Sony 78553D GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC User Manual 20171107 v1 PY7 78553D UserMan

Sony Mobile Communications Inc GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC 20171107 v1 PY7 78553D UserMan

User Manual_20171107_v1 - PY7-78553D_UserMan

Download: Sony 78553D GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC User Manual  20171107 v1   PY7 78553D UserMan
Mirror Download [FCC.gov]Sony 78553D GSM/WCDMA/LTE Phone+Bluetooth, DTS/UNII a/b/g/n/ac and NFC User Manual  20171107 v1   PY7 78553D UserMan
Document ID3639864
Application ID0SnoJl86ZhP9F6mvZunuCg==
Document DescriptionUser Manual_20171107_v1 - PY7-78553D_UserMan
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.18kB (77283 bits)
Date Submitted2017-11-15 00:00:00
Date Available2018-05-14 00:00:00
Creation Date2017-09-21 10:21:04
Producing SoftwareAntenna House PDF Output Library 6.4.1077 (Windows (x64))
Document Lastmod2017-11-07 19:06:09
Document TitleUser Manual_20171107_v1 - PY7-78553D_UserMan
Document CreatorAH XSL Formatter V6.4 MR5 for Windows (x64) : 6.4.7.29948 (2017/07/31 11:23JST)

Device basics
Charging/Notification light
NFC
Fingerprint sensor
Volume/Zoom key
Power key
Nano SIM/Memory card slot
Camera key
Charger/USB Type-C™ cable port
To insert the nano SIM cards and the
memory card
Do not cut your SIM cards, as this may damage your
device.
1 Drag out the SIM card tray.
2 Insert the memory card in the correct orientation into
the memory card slot, as shown in the illustration.
3 Place the main SIM card (SIM1) securely in the SIM card
tray, as shown in the illustration.
4 Place the second SIM card (SIM2) securely in the SIM
card tray, as shown in the illustration.
5 Gently push the SIM card tray back into the slot until it
fits into place.
To turn on your device
It is recommended to charge the battery for at least 30
minutes before you turn on your device for the first
time. It is important to use the USB Type-C cable
provided when charging your device, as other types of
USB cables can damage your device.
1 Press and hold down the power key
until the device
vibrates.
2 Wait a moment for the device to start.
To activate the screen
• Briefly press the power key
Screen protection
Before using your device, remove the protection film by
pulling up on the protruding tab.
Screen covers and protectors may help you protect your
device against damage. We recommend you use only those
screen covers intended for your Xperia™ device. The use of
third party screen protection accessories may prevent your
device from working correctly by covering sensors, lenses,
speakers, or microphones and can invalidate the warranty.
Support for you
Use the Support app to find your device’s model name,
software information, help topics and support tools. Visit
support.sonymobile.com from the Support app or any
browser for user guides, troubleshooting tips, support
forum and support contact information.
You can find support contact information in the Support
app even without a network connection. The Support
app is not available in all countries and regions.
To access the Support app
• Find and tap
Warranty, SAR and usage guidelines
For information about warranty, SAR (Specific Absorption
Rate) and safety guidelines, please read the Important
information provided under Settings > System > About
phone > Legal information on your device.
Transferring contacts and content
For transferring contacts, messages, photos or other data
from an old device to your new device, we recommend that
you use the Xperia Transfer application.
Visit https://www.sonymobile.com/xperiatransfer for more
information.
To view the CE marking and the FCC ID
Sony Mobile
Communications Inc.
4-12-3 Higashi-Shinagawa,
Shinagawa-ku Tokyo,
140-0002 Japan
1 Drag out the SIM card tray.
2 Remove the memory card from its slot.
3 Drag out the label strips simultaneously, as shown in the
illustration. To see the full text of the EU declaration of
conformity, visit: http://www.compliance.sony.de/.
4 To view the FCC ID, turn over your device. The FCC ID is
displayed on the other side of the label strips.
To view the regulatory compliance
mark
• Open the phone dialer, then enter *#07#.
Legal information
Publication number: 1312-3482.1
This Startup guide is published by Sony Mobile Communications Inc. or its local affiliated company,
without any warranty. Improvements and changes to this Startup guide necessitated by typographical
errors, inaccuracies of current information, or improvements to programs and/or equipment, may be
made by Sony Mobile Communications Inc. at any time and without notice. Such changes will, however,
be incorporated into new editions of this Startup guide. All illustrations are for illustration only and may
not accurately depict the actual device.
See regulatory information such as the device CE marking in the relevant label tray in the device.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved.
Visit https://www.sonymobile.com/global-en/legal/ for more information.
Manufacturer: Sony Mobile Communications Inc., 4-12-3 Higashi-Shinagawa, Shinagawa-ku, Tokyo,
140-0002 Japan. For EU product compliance: Sony Belgium, bijkantoor van Sony Europe Limited, Da
Vincilaan 7-D1, 1935 Zaventem, Belgium.
© 2018 Sony Mobile Communications Inc. All rights reserved.
Supported frequency bands
Some frequency bands might be turned off in certain markets or by certain operators.
You can find your model number under Settings > System > About phone.
H4213
UMTS HSPA+ (Bands 1, 2, 5, 8) GSM GPRS/EDGE 850, 900, 1800, 1900 LTE (Bands 1, 2, 3, 5, 7, 8, 20, 38)
WLAN, 2.4G/5G, NFC
H4223
UMTS HSPA+ (Bands 1, 2, 5, 8) GSM GPRS/EDGE 850, 900, 1800, 1900 LTE (Bands 1, 2, 3, 5, 7, 8, 28, 38,
39, 40, 41M) WLAN, 2.4G/5G, NFC
GSM 850/900 : Power Class 4, DCS(1800)/PCS(1900) : Power Class 1, UMTS : Power Class 3,
LTE : Power Class 3, 2.4GHz<100mW, 5.15-5.35GHz<200mW, 5.47-5.725GHz<200mW, NFC 13.56MHz
Startup guide
1312-3482.1

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:09:21 10:21:04+01:00
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Keywords                        : Template:, StartUpGuide_A7_Booklet_Print, Publ, GUID:, GUID-4E98F3AE-7D25-43EE-8BBC-00026375F26C, Publ, Version:, 1
Modify Date                     : 2017:11:07 19:06:09+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : 
Title                           : 
Creator Tool                    : AH XSL Formatter V6.4 MR5 for Windows (x64) : 6.4.7.29948 (2017/07/31 11:23JST)
Metadata Date                   : 2017:11:07 19:06:09+08:00
Version ID                      : 1
Document ID                     : uuid:c086a05e-88f9-4953-953e-ff74540214b0
Instance ID                     : uuid:efc1e9fa-318c-41c0-a85e-f6f3401a771a
Producer                        : Antenna House PDF Output Library 6.4.1077 (Windows (x64))
Trapped                         : False
Page Count                      : 4
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PY7-78553D

Navigation menu