Sony 1130602 Licensed Transmitter User Manual T310UG

Download:
Mirror Download [FCC.gov]
Document ID	337340
Application ID	co1SvEkuQNUUJ7zjU/oEmg==
Document Description	Exhibit 8 User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	128.99kB (1612327 bits)
Date Submitted	2003-07-03 00:00:00
Date Available	2003-07-03 00:00:00
Creation Date	2003-01-02 11:10:48
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2003-01-02 11:24:09
Document Title	T310UG.book
Document Creator	FrameMaker 5.5.6p145
Document Author:	sonya_s

Contents
Getting started 5
More features 66
Make and receive the first call.
Data, events, alarm clock, stopwatch, timer, games.
Getting to know your phone 8
Security 70
Key functions, quick keys, entering letters and characters.
SIM card lock, phone lock.
Personalizing your phone 17
Troubleshooting 72
Choose ring signal, theme and other settings.
Why doesn’t the phone work the way I want?
Calling 27
Additional information 75
Use the phone book, call options.
Sony Ericsson Consumer web site,
safe and efficient use, warranty, declaration of conformity.
Setting up WAP and e-mail 43
Set up the browser and e-mail.
Messaging 51
Chat, e-mail, text and multimedia messages.
Icons 85
What do the icons mean?
Index 89
Using WAP 62
Browser, bookmarks.
This is the Internet version of the user's guide. © Print only for private use.
Sony Ericsson T310
GSM 900/1800/1900
First edition (December 2002)
This manual is published by Sony Ericsson Mobile
Communications AB, without any warranty.
Improvements and changes to this manual
necessitated by typographical errors, inaccuracies
of current information, or improvements to
programs and/or equipment, may be made by Sony
Ericsson Mobile Communications AB at any time
and without notice. Such changes will, however, be
incorporated into new editions of this manual.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2002
Publication number: AE/LZT 108 6221 R1A
Please note:
Some of the services in this manual are not
supported by all networks. This also applies to the
GSM International Emergency Number 112.
Please contact your network operator or service
provider if you are in doubt whether you can use a
particular service or not.
Please read the Guidelines for safe and efficient
use and the Limited warranty chapters before you
use your mobile phone.
T9™ Text Input is a trademark or a registered
trademark of Tegic Communications.
T9™ Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928, and 6,011,554; Canadian
Pat. No. 1,331,057, United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No.
HK0940329; Republic of Singapore Pat. No.
51383; Euro.Pat. No. 0 842 463(96927260.8) DE/
DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional
patents are pending worldwide.
This is the Internet version of the user's guide. © Print only for private use.
Getting started
About this user’s guide
For ease of reference, the “Getting to know your
phone” chapter gives a quick overview of the main
functions of the phone, shortcuts and general
information.
More information and downloads are available at
www.SonyEricsson.com/ or wap.SonyEricsson.com/.
Available services
Some services and functions described in this user’s
guide are network- or subscription-dependent. Because
of this, all menus may not be available in your phone.
This symbol indicates that a service or
function is network or subscriptiondependent.
Please consult your network operator for
more information about your subscription.
keeps track of your phone number, the services
included in your subscription, and your phone book
information, among other things.
Tip: Verify that your information is saved to the SIM
card before you remove it from another phone. For
example, phone book entries may be saved in the
phone memory.
Assembly
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery. See “SIM card and
battery information” on page 6.
Note: Always turn off the phone and detach the
charger before you insert or remove a SIM card.
The SIM card
When you register as a subscriber with a network
operator, you get a SIM (Subscriber Identity Module)
card. The SIM card contains a computer chip that
Getting started
This is the Internet version of the user's guide. © Print only for private use.
SIM card and battery information
You must insert the SIM card and charge the battery
before you can use the phone.
1.
2.
3.
4.
5.
6.
7.
It may take up to 30 minutes before an icon
appears when charging.
Remove the back cover by sliding it open and lifting it
away from the phone.
Insert the SIM card. Make sure the SIM card is placed
under the silvery holders.
Place the battery on the back of the phone with the
connectors facing each other.
Place the back cover into the slots on the phone and
slide it into place.
Connect the charger to the phone at the flash symbol
with the symbol on the charger plug facing upwards.
It may take up to 30 minutes before the battery
charging icon appears in the display.
Wait approximately 4 hours or until the icon indicates
that the battery is fully charged. If you do not see the
battery icon after this time, press any key or the
joystick to activate the display.
Remove the charger by tilting the plug upwards.
Note: A red light shows the battery charging status:
steady when charging with the phone off and flashing
when charging is required.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
Turning on the phone
Welcome
On/off
PIN:
My Network
12:18
To turn on the phone
• Press and hold NO until you hear a tone.
• Enter your PIN (Personal Identity Number), if you
have one for your SIM card.
Your PIN is provided by your network operator.
Note: Not all operators require a PIN to activate
services.
If you make a mistake while entering your PIN, delete
the wrong number by pressing
If your PIN starts with the same digits as an
emergency number, for example 112, the digits are not
hidden with an * when you enter them. This is so that
you can see and call an emergency number without
entering a PIN. See “Emergency calls” on page 28 for
more information.
Note: If you enter the wrong PIN three times in a row,
the SIM card is blocked and the message PIN blocked
appears. To unblock it, you need to enter your PUK
(Personal Unblocking Key). Your PUK is provided by
your network operator.
Making and receiving calls
To make and receive calls
• Enter the area code and phone number, and press YES
to make the call.
• Press NO to end the call.
• When the phone rings, press YES to answer the call.
Getting started
This is the Internet version of the user's guide. © Print only for private use.
Getting to know your phone
Key functions
Volume Increase/decrease the earpiece
key
volume during a call. Scroll
through menus, lists and text.
Enter the Status menu in
standby. Slide twice to reject
an incoming call. Slide once to
turn off the ring signal when
receiving a call.
Light
Press the joystick up, down, left
or right to move through the
menus, lists and texts. Press the
joystick as an alternative to
Press and hold to turn the phone
on or off (in standby) or to go
back to standby mode from
menus. Press to end, reject a call,
go back one level in the menus or
leave an option unchanged.
Make and answer calls. Select
a menu, submenu or an option.
Press for options, help.
Press and hold for WAP.
1–9, 0
Enter digits, 0–9, and letters.
Press and hold
to enter
the international prefix +.
Move through menus using
shortcuts.
Enter *. Shift between lower/
upper case.
Battery charging status.
Infrared Exchange data via the IR port.
(clear)
Delete numbers, letters or an item
from a list. Press and hold to turn
off the microphone (during calls)
or turn off sound or lock the
keypad (standby menu).
Enter # or a space.
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Quick keys
Useful key combinations (using shortcuts) are
described below.
To...
When in standby:
make an emergency call
enter Call contact
enter the international
emergency number and
press YES
press the joystick or
or
or
press
enter Call list
press YES
call your voicemail
press and hold
enter the + sign
press and hold
turn off the ring signal
when receiving a call
press
, or slide the
volume key up or down
once
or
press and hold
press
, YES
enter the menus
set the phone to silent or
lock the keypad, options
reach a contact beginning press and hold any of the
with a specific letter
keys
To...
When in standby:
reach a phone number at a press the position number
specific position.
and
speed dial
press any of the number
keys
and YES
find a contact in the
Call contact list
press and hold
use the first setting in
My shortcuts
press and hold
enter the Status menu to slide the volume key up or
see today’s date, the
down
profile in use and the
model name of the phone
change the language to
Automatic
press
8888
change the language to
English
press
0000
reject a call
quickly slide the volume
key up or down twice
when receiving a call or
press NO
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
To...
During a call:
put a call on hold
press YES
retrieve a call
press YES again
turn off the microphone
press and hold
To...
When in the menus:
move through menus
or lists
use the joystick or slide
(and hold) the volume key
up or down
enter a quick options menu press
or help, if available.
delete an item
go back to standby
10
When entering letters
using multitap text input:
enter a question mark
slide the volume key up
and press
enter the @-sign
slide the volume key down
and press
enter a space
press
delete letters and numbers press
shift between multitap or
T9 Text input methods
press and hold
in lists
press and hold NO
when
To...
When entering letters
using multitap text input:
shift between capital and
lower-case letters
press
enter numbers
To...
press and hold
shift between input
languages and other
character or numeric input
methods
To...
When entering letters
using T9™ Text Input:
view alternative words
press
accept a word and add a
space
press
enter a full stop
press
, then the letter
press and hold any of the
number keys
press and hold
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
or
To...
When entering letters
using T9™ Text Input:
view alternative
punctuation marks
or
press
, then
repeatedly
press
, then the letter
shift between capital and
lower-case letters
enter numbers
press and hold any of the
number keys
delete letters and numbers press
shift between multitap or
T9 Text input methods
press and hold
press and hold
shift between input
languages and other
character or numeric input
methods
To...
When entering numbers:
enter a p (pause)
press and hold
when
entering a pause in a
number or melody.
Using shortcuts
A quicker way to move through the menus is to use
shortcuts. Enter the menus by pressing
or
and
then simply press the joystick to enter the menu. You
can also enter the number of the menu to which you
want to go. To get back to standby, press and hold NO.
You can quickly and easily reach the settings you use
most by placing them in the menu My shortcuts. See
“My shortcuts” on page 25.
Help texts
More information, explanations or tips about selected
menus or functions are available in your phone.
To get help
1. Select the menu or function and press
2. Select Help (if available), YES.
Delete, edit and rename
If you add items, for example, a contact, an event or a
WAP bookmark, it can be deleted, edited or renamed.
There are two ways to delete items:
• Select an item and press
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
11
• Select an item, press
, select Delete or Delete all.
To edit items:
• Select an item, press
, select Edit.
Online services
Online services are customized services
offered by network operators, independently
of mobile phones and mobile phone
manufacturers.
A SIM card which supports Online services works
in the same way as a normal SIM card. When you have
inserted your SIM card and turned on your phone, your
network operator can download data to your SIM card.
When you restart your phone after the first data
download, a new submenu appears under the Connect
menu.
To enter your new menu system
• Scroll to Connect, YES, Online services, YES.
Note: This menu only appears if your SIM card
supports this service. Some operators may not use the
name “Online services”. Your phone may not support
all of the services offered.
12
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
Menu overview
(1) Phone book
(2) Messages
(3) Calls
1 Call contact
2 Add contact
3 Manage contact
4 Pictures
5 Personal rings
6 Special numbers
7 Advanced
8 Options
Find and send*
1 Text
2 Multimedia
3 Call voice mail
4 E-mail
5 Chat
6 Area info
7 Options
1 Missed calls
2 Call list
3 Manage calls
4 Time & cost
5 Next call
6 Options
Calling local**
Switch to line 1**
Switch to line 2**
(4) Fun & Games
(5) Settings
(6) WAP Services
1 Games
2 My pictures
3 My sounds
4 Themes
5 Download**
6 Composer
7 Sound recorder
8 CommuniCam
1 Sounds & alerts
2 Profiles
3 Display
4 Language
5 Time & date
6 Locks
7 Handsfree
8 Master reset
1 Sony Ericsson
2 Bookmarks
3 Push inbox
4 Enter address
5 Resume
6 Select profile
7 Advanced
8 Options
or Ongoing call*
1 Record*
2 Turn off tones*
3 Hold call*
4 Switch calls*
5 Release active*
6 Join calls*
7 Transfer call*
8 Release all*
Extract part*
Release part*
Parties in conf.*
Calls*
(7) Organizer
1 Events
2 Alarms
3 Timer
4 Stopwatch
5 Calculator
Note:
(1) Main menu numbering
does not appear.
1 Menu numbering may
change with certain functions
or services.
*Only available during a call
or conference call.
**Network- and subscriptiondependent.
(8) Connect
(9) My shortcuts
1 Infrared port
2 GSM Networks
3 Data comm.
4 Accessories
Online services**
1 Select profile
2 Ring volume
3 Switch to line 1**
4 My numbers
5 Edit shortcuts
Getting to know your phone
This is the Internet version of the user's guide. © Print only for private use.
13
Entering letters and characters
You can enter letters, for example, when you add
names to the phone book, write text messages or enter
WAP addresses.
Apart from the way you normally enter letters in
your phone, using multitap text input, you can use
T9™ Text Input for entering text messages and email, for example, if the input language you select
supports this. T9 Text Input is a predictive input
method and is a quicker way to write texts.
Input languages
Before you start entering letters, you need to select the
input languages that you want to use when writing.
To select input languages
1. Scroll to Settings, YES, Language, YES, Input, YES .
2. Scroll to the language or alphabet that you want to use
for entering letters and press
for each language
you want.
3. Press YES to exit the menu.
When writing, you can switch to one of your selected
input languages by pressing
and then selecting
Language. See “The list of options” on page 16.
Multitap text input
When saving names in the phone book or when writing
WAP addresses, you enter letters using multitap text
input. You press each key as many times as needed to
show the letter you want. The following example
shows how to write a name in the Phone book.
To enter letters using multitap text input
1. Scroll to Phone book, YES, Add contact, YES , YES again.
2. Press the appropriate key,
–
or
repeatedly until the character you want appears.
You can view the characters in the row that appears
briefly at the top of the display when you press a key.
Note: Your selection of input languages and character
or numeric input methods determines what you can see
or enter.
See the Latin alphabet, abc, table below:
Press…
to see/enter…
-?!‚.:;"’<=>()_1
ABCÅÄÆàÇ2Γ
DEFèÉ3∆Φ
GHIì4
14
This is the Internet version of the user's guide. © Print only for private use.
Press…
to see/enter…
JKL5Λ
MNOÑÖØò6
PQRSß7ΠΣ
TUVÜù8
WXYZ9
+&@/¤%$€£¥\§¿¡0Θ Ξ Ψ Ω
Space # * ↵ ¶
to delete letters and numbers
to shift between capital and lowercase letters
press and hold to enter numbers
Example:
• To enter an ‘A’, press
once.
• To enter a ‘b’, quickly press
twice.
• To shift between capital and lower-case letters, press
, then enter the letter.
Tip: You can also use the volume key as a shortcut to
certain letters: To enter a ‘B’, slide the volume key up
and hold it whilst pressing
. To enter a ‘C’, slide
the volume key down and hold it whilst pressing
T9™ Text Input
You can use T9™ Text Input when writing, for
example, text messages and e-mail. The T9™ Text
Input method uses a built-in dictionary to recognize the
most commonly used word for each sequence of key
presses. This way, you press each key only once, even
if the letter you want is not the first letter on the key.
Note: A language must be selected to be able to use the
T9™ Text Input method.
The following example shows how to start writing a
text message:
To enter letters using T9™ Text Input
1. Scroll to Messages, YES, Text, YES , Write new, YES .
2. For example, if you want to write “Jane”, press
. A list of alternative words or
candidates are shown.
15
This is the Internet version of the user's guide. © Print only for private use.
3. Scroll
to select Jane.
4. When the list is shown, select from the following:
• press
or YES to accept without a space or
• press
to accept and add a space.
If the candidates do not include a word you want, you
can add a new word to the list whilst selecting.
To add a word to candidates
1. Scroll to a similar candidate to the word you want to
add, press
, select Edit word, YES .
2. Press
repeatedly to delete one letter at a time.
Write the new word using multitap text input, YES.
The word is added to the dictionary. The next time you
enter the word you just added to the dictionary, it
appears as one of the alternative words.
3. Continue writing your message. See also “Sending text
messages” on page 52.
Tip: Press
to enter a full stop. To enter other
or
punctuation marks, press
and then
repeatedly. Press
to accept and add a space.
Press and hold
to select an input method for the
text you are currently writing.
•
•
•
•
•
•
•
•
The list of options
Press
when writing to enter a list of options:
Add symbol – Symbols and punctuation marks such as
? and , are shown. Move between the symbols by using
the joystick.
Insert item – Add a picture, sound effect, melody or
animation to a message.
Edit word – For T9™ Text Input only
Edit the suggested word by using multitap text input.
Text format – Edit size, style, alignment or start a new
paragraph.
Language – Show the input language selected earlier.
Input method – A list of input methods available for
the current input language is shown.
Candidates – For T9™ Text Input only
Turn on/off the alternative words list.
Help.
To turn T9™ Text Input on or off
• Scroll to Settings, YES, Language, YES, T9 input, YES or
press and hold
when writing.
Note: Changing Settings/Language/T9 input is valid
for all input of texts – not only for the text you are
currently writing.
16
This is the Internet version of the user's guide. © Print only for private use.
Personalizing your phone
“The infrared (IR) port” on page 26 or “Messaging” on
page 51.
You can adjust the phone settings to suit your own
requirements.
Note: If you change a setting which is included in a
profile, the active profile is also changed. See
“Profiles” on page 25.
Themes
You can change the appearance of the display, for
example, the colors and background picture, by using
themes. Your phone comes with a number of preset
themes. You cannot delete these, but you can create
new themes and download them to your phone. For
more information, visit www.SonyEricsson.com or
wap.SonyEricsson.com/.
To select a theme
• Scroll to Fun & Games, YES , Themes, YES .
Exchanging themes
You can send and receive a theme via IR and a
multimedia message or download it via WAP. For
more information on sending themes in messages, see
1.
2.
3.
4.
To send a theme
Scroll to Fun & Games, YES, Themes, YES.
Select a theme, press
Select Send, YES.
Select a transfer method, YES.
Note: You are not allowed to exchange copyrightprotected material.
To receive and save a theme
1. From standby, press
, scroll to Activate IR, YES.
2. When you receive the theme, press YES to save it in
Themes.
You can also save a theme from an incoming
multimedia or e-mail message. See “Messaging” on
page 51.
Note: If you need to adjust the display contrast, scroll
to Settings, YES , Display, YES, Contrast, YES.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
17
•
•
•
•
•
Pictures
Your phone comes with a number of pictures. You can:
Set a picture as a background when in standby mode.
Set a picture as a screen saver.
Assign a picture to a contact in the phone book. When
that person calls, the picture appears in the display
(provided your subscription supports Caller ID
service). See “To add a picture to a phone book
contact” on page 30.
Enclose a picture in a text message.
Send a picture via IR, Text, Multimedia or e-mail.
All pictures and are saved in Fun & Games/
My pictures.
Handling pictures
You can also add, delete or rename pictures in
My pictures. The number of pictures that can be saved
depends on the size of the pictures. File types
supported are GIF, JPEG and WBMP.
To view your pictures
• Scroll to Fun & Games, YES , My pictures, YES.
The pictures are shown in thumbnail view. To get a full
view, press YES .
18
Note: Animations for multimedia messages can be
viewed in My pictures. Animations for text messages
can only be viewed when inserting an item in a text
message. See “To insert an item in a text message” on
page 52.
To view your camera pictures (if connected)
• Scroll to Fun & Games, YES, CommuniCam, YES or
• Scroll to Connect, YES , Accessories, YES.
To select a picture as background
1. Scroll to Settings, YES , Display, YES, Background, YES.
2. Select Select picture, YES .
3. Select a picture, YES.
Tip: When viewing your pictures in Fun & Games/My
pictures, you can set a background by pressing
To turn the background picture On or Off
• Scroll to Settings, YES, Display, YES, Background, YES ,
Activate, YES .
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
Exchanging pictures
You can send pictures via IR, Text, Multimedia or
e-mail and receive via IR, Text or Multimedia. For
more information on sending pictures in messages, see
“Messaging” on page 51.
• When you receive a picture via a message, a new
message appears in your Inbox. Highlight the picture
in the message by moving the joystick to select it,
press
and select Save to save in My pictures.
Screen saver
The phone has a screen saver, which is activated
automatically when the phone has been in idle mode
for a few seconds. After a short period of time the
screen saver changes to sleep mode, to save power.
Note: You are not allowed to exchange copyrightprotected material.
To send a picture
1. Scroll to Fun & Games, YES , My pictures or
CommuniCam, YES .
Note: The CommuniCam™ menu is only available
when the CommuniCam™ is attached.
2. Select a picture, YES. Press
3. Select Send, YES .
4. Select a transfer method.
To turn the screen saver On or Off
• Scroll to Settings, YES, Display, YES, Screen saver, YES,
Activate, YES.
To receive and save a picture
1. From standby, press
, scroll to Activate IR, YES .
2. When you receive the picture, press YES to save it in
My pictures.
1.
2.
3.
4.
To use a picture as the screen saver
You can select a picture, saved in the phone, and use it
as the screen saver.
Scroll to Settings, YES, Display, YES, Screen saver, YES .
Scroll to Select picture, YES.
Scroll to the picture you want to use as the screen
saver, YES.
Press YES to save.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
19
Tip: When viewing your pictures in Fun & Games/My
pictures, you can set a screen saver by pressing
Ring signals and melodies
Your phone comes with a number of standard and
polyphonic melodies which can be used as ring
signals. See “Icons” on page 85 for more information.
You can create and edit standard melodies, and send
them to a friend, in a text or multimedia message. You
can also exchange standard melodies via IR or
download them via WAP.
Note: You are not allowed to exchange copyrightprotected material.
To select a ring signal
• Scroll to Settings, YES, Sounds & alerts, YES, Ring
signals, YES .
To set the ring signal volume
1. Scroll to Settings, YES, Sounds & alerts, YES, Ring
volume, YES.
2. Press
or
to increase or decrease the volume.
3. Press YES to save the setting.
20
Warning! Exposure to a loud ring volume may
damage hearing. Answer the call or lower the volume
before placing the phone to your ear.
To turn the ring signal on or off
• Press
or press and hold
from standby and
select Turn on silent or Turn off silent.
All signals except the alarm and timer signals are
turned off.
To compose a ring signal or melody
1. Scroll to Fun & Games, YES, Composer, YES .
• Press a key to enter a note.
• Press
or
to make
the note shorter or longer.
There are six different lengths
of notes.
• Press
to change octave.
• Press
once to lower the
note one semi-tone.
• Press
twice to raise the note one semi-tone.
• Press
to add a melody effect, and to set the
tempo, volume, style and duration.
• Press
to remove notes.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
2. To listen to your melody, press YES.
3. Press YES again to save and name it, or press NO to
continue composing.
Note: To edit a melody, scroll to Fun & Games, YES,
My sounds, YES , select the melody and press
1.
2.
3.
4.
To use the piano
In the Composer, slide the
volume key up to activate
the piano.
Use the joystick to move
between the keys.
Press YES to select a note. See “Icons” on page 85.
Slide the volume key
down to deactivate the piano.
Exchanging melodies
You can send and receive a sound or melody via IR,
text or multimedia messages, or download it via WAP.
Note: You cannot exchange a polyphonic melody via
text messages.
1.
2.
3.
4.
To send a melody
Scroll to Fun & Games, YES, My sounds, YES.
Select a melody and press
Select Send, YES.
Select a transfer method.
Note: To send a ring signal or melody in a text
message, see “To insert an item in a text message” on
page 52.
To receive a sound or melody
1. From standby, press
, scroll to Activate IR, YES.
2. When you receive the sound or melody, press YES to
save it in My sounds.
You can also save a sound from an incoming
multimedia or e-mail message. See “Messaging” on
page 51.
Increasing ring
You can choose a ring signal that rises in steps from
the lowest volume to the highest.
To turn increasing ring On or Off
• Scroll to Settings, YES, Sounds & alerts, YES,
Increasing ring, YES .
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
21
Specific ring signals for personal calls
If you subscribe to the Two Line Service, you
can set different ring signals for the two voice
lines. Line 1 and Line 2 are displayed instead
of Voice calls.
If your subscription includes Caller ID service, you
can assign a personal ring signal to numerous callers.
To set a specific ring signal for a caller
1. Scroll to Phone book, YES , Personal rings, YES, Add
new?, YES.
2. Enter the first letter of the contact name, YES.
3. Select a contact, YES.
4. Select a ring signal, YES .
Sounds & alerts
You can choose to be notified of an incoming call by
the buzzing of the vibrating alert. You can set the
phone’s vibrating alert to one of the following:
• On – all the time.
• On if silent – on when the ring volume is turned off or
when you have set the phone to silent.
• Off – all the time.
22
To set the vibrating alert
1. Scroll to Settings, YES, Sounds & alerts, YES, Vibrating
alert, YES.
2. Select the setting you want, YES.
From Settings/Sounds & alerts, you can also select:
• Message alert when messages are received.
• Key sound when using the keypad.
• Minute minder to beep after every minute during calls.
Menu language
Most SIM cards automatically set the menu language
to the language of the country where you bought your
SIM card. If this is not the case, the preset language is
English.
To change the menu language
1. Scroll to Settings, YES , Language, YES , Menus, YES.
2. Select a language, YES.
Note: You can always choose Automatic by pressing
8888
in standby.
You can always choose English by pressing
0000
in standby.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
Display light
The display light can be set to automatic, off or on. In
automatic mode, the display light is turned off a few
seconds after you press the last key.
Note: If you select the 12-hour clock, you can
alternate between am and pm by pressing
when
setting the time.
Note: The display light consumes extra battery power
and reduces standby time, if set to On.
Date
When the phone is in standby mode, you can slide the
volume key up or down to see today’s date in the
Status menu. Press NO or wait to return to standby.
To set the display light
• Scroll to Settings, YES, Display, YES, Light, YES.
To set the display contrast
• Scroll to Settings, YES, Display, YES, Contrast, YES.
Time settings
The time is always displayed in standby.
To set the time
• Scroll to Settings, YES, Time & date, YES , Set time, YES.
You can choose a 12-hour clock or a 24-hour clock.
To set the time format
• Scroll to Settings, YES, Time & date, YES, Time format,
YES.
To set the date and/or date format
• Scroll to Settings, YES, Time & date, YES .
Advanced time settings
Under Advanced in the Settings/Time & date
menu, you can set time zone and daylight
saving time. Changing these, changes the
time accordingly, if your network operator supports
this service.
When your phone changes network, and the time
sent out from the network operator deviates from the
time in your phone, you are asked whether you want to
update the time if you have turned on Auto time zone.
If you press YES, the time is updated automatically.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
23
Note: Contact your network operator for more
information.
Answering mode
When using a portable handsfree kit, you can choose to
answer a call by pressing any key (except the NO key)
or set the phone to answer the call automatically.
To select answering mode
• Scroll to Settings, YES, Handsfree, YES, Answering
mode, YES.
User greeting
When you turn your phone on or off, the Sony Ericsson
greeting appears. Your network operator’s own
greeting may be shown instead.
To select a greeting
1. Scroll to Settings, YES, Display, YES, User greeting,
YES.
2. Select a greeting, YES.
My phone numbers
You can check your own phone number(s).
24
To check your phone number
• Scroll to Phone book, YES, Special numbers, YES,
My numbers, YES. If your number is not saved on your
SIM card, you can enter it yourself.
Keypad lock
You can lock the keypad to avoid dialing a number by
accident.
To lock the keypad manually
• Press
or press and hold
select Lock keypad, YES.
in standby, and
The keypad remains locked until you answer an
incoming call or until you unlock the keypad manually.
Note: Calls to the international emergency number
112 can still be made, even when the keypad is locked.
To unlock the keypad
• Press
, YES to unlock the keypad.
Automatic keypad lock
Automatic keypad lock means the keypad locks a short
while after you last press a key.
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
To turn automatic keypad lock On or Off
• Scroll to Settings, YES, Locks, YES, Auto keylock, YES.
My shortcuts
You can place your favorite functions that you want to
reach quickly and easily in the My shortcuts menu.
To add a function to my shortcuts
1. Scroll to My shortcuts, YES, Edit shortcuts, YES .
2. Select a function from the list by pressing
3. Enter the position number you want for this function in
your menu and press YES.
4. Press YES to exit the list.
Profiles
Your phone has a number of preset profiles which are
set to suit a certain environment. You can add
accessories to, rename or change these profiles. For
example, when you go to a meeting, you can simply
choose the Meeting profile and a number of settings
such as the ring signal are turned off.
Note: Accessories may change the selected profile in
your phone automatically. For example, when using a
portable handsfree the profile switches from Normal to
Port h-free. The profile should automatically change
back when the accessory is disconnected.
To select a profile
• Scroll to Settings, YES, Profiles, YES , Select profile,
YES .
To change a profile setting
1. Scroll to Settings, YES, Profiles, YES, Edit profile, YES.
2. Select a setting, YES .
3. Change the profile settings and press YES to confirm.
To rename a profile
• Scroll to Settings, YES, Profiles, YES, Edit profile, YES ,
Profile name:, YES.
You can reset all profile settings to the default or the
way they were set when you bought your phone; for
example, Normal.
To reset all profiles
• Scroll to Settings, YES, Profiles, YES, Reset profiles,
YES .
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
25
Automatic activation
Some profiles, for example In car, are automatically
activated when used with a specific accessory. When
disconnected, the profile is changed back.
Master reset
You can reset all the settings in the phone to the way
they were when you bought your phone by selecting
Reset settings.
If you also want to delete all contacts, messages and
other personal data, such as games that you may have
downloaded, select Reset all instead.
Note: If you select Reset all, some pictures, melodies
and templates which came with your phone are
deleted.
1.
2.
3.
4.
26
To reset the phone
Scroll to Settings, YES, Master reset, YES .
Select Reset settings or Reset all, YES.
Press YES to continue.
Enter the phone lock code (0000 or the new code if you
have changed it) and press YES.
The infrared (IR) port
The infrared port can be used to transfer and exchange
information with another device equipped with an
infrared port. See “Getting to know your phone” on
page 8 to locate the infrared port.
When used with certain functions, such as sending a
picture, it is automatically activated for 10 minutes.
The infrared port can be activated in the following
ways:
• Press
from standby, scroll to Activate IR, YES.
• Scroll to Connect, YES , Infrared port, YES , select an
option, YES.
• When selecting a transfer method, for example when
sending a picture.
Note: Infrared ports must be facing each other at a
distance of up to 20 cm (7 to 8 inches) when used.
To turn infrared off
• Scroll to Connect, YES , Infrared port, YES , Off, YES .
Personalizing your phone
This is the Internet version of the user's guide. © Print only for private use.
Calling
Before you can make or receive any calls, you must
turn on the phone and be within range of a network.
See “Making and receiving calls” on page 7.
Making calls
1. Enter the area code and the phone number.
2. Press YES to make the call.
3. Press NO to end the call.
Tip: You can call numbers from the call list and the
phone book. See “Call list” on page 29 and “Phone
book” on page 29.
To change the earpiece volume during a call
• Slide the volume key on the side of the phone up or
down to increase or decrease the earpiece volume.
To turn off the microphone during a call
• Press and hold
until the display shows Muted.
Press
again to resume the conversation.
Automatic redialing
If the connection of the call failed and the display
shows Retry?, press YES .
Note: Do not hold the phone to your ear while waiting.
When the call is connected, the phone gives a loud
signal.
The phone redials the number (up to ten times) or until:
• The call is connected.
• You press a key or receive a call.
Note: Automatic redialing is not available for data
calls.
Making international calls
1. Press and hold
until a + sign appears in the
display.
The + replaces the international prefix number of the
country from which you are calling.
2. Enter the country code, area code (without the leading
zero) and phone number, YES.
Note: The microphone must be turned on to change the
earpiece volume during a call.
Calling
This is the Internet version of the user's guide. © Print only for private use.
27
Tip: It is useful to enter the + sign and country code
for all numbers in the phone book as they can then be
easily used whether home or abroad.
Emergency calls
To make an emergency call
• Enter 112 (the international emergency number), YES.
Your phone supports the international emergency
numbers, 112, 911 and 08. This means that these
numbers can normally be used to make an emergency
call in any country, with or without a SIM card
inserted, if a GSM network is within range.
Note: Some network operators may require that a SIM
card be inserted, or in some cases, that a correct PIN
be entered in order to make an emergency call.
In some countries, other emergency numbers may also
be promoted. Your operator may therefore have saved
additional local emergency numbers on the SIM card.
To view your local emergency numbers
• Scroll to Phone book, YES , Special numbers, YES,
Emergency nos., YES.
28
Receiving calls
When you receive a call, the phone rings and Answer?
appears.
If your subscription includes Caller ID service and
the caller’s number is identified, the number appears.
If you have saved the number in your phone book, the
name and number appear.
If the number is a restricted number, Withheld
appears.
To answer a call
• Press YES.
To reject a call
• Press NO.
Missed calls
If you have missed a call, Missed calls:1 appears in
standby, indicating the number of missed calls.
To check your missed calls
1. When Missed calls:1 is displayed, press YES to display
the missed calls.
2. To call a number from the list, scroll to the number,
YES.
Calling
This is the Internet version of the user's guide. © Print only for private use.
Note: The most recent missed call is first on the list,
and the oldest call is last. Scroll
to select and/or
press
to show the time if the call occurred on the
same day. Otherwise, only the date appears for older
missed calls.
Call list
The numbers of the last 30 calls that you have made or
received are saved in the call list. If your subscription
includes Caller ID service and the caller’s number is
identified, you will also find the numbers of answered
and missed calls in the call list.
To call a number from the call list
1. To enter the call list, press YES from standby.
2. Scroll to the number you want to call, YES.
To clear the call list
• Scroll to Calls, YES , Options, YES, Clear call list, YES .
To turn the call list on or off
• Scroll to Calls, YES , Options, YES, Call listing, YES.
Phone book
Contacts
You can save information needed to contact people in
the phone book on your phone. These entries are saved
as contacts in your phone’s memory.
You can save up to 250 contacts in your phone’s
memory. This depends on the amount of information in
each contact. A contact must include a name and can
include one or more of the following; a home, work,
mobile phone number or an e-mail address.
SIM card
You can also copy contacts in the phone book
to your SIM card and call from the SIM card.
See “Copying contacts” on page 33 for more
information.
On your SIM card, entries are saved as a name with
a single number. The total depends on the amount of
memory available, see Phone book/Advanced/Memory
status.
Note: Contact your network operator or service
provider for more information.
Calling
This is the Internet version of the user's guide. © Print only for private use.
29
1.
2.
3.
4.
To add a contact
Scroll to Phone book, YES , Add contact, YES.
Scroll to the field you want to fill in, press YES.
Enter the information, YES .
When you have entered the information, scroll to
Save and exit?, YES.
To add a picture to a phone book contact
1. Scroll to Phone book, YES, Pictures, YES .
2. Enter the first letters of the contact, YES.
3. When the contact is highlighted, press YES.
This takes you to My pictures. Select a picture and
press YES twice.
Tip: To enter an unsaved number, when you are in a
number field, press
and select a number from the
unsaved numbers list, YES.
• Select Personal rings to add a personal ring signal.
Ask to save
The phone can prompt you to add the number of the
last person you talked to, to your contacts.
To ask to save numbers in contacts
1. Select Phone book, YES, Options, YES, Ask to save, YES.
2. Select On, YES .
Pictures and personal rings
You can add a picture and personal ring signal to a
contact.
To call a contact from your contact list
1. From standby, press and hold one of the number keys
2-9 to find a contact beginning with the first letter on
that key (or closest following).
• For example, press and hold 5 to go to the first
contact beginning with “J”. To go to a contact
beginning with “L” press 5 three times after you
have entered the list of contacts.
2. When the contact you want to call is highlighted, press
YES.
3. Select the number you want to call, YES.
If only one number is linked to the contact, press
and hold YES at step 2.
Tip: You can also use the Call contact option in the
Phone book menu to call a contact.
30
Calling
This is the Internet version of the user's guide. © Print only for private use.
To call from your SIM card
1. Scroll to Phone book, YES, Advanced, YES , Call from
SIM, YES .
2. Press one of the number keys (2-9) to find a SIM card
entry beginning with the first letter on that key (or
closest following).
3. When the SIM card entry you want to call is
highlighted, press YES.
Updating the phone book
When needed, you can easily update or delete any
contact information.
1.
2.
3.
4.
5.
6.
7.
To edit a contact
Scroll to Phone book, YES, Manage contact, YES, Edit
contact, YES.
Enter the first letters of the contact, YES.
When the contact is highlighted, press YES.
Select Edit info, YES .
Scroll to the field you want to fill in, YES.
Enter the information, YES.
When you have entered the information, scroll down to
Save and exit?, YES.
To delete a contact
• Scroll to Phone book, YES , Manage contact, YES ,
Delete contact, YES . Then select the contact and press
YES twice.
To delete all contacts
• Scroll to Phone book, YES , Advanced, YES, Delete all,
YES .
Note: Numbers that are saved on the SIM card are not
deleted.
Default (standard) number
Each contact has a default phone number. The first
phone number you link to a contact automatically
becomes the default number. If you scroll to a certain
contact in the Call contact list and then press and hold
YES , the default number is dialed.
To set the default number
1. Scroll to Phone book, YES , Manage contact, YES ,
Edit contact, YES.
2. Enter the first letter of the contact, YES.
3. When the contact is highlighted, press YES.
4. Select Default number, YES . Select the number you
want as default, YES.
Calling
This is the Internet version of the user's guide. © Print only for private use.
31
Groups
You can create a group of contacts. By doing so you
can send text messages to several recipients at the
same time. See “Sending text messages” on page 52.
1.
2.
3.
4.
5.
6.
7.
To create a group of contacts
Scroll to Phone book, YES , Manage contact, YES,
Groups, YES, Add group?, YES.
Enter a name for the group, YES.
Select Add member?, YES.
Enter the first letters of the contact you want to add,
press YES.
Press YES to select the contact.
Select a phone number, press YES .
Repeat steps 3-6 to add more members.
Business cards
You can add your own business card to the phone book.
To add your own business card
• Scroll to Phone book, YES , Manage contact, YES,
My card, YES. Select Add, YES .
32
Exchanging business cards
You can exchange business cards via IR, text or
multimedia messages.
To send your business card
1. Scroll to Phone book, YES, Manage contact, YES ,
My card, YES , Send, YES .
2. Select a transfer method, YES.
To receive a business card via IR
1. From standby, press
, scroll to Activate IR, YES.
When you receive the business card, press YES.
2. Press YES again to save the card in the phone book.
To save a business card in a multimedia message
1. Scroll to Messages, YES , Multimedia, YES.
2. Scroll to Inbox, YES, select the message, YES.
3. Scroll to the business card item, press YES to accept it.
To send a contact
1. Scroll to Phone book, YES, Manage contact, YES ,
Send contact, YES .
2. Enter the first letters of the contact you want to send,
YES.
3. Press YES to select the contact.
4. Select transfer method, YES .
Calling
This is the Internet version of the user's guide. © Print only for private use.
To send all contacts (via IR only)
• Scroll to Phone book, YES, Advanced, YES , Send all,
YES.
To copy names and phone numbers to the phone
• Scroll to Phone book, YES, Advanced, YES , Copy from
SIM, YES.
Copying contacts
You can copy the names and numbers in your phone
book between your phone’s memory and the SIM card.
The number of phone numbers that can be saved
depends on the type of SIM card.
Tip: When you have selected a name in the Call from
SIM menu, you can copy name and phone number to
the phone by pressing
and then selecting Copy to
phone.
Note: Be careful not to replace details by mistake
when copying contacts.
Speed dialing
You can save the phone numbers that you want to
reach easily in positions 1-9 on your SIM card.
To copy names and phone numbers to the SIM
card
• Scroll to Phone book, YES, Advanced, YES , Copy to
SIM, YES .
Note: Everything on the SIM card is replaced.
If you insert a SIM card with saved names and phone
numbers in your phone, you can call a person by
selecting Phone book, YES , Advanced, YES, Call from
SIM, YES . If you want to edit a name or phone number
saved on the SIM card, you first need to copy it to the
phone.
To call any of these phone numbers from standby
• Enter the position number and press YES.
To change position numbers
1. Scroll to Phone book, YES , Advanced, YES, Position
list, YES .
2. Select the phone number you want to move, YES .
3. Select the position to which you want to move the
phone number, press YES.
4. When finished press NO to exit and then YES to save to
SIM.
Calling
This is the Internet version of the user's guide. © Print only for private use.
33
Voicemail
If your subscription includes an answering
service, callers can leave a voicemail message
when you cannot answer a call.
Receiving a voicemail message
Depending on your network operator, you are
informed that someone has left a message by a text
message or by a voicemail indication. Press YES to
listen to the message.
Calling your voicemail service
You can easily call your voicemail service by pressing
and holding
, if you have saved your voicemail
number in the phone. You get the number from your
service provider.
To enter a voice mail number
• Scroll to Messages, YES, Options, YES, Voice mail no.,
YES.
Call time
During a call, the duration of the call is shown in the
display.
34
You can check the duration of your last call, outgoing
calls and the total time.
To check the call time and reset
• Scroll to Calls, YES, Time & cost, YES, Call timers and
select an option, YES.
• Select Reset timers to reset the call time meter.
Call cost
For cost information you need to verify with
your network operator or service provider
whether you can subscribe to such a service,
where call cost (or the number of call units) is
displayed.
If you have a subscription with a cost information
service, you can check the cost of your last call and the
total cost of your calls.
To check the call cost and reset
• Scroll to Calls, YES, Time & cost, YES, Call costs and
select an option, YES.
• Select Clear total cost to reset the call cost meter.
Calling
This is the Internet version of the user's guide. © Print only for private use.
Note: If you subscribe to cost information, you must
enter your PIN2 to clear the cost or time counter.
Setting the call cost
You can use the Tariff function to specify the price per
call unit. If you do not specify a price per call unit, the
number of call units is displayed.
To enter the price per call unit
1. Scroll to Calls, YES , Time & cost, YES, Call costs, YES ,
Set tariff, YES.
2. Enter your PIN2, YES.
3. Select Change, YES.
4. Enter the code for the currency you want (for example
USD for US Dollars), YES.
5. Enter the price per call unit, YES.
To enter a decimal point, press
Credit limit for calls
You can enter a total amount of money that
can be used for making calls. When the
amount reaches zero, no more calls can be
made. Please note that the credit limit is only an
estimated value.
To set a credit limit
1. Scroll to Calls, YES, Time & cost, YES , Call costs, YES,
Set credit, YES.
2. Enter your PIN2, YES.
3. Select Change, YES.
4. Enter an amount, YES.
See “Security” on page 70 for more information about
PIN2.
Forwarding calls
If you cannot answer incoming voice or data
calls, you can forward them to another
number, for example your answering service.
For voice calls, you can choose between the
following forwarding alternatives:
• Always forward – forward all voice calls.
• When busy – forward calls if you are already on the
phone.
• Not reachable – forward calls if your phone is
turned off or if you are unreachable.
• No reply – forward calls that you do not answer
within a specified time limit (operator-dependent).
Note: When the Restrict calls function is on, some
Forward calls options cannot be activated.
Calling
This is the Internet version of the user's guide. © Print only for private use.
35
To turn on a call forward
1. Scroll to Calls, YES , Manage calls, YES , Forward calls,
YES.
2. Select a call category and then a forwarding
alternative, YES.
3. Select Activate, YES .
4. Enter the phone number to which you want your calls
to be forwarded and press YES, or retrieve it from the
phone book.
More than one call
You can handle more than one call
simultaneously. For example, you can put an
ongoing call on hold, while you make or
answer a second call, and then switch between the two
calls.
To turn off a call forward
• Select a forwarding option and select Cancel.
Call waiting service
If the call waiting service is activated, you hear a beep
in the earpiece if you receive a second call during an
ongoing call.
To check status
1. Scroll to Calls, YES , Manage calls, YES , Forward calls,
YES.
2. Select a call type, YES.
3. Scroll to the forward you want to check, YES. Select
Get status, YES.
To check the status of all call forwards
• Select Check all in the Forward calls menu.
Note: During a call the Ongoing call menu replaces
the Calls menu.
To activate or deactivate the call waiting service
• Scroll to Calls, YES, Manage calls, YES , Call waiting,
YES.
To make a second call
1. Press YES to put the ongoing call on hold.
2. Enter the number you want to call and press YES , or
retrieve a number from the phone book.
Note: You can only put one call on hold.
You can also reach different options by pressing
36
Calling
This is the Internet version of the user's guide. © Print only for private use.
Receiving a second call
• To answer the second call and put the ongoing call on
hold, press YES .
• To reject the second call and continue the ongoing call,
press
, select Busy.
• To answer the second call and to end the ongoing call,
press
, select Release&answer.
•
•
•
•
•
Handling two calls
When you have one ongoing call and one call on hold,
you can do the following:
Press YES to switch between the two calls.
Press
, then select Join calls to join the two calls
into a conference call.
Press
, then select Transfer call, to connect the
two calls. You are disconnected from both calls.
Press NO to end the ongoing call, then press YES to
retrieve the held call.
Press NO twice to end both calls.
Note: You cannot answer a third call without ending
one of the first two calls.
Conference calls
You can have a joint conversation (conference
call) with up to five people. You can also put
a conference on hold and make another call.
Note: There may be additional charges for calls
involving multiple parties. Contact your service
provider for more information.
Creating a conference call
To create a conference call, you must first have one
ongoing call and one call on hold.
To join the two calls into a conference call
• Scroll to Ongoing call, YES, Join calls, YES.
To add a new participant
1. Press YES to put the conference call on hold.
2. Call the next person you wish to include in the
conference call.
3. Press
, select Join calls, YES.
Repeat steps 1 to 3 to include more participants.
Calling
This is the Internet version of the user's guide. © Print only for private use.
37
To release a participant
1. Press
, select Release part, YES .
2. Select the participant, YES.
To end the conference call
• Press NO.
Having a private conversation
You can have a private conversation with one of the
participants and put the other participants on hold.
• Press
, then select Extract part to select the
participant that you want to talk with.
• Select Join calls to resume the conference call, again.
Two voice lines
Your phone may have two voice lines with
different phone numbers. This may be useful
if, for example, you want to keep business
calls and private calls on separate lines.
To select a line
• Scroll to Calls, YES, Next call, YES.
All outgoing calls are made on this line until you
change it. Incoming calls can still be received on either
line.
You can change the names of the lines, and have
different settings for each line, for example, different
ring signals.
To change the name of a line
• Scroll to Settings, YES , Display, YES, Edit line tags,
YES.
Calling card calls
You can use the calling card service to
redirect the cost of a call to a credit card or a
calling card account, instead of your normal
account. This may be useful, for example, when
making long distance calls.
You can save two separate calling card numbers. The
numbers and the codes associated with them are
protected by the code.
Before making a calling card call, you need to select
and activate a card.
Note: You cannot use the calling card service for
data calls.
38
Calling
This is the Internet version of the user's guide. © Print only for private use.
To turn the calling card service on or off
1. Scroll to Calls, YES , Time & cost, YES, Calling cards,
YES, Use callingcards, YES.
2. Enter your phone lock code, YES.
3. Select On or Off, YES .
See “Security” on page 70 for more information.
To save a card number
1. Scroll to Calls, YES , Time & cost, YES, Calling cards,
YES, My cards, YES.
2. Enter your phone lock code, YES.
3. Select Add new?, YES.
Enter the card settings (the access number and name of
the calling card server, and the verification code). You
get this information from your card provider. Select
which you want to send first – the number that you
want to call, or the verification code. Press YES to
confirm your choice.
To select a card
1. Scroll to Calls, YES , Time & cost, YES, Calling cards,
YES, My cards, YES.
2. Enter your phone lock code, YES.
3. Select a card, YES.
4. Select Activate card, YES.
See “Security” on page 70 for more information.
To make a calling card call
1. Enter the phone number of the person you want to call,
or retrieve the number from the phone book.
2. Press and hold YES.
The access number of the calling card server is called.
3. During the connecting phase, you are asked:
• Send called number? Press YES to send the phone
number you want to call.
• Send verification number? Press YES to send the
verification code.
Alternatively, if you wait a few seconds, the number
and code are sent automatically.
Restricted dialing
You can use the restrict calls service to restrict
outgoing and incoming calls. This may be
useful, for example, when you are abroad. To
use this service, you need a password which you get
from your service provider.
Note: If you forward incoming calls, you cannot
activate some Restrict calls options.
Calling
This is the Internet version of the user's guide. © Print only for private use.
39
The following calls can be restricted:
• All outgoing calls – All outgoing.
• All outgoing international calls – Outgoing Intl.
• All outgoing international calls except to your home
country – Outg. intl roam.
• All incoming calls – All incoming.
• All incoming calls when you are abroad (when
roaming) – Inc. when roam.
To turn a call restriction on or off
1. Scroll to Calls, YES, Manage calls, YES, Restrict calls,
YES.
2. Select an option, YES.
3. Select Activate or Cancel, YES.
4. Enter your PIN, YES.
• To turn off all call restrictions, select Cancel all.
• To change the password, select Change passwd.
Fixed dialing
The fixed dialing function allows calls to be
made only to certain numbers saved on the
SIM card. Fixed dialing requires a SIM card
that allows fixed numbers to be saved. The fixed
numbers are protected by your PIN2.
40
Note: Calls to the international emergency number
112 can still be made, even when the fixed dialing
function is on.
• Partial numbers can be saved. For example, saving
0123456 allows calls to be made to all numbers
starting with 0123456.
• Numbers with question marks can be saved. For
example, saving 01234567?0, allows calls to be made
to numbers from 0123456700 to 0123456790. To enter
a question mark, press and hold
To turn fixed dialing on or off
1. Scroll to Phone book, YES , Options, YES, Fixed dialing,
YES.
2. Enter your PIN2, YES .
3. Select On or Off, YES.
To save a fixed number
• Scroll to Phone book, YES, Special numbers, YES, Fixed
numbers, YES . Select Add new? and enter the number.
Calling
This is the Internet version of the user's guide. © Print only for private use.
Closed user groups
The Closed User Group function is a way of lowering
call costs. On some networks it is cheaper to make
calls within a call group. You can save ten groups.
To add a group
1. Scroll to Calls, YES, Manage calls, YES, Closed groups,
YES, Edit list, YES.
2. Scroll to Add new?, YES .
3. Enter the name of the user group, YES.
4. Enter the index number, YES.
You get the index number from your operator.
To activate a group
1. Scroll to Calls, YES, Manage calls, YES, Closed groups,
YES, Edit list, YES.
2. Select a group, YES.
3. Select Activate, YES .
Calls can only be made within the selected group.
To call outside a Closed User Group
• Select Open calls and then select On.
Accept calls
With the accept calls service, you can choose to
receive calls only from certain numbers. Other calls
are automatically rejected by a busy tone. The phone
numbers of calls you have rejected are saved in the
Call List.
To add numbers to the accepted callers list
1. Scroll to Calls, YES, Manage calls, YES , Accept calls,
YES , Accepted list, YES .
2. Scroll to Add to list?, YES .
3. Select an option, YES.
4. Select an entry, YES .
To select an accept option
• Scroll to Calls, YES, Manage calls, YES , Accept calls,
YES , Accept options, YES .
Networks
When you turn on the phone, it automatically
selects your home network if this is within
range. If it is not within range, you may use
another network, provided your network operator has
an agreement that allows you to do so. This is called
roaming.
Calling
This is the Internet version of the user's guide. © Print only for private use.
41
You can select the network you want to use, or you
can add a network to your list of preferred networks.
You can also change the order in which networks are
selected during an automatic search.
To select network settings
1. Scroll to Connect, YES, GSM Networks, YES.
2. Select settings, YES.
Additional calling functions
Tone signals
You can use telephone banking services or
control an answering machine by sending
tone signals (also known as DTMF tones or
touch tones) during a call.
To turn these tone signals off during the call, press
, select Turn off tones, YES . When you end the
call, the number remains in the display. You can then
call the number by pressing YES.
Showing or hiding your number
If your subscription supports Caller ID block,
you can hide your phone number when
making a call.
To show or hide your phone number
1. Enter the phone number you want to call.
2. Press
or scroll to Calls, YES, Next call, YES.
3. Select Hide my number or Show my numb. and press
YES to make the call.
To send and clear tones
• Press the number keys 0-9,
and
• To clear the display after a call, press NO.
Notepad
You can use the phone to make a note of a phone
number during a call. When you press the number
keys, the person you are talking to hears tone signals.
42
Calling
This is the Internet version of the user's guide. © Print only for private use.
Setting up WAP and e-mail
In order to use the Internet, browse via WAP
services or send and receive multimedia and
e-mail messages, the following are required:
1. A phone subscription that supports data
transmission.
2. Settings entered in your phone.
• Settings may already be entered when you buy your
phone.
• You can receive settings in a text message from your
network operator or service provider. Settings are
also available at www.SonyEricsson.com/
• You can enter settings by using the wizard.
• You can enter or edit settings manually.
3. You may also have to register as a WAP/e-mail user
with your service provider or network operator.
See “More settings information” on page 46 for
descriptions.
Receiving settings in a text message
Your GSM network operator or Internet Service
Provider may be able to send the required data
account, WAP and e-mail settings direct to your phone
in a text message.
To request settings from Sony Ericsson
1. Use a PC to go to
http://www.SonyEricsson.com/. Select your region and
then use the Configurators to request that a text
message be sent to your phone with the settings you
need.
2. When the message arrives, New settings received.
Install? appears.
• Press YES to install the new settings
Note: If settings already exist in your phone you can
either keep or replace them. See “Entering or editing
settings manually” on page 44.
• Press NO to cancel installation. A new request for
settings is then required, as in step 1.
3. After installation, see “Using WAP” on page 62.
Note: Some settings are not necessarily mandatory.
Please consult your network operator or service
provider for more information.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
43
Setting up with the wizard
If your phone is not set up for WAP, you can ask your
network operator or service provider to provide you
with WAP settings information. Then you can simply
use the wizard in your phone to help guide you through
the relevant settings.
Note: The wizard is automatically turned on if no WAP
settings exist in your phone and you start the browser.
To set up with the wizard
1. Scroll to WAP Services, YES, homepage (for example
Sony Ericsson), YES. The wizard now starts if no WAP
settings exist.
2. Press YES to create a new WAP profile.
3. Enter a name for the profile, YES.
4. Select Connect using:, YES .
5. Select Add account?, YES .
6. Select an account type, YES.
• If you select GPRS data, YES enter the following:
• A name for the data account, YES .
• APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
44
• User id – your user ID to log on to the external data
network.
• Password – your password to log on to the external
data network.
• Select Save?, YES to save the new data account.
• Select the new data account to be used, YES.
• Select IP address: and enter the number, YES.
• Select Save?, YES to save the new profile.
• If you select GSM data, enter the following:
• A name for the data account, YES.
• Phone number – the phone number of your Internet
Service Provider.
• User id – your user ID to log on to the external data
network.
• Password – your password to log on to the external
data network.
• Select Save?, YES to save the new data account.
• Select the new data account to be used, YES.
• Select IP address: and enter the number, YES.
• Select Save?, YES to save the new profile.
Entering or editing settings manually
You can manually enter or edit settings information
from your network operator or service provider.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
To create or edit settings manually
1. Scroll to WAP Services, YES, Options, YES , WAP
profiles, YES,
2. Select Add profile? or edit an existing profile, YES.
If no settings exist, you must enter data account
(connection settings) as well as WAP profile settings.
• Enter a name for the profile, YES.
• Select Connect using:, YES, Add account?, YES.
• See step 6 in “To set up with the wizard” on
page 44.
3. Enter or edit settings until all required information is
entered, YES .
4. Scroll to Save?, YES.
When selecting an existing profile, you can do the
following:
• Rename – Change the name of the profile.
• Connect using – Select data account.
• IP address – WAP gateway server address.
• Advanced – More profile settings. See below.
• Delete – Remove the profile.
• Second account – Select an alternative data account,
if the first in Connect using fails.
• User id – Enter your user ID for the WAP gateway.
• Password – Enter your password for the WAP
gateway.
• Security – See WAP security.
• Show pictures – View pictures while browsing.
Data account
You may want only to create or edit an existing data
account.
To create a data account manually
1. Scroll to Connect, YES, Data comm., YES , Data
accounts, YES, Add account?, YES .
2. Select an account type for access.
3. Enter a name for the data account.
4. Enter the settings that you have received from your
network operator or service provider.
Confirm each setting by pressing YES.
5. Scroll to Save?, YES .
If you select Advanced you can also do the following:
• Chg homepage – Enter the address of the WAP site
you want as your homepage.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
45
To edit a data account
1. Scroll to Connect, YES, Data comm., YES , Data
accounts, YES .
2. Select a data account, YES.
3. Select Edit.
4. Select the setting you want to edit, YES. Edit the
setting, YES .
5. Repeat step 4 for other settings you want to edit.
More settings information
To use the WAP browser, via a WAP Service Provider,
you need settings for:
• a specific data account for WAP, and a WAP profile.
To use e-mail messaging, via an Internet service
provider, you need settings for:
• a specific data account for e-mail, and an e-mail
account.
To send a text message to an e-mail address via your
network operator, you need to set:
• an e-mail gateway phone number.
46
Descriptions
A data account includes connection settings for
access to an Internet server at your service provider.
A WAP profile includes user settings that allow
browsing and multimedia messaging.
An e-mail account includes user settings that allow
e-mail messaging direct from your phone, such as
those provided by your Internet Service Provider.
Alternatively, E-mail via WAP includes user settings
that also allow e-mail messaging, such as those
provided by your Internet service provider. However
this is set up on your service provider’s WAP site.
Note: Verify with your WAP Service Provider whether
their site supports e-mail.
WAP profile
The WAP settings are stored in a WAP profile. In most
cases, you only need to use one profile to access the
Internet.
You can set up and use additional WAP profiles, for
example, when accessing secure Internet sites, such as
a banking site or a corporate intranet. You then simply
switch between profiles when you need to change the
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
network connection. See “To set up with the wizard”
on page 44 for more information.
Data account
You can have several data accounts saved in
your phone, with different settings for
different purposes. The main setting for a data
account is the Account type (connection method).
Data account settings can either be created with the
wizard, see “Setting up with the wizard” on page 44, or
manually, see “Entering or editing settings manually”
on page 44.
You can choose from GPRS data or GSM data account
types.
Note: Please contact your network operator for
charging details.
GPRS (General Packet Radio Service) allows
access where you can always be online.
Note: You need a subscription that supports
GPRS.
GPRS settings that are available:
• APN (Access point name address) – the address of
the external data network you want to connect to,
either an IP address or a text string.
• User id – your user ID to log on to the external data
network.
• Password – your password to log on to the external
data network.
• Passwd. request (Password request) – if this setting
is on, you are asked for a password each time you
log on to the external data network.
• Allow calls (Preferred service) – if you want to be
able to accept incoming calls during a GPRS
session, select Automatic. If not, select GPRS only.
• IP address – the IP address that the phone uses
when communicating with the network. If you do
not enter an address, the network provides you with
a temporary IP address.
• DNS address – if the network does not provide the
IP address to the DNS server automatically, you
may enter it here.
• Advan. settings (Advanced settings) – these are
optional. Consult your network operator.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
47
GSM settings include some settings that are
similar to GPRS settings and some that are
GSM specific as follows:
• Phone number – the phone number of your
Internet service provider.
• Data rate – select the speed you want for the
connection.
• Dial type – select analog or ISDN connection.
Note: If you want to change access type, you have to
create a new data account and select the access type
you want to use.
Preferred service
You can set GPRS or GSM as the preferred service.
To select preferred mode
• Scroll to Connect, YES , Data comm., YES, Pref. service
and select GPRS and GSM or GSM only, YES.
WAP security
Your phone has support for WAP secure
browsing. When you turn on security, the
connection between your phone and the WAP
gateway is secure.
48
Note: Security for a connection between a WAP
gateway and a WAP Service Provider is the
responsibility of the WAP Service Provider.
To turn on a secure connection
1. Scroll to WAP Services, YES, Options, YES, WAP
profiles, YES.
2. Select the profile to be used, YES.
3. Select Advanced, YES, Security, YES.
4. Select On, YES.
Security module (Locks)
The security module is located on the SIM card, if your
network operator or service provider supplies such a
service. It can contain both certificates and your
private keys. The security module is protected by a
special access PIN and your phone asks you for it
when establishing a secure connection.
To enter the access PIN (for the security module)
and the signature PIN
• Scroll to WAP Services, YES, Options, YES, Common,
YES, Security, YES , Locks.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
Digital signatures
You can sign a contract with your phone by entering a
digital signature PIN as if signing with a pen on paper.
Digital signature records can be traced back to your
private key through a certificate that is used for signing
a contract.
All transactions, signed contracts, made with your
phone when browsing are stored in your phone.
To check your contracts
• Scroll to WAP Services, YES, Options, YES , Common,
YES, Security, YES, Contracts, YES .
Trusted certificates and Client certificates
To establish a secure connection when using certain
WAP services, for example banking or WAP shopping,
you need certificates in your phone.
The different types of certificates are as follows:
1. Server certificates are used to identify a WAP
gateway to the phone and to show that it is certified by
a trusted authority. The server certificate is checked
against trusted certificates that are stored in the phone
or in a security module. If the phone cannot verify the
identity of a server, you are given the options to
terminate or continue the connection.
2. Trusted certificates are used to verify the WAP
gateway that you are trying to connect to. Your phone
may already contain trusted certificates when you buy
it. If you have a security module, it may also contain
trusted certificates. You can also download trusted
certificates from Sony Ericsson Mobile Internet or
other WAP pages.
3. Client certificates are located in a security module
together with your private keys. Client certificates can
be used to present your identity to a bank or other
services. They can also be used for digital signatures.
To check the certificates in your phone
1. Scroll to WAP Services, YES, Options, YES, Common,
YES , Security, YES.
2. Select Trusted certif. or Client certif.
E-mail account settings
An e-mail account specifies, for example, the server
that is used for your e-mail messages.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
49
1.
2.
3.
4.
5.
6.
7.
•
50
To create an e-mail account
Scroll to Messages, YES, E-mail, YES, Options, YES.
Select Edit account, YES.
Select Add new?, YES.
Enter a name for the account, for example Home or
Office.
Select Connect using, YES.
A list appears with the data accounts that you have
saved in your phone.
Select the data account you want to use with this
e-mail account, YES.
If no settings exist for e-mail, you must enter data
account (connection settings) as well as e-mail account
settings. See step 6 in “To set up with the wizard” on
page 44.
Enter the rest of the settings in the list, some of which
are optional. To enter the settings, scroll to the setting,
press YES and enter the information. Press YES to
confirm. Repeat this for each required setting. You use
the same e-mail settings in your phone as in your PC
e-mail program. If you do not have an e-mail service,
contact your operator to get all the necessary settings.
Protocol – select POP3 or IMAP4.
• Incoming serv. (Incoming server) – enter the name or
IP address of the service provider for incoming e-mail
messages. For example, mail.server.com or 10.1.1.1.
• Incoming port – if needed, change the number of the
port used by the protocol you are using.
• Mailbox – enter a user name for your e-mail account.
• Password – enter a password for your e-mail account.
Your service provider may alternatively request a
password on connection.
• Outgoing server – enter the name or IP address of the
SMTP server to be able to send e-mail messages.
• Outgoing port – if needed, change the number of the
port used by the SMTP protocol.
• Email address – enter your e-mail address.
• Download – select whether to receive headers and text
or headers only.
• From name – enter your name.
• Signature – select if you want to add your business
card to your e-mail messages.
• Copy outgoing – select On, if you want e-mail
messages sent from your phone also to be sent to an
e-mail address of your choice. This way, your sent
messages are copied and can be saved for future
reference.
Setting up WAP and e-mail
This is the Internet version of the user's guide. © Print only for private use.
• Check interval – Select how often you want the phone
to connect to your e-mail server and check for
incoming e-mail messages.
If you have both an office and a home e-mail account,
you can set one of them as default:
• Select Set account from the Messages/E-mail/Options
menu and select the account.
See “E-mail” on page 59 for information about how to
use e-mail.
Messaging
Your phone supports various messaging
services - text messages, chat messages,
multimedia messages and e-mail. Please
contact your service provider for details on
which services you can use. For more information
about text, see “Entering letters and characters” on
page 14.
Text messages
Text messages are sent via the Short Message Service
(SMS). They can be sent to one person or to a number
of recipients, for example, that you may have saved in
the phone book.
You can add pictures, animations, melodies, and
sound effects to a text message, and format the text,
using the Enhanced Message Service (EMS). You can
also send picture messages.
Note: Text messages with EMS functionality can only
be sent to other compatible phones supporting the
EMS standard.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
51
Before you start
First make sure that the number of your service center
is set. The number is supplied by your service provider
and is usually saved on the SIM card.
To set the service center number
1. Scroll to Messages, YES, Text, YES, Options, YES,
Service centers, YES.
The service center number appears if it is saved on the
SIM card.
2. If there is no number in the list, select Add new?, YES .
3. Enter the number, including the international “+” sign
and country code, YES .
Sending text messages
For information about entering letters, see “Entering
letters and characters” on page 14.
To write and send a text message
1. Scroll to Messages, YES, Text, YES, Write new, YES.
2. Write your message, YES.
3. Enter a recipient or more as follows:
• Enter a recipient’s phone number, YES .
• For more recipients, scroll to Add recipient, YES,
enter the number, YES .
52
• Press
to retrieve a number from the phone book
or other options.
4. Select Send, YES .
Note: If you send a text message to more than one
recipient, you are charged per recipient.
To insert an item in a text message
Scroll to Messages, YES , Text, YES , Write new, YES .
While writing your message press
Select Insert item, YES .
Select Picture, Sound effect, Melody, Animation or
My anim. or Picture msg, YES.
5. Select an item, YES . Then press YES again to confirm.
After inserting an item, press
to select, delete or
replace options.
1.
2.
3.
4.
Note: Options to insert other items such as sounds and
melodies are available only for Sony Ericsson picture
formats, not for picture messages.
E-mail gateway
Your network operator may have a phone number to an
e-mail gateway that allows you to send a text message
to an e-mail address.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To set up an e-mail gateway
1. Scroll to Messages, YES , Text, YES, Options, YES ,
E-mail gateways, YES .
2. If there is no number in the list, select Add new?, YES .
3. Enter the number, including the international “+” sign
and country code, YES .
You can activate, edit or delete e-mail gateways.
Receiving text messages
When you receive a text message, the phone beeps and
the message New messages. Read now? appears in the
display. If you receive a text message from someone
you have saved as a contact in your phone book, the
name of that contact appears in the display along with
the text message.
Text formatting
You can change the style, size and alignment of the
text, and create new paragraphs, in a text message.
To read the text message
Press YES to read the text message, or NO if you want to
read the message later. The message is saved in Inbox
in the Text menu. You may not receive all parts of a
long message at the same time.
To format the text in a text message
1. Scroll to Messages, YES, Text, YES, Write new, YES.
2. Write the text message. Highlight the text you want to
format by sliding the volume key down while scrolling
back with the joystick.
3. Press
4. Select Text format, YES. Then select Text style, Text
size, Alignment or New paragr., YES.
5. Select a text format, YES .
Tip: You can also select text formats before you start
writing the text message.
While reading the text message you can, for example,
start a chat session with the sender or go to a WAP
address found in the text message.
When you have read the text message, press YES to
select one of the following options, for example,
Reply, Forward or Delete the text message. Press NO to
close the text message.
Calling a number in a text message
You can call a phone number that appears in a text
message.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
53
1.
2.
3.
4.
To call a phone number in a text message
Select the phone number.
Press YES when call (phone number) is selected.
When the number is displayed it can be edited.
Press YES to dial the phone number.
Saving incoming text messages
Incoming text messages are saved in the phone
memory.
To save from a text message
When the melody, phone number, WAP address,
picture or animation is highlighted, press YES. Then
select to save the item and press
• A melody is saved in My sounds.
• A phone number is saved in Phone book.
• A WAP address is saved in Bookmarks.
• All pictures are saved in My pictures.
Note: Animations can only be viewed when inserting
an item in a text message. See “To insert an item in a
text message” on page 52.
54
Long messages
A single text message can contain up to 160 characters.
You can send a longer message where two or more
messages are linked together.
Note: You are charged for each message within a
linked message.
To turn long messages off
• Scroll to Messages, YES , Text, YES , Options, YES,
Long messages, YES, select Off, YES .
Templates
If you have one or more messages that you send often,
you can save these as templates. Your service provider
may also have saved some templates in your phone.
To create a template
1. Scroll to Messages, YES , Text, YES , Templates, YES,
Add new?, YES .
2. Write the message, YES .
3. Press YES if you want to send the message now. Press
NO to save the template.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
•
•
•
•
Message options
You can set a default value for message options or you
can choose the settings each time you send a message.
SMS type – The phone supports different types of
messages. Your service provider may offer the facility
of converting a text message into a format (e-mail, for
example) that suits the equipment that is going to
receive the message.
Validity period – If your message cannot be delivered,
for example, if the recipient has turned off the phone,
your service center can save the message to send it
later.
Request reply – Include a reply request if you want the
recipient of your message to reply.
Status request – Check if a message has been
delivered.
To set a message option
1. Scroll to Messages, YES, Text, YES, Options, YES.
2. Select a message option, YES.
3. Select an option or Set on send, YES.
To check the status of a sent message
• Scroll to Messages, YES, Text, YES, Sent items, YES,
select a text message, press
, View status, YES.
Mobile chat
The mobile chat function works in the same way as a
chat on the Internet. You can choose a nickname that
appears in the recipient’s display each time you send a
chat message.
To enter a chat nickname
1. Scroll to Messages, YES, Chat, YES .
2. Select Nickname, YES.
3. Enter your nickname (maximum of 6 characters), YES.
To start a chat session
1. Scroll to Messages, YES, Chat, YES Start new, YES.
2. Enter the recipient’s phone number, or retrieve it from
the phone book by pressing .
3. Write your message, YES.
•
•
•
•
Receiving a chat session invitation
When you receive a chat session invitation, the phone
beeps and Chat Message. Chat now? appears.
To read the chat message, press YES.
Write your chat message reply and press YES.
To suspend a chat session, press NO .
To resume a chat session, scroll to Messages, YES,
Chat, YES , Resume, YES.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
55
• To end a chat session, press and hold NO.
• To reject a chat message, press NO. The rejected chat
message is saved in Inbox in the Messages menu.
• To end an ongoing session and start another one from a
new chat message, press YES.
Area information
Area information is a type of text message that is sent
to all subscribers in a certain network area, for
example, a local traffic report. When you receive an
area information message, the message automatically
appears. You cannot save area messages. Please
consult your service provider for more information
about area information codes.
To turn area information on or off
• Scroll to Messages, YES, Area info, YES, Reception,
YES.
To enter an area information code
• Scroll to Messages, YES, Area info, YES, Message list,
YES, Add new?, YES .
Cell information
The cell information channel is used by some network
operators to send messages to their subscribers within
a certain network area.
To turn on the channel
• Scroll to Messages, YES , Area info, YES ,
Cell information, YES .
Multimedia messages
Multimedia messages can be sent to a mobile phone
and an e-mail account via Multimedia Messaging
Service (MMS). A multimedia message can contain
text, pictures, animations, melodies and sound. You
can also send contacts, event entries and sound
recordings as attachments.
Before you start
Make sure you have the following settings:
• An address to a message server at your service center.
• A specific WAP profile for multimedia messages.
Note: Contact your network operator to automatically
download settings or for more information.
56
Messaging
This is the Internet version of the user's guide. © Print only for private use.
To enter the message server address
• Scroll to Messages, YES, Multimedia, YES, Options,
YES, Message server, YES.
To select or enter WAP settings for Multimedia
messaging
1. Scroll to Messages, YES, Multimedia, YES, Options,
YES, WAP profile, YES.
2. Select from Select or Create new, YES. See step 2 in
“To set up with the wizard” on page 44 for information
about how to create a WAP profile.
To compose and send a new multimedia
message
1. Scroll to Messages, YES, Multimedia, YES, Write new,
YES.
2. Select from the Compose options that appear.
• Add picture – from My pictures.
• Add text – write a message.
• Add sound – from My sounds.
• Add page – insert a new page.
• Page timing – set the duration in seconds.
• Color – set the background color.
• Delete page – remove a page.
• Preview page – view the page in the message.
• Preview – view the message before sending.
3. Enter the information or make the changes you want,
YES . Press YES again to continue.
4.
5.
6.
7.
The Compose icon appears
, press YES to continue.
Go back to step 2 until finished.
Scroll to Send message, YES .
Enter a phone number or press
to retrieve
information from: the phone book, e-mail addresses,
SIM entries or unsaved numbers.
8. Scroll to Send message, YES or select More for
advanced send options.
Advanced send options
You can enter more information to accompany the
message as follows:
• To: – phone number or e-mail address. These can be
selected from the phone book.
• Subject: – write a title, YES.
• Cc: – phone number or e-mail address.
• Bcc: – phone number or e-mail address.
• Priority: – high, normal, low.
• Delivery report: – turn on or off.
• Read report: – turn on or off.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
57
• Attachments: – add your own card, a business card
or a melody from My sounds.
Tip: Highlight a part of the message and press
if
you are not satisfied and want to delete a part while
writing.
You can base your message on one of the pre-defined
templates.
To use a pre-defined template for a multimedia
message
• Scroll to Messages, YES, Multimedia, YES, Templates,
YES.
To edit the message before sending it
• To edit an item, select it and press YES.
• Pictures – Add or replace an existing picture with
one from My pictures.
• Text – Add or edit existing text. To change text size,
select the text and press
. Select Text size, YES.
• Sound – Add or replace an existing sound with an
alternative from My sounds.
• Page – Insert a new page.
58
• Timing – To set how many seconds you want an
item to be displayed, select the item and press
Select Item timing, YES. To set the timing for the
page, select the cursor icon in the message, press
YES and select Page timing, YES .
• Delete page – Remove a page.
• Preview page – View a page before sending.
• Preview – View the message.
Send options
Before sending a multimedia message you can set
different options.
To edit a multimedia option
1. Scroll to Messages, YES , Multimedia, YES, Options,
YES.
2. Select an option to edit, YES .
Receiving multimedia messages
When you receive a multimedia message, the phone
beeps and the message Read now? appears. Press YES
to read the message.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
Note: Messages are limited to a maximum of 19, even
if you select to receive headers only. You may have to
delete old messages before you can receive new ones.
Automatic download options
From the Messages/Multimedia/Options/Auto
download menu select one of the following:
• On – Messages are automatically downloaded to your
phone by default.
• Confirm – Press YES to download or NO to save it on
your network operator’s server.
• Off – A new message icon appears in the inbox. Select
the message and press YES to download.
Note: Check with your network operator regarding
how many messages can be saved or the space
available on the network server.
To view a multimedia message
1. Press YES . The message is automatically played.
2. Press any key to stop.
When you have viewed a multimedia message, you
can use the joystick to scroll through the message
again. When an item is highlighted, press
to save
it in your phone.
When you have read the message, select Proceed to
select one of the following options such as: Reply,
Forward, Save template or Delete the message. Press
NO to close the message.
Tip: You can select a message from the list of
messages and press
to delete the entire message.
E-mail
You can use your phone to send and receive e-mail
messages via the Internet, as you would from a PC.
Before you start
First make sure that you have:
• A subscription that supports data transmission. For
more information, consult your service provider.
• Set up and selected an e-mail account, including data
account (connection settings).
See “E-mail account settings” on page 49 for more
information.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
59
Sending and receiving e-mail messages
The Send & receive option offers the fastest way to
send e-mail messages saved in the Outbox and check
for new e-mail messages.
To write and send an e-mail message
1. Scroll to Messages, YES, E-mail, YES, Write new, YES.
2. Select:
• To: – Then add name, enter an e-mail address, or
retrieve an e-mail address from the phone book. To
retrieve a saved address from the phone book or
received messages in your inbox, press
and
select either Phone book or Archive. When you are
finished adding recipients, press NO to return to
writing an e-mail message.
• Cc: – If you want to send a copy of the message to
someone.
• Priority: – Set the message priority.
• Subject: – Write a title, YES.
• Text: – Write your message, YES.
• Attachments – Add up to five pictures to a message.
3. Select one of the following:
• Send now – The e-mail message is sent.
60
• Send w/attach. – You can attach a picture from
My pictures or from a digital camera connected via
IR. Select a picture and press YES to send.
• Save to outbox – The e-mail message is saved in the
Outbox.
• Save to drafts – The e-mail message is saved in the
Drafts folder
4. Send & receive in the E-mail menu – All e-mail
messages in the Outbox are sent and any new e-mail
messages are received in the Inbox.
To receive and read e-mail messages
1. Scroll to Messages, YES , E-mail, YES , Send & receive,
YES.
2. When the e-mail messages have been downloaded to
the phone, scroll to Messages, YES, E-mail, YES, Inbox,
YES to select and read them.
Note: The phone can save up to six complete e-mail
messages depending on the size. You can use the
setting to download headers only, see “E-mail account
settings” on page 49. All e-mail messages are also
saved on your e-mail server.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
More messages on the server are indicated by:
• Arrows in the top or bottom left corners.
• Numbers in brackets for the previous and following
messages in the list.
Note: If you select a WAP address when reading an
e-mail message, e-mail disconnects and WAP starts.
To retrieve more messages
• Scroll to the arrow and press YES.
To reply to an e-mail message
Open the e-mail message.
Place the cursor in the text and press
Select Reply or Reply all, YES.
Select Write new or Include this msg to include the
message you received, press YES.
5. Write a message, YES.
1.
2.
3.
4.
To save an e-mail address or a phone number
• When the e-mail address or phone number is
highlighted, press YES. Select Save, YES .
Archiving
You can archive an e-mail message in order to read it
later, or if you want to save important information. You
can archive only as much text as the display shows.
To archive an e-mail message
1. Open the e-mail message.
2. Make sure that the text you want to archive is visible in
the display.
3. Place the cursor in the text and press
4. Select Copy to arch., YES . The text can be found in
Archive in the E-mail menu.
To delete an e-mail message
1. Scroll to Messages, YES, E-mail, YES, Inbox, YES.
2. Scroll to the message and press
3. Select Mark f.deletion, YES.
The message is deleted the next time you connect to
your e-mail server by selecting Send & receive.
To delete e-mail messages (IMAP4 users)
1. Scroll to Messages, YES, E-mail, YES, Options, YES.
2. Select Purge inbox, YES .
3. Select whether to delete with Send & receive or not.
Messaging
This is the Internet version of the user's guide. © Print only for private use.
61
Using WAP
Your phone has a WAP (Wireless Application
Protocol) browser and e-mail messaging
which are designed to bring a modified Internet to your
mobile phone. A wide range of services are available,
for example, news, entertainment, timetables,
reservations, banking, e-commerce, positioning and
e-mail.
•
•
•
•
Before you start
First make sure that you have:
A phone subscription that supports data transmission.
Correct settings in your phone for mobile Internet,
WAP and/or e-mail messaging. See “Setting up WAP
and e-mail” on page 43.
Registered as a WAP/E-mail user with your network
operator or service provider.
A WAP profile selected the first time you start
browsing with a new or another WAP profile.
Note: See “E-mail account settings” on page 49 or
“E-mail” on page 59 for more information about
e-mail set-up and messaging.
62
To select a WAP profile
1. Scroll to WAP Services, YES, Select profile, YES.
2. Select the profile you want to use, YES.
You then return to the WAP Services menu and the
WAP profile is selected.
Using the WAP browser
To start browsing
• Scroll to WAP Services, YES, select a service from the
following:
• Open your homepage at the top of the list, for
example, Sony Ericsson.
• Go to one of your bookmarks. Select Bookmarks,
YES .
• Enter the address of a WAP site. Select Enter
address, YES, New address? to enter a new WAP
address or select one of the 10 latest entered
addresses.
Tip: When you enter a WAP address, the normal
http:// prefix is not needed.
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
To exit WAP and disconnect
• Press and hold NO or
• Press
, select Exit WAP.
•
•
•
•
•
•
•
•
Options when browsing
When you have started browsing, you can reach
different browsing options by pressing
The options menu is dynamic. Its content may vary
depending on which WAP site you are visiting.
The options menu always contains the following:
Go to the homepage set for the current WAP profile.
Bookmarks – Add the site you are currently browsing
to your list of bookmarks, or see the list of bookmarks
for the current profile.
Enter address – Enter the WAP address of a site you
want to visit.
Save picture – Save a picture from the site.
Send via SMS – Send a text message with a link to the
current WAP page to another phone.
Send link – Send a link to the current site to another
phone via infrared.
Reload – Refresh the contents of the WAP page.
Exit WAP – Disconnect and go to standby.
• Status – Display current status information, for
example, profile, access type, connection time, data
rate, security, address.
• Set as homepg – Set the current site as the homepage of
the WAP profile you are using.
Note: If you select an e-mail address when browsing a
WAP site, you can reply with a text message.
Using bookmarks
You use bookmarks in your mobile phone just as you
do with a PC Internet browser. You can have up to a
maximum of 25 bookmarks.
To work with bookmarks
1. Scroll to WAP Services, YES, Bookmarks, YES.
2. Select the bookmark you want to work with,
3. Select one of the following options and press YES :
• Go to – Go to the marked WAP address.
• Edit – Edit the title and/or the WAP address of the
bookmark. See “Options when browsing” on
page 63 for more information.
• Delete – Delete the bookmark.
• Send via SMS – Send a link to the WAP address in a
text message.
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
63
• Send – Send a link to the current WAP address via
infrared.
• Set as homepg – Set the WAP address as the
homepage.
Downloading
You can download, for example, pictures,
themes, games and ring signals, from WAP
sites directly to your phone.
To download more content to your phone
1. Scroll to Fun & Games, YES , Download, YES.
2. Select what you want to download and follow the
instructions that appear, YES .
Note: Contact your network operator or service
provider for more information if menu options are not
available.
To download from wap.sonyericsson.com
1. Scroll to WAP Services, YES, Bookmarks, YES,
Sony Ericsson, YES.
2. Select what you want to download and follow the
instructions that appear, YES .
64
Note: Make sure the file sizes do not exceed the free
memory in your phone, see “Memory status” on
page 74 for more information.
WAP push messages
You can receive push messages via WAP Services.
This means that a service provider sends WAP content
(information) to your phone without you having to do
anything. You can, for example, get updated news or
new WAP settings from your service provider.
There are two kinds of push messages:
• Text messages that inform you about WAP services, by
sending a link. To go to the WAP service, click the link
and select Load.
• Information from a WAP service appears in the WAP
browser.
Receiving a push message
You can set your phone to either accept or reject push
messages. The setting is valid for all your WAP
profiles.
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
To set push message acceptance
1. Scroll to WAP Services, YES, Options, YES , Common,
YES, Push access, YES .
2. Select one of the following settings:
• On – You allow push messages to be automatically
loaded.
• Prompt – You allow push messages, but only when
you confirm.
• Off – You do not allow push messages.
To respond to a push message
• Scroll to WAP Services, YES , Push inbox, YES, scroll to
any push message, YES and select one of the following:
• Load – The browser starts and loads the WAP site so
that you can see the push content.
• Delete – Deletes the push message.
• Postpone – Save the message, to be loaded later.
To allow WAP information in your phone
1. Scroll to WAP Services, YES, Options, YES, Common,
YES .
2. Select the information you want to allow, YES.
3. Select On, YES.
Note: See “WAP security” on page 48 for more
information regarding security and certificates.
It is advisable to clear any sensitive information about
previously visited WAP services. This is to avoid a
security risk if your phone is misplaced, lost or stolen.
To clear cache, push inbox, password list or
cookies
1. Scroll to WAP Services, YES, Advanced, YES .
2. Select the information to be cleared.
3. Press YES to confirm.
Stored information
The following information can be saved in your phone:
• Cache – improves memory efficiency.
• Cookies – improve site access efficiency.
• Passwords – improve server access efficiency.
Using WAP
This is the Internet version of the user's guide. © Print only for private use.
65
More features
Data calls
Data calls
To make data calls you need to connect your
phone to a computer, and then start the appropriate
software program.
Receive data calls
The procedure of receiving data calls depends on your
network and subscription. If you have separate numbers
for voice and data calls, your phone will recognize the
type of call.
To receive a data call (separate numbers)
1. Connect your phone to a computer via IR or an RS232
accessory cable.
2. Answer the call from within the software program
(if it does not answer automatically).
You cannot answer a data call by pressing the YES key
on the phone.
66
One number
If you have a SIM card that does not support a separate
data number, the phone does not recognize the type of
incoming call.
If you want to receive a data call, you have to set the
phone to this option. Once you have set your phone for
a specific incoming call, it stays like this until you
change it.
To select the next incoming call type
• Scroll to Calls, YES, Next call, YES, Next incoming,
YES.
Alarm clock
The alarm can be set to ring at a specific time within
24 hours, or recurrently at a specific time on several
days. You can have both these alarms set at the same
time. Even if you have set your phone to silent, the
alarm and timer signals ring. The alarm clock also
rings if the phone is turned off.
More features
This is the Internet version of the user's guide. © Print only for private use.
To set an alarm
1. Scroll to Organizer, YES, Alarms, YES , Alarm or
Recurrent alarm, YES .
2. Enter the time, YES and day, if recurrent, by scrolling
, YES.
and pressing
• To change the alarm time, scroll to Organizer, YES,
Alarms, YES, Alarm, YES, New time, YES.
• Press any key to turn the alarm signal off when it rings.
If you do not want the alarm to be repeated, press YES.
• To cancel the alarm, scroll to Organizer, YES, Alarms,
YES, Alarm or Recurrent alarm, YES, Cancel, YES.
• To select an alarm signal, scroll to Settings, YES ,
Sounds & alerts, YES, Alarm signal, YES.
•
•
•
•
•
Stopwatch
Scroll to Organizer, YES, Stopwatch, YES.
To start, stop or restart, press YES .
To stop, press YES or NO.
To reset (when stopped), press
or NO.
To save up to nine lap times, press
To check saved lap times, scroll using the joystick.
Note: The stopwatch is turned off when you answer an
incoming call or when you exit the stopwatch menu.
Timer
The phone has a built-in 24-hour timer.
To set the timer
• Scroll to Organizer, YES, Timer, YES. When the signal
rings, press any key to turn it off.
Calculator
The phone has a built-in calculator, which can add,
subtract, divide and multiply.
To use the calculator
• Scroll to Organizer, YES, Calculator, YES.
You can enter digits with the keypad and the following:
• Press
to get +, -, x, /.
• Press
to delete the figure.
• Press
to enter a decimal point or %.
• Press YES to calculate a result, equals to (=).
• Press
to save to memory.
• Press to retrieve from memory.
Note: The accuracy of the calculator function is
limited.
More features
This is the Internet version of the user's guide. © Print only for private use.
67
Events
Keep track of important things that you need to do.
You can choose to add, reschedule, edit, send or delete
events.
To add a new event
1. Scroll to Organizer, YES , Events, YES, New?, YES.
2. Enter the appropriate information: date, time, subject,
icon, reminder.
Confirm each entry with YES.
To view or edit your events
• Scroll to Organizer, YES, Events, YES and then select an
event, YES.
Events options
• Scroll to an event, press
and then select one of
the options to reschedule, edit, send, delete or
delete all.
Exchanging events
You can send and receive an event via IR or a
multimedia message.
68
To send an event
1. Scroll to the item you want to send and press
2. Scroll to Send, YES.
3. Select a transfer method.
To receive an event
1. From standby, press
, scroll to Activate IR, YES or
see “To view a multimedia message” on page 59.
2. Press YES to save.
Note: If the events list is full, you must remove events
before you can save any new ones.
Sound recorder
With the Sound recorder function, you can record
either your own memos or calls. All participants in the
call are automatically recorded. The recording is
terminated if any party hangs up.
The recordings are saved in your mobile phone and
can be accessed even if you change your SIM card.
Note: In some countries or states it is required by
law that you inform the other person before recording
the call.
More features
This is the Internet version of the user's guide. © Print only for private use.
To start a sound recording
• Scroll to Fun & Games, YES , Sound recorder, YES .
Recording starts and the display shows Recording
together with the time of the current recording
(increasing).
Note: Recordings are saved in Fun & Games/
My sounds.
To end the recording
• Press NO.
The recording stops automatically if you receive an
incoming call or when the call ends. You hear a tone a
few seconds before the memory is full.
Listening to recordings
You can listen to your recordings at any time, even
during a call, and both persons will hear them.
To listen to your recordings
1. Scroll to Fun & Games, YES , My sounds, YES.
2. Scroll to Recording or go to next or previous by
moving the joystick up or down, YES.
3. Select Play, YES.
4. Press YES to stop playback and return to options or
press NO to stop playback and return to My sounds.
Note: You can also send, delete, rename, check sound
information and memory status by selecting a
recording or sound and pressing YES or
To send a recording
1. Scroll to Fun & Games, YES, My sounds, YES.
2. Scroll to the recording you wish to send.
3. Press
, select Send and then the transfer method.
1.
2.
3.
4.
To erase or rename a sound recording
Scroll to Fun & Games, YES, My sounds, YES.
Scroll to the recording you wish to erase or rename.
Press
when the recording is highlighted.
Select Delete or Rename, YES.
Games
Your phone has games and you can download games.
Game controls are specified with help for each game.
To manage games
1. Scroll to Fun & Games, YES, Games, YES .
2. Select a game,
3. Select an option, YES.
More features
This is the Internet version of the user's guide. © Print only for private use.
69
Note: Select Help for game control information.
1.
2.
3.
4.
To start a game
Scroll to Fun & Games, YES , Games, YES.
Select a game, YES.
Select New game or Resume game, YES .
Start the game.
To download a new game
1. Make sure you have entered WAP settings,
see “Setting up WAP and e-mail” on page 43.
2. Scroll to Fun & Games, YES , Games, YES,
New games, YES.
3. Press YES to download a new game via WAP.
A WAP session starts.
4. Select a game from the WAP site, YES . The game is
downloaded and saved in Fun & Games/Games.
Note: Contact your network operator or service
provider for more information if menu options are not
available. See “To download from
wap.sonyericsson.com” on page 64 for more
information.
70
Security
SIM card lock
The SIM card lock protects your subscription, but not
your phone itself, from unauthorized use. If you
change SIM cards, the phone still works with the new
SIM card.
Most SIM cards are locked at the time of purchase.
If the SIM card lock is on, you have to enter a “PIN”
(Personal Identity Number) every time you turn on
your phone.
As you enter your PIN, the digits are hidden with an
*. However digits are shown if your PIN starts with the
same digits as an emergency number, for example 112.
This is so that you can see and call an emergency
number without entering a PIN. See “Emergency calls”
on page 28 for more information.
If you enter your PIN incorrectly three times in a
row, the SIM card is blocked. This is indicated by the
message PIN blocked. To unblock it you need to enter
your “PUK” (Personal Unblocking Key). Your PIN
and PUK are supplied by your operator.
Security
This is the Internet version of the user's guide. © Print only for private use.
1.
2.
3.
4.
To unblock your SIM card
PIN blocked appears.
Enter your PUK and press YES .
Enter a new four- to eight-digit PIN and press YES.
Re-enter the new PIN to confirm and press YES .
To edit your PIN
• Scroll to Settings, YES, Locks, YES, SIM lock, YES,
Change PIN, YES.
Note: If the message “Codes do not match” appears,
you entered the new PIN incorrectly. If the message
“Wrong PIN” appears, followed by “Old PIN:”, you
entered your old PIN incorrectly.
PIN2
Certain services are protected by a second PIN.
To edit your PIN2
• Scroll to Settings, YES, Locks, YES, SIM lock, YES,
Change PIN2, YES.
To turn the SIM card lock on or off
1. Scroll to Settings, YES, Locks, YES, SIM lock,
YES, Protection, YES.
2. Select On or Off, and press YES.
3. Enter your PIN and press YES.
Phone lock
The phone lock protects the phone against
unauthorized use if it is stolen and the SIM card is
exchanged. It is not on when you buy the phone. You
can change the phone lock code (0000) to any four- to
eight-digit personal code. The phone lock can be set to
on, automatic or off.
Note: The phone lock code must be entered to use
Master reset. See “Master reset” on page 26 for more
information.
Phone lock on
If the phone lock is on, the message Phone locked
appears each time you turn on the phone. You have to
enter your code followed by YES to use your phone.
Automatic
If the phone lock is set to automatic, you do not need to
enter your phone lock code until a different SIM card
is inserted in the phone.
Security
This is the Internet version of the user's guide. © Print only for private use.
71
To edit your phone lock code
• Scroll to Settings, YES, Locks, YES, Phone lock, YES ,
Change code, YES .
Note: It is important that you remember your new
code. If you should forget it, you will have to bring the
phone in to your local Sony Ericsson retailer.
To set the phone lock
1. Scroll to Settings, YES, Locks, YES, Phone lock, YES ,
Protection, YES.
2. Select an alternative and press YES.
3. Enter the phone lock code and press YES.
Troubleshooting
This chapter lists some problems that you might
encounter while using your phone. Some problems
require that you call your service provider, but most of
the problems you can easily correct yourself.
The phone cannot be switched on
Recharge or replace the battery. See “SIM card and
battery information” on page 6.
No indication of charging
When you start charging a battery that is empty or a
battery that has not been used for a long time, it may
take up to 30 minutes before the battery icon appears in
the display.
Menu language
If the display shows a language that you do not
understand, you can always set the following from
standby:
• Press
0000
for English menus.
• Press
8888
for automatic, local menus.
Note: Themes are also set to factory default.
72
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
Grey menu options
Grey text indicates a function that is
temporarily unavailable, for example, due to
your subscription or due to a certain setting
which has not been turned on.
Since you cannot send themes, pictures and sounds
that are copyright-protected, the Send menu is
sometimes unavailable.
Error messages
Insert SIM
There is no SIM card in the phone, it may need
cleaning or you may have inserted it incorrectly. See
“SIM card and battery information” on page 6.
Insert correct SIM card
The phone is set to work only with certain SIM cards.
Insert the correct SIM card.
Inactive SIM
The SIM card is not activate. Contact your network
operator for more information.
Emergency only
You are within range of a network, but you are not
allowed to use it. However, in an emergency, some
operators allow you to call the international emergency
number 112. See “Emergency calls” on page 28.
No network
There is no network within range or the received signal
is too weak. You have to move to get a signal that is
strong enough.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2 incorrectly.
• Enter the correct PIN or PIN2, and press YES. See
“SIM card lock” on page 70.
Codes do not match
When you want to change a security code (for example
your PIN) you have to confirm the new code by
entering it again. The two codes that you have entered
do not match. See “SIM card lock” on page 70.
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
73
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2 incorrectly three
times in a row. To unblock, see “SIM card lock” on
page 70.
Charging, alien battery
The battery you are using is not a Sony Ericssonapproved battery and is charging slowly for safety
reasons.
PUK blocked- contact operator
You entered your personal unblocking key code (PUK)
incorrectly 10 times in a row. Contact your network
operator or service provider.
Cannot connect to server
If your settings have previously worked, try again later
as the network server may be temporarily busy or
experiencing problems.
Phone locked
The phone is locked. To unlock the phone, see “Phone
lock” on page 71.
Memory status
Check, for example, how many positions are left in
your phone book or how much memory is used.
Phone lock code:
Your phone comes with the phone lock code, 0000.
You can change it to any four- to eight-digit code. See
“Phone lock” on page 71.
To check the memory of the phone book
• Scroll to Phone book, YES, Advanced, YES, Memory
status, YES .
Number not permitted
The Fixed Dialing function is on and the number you
have dialed is not on your fixed numbers list. See
“Fixed dialing” on page 40.
74
To check the memory for themes, pictures,
sounds, games (and multimedia messages)
• Scroll to Fun & Games, YES, select one of the menus,
YES,
, select Memory status, YES .
Troubleshooting
This is the Internet version of the user's guide. © Print only for private use.
To check memory for text/multimedia messages
• Scroll to Messages, YES, select one of the menus, YES,
Memory status, YES.
Memory full
Free memory by deleting unused files or information.
To delete saved files or information
• Select a file or information, press
, YES.
• Select a submenu option or advanced option to delete.
Note: Some factory default files and information
cannot be deleted.
Additional information
Sony Ericsson Consumer web site
On www.SonyEricsson.com/ there is a support section
where help and tips are only a few clicks away. Here
you find the latest software updates, tips on how to use
your product more efficiently, function guides for
some of the products and additional help when you
require it.
Carrying strap
You can attach a carrying strap to your phone.
To attach a carrying strap to your phone
1. Feed the thin end of the strap through the loophole at
the top of your phone.
2. Feed the thick end of the strap through the thin end of
the strap.
3. Pull the thick end of the strap to tighten it.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
75
Guidelines for Safe and Efficient Use
Please read this information before using
your mobile phone.
RECOMMENDATIONS
• Always treat your product with care and keep it in a clean
and dust-free place.
• Do not expose your product to liquid or moisture or
humidity.
• Do not expose your product to extreme high
or low temperatures.
• Do not expose your product to open flames
or lit tobacco products.
• Do not drop, throw or try to bend your
product.
• Do not paint your product.
• Do not use your product near medical equipment without
requesting permission.
76
Additional information
This is the Internet version of the user's guide. © Print only for private use.
• Do not use your product when in, or around aircraft, or
areas posted “turn off two-way radio”.
of performance and SAR levels above the recommended
limits (see below).
• Do not use your product in an area where a
potentially explosive atmosphere exists.
EFFICIENT USE
• Do not place your product or install wireless
equipment in the area above your car’s air
bag.
• Do not attempt to disassemble your
product. Only Sony Ericsson authorized
personnel should perform service.
• Do not direct the infrared ray at anyone's
eye and make sure that it does not disturb any other
infrared units.
• To avoid hearing impairment, accept the call before
holding your product (or portable handsfree device) to
your ear.
ANTENNA
Only use an antenna that has been specifically designed
by Sony Ericsson for your mobile phone. Use of
unauthorised or modified antennas could damage your
mobile phone and may violate regulations, causing loss
Hold your mobile phone as you would any other phone.
Do not cover the top of the phone when in use, as this
affects call quality and may cause the phone to operate
at a higher power level than needed, thus shortening talk
and standby times.
RADIO FREQUENCY (RF) EXPOSURE
AND SAR
Your mobile phone is a low-power radio transmitter
and receiver. When it is turned on, it emits low levels of
radio frequency energy (also known as radio waves or
radio frequency fields).
Governments around the world have adopted
comprehensive international safety guidelines,
developed by scientific organizations, e.g. ICNIRP
(International Commission on Non-Ionizing Radiation
Protection) and IEEE (The Institute of Electrical and
Electronics Engineers Inc.), through periodic and
thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave
exposure for the general population. The levels include a
safety margin designed to assure the safety of all
persons, regardless of age and health, and to account for
any variations in measurements.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
77
Specific Absorption Rate (SAR) is the unit of
measurement for the amount of radio frequency energy
absorbed by the body when using a mobile phone. The
SAR value is determined at the highest certified power
level in laboratory conditions, but the actual SAR level of
the mobile phone while operating can be well below this
value. This is because the mobile phone is designed to
use the minimum power required to reach the network.
Therefore, the closer you are to a base station, the more
likely it is that the actual SAR level will decrease.
Variations in SAR below the radio frequency exposure
guidelines do not mean that there are variations in safety.
While there may be differences in SAR levels among
mobile phones, all Sony Ericsson mobile phone models
are designed to meet radio frequency exposure
guidelines.
Accessories can significantly affect a mobile phone's
compliance with the radio frequency exposure
guidelines. For example, the Federal Communication
Commission in the U.S. requires that some
manufacturers' accessories shall be tested, and Sony
Ericsson has done so with respect to its products. To
avoid causing loss of performance or radio frequency
exposure levels above the permissible limits it is
recommended that you only use Sony Ericsson or
Ericsson original accessories intended for use with the
mobile phone. If you wear the mobile phone on your
body while it is transmitting, and you do not use a Sony
Ericsson or Ericsson original body worn accessory,
78
please ensure that the mobile phone is positioned a
minimum of 1.5 cm from your body and that you are not
using an accessory that contain any metal.
A separate leaflet with SAR information for this mobile
phone model is included with the material that comes
with this mobile phone. This information can also be
found, together with more information on radio frequency
exposure and SAR, on: www.sonyericsson.com.
DRIVING
Please check if local laws and regulations restrict the use
of mobile phones while driving or require drivers to use
handsfree solutions. We recommend that you use only
Ericsson or Sony Ericsson handsfree solutions intended
for use with your product. Please note that because of
possible interference to electronic equipment, some
vehicle manufacturers forbid the use of mobile phones in
their vehicles unless a handsfree kit with an external
antenna supports the installation.
Always give full attention to driving and pull off the
road and park before making or answering a call if driving
conditions so require.
PERSONAL MEDICAL DEVICES
Mobile phones may affect the operation of cardiac
pacemakers and other implanted equipment. Please
avoid placing the mobile phone over the pacemaker, e.g.
in your breast pocket. When using the mobile phone,
place it at the ear opposite the pacemaker. If a minimum
Additional information
This is the Internet version of the user's guide. © Print only for private use.
distance of 15 cm (6 inches) is kept between the mobile
phone and the pacemaker, the risk of interference is
limited. If you have any reason to suspect that
interference is taking place, immediately turn off your
mobile phone. Contact your cardiologist for more
information.
For other medical devices, please consult the
manufacturer of the device.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY
WITH YOUR MOBILE PHONE OR ITS
ACCESSORIES. THEY COULD HURT
THEMSELVES OR OTHERS, OR COULD
ACCIDENTALLY DAMAGE THE MOBILE PHONE OR
ACCESSORY. YOUR MOBILE PHONE OR ITS
ACCESSORY MAY CONTAIN SMALL PARTS THAT
COULD BE DETACHED AND CREATE A CHOKING
HAZARD.
DISPOSING OF THE PRODUCT
Your mobile phone should not be placed in
municipal waste. Please check local
regulations for disposal of electronic
products.
POWER SUPPLY
Connect the AC power adapter only to designated power
sources as marked on the product. Make sure the cord is
positioned so that it will not be subjected to damage or
stress. To reduce risk of electric shock, unplug the unit
from any power source before attempting to clean it. The
AC power adapter must not be used outdoors or in damp
areas. Never alter the cord or plug. If the plug will not fit
into the outlet, have a proper outlet installed by a
qualified electrician.
EMERGENCY CALLS
Mobile phones operate using radio signals, which cannot
guarantee connection under all conditions. Therefore you
should never rely solely upon any mobile phone for
essential communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular
networks or when certain network services and/or mobile
phone features are in use. Check with your local service
provider.
Emergency Response Center Location Technology
Using wireless technology to help find you in case of an
emergency is a goal shared by the entire wireless
industry, local phone companies and the emergency
response centers. Your phone may support an
emergency positioning system being implemented by
some service providers. But the complexity of mobile
communication technology, combined with related
implementation technologies, means that your wireless
carrier, the local phone companies, and emergency
Additional information
This is the Internet version of the user's guide. © Print only for private use.
79
response centers all have a role to play in implementing
this capability.
So even if your phone supports this technology and
even if the locating features works in one area there is no
guarantee that it will work in all areas for all calls to
emergency response centers. Always review with an
emergency response center all location data you have,
including intersecting streets, as well as any landmarks,
to assist in locating you.
Sony Ericsson is committed to continuing to work with
the entire communications industry to improve location
features for emergency response.
Sony Ericsson is not liable for any service(s)
including operation, coverage, or range of the network
services provided by network carriers independent of
Sony Ericsson.
BATTERY USE AND CARE
We recommend that you fully charge the battery before
you use your mobile phone for the first time. The battery
can only be charged in temperatures between +5°C
(+41°F) and +45°C (+113°F).
A new battery or one that has not been used for a long
time could have reduced capacity the first few times it is
used.
The talk and standby times depend on the actual
transmission conditions when using the mobile phone. If
the mobile phone is used near a base station, less power
is required and talk and standby times are prolonged.
80
• Warning! May explode if disposed of in fire.
• Use only Ericsson or Sony Ericsson branded original
batteries and chargers intended for use with your mobile
phone. Other chargers may not charge sufficiently or
may produce excessive heat. Using other batteries and
chargers could be dangerous.
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery touch another
metal object. This could short-circuit and damage the
battery.
• Do not disassemble or modify the battery.
• Do not expose the battery to extreme
temperatures, never above +60°C (+140°F).
For maximum battery capacity, use the
battery at room temperature.
• Turn off your mobile phone before removing the battery.
• Keep out of children’s reach.
• Use the battery for the intended purpose
only.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
• Do not allow the battery to be put into the mouth. Battery
electrolytes may be toxic if swallowed.
DISPOSING OF THE BATTERY
Please check local regulations for disposal
of batteries or call your local Sony Ericsson
Customer Care Center for information.
The battery should never be placed in
municipal waste. Use a battery disposal
facility if available.
Limited Warranty
Sony Ericsson Mobile Communications AB, S-221 88
Lund, Sweden, (Sony Ericsson), provides this Limited
Warranty for your mobile phone and original accessory
delivered with your mobile phone (hereinafter referred to
as “Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased, or
contact your local Sony Ericsson Customer Care Centre
(national rates may apply) or visit
www.SonyEricsson.com to get further information.
OUR WARRANTY
Subject to the conditions of this Limited Warranty, Sony
Ericsson warrants this Product to be free from defects in
design, material and workmanship at the time of its
original purchase by a consumer, and for a subsequent
period of one (1) year.
WHAT WE WILL DO
If, during the warranty period, this Product fails to
operate under normal use and service, due to defects in
design, materials or workmanship, Sony Ericsson
authorized distributors or service partners, in the country/
region* where you purchased the Product, will, at their
option, either repair or replace the Product in accordance
with the terms and conditions stipulated herein.
Sony Ericsson and its service partners reserve the
right to charge a handling fee if a returned Product is
found not to be under warranty according to the
conditions below.
Please note that your personal settings/downloads
might be lost when the Product is repaired or replaced.
CONDITIONS
1. The warranty is valid only if the original proof of purchase
issued to the original purchaser by an, for this Product,
Sony Ericsson authorized dealer, specifying the date of
purchase and serial number**, is presented with the
Product to be repaired or replaced. Sony Ericsson
reserves the right to refuse warranty service if this
information has been removed or changed after the
original purchase of the Product from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for the
remaining time of the original warranty period or for
ninety (90) days from the date of repair, whichever is
Additional information
This is the Internet version of the user's guide. © Print only for private use.
81
longer. Repair or replacement may involve the use of
functionally equivalent reconditioned units. Replaced
parts or components will become the property of Sony
Ericsson.
3. This warranty does not cover any failure of the Product
due to normal wear and tear, or due to misuse, including
but not limited to use in other than the normal and
customary manner, in accordance with the Sony
Ericsson instructions for use and maintenance of the
Product. Nor does this warranty cover any failure of the
Product due to accident, software or hardware
modification or adjustment, acts of God or damage
resulting from liquid.
4. Since the cellular system on which the Product is to
operate is provided by a carrier independent from Sony
Ericsson, Sony Ericsson will not be responsible for the
operation, availability, coverage, services or range of that
system.
5. This warranty does not cover Product failures caused by
installations, modifications, or repair or opening of the
Product performed by a non-Sony Ericsson authorized
person.
6. The warranty does not cover Product failures which have
been caused by use of accessories or other peripheral
devices which are not Ericsson or Sony Ericsson
82
branded original accessories intended for use with the
Product.
7. Tampering with any of the seals on the Product will void
the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER
WRITTEN OR ORAL, OTHER THAN THIS PRINTED
LIMITED WARRANTY. ALL IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO
THE DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONY ERICSSON OR ITS LICENSORS
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS OR
COMMERCIAL LOSS, TO THE FULL EXTENT THOSE
DAMAGES CAN BE DISCLAIMED BY LAW.
Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, or
limitation of the duration of implied warranties, so the
preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer's
statutory rights under applicable legislation in force, nor
the consumer's rights against the dealer arising from
their sales/purchase contract.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
* EUROPEAN UNION (EU)
If you have purchased your Product in an EU country you
can have your Product serviced, under the conditions set
out above, within the warranty period in any EU country
where an identical Product is sold by an authorized Sony
Ericsson distributor. To find out if your Product is sold in
the EU country you are in, please call the local Sony
Ericsson Customer Care Centre. Please observe that
certain services may not be possible elsewhere than in
the country of original purchase, for example, due to the
fact that your Product may have an interior or exterior
which is different from equivalent models sold in other
EU countries. It may not be possible to repair SIM-locked
Products.
** In some countries/regions additional information is
requested. If so, this is clearly shown on the valid proof of
purchase.
FCC Statement
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are
performed in positions and locations (that is, at the ear
and worn on the body) as required by the FCC for each
model. Body worn measurements are made while the
phone is in use and worn on the body with, if available,
an Ericsson or Sony Ericsson branded original accessory
intended for use with the phone. The design and
composition of an accessory can affect the body worn
SAR (Specific Absorption Rate) levels for the phone.
Sony Ericsson has not measured, and makes no
representation about, the body worn SAR levels when
the phone is used with non-Ericsson or non-Sony
Ericsson branded original accessories intended for use
with the phone.
For Canadian Customers
The term "IC:" before the radio certification number only
signifies that industry Canada technical specifications
were met.
Additional information
This is the Internet version of the user's guide. © Print only for private use.
83
Declaration of Conformity
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden.
declare under our sole responsibility that our product
Sony Ericsson type 113 0602-BV
and in combination with our accessories, to which this
declaration relates is in conformity with the appropriate
standards 3GPP TS 51.010-1, EN 301489-7, EN 60950,
following the provisions of, Radio Equipment and
Telecommunication Terminal Equipment directive
99/5/EC with requirements covering EMC directive
89/336/EEC, and Low Voltage directive 73/23/EEC.
Lund, December 2002
Place & date of issue
0682
Kentaro Odaka, Head of Product Business Unit GSM/UMTS
We fulfill the requirements of the R&TTE Directive
(99/5/EC).
84
Additional information
This is the Internet version of the user's guide. © Print only for private use.
Icons
Icon
Description
Create your own menu for the functions you
use most often.
The table below shows icons which may appear in
standby or in the menus.
Standby
Icon
Description
Main menus
Your personal phone book.
Handling of text (SMS), multimedia (MMS),
e-mail and voice messages.
Handling of outgoing/incoming calls, call time
and cost information.
Handling of ongoing calls. Alternates with the
Calls menu, i.e. only available during calls.
Handling of pictures, sounds and themes. Play
games.
Personal settings including profiles, display,
language, time and locks.
Gives you access to WAP services on the
Internet.
Events, alarm clock and other extras.
Receive items via infrared, networks, data
communications settings and accessories.
Tells you the strength of the GSM network
signal.
GPRS is within range.
GPRS is within range and can be used.
Tells you the status of the battery.
You cannot receive any incoming calls.
You have missed an incoming call.
All incoming calls are forwarded to a defined
number.
No calls or only certain calls from numbers in
a list are received.
All signals are off, except the alarm and timer.
The alarm clock has been set and is on.
Icons
This is the Internet version of the user's guide. © Print only for private use.
85
Icon
Description
Description
The timer has been set and is on.
Line 2 is in use for outgoing calls.
A profile other than Normal has been chosen.
Ciphering is currently not being provided by
the network.
The keypad is locked.
The network is preferred and can be used.
The card lock or phone lock is on.
A secure WAP connection is established.
The network is forbidden and cannot be used.
You have received an e-mail message.
Your home network is within range and can be
used.
An ongoing call.
You have received a multimedia message.
A chat session is in progress.
You have received a text message.
You have received a voice message.
86
Icon
Phone book
You have received a WAP push message.
You can enter the phone book by pressing
The infrared port is on.
A home number in the phone book.
Infrared communication is in progress.
A work number in the phone book.
A GPRS session is in progress.
A mobile number in the phone book.
Line 1 is in use for outgoing calls.
An e-mail address in the phone book.
Icons
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
A picture is connected to the contact.
Messages
A text message is saved on the SIM card.
A voice message has not been checked.
Icon
Description
The message has not been sent.
The message has been sent.
A message has been delivered or read by the
recipient.
A sent message that has expired or been
rejected by the recipient.
A message has not been read.
Pre-defined message template (not editable).
A message has been read.
User-defined message template.
Only part of a read e-mail message is saved in
the phone.
Only part of an unread e-mail or a multimedia
message is saved in the phone.
A read message will be deleted the next time
you connect to the server.
An unread message will be deleted the next
time you connect to the server.
A multimedia message is playing.
A multimedia message has been stopped.
A multimedia message has been paused.
Picture could not be shown.
A damaged message.
A business card is attached to a multimedia
message.
A read picture message.
An event is attached to a multimedia message.
An unread picture message.
Icons
This is the Internet version of the user's guide. © Print only for private use.
87
Icon
Description
A theme is attached to a multimedia message.
A multimedia message contains a melody.
A multimedia message contains a recorded
sound.
Cursor in a multimedia message.
More message options.
Chat message prompt.
Icon
Description
A polyphonic melody saved in My sounds.
Fun & Games/Composer
Turns the indicator light on and off.
Turns backlight on and off.
Turns vibrating alert on and off.
Starts and stops a melody loop.
Increases and decreases the volume one step.
Calls
A missed call in the call list.
An answered call in the call list.
A dialed number in the call list.
A volume between 0 and 15 has been selected.
Whole note, half note, 1/4 note.
1/8 note, 1/16 note, 1/32 note.
Fun & Games
A standard melody saved in My sounds.
88
Icons
This is the Internet version of the user's guide. © Print only for private use.
Index
Alarm clock 66
Animations 18
Answering mode 24
Area information 56
Battery 6
Business cards 32
Calculator 67
Call costs 34
calling card 38
credit limit 35
minute minder 22
Call time 34
Calls
accept 41
answer 7, 28
automatic re-dialling 27
call list 29
divert 35
emergency 28
fixed dialling 40
groups 32
international 27
make 7, 27
missed 28
put on hold 36
receive 7, 28
reject 28
restrict 39
speed dialling 33
Carrying strap 75
Cell information 56
Charging (battery) 6
Chat 55
Conference calls 37
Contacts 30
Contrast (display) 23
Data calls 66
Declaration of conformity 84
Display
contrast 23
greeting 24
help texts 11
icons 85
light 23
Diverting calls 35
Downloading 64
E-mail 59
gateway 46, 52
settings 43, 46, 49
Emergency calls 28
Error messages 73
Events 68
Fixed dialling 40
Games 69
memory status 74
GPRS 47
Greeting 24
Groups 32
closed user groups 41
conference calls 37
GSM frequencies 4
Handsfree 24
Index
This is the Internet version of the user's guide. © Print only for private use.
89
Help texts 11
Icons (display) 85
Infrared port 26
International
calls 27
emergency number 28
Internet, see WAP 62
Key functions 8
Key sound 22
Keypad lock 24
Language (display) 22
Locks
keypad 24
phone 71
SIM card 70
Master reset 26
Melodies, see Ring signals 20
Memory
full 75
90
status 74
Menu language 22
Menu overview 13
Minute Minder 22
Missed calls 28
MMS, see Multimedia messages 56
Mobile Internet, see WAP 62
Multimedia messages 56
memory status 74
Multitap text input 14
My numbers 24
My shortcuts 25
Picture messages 52
Pictures 18
animations 18
background picture 18
exchange 19
memory status 74
PIN
change 71
enter 7
PIN2 71
Profiles 25
PUK 71
Networks 7, 41
Quick keys 9
Online services 12
Own number 24
Redialling 27
Reset 26
Ring signals 20
Pause 11
Personal ring signal 22
Phone book 29
memory status 74
SIM card 29
Phone lock 71
Screen saver 19
Security
phone lock 71
SIM card 70
WAP 48
Index
This is the Internet version of the user's guide. © Print only for private use.
Shortcuts 9, 11, 25
Silent ring signal 20
SIM card 6, 12
copy contacts 33
lock 70
Phone book 29
unblock 71
SMS, see Text messages 51
Sony Ericsson
Mobile Internet 17
web site 75
Sound recorder 68
Sounds
memory status 74
Speed dialling 33
Stopwatch 67
Strap 75
T9 Text input 15
Text messages 51
E-mail gateway 46, 52
memory status 74
Themes 17
memory status 74
Time settings 23
Timer 67
Turning the phone on/off 7
Two voice lines 38
Vibrating alert 22
Voice mail 34
WAP 62
bookmarks 63
downloading 64
options 63
security 48
settings 43
settings (manual) 44
settings (text message) 43
settings (wizard) 44
Warranty 81
Index
This is the Internet version of the user's guide. © Print only for private use.
91

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:01:02 11:10:48
Producer                        : Acrobat Distiller 4.05 for Windows
Author                          : sonya_s
Title                           : T310UG.book
Creator                         : FrameMaker 5.5.6p145
Modify Date                     : 2003:01:02 11:24:09+01:00
Page Count                      : 89
Page Mode                       : UseOutlines

EXIF Metadata provided by EXIF.tools