Sony 55364J GSM/WCDMA/LTE, BT, DTS/UNII a/b/g/n/ac and NFC Data Transmitter User Manual PY7 55364J SG

Sony Mobile Communications Inc GSM/WCDMA/LTE, BT, DTS/UNII a/b/g/n/ac and NFC Data Transmitter PY7 55364J SG

Contents

PY7-55364J_SG__

Download: Sony 55364J GSM/WCDMA/LTE, BT, DTS/UNII a/b/g/n/ac and NFC Data Transmitter User Manual PY7 55364J SG
Mirror Download [FCC.gov]Sony 55364J GSM/WCDMA/LTE, BT, DTS/UNII a/b/g/n/ac and NFC Data Transmitter User Manual PY7 55364J SG
Document ID3309984
Application ID0jOYNInPdBntEFqVjfo7tw==
Document DescriptionPY7-55364J_SG__
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.71kB (196386 bits)
Date Submitted2017-03-09 00:00:00
Date Available2017-09-05 00:00:00
Creation Date2016-12-20 15:06:27
Producing SoftwareAntenna House PDF Output Library 6.3.815 (Windows (x64))
Document Lastmod2017-01-24 18:14:15
Document TitlePY7-55364J_SG__
Document CreatorAH XSL Formatter V6.3 MR3 for Windows (x64) : 6.3.4.25128 (2016/07/01 17:39JST)

Device basics
Projection window (Laser aperture)
Power key
Volume keys
NFC
7 8
Memory card tray
Charger/USB Type-C™ cable port
LED indicator
HDMI™ Type-D port
microSD
To insert the memory card
1 Drag out the memory card tray using your fingernail.
2 Firmly place the memory card in the correct orientation
into the tray as shown in the illustration.
3 Gently push the tray back into the slot until it fits into
place.
To turn on the device
It is important to use the provided USB Type-C charger
when charging your device, as other types of USB
chargers may damage or not charge your device.
1 Remove the slot cover as show in the illustration.
2 Plug the power cable into its slot as shown in the
illustration.
3 Gently reattach the slot cover.
4 Plug the charger into the power outlet. The LED indicator
next to the power cable slot lights up briefly. Make sure to
remove the protection film from the front of the device
before using it.
5 Press and hold the power key until the volume buttons light
up.
The projection starts approximately 30 seconds after the
device is turned on. To turn off the device, press and hold
the power key then tap power off on the touchscreen.
To project the touchscreen
10:35
1 Place the device on a clean, flat, horizontal surface as
shown in the illustration. Make sure that there are no
obstructions in the projection area.
2 Navigate the projected screen using your finger.
The device will automatically pause projection if it is
moved or lifted during operation.
The first time you start your device, a setup guide helps
you to configure basic settings, personalise your device
and sign in to your accounts, for example a Google™
account.
To project onto a wall
10:35
1 Place the device next to the wall in the correct orientation
as shown in the illustration.
2 To increase or decrease the projection area, reposition the
device further from or closer to the wall.
Touch functions are only available when the device is
projecting onto a horizontal surface, or onto a vertical
surface from a short distance.
Support for you
Access our support website directly on your device by
visiting support.sonymobile.com, to find user guides,
downloadable content, troubleshooting tips and contact
information.
Even if you don’t have a network connection, you can
access support contact information on your device.
Depending on the country or region where you purchased
your device, you can find this information directly in the
Support application.
To access the Support application
1 From your Home screen, tap
2 Find and tap
Connect to the internet when using the Support
application for the best available support.
Warranty and usage guidelines
For information about warranty and safety guidelines,
please read the Important information provided under
Settings > About projector > Legal information on your device.
To view the CE mark and the FCC ID
• Remove the slot cover as shown in the illustration.
To see the full text of the EU declaration of conformity,
visit: http://www.compliance.sony.de/.
To view the regulatory compliance mark
• Open the dialpad, then enter *#07#.
Legal information
Publication number: XXXX-XXXX.1
This Startup guide is published by Sony Mobile Communications Inc. or its local affiliated company, without
any warranty. Improvements and changes to this Startup guide necessitated by typographical errors,
inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony
Mobile Communications Inc. at any time and without notice. Such changes will, however, be incorporated
into new editions of this Startup guide. All illustrations are for illustration only and may not accurately depict
the actual device.
See regulatory information such as the device CE mark in the relevant label tray in the device.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. Visit www.sonymobile.com/globalen/legal/ for more information.
Manufacturer: Sony Mobile Communications Inc., 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo,
140-0002 Japan. For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium.
© 2017 Sony Mobile Communications Inc. All rights reserved.
Supported frequency bands
Some frequency bands might be turned off in certain markets or by certain operators.
G1109
WLAN, 2.4G/5G, NFC
Startup guide
Xperia™ Projector
G1109
Sony Mobile Communications Inc.
4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo, 140-0002 Japan
XXXX-XXXX.1

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2016:12:20 15:06:27+01:00
Modify Date                     : 2017:01:24 18:14:15+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : 
Title                           : 
Creator Tool                    : AH XSL Formatter V6.3 MR3 for Windows (x64) : 6.3.4.25128 (2016/07/01 17:39JST)
Metadata Date                   : 2017:01:24 18:14:15+09:00
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Version ID                      : 1
Document ID                     : uuid:cc436f67-8fc6-43f6-89b8-87008ec43d11
Instance ID                     : uuid:e8da1935-44ad-4bb0-9e7b-2173b43ef50e
Producer                        : Antenna House PDF Output Library 6.3.815 (Windows (x64))
Trapped                         : False
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY7-55364J

Navigation menu