Sony 93041M Mobile Phone User Manual PY7 93041M SAR statement

Download:
Mirror Download [FCC.gov]
Document ID	3103790
Application ID	+QrmVBSGNygLS31iX0ICkQ==
Document Description	PY7-93041M_SAR_statement__
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.9kB (98720 bits)
Date Submitted	2016-08-18 00:00:00
Date Available	2017-02-14 00:00:00
Creation Date	2017-12-12 20:58:50
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-12-12 20:58:50
Document Title	PY7-93041M_SAR_statement__
Document Creator	PScript5.dll Version 5.2.2

Radio Wave Exposure and
Specific Absorption Rate
(SAR) Information
Important Information United
States
THIS PHONE MODEL HAS BEEN
CERTIFIED IN COMPLIANCE WITH THE
GOVERNMENT'S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
The SO-02J Series mobile phones have
been designed to comply with
applicable safety requirements for
exposure to radio waves. Your wireless
phone is a radio transmitter and receiver.
It is designed to not exceed the limits* of
exposure to radio frequency (RF) energy
set by governmental authorities. These
limits establish permitted levels of RF
energy for the general population. The
guidelines are based on standards that
were developed by international
scientific organizations through periodic
and thorough evaluation of scientific
studies.
The standards include a safety margin
designed to assure the safety of all
individuals, regardless of age and health.
The radio wave exposure guidelines
employ a unit of measurement known as
the Specific Absorption Rate (SAR). Tests
for SAR are conducted using
standardized methods with the phone
transmitting at its highest certified
power level in all used frequency bands.
While there may be differences between
the SAR levels of various phone models,
they are all designed to meet the
relevant guidelines for exposure to radio
waves. For more information on SAR,
please refer to the important
information chapter in the User Guide.
The highest SAR value as reported to the
authorities for this phone model when
tested for use by the ear is 0.93 W/kg*,
when worn on the body is 0.88 W/kg*
and when WiFi hotspot mode is 0.80 W/
kg. For body-worn operation, this phone
has been tested and meets the FCC RF
exposure guidelines. Please use an
accessory designated for this product or
an accessory which contains no metal
and which positions the handset a
minimum of 15 mm from the body.
For devices which include “WiFi
hotspot” functionality, SAR
measurements for the device operating
in WiFi hotspot mode were taken using a
separation distance of 10 mm.
Use of third-party accessories may result
in different SAR levels than those
reported.
** Before a phone model is available for
sale to the public in the US, it must be
tested and certified by the Federal
Communications Commission (FCC) that
it does not exceed the limit established
by the government-adopted
requirement for safe exposure*. The
tests are performed in positions and
locations (i.e., by the ear and worn on
the body) as required by the FCC for
each model. The FCC has granted an
Equipment Authorization for this phone
model with all reported SAR levels
evaluated as in compliance with the FCC
RF exposure guidelines. While there may
be differences between the SAR levels of
various phones, all mobile phones
granted an FCC equipment
authorization meet the government
requirement for safe exposure. SAR
information on this phone model is on
file at the FCC and can be found under
the Display Grant section of http://
transition.fcc.gov/oet/ea/fccid/ after
searching on FCCID PY7-93041M.
Additional information on SAR can be
found on the Mobile Manufacturers
Forum EMF website at
http://www.emfexplained.info/.
In the United States, the SAR limit for mobile
phones used by the public is 1.6 watts/
kilogram (W/kg) averaged over one gram of
tissue. The standard incorporates a margin of
safety to give additional protection for the
public and to account for any variations in
measurements.
** This paragraph is only applicable to
authorities and customers in the United
States.
FCC Statement for the USA
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Any change or modification not
expressly approved by Sony may void
the user's authority to operate the
equipment.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This
equipment generates, uses and can
radiate radio frequency energy and if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation.
If this equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
･ Reorient or relocate the receiving
antenna.
･ Increase the separation between the
equipment and receiver.
･ Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
･ Consult the dealer or an experienced
radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Extract
Create Date                     : 2016:08:08 18:43:02+09:00
Modify Date                     : 2016:08:11 17:23:43+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:08:11 17:23:43+09:00
Format                          : application/pdf
Title                           : 
Creator                         : 
Document ID                     : uuid:d1da55fe-88a9-4d14-91a4-c8a4175488de
Instance ID                     : uuid:44cdde0e-cd5b-4ce7-ba17-f53675c91c15
Page Layout                     : SinglePage
Page Count                      : 3

EXIF Metadata provided by EXIF.tools