service.→P.152 Sketch*2An application that allows you to create drawings or illustrations by touching the screen or to import photos and modify them. Also, publish created sketches or share the sketches. Sheets*3Create, edit and share spreadsheets, as well as view, edit and save Excel files. Slides*3Create, edit and share slide show presentations, as well as view, edit and save PowerPoint files. SettingsConfigure settings for the terminal.→P.158 DialOpen the Xperia™ phone application to make/receive calls.
64Before Using the Terminal Data CopyAn application that allows you to transfer data when changing the model, back up to/restore from a "microSD card" or the "Data Storage BOX (Cloud)).→P. 1 5 4 データ保管BOX (Data Storage BOX)*4An application for using Data Storage BOX. Data Storage BOX is a service which allows you to upload files to easily manage them in the cloud. TVWatch TV programs.→P. 1 2 7 電子書籍 Reader by Sony (e-books Reader by Sony)*5Purchase books or other content at the "Reader Store", Sony's eBooks store. Calculator*2Perform basic arithmetic operations and other various calculations. Phone*1An application for using phone features and configuring call settings.→P. 8 8 Docs*3Create, edit and share documents, as well as view, edit and save Word files. ClockUse alarm, world clock, stop watch and timer.→P. 1 5 3 docomo phonebook*4A phonebook application provided by DOCOMO. It allows you to manage your docomo account's phonebook data in the cloud.→P. 1 0 2 docomo mail*4Send/receive mails using DOCOMO mail address (@docomo.ne.jp).Your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers.→P. 1 0 7 Drive*3View/manage/share files stored in Google Drive. Instruction ManualDisplay the terminal instruction manual. You can directly start a function you want to use from the explanation (in Japanese only).* See "About manuals of SO-02K" in "Introduction". ToruCa*1An application for collecting saving coupons/convenient information from your favorite shops.→P.126 News*5Read a collection of the latest news and topics of interest.
65Before Using the Terminal Hanashite Hon'yaku *1An application for translating spoken words into the listener's native language. This allows you to enjoy talking with people who speak languages other than your own. VideoDownloads the "Video & TV SideView" application. After installation and when selected, the "Video & TV SideView" application launches and allows you to play videos saved to internal storage or a microSD memory card. In addition, view the TV program guide or use your terminal as a remote for Sony televisions or other devices. File manager*2Search for still pictures, videos, music files, downloaded files, and so on.→P. 1 9 5 Photos*3Play photos and videos. You can back them up to your Google account. フォトコレクション (Photo collection)*4A service for backing up photos or videos up to 5GB to cloud free of charge, then accessing the backup data from smartphones, tablets or PCs. My Magazine*1A search service for displaying articles in the category of your choice.→P. 8 6 Maps*3Use Google Maps services, such as viewing the current location, finding another location and searching the routes.→P. 1 5 0 マネレコ (Manereko)*1A banking app that allows you to check the balance of your bank account, details of your credit card, etc. MusicPlay music files stored on your internal storage or microSD card. MessagingSend and receive messages (SMS).→P. 1 0 7 Media Player*1Play music and videos.→P.147 Memo*4An application for creating/managing memos whose data is shared with Memo application. It supports i-concier service.  ContactsOpen the Xperia™ phonebook application to manage contact information for your friends and family. Amazon ShoppingPurchase goods from Amazon.co.jp. Amazon KindleA Kindle e-books reader app for reading books purchased on Amazon. You can also purchase e-books from Amazon using this app. ChromeBrowse web pages in Chrome.→P. 1 1 7 d POINTAn application that allows you to check, accumulate, and use your d POINT.
66Before Using the Terminal dmarketdmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other e-commerce sites.→P. 1 2 0 dメニュー (dmenu)An application shortcut for "dmenu". In dmenu, you can easily access sites recommended by docomo, as well as convenient applications.→P. 1 2 0 Duo*3An application that allows you to make video calls. Email*2Send and receive emails. Multiple accounts are available.→P.110 Facebook*6Facebook allows you to build closer relationships with your friends, family, colleagues, or classmates and to know what is going on in the world.  Gmail*3You can use the email services provided by Google and major Internet service providers.→P. 1 1 4 Google*3Search information in the terminal and web pages by keywords.→P. 7 2 iコンシェル (i-concier)*1i-concier is a service that turns your smartphone into your "butler" or "concierge" to help you in your daily life.It provides you with timely and useful information that fits your schedule, local area, and current location. For example, you can obtain information about rain forecasts (with alarms), train timetables, and tourist spots. iDアプリ (iD application)An application for using "iD", electronic money offered by DOCOMO. Once you have set up "iD" on your Osaifu-Keitai, you can hover the terminal over an IC card reader at various shops to make your shopping easier and more comfortable.→P. 1 2 5 InstagramFreely edit the photos and videos taken with your terminal and share them easily with people around the world.  LAWSONAn official application from LAWSON. You can display your digital membership card on the phone, search for LAWSON stores, and find money-saving trial coupons. Lifelog*5Keep track of your daily activities, including your number of steps and calorie consumption. This application also records your actions on the terminal, such as shooting photos and videos and listening to music.
67Before Using the Terminal McDonald'sAn official application from McDonald's. Get the latest information and obtain coupons that can be used in stores. Messenger*6Send messages or make calls or video calls to the contact of the mobile phone or the friend/group of Facebook.  Movie CreatorAutomatically creates highlight movies from the pictures and videos you have taken. Select pictures and videos to manually create a highlight movie. Save highlight movies as video files to share them to other people. Play StoreDownload or purchase various applications etc. from Google Play.→P.121 Play Movies & TV*3Rent or purchase movies, etc. from Google Play. Play Music*3With Music, you can play, store, and share music. PlayStationConnect your terminal to a PlayStation™, and the terminal will work as a controller. TwitterOfficial Twitter client application. Post a short message on the website and communicate with someone else. What's New*5Check the latest information of music, videos and applications. Xperia™ Lounge Japan*5An application that provides information about products and campaigns from Sony Mobile Communications, Inc. YouTube*3Play YouTube videos.*1 Stored in the "ドコモのおすすめ (DOCOMO's recommendations)" folder.*2 Stored in the "ツール (Tools)" folder.*3 Stored in the "Google" folder.*4 Stored in the "ドコモクラウド (docomo cloud)" folder.*5 Stored in the "Sony" folder.*6 Stored in the "Facebook" folder.❖Information・Some pre-installed applications can be uninstalled. Even if uninstalled, some applications can be downloaded from "Play Store" (P.121) etc. again.・Some applications require downloading and installation. If downloading an application is not available, set to allow to download (P.178).・Having multiple applications running can consume more battery power, resulting in fewer hours of use. For this reason, it is recommended to quit applications that you are not using. To quit an application, nuFlick left or right on its thumbnail.
68Before Using the TerminalAdd shortcuts of application to the Home screen.1On the application screen, touch and hold the icon to add to the Home screen.・For the application icons in a folder, drag out from the folder.・Touch and hold the folder to add the folder containing the application shortcuts to the Home screen.2Drag it to "Add to home screen" displayed at the top of the screen.・When the Home screen is displayed, drag it to a position to locate the shortcut.❖Information・When "Add icons to home screen" (P.58) is set to ON, you can add application shortcuts to the Home screen just by touching and holding application icon you want to add in Step 1.・When "Icon on home screen" (P.58) is set to ON, previously added shortcut will be deleted automatically if application shortcut added to the Home screen is duplicated.・Before uninstalling application, back up contents related to the application that you want to save including data saved in the application.・Some applications may not be uninstalled.1Touch and hold an area of the application screen where no icons are displayed.・Tap the folder to uninstall the application contained to the folder.2Tap an application icon with  .3[OK].・When uninstalling application is unavailable, "DISABLE" is displayed to disable the application (P.175).❖Information・Alternatively, pinch-in on the application screen to operate.Adding an application to the Home screenUninstalling an application
69Before Using the TerminalWhen the order of application icons is set to "Own order" in the option menu (P.62), you can manage your application icons on the application screen by putting them in folders.1On the application screen, touch and hold an application iconuDrag it over another one.❖Information・To move an icon to a folder, on the application screen, touch and hold the iconuDrag it over a folder.・To take out an application icon from a folder, tap the folderuTouch and hold the application iconuDrag it to a place you want to locate.・To change a folder name, tap a folderuTap the folder nameuEnter a folder nameuTap [DONE].When the order of application icons is set to "Own order" in the option menu (P.62), you can rearrange your application icons as you like.1On the application screen, touch and hold an iconuDrag it to any position you like.❖Information・To add a new page of the application screen, while rearranging the application icons, drag the icon to the right end of the rightmost page.・Automatically sort the icons by selecting the order "Most used", "By name", or "By date" in the option menu (P.62).Adding a folder to the application screenRearranging application icons
70Before Using the TerminalDisplay recently used applications as thumbnails to confirm, open, switch between, or close them.1n.・Applications are displayed as thumbnails.❖Information・Tap a thumbnail to open or switch the application. Although, depending on the displayed thumbnails, the application may not accessible.・To delete the application thumbnail, flick the thumbnail left or right or tap [×] displayed at the upper right of the thumbnail. To clear all thumbnails, tap [CLEAR ALL] displayed at the upper right of the screen.・Clearing the thumbnail of an application closes the application.・If "Screen pinning" (P.178) is turned on, you will see  on the thumbnail of your most recently opened application. You can tap it to pin the screen. If a screen is pinned, you cannot use the applications other than displayed one. To cancel pinning, follow the onscreen instructions.Split the screen in up and down to display and operate two applications.・Activate the application to display beforehand.・If the application does not support the split screen, it cannot be displayed with this function.1n.・Applications are displayed as thumbnails.2Touch and hold the application thumbnail to displayuDrag to the "Drag here to use split screen" appeared at the top of screen.・When "App doesn't support split screen" appears at the top of the screen, the application cannot be displayed in the split screen.3Tap the application thumbnail to display from the lower part of the screen.・If the application thumbnail is not displayed, tap h to activate the application to display.Task manager Split screen
71Before Using the Terminal❖Information・The application windows in the split screen can be displayed up and down in the portrait view and left and right in the landscape view.・The application window displayed in the lower part (right part for the landscape view) can be switched. To switch the application window, tap   and select the application thumbnail, or tap h to activate the application.・In portrait view, drag   of the split line displayed in the center of the split screen up or down to change the range of the application window.・To end the split screen, drag   to the upper or lower of the screen (left end or right end for the landscape view), or touch and hold  .・When   is displayed at the bottom of the screen, the split screen is still functioning. When the application window is displayed in full screen, tap  to return to the split screen.You can switch the Home application of the terminal to "docomo LIVE UX", "Xperia™ Home" or "Simple Home".1From the Home screen, u[Settings]u[Apps].2u[Home app].3Tap [docomo LIVE UX]/[Xperia™ Home]/[Simple Home]u[OK].・If you tap "Simple Home", see how it looks and tap [OK].・A home application, lock screen, phonebook application, and music and video player applications are set all at once for "docomo" or "Xperia™".❖Information・When the home application is switched, widgets or shortcuts on the screen may not be displayed correctly depending on home screen layout etc.・To set a home application, lock screen, phonebook application, and music and video player applications individually, from the Home screen, tap u[Settings]u[Apps]uu[Preferred apps settings].Switching Home application
72Before Using the TerminalEnter a word in the search box to browse the information in the terminal or on the Internet.1From the Home screen, tap the Google search widget.・When the screen that explains the feed appears, follow the onscreen instructions.2Enter a search word.・Character entry (P.73)・The search candidate list appears.3Tap the search suggestion or   on the software keyboard.❖Information・Alternatively, from the Home screen, tap [Google]u[Google] to open the "Google" application.・When applications appear in Step 2, select an application to activate.・When   is displayed in the search result screen etc., tap u[Settings] to make settings for the search function.Using Google Voice SearchEnter a search word by voice.1From the Home screen, tap   on the Google Search widget.2Speak a search word to the microphone.❖Information・Alternatively, from the Home screen, tap u[Voice Search] to activate the "Voice Search" application.Searching information in the terminal and web pages
73Before Using the TerminalEnter characters using the software keyboard (keyboard on the screen) which appears when you tap the character input box in a mail, phonebook, etc.❖Information・To hide software keyboard, tap   displayed at the lower left of the screen.・A magnifier appears when you touch and hold a text, and you can enlarge the text.Character input method for the terminal is set to "Xperia™ Japanese keyboard" by default when the language is set to 日本語 (Japanese). Details on using Xperia Japanese keyboard are explained in "POBox Plus 使い方ガイド (Online help)".1From the character entry screen, tap   in the quick tool bar.・Details of the quick tool bar (P.75)2[Online help].Switch the software keyboard to use for entering characters.1While entering characters, tap   at the bottom of the screen.・The screen for changing the software keyboard appears.2Select the software keyboard.❖Information・When the language is set to English, the default keyboard is set to "SwiftKey Keyboard". To use the Japanese keyboard, tap [Xperia™ Japanese keyboard] in Step 2. In this manual, explanations are given only for "Xperia™ Japanese keyboard".・If the software keyboard you want use is not displayed on the screen for changing the software keyboard, from the Home screen, u[Settings]u[Languages & input]u[On-screen keyboard]u[Manage keyboards]uTap   of the keyboard.Character entryPOBox Plus 日本語入力 使い方ガイド (Xperia™ Japanese keyboard Online help)Selecting the software keyboard
74Before Using the TerminalFor Xperia™ Japanese keyboard, the following software keyboard can be used.・Character input method (P.75)❖Information・Besides using the software keyboards, handwriting input and voice input are available for entering characters.Display the tool list to switch between software keyboard and handwriting/voice input, use plug-in applications (extensions), or change the settings.1From the character entry screen, tap   in the quick tool bar.・Details of the quick tool bar (P.75)Software keyboardKeypadKeyboard with the same key arrangement as a mobile phone. Repeatedly tap a key to select a character (multi-tap input). Flick input is also available.QWERTYKeyboard with characters allocated in the same arrangement as general PCs. Enter Japanese in Roman character. Flick input is also available.Switching software keyboard or changing the settingsKeyboard layoutSet software keyboard (Keypad or QWERTY) for each character mode.Switch to QWERTY/Switch to keypadSwitch to QWERTY/keypad.One-handed keyboardChange the keyboard size for one-handed operation.My WordsP. 7 8SettingsChange Xperia™ Japanese keyboard settings.Keyboard skinsChange software keyboard skin.Online helpP. 7 3For beginnersSelect "Online help" to display "POBox Plus 日本語入力 使い方ガイド (Online help for Xperia™ Japanese keyboard)" (Japanese) (P.73).Select "Simple keyboard" to change to the software keyboard with bigger texts and simple design.Select "Reset" to restore the settings and design of the software keyboard to their factory defaults.HandwritingSwitch to handwriting input.docomo voice inputSwitch to docomo voice input.Google voice typingSwitch to Google voice typing.DownloadDownload plug-in applications (extensions) from website.Contact Picker 2.3P. 7 8
75Before Using the TerminalWhen you tap a key on the software keyboard, candidates list for the entered characters appears. Tap a word to enter from the candidate list, text can be input one after another.aQuick tool barDisplay shortcuts of frequently-used functions. Tap  to display the tool list (P.74).If the quick tool bar is not displayed, tap   (when  is not displayed, tap   /   to switch the character mode to "Kana").bShow/hide the quick tool bar.When entering on the keypad, characters assigned to a key appear in reverse order. / Appears when entering numbers, tap to switch one-byte/two-byte character. /   / When entering alphabet letters on QWERTY, tap to switch lower case, capitalization and upper case.cMove the cursor to the left.d / Hide/show the list of symbols, facemarks, etc. /   / Appears before fixing character in Kana mode and switches among 予測 (prediction) candidate list/変換 (conversion) candidate list/英数カナ (alphanumeric/katakana) conversion candidate list.e /   / The character mode switches "Kana"→"Alphabet"→"Numeric" in order. /   /   Touch and holdDisplay the tool list (P.74).fDelete the character before the cursor.gMove the cursor to the right.When there is an unfixed character string with the cursor positioned at the right end, enter the same character as the last entered ones (Except for Handwriting input).Character input methodbcadefghiKeypadahdbecgfiQWERTYchdjgfiHandwriting input
76Before Using the TerminalhEnter spaces.In Kana mode, highlight and select word in the candidate list.iEnter a line feed.*Appears before fixing character and fixes the character.* In some screens,  ,  ,  ,  , etc. appear.jReturn to keypad/QWERTY.❖Information・To enlarge the display area, tap   in the candidate list. To display the software keyboard, tap   or .・To return to the display before conversion after the conversion is fixed, tap   displayed in つながり予測 (associative) candidate (except in handwriting input mode) etc.・Note the following when you use Handwriting input.- For voiced sound and semi voiced sound mark, enter in the right upper part of the input screen.- For punctuation mark and lower case, enter in the lower part from the center of the input screen.・For Handwriting input, the following operations are available.- Tap an icon at the upper left of entered character to display candidates for the entered character. Recognized character is displayed in light blue and characters are displayed at the bottom of candidate list in different colors by type.- Tap   at the upper right of entered character to delete the entered character.- When entering 2 or more characters and tapping the icon at the upper left,   appears. Tap   to combine entered 2 characters to 1 character. Combine characters with this operation if 1 Kanji character is recognized as 2 characters or other.Flick inputFlick up/down/left/right to enter characters in each column of kana syllabary.<Example> Entering characters in "な" columnYou can enter "な" only by tapping. Flick left for "に", up for "ぬ", right for "ね" and down for "の".
77Before Using the TerminalMulti-tap inputTap the same key continuously to enter the assigned character.To enter a character assigned to the same key, wait for changing the color of tapped key to the original (approx. 1 second), then enter the next character (for entering the next character soon, tap   to change the color of key to the original). With the key in the original color, tap   to enter the last entered character again.<Example> Entering "あお"1Tap "あ" onceuWait approximately 1 second (until the key color returns to the original).2Tap "あ" 5 times.or1Tap "あ" onceuTap (immediately).2Tap "あ" 5 times.❖Information・To switch the input method used on the keypad between "Flick input" and "Multi-tap input", tap   in the quick tool bar on the character entry screenu[Settings]u[Input style & sensitivity]u[Input style], then select your desired item.In the character entry screen, when you double-tap a character to edit, or touch and hold or double-tap a text to copy in a web page etc., the edit menu appears near the selected text. Drag   or   to change the character string to select.❖Information・To paste a copied or cut character string, touch and hold a position to insertuTap [PASTE]. When text is already entered, tap a position to insertuuTap [PASTE].・On some applications, these functions may not be available or the editing menu may appear different.Editing textCUTCut a selected character string.COPYCopy a selected character string.PASTEPaste a copied/cut character string.SHAREAttach and send the selected character string to an application.SELECT ALLSelect all text.WEB SEARCHSearch for online information related to the selected character string.Display the editing menu that could not be shown. Tap   to return to the previous editing menu.
78Before Using the TerminalIf contacts are registered to the Contacts, you can use "Contact Picker 2.3" to enter contact information when entering characters.1From the character entry screen, tap   in the quick tool bar.・Details of the quick tool bar (P.75)2[Contact Picker 2.3]uTap "CONTACTS" tab.3Select a contact to quote.4Mark items to quoteu[OK].・If the quoted information is not displayed, tap the character entry field.❖Information・The "HISTORY" tab displays your own contact information and contact information you retrieved when you entered characters previously.You can add words to My Words beforehand to have them appear as preferred candidates when entering characters.1From the character entry screen, tap   in the quick tool bar.・Details of the quick tool bar (P.75)2[My Words].3Tap .4Enter the reading into the character input box for "Reading".5Tap the character input box for "Word"uEnter the word.6[OK].❖Information・To delete registered words, in Step 3, mark words to deleteuuTap [DELETE].Quoting contacts My Words
79Before Using the TerminalFor each input method, you can make settings related to character entry or check application information.1From the Home screen, u[Settings]u[Languages & input].2[On-screen keyboard]uSelect the software keyboard.・Tap an item displayed on the screen to set.・If the introduction screen etc. appears, follow the onscreen instructions.❖Information・The items vary depending on the input method.・When entering characters with Xperia™ Japanese keyboard, on the character entry screen, tap   of the quick tool baru[Settings] to display the settings screen for Xperia™ Japanese keyboard.・If the software keyboard is not displayed, in Step 2, [On-screen keyboard]u[Manage keyboards]uTap  of the keyboard.Setting the character entry
80docomo LIVE UXdocomo LIVE UXHome screen is displayed when h is tapped. You can activate applications, widgets, etc. or display the applications screen from it.・Flick the Home screen left or right to switch the pages.aWidget : Google SearchbMachi-characApplication icondApps button・Display the application list screen (P.83).eApplication icons・This icons are always displayed even when the Home screen page is switched.fWallpapergFolder・Several application icons are stored in the folder.hCurrent position・Display the number of home screens and current home screen position.iMy Magazine button・Display My Magazine (P.86).Move application icons or add widgets or folders to the Home screen.1Touch and hold an area of the Home screen where no icons are displayed.2Tap any of [Show apps]/[Show widgets]/[Create folder].・To move/add applications or widgets, touch and hold the iconuDrag it to the Home screen display area at the bottom of the screen.❖Information・To move an application icon into a folder, touch and hold the icon on the Home screenuDrag it over the folder.・To change a folder name, tap a folderuTap the folder nameuEnter a folder nameuTap   of software keyboard.・If a frame appears when you release your finger after touching and holding a widget, drag the frame to change the display size.Home screenabcedfghi©NTT DOCOMO"ひつじのしつじくん®(Butler Sheep)"Managing the Home screenAdding/Moving applications etc. to the Home screen
81docomo LIVE UX1From the Home screen, touch and hold an icon.2Drag it anywhere.・To move to the next home screen, touch and hold the home screen and drag it to left or right.1From the Home screen, touch and hold an icon.2Drag to "Back to apps list"/"Remove from Home" displayed in the top of the screen.Uninstalling an application or widget from the Home screen・Before uninstalling application, back up contents related to the application or widget that you want to save including data saved in the application or widget.・Some applications or widgets may not be uninstalled.1From the Home screen, touch and hold an icon.2Drag to "Uninstall" displayed in the top of the screenu[OK].❖Information・You can disable some applications or widgets which cannot be uninstalled by dragging to "Disable app" displayed in the top of the screen in Step 2 (P.175).1Touch and hold an area of the Home screen where no icons are displayed.2[Change Kisekae].3Tap a Kisekae to change tou[Set].❖Information・Alternatively, from the Home screen, uu[Kisekae].・You can add Kisekae contents by tapping [Search on the web] to download from website. To delete added Kisekae contents, tap a Kisekae to delete in Step 3u[DELETE]u[Delete].Moving an icon on the Home screenDeleting an icon from the Home screenChanging Kisekae
82docomo LIVE UXYou can change wallpaper of the displayed home screen.・Display a home screen page to change in advance.1Touch and hold an area of the Home screen where no icons are displayed.2[Change wallpaper].3Tap the wallpaper to change to.・Tap [Select another wallpaper] to select from "Photos", "Images" or "Live Wallpapers".4Follow the onscreen instructions to set wallpaper.1Touch and hold an area of the Home screen where no icons are displayed.2[Machi-Chara setting].3[表示する (Show)]/[表示しない (Do not show)] of "キャラ表示 (Chara display)".・Tap the tab to make settings of 基本設定 (Basic settings)/キャラ設定 (Chara setting)/音声起動設定 (Voice activation setting) as required.❖Information・For details on Machi-chara, in Step 3, u[ヘルプ (Help)] to refer to the Help. (in Japanese only)1Touch and hold an area of the Home screen where no icons are displayed.2[Home screens].3Tap .・To delete the home screen, tap   of the home screen thumbnail.・To sort home screens, touch and hold a home screen thumbnail you want to sortuDrag it to any position.❖Information・Alternatively, pinch-in on the Home screen to display the home screen list.・Up to 7 pages can be set.・To return to the Home screen, tap h or b, or pinch-out.Changing wallpaperChanging Machi-Chara display settingAdding a home screen page
83docomo LIVE UX1From the Home screen, tap  .・Flick the Home screen downwards to display the application screen.aApps/Widgets/Wallpapers tab・Display application icons/widgets/wallpaper list.bApplication icon list・Applications on the Home screen are not displayed in the list.・Flick the list screen left or right to switch the pages.cDisplay all apps・You can search the application (P.85).dHome screen display area・Flick left or right to switch the pages.eOption menu・View optional menu such as Settings.fRecommends button・Install applications recommended by DOCOMO (P.84).gCurrent position・Display the number of list screens and current screen position. Display by application icon/widget list.❖Information・To close the application screen, tap b or h, or flick up the Home screen display area at the bottom of the screen.Moving/Adding an application or widget to the Home screen1On the application screen, touch and hold an icon to move/add to the Home screen.2Drag it to the Home screen display area at the bottom of the screen.・When the home screen is displayed, drag it anywhere.Application screenbegfcadCustomizing the application screen
84docomo LIVE UXUninstalling an application or widgetSome application icons and widgets can be uninstalled from the application screen.・Before uninstalling, see "Uninstalling an application or widget from the Home screen" (P.81).1On the application screen, touch and hold the icon of application.2Drag to "Uninstall" displayed in the top of the screenu[OK].❖Information・You can disable some applications or widgets which cannot be uninstalled by dragging to "Disable app" displayed in the top of the screen in Step 2 (P.175).Moving application in the application icon list1On the application screen, touch and hold the icon.2Drag it anywhere.Install applications recommended by DOCOMO.1On the application screen, [Recommends].・When using the service for the first time, you will see the introduction screen for Osusume App. Tap [ENABLE] to display the application list screen and enable notification of Osusume App.2Select an application.・An introduction screen for app appears.❖Information・On the application screen, uTap  /  of "Notification settings" to switch on/off of Osusume App notification.Installing "Recommends" applications
85docomo LIVE UXIt is a function to search the applications.1From the Home screen, u[Display all apps].・All applications are displayed in a list.2Tap an application.・The application activates.・To sort the applications, tap [By app name] in the upper right of the screen.・Tap   to display the screen where the application is located with the application focused.❖Information・Alternatively, from the Home screen, uu[Display all apps] to display the list of all applications.You can use docomo LIVE UX data backed up on the docomo cloud to restore the layout of applications, widgets, and other items on the Home screen. Once it is restored, a page for docomo services is added to the bottom of the Home screen.・To use the backup and restore features, you need to set up your d ACCOUNT (P.186).1On the Home screen, uu[Layout backup & Restore].2u[BACKUP].1On the Home screen, uu[Layout backup & Restore].2[Restore the latest backup data]/[Restore from backup data list].Display all apps Backing up and restoring the Home screenBacking up the Home screenRestoring the Home screen
86docomo LIVE UX3[Restore].・If you selected "Restore from backup data list", select the data you want to restoreuTap [Restore].1On the Home screen, uu[Layout backup & Restore].2Tap .My Magazine is a search service for displaying articles for categories you selected. By your tendency of read articles or profile information, the more you use, the more it comes close to your preference. Also, you can set to enable notifications of notice, or customizing of My Magazine using your docomo service subscription information etc.1From the Home screen, tap  .・When you activate the application for the first time, select categories on the selection screen and then tap [OK].・Flick the article list screen left or right to switch categories.・Tap [See more info] to show other articles in the category.2Tap an article you want to read.❖Information・Alternatively, flick the Home screen up to display the article list.・You can change the settings of My Magazine or check the help by tapping   in Step 2.Backup settingsBackup automaticallySet whether to periodically back up when the home screen information for the docomo LIVE UX is updated.Multi-Device SyncSet whether to send a notification to your other devices when an application has been installed.Sync on Wi-Fi onlySet whether to back up or sync data only when the terminal is connected via Wi-Fi.Sync while RoamingSet whether to back up or sync data during international roaming.Usage statisticsSet whether to send usage status.Delete backup dataDelete your backup information from the server.Open source licensesView open source licenses.Terms of useView the terms of use.HelpView the operation guide.AboutView the application's version and other information.Using My Magazine
87docomo LIVE UX1From the Home screen, uu[Display category setting].2Put marks to the categories.1From the Home screen, uu[My Magazine settings]u[My Magazine use setting].2[Use]/[Not use]u[OK].❖Information・You can also set by tapping   on the application screenu[My Magazine use setting].1On the application screen, u[About].❖Information・If the update of docomo LIVE UX is available, "Update now" is displayed in the application information screen. Tap it to update docomo LIVE UX.Setting a categoryChanging My Magazine use settingChecking Home application information
88PhonePhone1From the Home screen, u"Dial" tab.2Enter a phone numberuTap .・To make a video call, enter a phone numberuuTap [Video call].・Tap   to delete the number.3When the call is finished, tap  .❖Information・In Step 2, tap   without entering a phone number to enter the phone number registered as the latest call in Recent calls.・To activate Xperia™ phone application, from the Home screen, tap u[Dial].・With VoLTE, you can make high-quality voice and video calls. You can also switch between voice and video calls.To use VoLTE, both parties must meet the following requirements.- Both terminals support VoLTE- Within the area where VoLTE is available- "Preferred network type" (P.207) in "Mobile networks" is set to "4G (preferred)/3G/GSM" or "4G/3G", and "Enable VoLTE" (P.207) is ON・With VoLTE (HD+), you can make voice and video calls with sound that is much higher quality than with VoLTE.To use VoLTE (HD+), the usage requirements of VoLTE must be met, and both you and the other party must have models which support VoLTE (HD+).・On a video call, both speakers can see each other while talking.- When you make a video call, voice call and packet communication charges will apply. When you receive a video call, packet communication charges will apply.- Video calls are based on best-effort communication (which optimizes transmission speed depending on how busy your network is), so the quality of video images varies depending on your network environment.- If your terminal fails to switch to the video call during a voice call, the massage appears on the screen and the voice call continues.- Since imaging for video call varies by terminal model, your terminal and the other party's terminal may show different image in scope.Making/Receiving a callMaking a call/video call
89PhoneEmergency call❖Note・This terminal supports "Emergency call location information". If you use the terminal to place a call to emergency numbers such as 110, 119, or 118, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station.However, the Emergency call acceptance organization may not be able to figure out your exact location depending on the location where you place a call or radio wave condition. If you make a call hiding your caller ID, such as by entering a phone number with "184" for each call, your location information and phone number are not reported. However, when the Emergency call acceptance organization deems it necessary for lifesaving purposes, etc., they may decide to obtain your phone number and accurate location information from your GPS, regardless of your settings. Note that the areas/time for which the "Emergency call location information" is ready to be used vary depending on the preparatory state of each Emergency call acceptance organization.・When calling 110, 119 or 118 for emergency from the terminal, tell that you are calling from a mobile phone, and give your phone number and your current location precisely for checking callback from the police/fire department. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you.・Note that you may not connect to the local Fire Department or Police Station depending on where you are calling from.❖Information・If docomo nano UIM card is not inserted to the terminal, emergency calls (110, 119, 118) cannot be made in Japan.・You can make an emergency call by tapping [EMERGENCY CALL/INFO] on the lock screen.・If you make an emergency call with Call Blocking is ON, the setting of the Call Blocking turns off automatically. However, the Call Blocking will be set 120 minutes later again only when Block numbers is set.・Emergency calls may not be available on some networks.・The video call feature does not support emergency calls to 110, 119, and 118.Emergency call Phone numberPolice call110Fire and emergency rescue119Coast guard118
90PhoneEntering pause (,)/(;) to sendFor using services requiring entry of number during a call such as check of the balance of a bank account, reservation of tickets, etc., enter an additional number to a phone number beforehand and make a call.■ Using 2-second pause (,)Added number will automatically be sent approximately 2 seconds after a call is accepted.1From the Home screen, u"Dial" tab.2Enter a phone numberuu[Add 2–sec pause]uEnter an additional numberuTap .3When the call is finished, tap  .■ Using a wait (;)Sending is automatically on standby when the call is made and a confirmation screen asking if you send the additional number appears.1From the Home screen, u"Dial" tab.2Enter a phone numberuu[Add wait]uEnter an additional numberuTap .3On a confirmation screen, [YES].4When the call is finished, tap  .Making an international call (WORLD CALL)For details on the WORLD CALL, refer to NTT DOCOMO website.1From the Home screen, u"Dial" tab.2Dial + (touch and hold [0])uEnter Country code, Area code (City code), recipient number in the orderuTap .3When the call is finished, tap  .❖Information・If the area code begins with "0", omit "0". However, "0" may be required to dial to some countries or areas such as Italy.
91Phone・When a phone or video call comes in, the incoming call screen appears.If the screen backlight is on (except on the lock screen) or an application is running, the notification appears at the top of the screen (P.92).1On the incoming call screen, drag  (left) to   (right).・To accept a video call, drag   (left) to  (right) for "Answer video". To answer a call with voice only, drag   (left) to  (right) for "Answer voice".2When the call is finished, tap  .❖Information・When "Answer" of "Suguden setting" (P.99) is ON, an incoming call can be answered just by holding up the terminal to your ear.・When "Disconnect" of "Suguden setting" (P.99) is ON, a call can be disconnected by the motion or voice keyword during a call.Answering a video call with the camera turned offYou can answer a video call without sending your image to the other party.1On the incoming call screen, [RESPONSE OPTIONS].2[Answer without video].Answering calls with Answering MachineEven when Answering Machine is not set, you can activate Answering Machine manually.1On the incoming call screen, [RESPONSE OPTIONS].2[Reject with Answering Machine].❖Information・If there is a recorded message,   is displayed in the status bar. Drag the status bar downwardsuTap the notification of the Answering Machine to display the Messages screen and you can check the recorded messages.Receiving a phone/video call
92PhoneMuting the ringtone for an incoming call1While receiving a call, press the volume key or O.❖Information・You can stop vibration by pressing the volume key or O when silent mode (Vibrate) is set.・On the Home screen etc., press the volume key to adjust the ringtone volume.Declining a call1On the incoming call screen, drag  (right) to   (left).Rejecting an incoming call and sending a message (SMS)If you are not available to answer a phone or a video call, you can decline the call and send a message (SMS). Messages for sending are pre-registered, and you can edit them if necessary.1On the incoming call screen, [RESPONSE OPTIONS].2Tap a message to send.・Tap [Write new message] to create and send a message.❖Information・To edit/add a message beforehand, from the Home screen, tap uu[Call settings]u[Reject call with message]uSelect an existing message or blank space and edit itu[OK].Receiving a phone/video call when an application is runningIf the screen backlight is turned on (except on the lock screen) or an application is running when a call comes in, the notification appears in the upper screen.1[ANSWER].You can start a voice conversation.・To accept a video call, tap [VIDEO CALL].・To decline a call, tap [DECLINE].・Tap the upper part of displayed notification to open the incoming call screen.2When the call is finished, tap  .
93PhoneOn the Calling screen, you can set voice output or mute, or enter a phone number to make a call to another party.■ Screen displayed during a voice call■ Screen displayed during a video callWhile on a video call, you will see the other party's image in a parent window, and your image in a child window, with the control icons hidden. Tap the screen to show the control icons.aName, phone number, etc. of the other partybSound quality of VoLTE call・ (super high sound quality) is displayed during calls in VoLTE (HD+), and   (high sound quality) is displayed during calls in VoLTE (HD).cPhone number registered in the phonebook entrydPhoto/image set in the phonebook entryeMute : Turn the microphone on/off during a call.fAudio output : Turn the speakerphone on/off.・Other party's voice can be heard from the speaker and handsfree call can be made.・Video calls are made or received with the speakerphone turned on.・When the terminal is connected to a Bluetooth device, you can tap the icon to switch the audio output.gDial key : Send a push signal while on a call.hCall duration timeiEnd a calljVideo call : Switch from a voice call to a video call.・When you tap this icon, the other party will see a message asking for permission to switch to a video call. If the other party accepts it, you can switch to a video call.・If the other party has declined to switch to a video call, is outside a VoLTE service area, or is using a terminal that does not support VoLTE, a message appears indicating that the call cannot be switched. Tap [OK] to continue the voice call.・"Hold call" is displayed during a 3G voice call.Operations during a callihjkabcdfegihmnopabcfel
94PhonekMore (voice call)・Hold a call[More]uTap [Hold call]/[Resume call] to put a voice call on hold or resume the call.・To hold a call, "Call waiting" subscription is required (P.97).・Add call[More]uTap [Add call] to add a voice call.・"Add call" is displayed during a 3G voice call.・To add a call, "Call waiting" subscription is required (P.97).lSwitch camera・Tap this icon to switch between cameras for shooting your image.mChild window for a video call (your image)・ is displayed if the camera is hidden.nParent window for a video call (other party's image)・ is displayed if your terminal cannot receive the other party's image.oCamera・Select whether to send your image to the other party or hide it.pMore (video call)・Change to voice[More]uTap [Change to voice] to switch to a voice call.・DialpadOpen a dialpad while on a video call.・Switch videos[More]uTap [Switch videos] to switch the display area between the parent window (showing the other party's image) and the child window (showing your image).❖Note・Do not bring the terminal close to your ear with the speakerphone on to avoid from hearing damage.❖Information・The notification icon is displayed on the status bar while dialing, incoming, calling or holding. Even if you switch the screen to the other screen such as the Home screen, returning to the Phone application screen is available by dragging the status bar down and then tap the notification.・When you switch to the other screen such as the Home screen during a video call, the camera is turned off.Adjusting the earpiece volume1Press the volume key during a call.
95PhoneIncoming calls and outgoing calls are displayed by chronological order in the Recent calls screen.1From the Home screen, uTap "Recent calls" tab.■ Recent calls screenaPhonebook・The phonebook list screen appears.bOption menucAll tabdPhone number/name・Tap to make a voice call or video call, create an SMS message, etc.・Touch and hold to display "Edit number before call", "Delete from call log", "Register as blocked number" or "Search location".eIncoming tabfOutgoing tabgVoice call button・Tap this button to make a voice call to the corresponding phone number in the call log.hDateiHistory・The details of an incoming or outgoing calls (Outgoing, Incoming, or Missed call) are displayed.❖Information・The number of call history that can be stored depends on the amount of available memory on your terminal.Adding a number from the Recent calls to Phonebook1From the Home screen, uTap "Recent calls" tabuTap a phone numberu[Register].・Alternatively, in the Recent calls screen, touch and hold a phone numberu[Edit number before call]u[Register].2[Add new contact]/[Add to the existing contact].・When "Add to the existing contact" is selected, select a contact to save to.3On the profile edit screen, enter necessary information such as name.・To add items, tap [Add other items].4[Save].Call historyShowing call historycdabfheig
96PhoneDeleting a call history1From the Home screen, u"Recent calls" tabuTouch and hold the incoming/outgoing history to delete.2[Delete from call log]u[OK].❖Information・To delete all the call history, in the Recent calls screen, tap the "All" tabuu[Delete log]uMark "Select all"u[Delete]uTap [Delete].・Voice and video calls are not distinguished in the Recent calls.When you have missed calls,   appears in the status bar.1Drag the status bar downwards.2[Missed call].❖Information・When there is a missed call, you can make a call or send message (SMS) to the caller of the missed call from "CALL BACK"/"MESSAGE" below "Missed call" in the Notification panel.For multiple missed calls, number of calls appears below "Missed call".・A missed call notification and the number of missed calls are displayed on the lock screen. Double-tap the notification to see the Recent calls screen.When Answering Machine is set, the answering message is played when you cannot answer an incoming call and message from the caller can be recorded even if you are not subscriber of Voice Mail Service. Up to approximately 60 seconds per one can be recorded.・Answering Machine is not available for video calls.1From the Home screen, uTap .2[Call settings]u[Answering Machine].Displaying missed callsAnswering MachineAnswering MachineSet whether to use Answering Machine.Pick up afterSet a ringing time for answering.Use while roamingSet whether to use Answering Machine when you stay abroad.GreetingsSwitch the answering message language to Japanese or English.MessagesCheck recorded messages.
97Phone❖Information・If there is a recorded message,   is displayed in the status bar. Drag the status bar downwardsuTap the notification of the Answering Machine to display the Messages screen and you can check the recorded messages.・To delete recorded message, touch and hold a messageuTap [Delete]/[Delete all]u[OK].・The number of messages that can be stored depends on the amount of available memory on your terminal.You can set the network services, set call rejection, or edit Reject call with message.1From the Home screen, uTap .2[Call settings].Call settingsNetwork serviceVoicemail service*1Record caller's message when you cannot answer an incoming call.Call forwarding service*1Forward a call when you cannot answer an incoming call.Call Waiting*1Put the current call on hold and answering an incoming call or making a call to another party.Caller ID notificationNotify the display of the other party's phone of your phone number when calling.Nuisance call blocking serviceRegister phone numbers of nuisance call to reject.
98Phone*1 Not available for video calls.*2 Not displayed if a docomo nano UIM card is not inserted.Network serviceCaller ID display request serviceAnswer calls without phone number with guidance to request caller ID display.Call notificationNotify incoming calls by message (SMS) while the power is off or you are out of service area.English guidanceSwitch the voice guidance to English or Japanese.Remote operation settingsSet to operate Voice Mail Service or Call forwarding Service using land-line phone, public phone or DOCOMO mobile phone, etc.Public mode (power OFF) settingWhile the terminal is OFF or in Airplane mode, a guidance message indicating that the receiver cannot answer the call is heard on the caller's terminal and then the call ends.Roaming settingsSet to reject incoming calls overseas or use roaming guidance (P.210).Answering MachineP. 9 6Call BlockingSet whether to reject incoming calls for numbers not in the phonebook, private, from a pay phone, or unknown.You can block the calls and messages (SMS) from the registered phone number with "Block numbers".Reject call with messageEdit/set a message (SMS) to be sent when rejecting an incoming call (P.92).Sub address settingsSet whether to identify " " in phone number as a sub address separator.Prefix settingsRegister a prefix number added before phone number when making a call.Suguden settingP. 9 9Contact docomo*2Make a call to General Inquiries, inquiries for damage, theft or loss overseas or damage overseas.Calling accountsSet Internet phone (SIP) account.Extension line service settingMake settings to use the Office Link holding and forwarding line service. The Office Link is an extension line service for corporate customer.
99PhoneMake settings for "Suguden" which allows you to operate phone with the motions and the voice command.1From the Home screen, uTap .2[Call settings]u[Suguden setting].Notes on using Suguden・Suguden allows you to operate the phone by the motions of the terminal or the voice commands, but the function does not work properly in the following situations.- When using speakerphone- When using earphones or a headset- When connected to a Bluetooth device that supports calling function- When making or receiving an additional call during a call- While lying down- When you perform vigorous exercise such as running, going up and down stairs, etc.- The display is covered with a book type smartphone case etc.Suguden settingAnswerSet whether to answer calls by holding up the terminal to ear.Disconnect (Motion/Voice command)Set whether to end a call by motion or voice command. When the "Motion" is ON, a call can be disconnected by placing the terminal horizontally with the screen faced down while calling, or by shaking the terminal twice. When the "Voice command" is ON, a call can be disconnected by saying the disconnect keyword while calling and then detaching your ear from the terminal.CallSet whether to make a call to the other party that is registered in advance or saved to call history by shaking the terminal once with the Home screen displayed and then holding up to ear.Mute, RejectSet whether to reject calls by placing the terminal horizontally with the screen faced down while a call is incoming, or shaking the terminal twice. You can select from "Mute", "Reject", or "Reject and send SMS".Call rankingCheck the other party whom you called many times.Hide the name when receivingSet whether to hide the names of people registered to the phonebook when receiving their calls.Sending of use informationSet whether to send your user information to DOCOMO via Suguden.Disable Suguden during roamingSet whether to disable the settings for Suguden when you stay abroad.
100Phone・If the terminal is placed within a bag or pocket while on the incoming call screen, calls may be answered or disconnected for the rare occasion because that is recognized as motion performance.・The proximity sensor does not respond well to black objects.When answering calls, if you press the earpiece over your hair, the proximity sensor may have trouble working and may cause failure to answer the call. In this case, please press the earpiece directly to your ear.When disconnecting/rejecting a call, flipping over the terminal on a black desk, etc. may cause the operation to fail (cannot disconnect/reject). In this case, instead of placing the terminal directly on the surface, flip over the terminal about 1 cm above the desk etc. to operate (disconnect/reject).Functions of Suguden●DialingA Suguden call can be made from the Home screen or the lock screen (when "Screen lock" is set to "None" or "Swipe").●Hide the name when receivingSuguden does not support video calls, but the "Hide the name when receiving" setting is compatible with video calls.●Mute, RejectWhen "Mute, Reject" is ON, a call may be rejected if you shake the terminal strongly even just once when the call is incoming because the action is recognized as a motion performance.●Disconnect (Motion/Voice command)When "Disconnect" is ON and the disconnect operation is performed (motion /disconnect keyword), a call will be disconnected even in the following situations.・When the other party puts the call on hold・When the Answering Machine is activated (playing back the greeting/recording a message)
101Phone●Disconnect (Motion)・When disconnecting a call with Suguden motion, it may not react (disconnect) if the speed of motion for placing the terminal facing down is fast. In that case, try the motion slowly to react (disconnect).・When "Disconnect" is ON, a call may be disconnected if you shake the terminal strongly even just once during the call because the action is recognized as motion performance.●Disconnect (Voice command)・While calling with Disconnect (Voice command) ON, an application using the microphone or a voice recording application using the voice sound during a call may not be available. For using the voice recording application during a call, turn off the setting of disconnection by voice command.・When the Answering Machine is activated (playing back the greeting/recording a message), disconnection by voice command is unavailable. In the case that you answer a call while recording with the Answering Machine, disconnection by voice command is available.・For calls using "Hanashite Hon'yaku", disconnection by voice command is not available.・Although the voice command function of Suguden uses the voice recognition technology or the language processing technology, DOCOMO is not liable for any accuracy of those technologies.・The voice recognition may fail when the volume of voice is too small during a call or calling under a noisy environment, or depending on the way of utterance.●Disable Suguden during roamingSuguden is disabled automatically in overseas by default setting. To use Suguden in overseas, turn off the "Disable Suguden during roaming".
102PhoneOn the phonebook, you can enter various information for contacts, for example, phone numbers, mail addresses and various service accounts.1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]u"Contacts" tab.・The phonebook list screen appears.❖Information・To use cloud service for the phonebook, "docomo phonebook" application is needed. When you use the "docomo phonebook" for the first time (including after resetting the application) or log in to cloud from the "docomo phonebook", the "Use of Cloud" screen appears and you can start using cloud.・Cloud service for docomo phonebook is not available when user is switched to the other than the owner.・From the Home screen, uTap [Phonebook] to display the phonebook list.・Use docomo Data Copy application to back up/restore the phonebook data to/from a microSD card (P.155).・From the Home screen, uTap [Contacts] to activate Xperia™ phonebook.■ Phonebook list screenOn the phonebook list screen, you can view details of your contacts. You can add a photo or image to a phonebook entry, and display phonebook entries by group.aGroup tab・Display the phonebook group.bCloud・Log in to cloud ("Use of Cloud" screen is displayed) or log out of cloud ("Suspend sync" screen is displayed).cOption menudContacts tabeName registered in the phonebook entry・Tap to display the profile screen.fPhoto/image set in the phonebook entrygSearchhRegisteriMy profile tab・Check your own phone number.jIndex character area・Tap index character to display phonebook entries allocated to the index character.PhonebookDisplaying phonebookkdbfgeahicj
103PhonekIndex・Display the index character to search entries in the order of Japanese syllabary, alphabet, etc.Adding a new phonebook entry1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabu[Register].2On the profile edit screen, enter necessary information such as name.・To add items, tap [Add other items].3[Save].❖Information・The contacts are listed in the order of Japanese syllabary of the reading of last name or first name and alphabet of last name or first name. If the reading field is vacant, the contacts are displayed in the order of Japanese syllabary of last name or first name and alphabet of first name or last name, however last name and first name in Kanji are displayed in "他 (other)" field.・Alphabet (one-byte) last and first name are displayed in the order of first name - last name.Making a call/video call from the phonebook1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabuSelect a phonebook entry you want to make a call to.2On the profile screen, tap a phone number.3[Call]/[Video call].Editing a phonebook entry1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabuSelect a phonebook entry to edit.2On the profile screen, [Edit].3Select a required item and edit.4[Save].Managing phonebook
104PhoneRegistering a phonebook entry to Favorites1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabuSelect a phonebook entry to add to Favorites.2On the profile screen, tap  .❖Information・To display phonebook entries added to Favorites, on the phonebook list screen, tap "Group" tabu[Favorites].Using optional menu1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tab/"My profile" tab.2On the Contacts/My profile screen, tap .・On the Contacts screen, select a contactuOn the Profile screen, tap   to display the option menu of the profile screen.■ Phonebook list screen*1 Signing in to cloud is required.*2 Subscription to i-concier is required.Delete contactSelect and delete several/all phonebook entries.Cloud menu*1Display cloud menu.SD card/SIM card/commonExport/import phonebook entries or send them via Bluetooth or Email (P.106).Settings International use setting for docomo phonebookSet for using docomo phonebook overseas.d ACCOUNT/Wi-Fi settingsSet a d ACCOUNT to use docomo services via Wi-Fi.Contacts display orderSet display order of phonebook entries.Accounts to displaySet a phonebook to be displayed in the phonebook list screen.i-concier menu*2Set the phonebook support function for i-concier.HelpDisplay Help of docomo phonebook.Number of registered contactsDisplay the number of contacts registered to each account.AboutDisplay version etc. of docomo phonebook.
105Phone■ Profile screen■ My profile screenSetting phonebook entries to Group1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Group" tab.2Tap a group.3[Add member]uMark phonebook entries to addu[OK]u[OK].❖Information・To cancel group setting, in Step 3, [Delete member]uMark phonebook entriesu[OK]u[OK].・When you set Google account etc., display groups by account. You can set/cancel group in the same account.Creating a new group in the phonebook1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Group" tab.2[Add group].3On the group adding screen, select the account and enter account, group name, icon, coloru[OK].・The items vary depending on the account type.❖Information・Groups in docomo account can be sorted. To do so, tap [Sort] in Step 2 and follow the onscreen instructions.・Groups added to your docomo account, as well as your Google account, etc. can be edited/deleted. To edit/delete a group, touch and hold a groupu[Edit group]/[Delete group].ShareSend a displayed phonebook entry with Bluetooth function, Email, etc.DeleteDelete a displayed phonebook entry.Set ringtoneSet a ringtone for displayed phonebook entry.Join/SeparateJoin/separate displayed phonebook entry.Send My profileIf you change the My profile content, send the changed content to mail addresses that are registered to the docomo phonebook all at once.ShareSend a content saved to My profile using Bluetooth function, Email, etc.
106PhoneChecking My profile and editing information1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "My profile" tabu[Edit].2On the My profile screen, enter necessary information such as name.3[Save].Phonebook entries can be imported from a microSD card or docomo nano UIM card, or exported to a microSD card. This is useful, for example, when you want to move the contact information to another phone. Also, sending all phonebook data via Bluetooth function, Email, etc. is available.・To backup to/restore from a microSD card, use docomo Data Copy (P.155).・You can also use a synchronization service for synchronizing your phonebook (P.188).・For exporting to/importing from a microSD card, insert a microSD card in advance (P.34).1From the Home screen, [ドコモクラウド (docomo cloud)]u[docomo phonebook]uTap "Contacts" tabuu[SD card/SIM card/common].2Select an item.・When [Send all data (common)] is tapped, confirm the displayed content and the drag the status baruTap [Finished exporting contacts.] and select the application to send.・After this step, follow the onscreen instructions.Importing/Exporting/Sharing phonebook entries
107Mail/Web browserMail/Web browserSend/receive mails using DOCOMO mail address (@docomo.ne.jp).Data can be easily transferred when changing models or restored when you have lost the terminal since sent and received mails are saved on the docomo mail server. Also, your d ACCOUNT allows you to use the same email address to send, receive, and view email on several devices, such as tablets and computers.For details of docomo mail, refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/service/docomo_mail/ (in Japanese only)1From the Home screen, tap  .・After this step, follow the onscreen instructions.You can send/receive text message to/from a mobile phone number as a recipient.For details of available number of characters etc., refer to "Short Message Service (SMS)" on NTT DOCOMO website.1From the Home screen, u[Messaging].2Tap   (Write new message).3Enter the recipient's phone number.・Tap   to select a contact from the registered contacts. Tap [Index] to search contacts from the index character.4[Write message]uEnter a message.・When the number of entered characters comes close to a limit, a number of enterable characters appears on the lower right of the text box.5Tap  (Send).docomo mail Message (SMS)Sending message (SMS)
108Mail/Web browser❖Information・You can also send/receive text messages to/from customers of overseas network operators. Refer to NTT DOCOMO website for details on the countries and overseas network operators that provide this service.・To send SMS to users of overseas network operators, enter "+", "Country code" and then "the recipient mobile phone number". Enter the phone number without a leading "0", if any. Alternatively, enter "010", "Country code" then "the recipient mobile phone number" in order.Sent/received message (SMS) is displayed in thread by recipient/sender.1From the Home screen, u[Messaging].・Senders with unread messages (SMS) are displayed in bold font.2Select a sender whose messages (SMS) you want to read.❖Information・When you receive a message (SMS),   appears on the status bar. Drag the status bar downwards to read the received message (SMS).・Touch and hold a message (SMS)uTap [Add star] to add a star. To check starred messages (SMS) in a list, from the Home screen, tap u[Messaging]uu[Starred messages].1From the Home screen, u[Messaging].2Tap an image part for a phone number to saveu[SAVE].3[Add new contact]/[Add to the existing contact].・When "Add to the existing contact" is selected, select a contact to save to.4On the profile edit screen, enter necessary information such as nameu[Save].❖Information・If the sender is already saved in the phonebook, you can tap photo or image part in Step 2 to check the registered information in the phonebook.Reading message (SMS)Saving phone number of message (SMS) to phonebook
109Mail/Web browser1From the Home screen, u[Messaging].2Select a sender/recipient whose messages (SMS) to delete.3Touch and hold a message (SMS) to delete.4[Delete message]u[DELETE].❖Information・To delete several messages (SMS), in Step 3, u[Delete messages]umark the messages (SMS)uu[DELETE].1From the Home screen, u[Messaging].2Touch and hold a sender/recipient you want to delete.3u[DELETE].❖Information・To delete messages (SMS) of several senders and recipients, in Step 3, mark the senders/recipientsuu[DELETE].1From the Home screen, u[Messaging].2u[Settings].* With silent mode (Mute) turned on, the terminal does not vibrate when receiving messages (SMS).Deleting a message (SMS)Deleting messages (SMS) by sender/recipientChanging settings for Messaging (SMS)Notification soundSet notification sound for receiving.NotificationsSet whether to show message (SMS) arrival notification in the status bar.Notification vibration*Set whether to notify with vibration when receiving.Notification lightSet whether to notify with the notification LED for receiving when the backlight is turned off.Delivery reportSet whether to mark to the messages (SMS) that you send when the recipient receives them.Default SMS appSet a default messaging application.Blocked numbersSet whether to block the incoming calls and messages (SMS) from the registered phone number.Cost savingSet whether to convert the special characters for foreign countries to send more text.SIM messagesManage messages (SMS) saved to a docomo nano UIM card.SMS center numberCheck SMS center number.
110Mail/Web browserYou can add a POP3 or IMAP compatible email account provided by general provider, or an Exchange ActiveSync account to send or receive email.You can set multiple Email accounts.Set an Email account following the onscreen instructions.1From the Home screen, u[Email].・To set a second or subsequent email account, from the Home screen, u[Email]uu[Settings]uTap [Add account].2Enter an email addressu[NEXT].3Enter a passwordu[NEXT].・To set up an email account manually, tap [MANUAL SETUP] and follow the onscreen instructions.4Follow the onscreen instructions to configure necessary itemsuTap [NEXT] to finish the setting.・If the screen for selecting type of account appears, tap the type of the email account and follow the onscreen instructions to set.5Enter your account name and the name to be displayed in your outgoing emailsu[FINISH SETUP].・Inbox for set email account appears.❖Information・If you need to make the settings manually, contact your email service provider or system administrator for the correct email account settings.・If you set an Exchange ActiveSync account as an email account, and if server manager sets Remote wipe, the data saved in the terminal may be deleted.EmailMaking initial setting for Email
111Mail/Web browser1From the Home screen, u[Email].2Tap   (Write new message).3Enter the email address of recipient.・When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed.・To enter multiple email addresses in characters directly, separate with a comma (,) or a space input and then enter the next email address.・To add Cc or Bcc recipients, uMark "Show Cc"/"Show Bcc".4Enter a subject and message.5Tap  (Send).❖Information・To attach a file, while creating an email, tap   and select a file.・To save an email as draft, when creating an email, tap u[Save as draft] or change screen to another one.・Email is handled as an email from a PC. Your email cannot be received if rejecting emails from PCs is set on a recipient terminal.1From the Home screen, u[Email].・If you have set up more than one email account, tap uuTap the email account to receive the emails.2On the Inbox, flick the screen down.・This refreshes the Inbox.3Tap an email you want to read.❖Information・The sender name of a received email is the name set on sender's terminal.・If you specified "Notification" in the email account settings (P.113) and set "Check frequency" to an option other than "Manual",   appears in the status bar to notify you when you have received a new email. Drag the status bar downwards to read the received email.・Tap an address of received email to register the address to the phonebook. For addresses already registered, displaying phonebook entries is available.・Tap   /   in the Inbox or the email message window to highlight the star and add the email to the "Starred" filter. To see a list of starred emails, tap  in the InboxuuTap the email accountuuTap   of "Filters"u[Starred].Creating and sending email Receiving and reading email
112Mail/Web browserSaving attachment file of email1From the Home screen, u[Email].2Tap an email with attached files.・When attached file is not loaded, tap [LOAD].3Tap [SAVE] of fileuSelect a saving destinationu[SAVE].1From the Home screen, u[Email].2Tap an email to reply or forwarduTap any of [REPLY]/[REPLY ALL]/[FORWARD].・When you tap [FORWARD], enter an email address to forward to.3Enter a message.4Tap  (Send).❖Information・To delete the original email content, unmark "Quoted text".・When you forward an email, the attachment file of the original message is attached. To delete attached file, tap  .1From the Home screen, u[Email].2Tap an email to delete.3Tap .❖Information・To delete more than one email, in Step 2, touch and hold an emailuMark the emailsuTap .・If "Delete confirmation" is ON in the Settings for "Email" application, the confirmation screen appears after   /   is tapped. Tap [DELETE].Replying/Forwarding emailDeleting email
113Mail/Web browser<Example> Setting up an email account that supports IMAP1From the Home screen, u[Email].2u[Settings].3Tap an Email account you want to change the settings for.* With silent mode (Mute) turned on, the terminal does not vibrate when receiving emails.❖Information・The items vary depending on the account type.・If you set "Check frequency" to an option other than "Manual", and you are using a pay-as-you-go data communication plan, packet communication charges may apply every time you check for new emails.Changing Email account settingsNotificationConfigure Status bar notification, Notification sound, Vibrate*, and Notification light settings.Sync settingsCheck frequencySet how often the Email application checks for new emails.Days to syncSet a period of emails for sync.Auto download attachmentsSet whether to download attached file automatically when connecting via Wi-Fi.Pre-download limitSet whether to download whole email including the message text before the email is opened.General settingsAccount nameChange account name.Your nameChange your name (sender name).Incoming settingsSpecify a username, password, and other settings for the incoming server.Outgoing settingsSpecify a username, password, and other settings for the outgoing server.SignatureChange your signature or specify how to insert it.Quick replyRegister phrase that can be inserted when creating an email.SecuritySelect certifications, set digital signature or encryption.Temporar y filesDelete temporary files.Delete accountDelete Email account.
114Mail/Web browser・You can change the settings for the "Email" application with the setting items displayed below the account in Step 3.You can use the email services provided by Google or by general providers.・Set up your Google account (P.187) or email account by following the onscreen instructions, if you have not already done so.・If you do not synchronize Gmail after Google account is set, "Account not synced" screen appears. Follow the onscreen instructions.❖Information・For details on Gmail, from the Home screen, tap [Google]u[Gmail]uu[Help & feedback] to see Gmail Help.1From the Home screen, [Google]u[Gmail].2Tap  (Compose).3Enter the email address of recipient.・When you enter a name or email address in the email address field, contacts matched to the entered numbers or letters are listed.・Tap   to add Cc or Bcc recipients.4Enter a subject and message.5Tap  (Send).❖Information・To attach a file, when creating a Gmail, tap u[Attach file] and select the file.1From the Home screen, [Google]u[Gmail].2On the Inbox, flick the screen down.・This refreshes the Inbox.GmailSending GmailRefreshing Gmail
115Mail/Web browserArea Mail is a service which allows you to receive earthquake early warning or tsunami warning, emergency warning related to weather etc. delivered by the Meteorological Agency, and disaster/evacuation information delivered by the national government or local governments without being influenced by congestion.・Area Mail is a free service for which subscription is not required.・Area Mail cannot be received in the following case.- During a voice call (except for VoLTE voice calls)- Out of service area- While power is off- During International roaming- During Airplane mode- When software is being updated- When a SIM other than by DOCOMO is inserted - While sending/receiving a message (SMS)・Area Mail may not be received when tethering is set or during packet communications.・Area Mail (earthquake early warning) that could not be received cannot be received later.Area Mail (tsunami warning, emergency warning related to weather etc., disaster/evacuation information) can be resent. In the case you could not receive it, you can receive it again.A notification content screen appears and you are notified by dedicated buzzer sound or dedicated ringtone and vibration.・The buzzer sound and the ringtone cannot be changed.1Receive Area Mail automatically.2The buzzer or the ringtone sounds.3A message of Area Mail appears automatically.Early Warning "Area Mail"Receiving Early Warning "Area Mail"
116Mail/Web browserViewing received Area Mail later1From the Home screen, u[Disaster kit].2[Early Warning "Area Mail"].3Select an Area Mail from the Area Mail list.❖Information・Up to 50 messages can be saved. If savable amount of Area Mail exceeds the limit of maximum, the oldest one is deleted in order.Deleting Area Mail1From the Home screen, u[Disaster kit].2[Early Warning "Area Mail"].3Mark the Area Mail in the listu[Delete]u[OK].1From the Home screen, u[Disaster kit].2[Early Warning "Area Mail"].3u[Settings].* Not displayed when the language is set to English.❖Information・To set Emergency mode, from the Home screen, u[Disaster kit]uTap  (P.48).Setting Early Warning "Area Mail"Receive settingSet whether to receive Area Mail.Beep toneSet the sounding time or the sound volume for Area Mail reception, and whether to sound a dedicated ringtone even in silent mode.Check screen image and beep toneCheck the ringtone and the screen for reception of earthquake early warning, tsunami warning, or disaster/evacuation information (including emergency warning related to weather etc.).やさしい日本語表示 (Simple Japanese display)Set whether to display earthquake early warning, tsunami warning in simple Japanese.翻訳・アプリ連携設定 (Translation/App link setting)*Set whether to translate the received content or use the link with the other applications.
117Mail/Web browserUse "Chrome" application to view web pages like on a PC.You can use "Chrome" application via packet communication and Wi-Fi network with the terminal.1From the Home screen, tap  .2Tap the web page address entry field on the top of the screen.・When address entry field is not displayed, flick down the screen to display.3Enter a web page address or keyword to search.・Tap   for address entry field to enter search words in voice sound.・As you enter an address or characters, retrieved web pages list appears.4Select a candidate or tap   on the software keyboard.・To zoom-in/-out web pages, pinch-out/-in or double-tap the screen.・To go back to the previous page, tap b.❖Information・To copy text on web page, touch and hold a textuDrag   or   to select a range of textuTap [COPY ].Adding a new tabOpen multiple tabs and view web pages.1From the Home screen, uu[New tab].2Display a web page.・A number in the icon next to the address entry field indicates the number of tabs that are opened.Opening incognito tabYou can browse web pages without viewing history and search history.1From the Home screen, uu[New incognito tab].2Display a web page.❖Information・Around address entry field is displayed in gray with incognito tab.・To close an incognito tab, see "Closing a tab" (P.118).・Web pages opened with incognito tab are not displayed in History. When the tab is closed, record of Cookie etc. is erased. Downloaded files or bookmarked web pages can be saved with incognito tab.ChromeDisplaying web pages
118Mail/Web browserChanging tabs1Tap .・Currently opened tabs are displayed with thumbnails in a list.2Tap the tab.❖Information・A number in the icon explained in Step 1 varies by the number of tabs that are opened.Closing a tab1uTap   of tab you want to close.・Alternatively, flick a tab left or right to close it.❖Information・A number in the icon explained in Step 1 varies by the number of tabs that are opened.Searching text in a web page1From the Home screen, uu[Find in page].2Enter a search word.・Tap   /   to move the highlight to the next/previous item.❖Information・Tap   to close the search bar.1From the Home screen, tap  .2u[Settings].Changing Chrome settingsSign in to ChromeSign in to Chrome with your Google account.Search engineSet the search engine.Autofill formsSet an address or credit card information to be used for the automatic input.Save passwordsSet whether to save the passwords entered to web pages.Home pageSet the Home page.PrivacySet the display of suggestions for navigation error or suggestions for the address entry field, or clear the browsing history data.AccessibilitySet the font size or zooming.Site settingsMake settings related to webpage such as Cookie or Javascript.Data SaverSet whether to reduce data communication amount.About ChromeCheck the versions of Chrome etc.
119Mail/Web browserTouch and hold a link or an image in a web page to copy the URL or download the image.❖Information・In some website, downloading of files etc. may not be available.You can check history, save bookmarks, etc.Bookmarking a web page1From the Home screen, uDisplay a web page.2uTap .Opening a bookmark1From the Home screen, uu[Bookmarks].2Tap the bookmark you want to open.❖Information・You can edit, delete, etc. a bookmark in the bookmark list by tapping   or touching and holding a bookmark.Checking history1From the Home screen, uu[History].2Tap a history to check.❖Information・To delete history, tap   of history.・To delete all history, [CLEAR BROWSING DATA...]uSelect a period to clear the datauCheck that a checkmark is put to "Browsing history", then tap [CLEAR DATA].Operating linksManaging bookmarks and history
120AppsAppsIn dmenu, you can easily access sites recommended by DOCOMO or convenient applications.1From the Home screen, [dメニュー (dmenu)].・Browser is activated, "dメニュー (dmenu)" appears.❖Information・To use dmenu, Internet connection by packet communication (LTE/3G/GPRS) or Wi-Fi is required.・For connecting dmenu and downloading applications introduced in dmenu, packet communication charge is applied separately. Some applications automatically perform packet communications.・Paid applications are included to the applications introduced in dmenu.dmarket provides a variety of services, offering digital content, such as music, videos, and books, and giving you access to a shopping site, travel booking site, and other sites.1From the Home screen, [dmarket].❖Information・For details on dmarket, refer to the following website.https://d.dmkt-sp.jp/common/about/index.html (in Japanese only)dメニュー (dmenu) dmarket
121AppsWith Google Play, you can directly access useful applications or fun games and you can download and install them on the terminal.・To use Google Play, you need to set a Google account (P.187).・For details on purchasing applications, returning your purchases, or requesting a refund, see Google Play Help.・Once you accept the installation of an application, you will be held responsible for its use. Be careful especially about applications which access many functions or large amount of data.・Make sure the security of application, then install it at your own risk. The terminal may be infected with a virus and the data may be damaged.・NTT DOCOMO is not liable for any malfunctions or disadvantage brought to you or any third party due to application which you installed and provided by a third party including Google Inc.・For the application which you installed from Play Store and provided by the third party including Google Inc., contact each provider.1From the Home screen, [Play Store].2Search applicationsuTap an application to install.・Check the displayed contents carefully and follow the onscreen instructions.❖Information・Some applications automatically perform packet communications. Packet communication is kept active unless you disconnect it or the time-out error occurs. To cut off packet communication manually, from the Home screen, tap u[Settings]u[More]u[Mobile networks]u for "Mobile data traffic"u[OK].・Some applications may be updated automatically.1From the Home screen, [Play Store].2u[My apps & games].3Tap the applications to uninstallu[UNINSTALL]u[OK].・When you uninstall a charged application, a screen for refund may appear. For details, see Google Play Help.Play StoreInstalling an applicationUninstalling an application
122AppsThis function allows you to use "おサイフケータイ対応サービス (Osaifu-Keitai compatible service)" by which you can pay money or use coupon, etc. or "かざしてリンク対応サービス (Kazashite-Link compatible service)" by which you can access information by holding the terminal over a home electric appliances or smart poster.You can save electronic money and points to an IC card of the terminal and a docomo nano UIM card to check the balance or points on the screen.Also, you can prevent from being used without asking in case of theft or loss by locking Osaifu-Keitai function.For details on Osaifu-Keitai, see NTT DOCOMO website.・Make settings from the dedicated website or application to use Osaifu-Keitai compatible services.・The data in the IC card*1 or the docomo nano UIM card*2 may be lost or altered because of the malfunction of the terminal (when we repair your terminal etc., as we cannot keep it with data remained, you are required to erase the data by yourself). For support such as reissuance, restoration, temporary preservation or transfer of data, contact Osaifu-Keitai compatible service providers. For important data, be sure to use a service with backup service.・To use Osaifu-Keitai compatible services that utilize data on the docomo nano UIM card, you need to install and configure the appropriate application provided by the Osaifu-Keitai compatible service provider. This applies even if you plan to change the model of your terminal and continue using your current docomo nano UIM card.・If the data in the IC card or the docomo nano UIM card is lost, altered or damaged by any means related to Osaifu-Keitai compatible service such as malfunction or model change, DOCOMO assumes no responsibility for the loss of data.・If the terminal is stolen or misplaced, immediately contact Osaifu-Keitai compatible service provider for an advice.*1 Data saved in the IC card installed in the Osaifu-Keitai compatible terminal*2 Data stored on a docomo nano UIM cardOsaifu-Keitai
123AppsPlease note the following when holding the terminal over an IC card reader or NFC module equipped device.・Bring the NFC / Osaifu-Keitai position close to the device slowly without hitting it strongly.・Hold the NFC / Osaifu-Keitai position over the center of the device and parallel to it. If scanning fails even with it held in front of the center of the scanner, slightly lift up the terminal, or move it backwards/forwards or to the left/right.・If there are metal objects between the NFC / Osaifu-Keitai position for holding over and the other device, scanning may fail. Putting the terminal into a case or cover may affect communication. In that case, remove the case or cover.NFC / Osaifu-Keitai position for holding overThe position for holding over when using NFC / Osaifu-Keitai is on the front of the terminal.1From the Home screen, u[Osaifu-Keitai].2Select the service from the service list.・Download an application compatible with service site or service.3Hover the NFC / Osaifu-Keitai position near the IC card reader.Notes on holding over the deviceUsing "Osaifu-Keitai compatible service"
124Apps❖Information・You can scan and write data to or from an IC card reader without activating Osaifu-Keitai compatible application.・These services are available even when the terminal is off. However, they may not be available if the terminal has been off for a long time or the battery is too low.・The Osaifu-Keitai compatible application performs communication which is necessary for providing the Osaifu-Keitai service in the background regardless of the setting of "STAMINA mode" (P.177) or "Data saver" (P.162), and the packet communication charge may be incurred.・Depending on your installed Osaifu-Keitai compatible application or its settings, your terminal may not respond even when you hover it over an IC card reader if the screen is locked or if the screen backlight of the terminal is off.・After the power of the terminal is turned on or the terminal is restarted, cancel the screen lock and then hold over a reader to use the Osaif-Keitai service.・You can use Osaifu-Keitai compatible service even when the PIN code for docomo nano UIM card cannot be unlocked or PIN locked.・Note that when you do not subscribe to sp-mode, some functions of Osaifu-Keitai compatible service may not be available.1From the Home screen, u[Settings]u[More].2[NFC / Osaifu-Keitai settings]uTap  for "Reader/Writer, P2P"u[OK].・NFC Reader/Writer, P2P function is enabled, and   appears in the status bar.3Hold the NFC / Osaifu-Keitai position over a device with the NFC module or a smart poster, etc.Use "NFC / Osaifu-Keitai lock" settings to restrict the use of Osaifu-Keitai function and related services.・NFC / Osaifu-Keitai lock is different from screen lock for the terminal, SIM card lock.1From the Home screen, u[Settings]u[More].2[NFC / Osaifu-Keitai settings]u[NFC / Osaifu-Keitai lock].Using " かざしてリンク対応サービス (Kazashite-Link compatible service)"Locking Osaifu-Keitai function
125Apps3Enter a passwordu[NEXT].・When using "NFC / Osaifu-Keitai lock" for the first time, enter a password to set.・Osaifu-Keitai function is locked, and   or   is displayed in the status bar.❖Information・Note that you cannot cancel "NFC / Osaifu-Keitai lock", if the battery runs out while "NFC / Osaifu-Keitai lock" is set. Be careful about remaining battery level. If you cancel "NFC / Osaifu-Keitai lock", charge the terminal before canceling.・You need to unlock to use Osaifu-Keitai menu while "NFC / Osaifu-Keitai lock" is set.・"NFC / Osaifu-Keitai lock" password is not be deleted even if you reset the terminal.・When unlocking "NFC / Osaifu-Keitai lock", insert the same docomo nano UIM card as the one inserted when "NFC / Osaifu-Keitai lock" was set, then unlock.■NFCNFC is an abbreviation for Near Field Communication and a short range wireless communication method of international standard defined by ISO (International Organization for Standardization). You can use a contactless IC card function, Reader/Writer function, P2P function, and others.You can set whether to enable or disable Osaifu-Keitai compatible services or other services that you can use by hovering your terminal over an IC card reader.・For details on the Tap & pay feature, from the Home screen, u[Settings]u[More]u[NFC / Osaifu-Keitai settings]u[Tap & pay]uuTap [Help] to see Tap & pay Help.1From the Home screen, u[Settings]u[More].2[NFC / Osaifu-Keitai settings]u[Tap & pay].3Select a service."iD" refers to electronic money offered by docomo. Once you have set up "iD" on your Osaifu-Keitai, you can hover the terminal over an IC card reader at various shops to make your shopping easier and more comfortable. You can register the information of up to two cards, and use either one depending on the privilege.・To use iD with your Osaifu-Keitai, you need to configure settings using the iD application.・The charges required for iD service (including the annual charge) vary by card issuer.Tap & payiDアプリ (iD application)
126Apps・Setting up the iD application or checking its information overseas will incur packet communication charges that are different from those in Japan.・For details on iD, refer to iD website.http://id-credit.com/ (In Japanese only)ToruCa application allows you to save coupons offered by your favorite shops and other useful information (ToruCa) to your terminal. You can obtain ToruCa in various ways, such as via email, Web download, Bluetooth, or IC tags. You can easily update your ToruCa.For details of ToruCa, refer to NTT DOCOMO website.❖Information・For obtaining, displaying or updating ToruCa, a packet communication charge may be applied.・To obtain ToruCa via Bluetooth, you must turn on the Bluetooth feature of the "ToruCa" application.・To obtain ToruCa from an IC tag, you must set Reader/Writer, P2P (P.200) of the terminal to ON.・Depending on the settings of content provider, the following functions may not be available.- Updating/sharing ToruCa/displaying map/obtaining from the IC card reader・You may not be able to obtain ToruCa with an IC card reader, if you do not make initial setting for Osaifu-Keitai.・The "ToruCa" application performs communication which is necessary for obtaining ToruCa in the background regardless of the setting of "STAMINA mode" (P.177) or "Data saver" (P.162), and the packet communication charge may be incurred.・ToruCa may not be obtained by using Bluetooth function, an IC tag or a reader until the screen lock is canceled after the terminal is started. ・The backlight may be turned on when ToruCa is received via Bluetooth function with the screen backlight turned off.ToruCa
127AppsTV is an application with which you can switch between Full seg and 1Seg and watch according to the air wave reception condition. In addition, since the data broadcasting can be received with images and sounds, interactive service using communication function of mobile devices and receiving detailed information are available.With Full seg, you can watch a terrestrial digital TV broadcasting service in high-vision quality.With 1Seg, you can watch a terrestrial digital TV broadcasting service for mobile devices.For details on "Full seg/1Seg" service, see the following website.The Association for Promotion of Advanced Broadcasting Serviceshttp://www.apab.or.jp/Using Full seg/1SegFull seg and 1Seg are services provided by TV broadcasting enterprises (stations), etc. A communication fee for receiving video picture and sound is not required. Contact NHK for details on your NHK viewing fees.There are 2 types of information displayed in the data broadcasting area: "Data broadcasting" and "Data broadcasting site". "Data broadcasting" is displayed using airwave along with images and sounds; while "Data broadcasting site" is displayed by connecting to a site provided by TV broadcasting enterprises (stations), etc., using information of data broadcasting.For viewing "Data broadcasting site", etc., packet communication fees are charged.Some sites require information fees.AirwavesFull seg/1Seg is a broadcast service and a different type of radio waves (airwaves) from that of LTE service or FOMA service is received. Therefore, regardless of whether you are in or out of LTE service or FOMA service area, it cannot be received where airwaves do not reach or during broadcasting interruptions.TV
128AppsAlso, even in a terrestrial digital TV broadcasting service area, reception condition may be poor or reception may be unavailable in the following places:・A place far from the tower that the airwaves are sent from・Mountain-ringed regions or a place between buildings where airwaves are interrupted by geography or buildings・Tunnel, underground or far back from a building where airwaves are weak or do not reachChanging the direction of the TV antenna cable or moving to another location may improve signal reception.TV antenna cableTo watch TV with the terminal, use the supplied TV antenna cable SO01.1Connect the connector plug of TV antenna cable SO01 to the headset jack of the terminal.❖Information・To output voice sound from commercially available earphones or headphones, connect the earphone or headphone to TV antenna cable SO01. When connecting earphones or headphones, insert them firmly, straight into the connection terminal of TV antenna cable SO01.
129Apps1From the Home screen, u[TV].・When using for the first time, make channel settings according to the onscreen instructions (P.131).■ TV watching screenaFull seg/1Seg switching iconbData broadcasting iconcRemote control buttondOption menueBroadcasting service in watching (Full seg/1Seg)fImagegSubtitleshChannel, broadcasting station and program informationiReception signal leveljRecord iconkChannel selection key・Touch and hold   /   to search available channels.lData broadcasting・For 1Seg programs, data broadcasting can be viewed only in the portrait screen.mData broadcasting remote control❖Information・In portrait screen in Full seg, you can see a remote control for data broadcasts, and you can display a channel list and program information.・To view data broadcasting in full screen, in portrait screen in 1Seg, touch and hold the data broadcasting areau[Broadcast data full-screen].・To show/hide icon such as option menu, on the TV watching screen, tap an image.・While watching TV, press the volume key to adjust the sound volume.・You can watch TV in the portrait screen or landscape screen (P.46).・To switch channels for watching, operate any of the following.- Tap the channel selection key.- Flick an image on the TV watching screen left or right.- Touch and hold an image on the TV watching screenuSelect a channel from the displayed channel list.・It may take a time to acquire image data or broadcasted data when you activate TV or change channels due to characteristic of digital broadcasting.・According to the airwave condition, image or sound may be interrupted or stopped.Watching TVhidkjcbagfeTV watching screen (Full seg, Full screen)hidkcbajfgelmTV watching screen (Full seg, with Data broadcasting)
130Apps・Answering an incoming call while watching TV temporarily pauses the program. The program resumes automatically after the call ends.・To watch data broadcasting, call charge or packet communication charge is not required. If you use additional services of data broadcasting, etc. via packet communication, packet communication charge is applied.Exiting TV1On the TV watching screen, b.❖Information・You cannot exit TV even if you tap h to return to the Home screen. If TV remains activated, the battery may be consumed quickly.You can set TV watching screen, data broadcasting and channel settings.Using optional menuReserve recording/viewing TV program or make each setting.1From the Home screen, u[TV].2Tap .Setting TVProgram Program guideDisplay the program guide.Program detail infoDisplay detailed information of the program currently watched.Program informationDisplay program information of the channel currently watched.Recorded program listDisplay recorded program list (P.133).Reserve Recording/ViewingReserve programs to record/view, or display the failed reservation list.TV linkDisplay TV link list screen.For some data broadcasting programs, TV links are displayed, and by registering, you can connect to related websites.* 1Change areaRegister or change broadcasting area (P.131).
131Apps*1 Some TV links have period of validity.*2 You can set subtitle position only in landscape view in 1Seg. Also, you have a choice of audio channels only when watching a program with a sub audio channel.Saving channels in the current locationAvailable channels vary depending on the area (broadcasting service area) you are using in.1From the Home screen, u[TV].2u[Change area].3Touch and hold an unregistered item.4[Area info setting]uSelect region, prefecture and locality.5[OK].❖Information・By touching and holding the area registered in Step 3, you can display details, set area information, refresh channels, rename area, and deleting settings.Changing numbers for TV remoteChange TV remote number assigned to each broadcasting station. Each broadcasting station can be called up via the corresponding TV remote number.1From the Home screen, u[TV].2Touch and hold an image.Subtitle/Sound/Video settingTurn subtitles on or off, set their position, or select the main or sub audio channel.* 2SettingsSuperimpose settingSet whether to display superimpose for Full seg or select a superimpose language.Data Broadcasting settingsSet whether to use the location information or the terminal information, clear the broadcasting station memory, or postal code.Auto Exit TimerMake a timer setting to end TV watching.Device ID of receiverDisplay device ID of receiver.NotesDisplay information before use.
132Apps3Tap the broadcasting station to change the remote control numberuTouch and hold the image.4Touch and hold the number of remote control to set to.5[YES].・If you select a number of remote control which is already assigned to another broadcasting station, [Overwrite registered channel]uTap [YES].❖Information・To delete set broadcasting stations, touch and hold a broadcasting station in Step 3u[Delete channel]uTap [ YES].Record images, sound, captions or data broadcasting while displaying.・Data broadcasts can be recorded only in 1Seg mode.1From the Home screen, u[TV].2Tap   to start recording.3u[Stop recording]/[Stop recording as end of program].・To end the recording when the program ends, tap [Stop recording as end of program].❖Information・In Full seg, the maximum size of a single recording file that can be saved is 198 GB, and the maximum continuous recording time is about 1,440 minutes (on a 200 GB microSD card).In 1Seg, the maximum size of a single recording file that can be saved is 2 GB, and the maximum continuous recording time is about 640 minutes.You can save up to 99 Full seg and 1Seg recordings.・Recorded data is saved on a microSD card. Recording is not available if a microSD card is not attached.・When you use the microSD card from another application while recording, recording may fail.Recording TV
133AppsPlaying a recorded program1From the Home screen, u[TV].2u[Recorded program list].3Tap a program to play.❖Information・To delete a recorded program, touch and hold the program in Step 3uuTap [ YES].・To change the title of a program, touch and hold the program in Step 3uuEnter a titleuTap [OK ].・Tap   in Step 3 to set the playback mode and see and sort the amount of available memory.・All still pictures or videos that you capture on the terminal are stored into the internal storage or a microSD card.・To save still pictures and videos to a microSD card, insert one and specify it as the destination where you want to save them, before using the camera (P.142).・When the terminal temperature becomes high, the camera may not activate or may stop.■About the Copyright and Portrait rightsMovies, still images, and sounds recorded on the terminal are prohibited by the copyright law from use without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law. Also, using or transformation of other person’s portrait or name without his or her permission may violate the portrait right. When you post recorded images etc. on the Internet web pages etc., make sure to be aware of the copyright and portrait right. Note that some performances, shows, and exhibitions may be restricted to record even for personal use. Transmission of images related to copyright or beyond the scope provided in the copyright law is not available.Shooting/sending imagesPlease be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones.If you cause the public any trouble using the terminal, you may be punished under law or regulations (for example, nuisance prevention ordinance).Camera
134Apps1From the Home screen, [Camera].・A shooting screen appears.❖Information・When the camera is turned on via Quick launch, the capturing mode is automatically set to "SUPERIOR AUTO" or "VIDEO".・The camera turns off if you do not touch the shooting screen for about 3 minutes (or about 30 seconds if you have turned on the camera in Quick launch mode).Using Quick launch"Quick launch" refers to turning on the camera by pressing and holding k for at least 1 second or by swiping (or flicking)   on the lock screen.・Quick launch operations can be changed (P.144).aAuto focus framebZooming indicator・An image is shot in magnification displayed with the indicator.cDisplay area for status icons・When settings such as Smile Shutter and Save location (Geotagging) are selected, their icons are displayed here.dThumbnail・Tap to display the play screen of shot photo or the preview screen of video (P.146).eSwitching to the front camera iconfCurrent capturing mode (P.135)gFlash setting iconhShutter icon (still picture)Start/stop/pause recording icon (video)・Depending on setting, an icon of Self-timer or Touch capture is displayed.iScene/conditions selection icon・When the capturing mode is "SUPERIOR AUTO" or "VIDEO", the camera determines and detects the scene and display the icon.Also, this area displays an icon when your terminal detects that the camera is moving ( ), your camera is still ( ), or your subject is moving ( ).jOption menuActivating the camera Shooting screenegdhaijcbf
135Apps❖Information・When using "AR effect" and other camera applications, the display and operations are different.・To zoom in or out, set "Use Volume key as" (P.142) to "Zoom" and operate with the volume key, or pinch in or out on the screen.・Zooming is not available when "AR effect" or "Panorama" is set or when shooting with the front camera.・The scene mode in "SUPERIOR AUTO" or "VIDEO" may not be recognized correctly depending on shooting conditions.Changing the capturing modeYou can switch between "SUPERIOR AUTO", "MANUAL", "VIDEO" and "CAMERA APPS".1From the Home screen, [Camera].2Swipe (or flick) the screen.・Swipe (or flick) up or down in landscape view, or right or left in portrait view.・About CAMERA APPS (P.135)■ Capturing modes and resolution/Video resolution* "Super slow motion", "Super slow (one-shot)" and "Slow motion" are shot in HD (30fps/960fps), HD (960fps) and HD (120fps), respectively.Using the camera appsYou can use the camera apps to shoot many types of photos or videos.1From the Home screen, [Camera].2Swipe (or flick) the screen to display the CAMERA APPS list.・Swipe (or flick) down in landscape view, or left in portrait view.3Select an app.・To switch to the other camera app, tap the camera app icon located in the bottom right of the shooting screen (bottom left for portrait view).Capturing modeCapturing mode Resolution (aspect ratio)/Video resolution"SUPERIOR AUTO""MANUAL"19MP (4:3)17MP (16:9)12MP (4:3)12MP (16:9)"VIDEO"Full HD (30 fps/60 fps)HD*VGA
136Apps❖Information・Themes downloaded via "AR effect" will be saved to the internal storage.・Some applications may not be able to play back sound from images taken using the "Sound Photo" feature.・To save the next shot data to the microSD card, using a microSD card (Speed Class 10 or UHS speed class 1) which supports high-speed writing is recommended.-4K video- Super slow motion- Super slow (one-shot)-Slow motion・For details on the features of the camera, refer to the following website.http://www.sonymobile.co.jp/myxperia/howtoxperia/camera/ (in Japanese only)■ Notes on shooting with Panorama・The following cases are not suitable for shooting with Panorama.- Shooting a moving object- Shooting the main object that is too close to the camera- Shooting an object with repetition of the same pattern such as a sky, beach, grass, etc.- Shooting a big object- Shooting an object with constantly changing pattern such as a wave, waterfall, etc.・Because two or more images are joined together, joints may not be recorded smoothly.・Images may be blurred or may not be taken in a dark scene.・Under the flickering light source such as a fluorescent light, you may not be able to shoot properly since brightness or color balance of joined image may be unstable.・If the brightness, color balance, focus point of whole image, etc. are extremely different between the entire angle view of Panorama shot and the focused angle view, the image may not be shot properly.
137Apps■ Shooting with the shutter icon1From the Home screen, [Camera].2Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen.3Tap the shutter icon ( ).■ Shooting with "Touch capture"Set "Touch capture" (P.142) to "On".1From the Home screen, [Camera].2Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen.3Tap the shooting screen.❖Information・To use "Touch capture" with the camera app, switch to the camera app and then set "Touch capture" to On.■ Shooting with the camera key1From the Home screen, [Camera].2Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen.3Press k.・When shooting with auto focus, press k halfway, and after the auto focus frame turns blue, firmly press k the rest of the way until it stops.■ Shooting with Hand ShutterWhen shooting with the front camera, turn your palm toward the camera to shoot automatically. You can take picture of yourself without operations such as tapping an icon etc.・Set "Auto capturing" (P.141) to "Hand Shutter".1From the Home screen, [Camera].2Swipe (or flick) the screen to display "SUPERIOR AUTO" or "MANUAL" shooting screen.3Switch to the front camera and then turn your palm toward the camera.・Tap   to set self-timer.・When a palm mark appears, a photo is taken.Shooting still pictures
138Apps❖Information・When the auto focus frame does not appear, focusing may be failed.・When a face of subject is detected, an auto focus frame is displayed at the position of the face (up to 5 frames). The frames around faces that the camera has automatically focused on—autofocus frames—are displayed in yellow.To select the face you want to focus on, tap the frame around that face.・When "Object tracking" (P.141) is turned on, tap the subject on the shooting screen to display the object tracking frame.・When you connect a commercially available earphone or Bluetooth device, shutter sound may be softer than usual.■ Shooting with the start/stop icon1From the Home screen, [Camera].2Swipe (or flick) the screen to display "VIDEO" shooting screen.3Tap the start shooting icon ( ).4Tap the stop icon ( ).・Tap the pause/start shooting icon (  / ) to pause/resume recording.■ Shooting with "Touch capture"Set "Touch capture" (P.142) to "On".1From the Home screen, [Camera].2Swipe (or flick) the screen to display "VIDEO" shooting screen.3Tap the shooting screen.・Tap the shooting screen again to stop recording.❖Information・To use "Touch capture" with the camera app, switch to the camera app and then set "Touch capture" to ON.Recording videos
139Apps■ Shooting with the camera key1From the Home screen, [Camera].2Swipe (or flick) the screen to display "VIDEO" shooting screen.3Press k.・Press k again to stop recording.❖Information・Do not cover the microphone with fingers etc. when recording videos.・When you connect a commercially available earphone or Bluetooth device, shooting start/stop sound may be softer than usual.・When shooting video, you can tap the shutter icon ( ) to take a photo.・When you set "Auto capturing (video)" (P.141) to "Smile Shutter", the terminal does not emit shutter sound for shooting a still image by detecting smile while recording video.・When shooting videos with "4K video", set "SteadyShot™" to "Standard" to avoid image distortion (P.142).Changing settings in the option menu・The displayed items vary by the capturing mode and camera app.1From the Home screen, [Camera].2uSelect a setting item.・Tap "More" to view additional settings and share items.・For some camera apps, tap   on the shooting screen to change the settings.3Change the setting.■ Self-timer (only for still pictures)Set the number of seconds for the self-timer.The shutter icon changes into a timer icon. Tap it to shoot after set period of time (seconds) elapses.You are recommended to use the self-timer for avoiding camera shake.Changing settings when shooting
140Apps■ Color and brightness (when "SUPERIOR AUTO" or "VIDEO" is set)Adjust brightness and color. To make adjustments, drag the marker on the bar that appears on the shooting screen.Tap   on the shooting screen and then tap the setting item [Reset Color and brightness] to reset the settings.■ ISO (only when "MANUAL" is set)Set ISO sensitivity.・With ISO sensitivity up, you can shoot clear picture reducing blur even in a place where lightning is poor. However, noise stands out.・With ISO sensitivity down, you can shoot with noise kept low. However, images may be dim and blurred when shot under poor lighting condition.■ HDR (only when "MANUAL" is set)Take lifelike, natural-looking images even in high-contrast scenes, for example when shooting a picture against the sun.・When "HDR" is set to ON, "ISO" is automatically set to "Auto".■ Resolution (only for still picture)Set the resolution for photos. The higher the resolution of a photo, the larger its file size.■ Video resolution (only when "VIDEO" is set)Set the resolution for video. The higher the resolution of a video, the larger its file size.■ Slow motion mode (only when "VIDEO" is set)To select the mode, tap   on the shooting screen to set the Slow motion mode. Super slow motionShoot a moment when   is tapped while shooting a video with the Super slow motion mode.Super slow (one-shot)Shoot a moment when   is tapped with the Super slow motion mode.Slow motionShoot a video with 120fps and select a moment to shoot in the Slow motion mode.・When Slow motion is set, setting the video resolution is not available.・For shooting in Super slow motion or Slow motion, sufficient brightness is needed for shooting due to high- shutter speed.・If you shoot in a place where the quantity of light is lacked such as indoors or a dark place, the quality of image may be rough or the image may be darkened.
141Apps■ Predictive Capture (only when "SUPERIOR AUTO" is set)When the camera detects movement of a subject, up to 4 photos are shot according to the movement.■ Object trackingTap your object on the shooting screen, and the camera will keep focusing on the subject as it moves.■ Metering (only when "MANUAL" is set)Measure the brightness on the shooting screen to determine a well-balanced exposure automatically.FaceDetects faces, measures the brightness, and adjusts exposure to set the appropriate brightness level.MultiDivides the screen into multiple areas, measures the brightness, and adjusts exposure so that the overall brightness is balanced.CenterPut emphasis at the center of the shooting screen and measure photometry at whole view finder to adjust the exposure.SpotMeasure photometry only at the center of the shooting screen to adjust the exposure.TouchMeasure photometry at a point where you tapped in the shooting screen and adjust the exposure.■ Auto capturing/Auto capturing (video)Set to shoot automatically without icon or key operation.Smile ShutterShoot at the moment of a subject smiled. While video shooting, shoot a still image at the moment of a subject smiled.Hand Shutter (only when shooting with Front camera)Turn your palm toward the camera to shoot automatically (P.137).■ Touch to adjust (only when "SUPERIOR AUTO" is set)Set function for adjusting the screen with a tapped point.Focus onlyFocus on a tapped point.Focus and brightnessFocus on or adjust brightness with a tapped point.
142Apps■ SteadyShot™ (only when "4K video", "VIDEO" is set)Set whether to decrease blur by hand shake when shooting.Intelligent active (only when "VIDEO" is set)Reduce camera shake blurring when zooming, or when shooting while walking.StandardReduce camera shake blurring when shooting normally.■ Soft skin effect (only for shooting with Front camera)Set whether to shoot a picture making human skin look smoother.■ Save locationSet whether to tag still pictures/videos location information (geotag) for the shooting spot.・When enabled, location information is added when   appears on the shooting screen.・ appears while acquiring location information. To pictures shot while acquiring location information, geotags are not added.■ Touch captureSet whether to shoot by tapping the shooting screen. If you set "Only front camera", Touch capture turns to On automatically when the camera is switched to the front camera.■ Grid linesSet whether to show a gridline on the shooting screen as a guide.■ Auto photo previewSet whether to display a preview right after shooting.If you set "Only front camera", a preview appears only when you shoot with the front camera.■ Use Volume key asSet function for assigning with the volume key.■ Data storageSet the saving location for shot still pictures/videos.■ Quick launchSet behavior when using Quick launch (P.144).■ HelpDisplay Help for the camera function.
143Apps■ Preview (when "Creative effect" or "Sound Photo" is set)Set whether to display the preview screen or the edit screen after a still image is shot.■ Recording file type (only when "4K video" is set)Select the file type from "H.264" or "H.265".❖Information・Some settings cannot be used in combination with one another.・The operation may differ depending on the capturing mode or camera app.Changing settings using iconsTap the icon displayed on the shooting screen to change the setting.・The displayed icons vary by the capturing mode, camera apps, etc.■ Flash Auto Fill flash Red-eye reduction Off Flashlight■ White balance (when "MANUAL" or "4K video" is set)Set according to the ambient light source.uTap [WB] to set. /    AUTO Incandescent Fluorescent Daylight Cloudy■ Brightness (EV correction) (When "MANUAL" or "4K video" is set)u[EV]uTap a bar or drag a marker to set.■ Shutter speed (only when "MANUAL" is set)Set a shutter speed according to a moving speed of subject etc.u[SS]uTap a bar or drag a marker to set.■ Focus (only when "MANUAL" is set)Set according to a distance from a subject.u[Focus]uTap a bar or drag a marker to set.■ FlashSet whether to use flash when shooting video in a backlit or dark scene. On Off
144Apps■ Slow motion shooting (only when "VIDEO" is set)Tap   to switch to the capturing mode with slow motion. Shoot a moment when   is tapped with Super slow motion.・To change the capturing mode, uTap [Slow motion mode] (P.140).■ Self-timer (only when shooting with Front camera)Tap   to set a number of seconds for self-timer. Each time you tap, it switches in the order of 3 sec.→10 sec.→Off.The shutter icon changes into a timer icon. Tap it to shoot after set period of time (seconds) elapses.Use the self-timer to take a self-portrait or group photo.You are recommended to use the self-timer for avoiding camera shake.■ Switch creative effect (only when "Creative effect" is set)Tap   to switch a type of effect.❖Information・Some settings cannot be used in combination with one another.・The operation may differ depending on the capturing mode or camera app.You can change how the camera works when it is turned on via Quick launch.1From the Home screen, [Camera].2u[More]u[Quick launch].3Tap any of [Launch only]/[Launch and capture]/[Launch and record video]/[Off].❖Information・When the camera is turned on via Quick launch, the capturing mode is automatically set to "SUPERIOR AUTO" or "VIDEO".Changing the Quick launch settings
145AppsView/play photos or videos.1From the Home screen, [Album].・A list of images are displayed in chronological order.■ Image list screenaDisplay the menubFile shot with Predictive CapturecVideo filedOption menu・u[Select items]uTap an image to select for displaying a menu of deletion, share, etc. Tap images continuously to select multiple files.eFile shot with Slow motion mode・Files shot with 120fps and not including slow motion images are marked with  .fSound Photo fileg4K video file❖Information・Depending on the number of saved images, it may take some times to load images.・To zoom in/out an image, flick the image list screen right/left or pinch out/in.・For some DRM protected contents or transfer applications, sharing may be limited.・Touch and hold an image in the image list screen to select the image.・When   is displayed at the upper right of screen, an image or video can be played with Google Cast devices. Tap   and then follow the onscreen instructions to connect. To play with Google Cast devices, connect the terminal to the Wi-Fi network same with a Google Cast device connected to in advance (P.159).1From the Home screen, [Album]uTap an image.・With Sound Photo files, audio is played back with the image.・Tap the screen to display information such as shooting date, option menu icons, etc.・For the files shot with Predictive Capture, tap [SELECT THE BEST] to select the photo to save.AlbumDisplaying photos/videosbcdfegaViewing a photo
146Apps■ Photo viewing screenaReturn to the image list・Alternatively, on the photo viewing screen, flick up/down to return to the image list screen.bShot date・When a location information is saved, its relevant country or place name is displayed. Tap u[Show on map] to view the image on a map.cSharing menu・Upload files to online services, send them via Bluetooth or email.dEdit photoseDeletefOption menu・Add/remove to/from the favorites, play slideshows, configure image settings, rotate images, check detailed information, or add geotags (location information).❖Information・To zoom in/out image display, pinch out/in on the photo viewing screen or double-tap.・The menu displayed may differ depending on the operation or selected file. Also, some files cannot be operated.1From the Home screen, [Album]uTap a video.・A preview screen appears.2Tap .・Tap the screen to display information such as shooting date, option menu icons, etc.■ Video playback screenaEdit a videobOption menucPlay/PausedVideo file name/Recorded dateeShow/Hide operation icons・Show/hide operation icon such as fast forward or a setting icon for repeat play.fProgress bar・Tap on the bar or drag a marker left or right to change a playback position.abdcfePlaying a videoabcdfe
147Apps❖Information・To zoom in/out a video display, pinch out/in on the video playing screen.・The displayed menu may differ depending on the operation or selected video file. Also, some files cannot be operated.Play back music and videos stored on the internal storage or a microSD card using Media Player.・File formats of playable data (P.232)❖Information・For details on Media Player, from the Home screen, u[Media Player]uuTap [Help] to refer to the manual of Media Player.1From the Home screen, u[Media Player].2Tap the appropriate tab at the top of the screen or flick left or right on the screen.3Tap a song/video.■ Music playback screenaAccess dmarketbBack to song listcPlayback pointdAlbum art・Tap here to display the operation bar or the icons to adjust the audio volume, post to SNS, display the album information, etc.Alternatively, on the playback screen, press the volume key to adjust the volume.eRepeat is off/Repeat all songs/Repeat current songfOperate a song : Go back to the beginning of the song or to the previous song : Fast rewind : Pause : Play : Fast forward : Skip to the next songgOption menuhSong informationiShuffle is off/Shuffle is onMedia PlayerPlaying music/videobdecahgfi
148Apps❖Information・You can return to the Home screen to perform another operation while listening to music in the background. To return to the music playback screen, from the Home screen, tap u[Media Player], or drag the status bar downwardsuTap the name of song that is being played.■ Video playback screenaPlayback pointbShare a video between screen mirroring compatible device and the terminalcBack to video listdOperate a video : Go back to the beginning of the video or to the previous video : Fast rewind : Pause : Play : Fast forward : Skip to the next videoeOption menufVideo informationgAuto-rotate screen ON/OFF・Tap   to turn red and disable Auto-rotate screen.hVolume control・Alternatively, on the playback screen, press the volume key to adjust the volume.❖Information・Tap the screen to display option menu icons and other items.Ending Media Player1On the Media Player screen/song player screen/movie player screen,  / u[Exit].adbgcefh
149AppsYour current location can be positioned using GPS, Wi-Fi, or mobile network.The terminal has a GPS receiver that uses satellite signals to calculate your location. Some GPS features use the Internet. Data rates and charges may apply.When you use GPS function to find your location, make sure you have a clear view of the sky. If GPS does not find your location after several minutes, move to another location. To help the search, stand still and do not cover the GPS antenna section (P.30). The first time you use the GPS, it may take a few minutes to find your location.・Use the GPS system with great care. DOCOMO is not liable for any damage caused by abnormality of the system.・Note that DOCOMO shall have no liabilities for any purely economic loss including those due to missing a chance to check the measurement (communication) results because of external factors (including the running out of the battery), such as a failure, malfunction, or any other problems of the terminal or the power failure.・You cannot use the terminal as a navigation device for an aircraft, vehicle, and person. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss while performing a navigation using the location information.・You cannot use the terminal as a high-accuracy measurement GPS. Note that DOCOMO shall have no liabilities whatsoever even if you suffer damage or loss due to a deviation of the location information.・Global Positioning System (GPS) is created and managed by U.S. Department of Defense. And the department is in charge of controlling the accuracy and maintenance of the system. Therefore, some changes made by U.S. Department of Defence might affect accuracy or functions of GPS system.・Some wireless communication products (mobile phone, data detectors and some others) block satellite signals and also causes instability of signal reception.・Some map displays based on location information (latitude/longitude information) may be not accurate due to some countries' or regions' regulations.Location servicesGPS function
150Apps■ Where radio waves are difficult to receiveNote that radio waves may not be received or it may be difficult to receive radio waves in the following conditions, since GPS uses radio waves from a satellite.・Inside or immediately under a building・Inside a bag or box・Inside or under a thick covering of trees・In a car, inside a train compartment・When there are obstructions (people or objects) near the terminal・Inside a basement or tunnel, and below the ground or water・In buildings-clustered or residential area・Near a high-voltage cable・Bad weather such as heavy rain or snow❖Note・If you cannot use a part of or entire GPS function, check that the use of internet is included in your subscription and Wi-Fi (P.158) and Mobile data traffic (P.162) is enabled.・NTT DOCOMO is not liable for navigation services or for the accuracy of location services.Activating GPS/Location servicesYou can position your current location using GPS, Wi-Fi, and information sent from mobile network base stations.1From the Home screen, u[Settings]u[Location].2Tap .3Read the notes on location information and tap [AGREE].❖Information・Your location information is sent to Google without specifying who you are. Your location information may be sent even when the application is not running.The Google Maps application allows you to view your current location, find other locations and search routes.・To use Google Maps, enable Mobile data traffic (LTE/3G/GPRS) or connect to Wi-Fi.・Google Maps does not cover the whole world.Using Google Maps
151AppsFinding the current location on the mapYou can detect your current location using location information service.・To detect current location, enable "Location" (P.150) beforehand.1From the Home screen, [Google]u[Maps].・When a message appears, follow the onscreen instructions.2Tap .・Current location is shown by blue mark.・If you tap  , the icon changes to  , and then the terminal's geomagnetic compass links the direction displayed on the map.・To zoom in/out the map, pinch out/in on the map screen, or double-tap/tap  the screen with two fingers.・If the confirmation screen etc. appears, follow the onscreen instructions.Viewing Street view1From the Home screen, [Google]u[Maps].2Touch and hold a point to show in the street view.3Tap a photo displayed at the lower left of screen.Searching for a location1From the Home screen, [Google]u[Maps].2Fill out the search bar.3Tap   on the software keyboard.4Tap a destination.Displaying informationDisplay information such as traffic information etc. on the map.1From the Home screen, [Google]u[Maps].2uSelect information to display.NavigatingYou can receive detailed guides for your destination.1From the Home screen, [Google]u[Maps].2uSelect a transporting method.3Enter a start point in the upper entry fielduEnter an end point in the lower entry field.
152Apps1From the Home screen, [ドコモクラウド (docomo cloud)]u[Schedule].2uTap [Monthly]/[Week]/[Daily].・Flick the calendar left or right to display the next or previous month/week/day.❖Information・To move the cursor to the current date, in Step 2, tap u[Jump to]u[TODAY]. To move the cursor to the desired date, in Step 2, u[Jump to]uFlick the calendar left or right to select month and then tap a dayuTap [JUMP].・To display all registered schedules in a list, in Step 2, u[Schedule list].・To switch to the "Memo" application screen, in Step 2, uTap [Memo list].1From the Home screen, [ドコモクラウド (docomo cloud)]u[Schedule].2uEnter the item.・For setting alarms, tap [Display input option].3[Save].❖Information・When an alarm of event is set,   appears on the status bar at the set time. Drag the status baruTap [It's time] to display details of the event.Displaying events of Schedule1From the Home screen, [ドコモクラウド (docomo cloud)]u[Schedule]uDisplay a scheduled date/time.・In Monthly view or Week view, tap a scheduled date.2Tap an event to view description.・To edit an event, tap [Edit].❖Information・To delete an event, touch and hold an event in Step 2uTap [Delete one]u[DELETE].・To delete all events, from the Home screen, tap [ドコモクラウド (docomo cloud)]u[Schedule]uu[Delete all]u[DELETE].Setting display conditions in ScheduleWhen a search criteria is set, specified data can be displayed.1From the Home screen, [ドコモクラウド (docomo cloud)]u[Schedule].2u[Conditions].3Select the display conditionu[OK]ub.ScheduleDisplaying scheduleCreating schedule event
153Apps❖Information・To search the contents entered in "title", "text" and "Where?", in Step 3, [Free word search]uEnter a search wordu[OK]u[OK]ub.Use alarm, world clock, stop watch and timer.1From the Home screen, u[Clock].2uSet the item such as time.3[SAVE].❖Information・To delete alarms, in Step 2, tap u[Delete alarms]uMark alarmsu[DELETE]*u[YES].* A number of marked alarm is displayed at the right side of "DELETE".Enabling/Disabling alarm1From the Home screen, u[Clock].2Tap   /   for the alarm you want to turn on or off.Stopping alarm1While alarm is sounding, drag   to the right.❖Information・If you tap [SNOOZE], the alarm sounds again when the set time has passed.・If the screen backlight is on (except on the lock screen), tap the notification at the top of the screen to operate.Display the date and time etc. in cities around the world.1From the Home screen, u[Clock]u"" tab.2uSelect a city.❖Information・Time display during day-light saving time may differ from time difference displayed on the screen when adding a city in Step 2.1From the Home screen, u[Clock]u"" tab.2[START].3[STOP].ClockSetting an alarmUsing World clockUsing Stopwatch
154Apps1From the Home screen, u[Clock]u"" tab.2[SET TIME].3Drag the number up or down to set timeu[OK].4[START].5[STOP].docomo Data Copy application allows you to copy the data saved to the terminal to the other terminal or back up/restore the data. Use this application for transferring the data when changing the model or for the regular backup of important data.You can copy the phonebook entries, images, etc. directly to the destination device using the one-to-one direct communication which does not use the internet. Activate "Data Copy" applications on both a data sending terminal and a copy destination terminal, then align the two terminals.1From the Home screen, u[Data Copy]u[Data transfer].・After this step, follow the onscreen instructions.・This application is needed for both a data sending terminal and a copy destination terminal. If it is not installed, download from NTT DOCOMO website.・Communication method differ depending on your model or the OS.Using Timerdocomo Data CopyData transfer
155Apps・For the supported models or detailed use method, refer to NTT DOCOMO website.You can transfer or back up the data such as phonebook entries or images using a microSD card.・Do not remove the microSD card of turn off the terminal during backup or restoring. The data may be damaged.・If phonebook item names (e.g. phone number, etc.) of the other terminal are different from ones of your terminal, the item names may be changed or deleted. Also, some text may be deleted in copied destination, because savable characters in a phonebook entry vary by terminal.・Contacts that can be backed up are the registered contacts in the docomo account.・When backing up the phonebook entries to a microSD card, the data without Name registered cannot be copied.・If microSD card is low on memory, backup may not be done. In that case, delete unnecessary files to make available space.・If the battery is low, backup or restoration may not be done. In that case, charge the terminal and retry to back up or restore.・You can back up only the data such as still images and movies stored in the internal storage with this application. The data stored in a microSD card cannot be backed up.Backing upBack up the data such as phonebook entries or media files to a microSD card.1From the Home screen, u[Data Copy]u[Backup & Restore].2[Backup].3Mark the data to back up.4[Start backup]u[BACKUP].・The selected data can be saved to the microSD card.5[Back to top].Backing up/Restoring to/from a microSD card
156AppsRestoringRestore the data such as phonebook entries or media files backed up to the microSD card to the terminal.1From the Home screen, u[Data Copy]u[Backup & Restore].2[Restore].3Tap [Select] on data type to restoreuMark data to restoreu[Select].・Tap [Select latest data] to select the latest data for each data type.4Select the restoration methodu[Start restore]u[RESTORE].・For some data types, selecting the restoration method is not necessary.・The selected data is restored to the terminal.5[Back to top].Copying phonebook entries registered in Google account to docomo accountYou can copy the contacts data in your Google account to the docomo account.1From the Home screen, u[Data Copy]u[Backup & Restore].2[Phonebook account copy]u[Select] on Google account contacts to copyu[Overwrite]/[Add].・The copied contacts are saved to your docomo account.3[OK].
157AppsYou can transfer or back up the data such as call history or music using the Data Storage BOX (Cloud).1From the Home screen, u[Data Copy].2u[Backup/Restore to Cloud].3[Backup] or [Restore].・After this step, follow the onscreen instructions.・When you do not log in to docomo cloud, on the confirmation screen, tap [Log in], then follow the onscreen instructions to log in.❖Information・The periodical backup may not be executed at the specified time while the screen lock is set or "STAMINA mode" (P.177) is enabled. In the case, the backup will be executed when the activation is possible next time.・Note that use of Periodical backup with Data Storage BOX (Cloud) may incur a high packet communication charge.Backing up/Restoring to/from Data Storage BOX
158SettingsSettings1From the Home screen, u[Settings].❖Information・The item indicating the set function may be displayed above the "Wireless & networks" depending on the condition of usage of the terminal.With Wi-Fi function, you can connect to an access point for your home, company network or public wireless LAN services to use mail and Internet.■ Reception interference caused by Bluetooth devicesWireless LAN (IEEE802.11b/g/n) devices and the Bluetooth devices use the same frequency band (2.4GHz). If you use the terminal near Bluetooth devices, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. Communication may be interrupted or sound may be lost when playing back streaming data, etc. In these cases, do the following:・Keep the terminal approximately 10 m or more away from the Bluetooth device.・For using within approximately 10 m, turn off the Bluetooth device.Turning on Wi-Fi1From the Home screen, u[Settings]u[Wi-Fi].2Tap .・It may take a few seconds to turn on the Wi-Fi.Viewing the setting menuWireless & networksP. 1 5 8Themes & wallpaperP. 1 6 8DeviceP. 1 6 8Accounts & servicesP. 1 8 6SystemP. 1 9 0Wireless & networksWi-FiP. 1 5 8BluetoothP. 1 9 7Data usageP. 1 6 1Device connectionP. 1 6 3More Airplane modeP. 1 6 3Tethering & portable hotspotP. 1 6 4VPNP. 1 6 6Mobile networksP.167, P.206, P. 2 0 7Network settings resetP. 1 6 8NFC / Osaifu-Keitai settingsP.122, P.199Wi-Fi
159Settings❖Information・Even when Wi-Fi is on, packet communication is available. When a Wi-Fi network is disconnected, the connection is automatically switched to the LTE/3G/GSM network mode. Note that packet communication charge may be applied if the network connection is kept switched.・Turn the Wi-Fi function to off when you do not use Wi-Fi to cut battery power consumption.・Make sure to receive signal strong enough for using Wi-Fi function.Connecting to a Wi-Fi network1From the Home screen, u[Settings]u[Wi-Fi].2Select a Wi-Fi network to connect.・To connect to a protected Wi-Fi network, enter the passwordu[CONNECT].・To connect a Wi-Fi network with WPS compatible device, u[More features]uTap [WPS Push Button]/[WPS PIN Entry] and follow the onscreen instructions.・To scan Wi-Fi networks manually, u[Refresh].❖Information・Depending on your environment, the connection speed may be slow, or Wi-Fi may not be available.・When the terminal is connected to Wi-Fi network successfully, "Connected" appears. When a different message appears, make sure the password (security key).When the connection is not established even if you enter a correct password (security key), the correct IP address may not have been acquired. Check the signal status and reconnect. It may take 5 minutes or more to display the connection result after the operation of the connecting to Wi-Fi network.・If you connect to an access point that is not connected to the Internet,   appears and communication may be performed via mobile network, not via Wi-Fi.・To use docomo services via Wi-Fi, you need to set up your d ACCOUNT. From the Home screen, u[Settings]u[docomo service/cloud]u[d ACCOUNT setting] to set.Deleting connecting Wi-Fi network setting1From the Home screen, u[Settings]u[Wi-Fi].2Tap the Wi-Fi network that is currently connected.3[FORGET].
160SettingsAdding a Wi-Fi network manually・Turn Wi-Fi on beforehand (P.158).1From the Home screen, u[Settings]u[Wi-Fi].2[Add network]uEnter the name (SSID) of the Wi-Fi network.3Tap "Security" setting itemuTap a security type of the Wi-Fi network you want to add.・Select from the 4 options: "None", "WEP", "WPA/WPA2 PSK", or "802.1x EAP"4If required, enter security information for the Wi-Fi network you want to add.5[SAVE].Using optional menu1From the Home screen, u[Settings]u[Wi-Fi]uTap .Setting up Wi-Fi1From the Home screen, u[Settings]u[Wi-Fi]uTap .RefreshP. 1 5 9More featuresInstall certificatesInstall certificates.Wi-Fi DirectP. 1 6 1WPS Push ButtonP. 1 5 9WPS PIN EntrySaved networksDisplay saved Wi-Fi networks.Network notificationSet whether to notify when Wi-Fi open network is detected.・Turn Wi-Fi on beforehand (P.158).Avoid poor connectionsSet whether to use the LTE/3G/GSM network mode when Wi-Fi radio waves are weak or communication quality is bad.Keep Wi-Fi on during sleepSet whether to disable the Wi-Fi function when the screen backlight turns off.・By default, "Only when plugged in" is set.MAC addressCheck MAC address.IP addressCheck IP address.
161SettingsUsing the Wi-Fi Direct functionYou can connect among the devices compatible with Wi-Fi Direct® via Wi-Fi even without configuring access point.・Turn Wi-Fi on beforehand (P.158).1From the Home screen, u[Settings]u[Wi-Fi].2u[More features]u[Wi-Fi Direct].3Select a Wi-Fi Direct compatible device name to connect.・Tap [SEARCH FOR DEVICES] to refresh the list of detected devices.・To change your terminal's name displayed on the detected Wi-Fi Direct compatible device, tap [RENAME DEVICE].❖Information・Wi-Fi Direct function becomes available when you install a compatible application.Check the data usage or make settings for mobile data communication.Data usageUsageDisplays the mobile data usage of the period that is set to "Billing cycle". Tap to set the warning volume of data usage.Data SaverP. 1 6 2Mobile data trafficP. 1 6 2Cellular data usageThe mobile data usage of the period that is set to "Billing cycle" can be checked with a graph.・To set the restriction of data communication in the background for each application, select the application displayed below the graph.Billing cycleP. 1 6 2Wi-Fi data usageCheck the used volume of the Wi-Fi data usage.Network restrictionsSet to restrict use of specified Wi-Fi network.
162SettingsEnabling Data saverRestrict the data communication in the background by the applications to reduce the data usage.1From the Home screen, u[Settings]u[Data usage].2[Data saver]uTap .❖Information・To set the applications to be unrestricted in Data saver, in Step 2, [Data saver]u[Unrestricted data access]uTap   of the application.Enabling/Disabling mobile data communication1From the Home screen, u[Settings]u[Data usage].2Tap   /   for "Mobile data traffic".3Read the note and tap [OK].Setting Billing cycleSet the billing period (measuring period) of data communication, or the warning volume or the upper limit of data usage amount.1From the Home screen, u[Settings]u[Data usage].2[Billing cycle].❖Information・Displayed data usage volume is an estimate. It may be different from the actual one. You can check your data usage volume at My docomo.・Note that mobile data communication will suspend when data usage volume reaches to the set limit volume.To resume the mobile data communication, on the pause screen, tap [RESUME], or drag the status bar downu[Mobile data limit reached]uTap [RESUME].Billing cycleSet the billing period (measuring period) of data communication.Set data warningSet whether to notify with a warning when the data usage reaches to the set warning volume.Data warningSet a warning volume of data usage.Set data limitSet whether to temporarily stop the data communication when the data usage reaches to the limit volume.Data limitSet a limit volume of data usage.
163Settings* Compatible with Wi-Fi CERTIFIED Miracast™Depending on usage environment, image or sound may be interrupted or stopped.Covering around the Wi-Fi antenna area with your hand may affect the quality of transferring images.In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/receiving mails), etc. are disabled.1From the Home screen, u[Settings]u[More].2Tap   for "Airplane mode".・ appears on the status bar.❖Information・Even if Airplane mode is ON, Wi-Fi, Bluetooth function and NFC Reader/Writer, P2P function can be turned on. Do not turn on these functions in a place where the use of radio wave is prohibited.Device connectionScreen mirroring*Connect to a TV or tablet compatible with Screen mirroring to display the screen on the terminal.CastDisplay the terminal's screen on a device that supports Google Cast.Media serverP. 2 0 3Keep your device's screen onSet whether to light the terminal backlight while an external device is connected.DUALSHOCK™4Set to allow a wireless controller (DUALSHOCK™4) to operate the terminal.USB ConnectivityInstall softwareSet whether to display a screen for installing software that can manage the contents of the terminal from a PC when the terminal is connected to a PC.PrintingInstall print service applications.Airplane mode
164SettingsUse tethering function to enable the terminal to use as modem to allow USB compatible devices, wireless LAN devices or Bluetooth devices to access the Internet.❖Information・If you want to use tethering, subscription to Packet Pack/packet flat-rate service is strongly recommended.・When the docomo nano UIM card is not inserted, mobile data communication is disabled, or the terminal is out of service area, USB tethering, the portable hotspot and Bluetooth tethering that use mobile network are not available.Enabling USB tethering1Connect the terminal to a PC with USB cable A to C 01 (optional) etc. (P.41).・The "Use USB to" screen appears on the terminal.・When a screen for installing driver software appears, wait for a while until the installation is complete.・When the "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL].2[USB tethering].3Tap   for "USB tethering".・When you use this function for the first time, the driver software for the terminal is installed to a PC. Wait for a while until installation is complete.❖Information・System requirements (OS) for USB tethering are as follows.- Microsoft Windows 10- Microsoft Windows 8.1- Microsoft Windows 7・In USB tethering mode, you cannot access your terminal's internal storage or microSD card from the PC.・USB tethering can be used with the portable hotspot or Bluetooth tethering at the same time.Enabling Portable hotspotYou can use the terminal as a Wi-Fi access point to connect up to 10 wireless LAN devices to the Internet simultaneously.1From the Home screen, u[Settings]u[More]u[Tethering & portable hotspot].2Tap   for "Portable hotspot".Using tethering function
165Settings❖Information・If the portable hotspot starts while connecting to Wi-Fi network, Wi-Fi connection is disconnected. Wi-Fi network is automatically connected when the portable hotspot ends.・The portable hotspot can be used with USB tethering or Bluetooth tethering at the same time.・To connect a wireless LAN device via NFC, tap [One-touch portable hotspot] in Step 2.・If you operate from [Portable hotspot settings] in Step 2u[Power save] to enable power saving, the portable hotspot turns off automatically when the specified time arrives without connecting to wireless LAN devices.Changing the portable hotspot settingsYou can change the network name (SSID), security setting, or password set by default.1From the Home screen, u[Settings]u[More]u[Tethering & portable hotspot].2[Portable hotspot settings]u[Configure hotspot].3Enter the network name (SSID) of the Wi-Fi access point you want to set.・The device name of the terminal is set by default.4Tap "Security" setting itemuTap a security type of the Wi-Fi access point you want to set.5Enter a password of the Wi-Fi access point to set as required.・By default, a password is set in a random manner.6[SAVE].Enabling Bluetooth tetheringUp to 4 Bluetooth devices can be connected to the Internet.1From the Home screen, u[Settings]u[More]u[Tethering & portable hotspot].2Tap   for "Bluetooth tethering".❖Information・To connect the terminal from a Bluetooth device, perform pairing (P.198) and operate the internet access on the Bluetooth device. For operation on a Bluetooth device, refer to the manuals of the Bluetooth device.・Bluetooth tethering can be used with USB tethering or the portable hotspot at the same time.
166SettingsUse Virtual Private Network (VPN) to connect to the information in a protected local network such as companies, schools or other facilities from outside.・To set up a VPN on the terminal, you need to retrieve the information related to security from your network administrator. For details, see the following website.http://www.sonymobile.co.jp/support/ (In Japanese only) Adding a VPN1From the Home screen, u[Settings]u[More]u[VPN].2Tap .・When the note appears, follow the onscreen instructions to set unlocking method of screen lock (P.181).3When an editing screen is displayed, follow the instruction of the network administrator to enter/set required items of VPN settings.4[SAVE].❖Information・To edit VPN, tap   of VPN in Step 2uEnter or set each itemu[SAVE].・To delete VPN, tap   of VPN in Step 2u[FORGET].Connecting to a VPN1From the Home screen, u[Settings]u[More]u[VPN].2Tap a VPN to connect to.3[CONNECT].・When you are connected to a VPN,   appears in the status bar.・If the username or the password is not entered when the VPN is added, enter the necessary informationuTap [CONNECT].Disconnecting a VPN1From the Home screen, u[Settings]u[More]u[VPN].2Tap a connected VPNu[FORGET].Connecting to a VPN (Virtual Private Network)
167SettingsAn access point for connecting to the Internet (sp-mode) is already registered. You can add or change it if necessary.For details of sp-mode, refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/service/spmode/ (in Japanese only)For using mopera U and Business mopera Internet, add the access point manually.For details on mopera U, refer to mopera U website.https://www.mopera.net/ (in Japanese only)Checking the access point in use1From the Home screen, u[Settings]u[More]u[Mobile networks]u[Access Point Names].・The radio button on the right of current access point is marked.Setting an access point additionally1From the Home screen, u[Settings]u[More]u[Mobile networks]u[Access Point Names].2Tap .・To edit the access point, tap the access point.3[Name]uEnter a nameu[OK].4[APN]uEnter an access point nameu[OK].5Tap and enter all other information required by your network operator.6u[Save].❖Information・Do not change the MCC/MNC. If you change them to the values other than the default (440/10), the access point will not be displayed on the APN screen. If the set access point is not displayed,   in Step 2uTap [Reset to default] or  , then set the access point again.・It is recommended that you use the access point that is registered by default as it is.Initializing an access point1From the Home screen, u[Settings]u[More]u[Mobile networks]u[Access Point Names].2u[Reset to default].Setting an access point
168SettingsAll network settings set to the terminal can be reset.1From the Home screen, u[Settings]u[More]u[Network settings reset].2[RESET SETTINGS]u[RESET SETTINGS].Resetting the network settingsThemes & wallpaperThemesP. 5 8WallpaperP.57, P.82DeviceDisplayP. 1 6 9NotificationsP. 1 7 0SoundP. 1 7 1AppsP. 1 7 3Storage & memoryP. 1 7 5BatteryP. 1 7 7Lock screen & securityP. 1 7 8UsersP. 1 8 5CallP.97, P.210LocationP. 1 8 6
169SettingsDisplayBrightness levelP. 1 7 0Adaptive brightnessAdjust the screen brightness automatically according to the ambient brightness with reference to the brightness set in "Brightness level".SleepSet a time for turning off of screen backlight.Smart backlight controlSet the screen backlight not to turn off when you use the terminal holding with your hand even while touch operation is not performed.・The screen backlight may turn off if the terminal remains at rest for a while even when you set Smart backlight control to ON and hold the terminal with your hand.Image enhancementSet the screen to display photos and videos vividly and at high resolution. Note that the image quality of still images can only be enhanced when viewing in the "Album" application.・Select "X-Reality for mobile" to enhance patterns and outlines so that sharp images with detailed textures are produced.・Select "Super-vivid mode" to enhance colors so that sharp, vivid images are produced.White balanceP. 1 7 0Change fontChange font.・Your terminal restarts when you change the setting.Font sizeSet font size.Display sizeEnlarge/reduce of the size of the icon etc. displayed in the screen.System iconsSelect icons to be displayed in the status bar.Screen saverSet the screensaver.When device is rotatedP. 4 6Jump to cameraSet whether to enable activation of "Camera" application by pressing O twice.Cover selectionSet to correct the screen brightness or turn off the screen backlight according to the cover (commercially available) you use.Glove modeIncrease touch sensitivity to enable touch operation with gloved hand.・Touching screen with gloved hand with Glove mode ON, a ring appears where you touch on the screen.・Depending on the material of gloves, touch operation may be difficult.
170SettingsAdjusting the screen brightness1From the Home screen, u[Settings]u[Display]u[Brightness level].2Drag the slider to the right or left.Adjusting the white balance1From the Home screen, u[Settings]u[Display]u[White balance].2Tap the slider at the position to set or drag it to the right or left.・Touch and hold the area displaying "Press and hold here to see previous setting" to check the setting before adjusting.3[DONE].❖Information・In Step 2, u[Default values]u[DONE] to reset back to the default status.Set the notifications of each application or function. Also, you can change the operation of the notification LED or the setting of notifications for the lock screen.Setting the notification of application1From the Home screen, u[Settings]u[Notifications].・Tap u[Show system] to show all applications.・To select the condition of displaying applications, tap [All apps] in the upper part of the screen.2Tap an application.・Drag the screen up or down to display the scroll bar in the right end of the screen, and then drag the scroll bar up or down. The index character appears in a pop-up and you can search the application by the index character.NotificationsBlock allSet to block the all notifications.Sound and vibrations offSet to notify only with the display of notifications.On the lock screen*1Set whether to display the notifications on the lock screen.Interrupts Priority onlySet whether to notify with sound when Do not disturb function *2 is set to "Priority only".
171Settings*1 Displayed when the screen lock unlocking method is set to "Pattern"/"PIN"/"Password".*2 Set from the quick setting tool of the quick settings panel (P.54). Before using, tap   and set "Do not disturb" as an available quick setting tool.❖Information・The items that can be set vary depending on the settings of the terminal or application/function.・To reset the settings for the application, tap   in Step 2u[Reset app references] (P.175).Changing the notification settings1From the Home screen, u[Settings]u[Notifications].2Tap .* Displayed items that are displayed vary depending on the settings of "Screen lock" (P.181).Notification lightSet whether to notify missed calls etc. with blinking notification LED (P.50).On the lock screenSet whether to show notification details on the lock screen.*Keep notification on lockscreenSet whether to keep the notification content displayed on the lock screen when you have any notifications.SoundAudio settingsDSEE HXSet whether to reproduce sound with the quality equivalent to high-resolution audio when playing back compressed music files. This feature works only when the headphone that support high-resolution audio is connected to the headset jack.ClearAudio+The sound setting for music recommended by Sony. It helps optimize the settings for digital signal processing technology with a one-touch operation.Sound effectsSet sound effects.Dynamic normalizerSet to play at a comparable volume when songs with different volume levels are played.
172Settings* Set from the quick setting tool of the Quick settings panel (P.54). Before using, tap   and set "Do not disturb" to the available quick setting tool.❖Information・For silent mode, see "Setting silent mode" (P.46).Accessory settingsAutomatic optimizationOptimize sound quality by analyzing characteristics of a connected headphone and acoustic sense.Noise cancelingReduce background noise by turning on the noise-canceling function. The setting can be made when the noise-canceling headphones are connected.LDAC playback qualitySet to use LDAC compatible device for playback of high sound quality audio. The setting can be made when LDAC device is connected.Mic sensitivitySet the microphone sensitivity.Media volumeP. 1 7 3Alarm volumeRing volumeAlso vibrate for callsSet whether to vibrate the terminal when receiving a call.Do not disturbAllowed in Priority onlySet the type of notification priority to notify when Do not disturb function * is set to "Priority only".Automatic rulesSet rules to activate the Do not disturb function* automatically at the specified day of week and time or the scheduled date and time registered in "Calendar" application.Block visual disturbancesSet whether to restrict the notification operations such as the pop-up, turning on of the screen backlight, or turning on/off of the notification LED when the Do not disturb function* is set.Phone ringtoneP. 1 7 3Notification soundDefault alarm ringtoneOther soundsSet Dialpad tones/Screen locking sounds/Touch sounds/Vibrate on touch.
173SettingsAdjusting sound volumesAdjust the volumes for playing media, alarm, ringtone and notification sounds.1From the Home screen, u[Settings]u[Sound].2Drag the slider of "Media volume"/"Alarm volume"/"Ring volume" left or right.❖Information・The alarm volume set via the "Clock" application has precedence (P.153).・You can also press the volume key to adjust the ringtone volume. Pressing the volume key or O mutes ringtone for incoming calls.Setting the ringtone/notification sound/alarm ringtone1From the Home screen, u[Settings]u[Sound].2Tap any of [Phone ringtone]/[Notification sound]/[Default alarm ringtone].3Select the soundu[DONE].❖Information・To set a ringtone, notification sound, alarm ringtone other than the ones stored by default, tap   in Step 3.・When the sound is selected in Step 3, it sounds with the volume set in "Ring volume" or "Alarm volume". However, if the volume is set to 0, it does not sound.Manage and uninstall installed applications. Also, show memory usage status or change the settings.Managing applications1From the Home screen, u[Settings]u[Apps].・Tap u[Show system] to show all applications.・To select the condition of displaying applications, tap [All apps] in the upper part of the screen.2Tap an application.・Drag the screen up or down to display the scroll bar in the right end of the screen, and then drag the scroll bar up or down. The index character appears in a pop-up and you can search the application by the index character.AppsUNINSTALL/DISABLEP.174, P.175FORCE STOPP. 1 7 4StorageClear data or cache.Data usageCheck data usage amount.
174Settings❖Information・Tap   in Step 2 to set Preferred apps settings, App permissions, App links, default application setting, etc.・The displayed items may differ or the item may not be selected depending on application or usage condition.Force-quitting an application1From the Home screen, u[Settings]u[Apps].・Tap u[Show system] to show all applications.2Tap the application to force-stop.3[FORCE STOP]uRead the notes and tap [OK].Uninstalling applications・Before uninstalling application, back up contents you want to save including data saved in the application.1From the Home screen, u[Settings]u[Apps].2Tap the application to uninstall.3[UNINSTALL]u[OK].❖Information・Some pre-installed applications may not be uninstalled. For some applications which cannot be uninstalled, disabling is possible (P.175).・Applications downloaded from Google Play are recommended to be uninstalled from the Google Play screen (P.121).・In Step 3, tap uIf [UNINSTALL UPDATES] is displayed, you can restore the application to the default.PermissionsChange access authorization setting.NotificationsChange notification setting.Open by defaultClear the setting of default application.BatteryCheck the battery use condition after the previous full-charging.MemoryCheck memory usage amount.
175SettingsDisabling applicationYou can disable services or applications that cannot be uninstalled.・Disabled applications are not displayed on the Home screen or application screen and you cannot execute them, but they are not uninstalled.1From the Home screen, u[Settings]u[Apps].・Tap u[Show system] to show all applications.2Tap the application to disable.3[DISABLE]uRead the notes and tap [DISABLE APP].❖Information・When you disabled an application, some other applications linked to the disabled application may not be operated correctly. Enable the disabled application again to operate them correctly.Resetting applicationsYou can reset the disabled applications (P.175), the default applications (P.173), and the restriction of background data (P.161).1From the Home screen, u[Settings]u[Apps].2u[Reset app preferences].3[RESET APPS].Optimize the storage and memory, transfer data, or uninstall applications to improve operations of the terminal or make available memory space for the internal storage.* Only data in specific folders stored in the internal storage will be transferred to the microSD card.❖Information・To set applications for not clearing cache by Smart cleaner, from the Home screen, u[Settings]u[Storage & memory]uu[Advanced]u[Keep cache]uTap "APPS" tabuMark applications to be set.Storage & memoryStorage usageThe storage usage is displayed. Tap to check the details of the storage usage, or initialize the microSD card/USB storage (formatting) (P.176).Smart cleanerSet whether to optimize the storage and memory automatically depending on use frequency.Transfer data*Transfer data in the internal storage to the microSD card.Free up spaceSelect files to delete or applications to uninstall.
176SettingsViewing the storage use conditionCheck memory volume of the internal storage, microSD card, USB storage, or format microSD card or USB storage.1From the Home screen, u[Settings]u[Storage & memory].2[Storage usage].・Alternatively, u[Advanced]u[Storage].*1 Displayed items vary depending on condition of microSD card or USB storage recognition.*2 Only data in specific folders stored in the internal storage will be transferred to the microSD card.❖Information・After the operation in Step 2, [Internal shared storage]u[Explore], or tap [SD Card]/[USB drive] to display the data list, you can check the saved data or copy/move/delete/share the data (P.195).・To release the recognition of microSD card/USB storage, tap   of "SD Card"/"USB drive" after the operation in Step 2. To recognize again, tap [SD Card]/[USB drive]u[MOUNT].・To format a microSD card/USB storage, tap [SD Card]/[USB drive] after the operation in Step 2uu[Storage settings]u[Format]u[ERASE & FORMAT].Be aware that formatting will erase all their data.Checking the condition of memory usageCheck the average memory use of the applications installed to the terminal.1From the Home screen, u[Settings]u[Storage & memory].2u[Advanced]u[Memory].❖Information・To change the period, tap any of [3 hours]/[6 hours]/[12 hours]/[1 day] at the upper screen.XX.XX GB (Total used of 32.00 GB)Used memory and total memory of the internal storage is displayed.Internal shared storage*1Total memory and used memory of the internal storage is displayed.SD Card*1Total memory and used memory of microSD card is displayed.USB drive*1Total memory and used memory of USB storage is displayed.Transfer data to SD card*1*2Transfer data in the internal storage to the microSD card.Average memory useAverage memory use for a specified period is displayed.Memory used by appsCheck memory use by application/function for a specified period.
177Settings❖Information・To reduce battery power for each application, disable applications when the terminal is not used or the applications are not used for several days (Battery optimization).To avoid the effect of the battery optimization against the application, register the applications to "NOT OPTIMIZED".To change the battery optimization setting, from the Home screen, u[Settings]u[Battery]uu[Battery optimization]uTap "APPS"/"ALL OTHERS" tabuMark applications to set.・To manage the applications consuming the battery to reduce the battery consumption, operate from the Home screen, u[Settings]u[Battery]uuTap [App power consumption].BatteryBattery level and estimated battery timeThe battery level and remaining standby time (estimate) are displayed. Tap [SHOW BATTERY USAGE] to check remaining battery and applications/functions that use the battery from the last full-charging.STAMINA modeRestrict the operations and a part of functions of the terminal to save the battery power.・Select "Auto start at XX% battery" to set to enable STAMINA mode when the battery level becomes to a specified level. Tap   to specify a battery level to enable the function.・Tap [STAMINA level] to set restriction level.・Turn on the "Smart STAMINA notification" to notify you with the notification when there is not enough battery until the next charging is predicted.・The remaining standby time is displayed in "Battery level and estimated battery time" linking with the STAMINA mode settings.Emergency modeP. 4 8Battery CareP. 3 7
178Settings*1 Not displayed if a docomo nano UIM card is not inserted.*2 Save certificates and credential information in the credential storage.*3 VPN settings are also cleared.Lock screen & securityScreen lockP. 1 8 1Fingerprint ManagerP. 1 8 2Smart LockSet to enable unlocking by the On-body detection or registered trusted places/devices/face/voice when Screen lock is set to "Pattern"/"PIN"/"Password".Lock screen messageEnter a message to be displayed on the lock screen.ClocksSet a clock for the lock screen.Configure notificationsP. 1 7 1Encrypt deviceThe internal storage is encrypted by default.Set up SIM card lock*1P. 1 8 1Make passwords visibleSet whether to show the input character before "●" appears on the PIN/password entry screen.Device administratorsSet whether to enable device administrating function.Unknown sourcesSet whether to permit installing an application by unknown source (provider) before downloading.To protect the terminal and personal data, only download applications from trusted sources.Storage typeShow type of credential storage.Trusted credentialsDisplay trusted CA credentials.User credentialsManage the user credentials saved in the terminal.Install from device memory/SD cardInstall encrypted certificates.Clear credentialsClear all certificates or credential information from the credential storage.*2* 3Trust agentsSet whether to display trusted agents.Screen pinningSet whether to enable screen pinning. When this feature is on,  is displayed in a thumbnail of the recently-used application (P.70).Apps with usage accessSet whether to allow applications which read usage history to permit access to usage history.
179SettingsSecurity codes for the terminalSome functions provided for convenient use of the terminal require the security code to use them. Besides the security code for locking the terminal, the network security code necessary for the network services etc. are available. Make use of the terminal using an appropriate security code according to the purpose.■ Notes on the security codes・Avoid using a number that is easy to guess, such as "birth date", "part of your phone number", "street address number or room number", "1111", and "1234". Make sure to make a note of the security code you set lest you should forget it.・Be very careful not to let others know your security code. If your security code is known by anyone else, DOCOMO shall have no liability for any loss due to any unauthorized use of it.・If you forget your security codes, you must bring your official identification (such as driver's license), the terminal, and docomo nano UIM card with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page.・The PIN Unlock Key is written on the subscription form (copy for customer) handed at the subscription in the docomo Shop. If you subscribed other than docomo Shop, you must bring your official identification (such as driver's license), the docomo nano UIM card with you to the nearest docomo Shop or contact the "General Inquiries" on the last page.■ Network security codeThe network security code is a 4-digit number necessary for identification or using the docomo network services at reception of your request in docomo Shop, or at docomo Information Center or "お客様サポート (Customer support)". It can be set any number at the subscription and also changed later by yourself.・For details on network security code, refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/english/support/trouble/password/network/
180Settings■ PIN codeYou can set up a security code called a PIN code for your docomo nano UIM card. The code is set to "0000" at the time of subscription; however, you can change the code by yourself.PIN code is a 4- to 8-digit security number (code) that must be entered for user confirmation to prevent unauthorized use of docomo nano UIM card by a third party every time you insert the docomo nano UIM card into the terminal or when the terminal is powered on. Entering the PIN code enables making/receiving calls and terminal operation.・If you use a newly purchased terminal with docomo nano UIM card you have been using, use the PIN code set on the former terminal. If you did not change the setting, the code is "0000".・If you enter a wrong PIN code 3 times consecutively, the PIN code is locked and cannot be used anymore. In this case, unlock with "PIN Unlock Key (PUK code)" (P.180).■ PIN Unlock Key (PUK code)The PUK code is an 8-digit number for canceling the locked PIN code. The PUK code cannot be changed by yourself.・If you failed to enter PUK code 10 times consecutively, the docomo nano UIM card is locked. Please contact a docomo Shop.■ d ACCOUNTd ACCOUNT is an ID/password to use applications or services provided by DOCOMO. With d ACCOUNT, you can use various services more convenient regardless of line type such as LTE, Wi-Fi, etc., or device type such as smartphone, tablet, PC.・For details on d ACCOUNT, from the Home screen, u[Settings]u[docomo service/cloud]u[d ACCOUNT setting]uu[ヘルプ (Help)] to see the Help.■ Google accountGoogle account is an ID/password to use Google services. By setting Google account to the terminal, you can use Gmail to send Email, use Google Play to download applications or contents such as games.・For setup of Google account, see "Setting up a Google account" (P.187).
181SettingsEnabling SIM card lockBy entering PIN code when powered on, you can protect from improper use.1From the Home screen, u[Settings]u[Lock screen & security]u[Set up SIM card lock]u[Lock SIM card].2Enter PIN codeu[OK].Entering the PIN code when powered on1On the PIN code entry screen, enter the PIN code.2Tap .Changing the PIN code・You can change only when you activate the SIM card lock.1From the Home screen, u[Settings]u[Lock screen & security]u[Set up SIM card lock]u[Change SIM PIN].2Enter the current PIN codeu[OK].3Enter a new PIN codeu[OK].4Enter the new PIN code againu[OK].Unlocking PIN lock1Enter the PUK codeuTap .2Enter a new PIN codeuTap .3Enter the PIN code againuTap .Setting screen unlock methodFor reinforcing security, you can set the terminal to require the entry of a pattern, PIN, or password to cancel the screen lock every time the terminal is turned on or woken from sleep mode.1From the Home screen, u[Settings]u[Lock screen & security]u[Screen lock].2Tap any of [Pattern]/[PIN]/[Password].3Follow the onscreen instructions to set.・Set whether to require entry of the specified unlocking method every time you turn on the power of the terminal.・When the setting is complete, "Lock screen & security" menu screen reappears.・If you select "PIN", enter 4- to 16-digit of numeric characters. If you select "Password", enter 4- to 16-digit alphanumeric characters.
182Settings4Tap   of "Screen lock" as required.* Appeared only when the "Pattern" is set.Locking the screenOnce you specify the screen unlock method (P.181), the screen is locked when you press O to put the terminal into sleep mode or when the backlight turns off automatically.■ To unlock the screen1When the screen is locked, press O to turn the backlight onuSwipe (or flick) up/left on the screenuEnter the unlock PIN, pattern, or password.■ To turn off the screen lock1From the Home screen, u[Settings]u[Lock screen & security]u[Screen lock]uEnter the current unlock pattern, PIN, or passwordu[None]u[YES, REMOVE].❖Information・Entering incorrect pattern/PIN/password 5 times consecutively disables canceling the screen lock. Wait for approximately 30 seconds and then operate the canceling of screen lock again.・If you forget unlocking pattern/PIN/Password, contact a docomo Shop.Setting up fingerprint authenticationYour terminal features a fingerprint sensor (O). Once you register your fingerprint for O, you can touch the key with your finger to unlock the screen (fingerprint authentication).■ Notes on using fingerprint authentication・Your terminal recognizes a fingerprint based on its unique characteristics. For this reason, some users may not be able to use fingerprint authentication if their fingerprints are not sufficiently unique.Make pattern visible*Set whether to show pattern when entering pattern.Automatically lockSet the time from when the screen backlight turns off to when the screen automatically locks.Power button instantly locksSet whether to instantly lock the screen when the screen backlight is turned off by pressing O.
183Settings・Authentication performance—how successfully your fingerprint can be recognized when you touch the fingerprint sensor (O) properly—varies depending on the condition of your fingers. Fingerprint registration may fail or the authentication performance may decrease if your fingers have any of the conditions listed below. Note that you may be able to improve the authentication performance by wiping or washing your hands, using a different finger for authentication, or registering a larger area of your fingerprint.- Your fingers are: Wrinkled or wet (for example, after you take a bath)- Sweaty or greasy (with hand cream etc.)- Dirty with mud, oil, or other contamination- Rough or injured (for example, cut or inflamed)- Extremely dry- Different in size than before, so that the fingerprint has changed- Worn so much that the fingerprint is unclear- Totally different in texture than when you registered your fingerprint・Fingerprint authentication technology does not guarantee completely accurate personal authentication or identification. Please note that DOCOMO assumes no responsibility for any damages resulting from using the terminal by the third party, or inability to use the terminal.■ Precautions for using the fingerprint sensor (O)・Do not hit the fingerprint sensor against anything or subject it to any strong impact. Also, do not scratch its surface or poke it with a pointed object. Doing so may damage the sensor or cause it to fail.・Do not put a sticker on the fingerprint sensor or paint it with ink or something similar.・A dirty sensor can make fingerprint recognition difficult or reduce authentication performance. Be sure to clean the surface of the sensor as needed.
184Settings■ Registering your fingerprint1From the Home screen, u[Settings]u[Lock screen & security]u[Fingerprint Manager].・If you have already registered fingerprint, the entry screen for unlocking the screen lock appears. Enter the unlocking method to display the fingerprint setting screen.2[NEXT].・After this step, follow the onscreen instructions. When the registration is complete, the screen that notifies the fingerprint is added appears. Tap [DONE] to end the registration or tap [Add another] to register the other fingerprint.・When the screen for setting the unlocking method of the screen lock appears, follow onscreen instructions to set. Use the selected unlocking method if fingerprint authentication does not work.・When the entry screen for unlocking the screen lock appears, enter the set unlock method and then follow onscreen instructions.❖Information・On the Fingerprint Manager screen, you can perform the following actions:- To rename a fingerprint, tap a registered fingerprintuEnter a nameuTap [OK].- To delete a fingerprint, tap a registered fingerprintu[DELETE]u[DELETE].- To register the other fingerprint, tap [Add fingerprint].■ Using your fingerprint for authentication1When the lock screen is displayed, press O .・Touch O with your registered finger.・Swipe (or flick) up/left on the lock screen to display a screen for entering unlocking screen method you set.❖Information・If fingerprint authentication failed 5 times consecutively, the fingerprint authentication is disabled. Wait for a while and then perform fingerprint authentication, or swipe (or flick) the screen and then enter the unlocking screen method that you set.
185SettingsAdd users to share the terminal with multiple users (function that allows users and guests to use the terminal).To switch users or add a guest, operate from the Quick settings panel (P.54).❖Information・You can add up to 5 users including an owner and users.・When using the terminal by the owner, tap   for "(User Name)" or   for "New user" to set whether to permit use of phone and SMS, or remove the user.・When the owner is Users/Guest, displayed functions are different, or use of applications or functions are restricted.UsersYou (Owner)Check or edit profile information.GuestSet whether to allow a guest to use the phone by tapping   while the owner uses the terminal.・When a "guest" is using the terminal, "Remove guest" is displayed. You can tap it to delete the applications and data that the guest has used.+ Add userSelect this to add users. You need to configure initial settings for each added user. Follow the onscreen instructions.・When an added user is using the terminal, "You (the name set for the user's Google account)" is displayed.・If you tap "NOT NOW" in the user initial setting, "New user" is added.Add usersSet whether to add a guest or user from the Quick settings panel (P.54) when the unlocking method of the screen lock is "Pattern"/"PIN"/"Password".Emergency informationRegister your blood type or the other information that can be useful for initial response in emergency or the contacts for emergency.・You can also register or check the emergency information in "Contacts" application.
186Settings1From the Home screen, u[Settings]u[Location].2Tap .3Read the notes on location information and tap [AGREE].・When a screen for asking whether to improve location information is displayed, follow the onscreen instructions to operate.❖Information・ in Step 2u[Scanning]uTap   for "Wi-Fi scanning"/"Bluetooth scanning" to allow the system application or services to detect Wi-Fi network/Bluetooth devices and then improve accuracy of location information.LocationModeSet a mode to identify location information.Recent location requestsDisplay the application using the recent location information data.Location servicesSet or check Google Location History.・You may need to set a Google account.Accounts & servicesdocomo service/cloudP. 1 8 6Accounts & syncP. 1 8 7GoogleP. 1 8 8Backup & resetP. 1 8 9docomo service/cloudd ACCOUNT settingSet up your d ACCOUNT to use docomo applications. You can also use your biological information (fingerprint) registered on the terminal to set up your d ACCOUNT.docomo cloudMake settings for docomo cloud compatible service.docomo apps managementManage to install applications provided by DOCOMO and set to check updates for applications regularly.Osusume hintSet whether to display Osusume hint, check hints displayed in the past, etc.AUTO-GPSSet to use the services supporting AUTO-GPS.docomo location informationSet location information function for imadoco search, imadoco kantan search and Keitai-Osagashi Service.
187Settings❖Information・You can disable applications displayed in docomo service/cloud. Disabled applications may not be displayed in the list of docomo service. Also, if you newly download an application provided by DOCOMO, an item may be added in the list of docomo service/cloud.Manage (add or delete) online service accounts or synchronize contacts, calendar, etc. saved in online services with the terminal.・Auto-sync data (P.188)Setting up a Google accountYou can set a Google account on your terminal and use Google services such as Gmail, Google Play, etc.You can set multiple Google accounts on the terminal.1From the Home screen, u[Settings]u[Account & sync]u[Add account]u[Google].2Follow the onscreen instructions to set up a Google account.❖Information・If you turn on the item for backing up data to your Google account on the "Google services" screen when registering, the account is registered as a backup account.・You can use the terminal without setting your Google account, however the Google services such as Gmail, Google Play, etc. are not available.・Tap a Google account to set ON/OFF of auto sync for each item.Profile settingCheck or change your profile information used for docomo services.docomo service initial settingsP. 4 3Switch USB debuggingMake the settings for using the dedicated terminal at a docomo Shop etc.Open source licensesView open source licenses.Account & sync
188SettingsSetting other account1From the Home screen, u[Settings]u[Account & sync]u[Add account].2Tap an account type.・After this step, follow the onscreen instructions.❖Information・docomo account is set by default.Removing account1From the Home screen, u[Settings]u[Account & sync]uSelect an account typeuSelect the account as required.2u[Remove account]u[REMOVE ACCOUNT].❖Information・You cannot remove the docomo account.Configuring sync settings for your accounts■ To sync automaticallySynchronize information of online service with the terminal. You can display and edit information on the terminal or a PC.・Setting Auto-sync data, communication occurs to synchronize and a packet communication charge may be applied.1From the Home screen, u[Settings]u[Account & sync].2u[Auto-sync data]u[OK].■ To sync manuallyWhen the auto-sync function is off, you can sync your registered account(s) manually.1From the Home screen, u[Settings]u[Account & sync].2Select the account typeuSelect an account as requireduSelect items to sync.Check, change, or delete information or settings related to your Google account and the services.Google
189SettingsResetting the terminalResetting the terminal deletes all data and accounts, and resets the terminal back to the initial (default) state.・The downloaded applications and data in the internal storage (music, images, etc.) are included to the data to be deleted.・Make sure to back up the important data you have on the terminal before resetting.・Reset the terminal while charging the battery, or when the battery is sufficiently charged.・Initial settings (P.43).1From the Home screen, u[Settings]u[Backup & reset]u[Factory data reset]u[RESET PHONE].2[ERASE EVERYTHING].❖Information・Some pre-installed content can be re-downloaded, even if it is deleted when you reset your terminal.To download, from the Home screen, u[Xperia™ Lounge Japan]uu[サポート  (ブラウザで開きます)(Support (Open the window by the browser))]u[スマートフォン/タブレット関連(プリインストールコンテンツなどの再ダウンロード) (For smartphone/tablet (For re-downloading preinstalled contents))]u[ドコモ (DOCOMO)] (in Japanese only) and then select the terminal on the displayed screen.Backup & resetBack up my dataSet whether to back up settings for applications, data, etc. to Google server.Backup accountSet an account for backup to Google server.Automatic restoreSet to restore the backup settings or data when re-installing application.Factory data resetP. 1 8 9
190SettingsCheck the introduction of the function of the terminal, customize the terminal, set data protection, etc. Also, you can make settings for displaying the hints of the terminal, the operations performed automatically by the terminal and the battery or memory.*1 If the screen for selecting the previous mobile phone, select the type of the mobile phone. The screen of the introduction of Xperia™ appears and you can select the item.*2 The items vary depending on the selected previous mobile phone. To change a mobile phone type, in the Xperia™ introduction screen, uTap [Select phone].SystemAssistP. 1 9 0Date & timeP. 1 9 1Languages & inputP. 1 9 1AccessibilityP. 1 9 3About phoneP. 1 9 4AssistIntroduction to Xperia™*1Essentials*2Check the latest applications/functions.Learn the basics*2Check the basic function of Android and Xperia™.Make it yoursCustomize the theme or wallpaper, lock screen clock, ringtone, notification sound.Keep your stuff secureSet up fingerprint function (P.182) or Backup and restore settings (P.189).Xperia™ servicesSign in for using Xperia™ services.Xperia™ TipsSet whether to notify you of convenient functions for the terminal with notification.Xperia™ ActionsSet the operations that the terminal can operate automatically when you are sleeping or want to concentrate, or overseas.STAMINA modeSet STAMINA mode (P.177).Smart cleanerSet Smart cleaner (P.175).Battery CareSet Battery Care (P.37).
191Settings・To set date/time or time zone manually, turn off "Automatic date & time" or "Automatic time zone" in advance.❖Information・Correction of the time differences may not be performed correctly depending on the overseas network operator. In that case, set time zone manually.Date & timeAutomatic date & timeAdjust date and time automatically by using network-provided information.Automatic time zoneAdjust time zone automatically by using network-provided information.Set dateSet date manually.Set timeSet time manually.Select time zoneSet time zone manually.Use 24-hour formatSet whether to use 24-hours format.Languages & inputLanguagesP. 1 9 2On-screen keyboardSwiftKey Keyboard*1Make settings of SwiftKey Keyboard.Xperia™ Japanese keyboardP. 7 9Google voice typingMoji-HenshuManage keyboardSet the software keyboards to display on the screen for changing the software keyboard (P.73).Physical keyboardShow on-screen keyboardSet whether to display the software keyboard on the terminal screen when entering characters with a peripheral keyboard connected to the terminal.Keyboard shortcuts helperDisplay the available shortcuts that can be used on the peripheral keyboard connected to the terminal.Spell checker*2Set whether to run the spell checker.Personal dictionaryAdd words used in the spell checker and other applications.Text-to-speech outputP. 1 9 2
192Settings*1 Displayed when the language is set to English.*2 Downloading a spell checker application is required.Changing the phone language1From the Home screen, u[Settings]u[Languages & input]u[Languages].2[Add a language]uSelect the languageuSelect the country or region as required.3Drag   of the language to the top layer ("1" position).❖Information・If you choose the wrong language and cannot read the menu texts, see the FAQ of the following website.http://www.sonymobile.co.jp/support/ (In Japanese only)Setting Text-to-speech output1From the Home screen, u[Settings]u[Languages & input]u[Text-to-speech output].Pointer speedSet pointer speed when a mouse or trackpad is used.Google Text-to-speech EngineSet the language or the Google Text-to-speech engine, or install the voice data.Speech rateSet speed at reading out text.PitchSet the pitch of voice to read out text.Reset speech rateReset the setting of "Speech rate" to the normal speed.Reset speech pitchReset the setting of "Pitch" to the default pitch.Listen to an examplePlayback sample of audio synthesis.Default language statusDisplay the supporting status of the language set for text-to-speech.
193Settings*1 It may not work correctly.*2 If the terminal goes into sleep mode during a call with "Power button ends call" turned on, you can end the call by pressing O or the volume key to wake the terminal and then pressing O again.AccessibilityOsusume hintSet whether to use Osusume hint function that introduces how to use the terminal according to your operations or usage conditions.・Use setting is required in advance (P.186).CaptionsSet whether to display the captions or set the language, font size for captions.Mono audioSet whether to play sound with monaural.Magnification gestureSet whether to enable zooming in/out by tapping the screen 3 times.Font sizeSet font size.Display sizeEnlarge/reduce of the size of the icon etc. displayed in the screen.Large mouse pointerSet whether to enlarge the pointer when using the mouse.High contrast text*1Set whether to show font with high contrast color against the background color.Color inversion*1Set whether to invert color of screen.Color correction*1Correct color when distinguishing colors is difficult.Speak passwordsSet whether to read out passwords.Text-to-speech outputP. 1 9 2Click after mouse pointer stops movingSet whether to click when the mouse pointer stops while using a mouse.Power button ends call*2Set whether to end calls by pressing O.Auto-rotate screenP. 4 6Accessibility shortcutSet whether to enable activation of accessibility function using shortcuts.Touch & hold delaySet response time for operation of touching and holding the screen.
194SettingsAbout phoneSoftware UpdateP. 2 2 6StatusCheck own phone number, battery status, remaining battery, battery performance, etc.Legal informationCheck open source license or Google terms of use, etc.CertificatesP. 2 3 4Usage info settingsSet whether to send usage information for the terminal.ModelCheck versions, numbers, etc.Android™ versionAndroid security patch levelBaseband versionKernel versionBuild number
195File managementFile managementFolders in the internal storage (/storage/emulated/0) by default are as follows.・Displayed folders may differ depending on the terminal operations.You can save data in the terminal to a microSD card or import data from the microSD card to the terminal.・For installing/removing a microSD card (P.34)Use "File manager" application to operate various data saved in the internal storage or the microSD card.1From the Home screen, u[File manager].・The internal storage of the terminal is displayed. Tap   to display the menu.・When a microSD card is installed, "SD Card" appears in the menu.2Tap the folder as required.3Tap a file.・Data can be displayed with the compatible application.❖Information・To search data, tap   in Step 2 and enter a file name, then tap   of the software keyboard.Storage structurePhone (Internal storage)AlarmsStores alarm sounds etc.AndroidStores setting data for system or each application, temporary files, etc.DCIMStores still pictures/videos shot by Camera.DownloadStores downloaded data through the web browser.MoviesStores videos (except shots by Camera).MusicStores music data.NotificationsStores notification sounds etc.PicturesStores still pictures (except shots by Camera).PodcastsStores Podcast files etc.RingtonesStores ringtones etc.microSD card (External storage)File operations
196File management■ Creating a folder1From the Home screen, u[File manager].2Tap the folder as required.3u[New folder].4Enter a folder nameu[OK].■ Renaming folder or file1From the Home screen, u[File manager].2Tap the folder as required.3Touch and hold a folder or file you want to rename.4u[Rename]uEnter a nameu[OK].■ Deleting a folder or file1From the Home screen, u[File manager].2Tap the folder as required.3Touch and hold a folder or file you want to delete.4u[OK].■ Copying/Moving a folder or file1From the Home screen, u[File manager].2Tap the folder as required.3Touch and hold a folder or file you want to copy/move.4u[Copy to...]/[Move to...].5In the desired location, [COPY]/[MOVE].
197Data communicationData communicationBluetooth function is a technology which enables to connect with Bluetooth device such as PC, handsfree headset wirelessly.・The terminal does not communicate wirelessly with all types of Bluetooth devices.・Supported Bluetooth profiles (P.230)❖Information・If you turn off the terminal with Bluetooth turned on, Bluetooth function turns off. When you turn on the terminal again, Bluetooth function turns on automatically.・When you do not use Bluetooth function, turn it off to save the battery.■ Reception interference caused by wireless LAN devicesThe terminal's Bluetooth function and wireless LAN devices use the same frequency band (2.4GHz). If you use the terminal near a wireless LAN device, reception interference may occur or the communications speed may lower. Also, you may hear noise or have a connection problem. In these cases, do the following:・Keep the Bluetooth device approximately 10 m or more away from a wireless LAN device.・Within approximately 10 m, turn off either the Bluetooth device or the wireless LAN device.1From the Home screen, u[Settings].2[Bluetooth]uTap .・ appears on the status bar.Using optional menu1From the Home screen, u[Settings]u[Bluetooth]uTap .Bluetooth functionMaking the terminal detectableRefreshSearch available devices again.Rename this deviceRename the terminal which appears on other Bluetooth devices.Show received filesDisplay transfer history with other Bluetooth devices.
198Data communicationTo connect the terminal and Bluetooth device, pair them first.・Once paired, the setting with the Bluetooth device is saved.・For make pair setting, entering passcode (PIN) may be required. Passcode (PIN) of the terminal is "0000". If you cannot make pair setting when you enter "0000", see the documentation of your Bluetooth device.・Make sure that the Bluetooth function and Bluetooth detection function of the target device are on in advance.1From the Home screen, u[Settings]u[Bluetooth].・Detected Bluetooth devices are displayed in "Available devices".2Tap a name of Bluetooth device for pairing.3Confirm the Bluetooth pairing code (pass code) on the confirmation screenu[PAIR].・Paired Bluetooth devices are displayed in "Paired devices".■ When pairing request is sent from a Bluetooth deviceConfirm the Bluetooth pairing code (pass code) on the confirmation screen and then tap [PAIR].❖Information・To unpair, tap   for the Bluetooth device to be unpairedu[FORGET].1From the Home screen, u[Settings]u[Bluetooth].2Tap a name of Bluetooth device to connect.❖Information・To rename a Bluetooth device, tap   for Bluetooth device you want to change the nameuEnter a nameuTap [OK ].・Up to 7 devices can be connected at the same time. Depending on profile, operation may not be correct or number of devices that can be connected at the same time may be different.Disconnecting a Bluetooth device1From the Home screen, u[Settings]u[Bluetooth].2Tap a name of connected Bluetooth device.Making pair setting for the terminal and Bluetooth deviceConnecting the terminal with a Bluetooth device
199Data communication3[OK].・To reconnect, tap the Bluetooth device name.Turn on Bluetooth function in advance, then pair with a target Bluetooth device.Sending data via Bluetooth function1[Bluetooth] from the sharing menu of each application.2Tap the other Bluetooth device.Receiving data1Send data from the other Bluetooth device.・ appears on the status bar.2Drag the status bar downwardsu[Incoming file]u[ACCEPT].You can send/receive data to/from a device with NFC such as a mobile phone.・To send/receive data, enable NFC Reader/Writer, P2P function in advance (P.200).・Hold 2 terminals in parallel and place NFC / Osaifu-Keitai position for holding over face to face. Do not move them until sending/receiving is complete.・NFC / Osaifu-Keitai position for holding over differs depending on mobile phone.Check NFC / Osaifu-Keitai position for holding over (  mark) on each mobile phone.・Operations to send/receive and available data to send/receive depend on the compatible applications. Follow the onscreen instructions.Sending/Receiving data via Bluetooth functionNFC communication
200Data communication・Even if NFC / Osaifu-Keitai position for holding over is placed face to face, sending/receiving may fail. In such case, operate again to send/receive.・The terminal does not communicate with all NFC devices.・For notes when holding over the other device (P.123).1From the Home screen, u[Settings]u[More].2[NFC / Osaifu-Keitai settings]uTap  of "Reader/Writer, P2P"u[OK].・"Reader/Writer, P2P" and "Android Beam" are turned on.・ appears on the status bar.❖Information・While "NFC / Osaifu-Keitai lock" is set, the NFC Reader/Writer, P2P function cannot be turned on.By using the Android Beam with a NFC compatible Android device, you can send or receive images, music, photos or videos taken with the terminal with simple operations.・Turn on Reader/Writer, P2P function in advance (P.200).Sending data1Display data to send on the screen.2Place the NFC / Osaifu-Keitai positions for holding over face to face with a mobile phone for receiving (P.123).・"Tap your screen to beam" appears.3Tap the shrunk screen.Enabling NFC Reader/Writer, P2P functionSending/Receiving data by one-touch function
201Data communicationReceiving data1Perform data sending operation on a sender's terminal.2Place the NFC / Osaifu-Keitai positions for holding over face to face with a mobile phone for sending (P.123).・When you receive data,   appears on the status bar. Drag the status bar downwardsuTap [Beam complete] to launch the application associated with the received data. Follow the onscreen instructions.Selecting NFC Type1From the Home screen, u[Settings]u[More].2[NFC / Osaifu-Keitai settings]u[NFC Type].3Tap any of [FeliCa / Type A / Type B (standard)]/[FeliCa / Type A]/[FeliCa / Type B].
202External device connectionExternal device connectionConnect to a PC to exchange data between the internal storage or the microSD card and a PC.❖Information・Appeared screen may vary depending on the operating system (OS) of a PC.・You may not be able to operate copyrighted data of images, music, etc.・The following operating systems (OS) are supported.- Microsoft Windows 10- Microsoft Windows 8.1- Microsoft Windows 7・To operate on Mac, downloading "Xperia Companion" is required.For details on compatible models or recommended system, see the following website.http://www.sonymobile.co.jp/support/software/xperia-companion/ (in Japanese only)1Connect the terminal to a PC with USB cable A to C 01 (optional) etc. (P.41).・When a screen for installing driver software appears, wait for a while until the installation is complete.・When "Install software" screen appears on the terminal, tap [SKIP] or [CANCEL].・The "Use USB to" screen appears on the terminal.❖Information・To change the USB connection mode, drag the status bar downwardsuTap the notification of USB connection mode and then select a USB connection mode.Connecting to PCConnecting to PC with USB cable A to CCharge this deviceOnly charging is performed.Supply powerCharge a connected device.・It is required that the connected device is compatible with the function.Transfer filesThe terminal is displayed on the PC screen as a portable device and you can access the internal storage and a microSD card in the terminal.Use device as MIDIUse the terminal for MIDI input.USB tetheringP. 1 6 4
203External device connectionRemoving USB cable A to C safely・Do not remove the USB cable A to C during while transferring data. Data may be damaged.1Confirm that it is not transferring data, remove the USB cable A to C.Using Wi-Fi function, you can share media files with other client (DLNA : Digital Living Network Alliance) devices.・Connect the terminal to the Wi-Fi network same with a DLNA device connected to in advance (P.159).1From the Home screen, u[Settings]u[Device connection]u[Media server].2Tap   of "Share media".・ appears on the status bar.・Tap [Change server name] to rename the terminal (media server) displayed on a DLNA device.3Connect the DLNA device to the terminal using an application on the DLNA device.・Access request for media server is notified to the terminal.4On the Media server settings screen of the terminal, tap the pending DLNA deviceuSet the access level.・The DLNA device is registered.・If you tapped [Allow this time], read the message that appearsuTap [OK].5Select a media file on your terminal using the DLNA device to play it back.Connecting DLNA deviceSetting Media server
204International roamingInternational roamingWith the international roaming (WORLD WING), you can use the terminal without changing phone number or mail address in the service area of the overseas network operator affiliated with DOCOMO. You do not need to change the settings of call and SMS.For details of International Roaming Service (WORLD WING), refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/english/service/world/roaming/■ Supporting networksYou can use the terminal in the service area for the LTE network, 3G network and GSM/GPRS networks. Services are also available in countries and areas supporting 3G 850MHz/GSM 850MHz.❖Information・For Country codes, International call access numbers, Universal number international prefix, supported countries/areas and network operators, refer to NTT DOCOMO website.* To use data communication during roaming, setting "Data roaming" to ON in Mobile networks is required (P.206).❖Information・Some services are not available depending on the overseas network operator or network.・You can confirm the name of the connected network operator on the Quick settings panel (P.54).Overview of International roaming (WORLD WING)Available overseas serviceMain communication servicesLTE 3G 3G 850 GSM (GPRS)Phone○○○○Message (SMS)○○○○Mail*○○○○Browser*○○○○
205International roamingTo use the terminal overseas, check the following in Japan.■ Subscription・Check if you subscribe WORLD WING. For details, contact "General Inquiries" on the last page.■ Charging・For charging, refer to NTT DOCOMO website.■ Usage charge・Overseas usage charges (call and packet communication) differ from those in Japan. For details, refer to NTT DOCOMO website.・Some applications perform communication automatically. Packet communication charge may be higher. For operations for each application, ask the application provider.Network service settingsIf you subscribe to network services, you can use network services such as Voice Mail Service, Call Forwarding Service, Caller ID Display Request Service, etc., even overseas. However, some network services cannot be used.・To use network services overseas, you need to set "Remote operation settings" to "Activate Remote operation" (P.98). You can set Remote operation settings in the country you stay (P.211).・Even if the setting/canceling operation is available, some network services cannot be used depending on overseas network operators.Before using overseasBefore leaving JapanAdvance preparation
206International roamingWhen you arrive overseas and turn on the terminal, an available network is automatically set.ConnectivityWhen you have set "Search mode" of "Service providers" (P.206) in Mobile networks to "Automatic", optimized network is automatically selected.Setting data roamingTo perform packet communication overseas, setting "Data roaming" to ON in Mobile networks is required.1From the Home screen, u[Settings]u[More]u[Mobile networks].2Tap   of "Data roaming"uRead the notes and tap [OK].Setting a network operatorBy default, the terminal automatically searches available network and connect to it. To switch network manually, set as follows.1From the Home screen, u[Settings]u[More]u[Mobile networks]u[Service providers].・If the note appears, tap [OK].・Perform network search.2[Search mode]u[Manual].・To display available networks, tap [Search networks].3Tap a network to use from "AVAILABLE NETWORKS".❖Information・If you set a network manually, the terminal is not reconnected to another network automatically even if you move out of the network area.・To return to "Automatic", tap [Search mode] in Step 2u[Automatic]uTap [OK] if the Note appears.After arriving overseasSettings for overseas use
207International roamingSetting the preferred network type1From the Settings screen, u[Settings]u[More]u[Mobile networks]u[Preferred network type].2Tap any of [4G (preferred)/3G/GSM]/[4G/3G]/[3G/GSM]/[GSM only].・Select "4G (preferred)/3G/GSM" to switch available network automatically.Using VoLTE during international roamingSet to enable VoLTE when VoLTE is available during international roaming.1From the Home screen, u[Settings]u[More]u[Mobile networks].2Tap   of "Enable VoLTE".Date & time settingsWhen "Automatic date & time", "Automatic time zone" in "Date & time" are ON, the date, time and time differences of the terminal clock are corrected by receiving the information related to time and time differences from the network of overseas network operator you connect to. ・Correction of the time/time differences may not be performed correctly depending on the network of overseas network operator. In that case, set time zone manually.・Timing of correction varies by the overseas network operator.・Setting Date & time (P.191)About inquiries・For loss or theft of the terminal or docomo nano UIM card, immediately contact DOCOMO from the spot to take the necessary steps for suspending the use. For inquiries, refer to the last page. You can also suspend the use from My docomo. Note that you are still liable for the call and communication charge incurred after the loss or theft occurred.・For using from land-line phone, entering "International call access number" or "Universal number international prefix" for the country is needed.
208International roamingWhen you arrive overseas and turn on the terminal, an available network is automatically set.・Check that the battery and signal levels are high enough.・Depending on the network operator, even if the Caller ID notification is active, the caller ID may not be notified or appear properly.In this case, calls cannot be made from the call log.You can make a call from overseas using the international roaming service.・You can easily make international calls from the country you stay to Japan or to other countries by entering prefix "+" and then the country code and phone number.1From the Home screen, u"Dial" tab.2Dial + (touch and hold [0])uEnter Country code, Area code (City code), a phone number in the order.・If the area code (city code) begins with "0", omit "0". However, "0" may be required to dial to some country or area such as Italy.・To call an overseas "WORLD WING" user, enter "81" (Japan) for the country code.3Tap .・When "Auto conversion" (P.211) in International dial assist is turned on, "International dial assist" screen appears when sending. To make a call to Japan, tap [CALL].・To make a video call, uTap [ Video call].4When the call is finished, tap  .❖Information・For details on the Video call, see "Making/Receiving a call" (P.88).Making/Receiving a call in the country you stayMaking a call to outside country you stay (including Japan)
209International roamingYou can make a call by entering the phone number of the other party's land-line phone or mobile phone in the same way you do in Japan.1From the Home screen, u"Dial" tab.2Enter a phone number.・To make a call to land-line phone, enter the area code (city code), other party's phone number in order.3Tap .・When "International dial assist" screen is displayed, tap [CALL ORIGINAL].4When the call is finished, tap  .When the other party uses international roaming service, make a call as an international call to Japan even when you stay in the same country as the other party.You can receive a call using the international roaming service.1On the incoming call screen, drag  (left) to   (right).2When the call is finished, tap  .❖Information・When you received a call during the international roaming, regardless of which country the call is from, it is forwarded internationally from Japan. A caller is charged for a call fee to Japan, and the receiver is charged for a reception fee.Making a call from the other party■ Having someone make a call from Japan to the country you stayTo have the other party make a call from a land-line phone or mobile phone in Japan to the terminal in the country you stay, the other party only needs to dial the phone number as in Japan.Making a call within the country you stayMaking a call to WORLD WING user overseasReceiving a call in the country you stay
210International roaming■ Having someone make a call from other than Japan to the country you stayYou have to receive a call through Japan no matter where you are; therefore, the other party needs to enter the international call access number and "81" (Country code of Japan).International access number - 81 - 90 (or 80, 70) - XXXX - XXXXMake settings for using international roaming services.・For some overseas network operators, settings may not be made.1From the Home screen, uTap .2[Call settings]u[Roaming settings].International roaming settingsRestricting incoming callsSet to restrict incoming calls during international roaming.Incoming calls notificationSet to notify with SMS if you cannot receive calls because of out of service etc. during international roaming.Roaming guidanceSet to notify a caller of international roaming with a guidance indicating it is a call during international roaming.International dial assistP. 2 1 1Network serviceP. 2 1 1
211International roaming1From the Home screen, uTap .2[Call settings]u[Roaming settings].3[International dial assist].Set network service such as voice mail from overseas.・You need to set "Remote operation settings" (P.98) to "Activate Remote operation" in advance.・If you make the settings overseas, you are charged a call fee to Japan from the country you stay.・For some overseas network operators, settings may not be made.1From the Home screen, uTap .2[Call settings]u[Roaming settings].3[Network service]uSelect a target service.4[OK]uOperate according to the onscreen instructions or voice guidance.Setting International dialing assistAuto conversionAdd international prefix or country code automatically.Country codeSelect a country code used for auto conversion.International prefixSelect an international prefix used for auto conversion.Setting Network service (overseas)Remote operation (charged)Set whether to start Remote operation.Caller ID request (charged)Play a guidance asking for notifying caller ID when there is an incoming call without caller ID.Incoming call notific. (charged)P. 2 1 0Roaming guidance (charged)P. 2 1 0Voicemail(charged)Take messages from callers when you are in a place the signal does not reach or turn off the terminal.Separate subscription is required.Call forwarding (charged)Forward incoming calls to another mobile phone etc. that is registered in advance.Separate subscription is required.
212International roamingWhen you return to Japan, the terminal is connected to DOCOMO network automatically. If connection is failed, perform the following operations.・Set "Preferred network type" (P.207) to "4G (preferred)/3G/GSM".・Set "Search mode" to "Automatic" in "Service providers" (P.206).After returning to Japan
213Appendix/IndexAppendix/Index・When you have a vague idea of malfunctioning, you can perform diagnosis by yourself.For details, refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/support/trouble/repair/ (in Japanese only)・Check if the software update is necessary for the terminal. If necessary, perform the software update (P.226, P.229).・When checking the following items not to improve the state, contact the phone number given in "Repairs (Inquiries/Request)" the last page of this manual (in Japanese only) or DOCOMO-specified repair office.■ Power supplyCannot power on the terminal.・Check if the battery is not run out.→P.36Screen is frozen, the power cannot be turned off.・When the screen freezes or the power cannot be turned off, press and hold O and the volume up key at the same time for approximately 8 seconds and release it when the terminal vibrates 3 times consecutively to force stop.* Note that some data and settings may be erased due to force-quit operation.■ ChargingCannot charge (The notification LED does not turn on, or the icon does not indicate charging status.)・Check if the adapter's power plug is correctly inserted to an outlet or accessory socket.・Check if the adapter and the terminal are set correctly.→P.40・When using an AC adapter (optional), check if the Type-C plug of the AC adapter is connected to the terminal correctly.→P.40・When using the USB cable A to C 01 (optional), check if a PC is turned on.・If you execute calls, communications or other function operations for a long time while charging, the terminal may become hot and the notification LED turns off (charging stops) or battery level may become low. In this case, wait until the temperature of the terminal drops and charge again.The notification LED blinks in red and the terminal cannot be operated.・When the battery level is low, charge the battery.→P.36TroubleshootingTroubleshooting
214Appendix/IndexBattery Care charging does not start・Battery Care charging cannot start when learning is not complete because regularity in your charging habit has not been found.→P.37Cannot charge fully・If you remove charging equipment during Battery Care charging, the terminal may not be fully charged.To charge fully, from the Home screen, u[Settings]u[Battery]u[Battery Care]uTap   to turn off Battery Care and then switch to normal charge. →P.37■ Terminal operationBecome hot while operating/charging.・While calling, depending on the radio wave condition or call duration time, the terminal may become hot around the earpiece/speaker. This condition is not abnormal.・While operating or charging, or if you use application, watch TV, record video, etc. for a long time while charging the battery, the terminal, internal battery or adapter may become hot. There is no problem about operation and continue to use it.・When the temperature of the terminal is raised, a message appears on the Notification panel and some applications or services may become unavailable.In this case, wait until the temperature of the terminal drops and use again.The operation time provided by the battery is short.・Is the terminal left for a long time under the state of out of service area?Out of service area, a lot of power is consumed to search available radio waves. If you are out of service area for a long time, set Airplane mode or power off the terminal. →P.42 , P.163・The operating time of the battery varies depending on the operating environment and the degradation level of the internal battery.→P.36・The internal battery is a consumable part. Each time the internal battery is recharged, the battery usage time per one charge gradually decreases.If the operation time becomes too short with fully charged state, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only) or a DOCOMO-specified repair office.・Check if multiple applications are activated. Exit the unused applications. →P.67
215Appendix/Index・When the Wi-Fi function or Bluetooth function is not used, turn off the setting. →P.158 , P.197・When STAMINA mode is set, the operations and a part of functions of the terminal are restricted so that the consumption of the battery power can be reduced. →P.177Operations are not possible when tapping or pressing keys.・Check if the power is turned off.→P.42・Check if you activate the screen lock.→P.181・When you touch the screen at a right angle by gloved finger with "Glove mode" ON, operation may not be performed well. Use a ball of finger to touch the screen for operation.→P.169The screen reacts slowly when you tap or press the keys.・When large amount of data is saved in the terminal or transferring large-size data between the terminal and microSD card, the reactions on the screen may be delayed.The docomo nano UIM card is not recognized.・Check if the docomo nano UIM card is attached in the right direction.→P.32The clock is not on time.・The clock time may become wrong when the power is turned on for a long time. Check if "Automatic date & time" and "Automatic time zone" are ON and turn the power off and on in a place with strong radio wave conditions.→P.191The terminal operation is unstable.・Instability may be caused by applications that you installed after purchasing the terminal. If the symptom is improved when you boot the terminal in safe mode (near default state), uninstalling the installed application may improve the symptom.To boot the terminal in safe mode, press and hold O for at least 1 second with the terminal OFF until XPERIA logo appears, and then press and hold the volume down key for a while.When the power is turned on, press and hold O for at least 1 seconduTouch and hold [Power off]uTap [OK] to restart the terminal in Safe mode.When safe mode is booted, "Safe mode" is displayed at the lower left of the screen.To exit from the safe mode, turn power OFF and then ON.* Back up necessary data before using safe mode.* Some applications or widgets may be erased.
216Appendix/Index* Safe mode is not a normal active state. To use ordinarily, exit from the safe mode.Applications cannot be operated properly (applications cannot be activated, or errors occur frequently).・Are there any applications being disabled? Enable disabled applications, then retry.→P.175・Are the permissions for the application granted?→P.49 , P.174■ Phone callCannot make a call even if you tap  .・Check if you activate Airplane mode.→P.163The ringtone does not sound.・Is "Ring volume" set to silent?→P.173・Check if the following functions are activated.-Silent mode→P.46- Airplane mode→P.163・Is the ring time for Voicemail service or Call forwarding service "0 sec"?→P.97・Check if Pick up after in Answering Machine is set to "0 second".→P.96・Check if you set Call Blocking.→P.98Cannot call (Even when moving,   does not disappear, or although radio waves are enough, making/receiving calls is unavailable.)・Turn the power OFF and ON, or remove and attach docomo nano UIM card.→P.32, P.42・Due to the nature of radio waves, making/receiving calls may be unavailable even when "not out of service area" or "  appears on the display for the radio wave condition". Move to the other place and call again.・Check if you set Call Blocking.→P.98・Due to the crossing of radio waves, at the crowded public places, calls/mails are crossed and the connection status may not be good. Move to other place or call again at other time.An application activates when dialing・If you dial to a phone number subject to モバイルセレクト (Mobile select), モバイルセレクト (Mobile select) application activates. Follow the onscreen instructions.
217Appendix/Index■ DisplayThe display is dim.・Check if "Sleep" is set in short time period.→P.169・Check if the brightness of screen is changed.→P.170・When "Adaptive brightness" is ON, screen brightness is changed according to the ambient brightness.→P.169・Check if you cover the Proximity/Light sensor with a sticker etc.→P.30・When the temperature of the terminal becomes high while using, the display may become darker. It is not abnormal.■ SoundDuring a voice call, the distant party's voice is hard to listen to or too loud.・Check if the listening volume is changed.→P.94■ MailMail is not received automatically.・Check if you set "Check frequency" in Email account settings to "Manual".→P.113■ CameraStill pictures and video taken with the camera are blurred.・Check if clouds, dirt or film attach to the lens of camera.・Use "SUPERIOR AUTO" for the capturing mode.→P.135・Set "SteadyShot™" and then shoot.→P.142Photo or video shot with flash is whitish.・If there is your finger or cover around the camera lens, flash light may reflect and affect photo or video shooting.■ TVUnable to watching Full seg/1Seg・Are you out of terrestrial digital TV broadcasting service area or in a place where airwave is weak?・Check if channels in the current location are saved.→P.131
218Appendix/Index■ Osaifu-KeitaiOsaifu-Keitai function is unavailable.・When Omakase Lock is set, Osaifu-Keitai functions are unavailable regardless of the NFC / Osaifu-Keitai lock settings.・Check if NFC / Osaifu-Keitai lock setting is set.→P.124・Check if you hold NFC / Osaifu-Keitai position over an IC card reader?→P.123■ International roamingCannot use the terminal overseas (when  is displayed)・Do you subscribe WORLD WING?Check if you subscribe WORLD WING.Cannot use the terminal overseas (when  is displayed)・Check if you are out of the international roaming service area or in an area with poor signal strength.Check if the service area and network operator are available or not, refer to NTT DOCOMO website.・Change the network settings or overseas network operator settings.- Set "Preferred network type" to "4G (preferred)/3G/GSM".→P.207- Set "Search mode" to "Automatic" in "Service providers".→P.206・Turning the power off and on may solve the problem.→P.42Cannot perform data communication overseas.・Turn on "Data roaming". →P.206The terminal suddenly became unavailable while using overseas.・Check if usage amount exceeds the limit of maximum charges for use.For use of "International roaming (WORLD WING)", the limit of maximum charges for use is set in advance. If exceeding the limit of maximum charges for use, pay the charges.Cannot receive calls overseas.・Is "Restricting incoming calls" set to "Activate restriction"?→P.210No caller ID is notified/a notified caller ID is different from that of the caller/functions for using contents saved in phonebook or those using Caller ID notification do not operate.・Even if a caller notifies its caller ID, it is not displayed on the terminal unless the network or network operator notifies it. And a different caller ID may be notified depending on the network or network operator you use.
219Appendix/Index■ Data managementData transfer is not performed.・Check if USB hub is used. If you use USB hub, operations may not be performed correctly.Data saved in microSD card is not displayed.・Remove and reinsert the microSD card.→P.34"" or "u" appears when displaying images, or " " or "u" appears for the demo play or the preview function.・""/"u" may appear instead of destroyed image data.■ Bluetooth functionThe terminal cannot be connected to a Bluetooth communication device/A Bluetooth communication device cannot be found by search.・Make Bluetooth communication device (commercial item) registering stand-by state and then register the device on the terminal. If you delete already registered device and register the device again as a new device, delete the registrations on both Bluetooth communication device (commercial item) and the terminal and then perform registration of the devices.→P.198Calls cannot be made from the terminal connecting to external device such as car navigation or handsfree device.・If calls are made several times when the other party does not answer or is out of service, the call to this number may be disabled. In this case, turn terminal off and on.■ External device connectionAn external device connected using USB cable A to C etc. is not recognized.・Reconnect the external device.However, some devices may not be detected.■ Map/GPSCannot set AUTO-GPS service information.・Check if the battery level is low and AUTO-GPS function stops.If AUTO-GPS stops due to "Low-power operation settings", AUTO-GPS service information cannot be set. In this case, set "Low-power operation settings" to "Not suspend" or charge the battery. →P.36, P.186・Check if "AUTO-GPS operation settings" is marked.→P.186
220Appendix/Index●No service・The terminal is out of service area, or the received signal is too weak. Move to a location where radio signal can be reached.・The docomo nano UIM card is not working properly.Removing and inserting docomo nano UIM card may solve the problem.If the problem persists, try inserting the docomo nano UIM card into another terminal. If this works, it is probably the terminal that is causing the problem. In this case, contact "Repairs (Inquiries/Request)" on the last page of this manual (in Japanese only).●Mobile network not availableInstall docomo nano UIM card correctly (P.32), then move to a location where radio signal reaches.●Unknown error. Could not switch to video call.This appears when switching to video call is not available. If the other party's phone is not compatible with video call or the other party uses Call waiting, or during voice guidance play, switching is not available.●Call not sentThis appears when making a voice call or video call is not available. During a video call, making a voice call to another party is not available. Also, if the other party's phone is not compatible with video call, or during a voice call, making a video call is not available.●Normal calls are restricted by access control.Appears when normal voice call service is hard to receive because communication lines are busy.●All calls are restricted by access control.Appears when normal/emergency voice call service is hard to receive because communication lines are busy.●Restricted access changedAppears when the voice service or data service is not received.●SIM card is lockedEnter your PIN code (P.180) correctly.●SIM card is PUK-lockedEnter your PUK (PIN Unlock Key) (P.180) correctly.●PIN lock disable code is locked.PIN Unlock Key is locked. Please contact a docomo Shop.Error messages
221Appendix/Index●Memory is getting lowAvailable memory space in the terminal is low. If you continue to use the terminal, some functions or applications may not work. Activate the setting menu and select unnecessary applications, then tap [UNINSTALL] to uninstall the applications (P.174).●Memory full.There is no memory space in the microSD card. Delete unnecessary data (P.196) to save the memory space.By sharing screens of your terminal with NTT DOCOMO, you can receive technical support to make settings, use applications, or connect peripheral devices such as PC. (in Japanese only).・This service is not available when your docomo nano UIM card is not inserted, during international roaming, or in Airplane mode.・Anshin Enkaku Support is a paid service requiring subscription.・Some operations and settings are not supported.・For details on Anshin Enkaku Support, refer to NTT DOCOMO website.1Call あんしん遠隔サポートセンター (Anshin Enkaku Support center).From DOCOMO mobile phones(No prefix) 15710 (toll free)From land-line phones 0120-783-360Business hours: 9:00 a.m. to 8:00 p.m., open all year roundあんしん遠隔サポート (Anshin Enkaku Support)
222Appendix/Index・To make a call to the Anshin Enkaku Support center from the terminal, from the Home screen, u[遠隔サポート (Enkaku support)]u[このスマートフォンから発信する (Make a call from this smartphone)]uTap .2From the Home screen, u[遠隔サポート (Enkaku support)].3[遠隔サポートの接続画面に進む (Go to Enkaku support connection screen)]u[同意する (Agree)].4Enter the connection number notified by DOCOMOu[開始 (Start)].5Enkaku support starts when you are connected.・Make sure that the warranty is received with the terminal upon purchase. Check to be sure that "販売店名・お買い上げ日 (the name of the retailer, date of purchase)", and other items have been filled out on the warranty before storing it in a safe place. If any necessary information is not provided, immediately contact the retailer and request to complete the warranty. The terminal comes with a year's warranty starting from the date of purchase.* TV antenna cable SO01 is not covered by the cost-free repair warranty.・The specifications and the outer appearance of the terminal including the accessories are subject to change for improvement without prior notice.・Data saved in the Contacts etc. may be changed/lost due to the trouble/repairs or handling of the terminal. DOCOMO recommends making a copy of the Phonebook data etc., in case.* You can save Phonebook data in a microSD card inserted to the terminal.* Data such as phonebook entries can be backed up by using docomo cloud.Warranty and After Sales ServicesWarranty
223Appendix/IndexIf you have problems with the terminalBefore asking repair, see "Troubleshooting" (P.213) in this manual to check the problem. If the problem still persists, contact "Repairs (Inquiries/Request)" on the last page (in Japanese only).If repair is required resultinglyBring the terminal to the DOCOMO-specified repair office. However, it must be taken during business hours of the repair office. Make sure to bring a warranty card with the product when you visit the shop. Note that repair may take some days depending on the problem.* Recycled parts which meets DOCOMO quality standard may be used for repairs.■ Within the warranty period・We repair the terminal free of charge based on the terms documented in the warranty.・When requesting a repair, make sure to bring the warranty card with the terminal. Repair requests that are not accompanied by the warranty, that involve malfunction and damage due to incorrect handling by the owner (damage of external connection jack, display, etc.), or for the terminal once repaired in a repair office other than one specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective.・Malfunction due to use of devices and consumable parts other than those specified by DOCOMO will only be repaired at the owner's expense, even if the warranty period is still effective.■ Note that repair may be refused in the following cases:・When the terminal has corrosion due to wet by liquid, condensation, perspiration, etc. or the internal circuit board is damaged or deformed (we may not be able to repair when the external connection jack, display, etc. is damaged or the frame itself is cracked) based on the result of our examination.After Sales Services
224Appendix/Index・The terminal has been repaired by a repair office other than the DOCOMO specified one.* Even if repair is possible, it will be done at the owner's expense, as this type of corrosion or damage is not covered by the warranty.■ If the warranty period expiresWe will repair the terminal at the owner's expense.■ Parts stock periodThe functional parts necessary to repair the terminal will be basically available for a minimum of 4 years after the manufacture is discontinued.For repair acceptance conditions, refer to NTT DOCOMO website.https://www.nttdocomo.co.jp/support/trouble/repair/shop/compatible/index.html (in Japanese only)However, depending on the defective portion, repair may not be possible because of a shortage of repair parts. For details, contact DOCOMO-specified repair office.Precautions●Never modify the terminal or accessories.・Doing so may result in fire, injuries or malfunctions.・The modified terminal may be repaired only if the owner agrees on that all the modified parts are restored to the original conditions.However, repairs may be refused depending on the modifications.The following cases may be considered as modifications.- Put a seal etc. on the display or key part- Glued decorations on the terminal using adhesion bond, etc.- Change the parts such as exterior to other than DOCOMO standard parts・Malfunction and damage due to modifications will be repaired at the owner's expense, even if the warranty period is still effective.●Do not remove the inscription sticker on the terminal.・Note that if the inscription sticker is removed or is replaced with a different sticker, it may disqualify the terminal from repairs.
225Appendix/Index●Note that the settings and other information may be reset (cleared) as a result of malfunction, repair or other handling. In this case, make the settings again. In that case, packet communication charge may incur depending on the settings.●After the repair, Wi-Fi MAC address or Bluetooth address may be changed regardless of the repaired parts.●Take care not to let an object that is easily affected by magnetism, such as a cash card near the terminal because the card may become unavailable.●The terminal is waterproof. If inside of the terminal gets wet or moist, however, turn the power off, then bring the terminal to a repair office as soon as possible. Note that repair may not be possible depending on the condition of the terminal.Created data and download informationNote that data you created or data you retrieved or downloaded from sources other than your terminal may be changed or lost when you change the model or have repairs done to the terminal. DOCOMO shall have no liability for any change or loss of any kind. DOCOMO shall have no liability for packet communication charge for re-downloading data. Under some circumstances, DOCOMO may replace your terminal with its equivalent instead of repairing it. In that case, such data cannot be transferred to the replaced product except for a part.
226Appendix/IndexSoftware update is a function to connect to the network to check if software update is required, then download the update file and install it as required.When update is needed, you can check   (Software Update) in the status bar or information on the NTT DOCOMO website.Software update includes the following, etc. To use the terminal in safety and more comfortably, be sure to update to the latest version.・Improving and adding functions・Operability enhancement・Improving quality・Security patch update❖Information・Updating can be done with data saved to the terminal; note that data may not be always safe depending on the conditions of your terminal (such as malfunction, damage, or water leak). DOCOMO recommends backing up necessary data in advance. However some data may not be backed up.Notes・When the software is updated, restoring the previous software is not possible.・When performing update, the private information concerning the terminal (model, serial number, etc.) is automatically sent to the server of DOCOMO. DOCOMO does not use the sent information for purposes except software update.・For using packet communication via Xi/FOMA, communication charge is not applied for downloading.・For the update using packet communication, docomo nano UIM card provided at subscription to DOCOMO is required. For some updates, subscription to sp-mode may be required to use packet communication.・Making/Receiving calls, communication functions and other functions are disabled while installing.・All key operations are disabled while installing and the installation cannot be stopped on the way.・When the update is complete, the terminal restarts.・When the update is performed, some settings are initialized. Make the settings again.・If PIN code is set, PIN code entry screen appears while the terminal is restarting after the rewriting process. Enter PIN code.Software UpdateSoftware Update
227Appendix/Index・If the update failed and all operations become disabled, please contact a DOCOMO-specified repair office.・Messages (SMS) sent while updating are stored in the SMS center.・Performing update may take time.・Updating is unavailable in the following cases.-During a call- When 圏外 (out of service area) is displayed- Tethering in use as an access point- When date and time are not set correctly- When the remaining battery is not sufficient- When the remaining memory is not sufficient- When the basic software is altered illegally.・Exit from all applications before installing.・Update the software with the battery fully charged.・Do not turn off the terminal while updating.・Stay in a place with strong radio wave condition when downloading. The update may be canceled if the radio wave condition is not good enough.・If an update is not needed, "No upgrade is needed. Use it as it is." appears.・For update available period, refer to NTT DOCOMO website.・You need to perform the installation by yourself for updating software. Drag the status bar downuTap a notificationuTap [install].・To change the auto-update setting, from the Home screen, u[Settings]u[About phone]u[Software Update]uTap of   /   of "Auto download".・When "Auto download" is OFF, perform operation of "When the icon does not appear in the status bar" (P.227).When the icon does not appear in the status barPerform the update as follows.1From the Home screen, u[Settings]u[About phone]u[Software Update]u[Update now].・Download starts.2After a message for installation start appearsu[INSTALL].・Installation starts.Updating software
228Appendix/Index■ When the confirmation screen for update appearsDepending on update, a confirmation screen for performing update appears after [Update now] is tapped.1Select a updating method.・"Perform now (only via Wi-Fi)" : Immediately download the update file via Wi-Fi connection.・"Perform at scheduled time (via Wi-Fi/Xi)"* : Download the update file via Wi-Fi connection or Xi/FOMA at the time that is reserved automatically.* If downloading via Xi/FOMA is not available, "Perform at scheduled time (only via Wi-Fi)" appears. If you does not set spモード (sp-mode), the update cannot be performed even if [Perform at scheduled time (only via Wi-Fi)] is tapped. Use Wi-Fi connection.2[Download and install]/[Download].・"Download and install" : After downloading is complete, the installation is performed automatically. Installation is performed after approximately 10 seconds even if you do not tap [OK].・"Download" : Even when downloading update file is complete, the installation is not performed automatically. To install, perform installation by yourself.❖Information・When the latest software is already applied to the terminal, "No upgrade is needed. Use it as it is." appears.・If downloading stops halfway, data downloaded before interruption is retained for up to 14 days. To resume downloading, resume from   (Download stopped) on the Notification panel.・When "Perform at scheduled time (via Wi-Fi/Xi)" is selected, time for downloading is automatically set. Tap [BACK]u[Perform at scheduled time (via Wi-Fi/Xi)] to set time for downloading again automatically.After the update is done, check if updates for applications are available. Without updating applications, operations may become unstable or functions may not work properly. Be sure to update to the latest version.・Updating from the notification iconWhen the update is complete, the terminal restarts and the notification icon   (Update completed) appears.Drag the status bar downu[Update completed]uFollow the onscreen instructions to update applications in the update list.・Updating from Play StoreFrom the Home screen, tap [Play Store]uuTap [My apps & games] to update each application.Updating applications
229Appendix/Index❖Information・For OS version support information on each application, contact the application provider.Install a software for "Software update" beforehand.For methods of software installation, refer to the following website.http://www.sonymobile.co.jp/support/ (In Japanese only)■ The terminalConnecting to a PC to updateMain specificationProduct nameSO-02KSizeApprox. 146 mm (H)uapprox. 72 mm (W)uapprox. 8.1 mm (T)(Thickest part: Approx. 8.7 mm)WeightApprox. 161gInternal memoryROM : 32GB*1RAM : 4GBExternal memory compatiblemicroSD card of up to 2GBmicroSDHC card of up to 32GBmicroSDXC card of up to 256GB (as of May, 2017)Continuous stand-by timeFOMA/3GStationary (Auto) : Approx. 650 hoursGSMStationary (Auto) : Approx. 480 hoursLTEStationary (Auto) : Approx. 590 hoursContinuous call timeFOMA/3GApprox. 850 min.GSMApprox. 740 min.VoLTE call (voice)VoLTE : Approx. 1,220 min.VoLTE (HD+) : Approx. 1,070 min.Charging timeAC Adapter 06 : Approx. 160 min.DC Adapter 04 : Approx. 180 min.*2
230Appendix/IndexContinuous Full seg watching timeApprox. 470 min.Continuous 1Seg watching timeApprox. 550 min.Display Type/ColorsTFT (Triluminos® Display for Mobile)16,777,216 colorsSizeApprox. 5.2 inchesResolution1,080 (H)u1,920 (V) pixels (Full HD)Image pickup deviceTypeCamera : Backside-illumination layered CMOSFront camera : Backside-illumination layered CMOSSizeCamera : 1/2.3 inchesFront camera : 1/3.0 inchesCamera effective pixelsCamera : Approx. 19,200,000 pixelsFront camera : Approx. 13,200,000 pixelsCamera recorded pixels (Max.)Camera : Approx. 19,200,000 pixelsFront camera : Approx. 13,200,000 pixelsZoomCamera : (Still picture) Max. approx. 8.0x (121 levels), (Video) Max. approx. 8.0x (121 levels)Front camera : ―Still picture recording sizeCamera : 5056u3792 (19MP 4:3)5504u3096 (17MP 16:9)4000u3000 (12MP 4:3)4608u2592 (12MP 16:9)Front camera : 4160u3120 (13MP 4:3)4192u2358 (10MP 16:9)Video recording sizeVideo camera : 3840u2160 (4K 16:9)1920u1080 (Full HD 16:9)1280u720 (HD 16:9)640u480 (VGA 4:3)Front video camera : 1920u1080 (Full HD 16:9)1280u720 (HD 16:9)640u480 (VGA 4:3)Wireless LAN Compliant with IEEE802.11a/b/g/n*3/ac*3 (Corresponding frequency band to IEEE802.11n : 2.4GHz/5GHz)Bluetooth Version4.2*4Radio powerpower class 1Available communication distance*5Within approx. 10 mSupported profile/codec*6 (version)HFP (1.7) (mSBC : 16kHz), HSP (1.2), OPP (1.2), SPP (1.2), HID (1.0), A2DP (1.2) (LDAC/aptX/SBC), AVRCP (1.6), PBAP (1.2), PAN (PAN-NAP (1.0)/PANU (1.0)), HOGP (1.0), MAP (1.2)
231Appendix/Index*1 It is not the actual storage capacity because the memory is also used for the Android OS and preinstalled applications. For available memory, see "Viewing the storage use condition" (P.176).*2 It is a charging time when the microUSB conversion adapter B to C 01 (optional) is used for charging.*3 It supports MIMO.*4 It is confirmed that the terminal and all Bluetooth devices are compliant with Bluetooth standards designated by Bluetooth SIG, and they are authenticated. However, procedures may differ or data transfer may not be possible depending on the device's characteristics or specifications.*5 May vary by the signal status and/or whether there is an interference between communication devices.*6 Bluetooth standards for Bluetooth device connection procedure according to the product's applications.*7 As for 4-pole headset, complied with CTIA standards.・Continuous stand-by time is an estimate of the stand-by time when radio signal reception is normal. Stationary continuous stand-by time is the estimated average operation time when radio signal reception is normal.In certain circumstances, the stand-by time may drop to as low as half the time shown due to the battery charge, function settings, temperature, or radio signal reception in the area (no reception or weak).・Continuous call time is an estimate of the operation time for calling when radio signal reception is normal.・A use of the Internet reduces the actual call (communication)/stand-by time.Composing messages or activating the camera or applications also reduces call (communication)/stand-by time even if you do not call or use the Internet.・Charging time is an estimate of the time required to charge a completely empty internal battery. Under low temperature, charging may require longer time.■ Internal battery* It is a battery capacity for providing an indication of continuous usage time etc.■ TV antenna cable SO01Headset jackSizeDiameter 3.5 mmPole*75-poleBattery typeLithium Ion BatteryVoltage3.8V DCNominal battery capacity*2900mAhSizeLength : approx. 148 mmWeightApprox. 5 g
232Appendix/Index■ File format (media)The terminal supports the display or playback of the following file formats:* Still images are saved in JPEG format when shot with Camera in the terminal.■ Recording time for 1Seg (Estimation)■ Time length of shooting video (Estimation)* Time of recording with Video resolution of 1920u1080 (Full HD).Type File formatSoundAAC-LC (.mp4, .m4v, .3gp, .3gpp, .ts, .avi, .aac, .m4a), AAC+ (.mp4, .3gp, .3gpp, .ts, .avi, .aac), eAAC+ (.mp4, .3gp, .3gpp, .ts, .avi, .aac), AAC-ELD (.mp4, .3gp, .3gpp), AMR-NB (.3gp, .3gpp, .amr), AMR-WB (.3gp, .3gpp, .awb), FLAC (.flac), MP3 (.mp3), MIDI (.mid, .xmf, .mxmf, .rtttl, .rtx, .ota, .imy), Vorbis (.mkv, .webm, .mka, .ogg), PCM (.avi, .wav, .aiff, .aif, .aifc), Opus (.mkv, .webm, .mka, .ogg), ALAC (.m4a), WMA (.wma), DSD (.dsf, .dff )Still image*JPEG (.jpg, .jpeg), GIF (.gif), PNG (.png), BMP (.bmp), WebP (.webp)VideoH.263 (.mp4, .3gp, .3gpp), H.264 (.mp4, .m4v, .3gp, .3gpp, .ts, .avi, .mkv), H.265 (.mp4, .mkv), MPEG-2 Video (.ts), MPEG-4 Video (.mp4, .m4v, .3gp, .3gpp), VP8 (.mkv, .webm), VP9 (.mkv, .webm), Xvid (.avi)Recordable time to save to a microSD card (1GB)Approx. 320 min.Savable time of recording to the internal storagePer video : Up to approx. 100 min.
233Appendix/Index■ Display languageAzerbaijani language (Latin)/Malaysian/Bosanski jezik/Catalan language/Czech/Danish/German/Estonian/English/Spanish/Basque/Filipino/French/A lingua galega/Croatian/Indonesian/Icelandic/Italian/Javanese/Latvian/Lithuanian/Hungarian/Dutch/Norwegian (language for books)/Polish/Portuguese/Romanian/Albanian/Slovakian/Slovenian/Serbian/Sundanese/Finnish/Swedish/Vietnamese/Turkish/Greek/Belarusian/Bulgarian/Kazakh language/Macedonian language/Russian/Tatar language/Ukrainian language/Georgian/Armenian/Hebrew/Arabic/Persian (Dari language)/Marathi/Hindi/Bengali/Punjabi/Tamil/Telugu/Kannada/Malayalam/Thai/Korean/Japanese/Chinese (Simplified)/Chinese (Traditional)■ Text language (Character entry)Afrikaans/Albanian/Arabic/Aragonese/Armenian/Asturian language/Assamese/Azerbaijani/Basque/Belarusian/Bengali/Bodo language/Bosanski jezik/Breton/Bulgarian/Burmese/Catalan/Chinese (Hong Kong)/Chinese (Simplified)/Chinese (Taiwan)/Croatian/Czech/Danish/Maldivian language/Dogri/Dutch /English/Esperanto/Estonian/Faroese/Persian/Finnish/French/Frisian/A lingua galega/Georgian/German/Greek/Gujarati/Hausa/Hebrew/Hindi/Indian English/Hungarian/Icelandic/Igbo/Indonesian/Irish/Italian/Japanese/Javanese/Kannada/Kashmiri/Kazakh language/Khmer/Konkani/Korean/Kurdish/Kyrgyz language/Lao language/Latvian/Lithuanian/Luxembourgish language/Macedonian language/Maithili language/Malagasy/Malaysian/Malayalam/Maltese/Meithei language/Marathi/Mongolian/Nepali/Norwegian/Langue d'oc/Oriya/Polish/Portuguese/Punjabi/Romanian/Russian/Sanskrit/Santali language/Serbian/Sindhi/Sinhalese/Slovakian/Slovenian/Spanish/Sundanese/Swahili/Swedish/Tagalog/Tajik language/Tamil/Tatar language/Telugu/Thai/Turkish/Turkmen language/Ukrainian language/Urdu/Uzbek/Vietnamese/Welsh/Xhosa/Yoruba/Zulu■ Text language (Voice input)By Google voice typingLanguage
234Appendix/IndexYou can check details of certificate and compliance mark specific to the terminal (including certificate number/compliance number).1From the Home screen, u[Settings].2[About phone]u[Certificates].■ VCCIThe terminal complies with a technical standards based on VCCI RULES FOR VOLUNTARY CONTROL MEASURES and the mark of conformity is depicted electronically on the screen.Software delivered with this device and its media is owned by Sony Mobile Communications Inc., and/or its affiliated companies and its suppliers and licensors.Sony Mobile grants you a non-exclusive limited license to use the Software solely in conjunction with the Device on which it is installed or delivered.Ownership of the Software is not sold, transferred or otherwise conveyed.Do not use any means to discover the source code or any component of the Software, reproduce and distribute the Software, or modify the Software.You are entitled to transfer rights and obligations to the Software to a third party, solely together with the Device with which you received the Software, provided the third party agrees in writing to be bound by the terms of this Licence.This licence exists throughout the useful life of this Device.It can be terminated by transferring your rights to the Device to a third party in writing.Failure to comply with any of these terms and conditions will terminate the licence immediately.Certificate and compliance End User Licence Agreement
235Appendix/IndexSony Mobile and its third party suppliers and licensors retain all rights, title and interest in and to the Software.To the extent that the Software contains material or code of a third party, such third parties shall be beneficiaries of these terms.This license is governed by the laws of Japan.When applicable, the foregoing applies to statutory consumer rights.In the event Software accompanying or provided in conjunction with your device is provided with additional terms and conditions, such provisions shall also govern your possession and usage of the Software.This product and its accessories may be covered and controlled by Japans export control regulations ("Foreign Exchange and Foreign Trade Law" and related laws and regulations) And, they are also under coverage of Export Administration Regulations of the U.S. When exporting and reexporting this product and its accessories, take necessary procedures on your responsibility and expense. For details, contact Ministry of Economy, Trade and Industry of Japan or US Department of Commerce.Export Controls and Regulations
236Appendix/IndexAbout the Copyright and Portrait rightsCopyrighted contents you recorded or obtained from sites or Internet home pages using this product by downloading or other means, such as documents, images, music data, software, are prohibited from reproduction, transformation and transmission over public lines without consent of the copyright holders, unless intended for personal use or any other purpose permitted by law.Note that some performances, shows, and exhibitions may not allow photography, movie shooting, or sound recording even for personal use.You should also refrain from taking a picture of other people and disclosing it by such means as posting it on a site on the Internet without their consent because of possible infringement of their right of portrait.TrademarksThe company names and product names appearing in this manual are trademarks or registered trademarks of their respective holders.・"FOMA", "i-mode", "i-αppli", "sp-mode", "mopera U", "WORLD WING", "WORLD CALL", "ToruCa", "iD", "Xi", "LIVE UX", logo of "ToruCa", logo of "Osaifu-Keitai", logo of "iD", logo of "Area Mail", logo of "i-concier", logo of "Instruction Manual", logo of "dmenu", logo of dmarket, logo of "Anshin Enkaku Support", logo of "Anshin Scan", logo of "Shabette concier", logo of "Photo collection", logo of "Hanashite Hon'yaku", logo of "My Magazine", logo of "docomo phonebook", logo of "docomo Data Copy", and logo of "Data Storage BOX" are trademarks or registered trademarks of NTT DOCOMO, INC.・"Bluetooth" is a registered trademark of Bluetooth SIG, Inc. and any use of such marks by Sony Mobile Communications, Inc. is under license.・iWnn© OMRON SOFTWARE Co., Ltd. 2008-2017 All Rights Reserved.Intellectual Property Right
237Appendix/Index・Wi-Fi, Wi-Fi Protected Setup, Wi-Fi Protected Setup logo, WPA2™, Wi-Fi Direct and  Wi-Fi CERTIFIED Miracast are registered trademarks of Wi-Fi Alliance.・"Catch Phone (Call waiting service)" is a registered trademark of Nippon Telegraph and Telephone Corporation.・Xperia and Xperia Lounge are trademarks or registered trademarks of Sony Mobile Communications Inc.・PlayStation and DUALSHOCK are trademarks or registered trademarks or Sony Interactive Entertainment Inc.・Sony, X-Reality, FeliCa, Reader, Triluminos, STAMINA and TV SideView are trademarks or registered trademarks of Sony Corporation.・SmartAR® is an augmented reality technology developed by Sony Corporation and it is a registered trademark or trademark in Japan and other countries.・POBox and POBox logo are registered trademarks of Sony Computer Science Laboratories, Inc.POBox is a co-developed technology of Sony Computer Science Laboratories, Inc. and Sony Mobile Communications, Inc.・microSD logo, microSDHC logo and microSDXC logo are trademarks of SD-3C, LLC.・USB Type-C™ is a trademark of USB Implementers Forum.・ is a registered trademark of FeliCa Networks, Inc.・FeliCa is a contactless IC card technology developed by Sony Corporation.・ is a trademark or registered trademark of NFC Forum, Inc. in the US and other countries.・"Twitter" is a trademark or registered trademark of Twitter, Inc.・"Google" and "Google" logo, "Android", "Google Play" and "Google Play" logo, "Gmail" and "Gmail" logo, "Google Maps" and "Google Maps" logo, "Google Calendar" and "Google Calendar" logo, "YouTube" and "YouTube" logo, "Google Docs" and "Google Docs" logo, "Google Chrome" and "Google Chrome" logo are trademarks or registered trademarks of Google, Inc.・Facebook and Facebook logo are trademarks or registered trademarks of Facebook, Inc.・"DLNA" and "DLNA" logo are trademarks or registered trademarks of the Digital Living Network Alliance.
238Appendix/Index・"Microsoft", "Windows", "Microsoft Excel", "Microsoft PowerPoint", "PlayReady" and "Microsoft Exchange ActiveSync" are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.・"Microsoft Word" is a product name of Microsoft Corporation in the United States.・This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.・Content owners use Microsoft PlayReady content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device's ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.・This product is licensed under the MPEG-4 visual and AVC patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 visual standard ("MPEG-4 video") or the AVC standard ("AVC video") and/or (ii) decoding MPEG-4 or AVC video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 and/or AVC video. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained MPEG LA, L.L.C. (See http://www.mpegla.com ). MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson.・Other product and company names mentioned herein may be the trademarks of their respective owners.In context, TM and ® mark are omitted.・Any rights not expressly granted herein are reserved. All other trademarks are property of their respective owners.
239Appendix/IndexThis terminal supports SIM unlock. If you release SIM lock, you can use SIM by a carrier other than NTT DOCOMO.・Available services and functions may be limited. DOCOMO is not liable to any failures or malfunctions.・For details of SIM unlock procedure, refer to NTT DOCOMO website.1Insert SIM card provided by other company.2Power on the terminal.3Enter the SIM unlock codeu[UNLOCK].SIM unlock
240Appendix/IndexAAbout phone・・・・・・・・・・・・・・・・・・・・・・・・ 194Access pointInitializing・・・・・・・・・・・・・・・・・・・・・・・・・ 167Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 167Accessibility・・・・・・・・・・・・・・・・・・・・・・・・・ 193Account & sync・・・・・・・・・・・・・・・・・・・・・・・ 187Removing・・・・・・・・・・・・・・・・・・・・・・・・・ 188Accounts & services・・・・・・・・・・・・・・・・・・・ 186Adjusting sound volume・・・・・・・・・・・・・・・ 173Airplane mode・・・・・・・・・・・・・・・・・・・・・・・ 163Alarm・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 153Alarm ringtone・・・・・・・・・・・・・・・・・・・・・・・ 173Alarm volume・・・・・・・・・・・・・・・・・・・・・・・・ 173Album・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 145Amazon Kindle・・・・・・・・・・・・・・・・・・・・・・・・ 65Amazon Shopping・・・・・・・・・・・・・・・・・・・・・ 65Anshin Scan・・・・・・・・・・・・・・・・・・・・・・・・・・ 62Answering Machine・・・・・・・・・・・・・・・・・・・・ 96App permissions・・・・・・・・・・・・・・・・・・・・・・・ 49ApplicationAdding to Home screen (Xperia Home)・・ 68docomo LIVE UX・・・・・・・・・・・・・・・・・・・・・ 83List・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 62Moving・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 84Moving to Home screen (docomo LIVE UX)・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 83Resetting・・・・・・・・・・・・・・・・・・・・・・・・・・ 175Search・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85Uninstalling (application screen)・・・・・・・・ 84Uninstalling (docomo LIVE UX)・・・・・・・・・ 81Uninstalling (Play Store)・・・・・・・・・・・・・・ 121Uninstalling (Xperia Home)・・・・・・・・・・・・ 68Xperia Home・・・・・・・・・・・・・・・・・・・・・・・・ 62Application screenAdding・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 69docomo LIVE UX・・・・・・・・・・・・・・・・・・・・・ 83Folder・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 69Rearranging・・・・・・・・・・・・・・・・・・・・・・・・ 69Recommends・・・・・・・・・・・・・・・・・・・・・・・ 84Switching・・・・・・・・・・・・・・・・・・・・・・・・・・ 83Switching (Xperia Home)・・・・・・・・・・・・・・ 62Xperia Home・・・・・・・・・・・・・・・・・・・・・・・・ 62Application selection screen・・・・・・・・・・・・・ 48AppsManaging・・・・・・・・・・・・・・・・・・・・・・・・・ 173Apps buttondocomo LIVE UX・・・・・・・・・・・・・・・・・・・・・ 80Xperia Home・・・・・・・・・・・・・・・・・・・・・・・・ 55Area Mail・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 115Assist・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 190AUTO-GPS・・・・・・・・・・・・・・・・・・・・・・・・・・・ 186BBacklight・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 42Backup & reset・・・・・・・・・・・・・・・・・・・・・・・ 189Battery・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 177Battery Care・・・・・・・・・・・・・・・・・・・・・・・・・・ 37Battery level・・・・・・・・・・・・・・・・・・・・・・・・・・ 37Battery optimization・・・・・・・・・・・・・・・・・・ 177Bluetooth・・・・・・・・・・・・・・・・・・・・・・・・・・・ 197Device name・・・・・・・・・・・・・・・・・・・・・・・ 197Index
241Appendix/IndexPair setting・・・・・・・・・・・・・・・・・・・・・・・・ 198Receiving・・・・・・・・・・・・・・・・・・・・・・・・・ 199Sending・・・・・・・・・・・・・・・・・・・・・・・・・・・ 199Bookmarks・・・・・・・・・・・・・・・・・・・・・・・・・・ 119Brightness level・・・・・・・・・・・・・・・・・・・・・・ 170CCalculator・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64Calendar・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63Call・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 88Answering with Answering Machine・・・・ 91Calling screen・・・・・・・・・・・・・・・・・・・・・・・ 93Declining a call・・・・・・・・・・・・・・・・・・・・・・ 92Ending・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 93Making a call・・・・・・・・・・・・・・・・・・・・・・・・ 88Mute・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 93Receiving・・・・・・・・・・・・・・・・・・・・・・・・・・ 91Call Blocking・・・・・・・・・・・・・・・・・・・・・・・・・・ 98Call forwarding service・・・・・・・・・・・・・・・・・・ 97Call history・・・・・・・・・・・・・・・・・・・・・・・・・・・ 95Adding to Phonebook・・・・・・・・・・・・・・・・ 95Deleting・・・・・・・・・・・・・・・・・・・・・・・・・・・ 96Call notification・・・・・・・・・・・・・・・・・・・・・・・・ 98Call settings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 97Call Waiting・・・・・・・・・・・・・・・・・・・・・・・・・・・ 97Caller ID display request service・・・・・・・・・・ 98Caller ID notification・・・・・・・・・・・・・・・・・・・・ 97CallingHolding a call・・・・・・・・・・・・・・・・・・・・・・・ 94Camera・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 133Activating・・・・・・・・・・・・・・・・・・・・・・・・・ 134Camera apps・・・・・・・・・・・・・・・・・・・・・・・ 135Capturing mode・・・・・・・・・・・・・・・・・・・・ 135Quick launch・・・・・・・・・・・・・・・・・・・・・・・ 134Recording videos・・・・・・・・・・・・・・・・・・・ 138Resolution・・・・・・・・・・・・・・・・・・・・・・・・・ 135Settings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 139Shooting screen・・・・・・・・・・・・・・・・・・・・ 134Shooting still pictures・・・・・・・・・・・・・・・ 137Character entry・・・・・・・・・・・・・・・・・・・・・・・・ 73Edit・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 77Input method・・・・・・・・・・・・・・・・・・・・・・・ 75Settings・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 79Charging・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 36Desktop holder・・・・・・・・・・・・・・・・・・・・・・ 38Using a PC・・・・・・・・・・・・・・・・・・・・・・・・・・ 41Using AC adapter・・・・・・・・・・・・・・・・・・・・ 40Using DC adapter・・・・・・・・・・・・・・・・・・・・ 40Chrome・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 117Adding tab・・・・・・・・・・・・・・・・・・・・・・・・ 117Bookmarks・・・・・・・・・・・・・・・・・・・・・・・・ 119History・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 119Incognito tab・・・・・・・・・・・・・・・・・・・・・・ 117Link・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 119Searching text・・・・・・・・・・・・・・・・・・・・・・ 118Settings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 118Clock・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 153Connecting DLNA device・・・・・・・・・・・・・・・ 203Media server・・・・・・・・・・・・・・・・・・・・・・・ 203Contact docomo・・・・・・・・・・・・・・・・・・・・・・・ 98Contact Picker 2.3・・・・・・・・・・・・・・・・・・・・・・ 78Contacts・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65Dd ACCOUNT・・・・・・・・・・・・・・・・・・・・・・・・・・ 180d POINT・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65Data Storage Box・・・・・・・・・・・・・・・・・・・・・・ 64Data usage・・・・・・・・・・・・・・・・・・・・・・・・・・ 161
242Appendix/IndexDate & time・・・・・・・・・・・・・・・・・・・・・・・・・・ 191Device・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 168Device connection・・・・・・・・・・・・・・・・・・・・ 163Dial・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63Disaster kit・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63Display・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 169dmarket・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 120dmenu・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 120docomo Data Copy・・・・・・・・・・・・・・・・・・・・ 154docomo mail・・・・・・・・・・・・・・・・・・・・・・・・・ 107docomo nano UIM card・・・・・・・・・・・・・・・・・ 31Precautions・・・・・・・・・・・・・・・・・・・・・・・・・ 20docomo service/cloud・・・・・・・・・・・・・・・・・ 186docomo voice input・・・・・・・・・・・・・・・・・・・・ 74Docs・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64Drive・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64EEarly Warning "Area Mail"・・・・・・・・・・・・・・・ 115Earpiece volume・・・・・・・・・・・・・・・・・・・・・・・ 94e-books Reader by Sony・・・・・・・・・・・・・・・・・ 64Email・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 110Deleting・・・・・・・・・・・・・・・・・・・・・・・・・・ 112Forwarding・・・・・・・・・・・・・・・・・・・・・・・・ 112Initial settings・・・・・・・・・・・・・・・・・・・・・・ 110Receiving・・・・・・・・・・・・・・・・・・・・・・・・・ 111Replying・・・・・・・・・・・・・・・・・・・・・・・・・・ 112Saving attachment file・・・・・・・・・・・・・・・ 112Sending・・・・・・・・・・・・・・・・・・・・・・・・・・・ 111Email accountChanging・・・・・・・・・・・・・・・・・・・・・・・・・ 113Settings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 110Emergency call・・・・・・・・・・・・・・・・・・・・・・・・ 89Emergency mode・・・・・・・・・・・・・・・・・・・・・・ 48Enable VoLTE・・・・・・・・・・・・・・・・・・・・・・・・・ 207English guidance・・・・・・・・・・・・・・・・・・・・・・ 98Enkaku support・・・・・・・・・・・・・・・・・・・・・・ 221FFacebook・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66File manager・・・・・・・・・・・・・・・・・・・・・・・・・ 195Fingerprint authentication・・・・・・・・・・・・・・ 182Authentication・・・・・・・・・・・・・・・・・・・・・ 184Registration・・・・・・・・・・・・・・・・・・・・・・・ 184Flick input・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 76Full seg・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 127Function that allows users and guests to use theterminal・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 185GGmail・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 114Google・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 188Google account・・・・・・・・・・・・・・・・・・・・・・ 187Google Maps・・・・・・・・・・・・・・・・・・・・・・・・・ 150Current location・・・・・・・・・・・・・・・・・・・・ 151Displaying information・・・・・・・・・・・・・・ 151Getting direction・・・・・・・・・・・・・・・・・・・ 151Search・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 151Street View・・・・・・・・・・・・・・・・・・・・・・・・ 151Google Search・・・・・・・・・・・・・・・・・・・・・・・・ 72Google Voice Search・・・・・・・・・・・・・・・・・・・・ 72Google voice typing・・・・・・・・・・・・・・・・・・・・ 74GPSActivate・・・・・・・・・・・・・・・・・・・・・・・・・・・ 150GPS function・・・・・・・・・・・・・・・・・・・・・・・・・ 149HHanashite Hon'yaku・・・・・・・・・・・・・・・・・・・・ 65
243Appendix/IndexHandwriting・・・・・・・・・・・・・・・・・・・・・・・・・・ 75Home applicationdocomo・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 80Switching・・・・・・・・・・・・・・・・・・・・・・・・・・ 71Xperia・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 55Home screen・・・・・・・・・・・・・・・・・・・・・・・・・・ 55Adding (docomo LIVE UX)・・・・・・・・・・・・・ 82Adding (Xperia Home)・・・・・・・・・・・・・・・・ 56Backup・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85Deleting (docomo LIVE UX)・・・・・・・・・・・・ 82Deleting (Xperia Home)・・・・・・・・・・・・・・・ 56docomo LIVE UX・・・・・・・・・・・・・・・・・・・・・ 80Folder (docomo LIVE UX)・・・・・・・・・・・・・・ 80Folder (Xperia Home)・・・・・・・・・・・・・・・・・ 57Kisekae・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 81Restore・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 85Shortcut・・・・・・・・・・・・・・・・・・・・・・・・・・・ 57Simple Home・・・・・・・・・・・・・・・・・・・・・・・ 59Theme・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58Wallpaper (docomo LIVE UX)・・・・・・・・・・・ 82Wallpaper (Xperia Home)・・・・・・・・・・・・・・ 57Widget (docomo LIVE UX)・・・・・・・・・・・・・ 80Widget (Xperia Home)・・・・・・・・・・・・・・・・ 56Xperia Home・・・・・・・・・・・・・・・・・・・・・・・・ 55Home Settings・・・・・・・・・・・・・・・・・・・・・・・・ 58Ii-concier・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66iD application・・・・・・・・・・・・・・・・・・・・・・・・ 125Initial settings・・・・・・・・・・・・・・・・・・・・・・・・・ 43Instagram・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66International callMaking a call from Japan・・・・・・・・・・・・・・ 90Making a call in the country you stay・・・ 208International roaming service・・・・・・・・・・・ 204KKey icons・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Keypad・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 75Kisekae・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 81LLandscape view・・・・・・・・・・・・・・・・・・・・・・・ 46Languages & input・・・・・・・・・・・・・・・・・・・・ 191LAWSON・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66Lifelog・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 66Location・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 186Location services・・・・・・・・・・・・・・・・・・・・・ 149Activate・・・・・・・・・・・・・・・・・・・・・・・・・・・ 150Lock screen & security・・・・・・・・・・・・・・・・・ 178MManereko・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65McDonald's・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67Media Player・・・・・・・・・・・・・・・・・・・・・・・・・ 147Playing・・・・・・・・・・・・・・・・・・・・・・・・・・・ 147Media volume・・・・・・・・・・・・・・・・・・・・・・・・ 173Memo・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65Memory・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 176Message (SMS)・・・・・・・・・・・・・・・・・・・・・・・ 107Deleting message・・・・・・・・・・・・・・・・・・・ 109Deleting messages (SMS) by sender/recipient・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 109Receiving・・・・・・・・・・・・・・・・・・・・・・・・・ 108Registering contact・・・・・・・・・・・・・・・・・ 108Sending・・・・・・・・・・・・・・・・・・・・・・・・・・・ 107Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 109Messenger・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67
244Appendix/IndexmicroSD card・・・・・・・・・・・・・・・・・・・・・・・・・ 33Formatting・・・・・・・・・・・・・・・・・・・・・・・・ 176Unmounting・・・・・・・・・・・・・・・・・・・・・・・ 176Missed call・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 96Moji-Henshu・・・・・・・・・・・・・・・・・・・・・・・・・ 191Movie Creator・・・・・・・・・・・・・・・・・・・・・・・・・ 67Multi-tap input・・・・・・・・・・・・・・・・・・・・・・・・ 77Music・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65My Magazine・・・・・・・・・・・・・・・・・・・・・・・・・ 86My profileDisplay・・・・・・・・・・・・・・・・・・・・・・・・・・・ 102Editing・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 106My Words・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 78NNetwork service・・・・・・・・・・・・・・・・・・・・・・・ 97Network settings reset・・・・・・・・・・・・・・・・・ 168News・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 64NFC・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 199NFC / Osaifu-Keitai lock・・・・・・・・・・・・・・ 124One-touch function・・・・・・・・・・・・・・・・・ 200Notification icon・・・・・・・・・・・・・・・・・・・・・・・ 51Notification LED・・・・・・・・・・・・・・・・・・・・・・・ 50Notification panel・・・・・・・・・・・・・・・・・・・・・・ 53Notification sound・・・・・・・・・・・・・・・・・・・・ 173Notifications・・・・・・・・・・・・・・・・・・・・・・・・・ 170Nuisance call blocking service・・・・・・・・・・・・ 97OOsaifu-Keitai・・・・・・・・・・・・・・・・・・・・・・・・・ 122Kazashite-Link compatible service・・・・・ 124NFC / Osaifu-Keitai lock・・・・・・・・・・・・・・ 124Osaifu-Keitai compatible service・・・・・・・ 123Tap & pay・・・・・・・・・・・・・・・・・・・・・・・・・・ 125Own number・・・・・・・・・・・・・・・・・・・・・・・・・・・6My profile・・・・・・・・・・・・・・・・・・・・・・・・・ 102PPhoneAudio output・・・・・・・・・・・・・・・・・・・・・・・ 93Ringtone volume・・・・・・・・・・・・・・・・・・・・ 92Speaker・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 93When an application is running・・・・・・・・・ 92Phonebook・・・・・・・・・・・・・・・・・・・・・・・・・・ 102Adding a new entry・・・・・・・・・・・・・・・・・ 103cloud (Contacts list)・・・・・・・・・・・・・・・・・ 102cloud (option menu)・・・・・・・・・・・・・・・・ 104Creating group・・・・・・・・・・・・・・・・・・・・・ 105Delete contact・・・・・・・・・・・・・・・・・・・・・ 104Editing・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 103Exporting・・・・・・・・・・・・・・・・・・・・・・・・・ 106Favorites・・・・・・・・・・・・・・・・・・・・・・・・・・ 104Group setting・・・・・・・・・・・・・・・・・・・・・・ 105Importing・・・・・・・・・・・・・・・・・・・・・・・・・ 106Join・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 105Making a call・・・・・・・・・・・・・・・・・・・・・・・ 103Making a video call・・・・・・・・・・・・・・・・・・ 103My profile (display)・・・・・・・・・・・・・・・・・・ 102My profile (editing)・・・・・・・・・・・・・・・・・・ 106Ringtone・・・・・・・・・・・・・・・・・・・・・・・・・・ 105Send My profile・・・・・・・・・・・・・・・・・・・・・ 105Share・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 105Sharing・・・・・・・・・・・・・・・・・・・・・・・・・・・ 106Phonebook list screen・・・・・・・・・・・・・・・・・ 102Photo collection・・・・・・・・・・・・・・・・・・・・・・・ 65Photos・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65PIN code・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 180PIN Unlock Key (PUK code)・・・・・・・・・・・・・ 180
245Appendix/IndexPlay Movies & TV・・・・・・・・・・・・・・・・・・・・・・・ 67Play Music・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67Play Store・・・・・・・・・・・・・・・・・・・・・・・・・・・ 121Installing・・・・・・・・・・・・・・・・・・・・・・・・・・ 121Uninstalling・・・・・・・・・・・・・・・・・・・・・・・・ 121Playing video・・・・・・・・・・・・・・・・・・・・・・・・ 146PlayStation・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67Portrait view・・・・・・・・・・・・・・・・・・・・・・・・・・ 46Preferred network type・・・・・・・・・・・・・・・・ 207Proximity/light sensor・・・・・・・・・・・・・・・・・・ 30Public mode (power OFF) setting・・・・・・・・・ 98QQuick settings panel・・・・・・・・・・・・・・・・・・・・ 54QWERTY・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 75RRecent calls screen・・・・・・・・・・・・・・・・・・・・・ 95Recommended apps・・・・・・・・・・・・・・・・・・・ 63Recording videos・・・・・・・・・・・・・・・・・・・・・ 138Reject call with message・・・・・・・・・・・・・・・・ 92Remote operation settings・・・・・・・・・・・・・・ 98Reset・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 189Ring volume・・・・・・・・・・・・・・・・・・・・・・・・・ 173Ringtone・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 173Roaming settings・・・・・・・・・・・・・・・・・・・・・ 210SScheduleCreating・・・・・・・・・・・・・・・・・・・・・・・・・・ 152Display・・・・・・・・・・・・・・・・・・・・・・・・・・・ 152Screen lock・・・・・・・・・・・・・・・・・・・・・・・・・・ 182Canceling・・・・・・・・・・・・・・・・・・・・・・・・・・ 43Setting・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 181Searching・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 72Security codeNetwork security code・・・・・・・・・・・・・・・ 179PIN code・・・・・・・・・・・・・・・・・・・・・・・・・・ 180PIN Unlock Key (PUK code)・・・・・・・・・・・ 180Setting menu・・・・・・・・・・・・・・・・・・・・・・・・ 158Shabette concier・・・・・・・・・・・・・・・・・・・・・・・ 63Sheets・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63Shooting still pictures・・・・・・・・・・・・・・・・・ 137Silent mode・・・・・・・・・・・・・・・・・・・・・・・・・・・ 46SIM card lock・・・・・・・・・・・・・・・・・・・・・・・・・ 181SIM unlock・・・・・・・・・・・・・・・・・・・・・・・・・・ 239Simple Home・・・・・・・・・・・・・・・・・・・・・・・・・ 59Sketch・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63Sleep mode・・・・・・・・・・・・・・・・・・・・・・・・・・・ 42Slides・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 63SMS・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 107Software keyboard・・・・・・・・・・・・・・・・・・・・・ 74Switching・・・・・・・・・・・・・・・・・・・・・・・・・・ 74Software Update・・・・・・・・・・・・・・・・・・・・・・ 226Sound・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 171Specification・・・・・・・・・・・・・・・・・・・・・・・・・ 229Split screen・・・・・・・・・・・・・・・・・・・・・・・・・・・ 70STAMINA mode・・・・・・・・・・・・・・・・・・・・・・・ 177Status bar・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 50Status icon・・・・・・・・・・・・・・・・・・・・・・・・・・・ 50Stopwatch・・・・・・・・・・・・・・・・・・・・・・・・・・・ 153StorageExternal storage・・・・・・・・・・・・・・・・・・・・・ 33Internal storage・・・・・・・・・・・・・・・・・・・・ 195Storage & memory・・・・・・・・・・・・・・・・・・・・ 175Memory・・・・・・・・・・・・・・・・・・・・・・・・・・・ 176Storage・・・・・・・・・・・・・・・・・・・・・・・・・・・ 176SugudenSuguden setting・・・・・・・・・・・・・・・・・・・・・ 99
246Appendix/IndexSystem・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 190TTake screenshot・・・・・・・・・・・・・・・・・・・・・・・ 47Task manager・・・・・・・・・・・・・・・・・・・・・・・・・ 70Tethering・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 164Bluetooth tethering・・・・・・・・・・・・・・・・・ 165Portable hotspot・・・・・・・・・・・・・・・・・・・・ 164USB tethering・・・・・・・・・・・・・・・・・・・・・・ 164Text editing・・・・・・・・・・・・・・・・・・・・・・・・・・・ 77Theme・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 58Themes & wallpaper・・・・・・・・・・・・・・・・・・・ 168Timer・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 154ToruCa・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 126Touch screen・・・・・・・・・・・・・・・・・・・・・・・・・・ 44Drag・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Flick・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Pinch・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Scroll・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Swipe・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 45Tap・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 44Touch and hold・・・・・・・・・・・・・・・・・・・・・・ 44Troubleshooting・・・・・・・・・・・・・・・・・・・・・・ 213Turning power on/off・・・・・・・・・・・・・・・・・・・ 42TV・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 127Program guide・・・・・・・・・・・・・・・・・・・・・ 130Recording・・・・・・・・・・・・・・・・・・・・・・・・・ 132Reserve Recording/Viewing・・・・・・・・・・・ 130Settings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 130TV antenna cable・・・・・・・・・・・・・・・・・・・ 128TV link・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 130Watching TV・・・・・・・・・・・・・・・・・・・・・・・ 129Twitter・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67UUSB connection・・・・・・・・・・・・・・・・・・・・・・ 202USB Storage・・・・・・・・・・・・・・・・・・・・・・・・・ 176Users・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 185VVibrateSettings・・・・・・・・・・・・・・・・・・・・・・・・・・・ 172VibrationSilent mode・・・・・・・・・・・・・・・・・・・・・・・・・ 46SMS・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 109Video call・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 88Answer without video・・・・・・・・・・・・・・・・ 91Declining a call・・・・・・・・・・・・・・・・・・・・・・ 92Making a call・・・・・・・・・・・・・・・・・・・・・・・・ 88Receiving a call・・・・・・・・・・・・・・・・・・・・・・ 91When an application is running・・・・・・・・・ 92Videos・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 65Viewing photos・・・・・・・・・・・・・・・・・・・・・・ 145Voice search・・・・・・・・・・・・・・・・・・・・・・・・・・ 72Voicemail service・・・・・・・・・・・・・・・・・・・・・・ 97VPN・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 166WWallpaperdocomo LIVE UX・・・・・・・・・・・・・・・・・・・・・ 82Xperia Home・・・・・・・・・・・・・・・・・・・・・・・・ 57Waterproofness/Dustproofness・・・・・・・・・・・ 24What's New・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67When device is rotated・・・・・・・・・・・・・・・・・・ 46White balance・・・・・・・・・・・・・・・・・・・・・・・・ 170Wi-Fi・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 158Wi-Fi Direct・・・・・・・・・・・・・・・・・・・・・・・・・・ 161Wireless & networks・・・・・・・・・・・・・・・・・・・ 158
247Appendix/IndexWORLD CALL・・・・・・・・・・・・・・・・・・・・・・・・・ 90World clock・・・・・・・・・・・・・・・・・・・・・・・・・・ 153WORLD WING・・・・・・・・・・・・・・・・・・・・・・・・ 204XXperia Japanese keyboard・・・・・・・・・・・・・・ 191Online help・・・・・・・・・・・・・・・・・・・・・・・・・ 73Xperia Lounge Japan・・・・・・・・・・・・・・・・・・・ 67YYouTube・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 67Numerics1Seg・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 127
Don't forget your mobile phone ... or your manners!Remember to be courteous to others when you use your terminal.Turn the power off when you are:■In places where use is prohibitedFollow the instructions of each airline or medical facility for the use of mobile phones on their premises. Power off the terminal in a place where the use is prohibited.Always set to public mode in case below■DrivingUse of the terminal holding with your hand while driving will result in a penalty.However, absolutely necessary cases such as rescue of a sick person or maintaining public's safety are exempted.■In places such as theaters, cinemas, and art galleriesUsing the terminal in a public place, where you need to be quiet, annoys people around you.Keep your voice and ring tone down■Keep your voice down in quiet places like restaurants and hotel lobbies.■If you are in an outdoor public place, make sure you do not disturb others.Respect privacy■Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped terminals.Do not use smartphone while walking■Use of smartphone while walking on station platform or road makes your eyesight extremely narrow. It may cause accident.■Stop and stay in a safe place and then use smartphone.Have good manners【Silent mode】 (P.46)Mutes the terminal ringtone or operation sounds.* Shutter sound cannot be muted.【Public mode (power OFF)】 (P.98)Informs the caller that you are required to turn off the terminal and ends the call automatically.【Vibrate】 (P.172)Vibrates when there is an incoming call.【Answering Machine】 (P.96)When you cannot answer a call, the terminal records a message from the caller.You can also use optional services such as the Voice Mail Service (P.97) and Call Forwarding Service (P.97).Make various applications, check your subscription, and more onlineThe terminal: dメニュー (dmenu) u[My docomo(お客様サポート) (My docomo (Customer support))]u[ドコモオンライン手続き (docomo online procedures)]PC: My docomo (https://www.nttdocomo.co.jp/mydocomo/ ) u Select the item in "ドコモオンライン手続き (docomo online procedures)" (in Japanese only)* There are cases where the site may not be available due to system maintenance, etc.* When using "ドコモオンライン手続き (docomo online procedures)", "Network security code" and "ID/password of d ACCOUNT" are required.We collect old phones, etc. regardless of brands and manufacturers. Bring them to your nearest docomo Shop.* Items to be collected: mobile phones, PHS, battery packs, chargers, desktop holders (regardless of brands and manufacturers)
Sales: NTT DOCOMO, INC.Manufacturer: Sony Mobile Communications, Inc.17.4 (1st Edition) 1308-7707.1General Inquiries <docomo Information Center>0120-005-250  (toll free)*Service available in: English, Portuguese, Chinese, Spanish.*Unavailable from part of IP phones.(Business hours: 9:00 a.m. to 8:00 p.m.)■From DOCOMO mobile phones (In Japanese only)(No prefix) 151 (toll free)*Unavailable from land-line phones, etc.■From land-line phones (In Japanese only)0120-800-000 (toll free)*Unavailable from part of IP phones.(Business hours: 9:00 a.m. to 8:00 p.m. (open all year round))●Please confirm the phone number before you dial.●For Applications or Repairs and After-Sales Service, please contact the above-mentioned information center or the docomo   Shop etc. near you on the NTT DOCOMO website.  NTT DOCOMO website  https://www.nttdocomo.co.jp/english/Inquiries while overseas (For loss, theft, phone malfunctions, etc.)Display "+"-81-3-6832-6600 (toll free)Repairs (Inquiries/Request)■From DOCOMO mobile phones (In Japanese only)(No prefix) 113 (toll free)*Unavailable from land-line phones, etc.■From land-line phones (In Japanese only)0120-800-000 (toll free)*Unavailable from part of IP phones.(Business hours: 24 hours (open all year round))From land-line phonesInternational call access number of your country of stay-81-3-6832-6600 (charges apply)*Voice communication charges to Japan apply.*For international call access number, refer to DOCOMO website.●Please confirm the phone number before you dial.●If you lose your terminal or have it stolen, immediately take the steps necessary for suspending the use of the terminal.●If the terminal you purchased is damaged, bring your terminal to a repair counter specified by DOCOMO after returning to Japan.From DOCOMO mobile phones (In Japanese only)*You can also call using the international call access number instead of using "+".(Business hours: 24 hours (open all year round)) (Business hours: 24 hours (open all year round))(Touch and hold “0” to enter "+".)Don’t forget your mobile phone...or your manners!٧When using your mobile phone in a public place, don’t forget to show common courtesy and consideration for others around you. Li-ion 00

Navigation menu